Para obtener una copia en español de esta Guía del Usuario,
visite nuestra página Web en www.SonyEricsson.com
encuentra en Estados Unidos, también puede llamar
al 1-800-374-2776.
Register your new phone, purchase accessories, and see the latest in
products by visiting us at: www.SonyEricsson.com
This manual is published by Sony Ericsson Mobile
Communications (USA) Inc., without any warranty.
Improvements and changes to this manual necessitated by
typographical errors, inaccuracies of current information,
or improvements to programs and/or equipment, may be
made by Sony Ericsson Mobile Communications (USA) Inc.,
at any time and without notice. Such changes will, however,
be incorporated into new editions of this manual.
Trademarks referred to herein are trademarks of their
respective companies.
“Ericsson”, “
ACCESSORIES” are each registered U.S. Trademarks owned
by Telefonaktiebolaget LM Ericsson of Sweden and are used
with permission by Sony Ericsson Mobile Communications
(USA) Inc.
T9 Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928,
and 6,011,554; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No.2238414B; Hong Kong Standard Pat.
Ericsson
L
N
o
f
” and “ERICSSON ORIGINAL
t
o
r
c
o, si se
o
m
No. HK0940329; Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR,
IT,NL,PT.ES,SE,GB; and additional patents are pending
worldwide.
“Microsoft”, “Windows” and the design plus words
“Microsoft Windows” are each either registered and/or
pending U.S. Trademarks owned by Microsoft Corporation
of Redmond, Washington, U.S.A.
The BLUETOOTH trademarks are owned by Bluetooth SIG,
Please read this information before using your mobile
phone.
Recommendations
• Always treat your product with care and keep it in a
clean and dust-free place.
• Do not expose your product to liquid or moisture
or humidity.
• Do not expose your product to extreme high or low
temperatures.
• Do not expose your product to open flames or lit
tobacco products.
• Do not drop, throw, or try to bend your product.
• Do not paint your product.
• Do not use your product when in, or around
aircraft, or areas posted “turn off two-way radio”.
• Do not use your product in an area where a
potentially explosive atmosphere exists.
Some menus/features are operator dependent.
N
o
f
t
o
r
c
o
m
• Do not place your product or install wireless
equipment in the area above your car’s air bag.
• Do not attempt to disassemble your product. Only
Sony Ericsson authorized personnel should perform
service.
• If your mobile phone is equipped with infrared,
c
never direct the infrared ray at anyone’s eye and
r
e
m
make sure that it does not disturb any other
infrared units.
Antenna
Only use an antenna that has been specifically designed
by Sony Ericsson for your mobile phone. Use of
unauthorized or modified antennas could damage your
mobile phone and may violate regulations, causing loss
of performance and SAR levels above the recommended
limits (see below).
u
l
a
i
s
e
1
Guidelines for Safe and Efficient Use
Efficient Use
• Hold your mobile phone as you would any other
phone. Do not cover the top of the phone when in
use, as this affects call quality and may cause the
phone to operate at a higher power level than
needed, thus shortening talk and standby times.
•
Radio Frequency (RF) Exposure
and SAR
Your mobile phone is a low-power radio transmitter and
receiver. When it is turned on, it emits low levels of radio
frequency energy (also known as radio waves or radio
frequency fields).
Governments around the world have adopted
comprehensive international safety guidelines, developed
by scientific organizations, e.g. ICNIRP (International
Commission on Non-Ionizing Radiation Protection) and
IEEE (The Institute of Electrical and Electronics
Engineers Inc.), through periodic and thorough
2Some menus/features are operator dependent.
N
o
t
r
o
f
m
o
c
evaluation of scientific studies. These guidelines establish
permitted levels of radio wave exposure for the general
population. The levels include a safety margin designed
to assure the safety of all persons, regardless of age and
health, and to account for any variations in
measurements.
Specific Absorption Rate (SAR) is the unit of
measurement for the amount of radio frequency energy
absorbed by the body when using a mobile phone. The
SAR value is determined at the highest certified power
c
r
level in laboratory conditions, but the actual SAR level of
e
the mobile phone while operating can be well below this
m
value. This is because the mobile phone is designed to
use the minimum power required to reach the network.
Therefore, the closer you are to a base station, the more
likely it is that the actual SAR level will decrease.
Variations in SAR below the radio frequency exposure
guidelines do not mean that there are variations in safety.
While there may be differences in SAR levels among
mobile phones, all Sony Ericsson mobile phone models
are designed to meet radio frequency exposure
guidelines.
Accessories can significantly affect a mobile phone’s
compliance with the radio frequency exposure guidelines.
For example, the Federal Communication Commission
u
l
a
i
s
e
Guidelines for Safe and Efficient Use
in the U.S. requires that some manufacturers’ accessories
shall be tested, and Sony Ericsson has done so with
respect to its products. To avoid causing loss of
performance or radio frequency exposure levels above the
permissible limits it is recommended that you only use
Sony Ericsson or Ericsson original accessories intended
for use with the mobile phone. If you wear the mobile
phone on your body while it is transmitting, and you do
not use a Sony Ericsson or Ericsson original body worn
accessory, please ensure that the mobile phone is
positioned a minimum of 1.5 cm from your body and
that you are not using an accessory that contains any
metal.
A separate leaflet with SAR information for this mobile
phone model is included with the material that comes
with this mobile phone. This information can also be
found, together with more information on radio
frequency exposure and SAR, on:
www.SonyEricsson.com.
o
o
f
t
r
o
c
N
Electronic Devices
Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may not
Some menus/features are operator dependent.
m
be shielded against the RF signals from your mobile
phone, therefore:
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6”)
inches (15 cm) be maintained between a handheld
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the independent
c
r
research by and recommendations of Wireless
e
Te c h no lo gy Re se a rc h.
m
Persons with pacemakers:
• Should ALWAYS keep the phone more than six
inches from their pacemaker when the phone is
turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to
minimize the potential for interference.
• If you have any reason to suspect that interference
is taking place, turn your phone OFF immediately.
u
l
a
i
s
e
3
Guidelines for Safe and Efficient Use
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
want to consult your service provider or call your local
Sony Ericsson Customer Care Center to discuss
alternatives.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Turn your phone OFF in any facility where posted
notices so require.
4Some menus/features are operator dependent.
o
N
o
f
t
r
o
c
m
Driving
Please check if local laws and regulations restrict the use
of mobile phones while driving or require drivers to use
handsfree solutions. We recommend that you use
Ericsson or Sony Ericsson handsfree solutions intended
for use with your product. Please note that because of
possible interference to electronic equipment, some
vehicle manufacturers forbid the use of mobile phones in
c
their vehicles unless a handsfree kit with an external
r
e
antenna supports the installation.
m
Always give full attention to driving and pull off the road
and park before making or answering a call if driving
conditions so require.
Children
DO NOT ALLOW CHILDREN TO PLAY WITH
YOUR MOBILE PHONE OR ITS ACCESSORIES.
THEY COULD HURT THEMSELVES OR
OTHERS, OR COULD ACCIDENTALLY DAMAGE
THE MOBILE PHONE OR ACCESSORY. YOUR
u
l
a
i
s
e
Guidelines for Safe and Efficient Use
MOBILE PHONE OR ITS ACCESSORY MAY
CONTAIN SMALL PARTS THAT COULD BE
DETACHED AND CREATE A CHOKING
HAZARD.
Disposing of the Product
Your mobile phone should not be placed in municipal
waste. Please check local regulations for disposal of
electronic products.
Power Supply
o
c
Connect the AC power adapter only to designated power
sources as marked on the product. Make sure the cord is
positioned so that it will not be subjected to damage or
stress. To reduce risk of electric shock, unplug the unit
from any power source before attempting to clean it. The
AC power ada pter must not be used outdoors or in damp
areas. Never alter the cord or plug. If the plug will not fit
into the outlet, have a proper outlet installed by a
qualified electrician.
Some menus/features are operator dependent.
o
N
r
o
f
t
Emergency Calls
Mobile phones operate using radio signals, which cannot
guarantee connection under all conditions. Therefore
you should never rely solely upon any mobile phone for
essential communications (e.g. medical emergencies).
Emergency calls may not be possible on all cellular
networks or when certain network services and/or mobile
phone features are in use. Check with your local service
provider.
e
r
c
a
i
m
Battery Use and Care
m
Charge the battery for 4 hours before you use your
mobile phone for the first time. The battery can only be
charged in temperatures between +5°C (+41°F) and
+45°C (+113°F).
A new battery or one that has not been used for a long
time could have reduced capacity the first few times it is
used.
The talk and standby times depend on the actual
transmission conditions when using the mobile phone. If
e
s
u
l
5
Guidelines for Safe and Efficient Use
the mobile phone is used near a base station, less power is
required and talk and standby times are prolonged.
Use only Ericsson or Sony Ericsson branded original
batteries and chargers intended for use with your mobile
phone. Other chargers may not charge sufficiently or
may produce excessive heat. Using other batteries and
chargers could be dangerous.
• Do not expose the battery to extreme temperatures,
never above +60°C (+140°F). For maximum
battery capacity, use the battery in room
temperature.
•Warning! May explode if disposed of in fire.
• Do not expose the battery to liquid.
• Keep out of children’s reach.
• Turn off your mobile phone before removing the
battery.
• Use the battery for the intended purpose only.
• Do not disassemble or modify the battery.
• Do not let the metal contacts on the battery touch
another metal object. This could short-circuit and
damage the battery.
• Do not allow the battery to be put into the mouth.
Battery electrolytes may be toxic if swallowed.
6Some menus/features are operator dependent.
o
N
o
f
t
r
o
c
Disposing of the Battery
The battery should never be placed in municipal waste.
Please check local regulations for disposal of batteries or
call your local Sony Ericsson Customer Care Center for
information.
FCC Statement
i
c
This device complies with Part 15 of the FCC rules.
r
Operation is subject to the following two conditions:
e
(1) This device may not cause harmful interference, and
m
m
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
a
e
s
u
l
Getting to Know Your Phone
7
Getting to Know Your Phone
Diagrams
The following diagrams illustrate the front, back (with
back cover removed), and bottom views of your phone.
1
2
3
4
5
6
Some menus/features are operator dependent.
1 Antenna
2 Earpiece
3 Side Volume Keys
4 Display
5 Left Softkey
6 Keypad
7 Headset Jack
8
8 Joystick
9
(4-way navigation
with center select key)
t
o
9 Right Softkey
N
10 Power (On/Off) Key
10
r
o
f
c
o
l
a
i
c
r
e
m
m
Standby Screen Icons
Once the phone powers up, you will see the standby
screen. You will also see the standby screen when you exit
the menu system. These are all of the icons that could
appear on your standby screen.
11 External Antenna Connector
12 Guide for Attaching Back
Cover
e
13 Back Cover Latch
s
u
14 Battery Connector
15 Accessory Connector
(Handsfree, Charger, FM
Radio, MP3, Chatboard, etc.)
7
Getting to Know Your Phone
1 Alarm () - indicates the alarm is set.
2 Time (01:10) - shows the time.
3 Signal Strength () - shows the relative signal
strength from the wireless system. More bars
indicate a stronger signal (maximum of five bars).
4 Analog/Digital Channel Indicator - shows your
phone’s mode: Analog (
Privacy (
P), or No Network ( ).
5 Roaming (
preferred network is found, an
roaming network is not preferred, an
6 Battery Strength () - shows the relative
strength of your battery. A full icon indicates a
fully-charged battery. If the phone is connected
to external power and the battery is charging, the
battery icon will continuously fill and empty until
the battery is fully charged.
7 Banner - displays your personalized banner or
network information such as
8 Silent Mode () - indicates that your phone will
not make any sounds. Ringer off ( ) indicates that
the ringer is set to off. Press and hold
menu to turn on silent mode.
8Some menus/features are operator dependent.
R) - indicates if you are roaming. If a
A), Digital (D), Voice
t
o
N
R will appear. If the
r will appear.
o
c
r
o
f
Searching.
C to enter a
m
9 Profile () - indicates which profile is currently
active (for instance, the Outdoor profile icon).
