Sony VGN-Z720D, VGN-Z720D/B, VGN-Z720Y, VGN-Z720Y/B, VGN-Z750D User Guide

User Guide

Personal Computer

VGN-Z Series

N

Contents

2

nN

Before Use.......................................................................... 4

Finding More about Your VAIO Computer .................... 5

Ergonomic Considerations ............................................ 9

Getting Started.................................................................. 11

Locating Controls and Ports........................................ 12

About the Indicator Lights ........................................... 18

Connecting a Power Source ....................................... 19

Using the Battery Pack................................................ 20

Shutting Down Your Computer Safely ........................ 28

Updating Your Computer ............................................ 29

Using Your VAIO Computer.............................................. 30

Using the Keyboard..................................................... 31

Using the Touch Pad................................................... 33

Using Special-function Buttons ................................... 34

Using the Built-in Camera ........................................... 35

Using the Optical Disc Drive ....................................... 36

Using the Memory Stick .............................................. 43

Using Other Modules / Memory Cards ........................ 48

Using the Internet ........................................................ 54

Using the Network (LAN) ............................................ 56

Using the Wireless LAN .............................................. 57

Using the Bluetooth Function ...................................... 61

Using Fingerprint Authentication .................................66

Using the TPM .............................................................73

Using Peripheral Devices..................................................82

Connecting a Docking Station .....................................83

Connecting External Speakers or Headphones ..........91

Connecting an External Display ..................................92

Selecting Display Modes ...........................................101

Using the Multiple Monitors Function ........................103

Connecting an External Microphone .........................106

Connecting a USB Device .........................................107

Connecting an i.LINK Device.....................................109

Customizing Your VAIO Computer..................................111

Selecting Performance Modes ..................................112

Setting the Password.................................................114

Using the VAIO Control Center .................................126

Using the Power Saving Modes ................................127

Using the VAIO Power Management.........................132

Protecting the Hard Disk ............................................134

Upgrading Your VAIO Computer.....................................135

Adding and Removing Memory .................................136

3

nN

Precautions..................................................................... 141

Handling the LCD Screen ......................................... 142

Using the Power Source ........................................... 143

Handling Your Computer........................................... 144

Handling the Built-in Camera .................................... 147

Handling Discs .......................................................... 148

Using the Battery Pack.............................................. 149

Using Headphones.................................................... 151

Handling the Memory Stick ....................................... 152

Handling the Built-in Storage Device ........................ 153

Using Fingerprint Authentication ............................... 154

Using the TPM .......................................................... 155

Troubleshooting .............................................................. 156

Computer .................................................................. 158

System Security ........................................................ 166

Battery....................................................................... 167

Built-in Camera ......................................................... 169

Internet ...................................................................... 171

Networking ................................................................ 173

Bluetooth Technology ............................................... 176

Optical Discs ............................................................. 180

Display ...................................................................... 184

Printing ...................................................................... 189

Microphone ............................................................... 190

Speakers ...................................................................191

Touch Pad .................................................................192

Keyboard ...................................................................193

Floppy Disks ..............................................................194

Audio/Video ...............................................................195

Memory Stick .............................................................199

Peripherals ................................................................200

Docking Station .........................................................201

Trademarks .....................................................................202

Notice ..............................................................................204

Before Use >

nN

Before Use

Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has
combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal
computing experience.

!

External views illustrated in this manual may look slightly different from those of your computer.

Information in the supplied manuals including this User Guide is intended for users of the VAIO computers with the Microsoft® Windows Vista®
32-bit operating system. You may find differences in the information when your computer comes preinstalled with the 64-bit operating system.

How to find specifications

Some features, options, and supplied items may not be available on your computer.

To find out about the configuration of your computer, visit the Sony online support web sites at the following URLs:

❑ For customers in USA

http://esupport.sony.com/EN/VAIO/

❑ For customers in Canada

http://www.sony.ca/support/

❑ For customers in Spanish-speaking Latin American countries or areas

http://esupport.sony.com/LA/

❑ For customers in Brazil

http://esupport.sony.com/BR/

4

Before Use >
Finding More about Your VAIO Computer

Finding More about Your VAIO Computer

This section provides support information about your VAIO computer.

1. Printed Documentation

❑ Quick Start Guide — An overview of components connection, set-up information, etc.

❑ Safety Information — Safety guidelines and owner information.

2. On-screen Documentation

❑ Help and Support — General information and technical assistance for your VAIO computer.

To access Help and Support:

1 Click Start and Help and Support.

2 Choose from the following categories to find the answers you need.

5

nN

Get started with my VAIO Get help with Internet and wireless setup, security setup, personalizing your VAIO computer, and creating

Use my VAIO Access interactive help in the form of VAIO tutorials, how-to articles, the VAIO technology page,

Troubleshoot my VAIO Maintain and troubleshoot your VAIO computer with VAIO Care, system restore, backup and recovery, and

recovery discs and more.

specifications, and system and software information.
You can find useful documentation such as below:

- VAIO User Guide (This manual)

- VAIO Recovery Center User Guide - Information about restoring individual software programs,
hardware drivers, and drive partition(s) or your entire built-in storage device to the original factory settings

- Software Information

contact Sony support.

Before Use >
Finding More about Your VAIO Computer

6

nN

❑ Program help files — May be included with the preinstalled programs on your computer. You may be able to access the

help files from the help menu on a specific program.

™

❑ SmartWi

Connection Utility Help (Selected models only) — Information about setting up Bluetooth®, wireless LAN,

GPS, and wireless WAN functions.

Features and options may not be available on your computer.
See the specifications to find out about configuration of your computer.

To access this on-screen guide:

1 Click Start, All Programs, and SmartWi Connection Utility.

2 Click SmartWi Connection Utility Help.

Before Use >
Finding More about Your VAIO Computer

3. Support Web Sites

❑ Sony online support web site

The Sony online support web site provides instant access to information on commonly encountered problems. Type a
description of the problem and the Knowledge Database searches for the corresponding solutions online.

❑ For customers in USA

http://esupport.sony.com/EN/VAIO/

❑ For customers in Canada

http://www.sony.ca/support/

❑ For customers in Spanish-speaking Latin American countries or areas

http://esupport.sony.com/LA/

❑ For customers in Brazil

http://esupport.sony.com/BR/

❑ Operating system online support web site

Your computer comes preinstalled with a Microsoft Windows operating system. For operating system support, you can
visit Microsoft customer support at http://support.microsoft.com/directory/

.

7

nN

Before Use >
Finding More about Your VAIO Computer

8

nN

4. Customer Information Center

If you do not find the information you are looking for at our site, you may call Sony directly. You can find the contact numbers
on the Sony online support web site. In order to receive the fastest and most efficient services, have the following information
readily available:

1 Your VAIO computer model

You can find it at the lower right corner of the display on the computer.

2 Your computer's serial number

You can find it on the bottom, the back panel, or inside the battery compartment of your Sony VAIO computer. The serial
number is the last 7 digits of the number below the barcode.

3 The operating system on your computer

4 The hardware component or the software program that is causing the problem

5 A brief description of the problem

5. In Store Service & Support (available in USA only)

Make an appointment with a Sony certified technician at a U.S. Sony Style store and get personalized service and support
for your VAIO PC. Sony Style Backstage Technicians can assist with the set up of your new VAIO PC, system optimization,
data rescue, and any repair service you might need.
Visit the web site at www.sonystyle.com/backstage

to find the nearest location.

Before Use >
Ergonomic Considerations

9

nN

Ergonomic Considerations

You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt
to take account of the following ergonomic considerations for both stationary and portable environments:

❑ Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your

wrists in a neutral, comfortable position (3) while using the keyboard or the pointing device. Let your upper arms hang
naturally at your sides. Take frequent breaks while using your computer. Excessive use of the computer may strain eyes,
muscles, or tendons.

❑ Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the

floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning
far backwards.

Before Use >
Ergonomic Considerations

10

nN

❑ Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye

strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display
as well.

❑ Lighting – Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect

lighting to avoid bright spots on the display. Proper lighting adds to your comfort and work efficiency.

❑ Positioning an external display – When using an external display, set the display at a comfortable viewing distance.

Make sure the display screen is at eye level or slightly lower when you are sitting in front of the monitor.

Getting Started >

Getting Started

This section describes how to get started using your VAIO computer.

!

Before starting your computer for the first time, do not connect any other hardware that did not originally come with your computer. Be sure to start
up your computer with only the supplied accessories connected and set up your system. Upon completion, connect one device (for example, a printer,
an external hard disk drive, a scanner, and so on) at a time, following the manufacturers' instructions.

❑ Locating Controls and Ports (page 12)

❑ About the Indicator Lights (page 18)

❑ Connecting a Power Source (page 19)

❑ Using the Battery Pack (page 20)

❑ Shutting Down Your Computer Safely (page 28)

❑ Updating Your Computer (page 29)

11

nN

Getting Started >
Locating Controls and Ports

Locating Controls and Ports

Take a moment to identify the controls and ports shown on the following pages.

!

The appearance of your computer may be different from those illustrated in this manual due to variations in specifications. It may also vary in some
countries or areas.

