Page 1
User Guide
Personal Computer
VGN-UX400 Series
N
Page 2
Contents
Before Use .........................................................................................................................................................................6
E
NERGY STAR ...............................................................................................................................................................7
Documentation .............................................................................................................................................................8
Getting Started .................................................................................................................................................................12
Locating Controls and Ports.......................................................................................................................................13
About the Indicator Lights ..........................................................................................................................................22
Holding Your Computer .............................................................................................................................................24
Connecting a Power Source ......................................................................................................................................26
Using the Battery Pack ..............................................................................................................................................27
Shutting Down Your Computer Safely .......................................................................................................................31
Using Your VAIO Computer .............................................................................................................................................32
Using the Keyboard ...................................................................................................................................................33
Using the Touch Panel...............................................................................................................................................34
Using the Pointing Device..........................................................................................................................................36
Using Special-function Buttons ..................................................................................................................................38
Blocking Unintentional Operations .............................................................................................................................39
Using the Built-in MOTION EYE Camera...................................................................................................................41
Using the Memory Stick Media ..................................................................................................................................45
Using the Internet.......................................................................................................................................................50
Using Wireless LAN (WLAN) .....................................................................................................................................51
Using the Bluetooth Functionality ..............................................................................................................................59
2
nN
Page 3
3
nN
Using Peripheral Devices .................................................................................................................................................67
Connecting the Port Replicator ..................................................................................................................................68
Connecting the Display/LAN Adapter ........................................................................................................................74
Connecting an Optical Disc Drive ..............................................................................................................................75
Connecting External Speakers ..................................................................................................................................78
Connecting an External Display .................................................................................................................................79
Selecting Display Modes............................................................................................................................................84
Using the Multiple Monitors Function .........................................................................................................................85
Connecting an External Microphone ..........................................................................................................................87
Connecting a Universal Serial Bus (USB) Device......................................................................................................88
Connecting a Printer ..................................................................................................................................................91
Connecting an i.LINK Device .....................................................................................................................................92
Connecting to a Network (LAN) .................................................................................................................................93
Customizing Your VAIO Computer ..................................................................................................................................94
Setting the Password .................................................................................................................................................95
Using Fingerprint Authentication ..............................................................................................................................106
Setting Up Your Computer with VAIO Control Center..............................................................................................114
Using the Power Saving Modes ...............................................................................................................................115
Managing Power with VAIO Power Management ....................................................................................................119
Page 4
4
nN
Precautions ....................................................................................................................................................................121
On Handling the LCD Screen ..................................................................................................................................122
On Using the Power Source ....................................................................................................................................123
On Handling Your Computer....................................................................................................................................124
On Using the Built-in MOTION EYE Camera...........................................................................................................126
On Handling Floppy Disks .......................................................................................................................................127
On Handling Discs ...................................................................................................................................................128
On Using the Battery Pack.......................................................................................................................................129
On Using Headphones.............................................................................................................................................131
On Handling Memory Stick Media............................................................................................................................132
On Using the Folding Stand.....................................................................................................................................133
On Using the Adapter Holding Band ........................................................................................................................135
On Using the Wrist Strap .........................................................................................................................................136
On Replacing the Multi-pointer Cap .........................................................................................................................137
On Updating Your Computer ...................................................................................................................................138
Page 5
5
nN
Troubleshooting .............................................................................................................................................................139
Computer .................................................................................................................................................................141
System Security .......................................................................................................................................................150
Battery......................................................................................................................................................................151
Built-in MOTION EYE Camera.................................................................................................................................153
Networking ...............................................................................................................................................................156
Bluetooth Technology ..............................................................................................................................................159
Optical Discs ............................................................................................................................................................163
Display .....................................................................................................................................................................164
Printing .....................................................................................................................................................................170
Microphone ..............................................................................................................................................................171
Speakers ..................................................................................................................................................................172
Pointing Device ........................................................................................................................................................173
Keyboard..................................................................................................................................................................175
Floppy Disks ............................................................................................................................................................176
Audio/Video..............................................................................................................................................................177
Memory Stick Media ................................................................................................................................................178
Peripherals ...............................................................................................................................................................179
Support Options .............................................................................................................................................................180
Sony Support Information ........................................................................................................................................180
Program Support Information...................................................................................................................................184
Page 6
nN
Before Use
Before Use
Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has
combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal
computing experience.
!
External views illustrated in this manual may look slightly different from those of your computer.
6
Page 7
7
nN
Before Use
ENERGY STAR
As an ENERGY STAR Partner, Sony has determined that this product meets the ENERGY STAR guidelines for energy
efficiency.
The International ENERGY STAR Office Equipment Program is an international Program that promotes energy saving
through the use of computers and their office equipment. The program backs the development and dissemination of products
with functions that effectively reduce energy consumption.
For detailed information on the ENERGY STAR Program, visit the following Web sites:
❑ http://www.energystar.gov
❑ http://www.eu-energystar.org
(USA)
(Europe)
This computer is designed based on the ENERGY STAR standards and delivered with the following power saving settings:
❑ The LCD backlight is turned off automatically after inactivity of about 15 minutes.
❑ The computer enters Sleep mode automatically after inactivity of about 30 minutes.
Press any key to bring the computer back into Normal mode.
For detailed information on power saving modes, see Using the Power Saving Modes (page 115).
Page 8
8
nN
Before Use
Documentation
Your documentation includes printed information and user guides to read on your VAIO computer.
Printed Documentation
❑ Welcome mat — Contains an overview of components connection, set-up information, etc.
❑ Safety Information — Contains safety guidelines and owner information.
Non-printed Documentation
❑ User Guide (this manual) — Explains features of your computer. It also includes information about the software programs
included with your computer, as well as information on solving common problems. User Guide is provided in the PDF
format, which you can easily browse through and print out.
✍
To go to Web sites described in this manual by clicking their respective URLs beginning with http://, your computer must be connected to the Internet.
❑ Specifications — The online Specifications describe the hardware and software configurations of your VAIO computer.
To view the online Specifications:
1 Connect to the Internet.
2 Go to the Sony online support Web site at the following URLs:
http://esupport.sony.com/EN/VAIO/
http://www.sony.ca/support
http://esupport.sony.com/ES/VAIO/
http://esupport.sony.com/ES/VAIO/BR/
for customers in Canada
for customers in USA
for customers in Spanish speaking Latin American countries or areas
for customers in Brazil
Page 9
nN
Before Use
❑ VAIO Recovery Center User Guide — Provides information about restoring individual software programs, software
drivers, and drive partition(s) or your entire hard disk drive to the original factory installed settings.
To access this on-screen guide:
1 Click Start and Help and Support.
2 Click Manuals & Specifications.
3 Click VAI O Recovery Center User Guide.
™
❑ SmartWi
Connection Utility Help (Selected models only) — Provides information about setting up Bluetooth, wireless
LAN, and wireless WAN functionalities.
To access this on-screen guide:
1 Click Start, All Programs, and SmartWi Connection Utility.
2 Click SmartWi Connection Utility Help.
9
Page 10
10
nN
Before Use
Help and Support
Help and Support is easy to access and provides a single location for information and technical assistance for your VAIO
computer. Choose from the following categories to find the answers you need.
To access Help and Support, click Start and Help and Support.
❑ Manuals & Specifications
Here you will find the on-screen User Guide, warranty information, other VAIO documents, and system and software
information for your computer.
❑ VAIO Support
Access interactive help in the form of VAIO tutorials, an escalation page containing support and contact information, and
various links to VAIO online support Web sites.
❑ Backup & Recovery
Find information on how to back up and restore your operating system, system software, and your personal data.
❑ Wireless & Networking
Learn about wireless connections including Bluetooth Wireless technology and Wireless LAN. Run utilities that include
VAIO Media Setup and Windows Network and Sharing Center, and access to wireless tutorials.