10 Call List ( ) - indicates missed calls.
11 Keypad Lock () - indicates that pressing the
keys has no effect. The keypad is locked to prevent
inadvertent key presses. Press and hold
menu to turn on Keypad Lock. Press
12 Accept Calls () - indicates that you have
activated call screening which allows you to reject
c
certain incoming calls.
r
13 Message () - indicates that you have received
me
an email message, voicemail message, text message,
or a browser alert. The number beside the icon
indicates the number of messages you have waiting.
Although you could have over 100 new messages,
the message icon will only indicate 99.
14 Magic Word () - indicates that the Magic Word
feature is active.
15 SMS Chat () - indicates that you are in an
active Chat session.
16 Voi c e M e m o () - indicates that you have a voice
memo recorded.
?
e
s
u
l
a
i
C to enter a
C to unlock.
Getting to Know Your Phone
y
Key Functions
Softkeys
Your phone is equipped with
softkeys. The softkey labels
appear on the bottom of
your display. To use the
softkey functions, press the
left or right key that is under the text label on the screen.
The labels are context sensitive and will change
depending on the feature you are using. For example,
press the left key to select
select the
Keypad Keys
The key functionality varies when you are using the
WAP browser. For more information on browsing and
Some menus/features are operator dependent.
Menu
.
Note!
In most instances, pressing the center of the
joystick will perform the same action as the left
softkey.
N
Left
Softkey
Label
Left
Softkey
Call List
or press the right key to
o
f
t
o
r
Right
Softkey
c
o
Right
Softke
Label
m
the use of the keys while browsing, see “Browser Key
Functions” on page 64.
Power Key
• Press and hold to power the phone On and Off.
Options Key
m
• Enter a menu with options. The options vary
depending on what function you are currently using.
• Press to set the phone to silent or turn on keylock,
l
(from the standby screen).
a
i
Throughout this User’s Guide, the options icon
c
( )will be shown when you can use the Options
r
e
key.
Clear (C) Key
• Delete numbers and letters from the display.
• Delete an item from a list.
• Press and hold to mute/unmute the microphone
during a call.
• Press and hold, from the standby screen, to enter a
menu to lock or unlock the keypad.
• Press and hold, from the standby screen, to enter a
menu to turn on/off silent mode.
u
s
e
9
Getting to Know Your Phone
Joystick
• Move through menus, lists, or text. Tilt up, down, left,
or right to scroll.
• Press down on the joystick to select (same function as
left softkey in most instances).
• Tilt, and briefly hold, right to access the top of your
contact list (contact names beginning with A,B,C ...).
• Tilt, and briefly hold, left to quickly enter Edit
Shortcuts.
1 Key/Voicemail Access
• Press and hold to access Voicemail.
•Enter the digit 1.
0 Key
• Press and hold to enter the international access code
(+). See “Making International Calls” on page 14.
•Enter the digit 0.
Asterisk Key
*.
•Enter
• Press and hold to enter a pause ( ).
• Shift between capital and lowercase letters.
Pound Key
•Enter #.
• Press and hold to enter a stop ( ).
10Some menus/features are operator dependent.
N
o
f
t
o
r
c
o
me
m
Side Volume Keys
• Increase or decrease the volume of the earpiece or
handsfree loudspeaker during a call.
• Enter the Status menu from the standby screen by
pressing the key briefly.
• A long press will activate voice dialing/automatic
speech recognition.
• Press once to silence the ringer.
Numeric Keys 2-9
l
• Enter digits 2-9.
a
i
• Press and hold position number to SuperSpd Dial
c
(dependent on long press setting).
r
• Press and hold to see contacts that correspond with
letters on that particular key (dependent on long press
setting).
u
s
e
Getting Started
Getting Started
Assembly
Before you use your phone:
1 Attach the Battery
2 Attach the Back Cover
3 Charge the Battery
o
f
t
o
N
Some menus/features are operator dependent.
r
Step 1: Attach the Battery
1 Locate the plug at the end
of the wires.
e
2 Insert the plug as shown in
s
u
l
a
i
c
This side up
r
e
m
m
o
c
the diagram. The plug will
only properly fit one way do not force it.
3 Locate the hole at the
bottom of the battery
chamber.
4Now locate the tab on
the bottom of the battery.
5 Insert the tab into the
hole at the bottom of the
battery chamber.
6 Press the top of the battery
into place.
11
Getting Started
Step 2: Attach the Back CoverStep 3: Charge the Battery
1 Locate the
notches along
each side of the
back of
the phone.
2Using the
notches as a
guide, place the
back cover so
that it rests as
shown in the
diagram.
3 Slide the back
r
cover upward
o
f
until it clicks in
t
o
Note! Never use your phone with the front or back
cover removed. For more information on
changing covers, see “Changing Front Covers”
on page 15.
12Some menus/features are operator dependent.
N
place.
m
o
c
For detailed information on safely handling your battery,
see “Battery Use and Care” on page 5.
e
s
u
l
a
i
c
r
me
*
* It may take up to 30 minutes for a new or fully
discharged battery to indicate charging. It takes about
4 hours to fully charge a battery for the first time.
For optimal performance, do not allow your battery
to completely discharge.
*
Getting Started
Knowing When to Charge
• The battery meter icon () on the standby
screen will begin to empty.
Battery Low will appear in the display and you will
•
hear a short beep.
Charging Indicators
To indicate charging, Charging Only will briefly appear
when the phone is powered off and
appear when the phone is powered on. Additionally, the
battery meter icon () will fill and alternate with the
charging symbol () until the phone is completely
charged. Once completely charged, the icon will appear
full ().
Note!
The amount of battery power indicated by your
battery icon is an estimate that may vary
depending on your charging and use patterns. To
ensure adequate power supply, keep your battery
fully charged.
Some menus/features are operator dependent.
N
Charging will briefly
o
f
t
o
r
o
c
Removing Your Charger
Lift the connector upwards and pull it
out.
u
s
e
Turning Your Phone On and Off
c
l
a
i
Turn your phone On by pressing and holding the power
key () until your phone turns on. The phone will
r
beep unless silent mode is activated. Turn your phone
e
Off by pressing and holding the power key until your
m
phone turns off.
m
Making and Receiving Calls
Making Calls
1 Press the numeric keys to enter the phone number
you want to call. The number is shown in the display.
Note!
You can press C to erase one or more digits in
the display, or press and hold
C to erase all digits.
13
Getting Started
Call. The number you are dialing, along with
2 Press
Calling and then Connecting, is shown in the
display while your phone accesses the wireless
network.
3 When the call is connected, a call timer is shown
in your display. The phone number that you dialed
will remain on your screen. The person’s name will
appear if entered in your phonebook.
4 To end the call, press
Making Emergency Calls
Enter the local emergency number, press Call.
If your keypad is locked and you attempt to make
an emergency call, the phone will recognize it as an
emergency number and will temporarily disable keypad
lock and phonelock.
Making International Calls
1 Press and hold the 0 key until a + sign appears.
The
+ sign replaces the international access number
of the country from which you are calling.
2 Enter the country code, area code (without the
leading zero) and phone number.
14Some menus/features are operator dependent.
N
End.
o
o
c
r
o
f
t
Receiving Calls
When you receive a call, the ringer sounds, Incoming
Call
backlight illuminate. If you have Caller ID, the caller’s
phone number is shown in the display. The caller’s name
will also appear if the phone number is found in your
phonebook. The voice tag will also be played if you have
one recorded for that caller.
Press
me
Note!
m
Changing the Earpiece Volume
During a call, you can change the earpiece volume
by pressing either side volume key.
Call.
3 Press
appears in the display, and the display and keypad
e
s
u
l
a
i
c
r
Answer
to answer the call.
In some instances, Caller ID may send the caller’s
name even if the name/number is not in your
phonebook. Caller ID could also block the
caller’s name or number from appearing.
• Press upper side key to increase the volume.
• Press lower side key to decrease the volume.
Getting Started
Muting the Microphone
During a call, you can turn off the microphone.
• Press and hold
in the display.
• Press and hold
Changing Front Covers
Removing Your Phone’s Covers
Your phone is equipped with replaceable covers. For
more information on ordering additional covers, see
“Accessories, Accessibility, and Internet” on page 70.
C until Microphone Muted appears
C again to resume the conversation.
r
o
f
t
o
N
Some menus/features are operator dependent.
c
o
Never use your phone with the front or back cover
removed.
1 Remove the back cover. Use one
hand to press down on the back
cover latch and the other hand to
slide the cover off the phone.
l
a
i
c
2 Locate the latches at the bottom of
r
e
your phone.
m
m
3 Press down on the latches while
lifting the front cover away from the
phone (remove from the bottom).
4 Remove the keypad from the cover.
u
s
e
15
Getting Started
Replacing Your Phone’s Covers
1 Locate the four notches on the front
cover.
2 Holding the front cover horizontally
(flat), place the keypad in the cover.
3 Push down on each of the notches to
secure the keypad in the cover.
Note! Once properly installed, the
keypad will remain in the
cover if you turn the cover
over.
4 Locate the tab on the top of the
cover.
5 Holding the front cover at an angle,
as shown in the illustration, insert the
tab into the notch on the phone.
6 Snap the bottom of the cover into
place.
7 To replace the back cover, see “Step
2: Attach the Back Cover” on page
12.
16Some menus/features are operator dependent.
o
N
r
o
f
t
m
o
c
r
me
c
l
a
i
u
s
e
Using Menus
Using Menus
This chapter will provide an overview of the entire menu
structure. The features are described in more detail in
subsequent chapters.
The main menu has seven icons that display the top-level
menus. The corresponding title of the selected menu is
displayed below the menu tabs when highlighted. Each
menu is represented by an icon. A menu diagram is
located on the inside front cover of this user’s guide.
The following menus will appear in your phone:
1
Phonebook
Messages
2
3
Call Info
4
Settings
Extras
5
Browser
6
7
My Shortcuts
o
o
f
t
r
o
c
N
Note!
The Browser menu is operator dependent and
may not be available in your phone.
Some menus/features are operator dependent.
m
m
Note!
For quick access to a menu or submenu once in
the menu structure, press the number next to the
menu or submenu name.
Joystick/Center Push
l
• Use the joystick to navigate through the menu system.
a
• Press down on the center ( ) to select a menu,
i
submenu, or setting.
c
r
e
Left Softkey
• Press to select the menu, item, function, or setting.
Pressing down on the center of the joystick will
typically perform the same function as the left softkey.
Right Softkey
• Pre ss to c ancel your a ction or to g o back one le vel in the
menu system.
• Press and hold to return to the standby screen.
u
s
e
17
Using Menus
Menu Help
To help you use the menus and
functions, your phone has pop-up help
texts that explain the menus. These
help texts are set to On when you buy
your phone, but you can turn them off
at any time.
Note!
Press any key to clear the Menu Help from
the screen.
Turning Off Menu Help
1 Scroll to Settings, Select, Display, Select,
Menu Help, Select.
2 Select
Options from Standby
You can press the options key ( ) from the standby
screen to see a list of options. Some of the options (noted
with asterisks below) can only be selected after entering a
phone number.
• Turn On Silent
• Lock Keypad
• Turn on TTY
18Some menus/features are operator dependent.
Off, Select.
N
o
r
o
f
t
m
o
c
• Edit Before Call *
• Insert Stop*
• Insert Pause *
•Status Info
•Help
Note!
You can also quickly enter a menu to Tu rn
On/Off Silent
pressing, and holding,
l
a
screen.
i
c
r
Phonebook Menu
e
s
or Lock/Unlock Keypad by
u
C from the standby
me
For more information on using the phonebook,
see “Using the Phonebook Menu” on page 34.
Call Contact
The Call Contact submenu displays phonebook entries
in alphabetical order by first name or last name
depending on the
19.
Sort Order. See “Sort Order” on page
Using Menus
Add Contact
The Add Contact submenu allows you to create a new
phonebook entry. A phonebook entry is called a contact.
A contact can have as many as six associated numbers
(home, work, fax, etc.). You can save as many as 500
numbers in your phonebook.
Edit Contact
The Edit Contact submenu allows you to delete contacts
or edit contact names, numbers, positions, voice tags,
and default numbers.
My Numbers
This submenu displays your phone number or phone
numbers (if your subscription includes two numbers).
Groups
This submenu displays a list of all groups. Use this
submenu to manage or add groups. For more
information on using groups, see “Groups” on page 37.