Front

A Built-in MOTION EYE camera (page 35)
B Built-in MOTION EYE camera indicator (page 18)
C Num lock indicator (page 18)
D Caps lock indicator (page 18)
E Scroll lock indicator (page 18)
F LCD screen (page 142)
G Built-in speakers (stereo)
H Keyboard (page 31)
I Touch pad (page 33)
J Fingerprint sensor (page 66)

12

nN

Getting Started >
Locating Controls and Ports

13

nN

A STAMINA mode indicator (page 18)
B Performance selector switch (page 112)
C SPEED mode indicator (page 18)
D S1/S2 buttons (page 34)
E Drive eject button (page 34)
F Charge indicator (page 18)
G Disc drive indicator (page 18)
H Media Access indicator (page 18)
I WIRELESS indicator (page 18)
J SD memory card slot (page 50)

K Memory Stick slot

*

(page 43)

L WIRELESS switch (page 57), (page 61)
M Built-in microphone (monaural)

* Your computer supports both the standard-size Memory Stick and the Duo-

size Memory Stick.

Getting Started >
Locating Controls and Ports

Back

14

nN

A SIM card slot
B Battery connector (page 20)

* On selected models only.

*

Getting Started >
Locating Controls and Ports

Right

A Optical disc drive (page 36)
B Optical disc drive indicator (page 18)
C Manual eject hole (page 180)
D Substitute drive eject button (page 36)

E HDMI output port
F Hi-Speed USB (USB 2.0) port
G Monitor port

*1

*3

(page 93)

(page 97)

*2

(page 107)

H Power button/Power indicator (page 18)

*1

Functional only when your computer is in SPEED mode.

*2

Supports high-/full-/low- speeds.

*3

Not accessible when your computer is attached to the docking station.

15

nN

Getting Started >
Locating Controls and Ports

Left

A DC IN port (page 19)
B Network (Ethernet) port (page 56)
C Air vent

D ExpressCard/34
E Security slot
F Modem port (page 54)

G Hi-Speed USB (USB 2.0) port
H i.LINK 4-pin (S400) port (page 109)
I Microphone jack (page 106)
J Headphones jack (page 91)

* Supports high-/full-/low- speeds.

slot (page 48)

*

(page 107)

16

nN

Getting Started >
Locating Controls and Ports

Bottom

A Docking station connector (page 85)
B Air vents
C Memory module compartment cover (page 136)

17

nN

Getting Started >
About the Indicator Lights

About the Indicator Lights

Your computer is equipped with the following indicator lights:

Indicator Functions

Power 1 Illuminates in green when the computer is on, blinks slowly in orange while the computer is in Sleep mode, and

Charge

Media Access Illuminates while data is being read from or written to a memory card, such as the Memory Stick and the SD

Built-in MOTION EYE camera Illuminates while the built-in camera is in use.

STAMINA mode Illuminates while the computer is in STAMINA mode to conserve battery power.

SPEED mode Illuminates while the computer is in SPEED mode to provide faster performance.

Optical disc drive Illuminates while the drive is reading or writing data. When the indicator is unlit, the optical disc media is not in

Disc drive

Num lock

Caps lock

Scroll lock

WIRELESS Illuminates when one or more wireless options are enabled.

turns off when the computer is off or in Hibernate mode.

Illuminates while the battery pack is charging. See Charging the Battery Pack (page 23) for more information.

memory card. (Do not place the computer into Sleep mode or turn it off when this indicator is lit.) When the
indicator is unlit, the memory card is not in use.

use.

Illuminates while the built-in storage device or the optical disc drive is running to read or write data.
Do not place the computer into Sleep mode or turn it off when this indicator is lit.

Press the Num Lk key to activate the numeric keypad. Press it a second time to deactivate the numeric keypad.
The numeric keypad is not active when the indicator is unlit.

Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key
while the indicator is lit. Press the key a second time to turn off the indicator. Normal typing resumes when the
Caps lock indicator is unlit.

Press the Fn+Scr Lk keys to change how you scroll the display. Normal scrolling resumes when the Scroll lock
indicator is unlit. The Scr Lk key functions differently depending on the program you are using and does not
work with all programs.

18

nN

Getting Started >
Connecting a Power Source

19

nN

Connecting a Power Source

You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer.

Using the AC Adapter

✍

Use only the supplied AC adapter for your computer.

To use the AC adapter

1 Plug one end of the power cord (1) into the AC adapter (3).

2 Plug the other end of the power cord into an AC outlet (2).

3 Plug the cable connected to the AC adapter (3) into the DC IN port (4) on the computer or on the optional docking station.

!

The shape of the DC In plug varies depending on the AC adapter.

✍

To disconnect your computer completely from AC power, unplug the AC adapter.

Make sure that the AC outlet is easily accessible.

If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page 130).

Getting Started >
Using the Battery Pack

Using the Battery Pack

The battery pack supplied with your computer is not fully charged at the time of delivery.

Installing the Battery Pack

To install the battery pack

1 Turn off the computer and close the LCD screen lid.

2 Slide the battery LOCK switch (1) inward.

20

nN

Getting Started >
Using the Battery Pack

nN

3 Slide the battery pack diagonally into the battery compartment until the projections (2) on either side of the battery

compartment fit into the U-shaped cuts (3) on either side of the battery pack.

21

Getting Started >
Using the Battery Pack

4 Push the battery pack down into the compartment until it clicks into place.

5 Slide the battery LOCK switch outward to secure the battery pack on the computer.

✍

When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.

!

This computer is designed to operate only with genuine Sony battery packs.

22

nN

Getting Started >
Using the Battery Pack

Charging the Battery Pack

The battery pack supplied with your computer is not fully charged at the time of delivery.

To charge the battery pack

1 Install the battery pack.

2 Connect the computer to a power source with the AC adapter.

The charge indicator light turns on while the battery pack is charging. When the battery pack charges close to the
maximum charge level you selected with the battery charge functions, the charge indicator turns off. To select your desired
maximum charge level, see Using the Battery Charge Functions (page 25).

Charge indicator status Meaning

Lit in orange The battery pack is charging.

Blinks along with the green power
indicator

Blinks along with the orange power
indicator

Blinks fast in orange A battery error has occurred due to a failed battery

The battery pack is running out of power. (Normal
mode)

The battery pack is running out of power. (Sleep mode)

pack or an unlocked battery pack.

23

nN

!

Charge the battery pack as described in this manual from your first battery charge.

Getting Started >
Using the Battery Pack

✍

Keep the battery pack in your computer while it is directly connected to AC power. The battery pack continues to charge while you are using the
computer.

If the battery charge level falls below 10%, you should either connect the AC adapter to recharge the battery pack or shut down your computer and
install a fully charged battery pack.

Your computer is supplied with a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect
the life of battery.

While some software applications or peripheral devices are in use, your computer may not enter Hibernate mode even when the remaining battery life
is short. To avoid loss of data when using battery power, you should save your data frequently and manually activate a power management mode, such

as Sleep or Hibernate.

If the battery pack wears out when the computer enters Sleep mode, you will lose all unsaved data. Going back to the previous work state is impossible.
To avoid loss of data, you should save your data frequently.

When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.

24

nN

Getting Started >
Using the Battery Pack

25

nN

Using the Battery Charge Functions

You can customize the current battery charging method using the Battery Charge Functions. To make the life of battery
longer, enable the battery care function.

To enable the battery care function

1 Click Start, All Programs, and VAIO Control Center.

2 Click Power Management and then Battery Charge Functions.

3 Click Advanced.

4 Click to select the Enable Battery Care Function check box.

5 Select the desired maximum charge level.

6 Click OK.

To check the battery charge capacity

Follow steps 1 to 3 in To enable the battery care function above and check detailed information. If the battery charge
capacity is low, replace the battery pack with a new genuine Sony battery pack.

Getting Started >
Using the Battery Pack

Using the Battery Life Conserving Wallpaper

You can conserve your battery life just by setting the specific wallpaper as your desktop background.

To set the battery life conserving wallpaper

1 Click Start, All Programs, and VAIO Control Center.

2 Click Display and then Long Battery Life Wallpaper Setting.

3 Click Set Long Battery Life Wallpaper.

At the confirmation prompt, click OK.

26

nN

Getting Started >
Using the Battery Pack

27

nN

Removing the Battery Pack

!

You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack
while the computer is in Sleep mode.

To remove the battery pack

1 Turn off the computer and close the LCD screen lid.

2 Slide the battery LOCK switch (1) inward.

3 Slide and hold the battery RELEASE latch (2) inward, put your fingertip underneath the tab (3) on the battery pack, and

lift the battery pack in the direction of the arrow, and then slide it away from the computer.

Getting Started >
Shutting Down Your Computer Safely

28

nN

Shutting Down Your Computer Safely

To avoid losing unsaved data, be sure to shut down your computer properly, as described below.

To shut down your computer

1 Turn off any peripherals connected to the computer.

2 Click Start, the arrow next to the Lock button, and then Shut Down.

3 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off

automatically.
The power indicator light turns off.

Getting Started >
Updating Your Computer

29

nN

Updating Your Computer

Be sure to install the latest updates on your computer with the following software applications so that the computer can run
more efficiently.