❑ Security
Keep your data safe and your computer running efficiently with updates and maintenance programs from Microsoft and
Sony.
❑ VAIO Sites
Contains links to other Internet sites you might find interesting and useful.
❑ VAIO Tutorials
Sony VAIO provides guided help tutorials that help you accomplish a task. It can either perform the task for you or show
you how to do it step by step.
Page 11
❑ VAIO Registration
Please take a moment to register your VAIO computer to enjoy the following benefits:
❑ Your computer will be registered with Sony Product Support.
❑ You will receive an e-coupon good for purchase of eligible accessories at SonyStyle.com.
❑ Extended Service Plan
Sony VAIO products come with a 1 year Limited Warranty. Protect your investment further by purchasing an optional
Extended Service Plan.
11
nN
Before Use
Page 12
Getting Started
Getting Started
This section describes how to get started using your VAIO computer.
!
Before starting your computer for the first time, do not connect any other hardware that did not originally come with your computer. Be sure to start
up your computer with only the supplied accessories connected and set up your system. Upon completion, connect one device (for example, a printer,
an external hard disk drive, a scanner, and so on) at a time, following the manufacturers' instructions.
❑ Locating Controls and Ports (page 13)
❑ About the Indicator Lights (page 22)
❑ Holding Your Computer (page 24)
❑ Connecting a Power Source (page 26)
❑ Using the Battery Pack (page 27)
❑ Shutting Down Your Computer Safely (page 31)
12
nN
Page 13
Locating Controls and Ports
Take a moment to identify the controls and ports shown on the following pages.
Top
A Air vent
B Focus selection switch (page 41)
C Memory Stick slot
D Memory Stick indicator (page 22)
E CAPTURE button (page 41)
* Your computer supports Duo-size Memory Stick media only.
*
(page 46)
13
nN
Getting Started
Page 14
Front
A Left button (page 36)
B Right button (page 36)
C Center button (page 36)
D Launcher button (page 38)
E WIRELESS switch (page 51)
F Touch panel LCD screen (page 34)
14
nN
Getting Started
Page 15
Built-in speaker (monaural)
A
B Fingerprint sensor (page 106)
C Front camera (MOTION EYE) (page 41)
D Front camera (MOTION EYE) indicator (page 22)
15
nN
Getting Started
Page 16
Multi-pointer (page 36)
A
B Zoom In/Out buttons (page 38)
C Power indicator (page 22)
D POWER switch
E Built-in microphone (monaural)
16
nN
Getting Started
Page 17
Back
Getting Started
A Rear camera (MOTION EYE) (page 41)
B Rear camera (MOTION EYE) indicator (page 22)
C Stylus
Slide up and pull out the stylus for touch panel operations.
D Air vents
E WWAN antenna
When using your computer in the vertical orientation, rotate the
antenna by 90 degrees counterclockwise.
* On selected models only.
*
17
nN
Page 18
Right
Getting Started
A Strap holes
Fasten the supplied wrist strap to your computer through either
hole.
B Battery connector (page 27)
18
nN
Page 19
Left
19
nN
Getting Started
A Hi-Speed USB (USB 2.0) port
B SIM card slot
Unscrew the screw and remove the cover to access the SIM
card slot. See the SmartWi Connection Utility Guide for more
information.
*2
*1
(page 88)
C Air vent
*1
Supports high-/full-/low- speeds.
*2
On selected models only.
Page 20
Bottom
A Battery indicator (page 22)
B Hard disk drive indicator (page 22)
C Num lock indicator (page 22)
D Caps lock indicator (page 22)
E Scroll lock indicator (page 22)
F Bluetooth indicator (page 22)
G WLAN (Wireless LAN) indicator (page 22)
H WWAN (Wireless WAN) indicator
* On selected models only.
*
(page 22)
20
nN
Getting Started
Page 21
21
nN
Getting Started
A DC IN port (page 26)
B Air vent
C I/O connector (page 74)
D Headphones jack (page 78)
E Microphone jack (page 87)
Page 22
Getting Started
About the Indicator Lights
Your computer is equipped with the following indicator lights.
Indicator Functions
Power 1 Illuminates when the power of the computer is on, blinks when the computer is in Sleep mode, and turns off
when the computer is in Hibernate mode or off.
Battery e Illuminates when the computer is using battery power, blinks when the battery pack is running out of power, and
Memory Stick Illuminates when data is read from or written to the Memory Stick media in the Memory Stick slot. (Do not enter
Front/Rear camera (MOTION EYE) Illuminates while the corresponding built-in MOTION EYE camera is in use.
Hard disk drive
Num lock
Caps lock
Scroll lock
Bluetooth technology
Wireless LAN Illuminates when the wireless LAN functionality is enabled.
double-blinks when the battery pack is charging.
Sleep mode or turn off the computer when this indicator is on.) When the indicator is off, the Memory Stick media
is not being used.
Illuminates when data is read from or written to the built-in flash memory storage. Do not enter Sleep mode or
turn off the computer when this indicator is on.
Press and hold the Fn key and press the Num Lk key to activate the numeric keypad. Press it a second time
to deactivate the numeric keypad. The numeric keypad is not active when the indicator is off.
Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key
while the indicator is on. Press the key a second time to turn off the indicator. Normal typing resumes when the
Caps lock indicator is off.
Press and hold the Fn key and press the Scr Lk key to change how you scroll the display. Normal scrolling
resumes when the Scroll lock indicator is off. The Scr Lk key functions differently depending on the program
you are using and does not work with all programs.
Illuminates when the WIRELESS switch is set to ON and Bluetooth technology is enabled.
22
nN
Page 23
Indicator Functions
Wireless WAN
* On selected models only.
*
Illuminates when the wireless WAN functionality is enabled.
23
nN
Getting Started
Page 24
Getting Started
Holding Your Computer
You can hold and use your computer in either a horizontal or vertical orientation to suit your preferences.
!
In either orientation, make sure to fasten the supplied wrist strap to your computer and wear it to prevent accidental dropping of the computer from
your palms.
❑ Horizontal orientation
This is the standard orientation of your computer and, by default, the buttons on the front are assigned the functions that
help you use the computer comfortably in this orientation.
24
nN
✍
You can change the default button assignments with VAIO Control Center. See Setting Up Your Computer with VAIO Control Center (page 114) and
find out more in its help file.
The horizontal orientation is represented as Standard mode in VAIO Control Center.
Page 25
Getting Started
❑ Vertical orientation
You can use your computer in this orientation with the help of the VAIO Touch Launcher software. Press the launcher
button to start the software and select to rotate the screen view by 90 degrees clockwise.
25
nN
✍
You might additionally want to change the default button assignments for easier operations, using VAIO Control Center.
The vertical orientation is represented as Rotational mode in VAIO Control Center.
Page 26
Getting Started
Connecting a Power Source
You can use either an AC adapter or a rechargeable battery pack as a power source for your computer.
Using the AC Adapter
✍
Use your computer only with the supplied AC adapter.
To use the AC adapter
1 Plug one end of the power cord (1) into the AC adapter (3).
2 Plug the other end of the power cord into an AC outlet (2).
3 Plug the cable connected to the AC adapter (3) into the DC IN port (4) on the computer or on the port replicator.
26
nN
!
The shape of the DC In plug varies depending on the AC adapter.
✍
To disconnect your computer completely from AC power, unplug the AC adapter.
Make sure that the AC outlet is easily accessible.
If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page 118).
This power saving mode saves the time of shutting down and resuming.
Page 27
Using the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of delivery.
Installing the Battery Pack
To install the battery pack
1 Turn off the computer.
2 Slide the battery pack into the battery compartment until it clicks into place.
27
nN
Getting Started
✍
When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
!
