Page 1
User Guide
Personal Computer
VGN-UX series
N
Page 2
Contents
Before Use .........................................................................................................................................................................6
Notice...........................................................................................................................................................................7
Documentation .............................................................................................................................................................8
Getting Started .................................................................................................................................................................12
Locating Controls and Ports.......................................................................................................................................13
About the Indicator Lights ..........................................................................................................................................22
Holding Your Computer .............................................................................................................................................23
Connecting a Power Source ......................................................................................................................................25
Using the Battery Pack ..............................................................................................................................................26
Shutting Down Your Computer Safely .......................................................................................................................30
Using Your VAIO Computer .............................................................................................................................................31
Using the Keyboard ...................................................................................................................................................32
Using the Touch Panel...............................................................................................................................................33
Using the Pointing Device..........................................................................................................................................35
Using Special-function Buttons ..................................................................................................................................37
Blocking Unintentional Operations.............................................................................................................................38
Using the Built-in MOTION EYE Camera...................................................................................................................40
Using the Memory Stick Media ..................................................................................................................................44
Using CompactFlash Memory Cards .........................................................................................................................49
Using the Internet.......................................................................................................................................................53
2
nN
Page 3
3
nN
Using Wireless LAN (WLAN) .....................................................................................................................................54
Using the Bluetooth Functionality ..............................................................................................................................61
Using Peripheral Devices .................................................................................................................................................68
Connecting the Port Replicator ..................................................................................................................................69
Connecting the Display/LAN Adapter ........................................................................................................................75
Connecting an Optical Disc Drive ..............................................................................................................................76
Connecting External Speakers ..................................................................................................................................78
Connecting an External Display.................................................................................................................................79
Selecting Display Modes............................................................................................................................................84
Using the Multiple Monitors Function.........................................................................................................................85
Connecting an External Microphone..........................................................................................................................87
Connecting a Universal Serial Bus (USB) Device......................................................................................................88
Connecting a Printer ..................................................................................................................................................91
Connecting an i.LINK Device .....................................................................................................................................92
Connecting to a Network (LAN) .................................................................................................................................93
Customizing Your VAIO Computer ..................................................................................................................................94
Setting the Password .................................................................................................................................................95
Using Fingerprint Authentication..............................................................................................................................102
Setting Up Your Computer with VAIO Control Center..............................................................................................123
Using the Power Saving Modes...............................................................................................................................124
Managing Power with VAIO Power Management ....................................................................................................128
Page 4
4
nN
Precautions ....................................................................................................................................................................131
On Handling the LCD Screen ..................................................................................................................................132
On Using the Power Source ....................................................................................................................................133
On Handling Your Computer....................................................................................................................................134
On Using the Built-in MOTION EYE Camera...........................................................................................................136
On Handling Floppy Disks .......................................................................................................................................137
On Handling Discs ...................................................................................................................................................138
On Using the Battery Pack.......................................................................................................................................139
On Using Headphones.............................................................................................................................................140
On Handling Memory Stick Media............................................................................................................................141
On Using the Folding Stand.....................................................................................................................................142
On Using the Adapter Holding Band........................................................................................................................144
On Using the Wrist Strap .........................................................................................................................................145
On Replacing the Multi-pointer Cap.........................................................................................................................146
Troubleshooting .............................................................................................................................................................147
Computer .................................................................................................................................................................148
System Security .......................................................................................................................................................155
Battery......................................................................................................................................................................156
Built-in MOTION EYE Camera.................................................................................................................................158
Networking ...............................................................................................................................................................161
Bluetooth Technology ..............................................................................................................................................164
Optical Discs ............................................................................................................................................................168
Display .....................................................................................................................................................................169
Printing.....................................................................................................................................................................174
Page 5
5
nN
Microphone ..............................................................................................................................................................175
Speakers..................................................................................................................................................................176
Pointing Device ........................................................................................................................................................177
Keyboard..................................................................................................................................................................179
Floppy Disks ............................................................................................................................................................180
Audio/Video..............................................................................................................................................................181
Memory Stick Media ................................................................................................................................................182
Peripherals ...............................................................................................................................................................183
Support Options .............................................................................................................................................................184
Sony Support Information ........................................................................................................................................184
e-Support .................................................................................................................................................................185
Trademarks..............................................................................................................................................................187
Page 6
nN
Before Use
Before Use
Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has
combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal
computing.
!
External views illustrated in this manual may look slightly different from those of your computer.
6
Page 7
7
nN
Before Use
Notice
© 2007 Sony Corporation. All rights reserved.
This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any
machine-readable form without prior written approval.
Sony Corporation provides no warranty with regard to this manual, the software, or other information contained herein and
hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this
manual, the software, or such other information. In no event shall Sony Corporation be liable for any incidental, consequential,
or special damages, whether based on tort, contract, or otherwise, arising out of or in connection with this manual, the
software, or other information contained herein or the use thereof.
In the manual, the ™ or ® marks are not specified.
Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time
without notice. The software described herein is governed by the terms of a separate user license agreement.
Page 8
8
nN
Before Use
Documentation
Your documentation includes printed information and user guides to read on your VAIO computer.
Guides are provided in PDF format, which you can easily browse through and print out.
The My Club VAIO portal is a perfect starting point to use your computer — a comprehensive collection of everything you
need to get the most from your computer.
The user guides are collected under Documentation, which can be shown by clicking the VAIO Documentation icon on the
desktop or following these steps:
1 Click Start , All Programs, and My Club VAIO.
2 Click Documentation.
3 Select the guide you want to read.
✍
You can manually browse to the user guides by going to Computer > VAIO (C:) (your C drive) > Documentation > Documentation and opening the
folder for your language.
You may have a separate disc for the documentation of bundled accessories.
Page 9
9
nN
Before Use
Printed Documentation
❑ A Setting Up Poster — Describes the process from unpacking to starting up your VAIO.
❑ Troubleshooting Guide — Contains solutions to common problems.
❑ Recovery Guide — Contains an explanation of how to make a backup copy of your data and recover your computer
system, and solutions to computer malfunctions.
❑ Booklets containing the following information: Sony GUARANTEE conditions, Safety / Regulations, Modem
Regulations, Wireless LAN Regulations, Bluetooth Regulations, End User Software License Agreement, and
Sony Support services.
Non-printed Documentation
❑ User Guide (this manual) — Contains features of your computer. It also includes information about the software programs
included with your computer, as well as information on solving common problems.
❑ Specifications — The online Specifications describe the hardware and software configuration of your VAIO computer.
To view the online Specifications:
1 Connect to the Internet.
2 Go to the Sony online support Web site at http://www.vaio-link.com/
.
Page 10
nN
Before Use
My Club VAIO
In My Club VAIO you can find:
Documentation, which gives you:
❑ Access to the User Guide. This manual explains the features of your computer in detail, how to use these features
confidently and safely, connect peripheral devices and more.
❑ Access to Help & Training. This is the portal of VAIO Help and Support Center.
❑ Important information about your computer, in the form of notices and announcements.
In My Club VAIO you can also find:
❑ Accessories
Want to expand the capabilities of your computer? Click this icon and have a look at your compatible accessories.
❑ Software
Feeling creative? Click this icon for an overview of your software and check out our upgrade options.
❑ Wallpapers
Click this icon and check out our most popular Sony and Club VAIO wallpapers.
❑ Links
Click this icon and check out our most popular Sony and Club VAIO Web sites.
10
Page 11
nN
Before Use
Windows Help and Support
Windows Help and Support is a comprehensive resource for practical advice, tutorials, and demonstrations to help you
learn to use your computer.