❑ Windows Update

Click Start, All Programs, and Windows Update and then follow the on-screen instructions.

❑ VAIO Update 4

Click Start, All Programs, VAIO Update 4, and Go to VAIO Web Support and then follow the on-screen instructions.

!

Your computer must be connected to the Internet to download the updates.

Using Your VAIO Computer >

Using Your VAIO Computer

This section describes how to get the most out of using your VAIO computer.

❑ Using the Keyboard (page 31)

❑ Using the Touch Pad (page 33)

❑ Using Special-function Buttons (page 34)

❑ Using the Built-in Camera (page 35)

❑ Using the Optical Disc Drive (page 36)

❑ Using the Memory Stick (page 43)

❑ Using Other Modules / Memory Cards (page 48)

❑ Using the Internet (page 54)

❑ Using the Network (LAN) (page 56)

❑ Using the Wireless LAN (page 57)

❑ Using the Bluetooth Function (page 61)

❑ Using Fingerprint Authentication (page 66)

❑ Using the TPM (page 73)

30

nN

Using Your VAIO Computer >
Using the Keyboard

Using the Keyboard

Your keyboard has additional keys that perform model-specific tasks.

Combinations and Functions with the Fn Key

✍

Some keyboard functions can be used only after the operating system is finished launching.

Combinations/Feature Functions

Fn + % (F2): speaker switch Turns on and off the built-in speakers and the headphones.

Fn + 2 (F3/F4): volume Changes the volume level.

Fn + 8 (F5/F6): brightness control Changes the LCD brightness of your computer screen.

Fn + /T (F7): display output

Fn + / (F9/F10): zoom

To increase the volume, press the Fn+F4 keys and then the M or , key, or keep pressing the
Fn+F4 keys.
To decrease the volume, press the Fn+F3 keys and then the m or < key, or keep pressing the
Fn+F3 keys.

To increase lighting intensity, keep pressing the Fn+F6 keys or press the Fn+F6 keys and then
the M or , key.
To decrease lighting intensity, keep pressing the Fn+F5 keys or press the Fn+F5 keys and then
the m or < key.

Toggles among your computer screen, an external display, and simultaneous output to both.

Changes the size of an image or a document displayed on some software.
To make the view look smaller and further away (zoom out), press the Fn+F9 keys.
To make the view look bigger and closer (zoom in), press the Fn+F10 keys.
See the help file included with the VAIO Control Center for more information.

31

nN

Using Your VAIO Computer >
Using the Keyboard

Combinations/Feature Functions

Fn + (F12): hibernate

32

nN

Provides the lowest level of power consumption. When you execute this command, the states
of the system and the connected peripheral devices are saved to the built-in storage device and
the system power is turned off. To return the system to its original state, use the power button
to turn on the power.
For details on power management, see Using the Power Saving Modes (page 127).

Using Your VAIO Computer >
Using the Touch Pad

Using the Touch Pad

You can point to, select, drag, and scroll objects on the screen using the touch pad.

Action Description

Point Slide your finger on the touch pad (1) to place the pointer (2) on an item or object.

Click Press the left button (3) once.

Double-click Press the left button twice in a row.

Right-click Press the right button (4) once. In many applications, this action displays a shortcut menu.

Drag Slide your finger on the touch pad while pressing the left button.

Scroll Slide your finger along the right edge of the touch pad to scroll vertically. Slide your finger along the bottom edge to scroll

horizontally (the scroll function is available only with applications that support a touch pad scroll feature).

✍

You can disable/enable the touch pad while a mouse is connected to your computer. To change the touch pad settings, use the VAIO Control Center.

33

nN

!

Be sure to connect a mouse before disabling the touch pad. If you disable the touch pad before connecting a mouse, you will be able to use only the
keyboard for pointer operations.

Using Your VAIO Computer >
Using Special-function Buttons

Using Special-function Buttons

Your computer is equipped with special buttons to help you use specific functions of the computer.

Special-function button Functions

S1/S2 buttons

Drive eject button

Execute the task that is assigned to each button by default.
You can change the default assignment with the VAIO Control Center.

✍

You can assign VAIO Presentation Support to the S1 button. In Presentation mode, some functions of the computer that
may disturb a presentation are disabled, such as a screen saver, the power saving modes, and system message generation.
In addition, you can use handy functions for the presentation, for example, displaying a document for quick reference and
the mirror image of the external display simultaneously on the computer. To bring the computer back into Normal mode,
press this button once again.

To change the Presentation mode settings, click Start, Control Panel, Mobile PC, and Adjust settings before giving a
presentation under Windows Mobility Center, and change the settings in the Presentation Settings window.

Ejects the optical disc drive tray.
If this button does not work, try the substitute drive eject button on the optical disc drive.

34

nN

Using Your VAIO Computer >
Using the Built-in Camera

Using the Built-in Camera

Your computer is equipped with a built-in MOTION EYE camera.

With the preinstalled image capture software, you can perform the following operations:

❑ Capturing still images and movies

❑ Sensing and capturing object movements for monitoring purposes

❑ Editing captured data

✍

Turning on the computer activates the built-in camera.

Video conference is possible with the appropriate software.

!

Launching or exiting your instant messaging or video editing software does not activate or deactivate the built-in camera.

Do not place your computer into Sleep or Hibernate mode while you are using the built-in camera.

You cannot operate the built-in camera with the Microsoft Windows Movie Maker software.

To use the preinstalled image capture software

1 Click Start, All Programs, ArcSoft WebCam Companion 2, and WebCam Companion 2.

2 Click the desired icon in the main window.

For detailed information on how to use the software, see the help file included with the software.

35

nN

✍

When capturing an image or a movie in a dark place, click the Capture icon or the Record icon in the main window, and then click the WebCam Settings
icon and select the low light or low light compensation option in the properties window.

Using Your VAIO Computer >
Using the Optical Disc Drive

Using the Optical Disc Drive

Your computer is equipped with an optical disc drive.

Features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.

To insert a disc

1 Turn on the computer.

2 Press the disc drive eject button (1) to open the drive.

The drive tray slides out.

!

If the power supply to the optical disc drive is disabled by the VAIO Power Management, it will take a while to eject the drive tray with the drive eject
button.

✍

If the drive eject button does not work, try the substitute drive eject button on the optical disc drive. The substitute drive eject button, however, is not
functional if the power supply to the optical disc drive is disabled by the VAIO Power Management.

36

nN

Using Your VAIO Computer >
Using the Optical Disc Drive

37

nN

3 Place a disc in the middle of the drive tray with the label side facing upward and gently push it down until the disc clicks

into place.

!

Do not exert pressure on the drive tray. Be sure to hold the bottom of the drive tray when placing/removing a disc onto/from the tray.

4 Close the drive tray by pushing it in gently.

!

Do not remove the optical disc when your computer is in a power saving mode (Sleep or Hibernate). Be sure to bring the computer back into Normal
mode before removing the disc.

Using Your VAIO Computer >
Using the Optical Disc Drive

Supported Disc Media

Your computer plays and records CDs, DVDs, and Blu-ray Disc™ media, depending on the model you purchased.

See the reference chart below to find out which type of optical disc drive supports which types of media.

PR: playable and recordable
P: playable but not recordable
–: not playable or recordable

CD-

Video CDMusic CDCD

ROM

DVD± RW/
±R DL/RAM

Blu-ray DiscPPPPPRPPPRPRP P PR P

Blu-ray Disc
Combo

*1

The DVD±RW/RAM disc drive on your computer does not support the DVD-RAM cartridge. Use non-cartridge discs or discs with a removable cartridge.

*2

Writing data to single-sided DVD-RAM discs (2.6 GB) compliant with DVD-RAM Version 1.0 is not supported.
DVD-RAM Version 2.2/12X-SPEED DVD-RAM Revision 5.0 disc is not supported.

*3

The Blu-ray Disc drive on your computer does not support BD-RE Disc media in Version 1.0 format and Blu-ray Disc media with a cartridge.

*4

Supports writing data to BD-R Version 1.1/1.2/1.3 discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB) and BD-RE Version

2.1 discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB).

*5

Writing data to Ultra Speed CD-RW discs is not supported.

PPPPPRPPPRPRPR PR PR – –

PPPP

Extra

CD-R/RWDVD-

*5

PR

DVD-

ROM

PPPRPRPRPRPRPP

DVD-R/RWDVD+R/RWDVD+R DL

Video

(Double
Layer)

DVD-R DL
(Dual
Layer)

DVD-

RAM

*1 *2

BD­ROM

BD-R/RE

PR

38

nN

*3

*4

Using Your VAIO Computer >
Using the Optical Disc Drive

!

This product is designed to play back discs that conform to the Compact Disc Digital Audio standard specifications (CD Standard). A DualDisc is a two
sided disc product which mates DVD recorded material on one side with digital audio material on the other side. Be aware that the audio side (non-DVD
side) of a DualDisc may not play on this product because it does not conform to the CD Standard.

