Sony VGN-SZ640, VGN-SZ640E, VGN-SZ640N, VGN-SZ640N/B, VGN-SZ645P User Guide

User Guide

Personal Computer

VGN-SZ600 Series

N

Contents

Before Use .........................................................................................................................................................................6

Documentation .............................................................................................................................................................6

Ergonomic Considerations...........................................................................................................................................9

Getting Started .................................................................................................................................................................11

Locating Controls and Ports.......................................................................................................................................12

About the Indicator Lights ..........................................................................................................................................18

Connecting a Power Source ......................................................................................................................................20

Using the Battery Pack ..............................................................................................................................................21

Shutting Down Your Computer Safely .......................................................................................................................27

Using Your VAIO Computer .............................................................................................................................................28

Using the Keyboard ...................................................................................................................................................29

Using the Touch Pad .................................................................................................................................................31

Using Special-function Buttons ..................................................................................................................................32

Using the Built-in MOTION EYE Camera...................................................................................................................33

Using the Optical Disc Drive ......................................................................................................................................34

Using PC Cards .........................................................................................................................................................43

Using the ExpressCard Module .................................................................................................................................46

Using the Memory Stick Media ..................................................................................................................................50

Using Other Memory Cards .......................................................................................................................................56

Using the Internet.......................................................................................................................................................59

Using Wireless LAN (WLAN) .....................................................................................................................................60

Using the Bluetooth Functionality ..............................................................................................................................67

2

nN

3

nN

Using Peripheral Devices .................................................................................................................................................74

Connecting a Docking Station....................................................................................................................................75

Connecting External Speakers ..................................................................................................................................84

Connecting an External Display.................................................................................................................................85

Selecting Display Modes............................................................................................................................................89

Using the Multiple Monitors Function.........................................................................................................................92

Connecting an External Microphone..........................................................................................................................94

Connecting a Universal Serial Bus (USB) Device......................................................................................................95

Connecting a Printer ..................................................................................................................................................98

Connecting an i.LINK Device .....................................................................................................................................99

Connecting to a Network (LAN) ...............................................................................................................................101

Customizing Your VAIO Computer ................................................................................................................................103

Selecting Performance Modes .................................................................................................................................104

Setting the Password ...............................................................................................................................................105

Using Fingerprint Authentication..............................................................................................................................116

Using Trusted Platform Module (TPM).....................................................................................................................124

Setting Up Your Computer with VAIO Central .........................................................................................................131

Using VAIO Status Monitor ......................................................................................................................................132

Using the Power Saving Modes...............................................................................................................................133

Managing Power with VAIO Power Management ....................................................................................................138

Protecting the Hard Disk ..........................................................................................................................................141

Upgrading Your VAIO Computer....................................................................................................................................142

Adding and Removing Memory................................................................................................................................143

4

nN

Precautions ....................................................................................................................................................................150

On Handling the LCD Screen ..................................................................................................................................151

On Using the Power Source ....................................................................................................................................152

On Handling Your Computer....................................................................................................................................153

On Using the Built-in MOTION EYE Camera...........................................................................................................155

On Handling Floppy Disks .......................................................................................................................................156

On Handling Discs ...................................................................................................................................................157

On Using the Battery Pack.......................................................................................................................................158

On Using Headphones.............................................................................................................................................159

On Handling Memory Stick Media............................................................................................................................160

On Handling the Hard Disk ......................................................................................................................................161

On Handling the Memory Card Adapter...................................................................................................................162

On Updating Your Computer ...................................................................................................................................163

Troubleshooting .............................................................................................................................................................164

Computer .................................................................................................................................................................166

System Security .......................................................................................................................................................173

Battery......................................................................................................................................................................174

Built-in MOTION EYE Camera.................................................................................................................................176

Internet.....................................................................................................................................................................179

Networking ...............................................................................................................................................................181

Bluetooth Technology ..............................................................................................................................................184

Optical Discs ............................................................................................................................................................188

Display .....................................................................................................................................................................192

Printing.....................................................................................................................................................................196

5

nN

Microphone ..............................................................................................................................................................197

Mouse ......................................................................................................................................................................198

Speakers..................................................................................................................................................................199

Touch Pad................................................................................................................................................................201

Keyboard..................................................................................................................................................................202

Floppy Disks ............................................................................................................................................................203

PC Cards .................................................................................................................................................................204

Audio/Video..............................................................................................................................................................206

Memory Stick Media ................................................................................................................................................207

Peripherals ...............................................................................................................................................................208

Docking Station ........................................................................................................................................................209

Support Options .............................................................................................................................................................210

Sony Support Information ........................................................................................................................................210

Program Support Information...................................................................................................................................213

nN

Before Use

Before Use

Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has
combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal
computing.