Use the Search feature, Index, or table of contents to view all Windows Help resources, including those that are on the
Internet.
To access Windows Help and Support, click Start and Help and Support. Or go to Windows Help and Support by
pressing and holding the Microsoft Windows key and pressing the F1 key.
Further Sources
❑ Consult the help files on the software you are using for detailed information on features and troubleshooting.
❑ Go to http://www.club-vaio.com
to find online tutorials about your favorite VAIO software.
11
Page 12
Getting Started
This section describes how to get started with using your VAIO computer.
❑ Locating Controls and Ports (page 13)
❑ About the Indicator Lights (page 22)
❑ Holding Your Computer (page 23)
❑ Connecting a Power Source (page 25)
❑ Using the Battery Pack (page 26)
❑ Shutting Down Your Computer Safely (page 30)
12
nN
Getting Started
Page 13
Locating Controls and Ports
Take a moment to identify the controls and ports shown on the following pages.
Top
A Air vent
B Focus selection switch (page 40)
C Memory Stick Duo/PRO Duo media slot
D Memory Stick Duo/PRO Duo media indicator (page 22)
E CAPTURE button (page 40)
* Your computer supports Memory Stick Duo media and Memory Stick PRO
Duo media with high speed and high capacity capabilities.
*
(page 45)
13
nN
Getting Started
Page 14
Front
A Left button (page 35)
B Right button (page 35)
C Center button (page 35)
D Launcher button (page 37)
E WIRELESS switch (page 54)
F Touch panel LCD screen (page 33)
14
nN
Getting Started
Page 15
Built-in speaker (monaural)
A
B Fingerprint sensor (page 102)
C Front camera (MOTION EYE) (page 40)
D Front camera (MOTION EYE) indicator (page 22)
15
nN
Getting Started
Page 16
Multi-pointer (page 35)
A
B Zoom In/Out buttons (page 37)
C Power indicator (page 22)
D POWER switch
E Built-in microphone (monaural)
16
nN
Getting Started
Page 17
Back
A Rear camera (MOTION EYE) (page 40)
B Rear camera (MOTION EYE) indicator (page 22)
C Stylus
Slide up and pull out the stylus for touch panel operations.
D Air vents
17
nN
Getting Started
Page 18
Right
Getting Started
A Strap holes
Fasten the supplied wrist strap to your computer through either
hole.
B Battery connector (page 26)
18
nN
Page 19
Left
19
nN
Getting Started
A Hi-Speed USB (USB 2.0) port
B CompactFlash memory card slot (page 50)
C Air vent
* Supports high-/full-/low- speeds.
*
(page 88)
Page 20
Bottom
A Battery indicator (page 22)
B Hard disk drive indicator (page 22)
C Num lock indicator (page 22)
D Caps lock indicator (page 22)
E Scroll lock indicator (page 22)
F Bluetooth indicator (page 22)
G WLAN (Wireless LAN) indicator (page 22)
20
nN
Getting Started
Page 21
21
nN
Getting Started
A DC IN port (page 25)
B Air vent
C I/O connector (page 75)
D Headphones jack (page 78)
E Microphone jack (page 87)
Page 22
Getting Started
About the Indicator Lights
Your computer is equipped with the following indicator lights.
Indicator Functions
Power 1 Illuminates when the power of the computer is on, blinks when the computer is in Sleep mode, and turns off
when the computer is in Hibernate mode or off.
Battery e Illuminates when the computer is using battery power, blinks when the battery pack is running out of power, and
Memory Stick Duo/PRO Duo media Illuminates when data is read from or written to the Memory Stick media in the Memory Stick Duo/PRO Duo
Front/Rear camera (MOTION EYE) Illuminates while the corresponding built-in MOTION EYE camera is in use.
Hard disk drive
Num lock
Caps lock
Scroll lock
Bluetooth technology
Wireless LAN Illuminates when the wireless LAN function is running.
double-blinks when the battery pack is charging.
slot. (Do not enter Sleep mode or turn off the computer when this indicator is on.) When the indicator is off, the
Memory Stick media is not being used.
Illuminates when data is read from or written to the built-in flash memory. Do not enter Sleep mode or turn off
the computer when this indicator is on.
Press and hold the Fn key and press the Num Lk key to activate the numeric keypad. Press it a second time to
deactivate the numeric keypad. The numeric keypad is not active when the indicator is off.
Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key
while the indicator is on. Press the key a second time to turn off the indicator. Normal typing resumes when the
Caps lock indicator is off.
Press and hold the Fn key and press the Scr Lk key to change how you scroll the display. Normal scrolling
resumes when the Scroll lock indicator is off. The Scr Lk key functions differently depending on the program
you are using and does not work with all programs.
Illuminates when the WIRELESS switch is set to ON and Bluetooth technology is enabled.
22
nN
Page 23
Getting Started
Holding Your Computer
You can hold and use your computer in either a horizontal or vertical orientation to suit your preferences.
!
In either orientation, make sure to fasten the supplied wrist strap to your computer and wear it to prevent accidental dropping of the computer from
your palms.
❑ Horizontal orientation
This is the standard orientation of your computer and, by default, the buttons on the front are assigned the functions that
help you use the computer comfortably in this orientation.
23
nN
✍
You can change the default button assignments with VAIO Control Center. See Setting Up Your Computer with VAIO Control Center (page 123) and
find out more in its help file.
The horizontal orientation is represented as Standard mode in VAIO Control Center.
Page 24
Getting Started
❑ Vertical orientation
You can use your computer in this orientation with the help of the VAIO Touch Launcher software. Press the launcher
button to start the software and select to rotate the screen view by 90 degrees clockwise.
24
nN
✍
You might additionally want to change the default button assignments for easier operations, using VAIO Control Center.
The vertical orientation is represented as Rotational mode in VAIO Control Center.
Page 25
25
nN
Getting Started
Connecting a Power Source
You can use either an AC adapter or a rechargeable battery pack as a power source for your computer.
Using the AC Adapter
✍
Use your computer only with the supplied AC adapter.
To use the AC adapter
1 Plug one end of the power cord (1) into the AC adapter (3).
2 Plug the other end of the power cord into an AC outlet (2).
3 Plug the cable attached to the AC adapter (3) into the DC IN port (4) on the computer or on the (optional) port replicator.
!
The shape of the DC In plug varies depending on the AC adapter.
✍
To disconnect your computer completely from AC power, unplug the AC adapter.
Make sure that the AC outlet is easily accessible.
If you do not use your computer for a long period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page 127). This power
saving mode saves the time of shutting down or resuming.
Page 26
Using the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of purchase.
Installing the Battery Pack
To install the battery pack
1 Turn off the computer.
2 Slide the battery pack into the battery compartment until it clicks into place.
26
nN
Getting Started
✍
When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
!
Certain rechargeable batteries do not meet Sony quality and safety standards. For safety reasons this computer only functions with genuine Sony
batteries designed for this model. When installing another kind of battery, the battery will not be charged and the computer will not function.
Page 27
Getting Started
Charging the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of purchase.
To charge the battery pack
1 Install the battery pack.
2 Connect the AC adapter to the computer.
The computer automatically charges the battery pack (the battery indicator light flashes in a double blink pattern as the
battery pack charges). When the battery pack is about 85% charged, the battery indicator turns off.
Battery indicator light status Meaning
On The computer is using battery power.
Blinks The battery pack is running out of power.
Double blinks The battery pack is charging.
Off The computer is using AC power.
27
nN
Page 28
Getting Started
✍
When the battery pack is running out of power, both the battery and power indicator lights blink.
Keep the battery pack in your computer while it is directly connected to AC power. The battery pack continues to charge while you are using the
computer.