This computer is designed to operate only with genuine Sony batteries.
Page 28
Getting Started
Charging the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of delivery.
To charge the battery pack
1 Install the battery pack.
2 Connect the AC adapter to the computer.
The computer automatically charges the battery pack (the battery indicator light flashes in a double blink pattern as the
battery pack charges). When the battery pack is about 85% charged, the battery indicator turns off.
Battery indicator light status Meaning
On The computer is using battery power.
Blinks The battery pack is running out of power.
Double blinks The battery pack is charging.
Off The computer is using AC power.
!
Charge the battery pack as described in this manual from your first battery charge.
28
nN
Page 29
Getting Started
✍
When the battery pack is running out of power, both the battery and power indicator lights blink.
Keep the battery pack in your computer while it is directly connected to AC power. The battery pack continues to charge while you are using the
computer.
If the battery level falls below 10%, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a
fully charged battery pack.
The battery pack supplied with your computer is a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack
does not affect the battery life.
The battery indicator light is on while you use the battery pack as a power source. When battery life is nearly depleted, both the battery and power
indicator lights start flashing.
For some software applications and some peripheral devices, your computer may not enter Hibernate mode even when battery life is low. To avoid loss
of data when using battery power, you should save your data frequently and manually activate a power management mode, such as Sleep or Hibernate.
If the battery pack wears out when the computer enters Sleep mode, you will lose all unsaved data. Going back to the previous work state is impossible.
To avoid loss of data, you should save your data frequently.
When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
29
nN
Page 30
Getting Started
Removing the Battery Pack
!
You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack
while the computer is in Sleep mode.
To remove the battery pack
1 Turn off the computer.
2 Slide the battery release latches (1) inwards, hold the latches, and slide the battery pack away from the computer.
30
nN
Page 31
31
nN
Getting Started
Shutting Down Your Computer Safely
To avoid losing unsaved data, be sure to shut down your computer properly, as described below.
To shut down your computer
1 Turn off any peripherals connected to the computer.
2 Click Start, the arrow next to the Lock button, and Shut Down.
3 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off
automatically.
The power indicator light turns off.
Page 32
Using Your VAIO Computer
This section describes how to get the most out of using your VAIO computer.
❑ Using the Keyboard (page 33)
❑ Using the Touch Panel (page 34)
❑ Using the Pointing Device (page 36)
❑ Using Special-function Buttons (page 38)
❑ Blocking Unintentional Operations (page 39)
❑ Using the Built-in MOTION EYE Camera (page 41)
❑ Using the Memory Stick Media (page 45)
❑ Using the Internet (page 50)
❑ Using Wireless LAN (WLAN) (page 51)
❑ Using the Bluetooth Functionality (page 59)
32
nN
Using Your VAIO Computer
Page 33
Using Your VAIO Computer
Using the Keyboard
The keyboard on your computer is located underneath the touch panel LCD screen. Slide up the screen to reveal the
keyboard as shown below for operations.
!
Keep your fingers off the screen surface while sliding up the touch panel LCD screen.
33
nN
Page 34
34
nN
Using Your VAIO Computer
Using the Touch Panel
Your computer is equipped with the touch panel LCD screen for operations with the stylus (1), including software launches.
!
Make sure to use only the supplied stylus for touch panel operations. Use of any other writing utensils, such as a ball-point pen, may damage the touch
panel surface.
Take out the stylus from the back of your computer and use it for the following actions on the touch panel LCD screen. This
stylus is extendable. Slide it out to its full length if necessary.
See Back (page 17) for the exact location of the stylus stored on the back of your computer.
Page 35
35
nN
Using Your VAIO Computer
Action Description
Tap Gently hit the stylus once against the touch panel LCD screen.
Double-tap Gently hit the stylus twice against the touch panel LCD screen.
Drag Slide the stylus gently on the touch panel LCD screen.
✍
At your very first Windows startup, you are prompted to calibrate the touch panel for smooth operations. Follow the on-screen instructions. You can
calibrate the touch panel at any time later when you feel uncomfortable with using it. Click Start, All Programs, Touch Panel, and Calibration and follow
the on-screen instructions.
You can customize your touch panel settings with VAIO Control Center to perform the right-clicking action with the stylus. See Setting Up Your
Computer with VAIO Control Center (page 114) and find out more in its help file.
Using Touch Commands
Touch commands are provided to substitute for actions that are needed to perform certain software operations. For example,
you can drag your stylus to the left to view the previous page on your active browser software.
To enable touch commands, press on the touch panel LCD screen for a few seconds. VAIO TOUCH COMMAND appears
on the desktop to indicate the commands are now available.
Some touch commands are defined by default. You can change the assignment of these default touch commands with VAIO
Control Center. See Setting Up Your Computer with VAIO Control Center (page 114) and find out more in its help file.
Page 36
36
nN
Using Your VAIO Computer
Using the Pointing Device
Your computer is equipped with a cursor-pointing device, the multi-pointer (1), to enable you to point to, select, drag, and
scroll objects on the computer screen.
Push the multi-pointer in the direction that you want to move the pointer on the screen. The harder you push the multi-pointer,
the faster moves the pointer.
The following shows the default button assignments in the horizontal orientation (left) and the vertical orientation (right).
You can use VAIO Control Center to change these button assignments. See Setting Up Your Computer with VAIO
Control Center (page 114) and find out more in its help file.
!
To enable the default button assignments in the vertical orientation, you must select on VAIO Touch Launcher.
Page 37
37
nN
Using Your VAIO Computer
Action Description
Point Push the multi-pointer (1) to place the pointer (2) on
an item or object.
Click Press the left button (3) once.
Double-click Press the left button (3) twice.
Right-click Press the right button (4) once.
Drag Push the multi-pointer (1) while pressing the left
Scroll Push the multi-pointer (1) while pressing the center
In many applications, this action displays a shortcut
menu.
button (3).
button (5).
✍
In the vertical orientation, you can press the left and right
buttons simultaneously to substitute for the center button
that is available in the standard orientation.
!
The scroll function is available only with applications that
support the scroll feature.
✍
The pointer may move on its own in rare occasions, which does not indicate a malfunction. Leave the multi-pointer untouched for a while. The pointer
will come to a halt.
The cap at the tip of the multi-pointer is a consumable. When it wears out, replace it with one of the supplied spare caps. See On Replacing the Multi-
pointer Cap (page 137) for more information on replacement.
Page 38
Using Your VAIO Computer
Using Special-function Buttons
Your computer is equipped with special buttons to help you use specific functions of the computer.
The following shows the special buttons in the horizontal orientation (left) and the vertical orientation (right).
A Launcher button
Launches VAIO Touch Launcher by default. You can change this
button assignment with VAIO Control Center. See Setting Up Your
Computer with VAIO Control Center (page 114) and find out more in
its help file.
B Zoom In/Out buttons
Make the screen view zoom in or zoom out.
Each click makes the screen view zoom in or out by 0.5 on a scale of 1
to 3 and cycles when zooming reaches its maximum or minimum level.
To restore the screen view in the actual size, click that
appears on the magnified screen view.
✍
To help you navigate on the magnified screen view, the hand tool is available to
grasp a point on the view and drag it around. To use the hand tool, click
on the magnified screen view. The pointer changes its shape to a hand-like one,
indicating that the hand tool is now selected.
38
nN
To restore the standard pointer, click .
C Rotate button
Restores the standard screen view.
Page 39
39
nN
Using Your VAIO Computer
Blocking Unintentional Operations
While you are carrying your computer around, you might press a button on the computer unintentionally and find an operation
that you never expected in progress. To block such unintentional operations, your computer is provided with the function to
lock certain components of the computer. Slide down the power switch to the HOLD position (in the opposite direction of f
on the switch) until it clicks into place. You will see the color of the hole on the power switch turns orange. Additionally, your
computer screen will display a message and go blank to conserve power.
