This is the Xperia™ Z3 Tablet Compact User Guide for the Android™ 6.0 software
version. If you're not sure which software version your device is running, you can check it
in the Settings menu.
System and application updates can present the features in your device in another way than
described in this User Guide. The Android™ version might not be affected in an update. For
more information about software updates, see
To check the current software version of your device
1
From your Homescreen, tap
2
Find and tap Settings > About tablet > Android™ version.
To Find the Model Number and Name of Your Device
1
From your Home screen, tap
2
Find and tap
The device model number and name are displayed.
.
.
.
Limitations to Services and Features
Some of the services and features described in this User Guide may not be supported in
all countries or regions, or by all networks or service providers. The GSM International
Emergency Number can always be used in all countries, regions, networks and by all
service providers, provided that the device is connected to the cellphone network.
Please contact your network operator or service provider to determine the availability of
any specific service or feature and whether additional access or usage fees apply.
The use of certain features and applications described in this guide may require access
to the internet. You may incur data connection charges when you connect to the internet
with your device. Contact your wireless service provider for more information.
A protective plastic sheet is attached to the screen. You should peel off this sheet before
using the touchscreen. Otherwise, the touchscreen might not function properly.
To insert a memory card
fine-tipped pen or other similar tool to insert the memory card.
Insert a fingernail into the gap between the memory card slot cover and the
device, then detach the cover.
2
Place the memory card in the memory card slot, with the gold-colored contacts
facing down, then push the memory card all the way into the slot until you hear a
locking sound.
3
Re-attach the memory card cover.
To Remove the Memory Card
1
Turn off the device and detach the memory card slot cover.
2
Push the memory card inward, and then release it immediately.
3
Draw the memory card fully outward and remove it.
4
Re-attach the cover.
You can also remove the memory card without turning the device off as described in step 1.
To use this method, you must first unmount the memory card. Tap Settings > Storage, then
tap beside SD card, and then follow the rest of the instructions above.
Screen Protection
Before using your device, remove the transparent protection
protruding tab.
film by pulling up on the
It is recommended to protect your device with a Sony-branded screen cover or a
protector intended for your Xperia™ model. The use of third-party screen protection
accessories may prevent your device from working correctly by covering sensors, lenses,
speakers, or microphones, and can invalidate the warranty.
Starting Your Device for the First Time
It is recommended that you charge the battery for at least 30 minutes before starting up
your device for the first time. You can still use your device while it is charging. For more
information on charging, see
Charging Your Device
The first time you start your device, a setup guide helps you to configure basic settings,
personalize your device, and sign in to your accounts, for example a Google™ account.
To turn on the device
Make sure that the battery is charged for at least 30 minutes before you turn on the device for
the first time.
Press and hold down the power key until the device vibrates.
2
Wait a while for the device to start.
To Turn off the Device
1
Press and hold down the power key
2
In the options menu, tap Power off.
It may take a while for the device to shut down.
until the options menu opens.
Why do I need a Google™ account?
Your Xperia™ device from Sony runs on the Android™ platform developed by Google™.
A range of Google™ applications and services is available on your device when you
purchase it, for example, Gmail™, Google Maps™, YouTube™ and the Play Store™
application, which gives you access to the Google Play™ online store for downloading
Android™ applications. To get the most out of these services, you need a Google™
account. For example, a Google™ account is mandatory if you want to:
•
Download and install applications from Google Play™.
•
Synchronize email, contacts and the calendar using Gmail™.
•
Chat with friends using the Hangouts™ application.
•
Synchronize your browsing history and bookmarks using the Google Chrome™ web
browser.
•
Identify yourself as the authorized user after a software repair using Xperia™ Companion.
•
Remotely find, lock or clear a lost or stolen device using the my Xperia™ or Android™
Device Manager services.
For more information about Android™ and Google™, go to
http://support.google.com
.
It is crucial that you remember your Google™ account username and password. In some
situations, you may need to identify yourself for security reasons using your Google™ account.
If you fail to give your Google™ username and password in such situations, your device is
locked. Also, if you have more than one Google™ account, make sure to enter the details for
the relevant account.
To Set up a Google™ Account on Your Device
1
From your Homescreen, tap .
2
Find and tap Settings > Accounts > Add account > Google.