Calling Cards
The Calling Cards submenu allows you to store up to
three calling card numbers and access numbers. For more
Some menus/features are operator dependent.
N
o
o
f
t
r
o
c
m
information on Calling Cards, see “Using Calling Cards”
on page 37.
Options
The following options are available in the
Phonebook
Edit Positions
Edit Positions shows your phonebook numbers and
which position they occupy in the list of numbers.
Use this list to change the position number for a
particular phone number.
e
m
Note!
Sort Order
Determine how contacts will appear in your phonebook.
Options include
Long Press
Determine the action of a long press of a key from
the standby screen. Options include
menu.
l
a
i
c
r
Use the contact position number to Speed Dial
(positions 2-99) or SuperSpd Dial (positions 2-
9) your number entries.
e
s
u
By Last Name or By First Name.
SuperSpd Dial,
19
Using Menus
Phb. Shortcut, and Off. SuperSpd Dial allows you to
call contacts in positions 2-9 by pressing and briefly
holding, their position number.
you to quickly access phonebook entries by pressing
the key that corresponds with the contact’s name.
Ask to Save
Select if you want to be prompted to save names and
numbers in your phonebook when the phone does not
recognize the number of the most recent call.
Delete All
Use this submenu to delete all phonebook entries.
Memory Status
This submenu tells you how many positions you have
used in numbers, email addresses, and voice tags.
Messages Menu
For details on sending and receiving messages,
see “Using the Messages Menu” on page 41.
20Some menus/features are operator dependent.
N
Phb. Shortcut allows
o
f
t
o
r
o
c
Voi ce ma il
SMS
me
Email
m
Browser Alerts
The Voicemail submenu allows you to enter and access
your voicemail access number if you have voicemail
service from your service provider.
e
The SMS (Short Message Service) submenu contains the
following submenus:
on sending and receiving text messages, see “Using the
Messages Menu” on page 41.
The Email submenu allows you to use your phone to
access an email account from another device (such as
your PC). Submenus include
Compose, Outbox, Drafts, Archive, and Options.
The Browser Alerts submenu lets you know when you
have received a new alert in your inbox (such as stock
quotes). Submenus include
Deletion
a
i
, and Options. For more information
c
r
.
s
u
Inbox, Send New, Send a Page,
l
Send & Receive, Inbox,
Browser Inbox and Alert
Using Menus
Options
Voicemail No.
Use this submenu to set your voicemail access number
(provided by your service provider).
You may need to enter stops and pauses when adding a
voicemail access password. A stop will cause the phone
to stop transmitting numbers until you press the left
softkey. Press and hold
A pause will temporarily suspend transmitting numbers for
approximately two seconds before sending the next series.
Press and hold
the display.
Msg. Signature
Use the Msg. Signature submenu to attach a signature
to your email, Chat, or SMS messages. Options include
Include Sig. and Signature Text.
Call Info Menu
The Call Info menu allows you to view information and
establish dialing and answering preferences for your
Some menus/features are operator dependent.
# to enter the stop character ( ).
* until the pause character ( ) appears in
o
c
r
o
f
t
o
N
phone (some selections available in this menu are
dependent on your service provider). It also enables you
to view and edit system options and call statistics. When
you are engaged in a call, the menu name will change to
Ongoing Call.
Missed Calls
Press Select from the Missed Calls submenu to view
missed calls. The phone number will alternate with the
date or time of the missed call.
Highlight a missed call and press to see the following
r
Missed Calls options: Edit before Call, CC Call (credit
e
card call),
m
m
Call List
The Call List contains a list of outgoing, incoming,
and missed calls. You can quickly access the
the standby screen, by pressing
?
l
a
i
c
Add Number (to phonebook), and Delete.
Missed Call
u
s
e
Call List.
Call List, from
21
Using Menus
Answered Call
Outgoing Call
Call Timers
Use this submenu to check the duration of your Last
, Total Calls, Outgoing Time, and Incoming Time;
Call
to view the
to turn
Clear Call List
Use Clear Call List to delete the entire call log.
Ongoing Call Menu
The Ongoing Call menu replaces the Call Info menu
when you are engaged in a call. The following submenus
will appear:
Release Active, Retrieve Call, and Call Info.
22Some menus/features are operator dependent.
SMS Counter; to Clear thecall timers; and
Minute Minder on or off.
c
r
o
f
t
o
N
Turn Off Tones, Hold Call, Switch Calls,
o
Settings Menu
Sounds & Alerts
Ring Volume
The Ring Volume submenu allows you to set the level of
the ring volume. The volumes range from 0 (off) to 5
(high). You can scroll through the list using the joystick
or you can silently scroll through the list using the side
volume keys. Then press
selection.
me
m
Phone Silent
Completely silence your phone. Options include On and
Off. The Silent Mode icon ( ) will indicate when Phone
Silent is set.
Note!
e
s
u
l
a
i
c
r
You can quickly activate or deactivate silent mode
from the standby screen by pressing and holding
C.
Select to confirm your
Using Menus
Increasing Ring
When you select Increasing Ring, the ring volume will
continue to increase until it has reached the maximum
volume or you answer or reject the call. Options are
and
Off.
Vibrating Alert
Your phone has a built-in vibrating alert so you can
receive calls or messages silently. Options are
(will vibrate when silent mode is on), and Off.
Silent
Ring Sounds
The Ring Sounds submenu allows you to choose the
type of sound or melody for the ringer for
Fax Calls, Data Calls, and to create Personal Rings for
specific callers. Each sound or melody is demonstrated
as you scroll through the selections. There are
multiple ring sounds, several of which you can create
yourself. You can silently scroll through the list using the
side volume keys.
Alarm Sound
You can select different types of melodies or signals to
hear when your alarm sounds.
Some menus/features are operator dependent.
N
o
f
t
o
r
On, On if
Voice Calls,
o
c
On
m
Message Alert
Choose which type of sound you will hear when you
receive an incoming SMS or voicemail message. The
options are
My Melodies
Melody Exchange
Your phone comes with multiple melodies. You can edit
the melodies and you can send them to a friend via SMS.
1 Select the melody.
2 Select
e
m
Ton e, Click, or Silent.
e
s
u
l
a
i
c
r
Edit or Send (via SMS). Follow these
instructions to edit.
• Use the keypad to enter musical notes.
• A long press of the key will cycle through the
four different lengths of the corresponding
note.
• Press
0 to change octave.
# once to raise the note one semitone.
• Press
• Press
# twice to lower the note one semitone.
C to remove notes.
• Press
• To listen to your melody, press the left softkey.
23
Using Menus
• Press the left softkey again to save and name it,
or press the right softkey to continue
composing.
Receiving Melodies via SMS
You can also receive melodies through SMS. The melody
will be attached to an SMS message and you will be
prompted to Play or Save the melody.
Note!
You can also download custom melodies using
your phone’s browser. See “Downloading
Melodies” on page 62.
Info Volume
Shows the current volume setting for system
notification beeps.
Key Sound
Choose which type of sound you will hear when you
press a key. The options are
provides a longer signal, more suitable for activities
such as telephone banking, while click provides a quick
burst signal.
24Some menus/features are operator dependent.
o
N
Ton e, Click, or Silent. Tone
r
o
f
t
m
o
c
Access Tone
You can set t h e Access Tone to beep when your call has
been connected. Options include
Minute Minder
Minute Minder notifies you when each minute passes
while you are engaged in a call. Settings are
Ear Volume
Use this submenu to change the ear (speaker) volume.
Profiles
me
Your phone includes a number of pre-programmed
profiles. A profile is a group of settings which suit a
certain environment. Some phone accessories select a
profile automatically. For example, when you place your
phone in a car handsfree unit, the
When you buy your phone, it is set to the
profile. If you select a profile other than
of the profile is shown on standby. A profile with no
accessories associated, such as
be chosen manually.
There are seven pre-programmed profiles:
• Normal (no icon appears)
r
c
a
i
s
u
l
On and Off.
e
Car profile is chosen.
Normal
Normal, the icon
Meeting or Normal, must
On and Off.
Using Menus
• Meeting
• Car
• Outdoors
• Porta ble
• Home
• Wo rk
Submenus include
Edit Profile
Select Profile
Use this submenu to select a profile.
View Profile
Select to view the current profile. The settings for the
profile appear.
Edit Profile
You cannot create more profiles, but you can edit the
settings for the current profile. Use the
function to see what settings are included a certain
profile.
Some menus/features are operator dependent.
Select Profile, View Profile,
, and Reset Profiles.
t
o
N
o
f
c
r
View Profile
o
Call Options
m
m
Reset Profile
Use this submenu to reset the profile settings to the
default settings.
u
s
e
Missed
Activate and
Accept Calls
Accept calls allows you to reject certain incoming calls.
When activated, only the callers specified will be able
to reach you. The other calls will be sent to the
list or Voicemail and you will not hear a ring tone.
Calls
r
e
The choices for
Accepted List.
Forward Calls
If you cannot answer an incoming voice, fax, or data call,
you can forward it to another number. The options for
Forward calls are Activate, Deactivate, and Setup.
Note!
Once you have entered those codes, select
then enter the number to which you want your calls
l
a
i
c
Accept Calls are Accept Options and
To activate Forward Calls, you will need
separate codes from your service provider.
25
Using Menus
forwarded. Your phone will send the necessary
information to your service provider to set up the call
forward.
Restrict Calls
Restrict Calls service allows you to restrict certain types
of calls, such as calling cards, non-phonebook numbers,
or roaming calls, from being made and received. You also
have the option of personalizing the call restrict
submenus using
enter specific numbers that you want restricted. For
instance, you can enter 800 and restrict all calls
beginning with 800. For this option, the phone only
checks the beginning of the number sequence, so a
number, such as 1238001 would not be restricted.
Submenus for
and
Incoming Calls.
If you forward incoming calls, you cannot activate some
Restrict Calls options. Likewise, if you restrict calls, you
cannot activate some
prompted to enter your Phonelock code to use
this feature.
Note!
26Some menus/features are operator dependent.
My Choice. My Choice allows you to
Restrict Calls include Outgoing Calls
o
f
t
o
Forward Calls options. You will be
N
Restrict Calls
call is made.
is disabled when an emergency
r
m
o
c
Call Waiting
If you want to be able to receive a second call while
another call is in progress, you must turn on the
service. Options include Activate, Deactivate,
Waiting
and
Setup.
u
s
e
Auto Area
To activate
from your service provider. Once you enter those codes,
select
Note!
me
Auto Area Code
The Auto Area Code submenu allows you to store an
area code that will automatically be added to the 7-digit
number you have dialed. The options for
Code
prompted to indicate which area code to use.
Auto Prefix
The Auto P ref ix submenu allows you to store a 1- to 12digit prefix. For instance, you can store the prefix to your
office. When you dial a 4- or 5-digit phone number, the
Call Waiting, you will need separate codes
Activate or Deactivate.
l
a
i
If you are engaged in a data call, all other
c
r
incoming calls are rejected.
are On and Off. When you select On, you will be
Call
Using Menus
auto prefix is automatically added at the beginning of
the number.
The options for auto prefix are
prefix is not added for phone numbers longer than
five digits.
Answering Mode
The Answering Mode submenu allows you to specify
how you want to answer calls. The three options are
Normal, Any Key, and Auto. Selecting Normal indicates
that pressing the left softkey will answer a call.
indicates that you can answer the call by pressing any key
except the right softkey.
be answered automatically if connected to an accessory.
Networks
This submenu allows you to view and modify network
settings.
Note!
It is typically not necessary to make network
changes. You should contact your service
provider before making any network changes.
Some menus/features are operator dependent.
On and Off. The auto
Any Key
Auto indicates that the call will
o
c
r
o
f
t
o
N
m
•
Standard/Automatic - The phone will attempt to
use the digital network first. If not available, it will
switch to analog. If neither the digital nor analog
home systems are available, the phone will select
the digital non-home system, or the analog nonhome system.
Home Only - The phone will stay on the home
•
system.
Analog Only - The phone will operate only in
•
analog mode.
r
•
Automatic-A - The phone will automatically select
e
m
Automatic-A if the system identification is odd.
•
Automatic-B - The phone will automatically select
Automatic-B if the system identification is even.