When you buy pre-recorded or blank discs for use with your VAIO computer, be sure to read the notices on the disc package carefully to check both
playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee the compatibility of VAIO optical disc drives

with discs that are not compliant with the official "CD," "DVD," or "Blu-ray Disc" standard. USING NON-COMPLIANT DISCS CAN CAUSE FATAL DAMAGE
TO YOUR VAIO PC OR CREATE SOFTWARE CONFLICTS AND CAUSE SYSTEM HANGING.
For inquiries about disc formats, contact the individual publisher of the pre-recorded disc or the manufacturer of the recordable disc.

✍

8 cm disc writing is not supported.

!

To play copyright protected Blu-ray Disc media continually, update the AACS key. The AACS key update requires Internet access.

As with other optical media devices, circumstances may limit compatibility or prevent Blu-ray Disc media playback. VAIO computers may not support
movie playback on packaged media recorded in AVC or VC1 formats at high bit rates.

Region settings are required for some contents on DVD and BD-ROM Disc media. If the region setting on the optical disc drive does not match the
region coding on the disc, playback is not possible.

Unless your external display is compliant with the High-bandwidth Digital Content Protection (HDCP) standard, you cannot play or view the contents
on copyright protected Blu-ray Disc media.

39

nN

Some contents may restrict video output to standard definition or prohibit analog video output. It is strongly recommended that a digital HDCP
compliant environment be implemented for optimum compatibility and viewing quality.

Do not use memory-resident utility software when playing or writing a disc. This may cause the computer to malfunction.

Using Your VAIO Computer >
Using the Optical Disc Drive

40

nN

Notes on Using the Optical Disc Drive

Notes on writing data to a disc

❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc

drive.

❑ Do not strike or shake your computer while the optical disc drive is writing data to a disc.

❑ Do not plug or unplug the AC adapter while the optical disc drive is writing data to a disc.

❑ Do not attach or disconnect your computer to or from the docking station (optional) while the optical disc drive is writing

data to a disc.

Notes on playing discs

To achieve optimum performance when playing discs, you should follow these recommendations:

❑ Some CD players and computer optical disc drives may not be able to play audio CDs created with the CD-R or CD-RW

media.

❑ Some DVD players and computer optical disc drives may not be able to play DVDs created with the DVD+R DL, DVD-R

DL, DVD+R, DVD+RW, DVD-R, DVD-RW, or DVD-RAM media.

❑ You may not be able to play some of Blu-ray Disc contents on your computer, or the computer may become unstable

during Blu-ray Disc playback. To play such contents normally, download and install the latest updates for the WinDVD BD
using the VAIO Update.
For information on how to use the VAIO Update, see Updating Your Computer (page 29).

❑ Depending on system environment, you may find sound interruptions and/or dropped frames during AVC HD playback.

❑ Do not place your computer into either of the power saving modes while your computer is playing a disc.

Using Your VAIO Computer >
Using the Optical Disc Drive

41

nN

Notes on region codes

❑ Region code indicators are labeled on the discs or packages to indicate in which region and on what type of player you

can play the disc. If the region code indicates "all," you can play this disc in most regions of the world. If the region code
for your residence area is different from the label, you cannot play the disc on your computer.

Using Your VAIO Computer >
Using the Optical Disc Drive

42

nN

Playing Discs

To play a disc

1 Insert a disc into the optical disc drive.

!

Connect the AC adapter to the computer and close all running software applications before playing a disc.

2 If nothing appears on the desktop, click Start, All Programs, and the desired software to play the disc.

For instructions on how to use the software, see the help file included with the software.

Copying Files to Discs

To copy files to a disc

1 Insert a recordable disc into the optical disc drive.

!

Connect the AC adapter to the computer and close all running software applications before copying files to a disc.

2 If nothing appears on the desktop, click Start, All Programs, and the desired disc burning software to copy files to the

disc.
For instructions on how to use the software, see the help file included with the software.

Using Your VAIO Computer >
Using the Memory Stick

43

nN

Using the Memory Stick

The Memory Stick is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing
digital data with compatible products, such as digital cameras, mobile phones, and other devices. Because it is removable,
it can be used for external data storage.

Before You Use the Memory Stick

The Memory Stick slot on your computer can accommodate both standard- and Duo-size media and supports Memory Stick
PRO, Memory Stick PRO Duo, and Memory Stick PRO-HG Duo with high-speed data transfer and large data capacity
capabilities.

For the latest information about the Memory Stick, visit the Memory Stick web site at http://www.memorystick.com/en/

.

Using Your VAIO Computer >
Using the Memory Stick

Inserting and Removing a Memory Stick

To insert a Memory Stick

1 Locate the Memory Stick slot.

2 Hold the Memory Stick with the arrow facing upward and pointing toward the slot.

3 Carefully slide the Memory Stick into the slot until it clicks into place.

✍

The Memory Stick is automatically detected by your system and the contents on the Memory Stick are displayed. If nothing appears on the desktop,
click Start, Computer, and double-click the Memory Stick icon.

44

nN

Using Your VAIO Computer >
Using the Memory Stick

✍

You can insert a Duo-size Memory Stick directly into the Memory Stick slot without using a Memory Stick Duo adaptor.

!

Be sure to hold the Memory Stick with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the
media, do not force the Memory Stick into the slot if you cannot insert it smoothly.

Before using a Memory Stick Micro (M2), be sure to insert it into an M2 Standard-size adaptor or M2 Duo adaptor. If you insert the media directly into
the Memory Stick slot without the adaptor, you may not be able to remove it from the slot.

The Memory Stick Micro in an M2 Duo adaptor may not operate properly if it is additionally inserted into a Memory Stick Duo adaptor.

To remove a Memory Stick

!

Do not remove the Memory Stick while the Media Access indicator light is lit. If you do, you may lose data. Large volumes of data may take time to
load, so make sure the indicator is unlit before removing the Memory Stick.

1 Check that the Media Access indicator light is unlit.

2 Push in the Memory Stick toward the computer and release.

The Memory Stick ejects.

3 Pull the Memory Stick out of the slot.

!

Always remove the Memory Stick gently, or it may pop out unexpectedly.

45

nN

Using Your VAIO Computer >
Using the Memory Stick

Formatting a Memory Stick

To format a Memory Stick

The Memory Stick has been formatted in the factory default setting and is ready for use.
If you want to reformat the media with your computer, follow these steps.

!

Be sure to use the device that is designed to format the media and supports the Memory Stick when formatting the media.

Formatting the Memory Stick erases the entire data on the media. Before formatting the media, make sure that it does not contain your valuable data.

Do not remove the Memory Stick from the slot while formatting. This could cause a malfunction.

1 Carefully slide the Memory Stick into the slot until it clicks into place.

2 Click Start and Computer to open the Computer window.

3 Right-click the Memory Stick icon and select Format.

4 Click Restore device defaults.

!

The size of the allocation unit and file system may change.

Do not select NTFS from the File system drop-down list as it may cause a malfunction.

46

nN

✍

The formatting process will be completed more quickly if you select Quick Format in Format options.

5 Click Start.

6 Follow the on-screen instructions.

!

It may take time to format the Memory Stick depending on the media type.

Using Your VAIO Computer >
Using the Memory Stick

47

nN

Notes on Using the Memory Stick

❑ Your computer has been tested and found compatible with Sony branded Memory Stick with capacity of up to 16 GB that

are available as of January 2009. However, not all the Memory Stick that meet the same specifications as the compatible
media are guaranteed of compatibility.

❑ Inserting a Memory Stick with multiple conversion adaptors is not guaranteed of compatibility.

❑ MagicGate is the general name of the copyright protection technology developed by Sony. Use a Memory Stick with the

MagicGate logo to use this feature.

❑ Except for your personal use, it is against the copyright law to use any audio and/or image data you recorded without prior

consent from the respective copyright holders. Accordingly, the Memory Stick with such copyrighted data can be used
only within the law.

❑ The Memory Stick slot on your computer does not support 8-bit parallel data transfer (high-speed data transfer).

❑ Do not insert more than one Memory Stick into the slot. Improper insertion of the media may damage both your computer

and the media.

Using Your VAIO Computer >
Using Other Modules / Memory Cards

nN

Using Other Modules / Memory Cards

Using the ExpressCard Module

Your computer is equipped with an ExpressCard/34 slot* for transferring data among digital cameras, camcorders, music
players, and other audio/video devices. This slot can only accommodate an ExpressCard/34

* Referred to as the ExpressCard slot and the ExpressCard module in this manual.

To insert an ExpressCard module

1 Locate the ExpressCard slot.

2 Carefully slide the ExpressCard module into the slot until it clicks into place.

Do not force it into the slot.

(34 mm wide) module*.

48

✍

If the module does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.

Make sure you use the most recent driver software provided by the ExpressCard module manufacturer.

Using Your VAIO Computer >
Using Other Modules / Memory Cards

To remove an ExpressCard module

✍

To remove the ExpressCard module when your computer is off, skip steps 1 to 4.

1 Double-click the Safely Remove Hardware icon on the taskbar.

2 Select the hardware you want to unplug.

3 Click Stop.

4 Follow the on-screen instructions to remove the ExpressCard module.

5 Push in the ExpressCard module toward the computer so that the module pops out.

6 Gently take hold of the ExpressCard module and pull it out of the slot.

49

nN

Using Your VAIO Computer >
Using Other Modules / Memory Cards

50

nN

Using the SD Memory Card

Your computer is equipped with an SD memory card slot. You can use this slot to transfer data among digital cameras,
camcorders, music players, and other audio/video devices.