If the battery level falls below 10%, you should either attach the AC adapter to recharge the battery pack or shut down your computer and install a fully
charged battery pack.
The battery pack supplied with your computer is a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack
does not affect battery life.
The battery indicator light is on while you use the battery pack as a power source. When battery life is nearly depleted, both the battery and power
indicator lights start flashing.
For some software applications and some peripheral devices, your computer may not enter Hibernate mode even when battery life is low. To avoid loss
of data when using battery power, you should save your data frequently and manually activate a power management mode, such as Sleep or Hibernate.
If the battery pack wears out when the computer enters Sleep mode, you will lose any unsaved data. Going back to the previous work state is impossible.
To avoid loss of data, you should save your data frequently.
When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
28
nN
Page 29
Getting Started
Removing the Battery Pack
!
You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack
while the computer is in Sleep mode.
To remove the battery pack
1 Turn off the computer.
2 Slide the battery release latches (1) inwards, hold the latches, and slide the battery pack away from the computer.
29
nN
Page 30
30
nN
Getting Started
Shutting Down Your Computer Safely
To avoid losing unsaved data, be sure to shut down your computer properly, as described below.
To shut down your computer
1 Turn off any peripherals connected to the computer.
2 Click Start, the arrow next to the Lock button, and Shut Down.
3 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off
automatically.
The power indicator light turns off.
Page 31
Using Your VAIO Computer
This section describes how to get the most out of using your VAIO computer.
❑ Using the Keyboard (page 32)
❑ Using the Touch Panel (page 33)
❑ Using the Pointing Device (page 35)
❑ Using Special-function Buttons (page 37)
❑ Blocking Unintentional Operations (page 38)
❑ Using the Built-in MOTION EYE Camera (page 40)
❑ Using the Memory Stick Media (page 44)
❑ Using CompactFlash Memory Cards (page 49)
❑ Using the Internet (page 53)
❑ Using Wireless LAN (WLAN) (page 54)
❑ Using the Bluetooth Functionality (page 61)
31
nN
Using Your VAIO Computer
Page 32
Using Your VAIO Computer
Using the Keyboard
The keyboard on your computer is located underneath the touch panel LCD screen. Slide up the screen to reveal the
keyboard as shown below for operations.
!
Keep your fingers off the screen surface while sliding up the touch panel LCD screen.
32
nN
Page 33
33
nN
Using Your VAIO Computer
Using the Touch Panel
Your computer is equipped with the touch panel LCD screen for operations with the stylus (1), including software launches.
!
Make sure to use only the supplied stylus for touch panel operations. Use of any other writing utensils, such as a ball-point pen, may damage the touch
panel surface.
Take out the stylus from the back of your computer and use it for the following actions on the touch panel LCD screen, as
well as handwritten entries. This stylus is extendable. Slide it out to its full length if necessary.
See Back (page 17) for the exact location of the stylus stored on the back of your computer.
Page 34
34
nN
Using Your VAIO Computer
Action Description
Tap Gently hit the stylus once against the touch panel LCD screen.
Double-tap Gently hit the stylus twice against the touch panel LCD screen.
Drag Slide the stylus gently on the touch panel LCD screen.
✍
At your very first Windows startup, you are prompted to calibrate the touch panel for smooth operations. Follow the on-screen instructions. You can
calibrate the touch panel at any time later when you feel uncomfortable with using it. Click Start, All Programs, Touch Panel, and Calibration and follow
the on-screen instructions.
You can customize your touch panel settings with VAIO Control Center to perform the right-clicking action with the stylus. See Setting Up Your
Computer with VAIO Control Center (page 123) and find out more in its help file.
Using Touch Commands
Touch commands are provided to substitute for actions that are needed to perform certain software operations. For example,
you can drag your stylus to the left to view the previous page on your active browser software.
To enable touch commands, press on the touch panel LCD screen for a few seconds. VAIO TOUCH COMMAND appears
on the desktop to indicate the commands are now available.
Some touch commands are defined by default. You can change the assignment of these default touch commands with VAIO
Control Center. See Setting Up Your Computer with VAIO Control Center (page 123) and find out more in its help file.
Page 35
35
nN
Using Your VAIO Computer
Using the Pointing Device
Your computer is equipped with a cursor-pointing device, the multi-pointer (1), to enable you to point to, select, drag, and
scroll objects on the computer screen.
Push the multi-pointer in the direction that you want to move the pointer on the screen. The harder you push the multi-pointer,
the faster moves the pointer.
The following shows the default button assignments in the horizontal orientation (left) and the vertical orientation (right).
You can use VAIO Control Center to change these button assignments. See Setting Up Your Computer with VAIO
Control Center (page 123) and find out more in its help file.
!
To enable the default button assignments in the vertical orientation, you must select on VAIO Touch Launcher.
Page 36
36
nN
Using Your VAIO Computer
Action Description
Point Push the multi-pointer (1) to place the pointer (2) on
an item or object.
Click Press the left button (3) once.
Double-click Press the left button (3) twice.
Right-click Press the right button (4) once.
Drag Push the multi-pointer (1) while pressing the left
Scroll Push the multi-pointer (1) while pressing the center
In many applications, this action displays a shortcut
menu.
button (3).
button (5).
✍
In the vertical orientation, you can press the left and right
buttons simultaneously to substitute for the center button
that is available in the standard orientation.
!
The scroll function is available only with applications that
support the scroll feature.
✍
The pointer may move on its own in rare occasions, which does not indicate a malfunction. Leave the multi-pointer untouched for a while. The pointer
will come to a halt.
The cap at the tip of the multi-pointer is a consumable. When it wears out, replace it with one of the supplied spare caps. See On Replacing the Multi-
pointer Cap (page 146) for more information on replacement.
Page 37
Using Special-function Buttons
Your computer is equipped with special buttons to help you use specific functions of the computer.
A Launcher button
Launches VAIO Touch Launcher by default. You can change this
button assignment with VAIO Control Center. See Setting Up Your
Computer with VAIO Control Center (page 123) and find out more in
its help file.
B Zoom In/Out buttons
Make the screen view zoom in or zoom out.
Each click makes the screen view zoom in or out by 0.5 on a scale of 1
to 3 and cycles when zooming reaches its maximum or minimum level.
To restore the screen view in the actual size, click that
appears on the magnified screen view.
✍
To help you navigate on the magnified screen view, the hand tool is available to
grasp a point on the view and drag it around. To use the hand tool, click
on the magnified screen view. The pointer changes its shape to a hand-like one,
indicating that the hand tool is now selected.
37
nN
Using Your VAIO Computer
To restore the standard pointer, click .
C Rotate button
Restores the standard screen view.
Page 38
38
nN
Using Your VAIO Computer
Blocking Unintentional Operations
While you are carrying your computer around, you might press a button on the computer unintentionally and find an operation
that you never expected in progress. To block such unintentional operations, your computer is provided with the function to
lock certain components of the computer. Slide down the power switch to the HOLD position (in the opposite direction of f
on the switch) until it clicks into place. You will see the color of the hole on the power switch turns orange. Additionally, your
computer screen will display a message and go blank to conserve power.
Page 39
Using Your VAIO Computer
The components to be locked by this function are as follows:
❑ Touch panel
❑ Keyboard
❑ Left button
❑ Right button
❑ Center button
❑ Launcher button
❑ Multi-pointer
❑ Zoom In/Out buttons
❑ CAPTURE button
❑ Fingerprint sensor
✍
Activating this function will turn off the touch panel LCD screen and the screen will go blank. To bring your computer back into Normal mode, slide up
the power switch (in the direction of f on the switch).