3
Follow the registration wizard to create a Google™ account, or sign in if you
already have an account.
You can also sign in to or create a Google™ account from the setup guide the
start your device. Or you can go online and create an account at
You can prevent other people from using your device without your permission. For
example, if your device is lost, stolen, or wiped, only someone with your Google™
account or screen lock information can use the device. To make sure your device is
protected, it is important that you set a secure screen lock and add your Google™
account to your device. It is crucial that you remember both your screen lock information
and your Google™ account credentials. To make sure your device is protected, you can:
•
Set a secure screen lock on your device, that is, a PIN, password, or pattern screen lock
to prevent anyone from resetting your device. For more information, see
the 10 page.
•
Add a Google™ account to prevent others from using your device if it gets stolen and/or
wiped. For more information, see
•
Activate either the “Protection by my Xperia” or the Android™ Device Manager web
Why do I need a Google™ account?
service. Using one of these services, you can remotely locate, lock, or format a lost
device. For more information, see
Finding a lost device
on the 16 page.
Verifying the Ownership of Your Device
Certain protection features require you to either unlock your screen with your PIN,
password, or pattern, or enter your Google™ account information. Below are examples
of protection features and some of the required credentials:
Screen Lock
on the 9 page.
on
Factory Data
Reset
protection
Protection by
my Xperia
You must unlock your screen before you are allowed to perform a Factory
Data Reset.
If you remotely reset your device using this service, you must enter the
username and password for a Google™ account associated with the
service. The device must be connected to the internet before the setup
process can be completed. Otherwise, you will not be able to use your
device after the reset.
Android™
Device
Manager
If you remotely reset your device using this service, you must enter the
username and password for a Google™ account. The device must be
connected to the internet before the setup process can be completed.
Otherwise, you will not be able to use your device after the reset.
Software repair
If you use the Xperia™ Companion software to perform a software repair,
you’re asked to enter your Google™ account username and password
when you start the device after the repair is complete.
For Android™ Device Manager, it is necessary to enter information from a Google™ account.
This can be any Google™ account which you have set up on the device as an owner. If you
cannot provide the relevant account information during a setup process, you won't be able to
use the device at all.
Screen Lock
There are several ways to lock the screen. The security level of each lock type is listed
below in order of weakest to strongest:
•
Swipe
– no protection, but you have quick access to the Homescreen
•
Pattern
– draw a simple pattern with your finger to unlock your device
•
PIN
– enter a numeric PIN of at least four digits to unlock your device
– enter an alpha-numeric password to unlock your device
It is very important that you remember your screen unlock pattern, PIN, or password. If you
forget this information, it may not be possible to restore important data such as contacts and
messages.
To Create a Screen Lock Pattern
1
From your Homescreen, tap
2
Find and tap Settings > Security > Screen lock > Pattern.
3
Follow the instructions on your device.
If your lock pattern is rejected five times in a row when you try to unlock your device, you must
wait 30 seconds before you can try again.
.
To change screen lock type
1
From your Homescreen, tap .
2
Find and tap Settings > Security > Screen lock.
3
Follow the instructions in your device and select another screen lock type.
To change the screen lock pattern
1
From your Homescreen, tap
2
Find and tap Settings> Security > Screen lock.
3
Draw your screen unlock pattern.
4
Tap Pattern and follow the instructions on your device.
.
To Create a Screen Lock PIN
1
From your Homescreen, tap .
2
Find and tap
3
Enter a numeric PIN, then tap Continue.
4
Re-enter and confirm your PIN, then tap OK.
5
Follow the instructions on your device.
Settings
>
Security
>
Screen lock
>
PIN
.
To Create a Screen Lock Password
1
From your Homescreen, tap
2
Find and tap
3
Enter a password, then tap Continue.
4
Re-enter and confirm your password, then tap OK.
5
Follow the instructions on your device.
Settings
>
.
Security
>
Screen lock
>
Password
.
To Activate The Swipe Unlock Function
1
From your Homescreen, tap .
2
Find and tap
3
Draw your screen unlock pattern, or enter your PIN or password if one of these
Settings
>
Security
>
Screen lock
.
screen lock types is enabled.
4
Tap Swipe.