Before you use the SD memory card

The SD memory card slot on your computer supports the following memory cards:

❑ SD memory card

❑ SDHC memory card

❑ MultiMediaCard (MMC)

For the latest information on compatible memory cards, see Finding More about Your VAIO Computer (page 5) to visit the
appropriate support web site.

Using Your VAIO Computer >
Using Other Modules / Memory Cards

To insert an SD memory card

1 Locate the SD memory card slot.

2 Hold the SD memory card with the arrow facing upward and pointing toward the slot.

3 Carefully slide the SD memory card into the slot until it clicks into place.

Do not force the card into the slot.

51

nN

✍

If the SD memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.

Using Your VAIO Computer >
Using Other Modules / Memory Cards

To remove an SD memory card

1 Check that the Media Access indicator light is unlit.

2 Push in the SD memory card toward the computer and release.

The SD memory card ejects.

3 Pull the SD memory card out of the slot.

52

nN

Using Your VAIO Computer >
Using Other Modules / Memory Cards

53

nN

Notes on Using Memory Cards

General notes on using the memory card

❑ Be sure to use memory cards that are compliant with the standards supported by your computer.

❑ Be sure to hold the memory card with the arrow pointing in the correct direction as you insert it into the slot. To avoid

damaging your computer or the media, do not force the memory card into the slot if you cannot insert it smoothly.

❑ Use care when inserting or removing the memory card from the slot. Do not force it in or out of the slot.

❑ Do not remove the memory card while the media access indicator light is lit. If you do, you may lose data.

❑ Do not attempt to insert an memory card or memory card adaptor of a different type into the memory card slot. An

incompatible memory card or memory card adaptor may cause difficulty in removing from the slot and can cause damage
to your computer.

Notes on using the SD memory card

❑ Your computer has been tested and found compatible only with major memory cards available as of January 2009.

However, not all memory cards that meet the same specifications as the compatible media are guaranteed of
compatibility.

❑ SD memory cards with capacity of up to 2 GB and SDHC memory cards with capacity of up to 32 GB have been tested

and found compatible with your computer.

❑ The SD memory card slot on your computer does not support the high-speed data transfer feature of the SD memory

card and the SDHC memory card.

Using Your VAIO Computer >
Using the Internet

54

nN

Using the Internet

Before using the Internet, you need to sign up with an Internet Service Provider (ISP) and set up devices required for
connecting your computer to the Internet.

The following types of Internet connection services may be available from your ISP:

❑ Fiber to the Home (FTTH)

❑ Digital Subscriber Line (DSL)

❑ Cable modem

❑ Satellite

❑ Dial-up

For detailed information on devices required for the Internet and how to connect your computer to the Internet, ask your ISP.

✍

To connect your computer to the Internet using the wireless LAN function, you need to set up the wireless LAN network. See Using the Wireless LAN

(page 57) for more information.

!

When you connect your computer to the Internet, be sure to take appropriate security measures to protect the computer against online threats.

If your computer is not equipped with a built-in modem, you may need to connect an external modem device, for example a USB telephone modem, a
DSL modem, or a cable modem, to your computer. For the detailed instructions on connection setups and modem configuration, see the manual that

came with your modem.

Using Your VAIO Computer >
Using the Internet

To connect a telephone cable

!

The following procedure applies to models with a built-in modem only.

1 Plug one end of the phone cable (1) into the modem port on the computer.

2 Plug the other end into the wall jack (2).

!

Your computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a
private branch exchange (PBX). Some of these connections may result in excess electrical current and could cause a malfunction in the built-in modem.

If you connect a telephone cable coming through a splitter, the modem or connected device may not work properly.

To set up a dial-up connection to the Internet

!

The following procedure applies to models with a built-in modem only.

1 Click Start and Control Panel.

2 Click Network and Internet.

3 Click Network and Sharing Center.

4 Click Set up a connection or network in the left pane.

5 Click Set up a dial-up connection and Next.

6 Follow the on-screen instructions.

55

nN

Using Your VAIO Computer >
Using the Network (LAN)

56

nN

Using the Network (LAN)

You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T type networks with an Ethernet network cable.
Connect one end of a network cable (not supplied) to the network (Ethernet) port on the computer or the optional docking
station and the other end to your network. For detailed settings and devices needed to connect to the network, ask your
network administrator.

✍

Your computer can be connected to the network with the default settings.

When your computer is attached to the optional docking station, you need to select which network (Ethernet) port to use. Follow the on-screen
instructions.

!

Do not plug a telephone cable into the network (Ethernet) port on your computer.
If the network (Ethernet) port is connected to one of the telephone lines mentioned below, high electric current to the port may cause damage,
overheating, or fire.

- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)

- Public telephone subscriber line

- Private branch exchange (PBX)

Using Your VAIO Computer >
Using the Wireless LAN

57

nN

Using the Wireless LAN

Using the Wireless LAN (WLAN), all your digital devices with the built-in WLAN function communicate freely with each other
through a network. A WLAN is a network in which a user can connect to a Local Area Network (LAN) through a wireless (radio)
connection.

Features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.

The WLAN supports all normal Ethernet connectivity, but with the added benefits of mobility and roaming. You can still access
information, Internet/intranet and network resources, even in the middle of a meeting, or as you move from one place to
another.

You can communicate without an access point, which means that you can communicate with a limited number of computers
(ad-hoc). Or you can communicate through an access point, which allows you to create a full infrastructure network.

Using Your VAIO Computer >
Using the Wireless LAN

To use the wireless LAN function

To use the wireless LAN function, you first need to set up the wireless LAN function.

!

Be sure to turn on the WIRELESS switch before starting the wireless LAN function.

The IEEE 802.11a standard, using the 5 GHz band, and the IEEE 802.11n draft standard, using the 2.4 GHz or 5 GHz band, are not available on ad-hoc
networks.

❑ On models with the SmartWi Connection Utility

Use the SmartWi Connection Utility to set up the wireless LAN function. See the SmartWi Connection Utility Help for
more information.

To access this on-screen guide:

1 Click Start, All Programs, and SmartWi Connection Utility.

2 Click SmartWi Connection Utility Help.

❑ On models without the SmartWi Connection Utility

Search for wireless LAN information using Windows Help and Support to set up and use the wireless LAN function.

58

nN

Using Your VAIO Computer >
Using the Wireless LAN

✍

In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the
WLAN function, read the Safety Information carefully.

WLAN uses the IEEE 802.11a
the encryption methods: Wired Equivalent Privacy (WEP), which is a security protocol, Wi-Fi Protected Access 2 (WPA2), and Wi-Fi Protected Access

(WPA). Proposed jointly by the IEEE and Wi-Fi Alliance, both WPA2 and WPA are specifications of standards based on interoperable security
enhancements that increase the level of data protection and access control for existing Wi-Fi networks. WPA is designed to be forward compatible with
the IEEE 802.11i specification. It utilizes the enhanced data encryption Temporal Key Integrity Protocol (TKIP) in addition to user authentication using

802.1X and Extensible Authentication Protocol (EAP). Data encryption protects the vulnerable wireless link between clients and access points. Besides
that, there are other typical LAN security mechanisms to ensure privacy, such as: password protection, end-to-end encryption, virtual private networks,
and authentication. WPA2, the second generation of WPA, provides stronger data protection and network access control and is also designed to secure
all versions of 802.11 devices, including 802.11b, 802.11a, 802.11g, and 802.11n draft standard, multi-band and multi-mode. In addition, based on
the ratified IEEE 802.11i standard, WPA2 provides government grade security by implementing the National Institute of Standards and Technology
(NIST) FIPS 140-2 compliant AES encryption algorithm and 802.1X-based authentication. WPA2 is backward compatible with WPA.

* See the specifications to find out about the configuration of your computer.

The IEEE 802.11b/g standard is a wireless LAN standard, using the 2.4 GHz band. The IEEE 802.11g standard provides higher-speed communications
than the IEEE 802.11b standard.

The IEEE 802.11a standard is a wireless LAN standard, using the 5 GHz band.

The IEEE 802.11n draft standard is a wireless LAN standard, using the 2.4 GHz or 5 GHz band.

*

/b/g standard or the IEEE 802.11n* draft standard, which specifies the type of technology used. The standard includes

59

nN

Wireless LAN devices using the 2.4 GHz band cannot communicate with devices using the 5 GHz band because the frequencies are different.

The 2.4 GHz band used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference from
other devices that use the same band are employed on wireless LAN compatible devices, such interference may cause lower communication speed,

narrower communication range, or broken wireless connections.

Using Your VAIO Computer >
Using the Wireless LAN

The communication speed varies depending on the distance between communication devices, existence of obstacles between such devices, the device
configuration, the radio conditions, and the software in use. In addition, communications may be cut off depending on the radio conditions.

The communication range varies depending on the actual distance between communication devices, existence of obstacles between such devices, the
radio conditions, the ambient environment that includes existence of walls and materials of such walls, and the software in use.

Actual communication speed may not be as fast as the one displayed on your computer.

