Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has
combined leading-edge technology in audio, video, computing, and communications to provide a state-of-the-art personal
computing experience.
!
External views illustrated in this manual may look slightly different from those of your computer.
How to find specifications
Some features, options, and supplied items may not be available on your computer.
To find out about the configuration of your computer, visit the VAIO Link web site at http://www.vaio-link.com
.
4
Before Use >
Finding More about Your VAIO Computer
5
nN
Finding More about Your VAIO Computer
This section provides support information about your VAIO computer.
1. Printed Documentation
❑ Quick Start Guide — An overview of components connection, set-up information, etc.
❑ Recovery and Troubleshooting Guide
❑ Regulations, Guarantee, and Service Support
2. On-screen Documentation
❑ User Guide (This manual) — Features of your computer and information about solving common problems.
To view this on-screen guide:
1Click Start, All Programs, and VAIO Documentation.
2Open the folder for your language.
3Select the guide you want to read.
✍
You can manually browse to the user guides by going to Computer > VAIO (C:) (your C drive) > Documentation > Documentation and opening the
folder for your language.
❑ Windows Help and Support — A comprehensive resource for practical advice, tutorials, and demonstrations to help you
learn to use your computer.
To access Windows Help and Support, click Start and Help and Support, or press and hold the Microsoft Windows
key and press the F1 key.
Before Use >
Finding More about Your VAIO Computer
6
nN
3. Support Web Sites
If you have any problem with the computer, you can visit the VAIO-Link web site at http://www.vaio-link.com for
troubleshooting.
Before contacting VAIO-Link by telephone, try to solve the problem by reading the supplied documentation and visiting other
Sony web sites.
❑ For more about VAIO and becoming part of the growing VAIO community, visit the web site at http://www.club-vaio.com
❑ For online purchases, visit the web site at http://www.sonystyle-europe.com
❑ For other Sony products, visit the web site at http://www.sony.net
When you contact VAIO-Link by telephone, have the serial number of your VAIO computer ready at hand. The serial number
is located on the bottom, the back panel, or inside the battery compartment of your VAIO computer.
.
.
.
Before Use >
Ergonomic Considerations
7
nN
Ergonomic Considerations
You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt
to take account of the following ergonomic considerations for both stationary and portable environments:
❑ Position of your computer – Place the computer directly in front of you. Keep your forearms horizontal, with your wrists
in a neutral, comfortable position while using the keyboard or the pointing device. Let your upper arms hang naturally at
your sides. Take frequent breaks while using your computer. Excessive use of the computer may strain eyes, muscles, or
tendons.
❑ Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the
floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning
far backwards.
Before Use >
Ergonomic Considerations
8
nN
❑ Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye
strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display
as well.
❑ Lighting – Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect
lighting to avoid bright spots on the display. Proper lighting adds to your comfort and work efficiency.
❑ Positioning an external display – When using an external display, set the display at a comfortable viewing distance.
Make sure the display screen is at eye level or slightly lower when you are sitting in front of the monitor.
Getting Started >
Getting Started
This section describes how to get started using your VAIO computer.
❑ Locating Controls and Ports (page 10)
❑ About the Indicator Lights (page 16)
❑ Connecting a Power Source (page 17)
❑ Using the Battery Pack (page 19)
❑ Shutting Down Your Computer Safely (page 25)
❑ Using the Power Saving Modes (page 26)
❑ Updating Your Computer (page 28)
9
nN
Getting Started >
Locating Controls and Ports
Locating Controls and Ports
Take a moment to identify the controls and ports shown on the following pages.
Front
A WIRELESS switch (page 46), (page 53), (page 57)
B Built-in microphone (monaural)
C Num lock indicator (page 16)
D Caps lock indicator (page 16)
E Scroll lock indicator (page 16)
F LCD screen (page 93)
G Power button/Power indicator (page 16)
H Keyboard (page 30)
I Touch pad (page 32)
J Left button (page 32)
K Right button (page 32)
10
nN
Getting Started >
Locating Controls and Ports
A Built-in MOTION EYE camera indicator (page 16)
B Built-in MOTION EYE camera (page 33)
C Charge indicator (page 16)
D Disc drive indicator (page 16)
E WIRELESS indicator (page 16)
F SD memory card slot (page 40)
G Media Access indicator (page 16)
H "Memory Stick Duo" slot
*Your computer supports only Duo-size "Memory Stick".