Resetting a Forgotten Screen Lock
If you forgot your screen lock PIN, password, or pattern, you might be able to reset it
using the Protection by my Xperia service. No content on your device is lost after you
perform a screen lock reset using the Protection by my Xperia service.
To activate the Protection by my Xperia service, see
page.
To Reset the Screen Lock using Protection by my Xperia
1
Make sure you know your Google™ account username and password and that
you have enabled the Protection by my Xperia service on your device.
2
Go to
myxperia.sonymobile.com
3
Sign in using the same Google™ account you have set up on your device.
4
Click the picture of your device under Your devices.
5
Select Lock or Change PIN2 to replace the current screen lock with a new PIN
using any internet-connected device.
code.
6
Follow the on-screen instructions provided by Protection by my Xperia.
Depending on your security settings, your device may lock after a screen lock reset. You then
need to enter your Google™ account username and password in order to use the device.
Unlocking Your Device Automatically
The Smart Lock feature may not be available in every market, country, or region.
The Smart Lock feature makes unlocking your device easier by letting you set it to unlock
automatically in certain situations. You can keep your device unlocked, for example,
when it’s connected to a Bluetooth® device or when you’re carrying it with you.
You can set Smart Lock to keep your device unlocked using the following settings:
•
Trusted face: Unlock your device by looking at it.
•
Trusted voice: Set up voice recognition to search in any screen.
•
Trusted devices
is connected.
•
Trusted places
•
On-body detection: Keep your device unlocked when you’re carrying your device with
you.
You have to manually unlock your device if you don’t use it for 4 hours and after you
restart it.
: Keep your device unlocked when a trusted Bluetooth® or NFC device
: Keep your device unlocked when you're in a trusted location.
The Smart Lock feature is developed by Google™ and the exact functionality may change over
time due to updates from Google™.
To Enable Smart Lock
1
Make sure you’ve set a pattern, PIN, or password for your screen lock.
2
From your Homescreen, tap
3
Find and tap
4
Drag the slider beside Smart Lock (Google) to the right.
5
Tap the back arrow next to
6
Find and tap Smart Lock.
7
Enter your pattern, PIN, or password. You need to enter this screen lock every
Settings
>
.
Security
Trust agents
>
Trust agents
.
.
time you want to change your Smart Lock settings.
8
Select a Smart Lock type.
Setting When to Keep the Device Automatically Unlocked
You can set Smart Lock to keep your device unlocked using the following settings:
•
Trusted devices – Keep your device unlocked when a trusted Bluetooth® device is
connected.
•
Trusted places – Keep your device unlocked when you're in a trusted location.
•
On-body detection – Keep your device unlocked when you're carrying your device with
you.
•
Trusted face – Unlock your phone by looking at it.
•
Trusted voice – Set up voice recognition to search in any screen.
You have to manually unlock your device when you don't use it for 4 hours and after you
restart it.
You can designate a connected Bluetooth® device as a trusted device and keep your
Xperia™ device unlocked while it’s connected to it. So if you have Bluetooth® devices
that you connect to regularly, such as a car speaker or home entertainment system, a
Bluetooth® watch or a fitness tracker, you can add them as trusted devices and bypass
the added security of the lockscreen to save time. This feature is suitable if you’re
normally in a relatively secure place when you use these devices. In some cases, you
may still need to manually unlock your device before a trusted device can be connected.
It is not recommended to add devices that are constantly connected to your device as trusted
devices, such as Bluetooth® keyboards or cases.
As soon as a trusted Bluetooth® device is switched off or moves out of range, your screen
locks and you need your PIN, pattern, or password to unlock it.
To Add a Trusted Bluetooth® Device
1
Make sure your device is paired and connected to the Bluetooth® device you
want to add as a trusted device.
2
In the Smart Lock menu, tap Trusted devices.
3
Tap Add trusted device > Bluetooth.
4
Tap a device name to select it from the list of connected devices. Only paired
devices appear in this list.
5
Depending on the security of your connection, you may need to manually unlock
your device before the trusted device can keep it unlocked.
To Remove a Trusted Bluetooth® Device
1
From your Homescreen, tap
2
Find and tap
3
Tap the device you want to remove.
4
Tap
Remove trusted device
Settings
>
.
Security
.
>
Smart Lock
>
Trusted devices
.