Note!
Display
Light
Use the Light submenu to set the display and keypad
backlighting to stay
l
a
i
c
The list of available networks will var y depending
on your service provider.
e
s
u
On (always on), Off (never on),
27
Using Menus
Automatic (lights up for 15 seconds when a call is
or
received or a key is pressed).
Text Size
Select the size of the font to appear in your display.
The options include
Medium (four lines of text), and Large (three lines of
text).
User Greeting
Use the UserGreeting menu to alter the information
that is displayed when your phone powers up and down.
Options include:
Animation
whatever message you would like to see (up to one line of
text) when you phone powers on or off. You can also
choose to use a movie for the greeting. The default
greeting is a Sony Ericsson movie.
Display Sleep
Use Display Sleep to save battery power. The text on
the standby screen is reduced to two rows in the middle
of the display a few minutes after you have pressed a key.
28Some menus/features are operator dependent.
, and Off. With My Greeting, you can enter
Small (five lines of text of text),
Sony Ericsson, My Greeting, My
o
c
r
o
f
t
o
N
m
Background
You can select an image to display on the background
of your standby screen.
My Banner
u
s
e
Use the My Banner submenu to enter text that will
appear on your standby screen. The banner may be
personalized; however, it can be overwritten by network
information.
r
Contrast
Lightens or darkens your screen’s brightness.
me
Menu Help
Tu r n Menu Help On or Off. For more information on
Menu Help, see “Menu Help” on page 18.
Language
The Language submenu allows you to select your
Menu Language and Input Language.
Menu Language is the language that appears in
The
the phone display. The languages vary between markets.
Your mobile phone may support American English,
c
l
a
i
Using Menus
Canadian French, Latin American Spanish, and Brazilian
Portuguese.
Input Language is the language used to create
phonebook entries, SMS messages, and email. Options
include the languages that are available on your phone,
This submenu contains the Time Format (24 Hour
or am/pm),
(On/Off ), and Auto Time Zone (No Update and Auto
Update).
Auto Time Zone will recognize if you change networks
and the time sent out from the operator deviates from
the time in your phone. When
the network will update the time, time zone, and
daylight savings automatically.
Some menus/features are operator dependent.
Time Zone (GMT±) , DaylightSavings
o
f
t
o
N
Auto U pda te is activated,
r
o
c
m
Set Date
Use this submenu to set the date.
Date Format
Use this submenu to choose how the date will appear
on your screen.
Locks
The Locks submenu contains Phonelock and Auto
Keylock
r
Phonelock prohibits the phone from making calls except
e
emergency calls. To set phone lock, you will be prompted
m
to enter a security code. Options are
Change Code.
Auto Keylock (keypad lock) allows you to prohibit your
phone from keypad presses.
30 seconds of inactivity from the standby screen. The
two options for
keypad remains locked until you remove and replace the
battery or receive a call (after the call is completed, the
keypad is returned to the locked state).
l
a
i
options.
c
Auto Keylock are On and Off. The
e
s
u
Set Phonelock and
Auto Keylock activates after
29
Using Menus
The keypad lock feature allows emergency number access
even if the keypad is locked.
Note!
You can quickly turn on keypad lock ( ) from
the standby screen by pressing and holding
Voice C o ntrol
For detailed instructions on using Voice Control, see
“Using Voice Control” on page 46. The
submenu contains Voi ce Comm an ds, Voice Answer,
Magic Word
Vo ic e Pr om p ts .
DataFaxModem
Submenus include Data/Fax and Modem Speed. For
more information on data settings, see the “Advanced
Feat ures Insert”.
TTY Mode
The accessory setting submenus include Turn On TTY
and Tur n Of f TT Y.
30Some menus/features are operator dependent.
, Caller Name, Number Echo, and
t
o
N
o
f
Voice Control
o
c
r
Service Info
C.
Reset Settings
Extras Menu
Voic e M emo
me
m
Calendar
Provides service information about your phone’s
hardware and software.
Select this submenu to reset all settings to default.
You will be required to enter your Phonelock code.
l
a
i
c
r
This submenu allows you to record a short voice memo.
Submenus include
, and Set View.
Voi ce
Your calendar can store many events and tasks. For more
information, see “Using the Calendar” on page 57.
e
s
u
Record, Memo List, Erase All
Using Menus
Time
Alarm Clock
The phone has an Alarm which rings at the time set,
even if the phone is turned off. The alarm rings for
60 seconds and is repeated every nine minutes for
60 minutes if you do not turn it off. You also have the
option to use
to go off at the same scheduled time each day.
Tu r ni ng t he A la r m O ff
1 Press any key to turn the alarm off when it rings,
2 If you do not want the alarm to be repeated,
Canceling the Alarm
1 Scroll to Extras, Select, Time, Select, Alarm
2 Choose
Time and Date
This submenu is identical to Time and Date found in
the Settings menu. For more information, see “Time and
Date” on page 29. Submenus include
Some menus/features are operator dependent.
RecurrentAlarm which sets the alarm
Ye s to turn off or No to snooze for 10 minutes.
press
press
Select.
r
o
o
f
t
, Select.
Clock
Alarm, Select, Cancel, Select.
N
Local Time,
c
o
m
Time Settings, Set Date, and Date Format. The time is
always displayed on the standby screen.
Timer
The phone has a built-in 24-hour timer. You set the time
you want and when that time is up, the phone beeps.
1 Enter the time and press
clock will appear on the standby screen to indicate
that the timer is set.
2 When the alert sounds, press any key to turn it off.
r
Stopwatch
e
m
The phone has a built-in stopwatch.
• Press
• Press
• Press
mode).
• Press
four laps.
l
a
i
c
Start to start the stopwatch.
Pause to pause it.
Reset to reset the stopwatch (if in pause
Lap to start the lap timer. You can time up to
u
e
OK to start the timer. A
s
31
Using Menus
Games
Your phone has several games. Use the joystick to move
up, down, left or right and to select an item, or use the
keys as follows:
2 = up5 = select/deselect
4 = left6 = right
C = pause8 = down
Note!
Prolonged use of games can deplete battery
power more quickly than under normal use.
Calculator
r
o
c
The phone has a built-in calculator, which
can add, subtract, multiply, divide, and
calculate percentages.
• Press the digit keys to enter the
numbers you want to calculate.
• Tilt the joystick right or left to highlight an
operation (+, -, x, etc.).
• Press the left softkey to perform the operation.
• Press the right softkey to cancel the operation.
32Some menus/features are operator dependent.
o
N
o
f
t
Code Memo
The submenu allows you to store passwords and codes
in a password-protected location.
Accessories
The Accessories submenu allows you to work with
the accessories currently connected to your phone.
Browser
For more information on WAP, see “Browser” on
me
m
page 61.
Launch Browser
Use the Launch Browser submenu to start your
browsing session.
Note!
e
s
u
l
a
i
c
r
If this submenu is greyed out, you will not be
able to browse. Contact your service provider for
subscription information.
Browser Help
The Browser Help submenu gives you hints about using
your browser. Browser help screens will scroll across your
display. Press
Active Gateway
The Active Gateways submenu allows you to choose
between two gateways.
Note!
My Shortcuts
A quicker way to move through the menus is to use
the
My Shortcuts menu. When you buy your phone,
My Shortcuts contains a few menus/settings which
you can remove from
setting from another menu to
you can reach the settings you use most, quickly and
easily. The default submenus for
Ring Volume, My Numbers, Alarm Clock, and Edit
Shortcuts
No to return to the Browser menu.
If this submenu is greyed out, your service
provider has already set the active gateway.
c
r
o
f
t
My Shortcuts. You can also add a
o
My Shortcuts. In this way,
N
My Shortcuts include:
.
o
m
Using Menus
Edit Shortcuts to add more shortcuts to your list.
Use
Use the center of the joystick to check (select) or uncheck
(deselect) items that you want to appear in your shortcuts
list. When you check an item, you will be prompted for
a position number.
Note!
Tilt and hold the joystick, from the standby
screen, to the left to quickly see the first shortcut
My Shortcuts.
in
l
a
i
c
r
e
u
s
e
m
Some menus/features are operator dependent.
33
Using the Phonebook Menu
Using the Phonebook Menu
You can create your personal phonebook by saving
information about your friends, family, and colleagues as
a contact. Within a contact, you can save details such as
name, title, phone numbers, and email address – all in
one place. You can store up to 500 numbers (depending
on size of contact information).
You can also synchronize your contact list with your PC.
See “Synchronizing Your Phone and PC” on page 39.
Adding Contacts
For each contact, you can fill in the following
information: first name, last name, title, company, home
phone number, work phone number, mobile phone
number, fax number, other phone number, and email
address. The contacts are saved in the phone. Each phone
number saved occupies one position in the memory. You
can save around 500 positions in the phone. Contacts 199 can be speed dialed and contacts 1-9 can be super
speed dialed. Position 1 is always reserved voicemail
access. See “Speed Dial” on page 36.
34Some menus/features are operator dependent.
o
N
r
o
f
t
m
o
c
1 Scroll to
2 Press
3 Press
4 When you have filled in the information you want,
r
e
5 If Voice Dialing is on, you are asked if you want
m
6 Follow the prompts to store your contact.
Note!
Touch Tone Service
You can save a phone number together with tone signals
and codes in your phonebook. When you call this entry,
the phone number and all the tone signal codes are then
Phonebook,
Edit
and enter a first name. Press OK.
Edit
and enter a last name. Press OK.
u
l
a
i
scroll, by tilting the joystick down, to
c
Exit
,
Proceed
to save a voice command for the contact. For more
information on voice dialing, see “Using Voice
Control” on page 46.
At any time, you can press
the contact.
Select
, Add Contact,
e
s
.
Save and
Exit
to save and exit
Select
.
Using the Phonebook Menu
dialed automatically. This could be useful, for example,
when accessing an answering machine or when using
telephone banking services. Follow the same procedure
as adding a contact, but use stops and pauses between
numbers or access codes.
A stop will cause the phone to stop transmitting numbers
until you press the left softkey. Press a nd hold
stop character ( ).
A pause will temporarily suspend transmitting numbers for
approximately two seconds before sending the next series.
Press and hold
the display.
Note!
Calling Contacts
1 Scroll to Phonebook,
2 Highlight the name of the contact you want to call,
Some menus/features are operator dependent.
* until the pause character ( ) appears in
Saving personal codes in the phonebook involves
a risk if your phone is stolen. It is safer to save
personal codes in the Code memo. See “Code
Memo” on page 32.
o
t
N
Select
Select.
# to enter the
c
r
o
f
, Call Contact,
o
m
Select
Call
3 Press
Note!
r
e
m
Contact Icons
An icon will appear next to any number stored for
a contact. These icons should help you identify each
number.
.
to call the name that appears or scroll
through the list of numbers. If you have stored
multiple numbers for that contact, the list of
numbers will appear for you to choose which
number to call. To edit which number is
highlighted first (the default number), see “Editing
and Deleting Contacts” on page 36.
l
a
i
You can quickly access your contact list from the
c
standby screen by tilting and holding the joystick
to the right.
Home number
Wor k num b er
Mobile phone number
Fax number
u
s
e
35
Using the Phonebook Menu
Other number
Email address
Sort Order
You can find the contacts in your phonebook by
searching for either first or last name, depending on
which sort order you have set.
1 Scroll to
2 Select a sort order,
Speed Dial
The Speed Dial feature is always active on your phone.
This feature allows you to call numbers in position
numbers 2-99 by simply pressing the position number
and then pressing
Note!
SuperSpd Dial
The SuperSpd Dial submenu allows you to call numbers
in position numbers 2-9 by simply pressing and holding
the position number from the standby screen.
36Some menus/features are operator dependent.
Phonebook,
Order
,
Select
Call
Position 1 is always reserved for voicemail.
Select
Select
o
, Options,
.
f
t
o
.
from the standby screen.
N
r
Select
c
o
, Sort
m
You must activate
submenu before using
submenu is set to another option, SuperSpd Dial
Press
will not work. See “Long Press” on page 19.
Note!
Position 1 is always reserved for voicemail and
can be accessed with a long press of the
regardless of the long press setting.
c
Editing and Deleting Contacts
r
e
m
Use the Edit Contact function to delete contacts or edit
a contact’s name, number, position, voice tag, or default
number (the number that appears first for a contact with
multiple numbers).
