Sony XCG-H280CR, XCG-H280E Brochure
XCG-H280E
XCG-H280CR
Digital Video Cameras
Sony is expanding its popular XCG GigE camera series with
the introduction of two new high-quality cameras. The new
XCG-H280E (monochrome) and XCG-H280CR (color)
incorporate a 2/3-type EXview HAD CCD II™ sensor which
provides high sensitivity with a full-HD high frame rate
image-transfer capability with 8-, 10-, or 12-bit video data
output. In addition to inheriting some of the unique features of
Sony’s XCD Series such as Bulk Trigger and Sequential Trigger
modes, the XCG-H280E and XCG-H280CR support useful
features for ITS (Intelligent Traffic Systems) applications
such as Chunk Data and Auto Exposure.
The XCG-H280E and XCG-H280CR incorporate the GigE Vision
standard, based on Gigabit Ethernet technology. In response to the growing
demand for large-scale systems, this interface enables each camera to transfer
a large amount of data over long distances. The use of an Ethernet cable and
the availability of a wide variety of peripheral devices contribute to significant
cost-cutting benefits when designing a complete vision system.
By utilizing the features and benefits of GigE Vision, XCG-H280E and
XCG-H280CR cameras are ideally suited to the demanding requirements of
ITS and machine-vision applications.
®
interface
XCG-H280E
XCG-H280CR
KEY FEATURES
GigE Vision Interface
The adoption of GigE Vision® Version 1.2 adds to the outstanding
value and performance of XCG-H280E and XCG-H280CR cameras.
Being GenICam-compatible, the XCG-H280E and XCG-H280CR are
easy to integrate, thanks to a host of commercially available
image-processing libraries.
High Frame Rate Image Transfer
The XCG-H280E and XCG-H280CR feature a high readout rate of
uncompressed images for smooth and clear results. This also enables
these cameras to capture fast-moving objects without sacrificing
image quality.
Resolution
1,920 (H) x 1,080 (V)
(16:9, default)
1,920 (H) x 1,440 (V)
(4:3)
*1 Approx. value in free run mode
*2 Readout mode of image sensor
*3 Frame rate of image sensor. Some image data may not be transferred when
the frame rate exceeds transmission capacity.
2ch*2 (default) 4ch*
Frame rate*
32fps 64fps*
26fps 52fps*
Image Buffer
The XCG-H280E and XCG-H280CR are equipped with an image buffer
which serves as temporary storage for captured images for later
transmission or retransmission. This function allows users to maximize
bandwidth in multiple-camera operations or reconfirm specific images
as required.
1
2
3
3
High Sensitivity
Utilizing Sony’s latest EXview HAD CCD II technology enables the XCG-H280E
monochrome camera to capture clear images in lowlight environments.
When used with an infrared strobe, the XCG-H280E’s high sensitivity in the
near-infrared wavelength delivers outstanding picture quality.
Bulk Trigger Mode & Sequential Trigger Mode
In addition to conventional Trigger modes, XCG-H280E and
XCG-H280CR cameras feature advanced Bulk Trigger and Sequential
Trigger modes. Each camera supports 16 memory channels that can
store up to 16 different camera setups (exposure, gain, LUT).
Bulk Trigger mode allows these cameras to capture up to 16 images in
rapid succession using a single software or hardware trigger.
Sequential Trigger mode allows each camera to capture a single image
using successive setups stored in the memory channels with each
software or hardware trigger.
Chunk Data
XCG-H280E and XCG-H280CR cameras feature metadata readout over
Ethernet. The metadata includes Trigger Counter, Offset X, Y, Exposure
Time, and GPI Status which are useful in ITS applications.
Auto Exposure
The XCG-H280E and XCG-H280CR feature Auto Exposure which enables
these cameras to capture high-quality images under various lighting
conditions.
Low Power Consumption and Compact Design
XCG-H280E and XCG-H280CR cameras feature low power consumption
and boast a compact 2 x 2 x 2 3/8 in (50 x 50 x 57.5 mm) design.
These cameras also have the ability to operate at temperatures of up to
122°F / 50°C.