Page 40
Using Your VAIO Computer
The components to be locked by this function are as follows:
❑ Touch panel
❑ Keyboard
❑ Left button
❑ Right button
❑ Center button
❑ Launcher button
❑ Multi-pointer
❑ Zoom In/Out buttons
❑ CAPTURE button
❑ Fingerprint sensor
✍
Activating this function will turn off the touch panel LCD screen and the screen will go blank. To bring your computer back into Normal mode, slide up
the power switch (in the direction of f on the switch).
40
nN
Page 41
41
nN
Using Your VAIO Computer
Using the Built-in MOTION EYE Camera
Your computer is equipped with two built-in MOTION EYE cameras: front camera (MOTION EYE) (1) and rear camera
(MOTION EYE) (2). These cameras are not designed for simultaneous use, so you must first select the one that is suitable
for your purpose, using VAIO Camera Utility. This utility will automatically launch when you start the software that uses the
camera. For more information on VAIO Camera Utility, see the help file on the software.
❑ Front camera (MOTION EYE) (1)
Use this camera for video conferences with instant messaging software.
❑ Rear camera (MOTION EYE) (2)
Use this camera for capturing still images and movies with VAIO Camera Capture Utility. For the detailed operation
instructions, see the help file on VAIO Camera Capture Utility.
Page 42
42
nN
Using Your VAIO Computer
!
VAIO Camera Capture Utility does not allow parallel use of the camera by any other software. Make sure to exit such software before capturing still
images and movies with VAIO Camera Capture Utility.
You cannot use the front and rear cameras at the same time.
When the screen view is rotated, the front and rear cameras are both disabled.
To use the rear camera (MOTION EYE), make sure to slide up the touch panel LCD screen.
The finder view on the main window shows mirrored image streams. This is normal and captured still images will not be mirrored.
The finder view on the main window may show some noise, for example horizontal streaks, if you view a rapid-moving object. This is normal and does
not indicate a malfunction.
You cannot operate the built-in MOTION EYE camera with the Microsoft Windows MovieMaker software.
Page 43
Using Your VAIO Computer
Capturing Still Images
To capture a still image
1 Press the CAPTURE button on your computer to launch VAIO Camera Capture Utility.
2 Click the Still icon in the right pane of the utility's main window.
3 Turn the camera to your subject.
4 For macro closeup capturing, slide the focus selection switch to the position.
!
The focus selection switch is only effective for the rear camera (MOTION EYE).
The focusing distance for closeup capturing is approximately 2.8 inches (7 cm) from the lens.
5 Press the CAPTURE button on your computer.
The current image in the finder view is captured and its thumbnail image is added to the thumbnail view at the bottom of
the main window.
✍
VAIO Camera Capture Utility provides many more features. See the help file on the software for more information.
43
nN
Page 44
Capturing Movies
To capture a movie
1 Press the CAPTURE button on your computer to launch VAIO Camera Capture Utility.
2 Click the Movie icon in the right pane of the utility's main window.
3 Turn the camera to your subject.
4 For macro closeup capturing, slide the focus selection switch to the position.
!
The focus selection switch is only effective for the rear camera (MOTION EYE).
The focusing distance for closeup capturing is approximately 2.8 inches (7 cm) from the lens.
5 Press the CAPTURE button on your computer to start movie recording.
6 When finished, press the CAPTURE button once again to stop movie recording.
The first scene of the captured movie is added to the thumbnail view at the bottom of the main window.
✍
VAIO Camera Capture Utility provides many more features. See the help file on the software for more information.
44
nN
Using Your VAIO Computer
Page 45
45
nN
Using Your VAIO Computer
Using the Memory Stick Media
Memory Stick media is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing
digital data with compatible products, such as digital cameras, mobile phones and other devices. Because it is removable, it
can be used for external data storage.
Before You Use the Memory Stick Media
The Memory Stick slot on your computer can accommodate only Duo-size media and support Memory Stick PRO and
Memory Stick PRO-HG Duo media with high speed and high capacity capabilities.
!
Before using a Memory Stick Micro media, be sure to insert it into an M2 Duo-size Adaptor. If you insert the media directly into the Memory Stick slot
without the Adaptor, you may not be able to remove it from the slot.
For the latest information about the Memory Stick media, visit the Memory Stick Web site at http://www.memorystick.com/en/.
!
Your computer has been tested and found compatible with Sony branded Memory Stick media with capacity of up to 8 GB that are available as of May
2007. However, not all Memory Stick media that meet the same specifications as the compatible media are guaranteed of compatibility.
Inserting a Memory Stick media with multiple conversion adapters is not guaranteed of compatibility.
MagicGate is the general name of the copyright protection technology developed by Sony. Use a Memory Stick media with the MagicGate logo to use
this feature.
Besides for your personal use, it is against the copyright law to use any audio and/or image data you recorded without prior consent from the respective
copyright holders. Accordingly, Memory Stick media with such copyrighted data can be used only within the law.
The Memory Stick slot on your computer does not support 8-bit parallel data transfer (high speed data transfer).
Page 46
nN
Using Your VAIO Computer
Inserting a Memory Stick Media
To insert a Memory Stick media
1 Hold the Memory Stick media so that the arrow surface of the media and the front of the computer face in the same
direction and the arrow points toward the Memory Stick slot.
2 Carefully slide the Memory Stick media into the slot until it clicks into place.
The Memory Stick media is automatically detected by your system and the content of the Memory Stick media is
displayed. If nothing appears on the desktop, click Start, Computer, and double-click the Memory Stick media icon.
!
Be sure to hold the Memory Stick media with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer
or the Memory Stick media, do not force the Memory Stick media into the slot if you cannot insert it smoothly.
46
Do not insert more than one Memory Stick media into the slot. Improper insertion of the media may damage both your computer and the media.
To view the contents of the Memory Stick media
1 Click Start and Computer to open the Computer window.
2 Double-click the Memory Stick media icon to view the list of data files saved in the Memory Stick media.
Page 47
Using Your VAIO Computer
To format a Memory Stick media
The Memory Stick media has been formatted in the factory default setting and is ready for use.
If you want to reformat the media with your computer, follow these steps.
!
Be sure to use the device that is designed to format the media and supports the Memory Stick media when formatting the media.
Formatting the Memory Stick media erases the entire data on the media. Before formatting the media, make sure that it does not contain your valuable
data.
Do not remove the Memory Stick media from the slot while formatting the media. This could cause a malfunction.
1 Carefully slide the Memory Stick media into the slot until it clicks into place.
2 Click Start and Computer to open the Computer window.
3 Right-click the Memory Stick media icon and select Format.
4 Click Restore device defaults.
!
The size of the allocation unit and file system may change.
Do not select NTFS from the File system drop-down list as it may cause a malfunction.
47
nN
✍
The formatting process will be completed more quickly if you select Quick Format in Format options.
Page 48
5 Click Start.
6 At the confirmation prompt, click OK.
The formatting process starts.
!
It may take time to format the Memory Stick media depending on the media.
7 Once completed, click OK.
8 Click Close.
48
nN
Using Your VAIO Computer
Page 49
Using Your VAIO Computer
Removing a Memory Stick Media
To remove a Memory Stick media
1 Check that the Memory Stick indicator is off.
2 Push the Memory Stick media in toward the computer.
The Memory Stick media ejects.
3 Pull the Memory Stick media out of the slot.
!
Always remove the Memory Stick media gently, or it may pop out unexpectedly.
Do not remove the Memory Stick media while the Memory Stick indicator is on. If you do, you may lose data. Large volumes of data may take time to
load, so be sure the indicator is off before removing the Memory Stick media.