39
nN
Page 40
40
nN
Using Your VAIO Computer
Using the Built-in MOTION EYE Camera
Your computer is equipped with two built-in MOTION EYE cameras: front camera (MOTION EYE) (1) and rear camera
(MOTION EYE) (2). These cameras are not designed for simultaneous use, so you must first select the one that is suitable
for your purpose, using VAIO Camera Utility. This utility will automatically launch when you start the software that uses the
camera. For more information on VAIO Camera Utility, see the help file on the software.
❑ Front camera (MOTION EYE) (1)
Use this camera for video conferences with instant messaging software.
❑ Rear camera (MOTION EYE) (2)
Use this camera for capturing still images and movies with VAIO Camera Capture Utility. For the detailed operation
instructions, see the help file on the VAIO Camera Capture Utility software.
Page 41
41
nN
Using Your VAIO Computer
!
The VAIO Camera Capture Utility software does not allow parallel use of the camera by any other software. Make sure to exit such software before
capturing still images and movies with VAIO Camera Capture Utility.
You cannot use the front and rear cameras at the same time.
When the screen view is rotated, the front and rear cameras are both disabled.
To use the rear camera (MOTION EYE), make sure to slide up the touch panel LCD screen.
The finder view on the main window shows mirrored image streams. This is normal and captured still images will not be mirrored.
The finder view on the main window may show some noises, for example horizontal streaks, if you view a rapid-moving object. This is normal and does
not indicate a malfunction.
You cannot operate the built-in MOTION EYE camera with the Microsoft Windows MovieMaker software.
Page 42
Using Your VAIO Computer
Capturing Still Images
To capture a still image
1 Press the CAPTURE button on your computer to launch VAIO Camera Capture Utility.
✍
VAIO Camera Utility launches automatically.
2 Click the Still icon in the right pane of the utility's main window.
3 Turn the camera to your subject.
4 For macro closeup capturing, slide the focus selection switch to the position.
!
The focus selection switch is only effective for the rear camera (MOTION EYE).
The focusing distance for closeup capturing is approximately 7 cm from the lens.
5 Press the CAPTURE button on your computer.
The current image in the finder view is captured and its thumbnail image is added to the thumbnail view at the bottom of
the main window.
✍
VAIO Camera Capture Utility provides many more features. See the help file on the software for more information.
42
nN
Page 43
Capturing Movies
To capture a movie
1 Press the CAPTURE button on your computer to launch VAIO Camera Capture Utility.
✍
VAIO Camera Utility launches automatically.
2 Click the Movie icon in the right pane of the utility's main window.
3 Turn the camera to your subject.
4 For macro closeup capturing, slide the focus selection switch to the position.
!
The focus selection switch is only effective for the rear camera (MOTION EYE).
The focusing distance for closeup capturing is approximately 7 cm from the lens.
5 Press the CAPTURE button on your computer to start movie recording.
6 When finished, press the CAPTURE button once again to stop movie recording.
The first scene of the captured movie is added to the thumbnail view at the bottom of the main window.
43
nN
Using Your VAIO Computer
✍
VAIO Camera Capture Utility provides many more features. See the help file on the software for more information.
Page 44
44
nN
Using Your VAIO Computer
Using the Memory Stick Media
Your computer supports the Memory Stick media. Memory Stick media is a compact, portable, and versatile IC recording
media especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile
phones and other devices. Because it is removable, it can be used for external data storage.
For the latest information about the Memory Stick media, visit the Memory Stick Web site at http://www.memorystick.com/en/
!
Your computer has been tested and found compatible with the Sony branded Memory Stick media with capacity of up to 4 GB that are available as of
September 2006. However, not all Memory Stick media that meet the same conditions as the compatible media are guaranteed of compatibility.
Inserting a Memory Stick media with multiple conversion adapters is not guaranteed of compatibility.
MagicGate is the general name of the copyright protection technology developed by Sony. Use a Memory Stick media with the MagicGate logo to use
this feature.
.
Page 45
nN
Using Your VAIO Computer
Inserting a Memory Stick Media
To insert a Memory Stick media
1 Hold the Memory Stick media so that the arrow surface of the media and the front of the computer face in the same
direction and the arrow points toward the Memory Stick Duo/PRO Duo media slot.
2 Carefully slide the Memory Stick media into the slot until it clicks into place.
The Memory Stick media is automatically detected by your system and appears in your Computer window as a local
drive, under the appropriate letter (depending on the configuration of the computer).
!
Be sure to hold the Memory Stick media with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer
or the Memory Stick media, do not force the Memory Stick media into the slot if you cannot insert it smoothly.
45
Do not insert more than one Memory Stick media into the slot. Improper insertion of the media may damage both your computer and the media.
✍
Your computer supports Memory Stick Duo media and is equipped with the Memory Stick Duo/PRO Duo slot that is only compatible with the duo-size
media. For more information on the Memory Stick Duo media, visit the Memory Stick Web site at http://www.memorystick.com/en/
.
Page 46
Using Your VAIO Computer
To view the contents of the Memory Stick media
1 Click Start and Computer to open the Computer window.
2 Double-click the Memory Stick media icon to view the list of data files saved in the Memory Stick media.
To format a Memory Stick media
The Memory Stick media has been formatted in the factory default setting and is ready for use.
If you want to reformat the media with your computer, follow these steps.
!
Be sure to use the device that is designed to format the media and supports the Memory Stick media when formatting the media.
Formatting the Memory Stick media erases the entire data on the media. Avoid accidental erasure of your valuable data.
Do not remove the Memory Stick media from the slot while formatting the media. This could cause a malfunction.
1 Carefully slide the Memory Stick media into the slot until it clicks into place.
2 Click Start and Computer to open the Computer window.
3 Right-click the Memory Stick media icon and select Format.
4 Click Restore device defaults.
!
The size of the allocation unit and file system may change.
46
nN
Do not select NTFS from the File system drop-down list.
✍
The formatting process will be completed more quickly if you select Quick Format in Format options.
5 Click Start.
Page 47
6 At the confirmation prompt, click OK.
The formatting process starts.
!
It may take time to format the Memory Stick media depending on the media.
7 Once completed, click OK.
8 Click Close.
47
nN
Using Your VAIO Computer
Page 48
Using Your VAIO Computer
Removing a Memory Stick Media
To remove a Memory Stick media
1 Check that the Memory Stick Duo/PRO Duo media indicator is off.
2 Push the Memory Stick media in toward the computer.
The Memory Stick media ejects.
3 Pull the Memory Stick media out of the slot.
!
Always remove the Memory Stick media gently, or it may pop out unexpectedly.
Do not remove the Memory Stick media while the Memory Stick Duo/PRO Duo media indicator is turned on. If you do, you may lose data. Large volumes
of data may take time to load, so be sure the indicator is off before removing the Memory Stick media.
48
nN
Page 49
49
nN
Using Your VAIO Computer
Using CompactFlash Memory Cards
In addition to the Memory Stick Duo/PRO Duo media slot, your computer is equipped with a CompactFlash memory card slot.
You can use this slot to transfer data among digital cameras, camcorders, music players, and other audio/video devices.
!
Use care when inserting or removing a memory card from the slot. Do not force the memory card in or out of the slot.
The CompactFlash memory card slot on your computer supports Type I and Type II media.
Your computer has been tested and found compatible only with major CompactFlash memory card media available as of September 2006. However,
not all CompactFlash memory card media that meet the same conditions as the compatible media are guaranteed of compatibility.
Page 50
50
nN
Using Your VAIO Computer
Inserting a CompactFlash Memory Card
!