*
(page 34)
11
nN
Getting Started >
Locating Controls and Ports
Back
A Air vent
12
nN
Getting Started >
Locating Controls and Ports
Right
A Network (LAN) por t (page 45)
Pull the port cover down before using the network (LAN) port.
When the port cover disengages:
The port cover may disengage if you exert pressure on it when
opening it or disconnecting a LAN cable. To attach the port
cover, align the cover with the edge (1) of the port and push the
cover down until it clicks into place.
B Monitor port (page 66)
13
nN
Getting Started >
Locating Controls and Ports
Left
A DC IN port (page 17)
B Security slot
C Hi-Speed USB (USB 2.0) ports
D Headphones jack (page 65)
*Support high-/full-/low- speeds.
*
(page 71)
14
nN
Getting Started >
Locating Controls and Ports
Bottom
A Tilt feet
Unfold the tilt feet to adjust the angle of your computer before
using the network (LAN) port and the monitor port.
When the tilt foot disengages:
The tilt foot may disengage if you exert pressure on it when
unfolding it. To attach the tilt foot, push it down while aligning the
snap-fit joint (1) with the projections (2) until it snaps into place.
B Built-in speaker (monaural)
C SIM card slot
*
(page 53)
D Battery connector (page 19)
E Air vent
*On selected models only.
15
nN
Getting Started >
About the Indicator Lights
About the Indicator Lights
Your computer is equipped with the following indicator lights:
IndicatorFunctions
Power 1Illuminates in green while the computer is on, blinks slowly in orange while the computer is in Sleep mode, and
Charge
Built-in MOTION EYE cameraIlluminates while the built-in camera is in use.
Media AccessIlluminates while data access to a memor y card, such as "Memory Stick" and an SD memory card, is in
Disc drive
Num lock
Caps lock
Scroll lock
WIRELESSIlluminates while one or more wireless options are enabled.
goes out when the computer is turned off or enters Hibernate mode.
Illuminates while the battery pack is charging. See Charging the Battery Pack (page 22) for more information.
progress. (Do not place the computer into Sleep mode or turn it off while this indicator light is lit.) When the
indicator light is unlit, the memory card is not in use.
Illuminates while data access to the built-in storage device is in progress. Do not place the computer into Sleep
mode or turn it off while this indicator light is lit.
Press the Num Lk key to activate the numeric keypad. Press it a second time to deactivate the numeric keypad.
The numeric keypad is not active when the indicator light is unlit.
Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key
while the indicator light is lit. Press the key a second time to turn off the indicator light. Normal typing resumes
when the Caps lock indicator light is turned off.
Press the Fn+Scr Lk keys to change how you scroll the display. Normal scrolling resumes when the Scroll lock
indicator light is turned off. The Scr Lk key functions differently depending on the program you are using and
does not work with all programs.
16
nN
Getting Started >
Connecting a Power Source
17
nN
Connecting a Power Source
You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer. Before using the
computer for the first time, you need to connect an AC adapter to your computer.
!
Do not use your computer without the battery pack installed as it may cause the computer to malfunction.
Using the AC Adapter
While your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
✍
Use only the supplied AC adapter for your computer.
To use the AC adapter
1Plug one end of the power cord (1) into the AC adapter (3).
2Plug the other end of the power cord into an AC outlet (2).
3Plug the cable from the AC adapter (3) into the DC IN port (4) on the computer.
!
The shape of the DC In plug varies depending on the AC adapter.
Getting Started >
Connecting a Power Source
✍
To disconnect your computer completely from AC power, unplug the AC adapter.
Make sure that the AC outlet is easily accessible.
If you do not intend to use your computer for an extended period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page
27).
18
nN
Getting Started >
Using the Battery Pack
19
nN
Using the Battery Pack
The battery pack supplied with your computer is installed on your computer and is not fully charged at the time of delivery.