1 Scroll to
2 Select the contact you want to edit or scroll to the
bottom of the list to delete that contact.
3 Select the item (name, number, etc.) you want to
edit.
4 Press Edit.
5 Enter your changes,
SuperSpd Dial under the Long Press
SuperSpd Dial. If the Long
e
s
u
l
a
i
Phonebook,
OK
Select
.
, Edit Contact,
1 key
Select
.
Using the Phonebook Menu
6 When you are finished, press
changes.
Note!
At any time, you can press the right softkey to
save and exit the contact.
Groups
You can create groups of numbers so you can send a text
message to several recipients at the same time. You can
have as many as 10 groups with up to 15 participants in
each group.
Creating New Groups
1 Scroll to Phonebook,
2 Choose
3 Enter a name for the group,
4 Scroll to
5 Highlight the name of the contact you want to add,
6 Highlight the contact’s number that you want to
Some menus/features are operator dependent.
Select
add,
Add Group,
Add Member,
.
Select
.
N
Select
o
Select
t
Add
Exit
o
, Groups,
f
.
OK
.
.
to save the
o
c
r
Select
7 Select
exit.
Editing Groups
Once you have set up a group, you can add members,
delete members, change the group name, or delete the
entire group.
Scroll to
Phonebook,
i
group you want to change. Choose from:
c
r
•
Edit - to add or delete members
e
•
m
m
.
Edit GroupName - to rename the group
•
Delete Group - to delete the entire group
Using Calling Cards
The Calling Cards submenu allows you to store calling
card numbers. The two options for the
submenu are
enter the
your phonelock code (default is 0000).
Card Setup
You can save three calling card numbers in your phone.
Add Member
l
a
Card Setup and Set CallingCards. To
Calling Cards submenu, you will need to enter
to add more members or
e
s
u
Select
, Groups,
Back
Select
, select the
Calling Cards
to
37
Using the Phonebook Menu
1 Scroll to Phonebook,
2 Enter your phonelock code,
3 Scroll to Card Setup,
4 Enter the name of your calling card, OK.
5 Enter the access number of the calling card
server,
OK
6 Choose the dialing delay (the amount of time the
7 Select which you want to send first, the number
8 Follow the prompts, entering the verification
Set CallingCards
If you have saved more than one calling card, you must
choose which card you want to use before making a
calling card call.
1 Scroll to
2 Enter your phonelock code.
3 Scroll to Set CallingCards,
4 Choose the card that you want to use,
38Some menus/features are operator dependent.
.
phone waits before sending the tones),
that you want to call or the verification code,
number, next dialing delay, and dialed number
(order will vary depending on what you select in
Step 7).
Phonebook,
N
Select
, Calling Cards,
Select
, Add New,
t
o
Select
, Calling Cards,
OK
.
o
f
Select.
r
Select
c
Select
Select.
o
Select.
.
Select.
m
Select.
.
Making a Calling Card Call
1 Enter or recall the phone number you want to call.
2 Press and hold the left softkey. If a card is already
selected, the phone will quickly display the calling
card number and then begin making the call.
If None is selected,
3 Press
Ye s
to select a calling card.
4 Enter your phonelock code.
5 Select
r
6 Choose a calling card.
e
7 Release the key after the number has been
m
Note!
Editing or Deleting Calling Cards
Scroll to Phonebook,
enter your Phonelock code,
l
a
i
Set CallingCards.
c
displayed.
If you are using stops between numbers, you
must press the left softkey
sequence of numbers. If you use pauses, the
numbers are sent automatically after the specified
length of time chosen for the dialing delay.
e
s
Select Card? will appear.
u
Select
, Calling Cards,
Select
to send the next
, Card Setup, select
Select
,
Using the Phonebook Menu
the card you want to edit or delete, choose Edit or
Delete.
Phonebook Memory Status
With the Memory status function in your phonebook,
you can check how many positions you have occupied
in your memory for numbers, voice tags, and email
addresses.
1 Scroll to
2 Use the joystick to scroll through the list.
Synchronizing Your Phone and PC
You can synchronize your phonebook contacts,
calendar, and tasks between your mobile phone
and popular Microsoft® Windows™-based PIM
(Personal Information Management) applications
using XTNDConnect PC software.
Some menus/features are operator dependent.
Select
Phonebook,
.
N
Select
, Memory Status,
f
t
o
o
r
m
o
c
To use your Sony Ericsson branded mobile phone with
the XTNDConnect PC program, you will need the
following:
• A functional serial port (COM port) or a functional
USB port on your computer
• Microsoft Windows 98/98 SE/ME/NT4/2000
• A Sony Ericsson or Ericsson branded serial interface
r
e
• Mobile Phone Monitor (a software interface
m
• XTNDConnect PC
Getting Started
1 Visit the Mobile Internet
l
a
cable (RS232 Cable DRS-11) or a Sony Ericsson or
i
Ericsson branded USB cable intended for use with
c
this product
between your mobile phone and the
XTNDConnect PC software)
(www.SonyEricsson.com/mobileinternet
detailed instructions and to download
XTNDConnect PC and Ericsson Mobile Phone
Monitor. You do not need the cable or your mobile
phone available to download the software.
u
s
e
) for
39
Using the Phonebook Menu
2 Choose T61 from the Sony Ericsson Software list.
Note!
To learn more about XTNDConnect PC, visit
http://www.extendedsystems.com/go/ericsson
e
s
u
l
a
i
c
r
e
m
m
o
c
r
o
f
t
o
N
40Some menus/features are operator dependent.
Using the Messages Menu
Using the Messages Menu
You can check your voicemail, check and send email,
send and receive text messages, and receive browser alerts
from within the
Voicemail
You can call your voicemail access number from the
Voicemail submenu. Use the Options submenu to enter
or change your voicemail access number.
Sending Text (SMS) Messages
Note!
You can use either the keypad or the Chatboard accessory
to enter the message you want to send. You can enter up
Some menus/features are operator dependent.
Messages menu.
o
c
r
o
f
t
You cannot send SMS messages in analog mode.
If you attempt to send a message, the message
will go to
the message once the phone is in digital mode.
o
N
Unsent Box. You will need to resend
to 160 characters per message or the maximum length set
by your service provider.
1 Scroll to
2 Enter the recipient’s number or tilt and hold the
r
e
3 Enter your message,
m
m
4 Press
Sending SMS to Multiple Destinations
Multiple Destination SMS gives you the functionality of
sending SMS messages to up to 10 email addresses,
mobile phone numbers, or combinations of both.
Messages,
Send New,
l
a
i
joystick to the left to retrieve the number from the
c
phonebook or the group.
Select
If you press
message will be saved to your
you can send it later.
Sending msg appears in the display followed by
SMS has been sent.
e
s
Select
u
Select
.
OK
to send the message.
Cancel
or if the message fails, the
, SMS,
Select
.
Unsent Mail box so
,
41
Using the Messages Menu
1 Scroll to Messages,
Select
New,
2 To enter email addresses, use
Method. To enter phone numbers, use
Method. To change the input method, press
and choose
3 You must separate your entries with a comma.
(9195551212, john.doe@email.com).
Note!
In digit mode, press and hold 1 to enter a
comma. In multitap mode, multitap
comma or the @ symbol.
Sending Unsent Mail
1 Scroll to Messages,
Unsent Box,
2 Highlight the message.
3 Press to
times
for more options (Send, Delete, or Read
Next).
42Some menus/features are operator dependent.
Select
, SMS,
.
Input Method.
Select
.
Send or Delete or press
N
Select
o
t
Multitap Input
, SMS,
o
f
Select
123... Input
1 to enter a
c
r
Select
Select
, Send
o
,
several
Message Options
Press when you are entering text to see additional
options. Options include
Language, Input Method, Edit Word, Accept Word,
Candidates, and Help.
Edit Word, Accept Word, and Candidates only appear
in T9 mode. For more information on these options and
text entry, see “Inputting Text” on page 54.
Receiving Messages
e
r
c
a
i
m
m
When you receive a message, the phone beeps (see
“Message Alert” on page 23) and the message
message Read now?
Reading Messages
1 Press the left softkey when you see the question
New message. Read now? to read immediately or
press the right softkey
Symbols, Caps Lock,
e
s
u
l
appears in the display.
New
to save the message to read
Using the Messages Menu
later. The message will be saved in Received Mail
in the SMS menu.
Note!
If you have received several messages, and you
Select
press
Inbox submenu. Select the message that you
want to read,
2 Scroll through the message by using the joystick.
An arrow in the bottom right-hand corner of the
display indicates that there is more text in the
message.
Note!
If the sender of the message wants you to reply,
the display shows
when you press the left softkey at the end of the
message. Press the left softkey
you do not want to reply, press the right softkey.
3 When you have read the text message, press
close the message or press
the following options:
Next
Some menus/features are operator dependent.
at the question above, you enter the
Select
.
o
f
t
r
again to reply. If
Delivery Receipt Reply?
o
N
Select
to choose one of
Reply, Delete, Chat, Read
, Lock, Forward Msg., and Call.
c
o
m
Back
Saving Objects from a Text Message
When the email address, phone number, or internet
address, is highlighted, press
• An email address or phone number is saved in the
Phonebook as a contact.
• An Internet address is saved in
the
c
Inbox Icons
r
e
These icons will appear next to messages in your Inbox:
m
SMS Templates
If you have one or more standard messages that you
often use, you can save these as templates in your phone.
to
You can save up to ten templates consisting of up to
50 characters each.
u
l
Browser menu options.
a
i
indicates an unread message.
indicates a locked message.
s
e
Select
. Then select,
Bookmarks under
Save
.
43
Using the Messages Menu
1 Scroll to Messages,
Temp lates,
templates,
2 Enter the text for the template you want to create.
3 If you created your own template,
for this msg?
template.
4 Enter the recipient’s number or tilt the joystick to
the left to retrieve the number from the phonebook
or the group.
5 Create your message by entering text into your new
template. Press
press cancel or if the message fails, the message will
be saved in your
it later.
followed by
Select
Sending msg. appears in the display
SMS Chat
SMS Chat works in the same way as Chat on the
Internet. You can initiate a Chat session or you may
be invited to participate in a Chat session.
44Some menus/features are operator dependent.
Select
, SMS,
Select
Select
, Add New? or select one of the
.
t
Use template
Select
r
o
f
to use that
c
will appear. Press
Send
to send the message. If you
Unsent Mail box so you can send
SMS has been sent.
o
N
,
o
Starting a Chat Session
1 Messages,
2 Enter the recipient’s phone number or tilt the
joystick left to select a contact.
3 Write your message,
Note!
The Chat icon () will appear on your standby
screen when you are in an active Chat session.
c
r
Receiving a Chat Session Invitation
e
When you receive a Chat session invitation, the phone
m
m
beeps and the message
appears.
• To read the Chat message, press
• To reply, press
• To suspend a Chat session, press No.
• To resume a Chat session, scroll to
Select
• To end a Chat session,scroll to
SMS,
a
i
, SMS,
Select
Select
, SMS,
Send
e
s
u
l
Chat Message, Chat Now?
Ye s
.
Select
, Chat,
, Chat,
Select
Select
, Chat,
Select
.
.
Ye s
.
Messages,
Select
, Resume.
Messages,
, End (phone number).
Select
,
Using the Messages Menu
• To reject a Chat message, press
Chat message is saved in
menu.
• If you receive a new Chat message while another
Chat session is ongoing, press
ongoing session and start the new one.
Add Nickname
You can add a nickname to your Chat messages (and
SMS messages). Scroll to
Options,
appear with every Chat message you send.
Select
Messages,
, Nickname, store a nickname that will
o
No
. The rejected
Inbox in the Messages
Ye s
to end the
Select
, SMS,
c
r
o
f
t
N
Some menus/features are operator dependent.
o
Select
m
,
m
e
r
c
e
s
u
l
a
i
45
Using Voice Control
Using Voice Control
Before you can start dialing by voice, you need to record
your voice commands (if you want your commands in a
language other than English).
Recording Voice Commands
Your phone comes with a pre-recorded list of voice
commands that match a wide variety of pronunciations.