Your computer is delivered with a slot protector in the CompactFlash memory card slot. Remove the slot protector before you use the CompactFlash
memory card slot for the first time.
Use care when inserting or removing the CompactFlash memory card from the slot. Do not force it in or out of the slot.
✍
You do not need to shut down your computer before inserting or removing a CompactFlash memory card.
To insert a CompactFlash memory card
1 Gently grasp the edge of the CompactFlash memory card protector and pull it out of the slot.
2 Hold the CompactFlash memory card with the arrow facing upward and pointing toward the CompactFlash memory card
slot.
3 Carefully slide the CompactFlash memory card (1) into the slot until it clicks into place.
Do not force the card into the slot.
Page 51
Using Your VAIO Computer
!
Insert the CompactFlash memory card slot protector to protect against debris entering the slot when not using a CompactFlash memory card. Before
moving your computer, make sure to insert the CompactFlash memory card slot protector into the slot.
✍
If the memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.
Make sure you use the most recent software driver provided by the CompactFlash memory card manufacturer.
51
nN
Page 52
52
nN
Using Your VAIO Computer
Removing a CompactFlash Memory Card
Follow the steps below to remove the CompactFlash memory card while your computer is on. If it is not removed properly,
your system may not work properly.
To remove a CompactFlash memory card
✍
To remove a CompactFlash memory card when your computer is off, skip steps 1 to 7.
1 Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.
2 Select the hardware you want to unplug.
3 Click Stop.
The Stop a Hardware Device window appears.
4 Confirm that the device can be safely removed from the system.
5 Click OK.
A window appears, explaining that it is safe to remove the device.
6 Click OK.
7 Click Close to close the Safely Remove Hardware window.
8 Gently grasp the edge of the CompactFlash memory card and pull it out of the slot.
Page 53
53
nN
Using Your VAIO Computer
Using the Internet
To use the Internet, you need to connect an external modem device, for example a USB telephone modem, an xDSL modem,
and a cable modem, to your computer. For the detailed instructions on connection setups and modem configuration, see the
manual that came with your modem.
Page 54
54
nN
Using Your VAIO Computer
Using Wireless LAN (WLAN)
Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each
other through a network. A WLAN is a network in which a user can connect to a local area network (LAN) through a wireless
(radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.
The Sony WLAN supports all normal Ethernet activities, but with the added benefits of mobility and roaming. You can still
access information, Internet/intranet and network resources, even in the middle of a meeting, or as you move from one place
to another.
You can communicate without an access point, which means that you can communicate between a limited number of
computers (ad-hoc). Or you can communicate through an access point, which allows you to create a full infrastructure
network (infrastructure).
Page 55
55
nN
Using Your VAIO Computer
✍
In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the
WLAN functionality, read the Regulations Guide carefully.
*
WLAN uses the IEEE 802.11a
Privacy (WEP), which is a security protocol, Wi-Fi Protected Access 2 (WPA2), and Wi-Fi Protected Access (WPA). Proposed jointly by the IEEE and
Wi-Fi Alliance, both WPA2 and WPA are specifications of standards based, interoperable security enhancements that increase the level of data
protection and access control for existing Wi-Fi networks. WPA has been designed to be forward compatible with the IEEE 802.11i specification. It
utilizes the enhanced data encryption TKIP (Temporal Key Integrity Protocol) in addition to user authentication using 802.1X and EAP (Extensible
Authentication Protocol). Data encryption protects the vulnerable wireless link between clients and access points. Besides that, there are other typical
LAN security mechanisms to ensure privacy, such as: password protection, end-to-end encryption, virtual private networks, and authentication. WPA2,
the second generation of WPA, provides stronger data protection and network access control and is also designed to secure all versions of 802.11
devices, including 802.11b, 802.11a, and 802.11g, multi-band and multi-mode. In addition, based on the ratified IEEE 802.11i standard, WPA2 provides
government grade security by implementing the National Institute of Standards and Technology (NIST) FIPS 140-2 compliant AES encryption algorithm
and 802.1X-based authentication. WPA2 is backward compatible with WPA.
* See the online Specifications to see whether your model supports the IEEE 802.11a standard.
Wireless LAN devices using the IEEE 802.11a standard and the ones using the IEEE 802.11b or g standard cannot communicate because the frequencies
are different.
IEEE 802.11b: The standard speed is 11 Mbps, or about 30 to 100 times faster than a standard dial up.
/b/g standard, which specifies the used technology. The standard includes the encryption methods: Wired Equivalent
IEEE 802.11a/g: The standard speed is 54 Mbps, or about 5 times faster than a wireless LAN device using the IEEE 802.11b standard.
The 2.4 GHz bandwidth used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference
from other devices that use the same bandwidth are employed on wireless LAN compatible devices, such interference may cause lower communication
speed, narrower communication range, or broken wireless connections.
Page 56
56
nN
Using Your VAIO Computer
The communication speed varies depending on the distance between communication devices, existence of obstacles between such devices, the device
configuration, the radio conditions, and the software in use. In addition, communications may be cut off depending on the radio conditions.
The communication range varies depending on the actual distance between communication devices, existence of obstacles between such devices, the
radio conditions, the ambient environment that includes existence of walls and materials of such walls, and the software in use.
Deploying IEEE 802.11b and IEEE 802.11g products on the same wireless network may reduce the communication speed due to radio interference.
Taking this into consideration, the IEEE 802.11g products are designed to reduce the communication speed to ensure communications with
IEEE 802.11b products.
When the communication speed is not as fast as expected, changing the wireless channel on the access point may increase the communication speed.
Page 57
57
nN
Using Your VAIO Computer
Communicating without an Access Point (Ad-hoc)
An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other
central controller or access point. Each device communicates directly with other devices in the network. You can set up an
ad-hoc network easily at home.
❑ If the wireless connection is initiated by the VAIO computer, channel 11 will be selected.
❑ If the wireless connection is initiated by peer wireless LAN equipment, the wireless LAN communication will make use of
the channel selected by the peer wireless LAN equipment.
Page 58
Using Your VAIO Computer
To communicate without an access point (ad-hoc)
1 Turn on the WIRELESS or WIRELESS LAN switch.
The Wireless LAN indicator lights up.
*
On models that support the Bluetooth functionality
the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK.
2 Click Start and Control Panel.
3 Click View network status and tasks under Network and Internet.
4 Click Set up a connection or network on the left pane.
The Set up a connection or network window appears.
5 Select an option to specify the ad-hoc network settings and click Next.
6 Follow the on-screen instructions.
* See the online Specifications to see whether your model supports the Bluetooth functionality and/or the IEEE 802.11a/b/g standard.
and/or the IEEE 802.11a/b/g standard*, double-click ( / ) on
58
nN
Page 59
59
nN
Using Your VAIO Computer
Communicating with an Access Point (Infrastructure)
An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access
point (not supplied), for example the Sony Access Point. The access point bridges the wireless and wired LAN and acts as a
central controller for the wireless LAN. The access point coordinates transmission and reception from multiple wireless
devices within a specific range.
The access point will select which channel to use on an infrastructure network.
!
For details on how to select the channel that will be used by the access point, see the manual that came with your access point.
Page 60
Using Your VAIO Computer
To connect to a wireless network
1 Make sure an access point is set up.
See the manual that came with your access point for more information.
2 Turn on the WIRELESS or WIRELESS LAN switch.
The Wireless LAN indicator lights up.
*
On models that support the Bluetooth functionality
and/or the IEEE 802.11a/b/g standard*, double-click ( / ) on
the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK.