49
nN
Page 50
50
nN
Using Your VAIO Computer
Using the Internet
To use the Internet, you need to connect an external modem device, for example a USB telephone modem, an xDSL modem,
or a cable modem, to your computer. For the detailed instructions on connection setups and modem configuration, see the
manual that came with your modem.
You may also access the Internet through your wireless WAN network. See the SmartWi Connection Utility Help for more
information.
Page 51
51
nN
Using Your VAIO Computer
Using Wireless LAN (WLAN)
Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each
other through a network. A WLAN is a network in which a user can connect to a Local Area Network (LAN) through a wireless
(radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.
The Sony WLAN supports all normal Ethernet connectivity, but with the added benefits of mobility and roaming. You can still
access information, Internet/intranet and network resources, even in the middle of a meeting, or as you move from one place
to another.
You can communicate without an access point, which means that you can communicate with a limited number of computers
(ad-hoc). Or you can communicate through an access point, which allows you to create a full infrastructure network.
❑ Customers in USA
See the SmartWi Connection Utility Help for setting up wireless LAN and wireless WAN functionalities. For instructions
on how to access the SmartWi Connection Utility Help, see Non-printed Documentation (page 8).
❑ Customers in other countries or areas
See the following for setting up wireless LAN functionality.
Page 52
52
nN
Using Your VAIO Computer
✍
In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the
WLAN functionality, read the Safety Information carefully.
*
WLAN uses the IEEE 802.11a
the encryption methods: Wired Equivalent Privacy (WEP), which is a security protocol, Wi-Fi Protected Access 2 (WPA2), and Wi-Fi Protected Access
(WPA). Proposed jointly by the IEEE and Wi-Fi Alliance, both WPA2 and WPA are specifications of standards based, interoperable security
enhancements that increase the level of data protection and access control for existing Wi-Fi networks. WPA has been designed to be forward
compatible with the IEEE 802.11i specification. It utilizes the enhanced data encryption TKIP (Temporal Key Integrity Protocol) in addition to user
authentication using 802.1X and EAP (Extensible Authentication Protocol). Data encryption protects the vulnerable wireless link between clients and
access points. Besides that, there are other typical LAN security mechanisms to ensure privacy, such as: password protection, end-to-end encryption,
virtual private networks, and authentication. WPA2, the second generation of WPA, provides stronger data protection and network access control and
is also designed to secure all versions of 802.11 devices, including 802.11b, 802.11a, 802.11g, and 802.11n, multi-band and multi-mode. In addition,
based on the ratified IEEE 802.11i standard, WPA2 provides government grade security by implementing the National Institute of Standards and
Technology (NIST) FIPS 140-2 compliant AES encryption algorithm and 802.1X-based authentication. WPA2 is backward compatible with WPA.
* See the online Specifications to see whether your model supports the IEEE 802.11a standard and/or the draft form of the IEEE 802.11n standard.
IEEE 802.11b/g is a wireless LAN standard, using the 2.4 GHz bandwidth. The IEEE 802.11g standard provides high-speed communications, faster than
the IEEE 802.11b standard.
IEEE 802.11a is a wireless LAN standard, using the 5 GHz bandwidth, and provides high-speed communications of up to 54 Mbps.
IEEE 802.11n is a wireless LAN standard, using the 2.4 or 5 GHz bandwidth, and provides high-speed communications of up to 300 Mbps
* Actual communication speed varies depending on your access point settings and so on.
Your computer may employ the Intel
IEEE 802.11n standard.
* Employed only on models that support the draft form of the IEEE 802.11n standard.
/b/g standard or the draft form of the IEEE 802.11n* standard, which specifies the used technology. The standard includes
*
.
®
Next-Gen Wireless-N technology* compliant with the IEEE 802.11a/b/g standard and the draft form of the
Page 53
53
nN
Using Your VAIO Computer
Wireless LAN devices using the 2.4 GHz bandwidth and the ones using the 5 GHz bandwidth cannot communicate with each other because the
frequencies are different.
The 2.4 GHz bandwidth used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference
from other devices that use the same bandwidth are employed on wireless LAN compatible devices, such interference may cause lower communication
speed, narrower communication range, or broken wireless connections.
The communication speed varies depending on the distance between communication devices, existence of obstacles between such devices, the device
configuration, the radio conditions, and the software in use. In addition, communications may be cut off depending on the radio conditions.
The communication range varies depending on the actual distance between communication devices, existence of obstacles between such devices, the
radio conditions, the ambient environment that includes existence of walls and materials of such walls, and the software in use.
Deploying IEEE 802.11b and IEEE 802.11g products on the same wireless network may reduce the communication speed due to radio interference.
Taking this into consideration, the IEEE 802.11g products are designed to reduce the communication speed to ensure communications with
IEEE 802.11b products. When the communication speed is not as fast as expected, changing the wireless channel on the access point may increase
the communication speed.
Page 54
54
nN
Using Your VAIO Computer
Communicating without an Access Point (Ad-hoc)
An ad-hoc network is a network in which a LAN is created only by the wireless devices themselves, with no other central
controller or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc
network easily at home.
❑ If the wireless connection is initiated by the VAIO computer, channel 11 will be selected.
❑ If the wireless connection is initiated by peer wireless LAN equipment, the wireless LAN communication will make use of
the channel selected by the peer wireless LAN equipment.
Page 55
Using Your VAIO Computer
To communicate without an access point (ad-hoc)
!
You cannot select the 5 GHz bandwidth, which is used for the IEEE 802.11a standard, on ad-hoc networks.
The IEEE 802.11n standard, using the 2.4 or 5 GHz bandwidth, is not available on ad-hoc networks.
1 Turn on the WIRELESS or WIRELESS LAN switch.
The Wireless LAN indicator lights up.
2 Double-click ( / ) on the taskbar to display the Wireless Device Switch window.
3 Select your desired wireless option(s) and click OK.
4 Click Start and Control Panel.
5 Click View network status and tasks under Network and Internet.
6 Click Set up a connection or network on the left pane.
The Set up a connection or network window appears.
7 Select an option to specify the ad-hoc network settings and click Next.
8 Follow the on-screen instructions.
✍
See the online Specifications to see whether your model supports the Bluetooth functionality, the IEEE 802.11a/b/g standard, and/or the draft form of
the IEEE 802.11n standard.
55
nN
Page 56
56
nN
Using Your VAIO Computer
Communicating with an Access Point (Infrastructure)
An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access
point (not supplied), for example the Sony Access Point. The access point bridges the wireless and wired LAN and acts as a
central controller for the wireless LAN. The access point coordinates transmission and reception from multiple wireless
devices within a specific range.
The access point will select which channel to use on an infrastructure network.
!
For details on how to select the channel that will be used by the access point, see the manual that came with your access point.
Page 57
Using Your VAIO Computer
To connect to a wireless network
1 Make sure an access point is set up.
See the manual that came with your access point for more information.
2 Turn on the WIRELESS or WIRELESS LAN switch.
The Wireless LAN indicator lights up.
3 Double-click ( / ) on the taskbar to display the Wireless Device Switch window.
4 Select your desired wireless option(s) and click OK.
5 Right-click or on the taskbar and select Connect to a network.
6 Select the desired access point and click Connect.
✍
See the online Specifications to see whether your model supports the Bluetooth functionality, the IEEE 802.11a/b/g standard, and/or the draft form of
the IEEE 802.11n standard.
57
nN
Page 58
Using Your VAIO Computer
Stopping Wireless LAN Communication
To stop wireless LAN communication
Turn off the WIRELESS or WIRELESS LAN switch.
!
Turning off the wireless LAN functionality while accessing remote documents, files, or resources may result in data loss.