The default commands are available only in American
English. You can record over (retrain) the current
commands to change the command or the language.
You always have the option to revert to the original
(default) English commands.
Note!
You must record voice tags for your phonebook
contacts to use Voice Activated Dialing.
The Command List is grouped by feature. You can
re-record all of the commands or just those for the
features you intend to use. Please note that some features
46Some menus/features are operator dependent.
o
N
r
o
f
t
m
o
c
are dependent on others. Your phone will notify you
if you are required to record additional commands.
Training Commands
There are three ways to train commands:
Training Single Commands
r
1 Scroll to Settings,
e
m
2 Choose a group of commands.
3 Select a word you want to train.
4 Choose
5 Follow the prompts to record over the command.
Training Command Groups
1 Scroll to Settings,
2 Scroll to the command group you want to train.
3 Press
l
a
i
c
Vo ic eC om ma n ds ,
Tra i n
Train Command
Vo ic eC om ma n ds ,
and choose Train Group.
e
s
u
Select
, Voice Control,
Select
.
(or press and choose
).
Select
, Voice Control,
Select
.
Select
Select
,
,
Using Voice Control
4 The phone will prompt you to train each word
within that group.
5 If the function associated with the command group
is dependent on another command, you will be
prompted to train those commands too.
Note!
You can exit group training at any time without
losing the commands you have just trained.
Training All Commands
1 Scroll to Settings,
VoiceCommands.
2 Press
and choose Tr a in A l l.
3 The phone will prompt you to train each word.
Listening to Current Commands
1 Scroll to Settings,
VoiceCommands,
2 Choose a group of commands.
3 As you scroll through the list, the commands will
be played back to you. If a command has not been
Some menus/features are operator dependent.
Select
, Voice Contro l, highlight
o
f
t
o
Select
, Voice Control,
N
Select
.
r
c
o
Select
recorded, the command will be spoken via a prerecorded voice.
Note!
If there is only one word for the selected
command group, press and choose
Command
Resetting Default Commands
There are three ways to reset commands:
r
e
Resetting Single Commands
m
m
,
1 Scroll to Settings,
2 Choose a group of commands.
3 Select the word you want to reset.
4 Press and choose
5 Confirm your selection.
Resetting Command Groups
1 Scroll to Settings,
2 Scroll to the command group you want to reset.
3 Press and choose
l
a
i
c
Voi ce Co mma nd s,
Voi ce Co mma nd s,
.
u
s
e
Select
, Voice Control,
Select
.
Reset Command.
Select
, Voice Control,
Select
.
Reset Group.
Play
Select
Select
,
,
47
Using Voice Control
4 Confirm your selection.
Resetting All Commands
1 Scroll to Settings,
VoiceCommands.
2 Press and choose
3 Confirm your selection.
Magic Word
You can use the Magic Word voice command to allow
totally handsfree access to voice control. Instead of
pressing and holding the side volume keys or the
handsfree button, you say the Magic Word and then one
of your recorded voice commands. The Magic Word is
especially suitable when driving a car with a car handsfree
kit installed, because you use external power instead of
the battery power of your phone. You can also use the
Magic Word when the phone is connected to a portable
handsfree (the standby time will be reduced). The default
Magic Word is “Wake Up”. You can keep this as the
Magic Word or record another. See “Training
Commands” on page 46.
48Some menus/features are operator dependent.
Select
, Voi ce Co ntro l, highlight
Reset All.
o
f
t
o
N
r
m
o
c
Note! Due to the nature of each individual’s speech
patterns and the process your phone uses to
generate or match a Magic Word, it is possible for
false matches to occur via other sources of speech
such as your car radio. This can result in
unintended call placement. To avoid this problem,
you may try using alternate Magic Words or
l
deactivate this feature.
a
i
c
Enabling/Disabling Magic Word
r
e
1 Scroll to Settings,
m
Magic Word,
2 Select the accessories you will use with the Magic
Wor d.
Note!
When On, the Magic Word icon ( ) will
appear in the display.
Note!
Save battery power by turning off the Magic
Word when you no longer need totally handsfree
access.
u
Add
s
.
e
Select
, Voice Control,
Select
,
Using Voice Control
Training a New Magic Word
1 Scroll to Settings,
VoiceCommands,
2 Select
3 Press
Note!
Adding Voice Tags to Your
Phonebook
When you create phonebook contacts, you will have
the opportunity to also record voice tags. You can add
voice tags later in the
Phonebook, Edit Contact.
1 Scroll to
2 Select
3 Select a contact,
4 Follow the instructions in the display. Keep the
Some menus/features are operator dependent.
Wake Up.
Tr a i n
You can train any word to be your Magic Word,
but the submenu name will always be
Settings,
VoiceCommands,
Add Voice Tag,
label unique, but also as brief as possible. Both
Select
, Voice Control,
Select
, Magic Word,
.
r
o
f
Select
Select
Select
o
Select
.
t
, Voice Control,
, Name Dialing,
.
Voi c e Con t ro l submenu or from
N
Select
c
Wake Up.
Select
o
Select
Select
“John” and “John Alexander Doe” can be recorded
,
.
m
m
,
.
fully.
Note!
An icon ( ) appears next to the contact names
which have a voice tag.
Voice Caller ID
You can choose whether you want to hear the recorded
voice command for a name when you receive an
r
incoming call.
e
1 Scroll to
2 Select
Voice Activated Dialing
Before using Voice Activated Dialing, you must add
voice tags to your phonebook contacts. The commands,
such as Call, are prerecorded in English, but you can
re-record these commands if you wish. See “Training
Commands” on page 46.
l
a
i
c
Settings,
Caller Name,
On or Off.
u
Select
s
e
Select
.
, Voice Control,
Select
,
49
Using Voice Control
1 Activate voice dialing using one of these methods:
• Say your Magic Word
• Press and hold a side volume key
• Press and hold the handsfree button
(when using handsfree or Bluetooth)
2 When prompted, say a command, such as “call”.
3 Wait for the beep. Now say the name of the contact
you want to call.
4 The phone will say “Calling Bob”. If there are
multiple numbers for that name, you will be
prompted to say the number type.
o
r
c
Voice Digit Dialing
f
It is possible to dial a phone number by speaking the
digits with a short pause between each digit. Each digit
already has an associated voice command in English,
but you can rerecord these commands if you wish.
See “Training Commands” on page 46.
1 Activate voice dialing using one of these methods:
• Say your Magic Word.
50Some menus/features are operator dependent.
N
o
t
o
m
m
• Press and hold a side volume key.
• Press and hold the handsfree button
(when using handsfree or Bluetooth).
2 When prompted, say “dial” and the digits for the
number you want to call. The phone will repeat
each number with either a Number Echo or Tone.
3 Say “call” to begin dialing.
Note!
r
e
Note!
Digit Feedback
When you are using Voice Digit Dialing, your phone will
respond to indicate that it understood your command.
Settings include
will echo the accepted digit while tone dialing will give
a quick tone to indicate the digit was accepted. Echo is
the default.
l
a
i
Say “clear” to clear a single digit. If you say clear
c
two times in a row, you will be asked if you want
to clear the entire number.
Say “verify” to hear all numbers played back
to you.
e
s
u
Number Echo and Ton e . Echo feedback
Deactivating Digit Feedback
Scroll to Settings,
,
Select
Echo
Voice Answering
You can answer or mute incoming calls by using your
voice, when using a car handsfree kit.
1 Scroll to
Voice Answer, check or uncheck Car Handsfree.
Changes made. Save? will appear. Press
2
save.
Answering Incoming Calls Using Voice
Commands
The prerecorded voice answer command is Answer. You
can rerecord this command if you wish. See “Training
Commands” on page 46.
1 The phone will beep three times and you will hear
“Incoming call. Answer?”.
Select
, choose On or Off.
Settings,
, Voice Control,
Select
o
N
Select
, Voice Control,
r
o
f
t
, Number
Select
Ye s
o
c
,
m
Voic e Me m os
to
m
Using Voice Control
2 Say
Yes, No, Answer, or Cancel (or the answering
command you trained).
Note!
The caller’s name or number will appear if the
caller is listed in your phonebook.
Note!
If you select No or Cancel, the caller will
l
continue to hear ringing until the call goes to
a
i
voicemail or until the network terminates the
c
r
call.
e
You can activate the voice memo feature, listen to
memos, and record new memos using your voice. The
Voice Memo icon on your standby screen indicates
voice memos.
1 Activate voice recognition using one of these
methods:
• Say your Magic Word.
• Press and hold a side volume key.
u
s
e
Some menus/features are operator dependent.
51
Using Voice Control
• Press and hold the handsfree button (when
using handsfree or Bluetooth).
Play or Record to quickly access the Voi ce
2 Say
Memo list or say Voice Memo to activate the feature
and see more options.
3 A list will appear with the memos you have recently
recorded. You have the following options:
Play to hear the most recent memo. The
• Say
elapsed time will appear as the memo plays.
Next to move forward and play the next
• Say
memo.
Previous to move backwards and play the
• Say
previous memo.
• Say
Record to create a new memo. The elapsed
time will appear. Press the left softkey to end
the recording or the right softkey to cancel the
recording.
• Say
52Some menus/features are operator dependent.
N
Cancel to return to the standby screen.
o
o
f
t
r
o
c
Problems when Recording
If your phone cannot detect speech, one of the following
might have happened:
• you spoke too softly – try speaking more loudly.
• you held the phone too far away – hold it as you
do during a call.
a
i
• the voice command was too short – it should be
c
around one second long.
r
e
• you spoke too late or too soon – speak immediately
m
after the tone.
s
u
l
m
Tips
• Try to record in an area where there is little or no
background noise.
• Try to record your voice with the same equipment
that you normally use with your phone. For
example, if you normally have your phone
connected to a car handsfree device when using
e
voice commands, record your voice commands
when your phone is in a car handsfree device.
• If you plan to use voice functions handheld mode,
hold the phone up to the ear in the position that
would normally be used on a call.
• Begin speaking after the tone ends.
• Keep in mind that longer voice tags provide a
higher recognition rate.
• Shorter tags may cause a lower recognition rate.
For example, the name “Rob” can easily be
confused with “Bob”.
• Record your voice using the same tone and
inflection as you would when normally speaking.
Try not to over-pronounce or speak too slowly
when recording.
• At anytime during voice recognition, you can
say “cancel” to stop recognition.
• Say “help” at anytime (except during Voice
Answering) to see and hear online help.
o
N
r
o
f
t
m
o
c
m
e
r
c
Using Voice Control
e
s
u
l
a
i
Some menus/features are operator dependent.
53
Inputting Text
Inputting Text
You can enter letters, for example, when you add names
to the phonebook, write text messages, or enter Internet
addresses.
Apart from the way you normally enter letters in your
phone, using multitap text input, you can use T9 Text
Input for entering text messages and email, for example,
if the input language you select supports this. T9 Text
Input is a predictive input method and is a quicker way
to write texts.
Input Language
r
o
o
f
t
Input Language is the language that appears when you
create phonebook entries, SMS messages, or email.
Languages may vary by market. The available input
languages are:
• English
• Spanish
• French
• Portuguese
54Some menus/features are operator dependent.
N
m
o
c
• abc ... (multitap input including numbers)
• 123 ... (numeric input only)
1 Scroll to
2 Scroll to the language that you want to use for
3 Press
r
e
Choosing Multiple Input Languages
m
You can choose more than one input language. This is
especially helpful if you plan to write messages in various
languages. When writing, you can switch to one of
your selected input languages by pressing and then
selecting
Multitap Text Input
When saving names in the phonebook or when writing
Internet addresses, you enter letters using multitap text
Settings,
Input Language,
l
a
i
entering letters,
c
Exit
to exit the menu.
Input Method.
u
s
Select
Check
e
Select
.
.
, Language,
Select
,
Inputting Text
input. You press each key as many times as needed to
show the letter you want. For instance,
• To e n t er an ‘A’, press
• To e n t er a ‘ B’, quickly press
• To shift between capital and lower-case letters,
press
*, then enter the letter.
C to delete letters, characters, or numbers.
• Press
Note!
You can also use the volume keys as a shortcut to
certain letters: To enter a ‘B’, press the upper side
volume key and press
lower side volume key and press
Note!
