Sony ericsson T68I, T68Ie WAP Manual
Getting started:
T68i/ie WAP and e-mail
settings
First edition (February 2002)
This manual is published by Sony Ericsson
Mobile Communications AB, without any warranty.
Improvements and changes to this manual
necessitated by typographical errors, inaccuracies
of current information, or improvements to programs
and/or equipment, may be made by Sony Ericsson
Mobile Communications AB at any time and without
notice. Such changes will, however, be incorporated
into new editions of this manual.
All rights reserved.
©
Sony Ericsson Mobile Communications AB, 2002
Publication number: EN/LZT 108 5503 R1A
Please note:
Some of the services in this manual are not
supported by all networks. Please contact your
network operator or service provider if you are
in doubt whether you can use a particular service
or not.
Getting started: T68i/ie WAP and e-mail settings
Setting up WAP and e-mail
Before you start
Make sure you have your GSM network operator’s and/or service provider’s subscription
information at hand before you start setting up WAP and e-mail.
You must have a phone subscription that supports data transmission, and if you want to
use GPRS, a phone subscription that supports this.
What settings do I need?
• To use the WAP browser in your phone, you have to create a specific data account for WAP
and a WAP profile.
• To use the e-mail program in your phone, you have to create a specific data account for
e-mail and an e-mail account.
How do I enter the settings?
Depending on your GSM network operator, you can enter the settings you need in different
ways:
• Settings may already be entered when you buy your phone.
• You can receive settings from your GSM network operator or service provider, for example,
in a text message (SMS).
• You can use a wizard in your phone to help guide you through the relevant settings.
• You can request settings at www.SonyEricssonMobile.com/. You receive the settings in a text
message (SMS).
• You can enter the settings manually. Your GSM network operator or service provider will give
you the settings you need.
Receiving settings in a text message
Your GSM network operator or service provider may be able to send the required data
account, WAP and e-mail settings directly to your phone in a text message (SMS). Contact
your GSM network operator or service provider for details.
To request settings from Sony Ericsson
1.Use a PC to go to
http://www.SonyEricssonMobile.com/. By using the WAP or E-mail Configurators you can
request that a text message be sent to your phone with the settings you need.
2.When the message arrives, New settings received. Install? appears.
• Press
YES to install the new settings. The settings are entered automatically.
• Press NO to cancel installation. A new request for settings is then required, as in step 1.
Setting up with the wizard
If your phone is not set up for WAP, you can ask your GSM network operator or service
provider to provide you with WAP settings. Then you can simply use the wizard in your
phone to help guide you through the relevant settings.
To use the wizard for setting up WAP
1.Scroll to WAP services,
YES, homepage (for example Mobile Internet), YES. The wizard
now starts if no WAP settings exist.
2.Enter and save settings when asked, press
YES to confirm.
1
Getting started: T68i/ie WAP and e-mail settings
Entering the settings manually
WAP
To use WAP, you have to enter settings for the following in the phone:
• Data account — settings for access to a server for WAP browsing. Ask your GSM network
operator for these settings.
• WAP profile — settings for WAP browsing. Ask your GSM network operator for these settings.
To use the e-mail program in the phone to send and receive e-mail messages, you have to
enter settings for the following in the phone:
• Data account — settings for access to a server for e-mail messaging. Ask your network
operator or service provider for these settings.
• E-mail account — settings for e-mail messaging. If you want to use the same e-mail account
in your phone as in your PC, you can use the same e-mail account settings. Ask your e-mail
service provider for these settings.
Data account settings
You can have several data accounts saved in your phone, with different settings for different
purposes (for example, one for WAP and one for e-mail). The main setting for a data account
is the Account type (connection method). You can choose between GPRS data or GSM data.
Note: Please contact your network operator for charging details.
GPRS data account
To be able to use GPRS, you must have a GPRS subscription. Contact your GSM network
operator for details.
To create a GPRS data account manually
1.Scroll to Connect,
YES, Data comm., YES, Data accounts, YES, Add account?, YES.
2.Select GPRS data, YES.
3.Enter a name for the data account,
YES. You can use a name of your own choice.
4.Enter the settings that you have received from your GSM network operator or service provider.
Depending on your network operator or service provider, you may not have to enter all of the
following settings:
• APN (Access point name address) — this can be either an IP address or a text string,
YES.
An IP address looks something like this: 123.4.567.89.
• User id — your user id to log on to the external data network,
YES.
• Password — your password to log on to the external data network, YES.
5.Scroll to
6.Select the account you just created,
Save?, YES.
YES.
7.Select Edit, YES.
2
Loading...