3 Click Start and Control Panel.
4 Click View network status and tasks under Network and Internet.
5 Click Manage wireless networks.
6 Click Add.
7 Follow the on-screen instructions.
* See the online Specifications to see whether your model supports the Bluetooth functionality and/or the IEEE 802.11a/b/g standard.
To disconnect from a wireless network
Turn off the WIRELESS or WIRELESS LAN switch.
60
nN
!
Turning off the wireless LAN functionality while accessing remote documents, files, or resources may result in data loss.
✍
For WPA-PSK or WPA2-PSK authentication, you must enter a network key of 8 to 64 alphanumeric characters long.
Page 61
61
nN
Using Your VAIO Computer
Using the Bluetooth Functionality
You can establish wireless communication between your computer and other Bluetooth devices such as another computer
or a mobile phone. You can transfer data between these devices without cables and up to 10 meters range in open space.
To connect to a Bluetooth device
1 Turn on the WIRELESS switch.
2 Double-click ( / ) on the taskbar to display the Wireless Device Switch window.
3 Select the Enable Bluetooth Device option.
4 Click OK.
Page 62
62
nN
Using Your VAIO Computer
Notes on using the Bluetooth functionality
❑ The data transfer rate varies, depending on the following conditions:
❑ Obstacles, such as walls, located between devices
❑ Distance between devices
❑ Material used in walls
❑ Proximity to microwaves and cordless telephones
❑ Radio frequency interference and other environmental conditions
❑ Device configuration
❑ Type of software application
❑ Type of operating system
❑ Use of both wireless LAN and Bluetooth functionalities at the same time on your computer
❑ Size of file being exchanged
❑ Note that due to limitations of the Bluetooth standard, large files may occasionally be corrupted during continuous transfer
due to electromagnetic interference from the environment.
❑ All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained. Even if
standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange may
not be possible in all situations.
❑ As general characteristics of Bluetooth technology, video and audio may go out of synchronization if you play videos on
your computer with audio output from the connected Bluetooth device.
Page 63
63
nN
Using Your VAIO Computer
❑ The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth
devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous
use of the Bluetooth functionality and wireless communication devices, however, may cause radio interference and result
in poorer communication speeds and distances than the standard values.
✍
Read the Regulations Guide before using the Bluetooth functionality.
❑ The Bluetooth functionality may not work depending on the third party devices or the software version used by third party
companies.
❑ As general characteristics of Bluetooth technology, connecting multiple Bluetooth devices to your computer may cause
bandwidth congestion, resulting in poor performance of the devices.
Bluetooth Security
The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to
communicate. With the authentication function, you can avoid any anonymous Bluetooth device to access your computer.
The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be
determined for both devices to be registered. Once a device is registered, there is no need to re-enter the passkey.
✍
The passkey can be different each time, but must be the same at both ends.
For certain devices, such as a mouse, no passkey can be entered.
Page 64
nN
Using Your VAIO Computer
Communicating with Another Bluetooth Device
You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a
mouse, or a digital camera without the use of any cables.
64
Page 65
65
nN
Using Your VAIO Computer
To communicate with another Bluetooth device
To communicate with another Bluetooth device, you need first to set up the Bluetooth functionality. For setting up and using
the Bluetooth functionality, see the help file on the Bluetooth utility software.
To see the help file
1 Right-click the Bluetooth icon on the taskbar, and select Help from the menu.
Stopping the Bluetooth Connection
To stop the Bluetooth connection, turn off the WIRELESS switch. The Bluetooth indicator turns off.
Page 66
66
nN
Using Your VAIO Computer
Using the Bluetooth Headset
The Bluetooth headset (not supplied) will come in handy during a video conference over the Internet using instant messaging
software. For details on using the Bluetooth headset, see the manual that came with your Bluetooth headset.
To connect the headset with your computer
1 Press and hold the headset power button for at least five seconds to turn on the Bluetooth headset.
2 Press and hold the volume buttons for at least five seconds until the indicator light blinks in red and green.
3 Right-click the Bluetooth icon on the taskbar and select Bluetooth Settings from the menu.
The Bluetooth Settings window appears and Add New Connection Wizard automatically starts.
4 If the Add New Connection Wizard window does not appear, click New Connection.
The Add New Connection Wizard window appears.
5 Select Express Mode (Recommended) and then click Next.
The wizard searches for Bluetooth devices in range and lists available devices, if any.
6 Select the device name for your Bluetooth headset and then click Next.
The Bluetooth Manager-Bluetooth Security window appears when a connection is established.
7 Enter "0000" for Bluetooth Passkey (PIN) and then click OK.
8 Click Next.
The headset icon appears in the Bluetooth Settings window.
9 Right-click the icon and select Connect from the menu.
Page 67
To disconnect the headset from your computer
1 Right-click the Bluetooth icon on the taskbar and select Bluetooth Settings from the menu.
The Bluetooth Settings window appears.
2 Right-click the headset icon and select Disconnect from the menu.
3 Click Yes.
67
nN
Using Your VAIO Computer
Page 68
Using Peripheral Devices
You can add functionality to your VAIO computer by using the various ports on the computer.
❑ Connecting the Port Replicator (page 69)
❑ Connecting the Display/LAN Adapter (page 75)
❑ Connecting an Optical Disc Drive (page 76)
❑ Connecting External Speakers (page 78)
❑ Connecting an External Display (page 79)
❑ Selecting Display Modes (page 84)
❑ Using the Multiple Monitors Function (page 85)
❑ Connecting an External Microphone (page 87)
❑ Connecting a Universal Serial Bus (USB) Device (page 88)
❑ Connecting a Printer (page 91)
❑ Connecting an i.LINK Device (page 92)
❑ Connecting to a Network (LAN) (page 93)
68
nN
Using Peripheral Devices
Page 69
nN
Using Peripheral Devices
Connecting the Port Replicator
Attaching the supplied port replicator enables you to connect additional peripherals to your computer, such as an i.LINK
device and an external display.
69
Page 70
Locating Ports on the Port Replicator
70
nN
Using Peripheral Devices
i.LINK (IEEE 1394) S400 port (page 92)
A
B MONITOR (VGA) port (page 79)
C Hi-Speed USB (USB 2.0) ports
*
(page 88)
D Network (Ethernet) port (100BASE-TX / 10BASE-T) (page 93)
E DC IN port (page 71)
F DC IN indicator
G AV Out jack (page 81)
H Hi-Speed USB (USB 2.0) port
* Supports high-/full-/low- speeds.
*
(page 88)
!
The port replicator can be powered only through the AC adapter supplied with your computer. Do not unplug the AC adapter from the port replicator
and the AC outlet while using the port replicator; this may cause data damage or hardware malfunctions.
Page 71
Attaching Your Computer to the Port Replicator
To attach your computer to the port replicator
!
To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the port replicator.
1 Disconnect all peripherals from the computer.
2 Attach the guide holder (1) to the port replicator.
71
nN
Using Peripheral Devices
Page 72
3 Plug one end of the power cord (2) into the AC adapter (3) and the other end into an AC outlet.
4 Plug the cable attached to the AC adapter (3) into the DC IN port (4) on the port replicator (5).
72
nN
Using Peripheral Devices
Page 73
5 Slide down the computer along the guide holder until it is fixed on the port replicator.
6 Turn on the computer.
!
Use the AC adapter supplied with your computer.
73
nN
Using Peripheral Devices
Keep the battery pack installed on your computer when attaching the computer to the port replicator.
Do not move your computer while attached to the port replicator; this may detach the port replicator and cause damage to the port replicator and the
computer.
Page 74
Disconnecting Your Computer from the Port Replicator
!
To prevent loss of unsaved data, be sure to turn off your computer before disconnecting it from the port replicator.
