Website: www.sorellefurniture.com
Chandler Hutch/Bookcase
Important Information:
Before assembly, read these instructions. Make sure
all preassembled parts are tight. Store this instruction
manual for future reference.
Made in ASY Vietnam
K
Hutch Assembly Parts
A
H
E
C
F
I
G
A
Top panel ( 1 pc)
B
Left Side panel (1 pcs)
Right Side panel (1 pcs)
C
Bottom panel/Bookcase Base(1pc)
D
Front top rail (1 pc)
E
Shelf Support (4 pcs)
( a )
J
B
D
Fixed Shelf (1 pc)(F)
(G) Adjustable Shelf (1 pc)
(H) Upper Back Rail (1 pc)
( I ) Middle Back Rail (1 pc)
J) Back Bottom Rail (1pc)
Back panel (2 pcs)K
Assembly Hardware
(e). Flat Washer ( 2 pcs)
(f )M6*35mm Cam Bolt (9 pcs)
( b )
Ø3.5 X 15mm Phillips Screw (4 pcs)
M6*32MM Allen Bolt (16 pcs)
( c )
(d)
Allen Key (1PC)
Page 2
(g) Ø14*13 Cam Lock (9 pcs)
(h) Wall Strap Kit (1 Sets)
Hutch Assembly
Insert Six (6) Cam Bolt(h) to Side panel(B&C).
Attach the Fixed shelf (F) to the right side panel( C ) using 32mm bolts(2pcs) , Use Allen key to tighten bolts.
1
Attach the Front top Rail (E) to the right side panel( C ) using 32mm bolts(1pc)+Washer(1pc) ,
Use Allen key to tighten bolts.
Attach the Upper Back Rail (A) and Middle Back Rail (I) and Back- Bottom Rail(J) to the right side panel (C)
by four Cam lock(g) .See Figure 1.
C
f x 6
g x 3
C
2
C
B
C
J
J
Slide the back panel (K) into the grooves as diagram.
H
F
d
c
X 4
I
E
F
Figure 1.
K
K
H
E
F
J
Figure 2.
Page 3
Hutch Assembly
Attach the Left side panel to the Upper Back Rail (A) and Middle Back Rail (I) and Back- Bottom Rail(J)
by four Cam lock(g) .See Figure 2.
3
Attach the Left side panel to the Fixed shelf (F), using 32mm bolts(2pcs) , Use Allen key to tighten bolts.
Attach the Left side panel to the Front top rail (E) , using 32mm bolts(1pc)+Washer(1pc), Use Allen key to tighten bolts.
K
g x 3
I
X 2
J
B
F
B
Tool required
Attach the Top panel (A) to left side panel (B) and right side panel (C) , using 32mm bolts(6pcs)
4
Use Allen key to tighten bolts. See Figure 4.
A
A
E
E
e
c
Figure 3.
C
C
B
c x 6
C
Figure 4.
Page 4
Hutch/Bookcase Base Assembly
Attach the Bottom panel/Bookcase base (D) to left side panel (D) and right side panel (C) ,
5
using 32mm bolts(4pcs) ,
Use Allen key to tighten bolts. See Figure 5.
6
D
C
Attach the Bottom panel/Bookcase base (D) to
by four Cam lock(g) .See Figure 6.
c x 4
,
Back Bottom Rail (J)
A
B
Figure 5.
g x 3
J
D
Figure 6.
Page 5
Hutch Assembly
7
a (4x)
b (4x)
Attach Adjustable Shelf (G) by using Four (4)Shelf Support(a) and Four(4) Phillips Screw(b)
See Figure 7.
G
G
C
B
See Figure 7.
Page 6
Loading...