!

External views illustrated in this manual may look slightly different from those of your computer.

Documentation

Your documentation includes printed information and user guides to read on your VAIO computer.

Printed Documentation

❑ Welcome mat — Contains an overview of component connection, set-up information, etc.
❑ Safety Information — Contains safety guidelines and owner information.

6

7

nN

Before Use

Non-printed Documentation

❑ User Guide (this manual) — Explains features of your computer. It also includes information about the software programs

included with your computer, as well as information on solving common problems.

❑ Specifications — The online Specifications describe the hardware and software configurations of your VAIO computer.

To view the online Specifications:

1 Connect to the Internet.
2 Go to the Sony online support Web site at the following URLs:

http://esupport.sony.com/EN/VAIO/
http://www.sony.ca/support

for customers in Canada

http://esupport.sony.com/ES/VAIO/
http://esupport.sony.com/ES/VAIO/BR/

❑ VAIO Recovery Center User Guide — Provides information about restoring individual software programs, software

drivers, and drive partition(s) or your entire hard disk drive to the original factory installed settings.
To access this on-screen guide:

1 Click Start and Help and Support.
2 Click Manuals & Specifications.
3 Click VAI O Recovery Center User Guide.

™

❑ SmartWi

Connection Utility Help (Selected models only) — Provides information about setting up Bluetooth, wireless

LAN, and wireless WAN functionalities.
To access this on-screen guide:

1 Click Start, All Programs, and SmartWi Connection Utility.
2 Click SmartWi Connection Utility Help.

for customers in USA

for customers in Spanish speaking Latin American countries or areas

for customers in Brazil

8

nN

Before Use

Help and Support

Help and Support is easy to access and provides a single location for information and technical assistance for your VAIO
computer. Choose from the following categories to find the answers you need.

To access Help and Support, click Start and Help and Support.

❑ Manuals & Specifications

Here you will find the on-screen User Guide, warranty information, other VAIO documents, and system and software
information for your computer.

❑ VAIO Support

Access interactive help in the form of VAIO tutorials, an escalation page containing support and contact information, and
various links to VAIO online support Web sites.

❑ Backup & Recovery

Find information on how to back up and restore your operating system, system software, and your personal data.

❑ Wireless & Networking

Learn about wireless connections including Bluetooth Wireless technology and Wireless LAN. Run utilities that include
VAIO Media Setup and Windows Network and Sharing Center, and access to wireless tutorials.

❑ Security

Keep your data safe and your computer running efficiently with updates and maintenance programs from Microsoft and
Sony.

❑ VAIO Sites

Contains links to other Internet sites you might find interesting and useful.

9

nN

Before Use

Ergonomic Considerations

You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt
to take account of the following ergonomic considerations for both stationary and portable environments:

❑ Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your

wrists in a neutral, comfortable position (3) while using the keyboard, touch pad, or external mouse. Let your upper arms
hang naturally at your sides. Have breaks during sessions with your computer. Excessive use of the computer may strain
eyes, muscles, or tendons.

❑ Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the

floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning
far backwards.

10

nN

Before Use

❑ Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye

strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display
as well.

❑ Lighting – Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect

lighting to avoid bright spots on the display. Proper lighting adds to your comfort and work efficiency.

❑ Positioning an external display – When using an external display, set the display at a comfortable viewing distance.

Make sure the display screen is at eye level or slightly lower when you are sitting in front of the monitor.

Getting Started

Getting Started

This section describes how to get started using your VAIO computer.

!

Before starting your computer for the first time, do not connect any other hardware that did not originally come with your computer. Be sure to start
up your computer with only the supplied accessories connected and set up your system. Upon completion, connect one device (for example, a printer,
an external hard disk drive, a scanner, and so on) at a time, following the manufacturers' instructions.

❑ Locating Controls and Ports (page 12)
❑ About the Indicator Lights (page 18)
❑ Connecting a Power Source (page 20)
❑ Using the Battery Pack (page 21)
❑ Shutting Down Your Computer Safely (page 27)

11

nN

Locating Controls and Ports

Take a moment to identify the controls and ports shown on the following pages.

