The LightWorks
Model LW1 Manual
CONTENTS
WELCOME TO SOTA ..................................................................................................... 2
BEFORE USING ............................................................................................................... 2
LEARN MORE ................................................................................................................. 2
COMPLEMENTARY UNITS .......................................................................................... 2
COMPLETE UNIT INCLUDES ...................................................................................... 3
DO NOT USE .................................................................................................................... 3
CAUTIONS ....................................................................................................................... 3
SUMMARY OF LIGHTS ................................................................................................. 4
HOW TO USE THE LIGHTWORKS ............................................................................. 4
How it Should Feel ...................................................................................................... 5
Typical Use ................................................................................................................... 5
HAND PADDLE LIGHTS .............................................................................................. 6
TIMING, MODES AND OPTIONS ............................................................................... 6
OUTPUT OF MODES ...................................................................................................... 6
JOULES OUTPUT ............................................................................................................ 6
ELECTRICAL SPECIFICATIONS ................................................................................. 7
Power Requirements ................................................................................................... 7
Optional Power Input ................................................................................................. 7
Output Specications.................................................................................................. 7
TROUBLESHOOTING .................................................................................................... 8
COUNTRIES THAT PARTICIPATED IN MANUFACTURING .............................. 8
REPLACEMENT ACCESSORIES .................................................................................. 8
WARRANTY..................................................................................................................... 8
REPAIRS ............................................................................................................................ 8
© 2007-2017 SOTA Instruments Inc. Page 1 of 8| www.sota.com
The LightWorks Model LW1 Manual
WELCOME TO SOTA
Thank you for allowing us to be part of your Wellness Team.
The LightWorks is a consumer product designed to be used as part of a Wellness
Lifestyle. A commitment to healthy lifestyle choices is an important factor in the
journey to Wellness.
The SOTA LightWorks combines the ancient wisdom of color and light with the gentle
frequencies and LEDs of modern technology to gently awaken the body’s natural
tendency towards health and well-being.
The LightWorks is designed to be used independently, but can also be used together
with any of the SOTA Products.
With proper care, your LightWorks should provide you many years of trouble-free
use.
Please understand that results will vary.
BEFORE USING
Please read this manual thoroughly before using your LightWorks.
Please note information in this manual is subject to change.
For the most up-to-date manual, please visit our website www.sota.com/manuals.
LEARN MORE
To learn more about the LightWorks we invite
you to visit the SOTA website:
www.sota.com
The website offers How-to Videos, Frequently
Asked Questions, The SOTA Products User Guide,
SOTA News ... and more.
COMPLEMENTARY UNITS
The LightWorks can also be used with:
• The LightWorks Hand Paddle Set
© 2007-2017 SOTA Instruments Inc. Page 2 of 8| www.sota.com
The LightWorks Model LW1 Manual
COMPLETE UNIT INCLUDES
• One (1) LightWorks Unit
• One (1) Red/Near Infrared Hand Paddle
• One (1) LightWorks Cord
• One (1) Wall Adaptor
• One (1) Carrying Case
• One (1) Product Manual
DO NOT USE
1. In the following situations as safety has not been explored:
a. In the case of pregnancy.
b. In the area of an active implanted device
such as a pacemaker, etc.
c. On the eyes.
2. As with all electrical products do not use near
water, when driving a car or when operating
heavy equipment.
CAUTIONS
1. Without proper airow, there is a potential
for the LEDs to overheat and cause a burn
to the skin. When in use, please ensure there
is proper airow around the head of the
paddle.
2. When using heat-producing or heat-sensitive
ointments, lotions or medications as a skin burn may occur.
3. If you are on light-sensitive medications, please consult your health care provider
prior to using the LightWorks.
4. While this technology is generally considered safe, there exists potential for rare
individual reactions that cannot reasonably be foreseen. Therefore, your use of
the SOTA Products constitutes your agreement that you are responsible for your
decision to use the technology.
© 2007-2017 SOTA Instruments Inc. Page 3 of 8| www.sota.com
The LightWorks Model LW1 Manual
SUMMARY OF LIGHTS
GREEN: Indicates which mode is selected.