Making Sure You're Secure when Using Trusted Devices
Different Bluetooth® devices support different Bluetooth® standards and security
capabilities. There's a chance someone could keep your Xperia™ device unlocked by
imitating your Bluetooth® connection, even if your trusted device is no longer nearby.
Your device is not always able to determine whether your connection is secure from
someone trying to imitate it.
When your device can't determine that you're using a secure connection, you'll get a
notification on your Xperia™ device and may need to manually unlock it before the
trusted device can keep it unlocked.
Bluetooth® connectivity range can vary depending on factors like the model of your
device, the connected Bluetooth® device, and your environment. Depending on these
factors, Bluetooth® connections can work over distances of up to 325 feet (100 meters).
If someone takes your Xperia™ device while it's near a trusted device, they may be able
to access your Xperia™ device if the trusted device has unlocked it.
Connecting to Trusted Places
When the Trusted places feature is set up, the lockscreen security on your Xperia™
device gets disabled when you are in a designated trusted location. For this feature to
work, you must have an internet connection (preferably over Wi-Fi) and allow your device
to use your current location.
To set up trusted places, first make sure high-accuracy location mode or battery-saving
location mode is enabled on your device before you add home or custom locations.
The exact dimensions of a trusted location are an estimate and may extend beyond the
physical walls of your home or other areas you have added as trusted locations. This feature
can keep your device unlocked within a radius of up to 80 meters. Also be aware that location
signals can be replicated or manipulated. Someone with access to specialized equipment
could unlock your device.
Make sure location is turned on and you are using either the High accuracy or
Battery saving Location mode setting.
2
From your Homescreen, tap .
3
Find and tap Settings > Security > Smart Lock > Trusted places > Home.
4
Tap Turn on this location.
To Edit Your Home Location
1
Make sure location mode is turned on and you are using either the High accuracy
or Battery saving setting.
2
From your Homescreen, tap
3
Find and tap Settings > Security > Smart Lock > Trusted places.
4
Select your home location.
5
Tap Edit.
6
In the search bar, enter the location you want to use as your home location.
If your home has multiple buildings at the same address, the trusted place you want to add
might be different from the actual address. To ensure better location accuracy, you can add
the actual location of your home within the building complex as a custom place.
.
To Remove Your Home Location
1
Make sure location mode is turned on and you are using either the High accuracy
or
Battery saving
2
From your Homescreen, tap .
3
Find and tap
4
Tap Turn off this location.
setting.
Settings
>
Security
>
Smart Lock >Trusted places
>
Home
.
Using Custom Locations
You can add any location as a trusted, custom place where your device can remain
unlocked.
To Add a Custom Place
1
Make sure location mode is turned on and you are using either the High accuracy
or
Battery saving
2
From your Homescreen, tap
3
Find and tap
4
Tap Add trusted place.
5
To use your current location as a trusted, custom place, tap
6
Alternately, to enter another location, tap the magnification glass icon and type the
address. Your device searches for the entered location. To use the suggested
address, tap the address.
7
To fine-tune the location, tap the back arrow next to the address, then drag the
location pin to the desired location and tap Select this location.
To Edit a Custom Place
1
Make sure location mode is turned on and you are using either the High accuracy
or Battery saving setting.
2
From your Homescreen, tap
3
Find and tap Settings > Security > Smart Lock > Trusted places.
4
Select the place you want to edit.
5
Tap Edit Address.
6
To enter another location, tap the magnification glass icon and type the address.
Your device searches for the entered location. To use the suggested address, tap
the address.
7
To fine-tune the location, tap the back arrow next to the address, then drag the
location pin to the desired location and tap Select this location.
Make sure location mode is turned on and you are using either the High accuracy
or Battery saving setting.
2
From your Homescreen, tap .
3
Find and tap Settings > Security > Smart Lock > Trusted places.
4
Select the place you want to remove.
5
Tap Delete.
Keeping Your Device Unlocked while You’re Carrying It
Using the On-body detection feature, you can have your device stay unlocked when you
have it on you, for example, if you're carrying it in your hand, pocket, or bag. The
accelerometer in your device keeps your device unlocked when it senses that it's being
carried. The device locks when the accelerometer detects that the device has been put
down.