Deploying IEEE 802.11b and IEEE 802.11g products on the same wireless network may reduce the communication speed due to radio interference.
Taking this into consideration, the IEEE 802.11g products are designed to reduce the communication speed to ensure communications with

IEEE 802.11b products. When the communication speed is not as fast as expected, changing the wireless channel on the access point may increase
the communication speed.

60

nN

Using Your VAIO Computer >
Using the Bluetooth Function

61

nN

Using the Bluetooth Function

You can establish wireless communications between your computer and other Bluetooth devices such as another computer
or a mobile phone. You can transfer data between these devices without cables at a range of up to 33 feet (10 meters) in an
open area.

Features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.

To use the Bluetooth function

To use the Bluetooth function, you first need to set up the Bluetooth function.

!

Be sure to turn on the WIRELESS switch before starting the Bluetooth function.

❑ On models with the SmartWi Connection Utility

Use the SmartWi Connection Utility to set up the Bluetooth function. See the SmartWi Connection Utility Help for
more information.

To access this on-screen guide:

1 Click Start, All Programs, and SmartWi Connection Utility.

2 Click SmartWi Connection Utility Help.

❑ On models without the SmartWi Connection Utility

Search for Bluetooth information using Windows Help and Support to set up and use the Bluetooth function.

Using Your VAIO Computer >
Using the Bluetooth Function

62

nN

Notes on using the Bluetooth function

❑ The data transfer rate varies, depending on the following conditions:

❑ Obstacles, such as walls, located between devices

❑ Distance between devices

❑ Material used in walls

❑ Proximity to microwaves and cordless telephones

❑ Radio frequency interference and other environmental conditions

❑ Device configuration

❑ Type of software application

❑ Type of operating system

❑ Use of both wireless LAN and Bluetooth functions at the same time on your computer

❑ Size of file being exchanged

❑ Large files may occasionally be corrupted during continuous transfer due to limitations of the Bluetooth standard and

electromagnetic interference in the environment.

❑ All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained. Even if

standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange may
not be possible in all situations.

❑ Video and audio may not be synchronized if you play videos on your computer with audio output from a connected

Bluetooth device. This is a frequent occurrence with Bluetooth technology and is not a malfunction.

❑ The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth

devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous
use of the Bluetooth function and wireless communication devices, however, may cause radio interference and result in
reduced communication speeds and distances than the standard values.

Using Your VAIO Computer >
Using the Bluetooth Function

63

nN

❑ The Bluetooth function may not work with other devices, depending on the manufacturer or the software version employed

by the manufacturer.

❑ Connecting multiple Bluetooth devices to your computer may cause channel congestion, resulting in poor performance

of the devices. This is normal with Bluetooth technology and is not a malfunction.

Using Your VAIO Computer >
Using the Bluetooth Function

64

nN

Bluetooth Security

The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to
communicate. With the authentication function, you can prevent any anonymous Bluetooth devices from accessing your
computer.

The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be
determined for both devices to be registered. Once a device is registered, there is no need to re-enter the passkey.

✍

The passkey can be different each time, but must be the same at both ends.

For certain devices, such as a mouse, no passkey can be entered.

Using Your VAIO Computer >
Using the Bluetooth Function

nN

Communicating with Another Bluetooth Device

You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a
mouse, or a digital camera without the use of any cables.

65

To communicate with another Bluetooth device

To communicate with another Bluetooth device, you first need to set up the Bluetooth function. For setting up and using the
Bluetooth function, search for Bluetooth information using Windows Help and Support.

!

Be sure to turn on the WIRELESS switch before starting the Bluetooth function.

Using Your VAIO Computer >
Using Fingerprint Authentication

Using Fingerprint Authentication

Your computer is equipped with a fingerprint sensor to provide you with additional convenience.

Once you have registered your fingerprint(s), the fingerprint authentication function offers:

❑ A substitute for password entry

❑ Logging onto Windows (page 70)

If you have registered your fingerprints for your user account, you can substitute fingerprint authentication for
password entry when logging onto Windows.

❑ Power-on Security feature (page 70)

If you have set the power-on password (page 115) and/or the hard disk password (page 120), you can substitute
fingerprint authentication for password entry when starting your computer.

❑ Password Bank for quick web site access (page 71)

You can substitute fingerprint authentication for entering information (user accounts, passwords, etc.) required to access
the password-protected web sites.

❑ File Safe feature to encrypt/decrypt data (page 71)

With the File Safe feature, you can encrypt files and folder to create an encrypted archive. To decrypt or access such
encrypted archives, you can use the fingerprint authentication or enter the password you specified for encryption.

❑ Application launcher function for quick application access (page 71)

Once you have assigned an application to your finger, you can then swipe the finger across the fingerprint sensor to
launch the assigned application.

66

nN

Using Your VAIO Computer >
Using Fingerprint Authentication

Registering a Fingerprint

To use the fingerprint authentication function, you must register your fingerprint(s) in your computer.

✍

Set the Windows password on your computer before registration. See Adding the Windows Password (page 124) for the detailed instructions.

To register a fingerprint

✍

Up to 10 fingerprints can be registered for each user and up to 21 fingerprints can be registered for logging onto your system using the Power-on
Security feature. You can also select the fingerprint you want to use for the Power-on Security feature later.

1 Click Start, All Programs, Protector Suite QL, and Control Center.

2 Click Fingerprints and Initialize.

3 Follow the on-screen instructions.

✍

For detailed information, see the help file.

67

nN

Using Your VAIO Computer >
Using Fingerprint Authentication

If you have failed to register a fingerprint, follow these steps to try again.

1 Place the top joint of your finger on the fingerprint sensor (1).

68

nN

Using Your VAIO Computer >
Using Fingerprint Authentication

2 Swipe your finger perpendicularly across the fingerprint sensor.

!

Place your fingertip flat in the center of the fingerprint sensor.

Scan your fingerprint from the top joint of the finger to the fingertip.

Keep your finger in contact with the fingerprint sensor while swiping.

Fingerprint registration may fail if you move your finger too fast or too slow. Let the fingerprint sensor take about one second to scan your fingerprint.

You may not be able to register and/or have your fingerprint(s) recognized if your finger is excessively dry or wet, wrinkled, injured, dirty, etc.

Register more than one fingerprint in case that the fingerprint sensor fails to recognize the fingerprint.

69

nN

Be sure to clean your fingertip(s) and the fingerprint sensor before swiping in order to keep good recognition performance.

Using Your VAIO Computer >
Using Fingerprint Authentication

70

nN

Logging Onto Your System

To use the fingerprint authentication function in place of password entry to log onto your system, you need to set the power­on, hard disk, and Windows passwords and configure your computer for fingerprint authentication.

For setting the power-on, hard disk, and Windows passwords, see Setting the Password (page 114).

For detailed information, see the help file included with the Protector Suite QL.

Logging onto Windows

If you have registered your fingerprints for your user account, you can substitute fingerprint authentication for Windows
password entry. To log onto Windows, swipe the registered finger across the fingerprint sensor when the Windows log-on
screen appears.

Power-on Security feature

If you have set the power-on password (page 115) and/or the hard disk password (page 120), you can substitute fingerprint
authentication for password entry when starting your computer.

Using Your VAIO Computer >
Using Fingerprint Authentication

71

nN

Using the Password Bank

Once you have registered your user information (user accounts, passwords, etc.) for web sites in the Password Bank, you
can substitute fingerprint authentication for entering information required to access the password-protected web sites.

For detailed information, see the help file included with the Protector Suite QL.

!

You may not be able to use the Password Bank feature depending on the web site you access.

Using the File Safe Feature

With the File Safe feature, you can create an encrypted archive to include a file and/or folder for protection against
unauthorized access. The encrypted archive can be decrypted or unlocked for included file/folder access by swiping your
finger across the fingerprint sensor or entering the backup password you specified for encryption.

For detailed information, see the help file included with the Protector Suite QL.

Using the Application Launcher

The application launcher feature is available on your computer for launching your preferred application (executable file) that
is assigned to one of your fingers with a registered fingerprint. Once you have assigned an application to your finger, you can
launch the assigned application simply by swiping the finger across the fingerprint sensor.

For detailed information, see the help file included with the Protector Suite QL.

Using Fingerprint Authentication with the TPM

With the TPM data encryption feature, using fingerprint authentication can strengthen computer security. For instructions on
how to use the TPM, see Using the TPM (page 73).

For detailed information, see the help file included with the Protector Suite QL.

Using Your VAIO Computer >
Using Fingerprint Authentication

72

nN

Erasing the Registered Fingerprints

Before disposing of your computer or transferring it to a third person, it is strongly recommended you erase the fingerprint
data registered on the fingerprint sensor after erasing the data stored on your built-in storage device.

To erase the registered fingerprints

1 Turn on the computer.

2 Press the F2 key when the VAIO logo appears.

The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.

3 Press the < or , key to select Security to display the Security tab.

4 Press the

5 At the confirmation prompt, select Continue and press the Enter key.

The fingerprint data registered on the fingerprint sensor is erased automatically after your system restarts.

m key to select Clear Fingerprint Data and press the Enter key.