To disconnect your computer from the port replicator
1 Turn off the computer and the connected peripherals.
2 Slide the computer up along the guide holder and away from the port replicator.
74
nN
Using Peripheral Devices
✍
To disconnect the port replicator completely from AC power, unplug the AC adapter.
Page 75
75
nN
Using Peripheral Devices
Connecting the Display/LAN Adapter
Connect the supplied display/LAN adapter (1) to the I/O connector (2) on the bottom of your computer to expand connectivity
to the computer.
The display/LAN adapter has the following ports:
A AV Out jack (page 81)
B Monitor (VGA) port (page 79)
C Network (Ethernet) port (100BASE-TX / 10BASE-T) (page 93)
Page 76
76
nN
Using Peripheral Devices
Connecting an Optical Disc Drive
To use optical CDs and DVDs with your computer, you need to connect an external optical disc drive (not supplied) via the
port replicator.
Connecting an Optical Disc Drive
!
Make sure to connect an external optical disc drive before you launch any preinstalled CD/DVD software.
To connect an optical disc drive
1 Choose the USB port (1) you prefer to use.
2 Plug one end of a USB cable (not supplied) (2) into the USB port, and the other end to an external optical disc drive (not
supplied) (3).
See the manual that came with your external optical disc drive for the detailed instructions on connecting the USB cable
to the drive.
Page 77
77
nN
Using Peripheral Devices
Disconnecting an Optical Disc Drive
You can disconnect an optical disc drive when your computer is on or off. Disconnecting the drive when the computer is in a
power saving mode (Sleep or Hibernate) may cause the computer to malfunction. If the computer is off, you can unplug the
i.LINK cable from the computer at any time.
To disconnect an optical disc drive
1 Close all software applications accessing the optical disc drive.
2 Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.
3 Select the optical disc drive you want to disconnect.
4 Click Stop.
The Stop a Hardware device window appears.
5 Make sure the optical disc drive is selected, and click OK.
A message appears stating it is now safe to remove the hardware device.
6 Click OK.
7 Click Close to close the Safely Remove Hardware window.
8 Disconnect the optical disc drive from the computer.
Page 78
Connecting External Speakers
You can enhance the sound quality of your computer by connecting external speakers.
To connect external speakers
1 Plug the speaker cable (1) into the headphones jack (2) i.
2 Plug the other end of the speaker cable to the external speaker (3).
3 Turn down the volume of the speakers before you turn them on.
✍
Make sure your speakers are designed for computer use.
78
nN
Using Peripheral Devices
!
Do not place floppy disks on the speakers; their magnetic field may damage the data on the disks.
Page 79
79
nN
Using Peripheral Devices
Connecting an External Display
You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer
display or a projector.
✍
Connect the power cord after connecting all other cables.
Connected external displays are used as secondary screens.
On the Windows operating system, you can also use an external display to set up multiple monitors.
Connecting a Computer Display
You need the supplied port replicator or display/LAN adapter to connect a computer display to your computer.
To connect a computer display
1 If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.
2 Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the port replicator or on the display/LAN
adapter.
Page 80
80
nN
Using Peripheral Devices
Connecting a Multimedia Computer Display
You need the supplied port replicator or display/LAN adapter to connect a multimedia computer display to your computer.
To connect a multimedia computer display
1 Plug the power cord of your multimedia computer display (1) into an AC outlet.
2 Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the port replicator or on the display/LAN
adapter.
3 Plug the speaker cable (4) into the headphones jack (5) i on the computer.
4 Plug the microphone cable (6) into the microphone jack (7) m on the computer.
Page 81
81
nN
Using Peripheral Devices
Connecting a TV
You need the supplied port replicator or display/LAN adapter to connect a TV to your computer.
To connect a TV to your computer
1 Plug the power cord of your TV (1) into an AC outlet.
2 Plug one end of an audio/video cable (2) into the AV Out jack (3) T on the port replicator or on the display/LAN adapter
and the other to the TV.
3 Switch the input channel of the TV to external input.
4 Set up the TV configuration system.
Page 82
Using Peripheral Devices
✍
You need to use an AV cable that has a minijack connector on one end and 3 RCA (also called cinch) connectors on the other end. If your TV does not
have RCA connectors but has a SCART connector, you need an RCA to SCART converter. If your computer has an S VIDEO port, you can use this port
as an alternative means of connection.
See the manual that came with your peripheral for more information on installation and use.
If the display resolution of your computer is more than 1024 x 768 pixels, a part of the image cannot be displayed on your TV. The hidden area on your
TV can be seen by moving the cursor on the computer. If you want to display the full image, change the display resolution of the computer to 1024 x
768 pixels or lower.
82
nN
Page 83
83
nN
Using Peripheral Devices
Connecting a Projector
You need the supplied port replicator or display/LAN adapter to connect a projector (for example, the Sony LCD projector) to
your computer.
To connect a projector
1 Connect the power cord (1) of your projector into an AC outlet.
2 Plug an RGB signal cable (2) (not supplied) into the monitor (VGA) port (3) a on the port replicator or on the display/LAN
adapter.
3 Plug an audio cable (4) (not supplied) into the headphones jack (5) i.
4 Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).
Page 84
84
nN
Using Peripheral Devices
Selecting Display Modes
You can select which display to be used as the primary monitor when an external display (desktop monitor, etc.) is connected
to your computer.
If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors
Function (page 85) for more information.
To select a display
1 Right-click on the desktop and select Personalize from the shortcut menu.
2 Click Display Settings.
The Display Settings window appears.
3 Follow the on-screen instructions to change the settings.
✍
You may not be able to display the same contents on your computer screen and the external display or projector at the same time, depending on the
type of your external display or projector.
Before turning on your computer, turn on the peripheral devices.
You can alternatively select a display with VAIO Touch Launcher. See the help file on the software for more information.
Page 85
85
nN
Using Peripheral Devices
Using the Multiple Monitors Function
The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you
have an external display attached to the monitor (VGA) port, your computer screen and the external display can function as
a single desktop.
You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window
or a toolbar, from one display to the other.
✍
Your external display may not support the Multiple Monitors function.
Certain software applications may not be compatible with Multiple Monitors settings.
Make sure that your computer does not enter Sleep or Hibernate mode while you are using Multiple Monitors mode; otherwise the computer may not
return to Normal mode.
If you set different colors on each display, do not divide one single window on two displays; otherwise your software may not work properly.
Set fewer colors or a lower resolution for each display.
Page 86
To select the Multiple Monitors mode
1 Right-click on the desktop and select Personalize from the shortcut menu.
2 Click Display Settings.
The Display Settings window appears.
3 Follow the on-screen instructions to change the settings.
✍
Additionally, you can set the display colors and resolution for each display and customize the Multiple Monitors mode.
86
nN
Using Peripheral Devices
Page 87
87
nN
Using Peripheral Devices
Connecting an External Microphone
If you need to use a sound input device (for example, to chat over the Internet) you need to plug in an external microphone
(not supplied).
To connect an external microphone
Plug the microphone cable (1) into the microphone jack (2) m.
✍
Make sure your microphone is designed for computer use.
Page 88
Using Peripheral Devices
Connecting a Universal Serial Bus (USB) Device
To prevent your computer and/or USB devices from damage, observe the following:
❑ When moving the computer with USB devices connected, avoid any shock or force to the USB ports.
❑ Do not put the computer into a bag or carrying case when it has USB devices connected.
Connecting a USB Mouse
To connect a USB mouse
1 Choose the USB port (1) you prefer to use.
2 Plug the USB mouse cable (2) into the USB port.
You can now use your USB mouse (not supplied) (3).