✍
For WPA-PSK or WPA2-PSK authentication, you must enter a passphrase. The passphrase is case sensitive and must be between 8 and 63
alphanumeric characters long or up to 64 characters long using numbers from 0 to 9 and letters from A to F.
58
nN
Page 59
59
nN
Using Your VAIO Computer
Using the Bluetooth Functionality
You can establish wireless communication between your computer and other Bluetooth devices such as another computer
or a mobile phone. You can transfer data between these devices without cables and up to 33 feet (10 meters) range in open
space.
❑ Customers in USA
See the SmartWi Connection Utility Help for setting up Bluetooth functionality. For instructions on how to access the
SmartWi Connection Utility Help, see Non-printed Documentation (page 8).
❑ Customers in other countries or areas
See the following for setting up Bluetooth functionality.
To start Bluetooth communications
1 Turn on the WIRELESS switch.
2 Double-click ( / ) on the taskbar to display the Wireless Device Switch window.
3 Select the Enable Bluetooth Device option.
4 Click OK.
Page 60
60
nN
Using Your VAIO Computer
Notes on using the Bluetooth functionality
❑ The data transfer rate varies, depending on the following conditions:
❑ Obstacles, such as walls, located between devices
❑ Distance between devices
❑ Material used in walls
❑ Proximity to microwaves and cordless telephones
❑ Radio frequency interference and other environmental conditions
❑ Device configuration
❑ Type of software application
❑ Type of operating system
❑ Use of both wireless LAN and Bluetooth functionalities at the same time on your computer
❑ Size of file being exchanged
❑ Note that due to limitations of the Bluetooth standard, large files may occasionally be corrupted during continuous transfer
due to electromagnetic interference in the environment.
❑ All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained. Even if
standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange
may not be possible in all situations.
❑ As general characteristics of Bluetooth technology, video and audio may go out of synchronization if you play videos on
your computer with audio output from the connected Bluetooth device.
Page 61
61
nN
Using Your VAIO Computer
❑ The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth
devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous
use of the Bluetooth functionality and wireless communication devices, however, may cause radio interference and result
in poorer communication speeds and distances than the standard values.
❑ The Bluetooth functionality may not work depending on the third party devices or the software version used by third party
companies.
❑ As general characteristics of Bluetooth technology, connecting multiple Bluetooth devices to your computer may cause
bandwidth congestion, resulting in poor performance of the devices.
Page 62
62
nN
Using Your VAIO Computer
Bluetooth Security
The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to
communicate. With the authentication function, you can avoid any anonymous Bluetooth device to access your computer.
The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be
determined for both devices to be registered. Once a device is registered, there is no need to re-enter the passkey.
✍
The passkey can be different each time, but must be the same at both ends.
For certain devices, such as a mouse, no passkey can be entered.
Page 63
nN
Using Your VAIO Computer
Communicating with Another Bluetooth Device
You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a
mouse, or a digital camera without the use of any cables.
63
To communicate with another Bluetooth device
To communicate with another Bluetooth device, you need first to set up the Bluetooth functionality. For setting up and using
the Bluetooth functionality, see the help file on the Bluetooth utility software.
To see the help file
Right-click the Bluetooth icon on the taskbar and select Help.
Page 64
Stopping Bluetooth Communications
To stop Bluetooth communications
Turn off the WIRELESS switch. The Bluetooth indicator turns off.
64
nN
Using Your VAIO Computer
Page 65
65
nN
Using Your VAIO Computer
Using the Bluetooth Headset
The Bluetooth headset (not supplied) will come in handy during a video conference over the Internet using instant messaging
software. For details on using the Bluetooth headset, see the manual that came with your Bluetooth headset.
To connect the headset with your computer
1 Press and hold the headset power button for at least five seconds to turn on the Bluetooth headset.
2 Press and hold the volume buttons for at least five seconds until the indicator light blinks in red and green.
3 Right-click the Bluetooth icon on the taskbar and select Bluetooth Settings.
The Bluetooth Settings window appears and Add New Connection Wizard automatically starts.
4 If the Add New Connection Wizard window does not appear, click New Connection.
The Add New Connection Wizard window appears.
5 Select Express Mode (Recommended) and click Next.
The wizard searches for Bluetooth devices in range and lists available devices, if any.
6 Select the device name for your Bluetooth headset and click Next.
The Bluetooth Manager-Bluetooth Security window appears when a connection is established.
7 Enter "0000" for Bluetooth Passkey (PIN) and click OK.
8 Click Next.
The headset icon appears in the Bluetooth Settings window.
9 Right-click the icon and select Connect.
Page 66
To disconnect the headset from your computer
1 Right-click the Bluetooth icon on the taskbar and select Bluetooth Settings.
The Bluetooth Settings window appears.
2 Right-click the headset icon and select Disconnect.
3 Click Yes .
66
nN
Using Your VAIO Computer
Page 67
Using Peripheral Devices
You can add functionality to your VAIO computer by using the various ports on the computer.
❑ Connecting the Port Replicator (page 68)
❑ Connecting the Display/LAN Adapter (page 74)
❑ Connecting an Optical Disc Drive (page 75)
❑ Connecting External Speakers (page 78)
❑ Connecting an External Display (page 79)
❑ Selecting Display Modes (page 84)
❑ Using the Multiple Monitors Function (page 85)
❑ Connecting an External Microphone (page 87)
❑ Connecting a Universal Serial Bus (USB) Device (page 88)
❑ Connecting a Printer (page 91)
❑ Connecting an i.LINK Device (page 92)
❑ Connecting to a Network (LAN) (page 93)
67
nN
Using Peripheral Devices
Page 68
nN
Using Peripheral Devices
Connecting the Port Replicator
Attaching the supplied port replicator enables you to connect additional peripherals to your computer, such as an i.LINK
device and an external display.
68
Page 69
Locating Ports on the Port Replicator
69
nN
Using Peripheral Devices
i.LINK (IEEE 1394) S400 port (page 92)
A
B MONITOR (VGA) port (page 79)
C Hi-Speed USB (USB 2.0) ports
*
(page 88)
D Network (Ethernet) port (100BASE-TX / 10BASE-T) (page 93)
E DC IN port (page 70)
F DC IN indicator
G AV Out jack (page 81)
H Hi-Speed USB (USB 2.0) port
* Support high-/full-/low- speeds.
*
(page 88)
!
The port replicator can be powered only through the AC adapter supplied with your computer. Do not unplug the AC adapter from the port replicator
and the AC outlet while using the port replicator; this may cause data damage or hardware malfunctions.
Page 70
Attaching Your Computer to the Port Replicator
To attach your computer to the port replicator
!
To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the port replicator.
1 Disconnect all peripherals from the computer.
2 Attach the guide holder (1) to the port replicator.
70
nN
Using Peripheral Devices
Page 71
3 Plug one end of the power cord (2) into the AC adapter (3) and the other end into an AC outlet.
4 Plug the cable attached to the AC adapter (3) into the DC IN port (4) on the port replicator (5).
71
nN
Using Peripheral Devices
Page 72
5 Slide down the computer along the guide holder until it is fixed on the port replicator.
6 Turn on the computer.
!
Use the AC adapter supplied with your computer.
72
nN
Using Peripheral Devices
Keep the battery pack installed on your computer when attaching the computer to the port replicator.
Do not move your computer while attached to the port replicator; this may detach the port replicator and cause damage to the port replicator and the
computer.
Page 73
Disconnecting Your Computer from the Port Replicator
!
To prevent loss of unsaved data, be sure to turn off your computer before disconnecting it from the port replicator.
To disconnect your computer from the port replicator
1 Turn off the computer and the connected peripherals.
2 Slide the computer up along the guide holder and away from the port replicator.
73
nN
Using Peripheral Devices
✍
To disconnect the port replicator completely from AC power, unplug the AC adapter.
