Sony VGN-UX380N, VGN-UX280P Replacement Instructions

Cingular SIM Card

OU S

UX Series - Replacement Instructions

These easy instructions are intended to guide you through the replacement process.

9 To avoid electric shock please make sure product is turned off and AC Adapt or is disconnected

* Sony is not responsible for any loss of data associated with your computer or an y damage caused by incorrect handling of the computer under these procedures. The terms of your Sony Limited Warranty continue to apply.

from the power source. Remove jewelry before you begin work to av oid scratching the surface o f your notebook computer.*

9 Place your notebook computer on a clean, stable and covered surface to avoid damage to the

computer's case.*

9 Follow the ESD (Electrostatic Discharge) damage prevention instructions:

o Hold parts by the edges, away from exposed circuitry when possible. o Do not walk around excessively as this promotes static build-up.

9 The appearance of the electronic components shown in the illustrations may be different from the

components shipped. This slight difference does not affect the accuracy of these instructions.

PLEA

E READ BEFORE Y

IMPORTANT!

TART

REMOVE SCREW

PLASTIC

LEFT EDGE

Step 1. Prepare the Computer.

CAUTION: Make sure the computer is turned off, and the AC Adapter is disconnected.

Place the computer on a protected surface in upright position with the left edge facing you.

P/N 994642900 Rev. B 1/2

COVER

Step 2. Locate the SIM Card. The SIM Card is located behind the

plastic cover; left edge of your computer.

With enclosed magnetic screwdriver proceed to remove one (1) screw as shown. Set screw aside.

Step 3. Remove Plastic Cover

Cingular SIM Card UX Series - Replacement Instructions

Step 4. Unseat the SIM Card. Use your thumb or finger and gently

press the SIM Card in and release

Step 5. Remove the SIM Card. The SIM Card will pop up out of the

slot; proceed to remove it.

Step 6. Punch the SIM Card out of the card.

the pressure.

Step 9. Start the VAIO SmartWi Connection Utility.*

1. Start your computer.

2. Click the SmartWi Connection Utility icon in the task bar.

3. From the SmartWi main screen, click the Cingular button, and then click in the Cingular Connection Manager launch area below

Step 7. Insert the new SIM Card. Place the SIM Card in the slot as

shown and gently push down the SIM card until you hear a click. Release the pressure. The SIM Card

Step 8. Reinstall Plastic Cover. Align plastic cover in place. Using

enclosed magnetic screwdriver, reinstall one (1) previously removed screw as shown.

the button.

4. Call (888) 739-VAIO (8246) to activate your account.

should remain fully in the slot.

CAUTION: Make sure not to

over tighten the screw!

* Note: The VAIO SmartWi Connection Utility Guide provides detailed information on how to use the SmartWi Connection Utility. To view the guide, click Start, point to All Programs, and click VAIO Control Center. Make sure that the Categories tab page is active. Click the Documentation folder, and then click VAIO SmartWi Connection Utility Guide.

P/N 994642900 Rev. B 2/2