!

Please note that the illustrations in this manual may not necessarily apply to your model.

Front

12

nN

Getting Started

A Built-in MOTION EYE camera
B Built-in microphone (monaural)
C Built-in MOTION EYE camera indicator

D LCD screen (page 151)
E Built-in speakers (stereo)
F Keyboard (page 29)
G Touch pad (page 31)
H Fingerprint sensor (page 116)

* On selected models only.

*

(page 33)

*

*

(page 18)

Power indicator (page 18)

A
B Battery indicator (page 18)
C Hard disk drive indicator (page 18)
D WLAN (Wireless LAN) indicator (page 18)

E WWAN (Wireless WAN) indicator

*

(page 18)

F Bluetooth indicator (page 18)
G S1/S2 buttons (page 32)
H STAMINA mode indicator (page 18)
I Performance selector switch (page 104)
J SPEED mode indicator (page 18)
K WIRELESS switch (page 60)
L Num lock indicator (page 18)
M Caps lock indicator (page 18)
N Scroll lock indicator (page 18)
O Power button

* On selected models only.

13

nN

Getting Started

Back

A DC IN port (page 20)
B Battery connector (page 21)
C Air vents
D Security slot

14

nN

Getting Started

Right

A Optical disc drive (page 34)
B Optical disc drive indicator (page 18)
C Manual eject hole (page 188)
D Drive eject button (page 34)

E ExpressCard/34
F Hi-Speed USB (USB 2.0) ports

slot (page 46)

*1

(page 95)

G Network (Ethernet) port (page 101)
H Modem port (page 59)

I WWAN antenna

*1

Support high-/full-/low- speeds.

*2

On selected models only.

*2

(page 60)

15

nN

Getting Started

Left

16

nN

Getting Started

A Microphone jack (page 94)
B Headphones jack (page 84)
C Air vents
D i.LINK (IEEE 1394) S400 port (page 99)
E Monitor (VGA) port (page 86)
F PC Card slot (page 43)
G PC Card release button (page 45)
H Memory Stick Duo/PRO Duo media indicator (page 18)

I Memory Stick Duo/PRO Duo media slot

* Your computer supports Memory Stick Duo media and Memory Stick PRO

Duo media with high speed and high capacity capabilities.

*

(page 51)

Bottom

A Docking station connector (page 76)
B Air vents

17

nN

Getting Started

Getting Started

About the Indicator Lights

Your computer is equipped with the following indicator lights.

Indicator Functions

Power 1 Illuminates when the power of the computer is on, blinks when the computer is in Sleep mode, and turns off

when the computer is in Hibernate mode or off.

Battery e Illuminates when the computer is using battery power, blinks when the battery pack is running out of power, and

Memory Stick Duo/PRO Duo media Illuminates when data is read from or written to the Memory Stick media in the Memory Stick Duo/PRO Duo

Built-in MOTION EYE camera

Optical disc drive Illuminates when data is read from or written to the optical disc media. When the indicator is off, the optical disc

STAMINA mode Illuminates when the computer is in STAMINA mode to conserve battery power.

SPEED mode Illuminates when the computer is in SPEED mode to provide faster performance.

Hard disk drive

Num lock

Caps lock

double-blinks when the battery pack is charging.

media slot. (Do not enter Sleep mode or turn off the computer when this indicator is on.) When the indicator is

off, the Memory Stick media is not being used.

*

Illuminates while the built-in MOTION EYE camera is in use.

media is not being used.

Illuminates when data is read from or written to the hard disk drive. Do not enter Sleep mode or turn off the

computer when this indicator is on.

Press the Num Lk key to activate the numeric keypad. Press it a second time to deactivate the numeric keypad.

The numeric keypad is not active when the indicator is off.

Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key

while the indicator is on. Press the key a second time to turn off the indicator. Normal typing resumes when the

Caps lock indicator is off.

18

nN

Indicator Functions

Scroll lock

Bluetooth technology

Wireless LAN Illuminates when the wireless LAN functionality is enabled.

Wireless WAN

* On selected models only.

*

Press the Scr Lk key to change how you scroll the display. Normal scrolling resumes when the Scroll lock

indicator is off. The Scr Lk key functions differently depending on the program you are using and does not work

with all programs.

Illuminates when the WIRELESS switch is set to ON and Bluetooth technology is enabled.

Illuminates when the wireless WAN functionality is enabled.