Using Your VAIO Computer >
Using the TPM

nN

Using the TPM

The embedded Trusted Platform Module (TPM) is embedded in your computer to provide basic security functions. In
combination with the TPM, you can encrypt and decrypt your data to strengthen computer security against inappropriate
access.

TPMs are defined by Trusted Computing Group (TCG) and also called security chips.

73

Using Your VAIO Computer >
Using the TPM

Important Notice

❑ Do not encrypt the files containing keys to be used for encryption and the folders that include such files.

Encrypting the files in the folders containing basic user keys and others, using the Encrypting File System (EFS) will
disable you to launch your TPM software and decrypt the encrypted data in the following cases:

❑ The TPM software has been installed.

❑ The platform has been initialized.

❑ The EFS function has been enabled in user initialization process.

With the default settings, the files in the folders below cannot be encrypted because they have system attributes.
Do not change the system attributes of the files in the folders below.

!

The following folders are invisible by default.

❑ Folders containing basic user keys and others

C:\<username>\All Users\Infineon\TPM Software 2.0\BackupData
C:\<username>\All Users\Infineon\TPM Software 2.0\PlatformKeyData
C:\<username>\All Users\Infineon\TPM Software 2.0\RestoreData
(C:\<username>\All Users is a shortcut to C:\ProgramData.)
C:\<username>\<account>\AppData\Roaming\Infineon\TPM Software 2.0\UserKeyData

74

nN

Using Your VAIO Computer >
Using the TPM

❑ Do not encrypt any one of the following archive, backup, or token files. There will be no way to restore them if you

carelessly encrypt them.
Sony assumes no liability for any troubles and damages arising out of your careless encryption of the following files and
folders including them.

❑ Automatic backup file

Default file name: SPSystemBackup.xml
Default path: None (Clicking Browse displays the <userfolder>\Documents\Security Platform window.)

❑ Storage folder for automatic backup data

Default folder name: SPSystemBackup
The folder is created as the subfolder for the SPSystemBackup.xml file.

❑ Token file for restoring the TPM configuration

Default file name: SPEmRecToken.xml
Default path: Removable media (FD, USB memory, etc.)

❑ Key and certificate backup file

Default file name: SpBackupArchive.xml
Default path: None (Clicking Browse displays the <userfolder>\Documents\Security Platform window.)

❑ PSD backup file

Default file name: SpPSDBackup.fsb
Default path: None (Clicking Browse displays the <userfolder>\Documents\Security Platform window.)

75

nN

Using Your VAIO Computer >
Using the TPM

76

nN

❑ Do not encrypt any one of the following password reset token or secret files. There will be no way to reset the password

if you carelessly encrypt them.
Sony assumes no liability for any troubles and damages arising out of your careless encryption of the following files and
folders including them.

❑ Password reset token file

Default file name: SPPwdResetToken.xml
Default path: Removable media (FD, USB memory, etc.)

❑ Password reset secret file

Default file name: SPPwdResetSecret.xml
Default path: Removable media (FD, USB memory, etc.)

Using Your VAIO Computer >
Using the TPM

77

nN

Configuring the TPM

To use the embedded TPM, you need to:

1 Enable the TPM in the BIOS setup screen.

2 Install the Infineon TPM Professional Package.

3 Initialize and configure the TPM.

To enable the TPM in the BIOS setup screen

1 Turn on your computer.

2 Press the F2 key when the VAIO logo appears.

The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.

3 Press the < or , key to select the Security tab, the M or m key to select Change TPM State, and then the Enter key.
4 Press the M or m key to select Enable and then the Enter key.
5 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.

6 After your system restarts, select Execute in the confirmation window and then press the Enter key.

✍

You can also disable the TPM and clear the TPM configuration in the BIOS setup screen.

!

Before enabling the TPM, be sure to set the power-on and hard disk passwords to protect against unauthorized modification of the TPM configuration.

If the TPM is enabled, it will take longer before the VAIO logo appears due to security checks at computer startup.

You will not be able to access any TPM-protected data if you clear the TPM ownership. Before clearing the TPM configuration, be sure to make backup
copies of the TPM-protected data.

Using Your VAIO Computer >
Using the TPM

78

nN

To install the Infineon TPM Professional Package

Read the Readme.txt in the C:\Infineon\Readme folder. Then, double-click setup.exe in the C:\Infineon folder to install the
package.

To install this package, you must have administrative rights on the computer.

!

You need to set a few passwords while installing the Infineon TPM Professional Package. Without these passwords, you will not be able to restore
any TPM-protected data or backup files. Be sure to write down the passwords and keep them safe and private from other people.

To initialize and configure the TPM

See the on-screen documentation for detailed information. To open the documentation, click Start, All Programs, Infineon

Security Platform Solution, and Help.

!

The maintenance and management of TPM-protected data must be carried out at your own risk. Sony assumes no liability for any defects arising out
of your data maintenance and management.

Using Your VAIO Computer >
Using the TPM

79

nN

Using BitLocker Drive Encryption with the TPM

BitLocker Drive Encryption is a data encryption feature that is available on models with Windows Vista Ultimate. Enabling
BitLocker Drive Encryption in conjunction with the TPM encrypts all data on the built-in storage device.

For detailed information on how to use and configure BitLocker Drive Encryption, see Windows Help and Support.

See the specifications to find out about the configuration of your computer.

Notes on using BitLocker Drive Encryption

❑ Be sure to initialize the TPM with the Infineon TPM Professional Package before enabling BitLocker Drive Encryption.

If you enable it without initializing the TPM, a TPM owner password is not generated, so you will not be able to configure
the Infineon TPM Professional Package.

❑ The Infineon TPM Professional Package does not make a backup copy of a file (recovery password) for BitLocker

Drive Encryption.

❑ An additional BitLocker system partition (S drive) has been pre-configured. This system partition uses 1.5 GB of your total

built-in storage device volume.

❑ You must enable the TPM in the BIOS setup screen in order to turn on BitLocker Drive Encryption.

❑ Do not encrypt data on a storage device (such as a USB flash memory device) on which a recovery key is stored using

BitLocker Drive Encryption.

Using Your VAIO Computer >
Using the TPM

80

nN

To unlock the encrypted data with a recovery key stored on a USB flash memory device

To unlock the encrypted data with a recovery key stored on a USB flash memory device, your system needs to access the
USB flash memory device when you boot the computer. Follow these steps to configure the boot order in the BIOS setup
screen:

1 Turn on your computer.

2 Press the F2 key when the VAIO logo appears.

The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.

3 Press the < or , key to select the Security tab, the M or m key to select Change TPM State, and then the Enter key.
4 Press the M or m key to select Enable and then the Enter key.
5 Press the < or , key to select Boot and then select Enabled for External Device Boot.
6 Press the M or m key to select Boot Priority and then the Enter key.

7 Press the F5 or F6 key to change the boot device order so that Internal Hard Disk is listed higher than External Device.

!

You need to move Internal Optical Drive to the top of the list to recover the computer system using your recovery discs.

8 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.

9 After your system restarts, select Execute in the confirmation window and then press the Enter key.

10 Follow the instructions in Windows Help and Support to enable BitLocker Drive Encryption.

11 Save the recovery password to the USB flash memory device in the window for saving the recovery password.

12 Follow the on-screen instructions.

The encryption process will start.

Using Your VAIO Computer >
Using the TPM

!

Updating your BIOS with updating software, such as VAIO Update, changes the BIOS settings back to the default. You need to repeat the steps above
again.

It takes several hours to complete the encryption process.

81

nN

Using Peripheral Devices >

Using Peripheral Devices

You can add functionality to your VAIO computer by using the various ports on the computer.

❑ Connecting a Docking Station (page 83)

❑ Connecting External Speakers or Headphones (page 91)

❑ Connecting an External Display (page 92)

❑ Selecting Display Modes (page 101)

❑ Using the Multiple Monitors Function (page 103)

❑ Connecting an External Microphone (page 106)

❑ Connecting a USB Device (page 107)

❑ Connecting an i.LINK Device (page 109)

82

nN

Using Peripheral Devices >
Connecting a Docking Station

83

nN

Connecting a Docking Station

Attaching a docking station enables you to connect additional peripherals to your computer, such as a printer and an external
display.

A docking station is not supplied with your computer and is available as an optional accessory.

Using Peripheral Devices >
Connecting a Docking Station

Locating Ports on the Docking Station

A DC IN indicator

Illuminates when the docking station is powered.

B IN USE indicator (page 88)
C UNDOCK button (page 88)
D DC IN port (page 85)
E Network (Ethernet) port (1000BASE-T / 100BASE-TX /

10BASE-T) (page 56)

F Hi-Speed USB (USB 2.0) ports
G DVI-D port

*2

(page 93)

*1

(page 107)

H MONITOR port (page 93)

*1

Support high-/full-/low- speeds.

*2

Functional only when your computer is in SPEED mode.

84

nN

!

The docking station can be powered only through the AC adapter supplied with your computer. Do not unplug the AC adapter from the docking station
and the AC outlet while using the docking station. This may cause data damage or hardware malfunctions.

Simultaneous use of the HDMI output port on your computer and the DVI-D port or the MONITOR port on the docking station is not possible.

Using Peripheral Devices >
Connecting a Docking Station

Attaching Your Computer to the Docking Station

!