The On-body detection feature can't distinguish whose body is connected. If you give your
device to someone else while it's unlocked using On-body detection, your device may stay
unlocked for the other user. Keep in mind that On-body detection as a security feature is less
secure than a pattern, PIN, or password.
To Enable On-Body Detection
1
From your Homescreen, tap .
2
Find and tap Settings > Security > Smart Lock > On-body detection.
3
Drag the slider to the On position, and then tap
Continue
.
Using On-body Detection
When you use the On-body detection feature, you need to be aware of the following
behaviors:
•
When your device senses that it's on your body, it stays unlocked after you unlock it.
•
Any time you put your device down and it senses that it's no longer on your body, your
device locks automatically.
•
After you put your device down, for example, if you place it on a table, your device can
take up to one minute to lock.
•
After you get into a car, bus, train, or other land vehicle, your device can take between 5
and 10 minutes to lock.
•
Note that when you get on an airplane or a boat (or other non-land-based vehicles), your
device may not lock automatically, so be sure to lock it manually if needed.
•
When you pick up your device again or get out of the vehicle, just unlock it once and
your device then stays unlocked for as long as you have it on you.
To Turn off On-Body Detection
1
From your Homescreen, tap
2
Find and tap Settings > Security > Smart Lock > On-body detection.
3
Drag the slider to the Off position.
.
Finding the identification number of your device
Your device has a unique ID (identification) number. You should keep a copy of this
number. You may require it, for example, when you access the Xperia™ Care support
service and need to register your device.
Insert the tip of an unfolded paper clip (or a similar object with a long, fine tip) into
the hole in the label tray, then drag the tray outward to view the ID number.
To View the Device ID Number via the Device Settings
1
From your Homescreen, tap
2
Find and tap
3
Scroll to IDID to view the ID number.
Settings
>
.
About tablet
>
Status
.
Finding a lost device
If you have a Google™ account, the my Xperia web service can help you locate and
secure your device if you ever lose it. You can:
•
Locate your device on a map.
•
Sound an alert, even if the device is in silent mode.
•
Remotely lock the device and make the device display your contact information to
anyone who finds it.
•
As a last resort, remotely clear the internal and external memory of the device.
The my Xperia service may not be available in all countries/regions.
To Activate the My Xperia Service
1
From your Homescreen, tap .
2
Find and tap Settings > Security > Protection by my Xperia > Activate.
3
Mark the checkbox, then tap Accept.
4
If prompted, sign in to your Sony Entertainment Network account, or create a new
one if you don’t have one.
5
Enable location services on your device if this function is not already enabled.
To verify that the my Xperia service can locate your device, go to
and sign in using either the Google™ account or the Sony Entertainment Network account that
you have set up on your device.
If you are using a device with multiple users, my Xperia service can only be used by the owner.
Finding a Lost Device Using Android™ Device Manager
Google™ offers a location and security web service called Android™ Device Manager.
You can use it in parallel with, or as an alternative to, the Protection by my Xperia service.
If you lose your device, you can use Android™ Device Manager to:
•
Find and show where your device is located.
•
Ring or lock your device, erase everything on it, or add a phone number to the
lockscreen.
For additional information about Android™ Device Manager, go to
www.support.google.com
Android™ Device Manager does not work if your device is turned off or if it does not have a
connection to the internet. The Android™ Device Manager service may not be available in all
countries or regions.
To Activate Android™ Device Manager
1
If you are using a device with multiple users, be sure you are logged in as the
owner.
2
Make sure you have an active data connection and that location services are
enabled.
3
From your Homescreen, tap
4
Find and tap Settings > Google > Security.
5
Drag the sliders beside Remotely locate this device and Allow remote lock and
to the On position.
erase
6
If prompted, agree to the terms and conditions by tapping Activate.
7
To verify that Android™ Device Manager can locate your device after you activate
the service, go to
When your device is on and left idle for a set period of time, the screen darkens to save
battery power and locks automatically. This lock prevents unwanted actions on the
touchscreen when you are not using it. When you buy your device, a basic screen swipe
lock is already set. This means you have to swipe upward on the screen to unlock it. You
can change the security settings later and add other kinds of locks. See
the 10 page.
To activate the screen
•
Briefly press the power key .