19

nN

Getting Started

20

nN

Getting Started

Connecting a Power Source

You can use either an AC adapter or a rechargeable battery pack as a power source for your computer.

Using the AC Adapter

✍

Use your computer only with the supplied AC adapter.

To use the AC adapter

1 Plug one end of the power cord (1) into the AC adapter (3).
2 Plug the other end of the power cord into an AC outlet (2).
3 Plug the cable attached to the AC adapter (3) into the DC IN port (4) on the computer or on the optional docking station.

!

The shape of the DC In plug varies depending on the AC adapter.

✍

To disconnect your computer completely from AC power, unplug the AC adapter.

Make sure that the AC outlet is easily accessible.

If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page 136).
This power saving mode saves the time of shutting down or resuming.

Using the Battery Pack

The battery pack supplied with your computer is not fully charged at the time of delivery.

Installing the Battery Pack

To install the battery pack

1 Turn off the computer and close the LCD screen lid.
2 Slide the battery lock switch (1) inward.

3 Slide the battery pack into the battery compartment until it clicks into place.

21

nN

Getting Started

4 Slide the battery lock switch (1) to the LOCK position to secure the battery pack on the computer.

✍

When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.

!

This computer is designed to operate only with genuine Sony batteries.

22

nN

Getting Started

Getting Started

Charging the Battery Pack

The battery pack supplied with your computer is not fully charged at the time of delivery.

To charge the battery pack

1 Install the battery pack.
2 Connect the AC adapter to the computer.

The computer automatically charges the battery pack (the battery indicator light flashes in a double blink pattern as the
battery pack charges). When the battery pack charges close to the maximum charge level you selected with the battery
care function, the battery indicator turns off. To select your desired maximum charge level with the battery care function,
see To use the battery care function (page 25).

Battery indicator light status Meaning

On The computer is using battery power.

Blinks The battery pack is running out of power.

Double blinks The battery pack is charging.

Off The computer is using AC power.

23

nN

24

nN

Getting Started

!

Charge the battery pack as described in this manual from your first battery charge.

✍

When the battery pack is running out of power, both the battery and power indicator lights blink.

Keep the battery pack in your computer while it is directly connected to AC power. The battery pack continues to charge while you are using the
computer.

If the battery level falls below 10%, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a
fully charged battery pack.

The battery pack supplied with your computer is a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack
does not affect its battery life.

The battery indicator light is on while you use the battery pack as a power source. When battery life is nearly depleted, both the battery and power
indicator lights start flashing.

For some software applications and some peripheral devices, your computer may not enter Hibernate mode even when battery life is low. To avoid loss
of data when using battery power, you should save your data frequently and manually activate a power management mode, such as Sleep or Hibernate.

If the battery pack wears out when the computer enters Sleep mode, you will lose any unsaved data. Going back to the previous work state is impossible.
To avoid loss of data, you should save your data frequently.

When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.

To use the battery care function

You can select your desired maximum charge level with the battery care function to reduce battery degradation.
1 Click Start, All Programs, and VAIO Central.

The VAIO Central window appears.

2 Double-click Power Management and Battery Care Function.
3 Click to select the Enable Battery Care Function check box.
4 Select the desired maximum charge level.
5 Click OK.

25

nN

Getting Started

Getting Started

Removing the Battery Pack

!

You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack
while the computer is in Sleep mode.

To remove the battery pack

1 Turn off the computer and close the LCD screen lid.
2 Slide the battery lock switch (1) inward.

3 Slide and hold the battery release latch (2) and slide the battery pack away from the computer.

26

nN

27

nN

Getting Started

Shutting Down Your Computer Safely

To avoid losing unsaved data, be sure to shut down your computer properly, as described below.

To shut down your computer

1 Turn off any peripherals connected to the computer.
2 Click Start, the arrow next to the Lock button, and Shut Down.

3 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off

automatically.
The power indicator light turns off.

Using Your VAIO Computer

This section describes how to get the most out of using your VAIO computer.