ORANGE: Indicates that the Automatic Option is in operation.
HOW TO USE THE LIGHTWORKS
1. Insert the power plug from the AC-DC Wall Adaptor into the unit and plug the
adaptor into an electrical outlet.
2. Remove the protective cover from the lens on both sides of the Hand Paddle.
3. Plug one end of the LightWorks Cord into the Hand
Paddle and the other end into the Base. When
properly inserted, the plugs will click securely into
the jacks.
4. Push the ON/OFF/MODE button. All the lights on
the base will ash in sequence to indicate the unit
is ready for use. The unit starts in the Automatic
(AUTO) Option and begins with the Constant
Mode. The AUTO light will ash continuously.
5. Select one side of the Hand Paddle by pushing the
Hand Paddle button. Only one side of the Hand
Paddle is operational at a time. Push the Hand Paddle button to check the operation
of each side of the Hand Paddle.
6. The unit can be left in AUTO or a specic Mode can be selected.
a. In AUTO, the unit will operate on the selected side of the Hand Paddle for 32
minutes—4 minutes on each of the 8 Modes. The unit sounds a ‘beep’ after each 4
minute Mode has completed.
b. Manual Option: Choose a specic Mode by pushing the ON/OFF/MODE button
briey. A GREEN light indicates which mode is selected. The Constant Mode
operates for 30 minutes and Modes A - G run for 15 minutes each.
c. To return to the AUTO Option continue pressing the ON/OFF/MODE button
until the ORANGE light comes on. See ‘Output of Modes’ on page 6 for the
frequency of each Mode.
7. The LED lights on the Hand Paddle should be placed on or very close to the skin.
Clothing will block the light.
© 2007-2017 SOTA Instruments Inc. Page 4 of 8| www.sota.com
The LightWorks Model LW1 Manual
8. When any of the timed cycles nish, the unit will beep. To continue with another
cycle, push the ON/OFF/MODE button within 20 seconds of the beep. The unit
turns itself off if the ON/OFF/MODE button is not pushed within this time.
9. To turn the unit off before the end of a cycle, hold the ON/OFF/MODE button down
for a full two seconds.
10. Unplug the Wall Adaptor when not in use.
Note: With the unit off, when unplugging the Wall Adaptor or the LightWorks Cord,
the lights on the Hand Paddle may ash briey—this is normal.
Notes:
Hand Paddle: The Hand Paddle can be changed from side to side at any time during
a timed session.
The Hand Paddle casing for the LED lights may become very warm with extended
use. If it feels uncomfortable, turn it off and allow it to cool before continuing.
Timing: When either the Mode or Hand Paddle setting is changed the timing is reset.
Cleaning the Hand Paddle Lenses: Use a damp cloth. Do not spray water directly
on the Hand Paddle as this risks moisture entering the casing. Do not use abrasive
chemicals on the plastic.
HOW IT SHOULD FEEL
Most individuals will not feel any sensation while using the LightWorks.
TYPICAL USE
Length of Session: It is best to begin slowly and then gradually increase the length
of each session. Daily use varies from 4 to 32 minutes or more.
Length of Use: When used as part of a Wellness Protocol, use every other day.
For specic purposes, longer and more frequent sessions may be more benecial.
Generally, the LightWorks can be used as needed.
Placement: The Hand Paddle may be kept on one location or it may be moved at any
time to different locations.
Drink plenty of water: It’s important to drink enough water when using the unit.
Drinking ozonated water is especially helpful.
© 2007-2017 SOTA Instruments Inc. Page 5 of 8| www.sota.com
The LightWorks Model LW1 Manual
HAND PADDLE LIGHTS
Red LED lights: Features 60 high-intensity Red LED lights with a wavelength of 660
nanometers (nm) and a light output of approximately 245 milliwatts (mW).
Near Infrared (NIR) LED lights: Features 55 high-intensity Near Infrared invisible
LED lights with a wavelength of 880 nanometers (nm) plus 5 visible Red LED lights
with a light output of approximately 270 milliwatts (mW).