Press and hold a digit key to enter the digit
directly.
Press To Get ...
1
SPACE . @ ? ! - , & : ’ ¡ ¿ 1
2
A B C 2 À Á Â Ã Ç
3
D E F 3 È É Ê Ë
4
G H I 4 Ì Í Ï
5
J K L 5
Some menus/features are operator dependent.
2 once.
2 twice.
2. To enter a ‘C’, press the
o
f
t
o
N
r
2.
c
o
T9 Text Input
m
m
Press To Get ...
6
M N O 6 Ñ Ó Ô Õ
7
P Q R S 7
8
T U V 8 Ù Ú Û Ü
9
W X Y Z 9
0
+ - = * / < > 0
l
a
i
#
# @ ¿ & ~ % $ ^
c
r
e
You can use T9 Text Input when entering texts such as
text messages. The T9 Text Input method uses a built-in
dictionary to recognize the most commonly used word
for every sequence of key presses. With T9, you press
each key only once, even if the letter you want is not the
first letter on the key.
When you press the keys, different words are suggested.
If the word you want is not suggested, you can edit the
word using . The word is then added to the dictionary
so that it is suggested the next time you use T9.
u
s
e
55
Inputting Text
Using Predictive Text Input
You can toggle T9 on and off when you are creating a
text message.
1 Scroll to
2 Enter the recipient’s phone number or email
3 From the
4 Choose
5 Choose
6 Press the key with the corresponding letter only
• Accept Word and add a space - Press
• Accept Word without adding a space - Tilt joystick
•Decline Word - Press
•Edit Word - Press , Edit Word,
• Create a New Word - Press
56Some menus/features are operator dependent.
Messages,
New
,
Select
.
address.
Text: screen, press .
Input Method.
T9.
once. To enter a b, press
you want to write the word “How”, press
The word “How” appears.
right
joystick up or down to view alternate words
(candidates). Accept a candidate by pressing
word or tilt the joystick right and press
Select
, SMS,
1 one time. For example, if
o
f
t
o
0 repeatedly or tilt the
N
C to delete the entire
Select,
c
r
1
Select
C repeatedly
Send
4, 6, 9.
.
o
m
m
1
to delete each letter. Use multitap text input. The
word is added to the dictionary. The next time you
4, 6, 9, the word you just added to the
enter
dictionary will appear as one of the alternative
OK
a
.
e
s
u
l
Input Method, and select
words. Press
Note!
To toggle to multitap mode while creating an
SMS, press , select
i
Multitap.
c
r
e
Using the Calendar
Using the Calendar
You can use the calendar to keep track of important
meetings that you need to attend, phone calls that you
need to make, or tasks that you need to do.
You can also synchronize your calendar with your PC.
See “Synchronizing Your Phone and PC” on page 60.
Appointments and Tasks
You can save many appointments and tasks in your
calendar, depending on the size of each item. You can
choose to add a new appointment or task, or use an
old appointment or task as a template by copying and
editing it.
You can fill in different types of information about the
appointments or task.
Some menus/features are operator dependent.
N
o
o
f
t
r
o
c
Adding Events or Appointments
1 Scroll to Extras,
m
Add Apptmt.,
2 Choose the category of event or appointment,
Select
i
c
3 Press
r
e
4 Scroll to
m
and so on.
5 Scroll to
6 Press
press
7 Scroll to
8 Select the reminder interval you want, for example
5 Min Before,
If you choose
Select
. Enter a reminder time,
9 A list of options appears.
If the appointment is recurrent:
• Choose
Select
u
l
a
.
Edit
and enter a subject, OK.
Loc.:, press
Proceed?,
Select
and enter a start date. Scroll to Time,
Select
, enter a start time, and so on.
Proceed?,
OK
Other Reminder, enter a reminder date,
Recurrent App.,
Select
s
.
e
.
Edit
Save
Save
, Calendar,
, enter a location,
.
.
Select
Select
Select
.
.
,
57
Using the Calendar
• Choose the recurrence you want,
• If you want to set an end date, select
Select
. Enter a date,
If you want to change the class for your appointment:
• Choose
• Choose the class you want,
If you want to set the time zone for a meeting:
• Choose
• Choose a time zone,
10 Confirm with
Adding New Tasks
1 Scroll to Extras,
2 Choose a task,
58Some menus/features are operator dependent.
Class,
Time Zone,
will be adjusted automatically according to the time
zone you are in.
Add Task,
If you choose phone call, enter a number,
If you choose message, select a type of message,
Select
.
If you choose miscellaneous, select a type,
Select
Select
.
Select
Select
Save and Close,
Select
.
Select
, Calendar,
o
.
Select
N
Select
.
Select
o
f
End Date,
.
Select
r
Select
.
c
,
.
.
. Your meeting time
t
o
Select
Select
Select
3 Press
Select
4 Scroll to
5 If you want to set a reminder, scroll to
Reminder
6 A list of options appears. Confirm with
Close
Viewing Your Calendar
c
r
e
m
m
To view your calendar content, scroll to Extras,
Calendar,
•
View Today. This shows all the appointments
for the current day and the Tasks that have not
been completed. An icon appears next to those
appointments that cover the whole day.
View All Tasks. This shows all your entered Tasks.
.
.
•
Scroll to the task you want to view,
View Month. This shows a whole month, with the
•
current day in a square. Move within and among
the weeks by using the navigation key. Press
and enter a subject. Scroll to Descr.,
and enter a description.
Proceed?,
, OK. Enter a reminder date, OK.
,
Select
l
a
i
Select
and then select one of the following:
.
u
s
Save
e
.
Set
Select
Save and
Select
.
Select
,
Using the Calendar
to enter a certain day. Days on which you have
appointments are marked in bold.
View Week. This shows a whole week. All your
•
appointments and Tasks are shown as grey boxes.
You enter a certain day by pressing
day is highlighted.
Editing
You may wish to edit an appointment or a task, for
example, by changing the date or location.
Editing or Deleting Appointments
1 In the calendar, scroll to the day of the
appointment you want to edit,
2 Press .
3 Choose
Editing or Deleting Tasks
1 Scroll to Extras,
Some menus/features are operator dependent.
Edit, Delete, Reschedule, or Copy.
Tasks
,
Select
.
N
Select
t
o
, Calendar,
Select
c
r
o
f
Select
.
Select
when that
m
o
, View All
2 Choose a task.
Press to view the list of options. Options
Mark “Done”, Edit, Delete, and Copy.
include
3 When you have finished, scroll to
e
Calendar Settings
a
i
To view your calendar options, scroll to Extras,
c
r
m
Calendar,
e
the following:
Select
•
Status. Use this to check when you last
synchronized your calendar, and to see how much
space is left for new appointments and Tasks.
Class View. You can choose whether to see only
•
the private calendar entries, only the public ones
or both.
Delete All. Delete all appointments and Tasks in
•
the calendar.
Reminders. Turn on this function if yo u want your
•
phone to remind you even though the phone is
turned off. Options include
.
On
u
l
, Options,
s
Select
, and then select one of
Save,
Select
.
Select
Always and If Power
,
59
Using the Calendar
• Profile Switch. If you set the profile switch
reminder function to
Profile?
will appear when a meeting is about to
start. Press the left softkey to view the list of
profiles and select a profile. After the meeting,
you are asked to switch the profile again.
Synchronizing Your Phone and PC
You can synchronize your phonebook contacts,
calendar, and tasks between your mobile phone
and popular Microsoft® Windows™-based PIM
(Personal Information Management) applications using
XTNDConnect PC software. For more information
on synchronization, see “Synchronizing Your Phone and
PC” on page 39.
On, the question Switch
o
c
r
o
f
t
o
m
m
e
r
c
e
s
u
l
a
i
N
60Some menus/features are operator dependent.
Browser
Your phone includes a built-in browser that allows you to
access Internet content designed specifically for mobile
devices. Wireless Application Protocol (WAP) is a global
standard for advanced mobile service. WAP allows you to
access certain services on the Internet from your mobile
phone. This content typically includes Email, Calendar,
Contacts, Internet communication, e-commerce and
telephony services. Surfing the web with your Sony
Ericsson mobile phone is quick and easy.
When you launch your browser, your phone automatically
places a data call to establish a connection to the Internet.
While you are connected, you will see a globe icon ( ) on
the bottom row of your display.
Note!
While your browser is active and the globe icon is
displayed, you cannot make or receive voice calls.
If you need to make a call, press and hold the
right softkey to return to the
Press and hold the right softkey again to return
to the standby screen and then dial the number.
N
o
o
f
t
Browser menu.
r
o
c
After a period of inactivity (new content is not sent or
received), the phone call placed to establish your WAP
connection automatically ends and the globe icon disappears.
c
r
e
m
m
Browser Features
Your Browser gives you the following features (depending
on your service provider):
• Microbrowser for sending/receiving email and for
Internet access
• Support for Phonebook download
• Bookmark creation
• Image support
Browser
e
s
u
l
a
i
Some menus/features are operator dependent.
61
Browser
• Automatic time-out which disconnects data calls
after periods of inactivity
Launching Your Browser
Scroll to Browser,
Exiting Your Browser
There are two easy ways to exit your Browser:
• To make a call, press and hold the right softkey to
return to the
• Press to enter the
Exit Browser,
to
Downloading Melodies
To download melodies using your browser, navigate to a
WAP site that supports ring melody download using the
text/x-emelody or text/x-vmel MIME (internet content)
type. When your phone receives a melody of this type,
62Some menus/features are operator dependent.
Select
, Launch Browser,
Standby menu.
Browser options menu. Scroll
Select.
o
r
o
f
t
N
Select.
c
o
m
you will first be prompted to play the song, and then to
save the song into one of the My Melody storage slots on
your phone.
Downloadable Content
u
s
e
Your mobile phone has the capability to load, store, and
forward additional ringtone melodies. The use of such
melodies may be restricted or prohibited by rights of
third parties, including but not limited to restriction
under applicable copyright laws. You, and not Sony
r
Ericsson, are entirely responsible for additional melodies
e
that you download to or forward from your mobile
m
phone. Prior to use of any additional melodies, please
verify that your intended use is properly licensed or is
otherwise authorized. Sony Ericsson does not guarantee
the accuracy, integrity, or quality of any additional
ringtones or any other third party content. Under no
circumstances will Sony Ericsson be liable in any way for
your improper use of additional ringtones or other third
party content.
c
l
a
i
Browser
Connection Status
Connection status is displayed on the bottom row of
the screen, in place of the softkey labels, when you
are operating the browser and at various times during
operation. Connection status includes the following:
•
Connecting...
•
Sending)))
•
Receiving(((
Working ...
•
Softkeys
The globe icon ( ), located between the softkey labels on
the bottom row of your display, indicates a connection to
the data network. In some instances, other icons alternate
with the globe icon during a WAP session.
• indicates low battery power.
• indicates an incoming message.
Some menus/features are operator dependent.
N
o
o
f
t
r
o
c
m
Icons
5
2
1
3/4
u
s
e
Press * once to switch between the date/time, icon list,
and the softkey screen.
1
r
e
2
m
3
4
5
6
l
Signal strength icon shows the relative signal
a
i
strength from the wireless system. More bars
c
indicate a stronger signal.
Globe icon indicates that you have established
a connection with the data network.
Ringer Off indicates that your phone will not make
any ring sounds.
Silent Mode indicates that your phone will not
make any sounds.
Keypad Lock indicates that your keypad is locked
and will not recognize any key presses.
Battery icon shows the relative strength of your
battery. A full icon indicates a fully-charged battery.
6
63
Browser
Browser Options Menu
While you are browsing, you can reach different
browsing options by pressing and holding. These
options can include:
Home
Select Home to return to your Home Page.
Exit Browser
Select Exit Browser if you want to end your Browser
session and return to the
Reload
Select Reload to refresh a page.
Bookmarks
Select Bookmarks to see the list of bookmarks that
you have set.
Mark Site
Select Mark Site to set your bookmarks.
64Some menus/features are operator dependent.
Browser menu.
t
o
N
o
c
r
o
f
Show URL
Select Show URL to display the URL of the current page.
About Openwave
Select About Openwave to display version information
about the browser.