!
Do not use your computer without the battery pack installed as it may cause the computer to malfunction.
Installing/Removing the Battery Pack
To install the battery pack
1Turn off the computer and close the LCD screen lid.
2Slide the battery LOCK switches (1) inward.
Getting Started >
Using the Battery Pack
20
nN
3Place the battery pack into the battery compartment until the projection (2) on either side of the battery pack fits into the
U-shaped cut (3) on either side of the battery compartment.
4Push down the circled area on the battery pack illustrated below until the battery pack clicks into place.
5Slide the battery LOCK switches outward to secure the battery pack on the computer.
Getting Started >
Using the Battery Pack
21
nN
To remove the battery pack
!
You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack
while the computer is in Sleep mode.
1Turn off the computer and close the LCD screen lid.
2Slide the battery LOCK switches (1) inward.
3Slide and hold the battery RELEASE latch (2) inward, put your fingertip underneath the tab (3) on the battery pack, and
lift the battery pack in the direction of the arrow, and then slide it away from the computer.
!
Certain rechargeable batteries do not meet Sony quality and safety standards. For safety reasons this computer only functions with genuine Sony
battery packs designed for this model. If an unauthorized battery pack is installed, the battery will not be charged and the computer will not function.
Getting Started >
Using the Battery Pack
Charging the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of delivery.
To charge the battery pack
1Install the battery pack.
2Connect the computer to a power source with the AC adapter.
The charge indicator light is on while the battery pack is charging. When the battery pack charges close to the maximum
charge level you selected with the battery charge functions, the charge indicator turns off.
Charge indicator statusMeaning
Lit in orangeThe battery pack is charging.
Blinks along with the green
power indicator
Blinks along with the orange
power indicator
Blinks fast in orangeA battery error has occurred due to a failed battery
!
Charge the battery pack as described in this manual from your first battery charge.
The battery pack is running out of power.
(Normal mode)
The battery pack is running out of power.
(Sleep mode)
pack or an unlocked battery pack.
22
nN
Getting Started >
Using the Battery Pack
✍
Keep the battery pack in your computer while it is directly connected to AC power. The battery pack continues to charge while you are using the
computer.
When the battery pack is running out of power and both the charge and power indicator lights blink, you should either connect the AC adapter to
recharge the battery pack or shut down your computer and install a fully charged battery pack.
Your computer is supplied with a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect
the life of battery.
You can extend the life of your battery pack if you enable the battery care function of the Battery Charge Functions with the VAIO Control Center.
While some software applications or peripheral devices are in use, your computer may not enter Hibernate mode even when the remaining battery life
becomes short. To avoid loss of data while the computer is running on the battery, you should save your data frequently and manually activate a power
management mode, such as Sleep or Hibernate.
If the battery pack runs out of power while the computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is
impossible. To avoid loss of data, you should save your data frequently.
23
nN
Getting Started >
Using the Battery Pack
24
nN
Extending Your Battery Life
When your computer is running on battery power, you can extend your battery life using the following methods.
❑ Decrease the LCD brightness of your computer screen.
❑ Use the power saving mode. See Using the Power Saving Modes (page 26) for more information.
❑ Change the power saving settings on the Power Options. See Using the VAIO Power Management (page 85) for more
information.
❑ Set the wallpaper in Long Battery Life Wallpaper Setting as your desktop background with the VAIO Control Center.
Getting Started >
Shutting Down Your Computer Safely
25
nN
Shutting Down Your Computer Safely
To avoid losing unsaved data, be sure to shut down your computer properly, as described below.
To shut down your computer
1Turn off any peripherals connected to the computer.
2Click Start and the Shut down button.
3Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off
automatically.
The power indicator light turns off.
Getting Started >
Using the Power Saving Modes
26
nN
Using the Power Saving Modes
You can take advantage of the power management settings to conserve battery life. In addition to the normal operating mode,
your computer has two distinct power saving modes to suit your preference: Sleep and Hibernate.
!
If you do not intend to use your computer for an extended period of time while it is disconnected from AC power, place the computer into Hibernate
mode or turn it off.
