Sony VMC-P10 User Manual

4-093-154-12 (1)

Display Interface Cable

Instructions Mode d’emploi Instrucciones

US FR ES

VMC-P10

Thank you for purchasing this product.

WARNING

If the safety precautions are not observed and the product is used incorrectly, it may result in a fire or serious injury. This instruction manual shows the important precautions necessary to prevent accidents and to promote the correct handling of the product. Be sure to read this manual thoroughly and use the product correctly. Be sure to keep this manual available for future reference.

This Display Interface Cable is designed for use with the Sony Flat Panel Color Television. Do not use this cable with equipment other than the following product.

Specified product: Flat Panel Color Television (KE-42XBR900/KE-50XBR900)

WARNING

On Safety

Products by Sony are designed with safety in mind. If the product is used incorrectly, however, it may result in serious injury through a fire, an electric shock or by causing the product to topple over. Be sure to observe the precautions for safety to prevent accidents.

Be sure to observe the safety precautions.

Be sure to thoroughly read the precautions described in “On Safety.”

Unusual situations

If unusual noise, an unusual odor, or smoke is detected

, 1 Unplug the Power Cords of the Flat-panel Display Unit and the Media

Receiver Unit from the wall outlet.

2 Consult your Sony dealer.

WARNING

If the following precautions are not observed, there is a possibility of either death or serious injury.

Keep the pin cover away from very small children.

If a small child should swallow the pin cover, it may cause suffocation or the internal injury. If a child should swallow the pin cover, immediately consult your doctor.

2 (US)

CAUTION

If the following precautions are not observed, there is a possibility that the user will suffer injury or that property damage will occur.

Do not use this product with equipment other than the specified product.

Doing so may result in a fire or an electric shock.

Be sure to connect the Display Interface Cable correctly.

If you stumble over the Display Interface Cable, the products may topple over or fall and cause injury. Be sure to connect and secure the Display Interface Cable properly to avoid these situations.

Do not connect the Display Interface Cable to other cables.

English

3 (US)

Connecting the Display Unit to the Media Receiver Unit

• Be sure to unplug the Power Cords of the Display Unit and the Media Receiver Unit before connecting the Display Unit to the Media Receiver Unit.

Black connector

Flow of signals

BLACK WHITE

Display Interface Cable

White connector

Connect the cable to the Media Receiver Unit.

Connect the Display Interface Cable to the Flat-panel Display Unit.

Install the Flat-panel Display Unit.

Install the Flat-panel Display Unit on the dedicated Wall-Mount Bracket or on the dedicated stands. (See the instruction manuals of the Wall-Mount Bracket or the dedicated stands for more information.)

Screw the knob clockwise with your fingers and tighten it until it is firmly fastened.

White connector

Display Interface Cable

Flow of signals

WHITE BLACK

DISPLAY SIGNAL OUT

Black connector

Connect the Display Interface Cable to the Media Receiver Unit.

Notes

• If you stumble over the Display Interface Cable, the products may topple over or fall and cause injury. Be sure to connect and secure the Display Interface Cable properly to avoid these situations.

• Do not use the product with a distorted connector or a damaged Display Interface Cable.

4 (US)

Precautions

Notes on use

• Do not subject the product to excessive impact or drop it.

• Do not stick any foreign objects in between the pins inside the connector of the Display Interface Cable. Do not allow any metallic objects to come in contact with the pins. This may cause a short circuit in the Flat-panel Display Unit or the Media Receiver Unit.

• Do not modify or damage the Display Interface Cable.

• Do not use the product near a heater. Do not apply heat to the product.

• Do not use the product where it is susceptible to humidity, dust, or oily smoke.

• Do not disassemble or make alterations to the product.

• Do not touch the Display Interface Cable during a thunder storm.

• Do not bend the cable by force.

• Do not allow the Display Interface Cable to be pinched under a piano or other furniture.

• Do not use the Display Interface Cable if it is damaged.

PRECAUTIONS on maintenance

•To keep the stand clean, occasionally wipe the stand with a dry soft cloth. Stubborn stains may be removed with a cloth slightly dampened with watered-down dishwashing detergent. Then wipe the area with a dry soft cloth.

• Do not use any type of chemicals, such as thinner or benzene, as they may damage the finish of the stand.

Specifications

Length of the Display Interface Cable: About 10 m (32 feet 10 3⁄4 inches) Accessories: Instruction Manual (1)

Design and specifications are subject to change without notice.

5 (US)

+ 11 hidden pages