To lock the screen
•
When the screen is active, briefly press the power key
.
Screen Lock
Home screen
The Homescreen is the starting point for using your device. It's similar to the desktop on
a computer screen. Your Home screen can have up to seven panes, which extend
beyond the regular screen display width. The number of Home screen panes is
represented by a series of dots at the lower part of the Home screen. The highlighted dot
shows the pane that you are currently in.
on
To go to the Home screen
•
Press .
To browse the Home screen
Home screen panes
You can add new panes to your Home screen (up to a maximum of seven panes) and
delete panes. You can also set the pane that you want to use as the main Home screen
pane.
Touch and hold any area on your Homescreen until the device vibrates.
2
Flick left or right to browse to the pane you want to set as your main Homescreen
pane, and then tap
To add a pane to your Homescreen
1
Touch and hold an empty area on your Homescreen until the device vibrates.
2
To browse the panes, flick all the way to the right or left, then tap
To Delete a Pane from your Homescreen
1
Touch and hold any area on your Homescreen until the device vibrates.
2
Flick left or right to browse to the pane you want to delete, then tap in the topright corner of the pane.
in the top-left corner.
.
Homescreen Settings
You can use the Settings shortcut to adjust some basic Homescreen settings. For
example, you can adjust the size of icons on your Homescreen.
To Set your Homescreen to Auto Rotate
1
Touch and hold an empty area on your Homescreen until the device vibrates, and
then tap Settings.
2
Drag the slider beside
To Adjust the Size of Icons on your Homescreen
1
Touch and hold an empty area on your Homescreen until the device vibrates, and
then tap Settings.
2
Tap
Icon size
, and then select an option.
Auto rotation
to the On position.
Application screen
The Application screen, which you open from the Homescreen, contains the applications
that come pre-installed on your device as well as applications that you download.
To view all applications on the Application screen
1
From your Home screen, tap .
2
Flick left or right on the Application screen.
To open an application from the Application screen
•
Flick left or right to find the application, then tap the application.
To Search for an Application from the Application Screen
1
When the Application screen is open, tap Search applications.
2
Enter the name of the application you want to search for.
To Arrange Applications on the Application Screen
1
When the Application screen is open, tap .
2
Tap Sort apps, then select an option.
To add an application shortcut to the Home screen
1
On the Application screen, touch and hold an application icon until it becomes
selected, then drag the icon to the top of the screen. The Home screen opens.
2
Drag the icon to the desired location on the Home screen, then release your finger.
To Move an Application on the Application Screen
1
When the Application screen is open, tap
2
Make sure Own order is selected under Sort apps.
3
Touch and hold the application until it becomes selected, then drag it to the new
.
location.
To Uninstall an Application from the Application Screen
1
Touch and hold any area on the Application screen until the device vibrates. All
applications that can be uninstalled are then indicated by
2
Select the application you want to uninstall, and then tap
.
Delete
.
Navigating Applications
You can navigate between applications using the navigation keys, the favorites bar, and
the recently used applications window, which lets you switch easily between all recently
used applications. The navigation keys are the Home key, the Recent apps key, and the
Back key. Some applications get closed when you press the Home key
others are paused or continue to run in the background. If an application is paused or
running in the background, you can continue where you left off the next time you open
the application.
1Recently used applications window – Open a recently used application
to exit, while
2Favorites bar – Use a shortcut to access applications or widgets
3Recent apps key – Open the recently used applications window and the favorites bar
4Home key – Exit an application and go back to the Homescreen
5Back key – Go back to the previous screen within an application or close the application
Widgets are small applications that you can use directly on your Homescreen. They also
function as shortcuts. For example, the Weather widget allows you to see basic weather
information directly on your Homescreen. When you tap the widget, the full Weather
application opens. You can download additional widgets from Google Play™.
To add a widget to the Home screen
1
Touch and hold an empty area on your Homescreen until the device vibrates, then
tap Widgets.
2
Find and tap the widget that you want to add.
To resize a widget
1
Touch and hold a widget until it magnifies and the device vibrates, then release the
widget. If the widget can be resized, for example, the Calendar widget, then a
highlighted frame and resizing dots appear.
2
Drag the dots inward or outward to shrink or expand the widget.