Page 74
74
nN
Using Peripheral Devices
Connecting the Display/LAN Adapter
Connect the supplied display/LAN adapter (1) to the I/O connector (2) on the bottom of your computer to expand connectivity
to the computer.
The display/LAN adapter has the following ports:
A AV Out jack (page 81)
B Monitor (VGA) port (page 79)
C Network (Ethernet) port (100BASE-TX / 10BASE-T) (page 93)
Page 75
75
nN
Using Peripheral Devices
Connecting an Optical Disc Drive
To use optical CDs and DVDs with your computer, you need to connect an external optical disc drive (not supplied) via the
port replicator.
Connecting an Optical Disc Drive
!
Be sure to connect an external optical disc drive before you launch any preinstalled CD/DVD software.
Page 76
76
nN
Using Peripheral Devices
To connect an optical disc drive
1 Attach your computer to the port replicator.
See Attaching Your Computer to the Port Replicator (page 70).
2 Plug one end of an i.LINK cable (not supplied) (1) to an external optical disc drive (not supplied) (2), and the other end to
the i.LINK port (3) on the back of the port replicator.
3 Connect the external optical disc drive (2) to a AC power source (4) with an AC adapter.
See the manual that came with your external optical disc drive for the detailed instructions on connecting the i.LINK cable
and the AC adapter to the drive.
Page 77
77
nN
Using Peripheral Devices
Disconnecting an Optical Disc Drive
You can disconnect an optical disc drive when your computer is on or off. Disconnecting the drive when the computer is in a
power saving mode (Sleep or Hibernate) may cause the computer to malfunction.
To disconnect an optical disc drive
✍
To disconnect an optical disc drive when your computer is off, skip steps 1 to 7.
1 Close all software applications accessing the optical disc drive.
2 Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.
3 Select the optical disc drive you want to disconnect.
4 Click Stop.
The Stop a Hardware device window appears.
5 Make sure the optical disc drive is selected, and click OK.
A message appears stating it is now safe to remove the hardware device.
6 Click OK.
7 Click Close to close the Safely Remove Hardware window.
8 Disconnect the optical disc drive from the computer.
Page 78
Connecting External Speakers
You can enhance the sound quality of your computer by connecting external speakers.
To connect external speakers
1 Plug the speaker cable (1) into the headphones jack (2) i.
2 Plug the other end of the speaker cable to the external speaker (3).
3 Turn down the volume of the speakers before you turn them on.
✍
Make sure your speakers are designed for computer use.
78
nN
Using Peripheral Devices
!
Do not place floppy disks on the speakers; their magnetic field may damage the data on the disks.
Page 79
79
nN
Using Peripheral Devices
Connecting an External Display
You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer
display or a projector.
✍
Connect the power cord after connecting all other cables.
Connected external displays are used as secondary screens.
On the Windows operating system, you can also use an external display to set up multiple monitors.
Connecting a Computer Display
You need the supplied port replicator or display/LAN adapter to connect a computer display to your computer.
To connect a computer display
1 If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.
2 Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the port replicator or on the display/LAN
adapter.
Page 80
80
nN
Using Peripheral Devices
Connecting a Multimedia Computer Display
You need the supplied port replicator or display/LAN adapter to connect a multimedia computer display to your computer.
To connect a multimedia computer display
1 Plug the power cord of your multimedia computer display (1) into an AC outlet.
2 Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the port replicator or on the display/LAN
adapter.
3 Plug the speaker cable (4) into the headphones jack (5) i on the computer.
4 Plug the microphone cable (6) into the microphone jack (7) m on the computer.
Page 81
81
nN
Using Peripheral Devices
Connecting a TV
You need the supplied port replicator or display/LAN adapter to connect a TV to your computer.
To connect a TV to your computer
1 Plug the power cord of your TV (1) into an AC outlet.
2 Plug one end of an audio/video cable (2) into the AV Out jack (3) T on the port replicator or on the display/LAN adapter
and the other to the TV.
3 Switch the input channel of the TV to external input.
4 Set up the TV configuration system.
Page 82
Using Peripheral Devices
✍
You need to use an AV cable that has a minijack connector on one end and 3 RCA (also called cinch) connectors on the other end. If your TV does not
have RCA connectors but has a SCART connector, you need an RCA to SCART converter. If your computer has an S VIDEO port, you can use this port
as an alternative means of connection.
See the manual that came with your peripheral for more information on installation and use.
If the display resolution of your computer is more than 1024 x 768 pixels, a part of the image cannot be displayed on your TV. If you want to display
the full image, change the display resolution of the computer to 1024 x 768 pixels or lower.
82
nN
Page 83
83
nN
Using Peripheral Devices
Connecting a Projector
You need the supplied port replicator or display/LAN adapter to connect a projector (for example, the Sony LCD projector) to
your computer.
To connect a projector
1 Connect the power cord (1) of your projector into an AC outlet.
2 Plug an RGB signal cable (2) (not supplied) into the monitor (VGA) port (3) a on the port replicator or on the display/LAN
adapter.
3 Plug an audio cable (4) (not supplied) into the headphones jack (5) i on the computer.
4 Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).
Page 84
84
nN
Using Peripheral Devices
Selecting Display Modes
You can select which display to be used as the primary monitor when an external display (desktop monitor, etc.) is connected
to your computer.
If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors
Function (page 85) for more information.
To select a display
1 Right-click on the desktop and select Personalize.
2 Click Display Settings.
The Display Settings window appears.
3 Follow the on-screen instructions to change the settings.
✍
You may not be able to display the same contents on your computer screen and the external display or projector at the same time, depending on the
type of your external display or projector.
Before turning on your computer, turn on the peripheral devices.
You can alternatively select a display with VAIO Touch Launcher. See the help file on the software for more information.
Page 85
85
nN
Using Peripheral Devices
Using the Multiple Monitors Function
The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you
have an external display connected to the monitor (VGA) port, your computer screen and the external display can function
as a single desktop.
You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window
or a toolbar, from one display to the other.
✍
Your external display may not support the Multiple Monitors function.
Certain software applications may not be compatible with Multiple Monitors settings.
Make sure that your computer does not enter Sleep or Hibernate mode while you are using Multiple Monitors mode; otherwise the computer may not
return to Normal mode.
If you set different colors on each display, do not expand a single window across two displays; otherwise your software may not work properly.
Set fewer colors or a lower resolution for each display.
Page 86
To select the Multiple Monitors mode
1 Right-click on the desktop and select Personalize.
2 Click Display Settings.
The Display Settings window appears.
3 Follow the on-screen instructions to change the settings.
✍
Additionally, you can set the display colors and resolution for each display and customize the Multiple Monitors mode.
86
nN
Using Peripheral Devices
Page 87
87
nN
Using Peripheral Devices
Connecting an External Microphone
If you need to use a sound input device (for example, to chat over the Internet), you need to plug in an external microphone
(not supplied).
To connect an external microphone
Plug the microphone cable (1) into the microphone jack (2) m.
✍
Make sure your microphone is designed for computer use.
Page 88
Using Peripheral Devices
Connecting a Universal Serial Bus (USB) Device
To prevent your computer and/or USB devices from damage, observe the following:
❑ When moving the computer with USB devices connected, avoid any shock or force to the USB ports.
❑ Do not put the computer into a bag or carrying case when it has USB devices connected.
Connecting a USB Mouse
To connect a USB mouse
1 Choose the USB port (1) you prefer to use.
2 Plug the USB mouse cable (2) into the USB port.
You can now use your USB mouse (not supplied) (3).
88
nN
Page 89
Connecting a USB Floppy Disk Drive
You can purchase a USB floppy disk drive and connect it to your computer.
To connect a USB floppy disk drive
1 Choose the USB port (1) you prefer to use.
2 Plug the USB floppy disk drive cable (2) into the USB port.
Your USB floppy disk drive (3) is now ready for use.