SPECIFICATIONS
Camera
Image Sensor 2/3-type progressive scan IT CCD 2/3-type progressive scan IT CCD
Image Sensor
Cell Size (H x V) 4.54 µm x 4.54 µm 4.54 µm x 4.54 µm
Output Pixels (H x V) 1,920 x 1,080 1,920 x 1,080
Output Pixels (H x V, Full Resolution) 1,920 x 1,440 1,920 x 1,440
Color Filter – Elementary color mosaic
Frame Rate 32 fps @ 1,920 (H) x 1,080 (V), 2ch 32 fps @ 1,920 (H) x 1,080 (V), 2ch
Minimum Illumination (50%) 0.5 lx (Iris: F1.4, Gain: +18 dB, Shutter: 1/32 s) 6 lx (Iris: F1.4, Gain: +18 dB, Shutter: 1/32 s)
Sensitivity F8 (400 lx, Gain: 0 dB) F8 (2000 lx, Gain: 0 dB)
S/N Ratio 1 step (Lens close, Gain: 0 dB, 8 bits) 1 step (Lens close, Gain: 0 dB, 8 bits)
Gain Auto, Manual : 0 dB to +18 dB Auto, Manual : 0 dB to +18 dB
Shutter Speed 2 s to 1/100,000 s, Auto 2 s to 1/100,000 s, Auto
White Balance – One push WB, Manual
Camera Features
Readout Modes Normal, Binning (2 x 2, 1 x 2, 2 x 1), Partial scan Normal, Partial scan
Readout Features Gamma (variable), Built-in test pattern Gamma (variable), Built-in test pattern
Synchronization Hardware trigger, Software trigger Hardware trigger, Software trigger
Trigger Modes Edge detection, Pulse width detection, Bulk trigger, Sequential trigger Edge detection, Pulse width detection, Bulk trigger, Sequential trigger
Chunk Data Trigger counter, GPI status, etc. Trigger counter, GPI status, etc.
Memory Channel (Usersets) 16 channels 16 channels
User Memory 64 bytes x 16 channels 64 bytes x 16 channels
Image Buffer 16 frames 16 frames
Other Features Internal temperature sensor Internal temperature sensor
Interfaces
Video Data Output 8, 10, 12-bit, digital 8, 10, 12-bit RAW, digital
Digital Interface Gigabit Ethernet (1000BASE-T) Gigabit Ethernet (1000BASE-T)
Camera Specification GigE Vision
Digital Input/Output TTL IN (x2), TTL OUT (x2) TTL IN (x2), TTL OUT (x2)
General
Lens Mount C mount C mount
Power Requirements DC +12 V (+10.5 V to +15.0 V) DC +12 V (+10.5 V to +15.0 V)
Power Consumption 5.8 W (max.) 5.8 W (max.)
Operating Temperature 14°F to +122°F (-10°C to +50°C) 14°F to + 122°F (-10°C to +50°C)
Performance Guarantee Temperature 0°C to 40°C (32°F to 104°F) 0°C to 40°C (32°F to 104°F)
Storage Temperature -22°F to +140°F (-30°C to +60°C) -22°F to +140°F
Operating Humidity 20% to 80% (no condensation) 20% to 80% (no condensation)
Storage Humidity 20% to 95% (no condensation) 20% to 95% (no condensation)
Shock Resistance 70 G 70 G
Dimensions (W X H X D) 2 x 2 x 2 3/8 inches (50 x 50 x 57.5 mm) (excluding protrusions) 2 x 2 x 2 3/8 inches (50 x 50 x 57.5 mm) (excluding protrusions)
Weight 7.1 oz (200 g) 7.1 oz (200 g)
Regulations UL2044, FCC Class A, CE: EN55022, AS/NZ: EN55022, VCCI Class A,
Supplied Accessories Lens mount cap (1), Connector plug 2P (1), Operating instructions (1) Lens mount cap (1), Connector plug 2P (1), Operating instructions (1)
(Number of Effective Pixels, H x V)
XCG-H280E XCG-H280CR
1,940 x 1,460 1,940 x 1,460
®
Version 1.2 GigE Vision® Version 1.2
KC: KN22/KN24 Class A
UL2044, FCC Class A, CE: EN55022, AS/NZ: EN55022, VCCI Class A,
KC: KN22/KN24 Class A
PIN ASSIGNMENTS
DC IN connector
Pin No.
1 DC IN
2 GND
I/O connector
Pin No.
1 GPIO OUT (1)
2 GPIO OUT (2)
3 Trigger IN (1)
4 Trigger IN (2)
5 GPIO IN (1)
6 GPIO IN (2)
7 GND
*GPIO OUT is selectable from Exposure
output/Strobe control signal/GPIO output.
OPTIONAL ACCESSORY
Tripod Adapto
VCT-ST70I
DIMENSIONS
2-M3 DEPTH 3/16 (4)
2 (50)
1 5/8 (40)
50 (2)
40 (1 5/8)
4-M3 DEPTH 3/16 (4)
4-M3 DEPTH 3/16 (4)
7/16 (10.5)
1 1/16 (26)
7/16 (10.5)
1 1/16 (26)
2 5/8 (65.5)
2 3/8 (57.5)
2 (50)
Unit: inches (mm)
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/videocameras
IS-1247 (MK10895V1)
Reproduction in whole or in part without written permission is prohibited.
©2012 Sony Corporation. All rights reserved.
Features and specifications are subject to change without notice.
The values for mass and dimensions are approximate.
“SONY”, “make.believe” and “EXview HAD CCD II” are
registered trademarks of Sony Corporation.
All other trademarks are the property of their respective owners.
Printed in USA (1/12)
Loading...