3
To confirm the new size of the widget, tap anywhere on the Homescreen.
To move a widget
•
Touch and hold the widget until it magnifies and the device vibrates, then drag it to
the new location.
To Remove a Widget
•
Touch and hold the widget until it is selected, then drag it to Remove from home
screen
.
Shortcuts and folders
Use shortcuts and folders to manage your applications and keep your Home screen tidy.
To add an application shortcut to your Home screen
1
Touch and hold an empty area on your Homescreen.
2
In the customization menu, tap Widgets > Apps.
3
Scroll through the list of applications and select an application. The selected
application gets added to the Homescreen.
In step 3, alternatively, you can tap Widgets > Shortcuts and then select an application from
the list available. If you use this method to add shortcuts, some of the applications available
allow you to add specific functionality to the shortcut.
To Move an Item on the Homescreen
•
Touch and hold the item until it is selected, then drag the item to the new location.
To Remove an Item from the Homescreen
•
Touch and hold the item until it becomes selected, then drag the item to Remove
from home screen at the top of the screen.
To Create a Folder on the Homescreen
•
Touch and hold an application icon or a shortcut until it is selected, then drag and
drop it on top of another application icon or shortcut.
To Add Items to a Folder on the Homescreen
•
Touch and hold an item until it is selected, then drag the item to the folder.
To rename a folder on the Home screen
1
Tap the folder to open it.
2
Tap the folder's title bar to show the
3
Enter the new folder name and tap Done.
Folder name
field.
Background and Themes
You can adapt the Homescreen to your own style using wallpapers and themes.
To change your Home screen wallpaper
1
Touch and hold an empty area on your Homescreen until the device vibrates.
2
Tap Wallpapers and select an option.
To set a theme
1
Touch and hold an empty area on your Homescreen until the device vibrates.
2
Tap
Themes
3
Select an option and follow the instructions in your device.
When you change a theme, the background also changes in some applications.
.
Taking a screenshot
You can capture still images of any screen on your device as a screenshot. Screenshots
you take are automatically saved in Album.
To Take a Screenshot
1
Press and hold down the power key until a prompt window appears.
2
Tap .
You can also take a screenshot by pressing and holding down the power key and volume
down key at the same time. Once the screenshot is captured, you can release the keys.
Drag the status bar fully downward, and then tap the screenshot you want to view.
You can also view your screenshots in the Album application.
Notifications
Notifications inform you of events such as new messages and calendar notifications as
well as activities in progress, such as file downloads. Notifications appear in the following
places:
•
The status bar
•
The Notification panel
•
The lockscreen
To open or close the Notification panel
1
To open the Notification panel, drag the status bar downward.
2
To close the Notification panel, drag the panel upward.
To Take Action on a Notification in the Notification Panel
•
Tap the notification.
To dismiss a notification from the Notification panel
•
Place your finger on a notification and flick left or right.
To Expand a Notification on the Notification Panel
•
Drag the notification downward.
Not all
notifications are expandable.
To Clear All Notifications from the Notification Panel
•
Tap .
To Take Action on a Notification from the Lockscreen
•
Double-tap the notification.
To dismiss a notification from the lockscreen
•
Place your finger on the notification and flick left or right.
You can set up your device so that only selected notifications get displayed on your
lockscreen. You can make all notifications and their content accessible, hide sensitive
content for all notifications or specific apps, or choose not to show any notifications at
all.
To Select the Notifications to Display on the Lockscreen
1
From your Homescreen, tap
2
Find and tap Settings > Sound & notification > When device is locked.
3
Select an option.
.
Notification Display Options on the Lockscreen
Show all notification
content
Hide sensitive
notification content
Don't show
notifications at all
Get all notifications on the lockscreen. When you have this setting turned on, keep in
mind that all content (including the content of incoming email and chat messages) will
be visible on your lockscreen unless you designate the relevant apps as Hide sensitivecontent in the App notifications settings menu.
You must have a PIN, password, or pattern set up as your screen lock in order for this
setting to be available. Contents hidden is displayed on the lockscreen when sensitive
notifications arrive. For example, you'll get a notification for an incoming email or chat,
but the content won't be visible on your lockscreen.
You won't get any notifications on the lockscreen.
