Q: Steps involved in resetting the unit?
A: Using a ball-point pen or similar object, press on the reset flat buttom on the front control panel.
Q: What is the purpose of the BTM button?
A: The BTM button works automatically to scan available stations and automatically tune to those stations having acceptable strength.
Q: Does this device have a provision to connect a WALKMAN?
A: Indeed, there is a WALKMAN soft plug for connecting a WALKMAN or other audio devices.
Q: What is the maximum number of stations that I can save?
A: There are a maximum of thirty presets possible, among those are twenty FM and ten AM.
Q: What can I do if the radio signal is weak?
A: Manual tuning to a stronger station should be attempted or reposition the antenna.
Q: Can the station name be shown separately and if so how?
A: Yes, the station memo function can show names of the radios in the display window.
Q: What steps do I take in cleaning the connectors?
A: Remove the front pane and using a cotton bud wipe the connectors to remove any dirt.
Q: Is there simultaneous viewing of TV while listening to CDs?
A: Yes since the simultaneous play feature allows you to view the audio from a CD/player device as you are watching a TV/video.
Q: In what way can I set the clock?
A: The watch’s buttons are set and pressed in the following order: Hold the hour minute digits you wish to be set, then release to let the clock commence. First press the DSPL button and then, hold.
Q: What are the unit’s dimensions?
A: Its dimensions are in the range of approximately 478 x 50 x 158 millimeters.