!
When using a USB floppy disk drive, do not apply force on the USB port. This may cause a malfunction.
89
nN
Using Peripheral Devices
Page 90
90
nN
Using Peripheral Devices
Disconnecting a USB floppy disk drive
You can disconnect a USB floppy disk drive when your computer is on or off. Disconnecting the drive when the computer is
in a power saving mode (Sleep or Hibernate) may cause the computer to malfunction.
To disconnect a USB floppy disk drive
✍
To disconnect a USB floppy disk drive when your computer is off, skip steps 1 to 8.
1 Close all programs accessing the floppy disk drive.
2 Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.
3 Select the floppy disk drive you want to unplug.
4 Click Stop.
The Stop a Hardware device window appears.
5 Confirm that the floppy disk drive can be safely removed from the system.
6 Click OK.
A message appears stating it is now safe to remove the hardware device.
7 Click OK.
8 Click Close to close the Safely Remove Hardware window.
9 Disconnect the floppy disk drive from the computer.
Page 91
Using Peripheral Devices
Connecting a Printer
You can connect a Windows-compatible printer to your computer to print documents.
Connecting a Printer Using the USB Port
You can connect a USB printer compatible with your version of Windows to the computer.
To connect a printer using the USB port
1 Plug the power cord (1) of your printer into an AC outlet.
2 Choose the USB port (3) you prefer to use.
3 Plug one end of a USB printer cable (2) (not supplied) into the USB port and the other end to your printer.
91
nN
Page 92
92
nN
Using Peripheral Devices
Connecting an i.LINK Device
Notes on connecting i.LINK devices
❑ You need the supplied port replicator to connect an i.LINK device, such as a digital video camcorder.
❑ The i.LINK port on the port replicator does not supply power to external devices generally powered by i.LINK ports.
❑ The i.LINK port supports transfer rates up to 400 Mbps; however, the actual transfer rate depends on the transfer rate of
the external device.
❑ The optional i.LINK cables may not be available in some countries or areas.
❑ An i.LINK connection with other compatible devices is not fully guaranteed.
❑ The i.LINK connection varies depending on the software applications, operating system, and i.LINK-compatible devices
you use. See the manual that came with your software for more information.
❑ Check the working conditions and operating system compatibility of i.LINK-compatible PC peripherals (for example, an
HDD or a CD-RW drive) before you connect them to your computer.
Connecting a Digital Video Camcorder
The connection and video import procedures vary depending on the digital video camcorder and the software that you use.
See the manual that came with your digital video camcorder for the detailed instructions.
Page 93
93
nN
Using Peripheral Devices
Connecting to a Network (LAN)
You need the supplied port replicator or display/LAN adapter to connect your computer to 100BASE-TX/10BASE-T-type
networks with an Ethernet network cable. Connect one end of a network cable (not supplied) to the network (Ethernet) port
on the port replicator or on the display/LAN adapter and the other end to your network. For detailed settings and devices
needed to connect to the network, ask your network administrator.
✍
Your computer can be connected to the network with the default settings.
!
Telephone lines cannot be connected to the network (LAN) connector on your computer.
If the network (LAN) connector is connected to the telephone lines mentioned below, high electric current to the connector may cause damage,
overheating, or fire.
- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)
- Public telephone subscriber line
- PBX (private branch exchange)
Do not plug a telephone cable into the network port.
Page 94
94
nN
Customizing Your VAIO Computer
Customizing Your VAIO Computer
This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn
how to use and customize the look of your Sony software and utilities, etc.
❑ Setting the Password (page 95)
❑ Using Fingerprint Authentication (page 106)
❑ Setting Up Your Computer with VAIO Control Center (page 114)
❑ Using the Power Saving Modes (page 115)
❑ Managing Power with VAIO Power Management (page 119)
Page 95
95
nN
Customizing Your VAIO Computer
Setting the Password
In addition to the Windows password, you can use BIOS functions to set two types of passwords to protect your computer:
power-on password and hard disk password.
Once you have set the power-on password, you will be prompted to enter the password after the VAIO logo appears to start
your computer. The power-on password allows you to protect your computer from unauthorized access.
The hard disk password provides additional security for the data stored on your built-in flash memory storage. If you set the
hard disk password, other users will not be able to access the data without knowing the password, even if the passwordprotected flash memory storage is removed from your computer and is installed in another computer.
Adding the Power-on Password
The power-on password is provided to protect your computer from unauthorized access.
There are two types of the power-on password: machine password and user password. The machine password is provided
for users with administrator rights on the computer to change all the setup options in the BIOS setup screen, as well as to
start the computer. The user password is provided for the standard users to allow for changing some of the BIOS setup
options, as well as starting the computer. To set the user password, you must first set the machine password.
!
Once you have set the power-on password, you cannot start your computer without entering the password. Make sure not to forget the password. Write
down your password and keep it safe and private from other people.
If you forget the power-on password and need assistance to reset it, a password reset fee will be charged, and your computer may need to be sent in
for depot service for password reset.
✍
If you have set the power-on password in conjunction with the fingerprint authentication functionality, you can substitute fingerprint authentication for
password entry when turning on your computer. For more information, see Using Fingerprint Authentication (page 106).
Page 96
96
nN
Customizing Your VAIO Computer
To add the power-on password (machine password)
1 Turn on the computer.
2 Press and hold the Fn key and press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer, press and hold the Fn key and press F2 key several times
when the VAIO logo appears.
3 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press
the Enter key.
4 On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters (including spaces) long.
5 Select Password when Power On under Security.
Press the space bar to change the setting from Disabled to Enabled.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Page 97
97
nN
Customizing Your VAIO Computer
To add the power-on password (user password)
!
Make sure you set the machine password before setting the user password.
1 Turn on the computer.
2 Press and hold the Fn key and press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer, press and hold the Fn key and press F2 key several times
when the VAIO logo appears.
3 Enter the machine password and press the Enter key.
4 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.
5 On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters (including spaces) long.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Page 98
98
nN
Customizing Your VAIO Computer
Changing/Removing the Power-on Password
To change or remove the power-on password (machine password)
1 Turn on the computer.
2 Press and hold the Fn key and press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer, press and hold the Fn key and press F2 key several times
when the VAIO logo appears.
3 Enter the machine password and press the Enter key.
4 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press
the Enter key.
5 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Page 99
99
nN
Customizing Your VAIO Computer
To change or remove the power-on password (user password)
1 Turn on the computer.
2 Press and hold the Fn key and press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer, press and hold the Fn key and press F2 key several times
when the VAIO logo appears.
3 Enter the user password and press the Enter key.
4 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.
5 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Page 100
100
nN
Customizing Your VAIO Computer
Adding the Hard Disk Password
The hard disk password provides additional security for the data stored on your built-in flash memory storage. If you enable
the hard disk password, this adds an extra level of security.
When adding the hard disk password, you must set both the master and user passwords. The master password is provided
for users with administrator rights on the computer to reset the user password in the BIOS setup screen. The user password
is provided to lock your built-in flash memory storage. Once you set the user password, you will have to enter the password
along with the power-on password (if set), after the VAIO logo appears.
!
You cannot start your computer with the master password.
If you forget the master password or the keyboard fails, which is critical to password entry, no bypass is possible and the data stored on the built-in
flash memory storage will not be accessible. There is NO RESET of this password. You will have to replace the built-in flash memory storage at your
own expense and lose all the data originally stored on the built-in flash memory storage. Be sure to write down the master password and keep it safe
and private from other people.
✍
If you have set the hard disk password in conjunction with the fingerprint authentication functionality, you can substitute fingerprint authentication for
password entry when turning on your computer. For more information, see Using Fingerprint Authentication (page 106).
Loading...