www.xantrex.com
© 2004 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International. DS20040609R06_xpf. Printed in Canada.
Xantrex Technology Inc.
Headquarters
8999 Nelson Way
Burnaby, British Columbia
Canada V5A 4B5
604 422 8595 Phone
800 667 8422 Sales & Support
604 421 3056 Fax
prg.info@xantrex.com
5916 195th Street NE
Arlington, Washington
USA 98223
360 435 8826 Phone
360 925 5144 Fax
Edificio Diagonal 2A,
C/ Constitución 3, 4º2ª
08960 Sant Just Desvern
Barcelona, Spain
General Tel: +34 93.470.5330
General Fax: +34 93.473.6093
XPF Series
350 to 840 W Laboratory DC Power Supply
Dual Output DC Power Supply with Powerflex
The Xantrex XPF is a new type of bench power supply designed to meet the need for flexibility in the
choice of voltage and current. Typically, the maximum voltage and maximum current are not required
simultaneously. The PowerFlex design enables higher currents to be generated at lower voltages within
an overall power limit envelope. This is achieved by using the latest switch-mode technology.
The XPF Series are dual output DC power supplies with two completely independent and isolated
outputs. If required, the outputs can be wired in series or parallel to achieve up to double the maximum
voltage or double the maximum current.
Product Features
350 to 840 W Laboratory DC Power Supply
in constant voltage mode. Typically >5k
in constant current mode (voltage limit at max.)
0.2% ± 1 digit
0.5% ±1 digit
PowerFlex
P
ower Envelope
(175W max. per output)
XPF 35-10
OA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A
35V
30V
25V
20V
15V
10V
5V
0V
The maximum current at any
voltage setting is limited by
the power envelope which is
set to give 5A at 35V rising
to 10A at 12V under all AC
supply conditions (both outputs
loaded). At lower voltages the
power is restricted by the
10 amps current maximum.
PowerFlex
P
ower Envelope
(420W max. per output)
XPF 42-20
OA 2A 4A 6A 8A 10A 12A 14A 16A 18A 20A
40V
35V
30V
25V
20V
15V
10V
5V
0V
The maximum current at any
voltage setting is limited by
the power envelope which is
set to give 10A at 42V rising
to 20A at 20V under all AC
supply conditions (both outputs
loaded). At lower voltages the
power is restricted by the
20 amps current maximum.
Loading...