When this side of the Hand Paddle is selected, only the 5 Red LED lights will be visible
to the eye.
TIMING, MODES AND OPTIONS
AUTO Option
When using the AUTO option, the LightWorks is timed for 4 minutes on each of the
8 Modes for a total of 32 minutes.
MANUAL Option
When using the MANUAL option, the Constant Mode is timed for 30 minutes.
Modes A - G operate for 15 minutes each.
OUTPUT OF MODES
The table indicates the frequency output of each Mode.
For more information about the Modes, please visit our website at www.sota. com.
MODE Constant A B C D E F G
Frequency
(Hz)
N/A 292 584 1168 2336 4672 73 146
JOULES OUTPUT
Research indicates that a minimum output of 4 Joules per cm2 is required to be
effective. The following table on page 7 indicates the Joules per cm
Paddle.
© 2007-2017 SOTA Instruments Inc. Page 6 of 8| www.sota.com
2
for each Hand
The LightWorks Model LW1 Manual
Manual Option Automatic Option
Paddle Color
Red 15 4 9
NIR 17 4 10
Orange 5 1 3
Yellow 9 2 5
Green 10 2 6
Blue 26 6 15
In Automatic Option, output is per 32 minutes (4 minutes in each Mode).
Constant Mode
Joules/cm
In Manual Option, Modes A - G is per 15 minutes and
Constant Mode is per 30 minutes.
2
Modes A - G
ELECTRICAL SPECIFICATIONS
POWER REQUIREMENTS
12 Volts DC @ 1.5 Amps, Tip or Center Positive.
Joules/cm
All Modes
2
Joules/cm
2
Caution: Exceeding the voltage rating or reverse connection may result in injury or
unit failure. This will void the warranty.
OPTIONAL POWER INPUT
To operate the LightWorks from a 12 Volt DC source, such as an automobile battery
or an appropriate Solar Panel, purchase a Universal Power Cord with Tip or Center
Positive.
OUTPUT SPECIFICATIONS
Red LEDs: Wavelength of 660 nm (+/- 10 nm) and a light output of approximately
*
245 milliwatts (mW)
.
Near Infrared LEDs: Wavelength of 880 nm (+/- 10 nm) and a light output of
*
approximately 270 milliwatts (mW)
.
Frequency Tolerance: +/- 1 Hz.
*Light output measured using a Newport Optical 1830-C Light Meter.
© 2007-2017 SOTA Instruments Inc. Page 7 of 8| www.sota.com
The LightWorks Model LW1 Manual
TROUBLESHOOTING
A Troubleshooting Guide for the LightWorks is available at
www.sota.com/manuals. This Guide is a great tool to check if you are experiencing
any issues with your unit.
COUNTRIES THAT PARTICIPATE IN MANUFACTURING
The manufacturing of the SOTA Products is a global collaboration. The following
countries participate in the making of the LightWorks (listed in alphabetical order):
Canada, China and Hong Kong.
REPLACEMENT ACCESSORIES
To replace your accessories, contact your supplier.
WARRANTY
The LightWorks is covered by a three (3) year limited warranty. Please keep proof of
purchase. Warranty is void if the failure is due to abuse or negligence. SOTA reserves
the right to make changes to the LightWorks without obligation.
REPAIRS
Please contact your supplier for return instructions. Or, for information about your
closest repair depot, contact repairs@sota.com or
Toll-Free: 1.800.224.0242 (Canada & USA) Tel: 1.250.770.2023
Made in China. Designed and Engineered in Canada.
• The SOTA units are consumer products designed to be used as part of a Wellness Lifestyle • The SOTA units are not medical devices nor are they
intended to diagnose, treat or cure any medical or health condition • The use, safety or effectiveness of the SOTA units has not been approved by any
government agency • Please consult a health practitioner for any medical or health condition • Results using the SOTA Products will vary for each
© 2007-2017 SOTA Instruments Inc. Page 8 of 8 | www.sota.com
person • Please note that all purchases of SOTA Products are deemed to be made in Penticton, BC, Canada •
Loading...