88
nN
Page 89
Connecting a USB Floppy Disk Drive
You can purchase a USB floppy disk drive and connect it to your computer.
To connect a USB floppy disk drive
1 Choose the USB port (1) you prefer to use.
2 Plug the USB floppy disk drive cable (2) into the USB port.
Your USB floppy disk drive (3) is now ready for use.
!
When using a USB floppy disk drive, do not apply force on the USB port. This may cause a malfunction.
89
nN
Using Peripheral Devices
Page 90
90
nN
Using Peripheral Devices
Disconnecting a USB floppy disk drive
You can disconnect a USB floppy disk drive when your computer is on or off. Disconnecting the drive when the computer is
in a power saving mode (Sleep or Hibernate) may cause the computer to malfunction.
If the computer is off, you can unplug the USB cable directly from the computer.
To disconnect a USB floppy disk drive
1 Close all programs accessing the floppy disk drive.
2 Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.
3 Select the floppy disk drive you want to unplug.
4 Click Stop.
The Stop a Hardware device window appears.
5 Confirm that the floppy disk drive can be safely removed from the system.
6 Click OK.
A message appears stating it is now safe to remove the hardware device.
7 Click OK.
8 Click Close to close the Safely Remove Hardware window.
9 Disconnect the floppy disk drive from the computer.
Page 91
Using Peripheral Devices
Connecting a Printer
You can connect a Windows-compatible printer to your computer to print documents.
Connecting a Printer Using the USB Port
You can connect a USB printer compatible with your version of Windows to the computer.
To connect a printer using the USB port
1 Plug the power cord (1) of your printer into an AC outlet.
2 Choose the USB port (3) you prefer to use.
3 Plug one end of a USB printer cable (2) (not supplied) into the USB port and the other end to your printer.
91
nN
Page 92
92
nN
Using Peripheral Devices
Connecting an i.LINK Device
Notes on connecting i.LINK devices
❑ You need the supplied port replicator to connect an i.LINK device, such as a digital video camcorder, or another VAIO
computers in order to copy, delete or edit files.
❑ The i.LINK port on the port replicator does not supply power to external devices generally powered by i.LINK ports.
❑ The i.LINK port supports transfer rates up to 400 Mbps; however, the actual transfer rate depends on the transfer rate of
the external device.
❑ The optional i.LINK cables may not be available, depending on the country or area of your residency.
❑ An i.LINK connection with other compatible devices is not fully guaranteed.
❑ The i.LINK connection varies depending on the software applications, operating system, and i.LINK-compatible devices
you use. See the manual that came with your software for more information.
❑ Check the working conditions and OS compatibility of i.LINK-compatible PC peripherals (for example, an HDD or a CD-
RW drive) before you connect them to your computer.
Connecting a Digital Video Camcorder
The connection and video import procedures vary depending on the digital video camcorder and the software that you use.
See the manual that came with your digital video camcorder for the detailed instructions.
Page 93
93
nN
Using Peripheral Devices
Connecting to a Network (LAN)
You need the supplied port replicator or display/LAN adapter to connect your computer to 100BASE-TX/10BASE-T-type
networks with an Ethernet network cable. Connect one end of a network cable (not supplied) to the network (Ethernet) port
on the port replicator or on the display/LAN adapter and the other end to your network. For detailed settings and devices
needed to connect to the network, ask your network administrator.
✍
Your computer can be connected to the network with the default settings.
!
Telephone lines cannot be connected to the network (LAN) connector on your computer.
If the network (LAN) connector is connected to the telephone lines mentioned below, high electric current to the connector may cause damage,
overheating, or fire.
- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)
- Public telephone subscriber line
- PBX (private branch exchange)
Do not plug a telephone cable into the network port.
Page 94
94
nN
Customizing Your VAIO Computer
Customizing Your VAIO Computer
This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn
how to use and customize the look of your Sony software and utilities, etc.
❑ Setting the Password (page 95)
❑ Using Fingerprint Authentication (page 102)
❑ Setting Up Your Computer with VAIO Control Center (page 123)
❑ Using the Power Saving Modes (page 124)
❑ Managing Power with VAIO Power Management (page 128)
Page 95
95
nN
Customizing Your VAIO Computer
Setting the Password
In addition to the Windows password, you can use one of the BIOS functions to set a power-on password to protect your
computer.
Once you have set the power-on password, you will have to enter the password after the VAIO logo appears to start your
computer. The power-on password will allow you to protect the computer from unauthorized access.
Adding the Power-on Password
The power-on password is provided to protect your computer from unauthorized access.
There are two types of the power-on password: machine password and user password. The machine password is provided
for users with administrator rights on the computer to change all the setup options on the BIOS setup screen, as well as to
start the computer. The user password is provided for other standard users to allow for changing some of the BIOS setup
options, as well as starting the computer. To set the user password, you must first set the machine password.
!
Once you have set the power-on password, you cannot start your computer without entering the password. Make sure not to forget the password. Write
down your password and keep it safe and private from other people.
If you forget the power-on password and need assistance to reset it, a password reset fee will be charged, and your computer may need to be sent in
for depot service for password reset.
✍
If you have set the power-on password in conjunction with the fingerprint authentication functionality, you can substitute fingerprint recognition for
password entry when turning on your computer. For more information, see Using Fingerprint Authentication (page 102).
Page 96
96
nN
Customizing Your VAIO Computer
To add the power-on password (machine password)
1 Turn on the computer.
2 Press and hold the Fn key and press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer, press and hold the Fn key and press F2 key several times
when the VAIO logo appears.
3 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the
Enter key.
4 On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters (including spaces) long.
5 Select Password when Power On under Security.
Press the space bar to change the setting from Disabled to Enabled.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Page 97
97
nN
Customizing Your VAIO Computer
To add the power-on password (user password)
!
Make sure you set the machine password before setting the user password.
1 Turn on the computer.
2 Press and hold the Fn key and press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer, press and hold the Fn key and press F2 key several times
when the VAIO logo appears.
3 Enter the machine password for Enter Password and press the Enter key.
4 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.
5 On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters (including spaces) long.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Page 98
98
nN
Customizing Your VAIO Computer
Changing/Removing the Power-on Password
To change or remove the power-on password (machine password)
1 Turn on the computer.
2 Press and hold the Fn key and press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer, press and hold the Fn key and press F2 key several times
when the VAIO logo appears.
3 Enter the machine password for Enter Password and press the Enter key.
4 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the
Enter key.
5 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Page 99
99
nN
Customizing Your VAIO Computer
To change or remove the power-on password (user password)
1 Turn on the computer.
2 Press and hold the Fn key and press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer, press and hold the Fn key and press F2 key several times
when the VAIO logo appears.
3 Enter the user password for Enter Password and press the Enter key.
4 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.
5 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Page 100
100
nN
Customizing Your VAIO Computer
Adding the Windows Password
The Windows password comes in handy when you have to share a single computer with other people. By setting the Windows
password, you can protect your user account from unauthorized access.
Entry of the Windows password will be prompted after you select your user account.
!
Make sure not to forget the password. Write down your password and keep it safe and private from other people.
✍
If you have set the Windows password in conjunction with the fingerprint authentication functionality, you can substitute fingerprint recognition for
password entry when turning on your computer. For more information, see Using Fingerprint Authentication (page 102).
To add the Windows password
1 Click Start and Control Panel.
2 Click the User Accounts and Family Safety icon.
3 Click the User Accounts icon.
4 Click Create a password for your account under Make changes to your account.
5 In the New password and Confirm new password fields, enter the password for your account.
6 Click Create password.
✍
See Windows Help and Support for more information on the Windows password.
Loading...