Be sure to install the battery pack before attaching your computer to the docking station.

To attach your computer to the docking station

!

Use the AC adapter supplied with your computer.

Do not move your computer while it is attached to the docking station. This may detach the docking station and cause damage to both units.

1 Disconnect all peripherals from the computer.

2 Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet.

3 Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the docking station (4).

85

nN

4 Unfold the docking station cover.

Using Peripheral Devices >
Connecting a Docking Station

5 Slide open the docking station connector cover on the bottom of the computer.

6 Align the rear bottom corners of the computer with the guides on the docking station.

86

nN

Using Peripheral Devices >
Connecting a Docking Station

7 Gently push down the computer until it clicks into place.

8 Turn on the computer.

87

nN

Using Peripheral Devices >
Connecting a Docking Station

Disconnecting Your Computer from the Docking Station

!

Make sure that no devices connected to the docking station are in use before disconnecting your computer.

Do not disconnect your computer from the docking station while the IN USE indicator light is lit. Disconnecting the computer while the IN USE indicator
is lit may result in loss of unsaved data or a failure of the computer.

When the battery pack is running out of power, disconnecting your computer from the docking station may result in loss of unsaved data.

Do not disconnect your computer from the docking station during video playback. Be sure to close video playback software before disconnection.

Once you have completed the steps in To disconnect your computer from the docking station (page 89), be sure to take your computer off the docking
station. Use of the computer while on the docking station may cause unstable operations.

88

nN

Using Peripheral Devices >
Connecting a Docking Station

To disconnect your computer from the docking station

1 Press the UNDOCK button (1) and wait until the IN USE indicator light (2) turns off.

✍

If the IN USE indicator is unlit, you do not have to press the UNDOCK button.

Pressing the UNDOCK button while your computer is in a power saving mode brings the computer to Normal mode first, and then initiates the
disconnection process.

!

Once you have placed your computer back in Normal mode, be sure to take your computer off the docking station. Use of the computer while on the
docking station may cause unstable operations.

89

nN

Using Peripheral Devices >
Connecting a Docking Station

90

nN

2 Lift the computer off the docking station.

3 Close the docking station connector cover on the bottom of the computer.

Alternatively, you can disconnect the computer from the docking station as follows:

1 Click Start, the arrow next to the Lock button, and Undock.

2 Make sure that a message balloon appears and the IN USE indicator light turns off. Then lift the computer off the docking

station.

3 Close the docking station connector cover on the bottom of the computer.

!

It is extremely important that you close the docking station connector cover after disconnecting your computer from the docking station. If the cover
is left open, dust may get inside and damage the computer.

✍

To disconnect the docking station completely from AC power, unplug the AC adapter.

Using Peripheral Devices >
Connecting External Speakers or Headphones

Connecting External Speakers or Headphones

You can connect external sound output devices (not supplied), such as speakers or headphones, to your computer.

To connect external speakers

✍

Make sure your speakers are designed for computer use.

!

Turn down the volume of the speakers before you turn them on.

Connect external speakers (1) to the headphones jack (2) i with a speaker cable (3) (not supplied).

91

nN

Using Peripheral Devices >
Connecting an External Display

92

nN

Connecting an External Display

You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer
display or a projector.

!

While your computer is in SPEED mode (using the NVIDIA video controller), the window stating that an external display is detected does not appear
when you connect the external display to the computer for the first time. To change the display output to the external display, press the Fn+F7 keys.

The screen resolution of your external display may change when you switch between the performance modes.

✍

Connect the power cord of your external display after connecting all other cables.

Using Peripheral Devices >
Connecting an External Display

93

nN

Connecting a Computer Display

You can connect a computer display (monitor) either directly to your computer or via the optional docking station.

To connect a computer display

!

The monitor port on your computer is not accessible when the computer is attached to the docking station.

The HDMI output port on your computer and the DVI-D port on the docking station are functional only when your computer is in SPEED mode.

If you connect an HDMI cable to the HDMI output port on your computer or a display cable to the DVI-D port on the docking station when your computer
is in STAMINA mode, a confirmation window appears. Follow the on-screen instructions to change the performance mode to SPEED mode.

1 If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.
2 If you want to connect an analog monitor, plug the display cable (2) into the monitor port (3) a on the computer or on the

docking station.

Using Peripheral Devices >
Connecting an External Display

94

nN

3 If you want to connect a TFT/DVI monitor, plug the display cable (2) to an HDMI to DVI-D adapter (3) and plug one end

of the HDMI cable (4) to the HDMI to DVI-D adapter (3) and the other end to the HDMI output port (5) on the computer,
or plug the display cable(2) into the DVI-D port on the docking station.

4 If the external computer display is equipped with an HDMI input port, plug one end of an HDMI cable to the HDMI output

port on the computer and the other end to the HDMI input port on the computer display.

!

Your computer is compliant with the HDCP standard and capable of encrypting the transmission channel of digital video signals for the purpose of
copyright protection, which enables you to play and view a wide variety of copyright protected, high-quality contents. To view the copyright protected
contents, connect an HDCP-compliant monitor to the HDMI output port on your computer or the DVI-D port on the docking station. If your computer
has a non-compliant monitor connected, you will not be able to play or view any copyright protected contents.

✍

DVI-D stands for Digital Visual Interface - Digital. It is a type of DVI port that supports only digital video signals (no analog video signals). It has 24 pins.

A DVI-I (Digital Visual Interface - Integrated) port supports digital video and analog video signals. It has 29 pins.

Using Peripheral Devices >
Connecting an External Display

nN

Connecting a Multimedia Computer Display

You can connect a multimedia computer display that includes built-in speakers and a microphone either directly to your
computer or via the optional docking station.

To connect a multimedia computer display

!

The monitor port on your computer is not accessible when the computer is attached to the docking station.

1 Plug the power cord of your multimedia computer display (1) into an AC outlet.
2 Plug the display cable (2) into the monitor port (3) a on the computer or on the docking station.
3 Plug the speaker cable (4) into the headphones jack (5) i on the computer.
4 Plug the microphone cable (6) into the microphone jack (7) m on the computer.

95

Using Peripheral Devices >
Connecting an External Display

96

nN

Using Peripheral Devices >
Connecting an External Display

Connecting a TV

You can connect a TV with an HDMI input port to your computer.

To connect a TV to your computer

!

To hear sound from the device connected to the HDMI output port, you need to change the device for sound output. For the detailed instructions, see
How do I change the sound output device? (page 196).

The HDMI output port is functional only when your computer is in SPEED mode.

If you connect an HDMI cable to the HDMI output port when your computer is in STAMINA mode, a confirmation window appears. Follow the on-screen
instructions to change the performance mode to SPEED mode.

1 Plug the power cord of your TV (1) into an AC outlet.

2 Plug one end of an HDMI cable (2) to the HDMI output port (3) on the computer and the other end to the TV.

3 Switch the input channel of the TV to external input.

4 Set up the TV configuration system.

97

nN

Using Peripheral Devices >
Connecting an External Display

!

If a device driver other than the one provided by Sony is used, the image will not be displayed and the audio will not be heard. Always use the device
driver provided by Sony for updates.

✍

See the manual that came with your TV for more information on installation and use.

The HDMI cable carries both video and audio signals.

98

nN

Using Peripheral Devices >
Connecting an External Display

99

nN

Additionally, you can connect a high-quality home theater receiver or other surround sound decoder devices between your
computer and TV using an HDMI connection.

To connect a high-quality digital sound output device between your computer and a TV

!

Before connecting the device to the computer, make sure the HDMI connection has been set up between the TV and the home theater receiver or
surround sound decoder device first.

To hear sound from the device connected to the HDMI output port, you need to change the device for sound output. For the detailed instructions, see
How do I change the sound output device? (page 196).

The HDMI output port is functional only when your computer is in SPEED mode.

If you connect an HDMI cable to the HDMI output port when your computer is in STAMINA mode, a confirmation window appears. Follow the on-screen
instructions to change the performance mode to SPEED mode.

1 Turn on the TV and set its input to the HDMI input.

2 Turn on the home theater receiver or surround sound decoder device and set its input to the HDMI input.

3 Plug one end of an HDMI cable to the HDMI input port on the home theater receiver or surround sound decoder device

and the other end to the HDMI output port on the computer.

4 Press the Fn+F7 keys to change the display output to the connected TV.

✍

You can adjust the screen resolution of the connected TV with your computer. See Why doesn't my screen display a video? (page 186) for the detailed
procedure.

With the HDMI connection, the volume can be adjusted by the connected audio device only. Your computer has no control over the output volume of
any connected devices.

Using Peripheral Devices >
Connecting an External Display

100

nN

Connecting a Projector

You can connect a projector (for example, the Sony LCD projector) either directly to your computer or via the optional docking
station.

To connect a projector

!

The monitor port on your computer is not accessible when the computer is attached to the docking station.

1 Connect the power cord (1) of your projector into an AC outlet.
2 Plug a display cable (2) into the monitor port (3) a on the computer or on the docking station.
3 Plug an audio cable (4) into the headphones jack (5) i on the computer.

4 Plug the display cable and the audio cable into the port and jack on the projector (6).