Sony vgn-ux Service Manual

1.MS-1-D.1

Chapter 1. Disassembly & Assembly Guide

1-3. Disassembly & Assembly

- Main Section -

MS-1 Main Section Disassembly

Except 1seg Tuner / Wireless WAN Model

2

Confidential

[MA]

UX Series

1.MS-1-D.2

Battery Pack

Confidential

1)

Battery Pack

Lever

Turn over the main unit, and slide the lever in the direction of
the arrow to release the lock.

2)

Battery Pack

In the state of 1), remove the Battery Pack in the direction of the arrow.

UX Series

1.MS-1-D.3

Cap (Stick Pointer)

1)

3

Cap(Stick Pointer)

Remove the Cap.

Confidential

[MA]

Remark

JModel

CModel

Cap (Stick Pointer)

Shape of the Cap

* There are two kinds of Cap for J Model.
When replacing the Cap, be sure to use the Cap of the same
shape and color as one used in the repair set.

[MA]

3

UX Series

[MA]

1.MS-1-D.3(a)

3

Dummy Card, Stylus

Confidential

1)

Dummy Card

Remove the Dummy Card.

2)

Stylus

Turn over the main unit and remove the Stylus.

UX Series

1.MS-1-D.4

Housing (Bottom)

Confidential

1)

3)

Cover (Bottom Screw)

While disengaging the detent (two places), remove the Cover.

Housing (Bottom)

2)

Screw: Blue-B6 / Green-B7 / Red-B8

Remove the six screws.

Remove the Housing.

UX Series

1.MS-1-D.5

Parts of the Housing (Bottom)

Confidential

1)

3)

1

[ADD]

Remove the two screws.

2)

Screw: B1

Cover (Bottom)

While disengaging the detent (three places), remove the Cover.

Screw: B1

Remove the one screw.

UX Series

1.MS-1-D.6

Attachment

1)

Confidential

2)

HDD Model

Sheet(Bottom)

Peel off the Sheet.

*HDD Model - Two places

Flash Memory Model - One place

Flash Memory Model

HDD Model Flash Memory Model

[ADD]

4

Kapton Tape

Tape(Harness)

Peel off the Tape.

*HDD Model - Tape (one place), Kapton Tape(One place)

Flash Memory Model -Tape (Two places)

Tape(Harness)

[ADD]

4

Tape(Harness)

UX Series

1.MS-1-D.7

Wireless LAN Card

Confidential

1)

Antenna(2.4/5GHz For Right)

Coaxial Cable

Disconnect the Antenna (one place) and the terminal of the Coaxial
Cable (two places) vertically.

2

[COR]

2)

Wireless LAN Card

Remove the one screw and then the Wireless LAN Card.

Screw: B4

UX Series

1.MS-1-D.8

[MA]

3

Confidential

1)

2)

HDD

HDD Model

Screw: B1

Bracket (HDD)

Remove the five screws and the Bracket.

Lock Lever

HDD

FPC

1. Raise the lock lever and release the lock.

2. While disconnecting the FPC, remove the HDD.

UX Series

1.MS-1-D.9

[MA]

3

Confidential

Parts of the HDD

1)

Cushion (HDD)

HDD Model

HDD

Remove the Cushion (two places).

UX Series

1.MS-1-D.9(a)

Confidential

1)

2)

SSD

Flash Memory Model

Remove the five screws.

[MA]

3

Screw:B1

SSD

Lock Lever

FPC

1. Raise the lock lever to release the lock.

2. While removing the FPC, remove the SSD.

UX Series

1.MS-1-D.9(b)

Confidential

Parts of the SSD

1)

Flash Memory Model

Remove the two screws.

Screw:B2

3

[MA]

2)

Bracket(MT R)

Bracket(MT F)

SSD

Remove the SSD.

UX Series

1.MS-1-D.10

Lithium Battery, Bracket (MS), Cover (WLB)

Confidential

1)

Adhesive Tape

3)

Bracket (MS)

Lithium Battery

Connector

Disconnect the connector and remove the Lithium Battery.

* The Lithium Battery is secured with adhesive tape.

2)

Keyboard ASSY

Lock Lever

Raise the lock lever to release the lock and remove the Keyboard ASSY.

4)

Cover (WLB)

Sheet (Fan MS)

Keyboard ASSY

1. Turn over the Keyboard ASSY and the Sheet (one place).

2. Disengage the detent (two places) and remove the Bracket.

Disengage the detent (six places) and remove the Cover.

UX Series

1.MS-1-D.11

Mother Board

Confidential

1)

Microphone

Remove the Microphone.

2)

Connector

Mother Board

FPC *1

While releasing the connectors and disconnecting the FPC,
remove the Mother Board.

*1: The FPC is connected to the Mother Board.

UX Series

1.MS-1-D.12

Palmrest, LCD Section

Confidential

1)

3)

Bracket (SWX R)

Cover (Screw Palmrest)

Peel off the Cover (two places).

Screw: B14

2)

Screw: B1

Remove the two screws.

4)

Palmrest

Remove the two screws and the Bracket.

LCD

While disengaging the detent (four places), remove the Palmrest.

UX Series

Confidential

Update History

Date Contents Version No.

2006.06.08 [ADD] Procedure (Page 5) 1.10

2006.06.27

2006.07.05 [MA] (Page 3, 3(a), 6, 8, 9, 9(a), 9(b)) 1.30

2006.09.04 [ADD] Procedure (Page 6) 1.40

[ADD]---Addition [DEL]---Deletion [CHG]---Change [COR]---Correction [MA]---Model Addition

1

[MA] (Page 1)

2

[COR] Description (Page 7)

3

4

1.20

UX Series