If the battery pack runs out of power while your computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is
impossible. To avoid loss of data, you should save your data frequently.
ModeDescription
Normal modeThis is the normal state of your computer while it is in use. The green power indicator light is lit while the
computer is in this mode.
Sleep modeSleep mode turns off the LCD screen and places the built-in storage device(s) and the CPU into a low power
Hibernate modeWhile your computer is in Hibernate mode, the state of the system is saved on the built-in storage device(s) and
consumption mode. The orange power indicator light blinks slowly while your computer is in this mode. Your
computer comes out of Sleep mode quicker than out of Hibernate mode. However, Sleep mode uses more
power than Hibernate mode.
power is turned off. Even when the battery pack runs out of power, no data will be lost. The power indicator light
is unlit while your computer is in this mode.
Getting Started >
Using the Power Saving Modes
Using Sleep Mode
To activate Sleep mode
Click Start, the arrow next to the Shut down button, and Sleep.
To return to Normal mode
❑ Press any key.
❑ Press the power button on your computer.
!
If you press and hold the power button for more than four seconds, your computer will turn off automatically. You will lose all unsaved data.
Using Hibernate Mode
To activate Hibernate mode
Press the Fn+F12 keys.
Alternatively, you can click Start, the arrow next to the Shut down button, and Hibernate.
!
Do not move your computer before its power indicator light turns off.
27
nN
To return to Normal mode
Press the power button.
!
If you press and hold the power button for more than four seconds, your computer will turn off automatically.
Getting Started >
Updating Your Computer
28
nN
Updating Your Computer
Be sure to install the latest updates on your computer with the following software applications so that the computer can run
more efficiently.
❑ Windows Update
Click Start, All Programs, and Windows Update and then follow the on-screen instructions.
❑ VAIO Update 4
Click Start, All Programs, VAIO Update 4, and Go to VAIO Web Support and then follow the on-screen instructions.
!
Your computer must be connected to the Internet to download the updates.
Using Your VAIO Computer >
Using Your VAIO Computer
This section describes how to get the most out of using your VAIO computer.
❑ Using the Keyboard (page 30)
❑ Using the Touch Pad (page 32)
❑ Using the Built-in Camera (page 33)
❑ Using "Memory Stick" (page 34)
❑ Using Other Modules / Memory Cards (page 40)
❑ Using the Internet (page 44)
❑ Using the Network (LAN) (page 45)
❑ Using the Wireless LAN (page 46)
❑ Using the Wireless WAN (page 53)
❑ Using the Bluetooth Function (page 57)
29
nN
Using Your VAIO Computer >
Using the Keyboard
Using the Keyboard
Your keyboard has additional keys that perform model-specific tasks.
Combinations and Functions with the Fn Key
✍
Some keyboard functions can be used only after the operating system is finished launching.
Combination/FeatureFunction
Fn + % (F2): mutingTurns on and off the built-in speakers or the headphones.
Fn + 2 (F3/F4): volume controlChanges the volume level.
Fn + 8 (F5/F6): brightness controlChanges the LCD brightness of your computer screen.
Fn + /T (F7): display output
To increase the volume, keep pressing the Fn+F4 keys or press the Fn+F4 keys and then the
M or , key.
To decrease the volume, keep pressing the Fn+F3 keys or press the Fn+F3 keys and then the
m or < key.
To increase lighting intensity, keep pressing the Fn+F6 keys or press the Fn+F6 keys and then
the M or , key.
To decrease lighting intensity, keep pressing the Fn+F5 keys or press the Fn+F5 keys and then
the m or < key.
Switches the display output between your computer screen, an external display, simultaneous
output to both, and multiple displays with both that function as a single desktop. Press the Enter
key to select the display output.
!
If you disconnect a display cable from your computer while an external display is selected as the display
output destination, the computer screen goes blank. In such a case, press the F7 key twice while holding
down the Fn key, and then press the Enter key to switch the display output to the computer screen.
30
nN
Multiple displays may not be supported depending on the operating system on your computer.
Loading...
+ 108 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.