❑ Using the Keyboard (page 29)
❑ Using the Touch Pad (page 31)
❑ Using Special-function Buttons (page 32)
❑ Using the Built-in MOTION EYE Camera (page 33)
❑ Using the Optical Disc Drive (page 34)
❑ Using PC Cards (page 43)
❑ Using the ExpressCard Module (page 46)
❑ Using the Memory Stick Media (page 50)
❑ Using Other Memory Cards (page 56)
❑ Using the Internet (page 59)
❑ Using Wireless LAN (WLAN) (page 60)
❑ Using the Bluetooth Functionality (page 67)

28

nN

Using Your VAIO Computer

nN

Using Your VAIO Computer

Using the Keyboard

Your keyboard is very similar to a desktop computer keyboard, but has additional keys that perform model-specific tasks.

Combinations and Functions with the Fn Key

✍

Some keyboard functions can be used only after the operating system finished launching.

Combinations/Feature Functions

Fn + F1: wireless switching

Fn + % (F2): speaker switch Turns on and off the built-in speakers and the headphones.

Fn + 2 (F3/F4): volume Adjusts the volume level.

Fn + 8 (F5/F6): brightness control Adjusts the LCD brightness of your computer screen.

Fn + /T (F7): display output

*

Toggles among Bluetooth, wireless LAN, and wireless WAN functionalities.

To increase the volume, press Fn+F4 and then M or ,, or keep pressing Fn+F4.
To decrease the volume, press Fn+F3 and then m or <, or keep pressing Fn+F3.

To increase lighting intensity, press Fn+F6 and then M or ,, or keep pressing Fn+F6.
To decrease lighting intensity, press Fn+F5 and then m or <, or keep pressing Fn+F5.

Toggles among your computer screen, an external display, and simultaneous output to both.

29

Combinations/Feature Functions

Fn + (F10): zoom

Fn + (F12): Hibernate

* On selected models only.

30

nN

Using Your VAIO Computer

Changes the screen resolution to magnify/restore your computer's screen view.

✍

The magnified view is not as clear as the standard view, as it is implemented by applying a lower resolution
to the computer screen with a higher resolution.
This key combination may not work with graphic images as it magnifies the screen view by changing the
resolution.
The location and size of software windows may change when the screen view is magnified or the standard
view is restored because pressing this key combination changes the resolution.
When your computer's screen view is magnified, switching the view to the external display disables the
function and restores the standard view.

Provides for the lowest level of power consumption. When you execute this command, the
states of the system and the connected peripheral devices are written to the hard disk drive and
the system power is turned off. To return the system to its original state, use the power button
to turn on the power.
For details on power management, see Using the Power Saving Modes (page 133).

Using Your VAIO Computer

Using the Touch Pad

You can point to, select, drag, and scroll objects on the screen using the touch pad.

Action Description

Point Slide your finger on the touch pad (1) to place the pointer (2) on an item or object.

Click Press the left button (3) once.

Double-click Press the left button twice.

Right-click Press the right button (4) once. In many applications, this action displays a shortcut menu.

Drag Slide your finger on the touch pad while pressing the left button.

Scroll Slide your finger along the right edge of the touch pad to scroll vertically. Slide your finger along the bottom edge to scroll

horizontally (the scroll function is available only with applications that support a touch pad scroll feature).

✍

You can also use the fingerprint sensor for vertical scrolling while the Scroll lock indicator is lit. Press the Fn+Scr Lk keys to turn on
and off the indicator.

31

nN

Using Special-function Buttons

Your computer is equipped with special buttons to help you use specific functions of the computer.

Special-function button Functions

By default, the S1 button turns the volume on and off and the S2 button toggles among your computer screen,

S1/S2 buttons

an external display, and simultaneous output to both. You can change these button assignments in the
window for changing the S button assignments. To display this window, press and hold either button or launch
and navigate through VAIO Central.

32

nN

Using Your VAIO Computer

33

nN

Using Your VAIO Computer

Using the Built-in MOTION EYE Camera

Your computer may be equipped with a built-in MOTION EYE camera. See the online Specifications to find whether your
model is equipped with the built-in MOTION EYE camera.

The built-in MOTION EYE camera adds video functionality to instant messaging software and video editing software.
Turning on the computer activates the built-in MOTION EYE camera, so the computer is ready for a video conference using

such software.
Note that launching or exiting your instant messaging or video editing software does not activate or deactivate the built-in

MOTION EYE camera, respectively. Make sure that the camera is activated before using the software.

✍

The built-in MOTION EYE camera cannot be shared by more than one software application. If another software application is using the camera, exit the
application before using the built-in MOTION EYE camera.

When capturing an image in a dark place, click the VAIO Camera Utility icon on the taskbar and the Advanced Settings button and select the Low Light
check box on the Properties window. It decreases the frame rate and slows down the shutter speed to allow the camera to capture more light.