Advanced
Home Page - Allows you to edit your default Home Page.
r
Restart Browser - Clears the cache and attempts to
e
connect to your Home Page.
m
m
Encryption - A security code computed by your browser
for authentication. You can verify your encryption
with the
new encryption key by selecting
contact your service provider prior to making any
encryption changes.
Browser Key Functions
Use the following table to help you with the different
ways to navigate through the pages that appear in your
l
a
i
c
Verify Key submenu. You can also select a
u
s
e
New Key. You should
Browser
content window. Some keys operate differently when you
are navigating a page and when you are entering text.
Page NavigationText Input
Press to select the left
softkey.
Press to select right
softkey.
Press to enter Browser
Options.
Go Back.Delete last
• Move through menu,
lists, or text. Tilt up or
down to go to the
previous or next row.
• Press down on the center
of the joystick to select
(same function as left
softkey in most
instances).
Some menus/features are operator dependent.
N
Press to select the left
softkey.
Press to select right
softkey.
Press to enter Browser
Options.
character/letter entered.
Long press deletes all
characters.
f
Move through
t
characters/letters.
o
o
r
o
c
Page NavigationText Input
Display status icons on
the bottom row of the
screen.
Long press to enter
bookmarks.
Select numbers displayed
on the page.
c
Long press to go to
r
bookmarks.
e
m
Move u p or down
m
through pages.
Browser Text Entry
You can enter characters in four different modes. The
active format is displayed in the right softkey position.
Change the format in which characters are entered by
pressing the right softkey.
Toggle capitalization.
e
s
u
l
a
i
Enter punctuation
characters.
Enter text and characters.
Press and hold to enter
0-9
the number.
65
Browser
1 A...Z mode allows you to enter alphabetic text.
Press the appropriate key,
the desired letter, character, or digit appears in
the display. For example, to enter an a, press the
numeric key
key
Press To Get ...
1
2
3
4
5
6
7
8
9
0
#
2
SYM1 mode allows you to select symbols and
punctuation from a list. You can switch to symbol
entry by pressing the right softkey until
66Some menus/features are operator dependent.
2 once. To enter a b, press the numeric
2 twice.
SPACE . , : ; ? ! ¿ ¡ _ " ’ « » ( ) 1
A B C 2 À Á Â Ã Ç
D E F 3 È É Ê Ë
G H I 4 Í Î Ï
J K L 5
M N O 6 Ñ Ó Ô Õ
P Q R S 7
T U V 8 Ù Ú Û Ü
W X Y Z 9
/ * - + = < > 0
#@¿ &~%$^
N
0-9, or # repeatedly until
c
r
o
f
t
o
Sym
o
m
m
is in
the right softkey position. There are four screens
of symbols. Press the left softkey to switch between
each screen. Press the digit key corresponding to
the symbol that you want to enter. Your phone
automatically switches back to the previously-used
method of text entry after you enter one symbol.
SYM1 . ? ! , ; : ‘ ’ "
l
SYM2 . @ \ / | _ ~ $ ^
a
i
SYM3 + - * / < > = % #
c
r
e
SYM4 { } [ ] ( ) < > &
u
s
e
Browser
3 0...9 mode allows you to enter numbers by pressing
the digit key corresponding to the number that you
want to enter.
T9 Predictive mode allows you to use Tegic T9
4
predictive text input. Predictive text input software
allows you to quickly and easily enter words or
entire sentences with just one key press per letter.
Predictive text entry software uses the phone’s
internal dictionary to quickly scan possible
variations to determine the correct word.
If you enter all your letters and the word that you
want does not appear, press
in your phone’s dictionary. Keep pressing
your word appears.
For example, to enter the word “ball”, press
5. After the first 2, your screen displays “c”. After
the second 2, your screen displays “ca”. After the
first 5, your screen displays “call”. After the second
Some menus/features are operator dependent.
N
0 to view other matches
r
o
f
t
o
c
m
o
0 until
2, 2, 5,
5, your screen displays “call”. Press the
the word “ball” is displayed.
Note!
You will know that there is no word match in the
T9 dictionary when your key presses are no
longer recognized by T9 text entry mode.
If your word does not appear, you can add it into
l
your phone’s dictionary by doing the following:
a
i
c
r
• Type the text that you want to enter into your
e
m
phone’s dictionary by using any of the non-T9
text entry modes.
• With the cursor to the right of the last character
(without pressing a space) reselect T9 mode by
pressing the right softkey until T9 appears in the
right softkey position.
u
s
e
0 key until
67
Browser
• Tilt right to enter a space. Your word is added
to your phone’s dictionary when your phone is
properly powered down.
Note!
It may be helpful not to look at the screen until
you are finished entering all characters as a new
word match may occur with each new character
entered.
e
r
c
l
a
i
u
s
e
m
m
o
c
r
o
f
t
o
N
68Some menus/features are operator dependent.
Troubleshooting
Tr ou b l es h oo t i ng
My phone
does not
turn On.
My phone
does not ring
when a call
is received.
My signal
strength
varies.
Some menus/features are operator dependent.
1 Recharge or replace the battery.
2 Press and hold the Power key.
3 Be sure the battery is correctly
inserted.
Check for Ringer Off ( ) or Silent
Mode () icons on the standby
screen. Press and hold
Silent Mode. Turn the ringer on in
the
Settings menu.
This is a common occurrence.
Transmitters are set in geographic
areas and coverage is not 100% all
of the time. Signal strength varies
N
as you travel between cells.
o
o
f
t
C to turn off
o
c
r
m
I cannot
receive a
data call.
I am having
e
problems
m
downloading
information.
r
c
If you are having trouble receiving a
e
data call, you may need to configure
s
your phone manually to receive a
u
data call. See the “T61c Advanced
l
a
Features” insert.
i
If you are having problems
downloading information from the
Internet during a wireless modem
session, make sure that your phone is
still in Wireless Modem Operation
by checking your phone’s display.
If you travel to a region with a
weak signal, the connection can be
dropped. If this happens, you will
need to re-establish a connection to
the internet once you have enough
signal strength.
69
Troubleshooting
I do not see
the WAP
icon.
My standby
screen keeps
disappearing
and I only
see a few
lines of text.
If you do not see the WAP icon, you
are not in an area with strong enough
service to establish a connection.
You may have
activated.
battery power. The text on
the standby screen is reduced to
two rows in the middle of the
display a few minutes after you
have pressed a key.
To t ur n of f
Settings,
Display Sleep,
Display Sleep
Display Sleep saves
Display Sleep, go to
Select
, Display,
Select
r
o
f
t
o
, Off.
c
Select
o
N
70Some menus/features are operator dependent.
Accessories, Accessibility, and
Internet
Technical Assistance/Customer Service
Note!
Before calling the customer care line, locate the
l
label underneath your battery. You will need to
a
i
remove the back cover, but you do not need to
c
r
remove the battery to see the label. Simply lift the
e
m
,
m
Ordering Accessories
battery. The customer care representative will
need information from your label to assist in
processing your call.
• United States - 1-800-374-2776
• Latin America - +1-305-755-6789
• Canada - 1-800-668-2101
• Other Countries - +1-919-472-7908
You can purchase Ericsson branded or Sony Ericsson
branded accessories intended for use with this product
by:
u
s
e
• Visiting http://www.SonyEricsson.com/US (US
Only)
• Calling 1-800-374-2776 (US Only)
• Calling 1-800-755-6789 (Puerto Rico)
• Visiting Your Local Ericsson or Sony Ericsson
Retailer
Accessible Solutions/Special Needs
For information on Accessible Solutions for individuals
with special needs call the Sony Ericsson Special Needs
Center at +1-877-878-1996 (TTY) or +1-877-207-2056
(voice), or visit the Sony Ericsson Special Needs Center
at: http://www.SonyEricsson-snc.com
Internet
o
o
f
t
Visit Sony Ericsson Mobile Communications on
the internet at:
http://www.SonyEricsson.com
Mobile Internet
Visit the Sony Ericsson Mobile Internet at:
www.SonyEricsson.com/mobileinternet
to synchronization software, customer services, user’s
guides, and other useful information.
N
o
c
r
for online access
m
m
e
r
c
Tr ou b l es h oo t i ng
e
s
u
l
a
i
Some menus/features are operator dependent.
71
Limited Warranty
Limited Warranty
Sony Ericsson Mobile Communications (USA) Inc.
(Sony Ericsson), provides this Limited Warranty for your
mobile phone and original accessory delivered with your
mobile phone (hereinafter referred to as “Product”).
Should your Product need warranty service, please return
it to the dealer from whom it was purchased, or contact
your local Sony Ericsson Customer Care Center
(national rates may apply) or visit
www.SonyEricsson.com
Our Warranty
Subject to the conditions of this Limited Warranty, Sony
Ericsson warrants this Product to be free from defects in
design, material, and workmanship at the time of its
original purchase by a consumer, and for a subsequent
period of one (1) year.
72Some menus/features are operator dependent.
to get further information.
c
r
o
f
t
o
N
o
What We Will Do
If, during the warranty period, this Product fails to
operate under normal use and service, due to defects in
design, materials, or workmanship, Sony Ericsson
authorized distributors or service partners, in the country
c
r
where you purchased the Product, will, at their option,
e
either repair or replace the Product in accordance with
m
m
the terms and conditions stipulated herein.
Sony Ericsson and/or its service partners reserve the right
to charge a handling fee if a returned Product is found
not to be under warranty according to the conditions
below.
Conditions
1 The warranty is valid only if the original proof of
purchase issued to the original purchaser by the
dealer, specifying the date of purchase and serial
e
s
u
l
a
i
Limited Warranty
number*, is presented with the Product to be
repaired or replaced. Sony Ericsson reserves the
right to refuse warranty service if this information
has been removed or changed after the original
purchase of the Product from the dealer.
2 If Sony Ericsson repairs or replaces the Product, the
repaired or replaced Product shall be warranted for
the remaining time of the original warranty period
or for ninety (90) days from the date of repair,
whichever is longer. Repair or replacement may
involve the use of functionally equivalent
reconditioned units. Replaced parts or components
will become the property of Sony Ericsson.
3 This warranty does not cover any failure of the
Product due to normal wear and tear, or due to
misuse, including but not limited to use in other
than the normal and customary manner, in
accordance with the Sony Ericsson instructions for
use and maintenance of the Product. Nor does this
warranty cover any failure of the Product due to
accident, modification or adjustment, acts of God,
or damage resulting from liquid.
Some menus/features are operator dependent.
N
o
f
t
o
r
c
o
m
4 Since the cellular system on which the Product is to
operate is provided by a carrier independent from
Sony Ericsson, Sony Ericsson will not be
responsible for the operation, availability, coverage,
services, or range of that system.
5 This warranty does not cover Product failures
caused by installations, modifications, or repair or
l
a
opening of the Product performed by a non-Sony
i
c
Ericsson authorized person.
r
6 The warranty does not cover Product failures which
e
m
have been caused by use of accessories or other
peripheral devices which are not Ericsson or Sony
Ericsson branded original accessories intended for
use with the Product.
7 Tampering with any of the seals on the Product will
void the warranty.
8 THERE ARE NO EXPRESS WARRANTIES,
WHETHER WRITTEN OR ORAL, OTHER
THAN THIS PRINTED LIMITED
WARRANTY. ALL IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
u
s
e
73
Limited Warranty
PARTICULAR PURPOSE, ARE LIMITED TO
THE DURATION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL SONY
ERICSSON OR ITS LICENSORS BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE
WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOST PROFITS OR
COMMERCIAL LOSS, TO THE FULL
EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW.
Some countries/states do not allow the exclusion or
limitation of incidental or consequential damages, or
limitation of the duration of implied warranties, so the
preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s
statutory rights under applicable legislation in force, nor
the consumer’s rights against the dealer arising from their
sales/ purchase contract.
* In some countries/regions additional information is
requested. If so, this is clearly shown on the valid proof of
purchase.
5Display
6 Language
7Time and Date
8Locks
9Voice Control
0 DataFaxModem
N
Note! You can quickly access menus and settings from within the
menu structure using the numbers that appear next to the menu
or setting name. For instance, to access Sounds & Aler ts in the
Settings menu, press 4, 1.
Note! *Ongoing Call will appear in place of Call Info when on an