Setting the Notification Level for an App
You can set different notification behaviors for individual applications. For example, you
can block all email notifications, prioritize Facebook™ notifications, and make the
content of messaging notifications invisible on the lockscreen.
To Set the Notification Level for an App
1
From your Homescreen, tap .
2
Find and tap Settings > Sound & notification > App notifications.
3
Select the app you want to change the notification settings for.
4
Drag the relevant slider to the right.
Notification levels and options for specific applications
Block all
Treat as priority
Allow peeking
Never show notifications for the selected app.
Receive the selected app’s notifications when Do not disturb is set to Priority only.
Let the selected app emphasis certain notifications by sliding them briefly into view on the
current screen.
Notification Light
The notification light informs you about battery status and some other events. The
notification light is enabled by default but can be disabled manually.
When the
such as when the battery level falls below 15 percent.
To Enable the Notification Light
1
From your Homescreen, tap .
2
Find and tap Settings > Sound & notification.
3
Drag the slider beside Notification light to the right.
notification light is disabled, it only lights up when there is a battery status warning,
Use the Calendar application to keep track of events and manage your
appointments.
Use the Camera application to take photos and record video clips.
Use the Contacts application to manage phone numbers, email addresses, and
other information related to your contacts.
Use the Downloads application to access your browser’s download history.
Use the Email application to send and receive email through both private and
corporate accounts.
Use the Facebook™ application to engage in social networking with friends,
family members, and co-workers around the world.
Use the FM radio application to browse and listen to FM radio stations.
Use the Album application to view, edit, and share your photos and videos.
Use the Gmail™ application to read, write, and organize email messages.
Use the Google™ application to search your device and the web.
Use the Google Maps™ application to view your current location, find other
locations and places, and calculate routes.
Use the Play Store™ application to download free and paid applications for your
device.
Use the Video application to play videos on your device and share content with
your friends.
Use the Music application to organize and play music, audio books, and
podcasts.
Use the News & Weather application to read news and check the weather
forecast.
Use the Settings application to customize your phone’s settings.
Use the Hangouts™ application to chat with friends online.
Use the TrackID™ application to identify music tracks you hear playing in your
surroundings, and to get artist, album, and other info.
Use the YouTube™ application to share and view videos from around the world.
Use the Backup and restore application to back up or restore content on your
device, such as contacts, bookmarks, calendar data, etc.
Use the Smart Connect™ application to set what happens in your device when
you connect or disconnect an accessory.
The Xperia® Movie Creator automatically creates short videos around 30
seconds long using existing photos and videos. The application automatically
determines the timeline to create its movie.
Use the Lifelog application to automatically log events about your daily life. For
example, you can set goals and track your progress in achieving them, or
bookmark special moments.
Use the Support application to access user support on your device. For
example, you can access a User guide, troubleshooting information, plus tips
and tricks.
Some applications are not supported or listed by all service providers in all areas.
Always use an original Sony charger and USB cable intended for your specific Xperia™ model.
Other chargers and cables may increase charging time, not charge at all, or may even damage
your device. Make sure all USB ports and connectors are completely dry, before inserting the
USB cable.
A wall socket charger will charge your device faster than charging via your computer. You
can still use your device while charging.
If the battery is depleted, it may take up to 30 minutes for your device to respond to the
charging. During this time, the screen may remain completely dark, not showing the
charging icon. Also note that it can take up to 4 hours for a completely drained battery to
charge fully.
Your device has an embedded, rechargeable battery that can only be replaced by an
authorized Sony repair center. You should never try to open or take apart the device yourself.
Doing so can cause damage and void your warranty.
To charge your device
1
Plug the charger into a power outlet.
2
Plug one end of the USB cable into the charger (or into the USB port of a
computer).
3
Plug the other end of the cable into the micro USB port on your device, with the
USB symbol facing up. The notification light illuminates when charging begins.
4
When the device is fully charged, disconnect the cable from your device by pulling
it straight outward. Make sure not to bend the connector.
If the battery is completely discharged, it may take a few minutes before the
illuminates and the charging icon appears.
notification light
Battery notification light status
GreenThe battery is charging and the battery charge level is greater than 90%
RedThe battery is charging and the battery charge level is less than 15%
OrangeThe battery is charging and the battery charge level is less than 90%