!

The viewer window may show some noises, for example horizontal streaks, if you view a rapid-moving object. This is normal and does not indicate a
malfunction.

You cannot operate the built-in MOTION EYE camera with the Microsoft Windows MovieMaker software.

34

nN

Using Your VAIO Computer

Using the Optical Disc Drive

Your computer is equipped with an optical disc drive.

To insert a disc

1 Turn on the computer.
2 Press the drive eject button (1) to open the drive.

The tray slides out.

3 Place a disc in the middle of the tray with the label side facing upward and gently push it until the disc clicks into place.

Using Your VAIO Computer

4 Close the tray by pushing it in gently.

!

Do not remove the optical disc when your computer is in a power saving mode (Sleep or Hibernate). Doing so may cause the computer to malfunction.

✍

If you plan to use an external optical disc drive, connect the drive before you launch any preinstalled disc operation program.

35

nN

36

nN

Using Your VAIO Computer

Reading and Writing Optical Discs

Your computer plays and records CDs, DVDs, or Blu-ray Discs™, depending on the model you purchased. Check your
specifications for the type of optical disc drive installed on your model. Use the table below to see which types of media your
optical disc drive supports.

37

nN

Using Your VAIO Computer

PR: playable and recordable
P: playable but not recordable
–: not playable or recordable

BD-R

*10

RE

–

*7

PR

*9

DVD± RW/
±R DL/RAM

CD-RW/

CD­ROM

PPPPPRPP–

PPPPPRPP–PPPP––

Video CDMusic CDCD

Extra

CD-R/RWDVD-

ROM

DVD­Video

BD­ROM

DVD-R/RWDVD+R/RWDVD+R DLDVD-R DLDVD-

RAM

PR

*1 *2

PR

PR

*5

PR

*6

PR

*3 *4

DVD- ROM

DVD-ROMPPPPPPP–PPPP––

*8

Blu-ray Disc P P P P

*1

Supports writing data to DVD-R discs compliant with DVD-R for General Version 2.0/2.1.

*2

Supports writing data to DVD-RW discs compliant with DVD-RW Version 1.1/1.2.

*3

The DVD±RW/RAM disc drive on your computer does not support the DVD-RAM cartridge. Use non-cartridge discs or discs with removable cartridge.

*4

Writing data to single-sided DVD-RAM discs (2.6 GB) compliant with DVD-RAM Version 1.0 is not supported.

PR

PPP

PR

*1 *2

PR

PR

*5

PR

*6

PR

*3 *4

DVD-RAM Version 2.2/12X-SPEED DVD-RAM Revision 5.0 disc is not supported.

*5

Writing data to DVD+R DL (Double Layer) discs is available only on discs supporting DVD+R DL (Double Layer) recording.

*6

Writing data to DVD-R DL (Dual Layer) discs is available only on discs supporting DVD-R DL (Dual Layer) recording.

*7

Supports writing data to BD-R Version 1.1 discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB) and BD-RE Version 2.1
discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB). The Blu-ray Disc drive on your computer does not support BD-RE
Version 1.0 discs and Blu-ray cartridge discs.

*8

Writing data to Ultra Speed CD-RW discs is not supported on models with the Blu-ray Disc drive.

*9

BD-R stands for Blu-ray Disc-Recordable in Version 1.1 format.

*10

BD-RE stands for Blu-ray Disc-Rewritable in Version 2.1 format.

/

38

nN

Using Your VAIO Computer

!

This product is designed to playback discs that conform to the Compact Disc Digital Audio standard specifications (CD Standard). A DualDisc is a two
sided disc product which mates DVD recorded material on one side with digital audio material on the other side. Be aware that the audio side (non-DVD
side) of a DualDisc may not play on this product because it does not conform to the CD Standard.

Due to the multiple formats of discs now available, when buying pre-recorded or blank discs for use with a VAIO computer, be sure to read the notices
on the disc packaging carefully to check both playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee

the compatibility of VAIO CD drives with discs that are not compliant with the official "CD" format standard (or "DVD" standard in relation to DVD drives,
or "Blu-ray Disc" standard in relation to Blu-ray Disc drives). USING NON-COMPLIANT DISCS CAN CAUSE FATAL DAMAGE TO YOUR VAIO PC OR
CREATE SOFTWARE CONFLICTS AND CAUSE SYSTEM HANGING.
For inquiries about disc formats, contact the individual publisher of the pre-recorded disc or the manufacturer of the recordable disc.

✍

8cm disc writing is not supported.

!

To play copyright protected Blu-ray Discs continuously, you need to update the AACS key. Note that the AACS key update requires Internet access.

As with other optical media devices, circumstances may limit compatibility or prevent Blu-ray Disc playback. VAIO computers may not support movie
playback on packaged media recorded in AVC or VC1 formats at high bit rates.

Region settings are required for movies and BD-ROM contents. If the region setting on the optical disc drive does not match the region coding on the
disc, playback is not possible.

Unless your external display is compliant with the High-bandwidth Digital Content Protection (HDCP) standard, you cannot play or view the contents
of copyright protected Blu-ray Discs.

Some contents may restrict video output to be standard definition or prohibit analog video output at all. It is strongly recommended that digital HDCP­compliant environment be implemented for optimum compatibility and viewing quality.

39

nN

Using Your VAIO Computer

Notes on writing data to a disc

❑ Use only Sony recommended software, which is preinstalled on your computer, to write data to a disc.

Other software programs may not be fully compatible and errors may result.

❑ To make data on a disc readable on the optical disc drive, you need to close the session before you eject it. To complete

this process, follow the instructions included with your software.

❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc

drive.

❑ Do not strike or shake your computer while writing data to a disc.
❑ Deactivate the screen saver and exit anti-virus software before writing data to a disc.
❑ Do not use memory-resident utility software while writing data to a disc. This may cause your computer to malfunction.
❑ Before using your software application to burn discs, make sure you exit and close all other applications.
❑ Do not switch to power saving modes while using the preinstalled software or any disc burning software.
❑ Connect and use the AC adapter to power your computer or make sure your battery pack is at least 50% charged.
❑ Make sure you use the same disc burning software to add data to a used disc. Use of different disc burning software for

additional data burning may cause a failure. For example, if you have a disc with data that you burned with the Roxio
Easy Media Creator software, use the Roxio Easy Media Creator software to add more data to the same disc.

40

nN

Using Your VAIO Computer

Notes on playing discs

To achieve optimum performance when playing discs, you should follow these recommendations.
❑ Some CD players and computers' optical disc drives may not be able to play audio CDs created with the CD-R or CD-RW

disc media.

❑ Some DVD players and computers' optical disc drives may not be able to play DVDs created with the DVD+R DL, DVD-

R DL, DVD+R, DVD+RW, DVD-R, DVD-RW, or DVD-RAM disc media.

❑ Do not use memory-resident utility software to speed up disc access when playing a disc. This may cause your computer

to malfunction.

❑ Do not switch to power saving modes while your computer is playing a disc.
❑ Region code indicators are labeled on the DVDs to indicate in which region and on what type of player you can play the

disc. If the DVD is labeled "all," this means that you can play this DVD in most regions of the world. If the region code for
your residence area is different from the label on the DVD disc or on the packaging, you cannot play the disc on your
computer.

Using Your VAIO Computer

Playing CDs

To play an audio CD

1 Insert a disc into the optical disc drive.
2 If nothing appears on the desktop, then click Start, All Programs, and the desired CD software to play the CD.

If the Audio CD window appears, click to select an option.

Copying Files to CDs

To copy files to a disc

!

Do not strike or shake your computer while writing data to a disc.

1 Insert a disc into the optical disc drive.

If the AutoPlay window appears, click Burn files to disc and follow the on-screen instructions until the empty disc folder
appears.

2 Open the folder that contains the file(s) you want to copy and drag them to the empty disc folder.
3 Close the disc folder.

41

nN

42

nN

Using Your VAIO Computer

Playing DVDs

To play a DVD

1 Close all running software applications.
2 Insert a DVD into the optical disc drive.
3 If nothing appears on the desktop, then click Start, All Programs, and the desired DVD software to play the DVD.

For instructions on how to use the software, see the help file on your DVD software.

Copying Files to DVDs

To copy files to a disc

1 Connect the AC adapter to the computer.
2 Insert a disc into the optical disc drive.
3 If nothing appears on the desktop, then click Start, All Programs, and the desired DVD software to copy files to the disc.

For instructions on how to use the software, see the help file on your DVD software.

Using PC Cards

PC Cards allow you to connect portable external devices to your computer.

Inserting a PC Card

!

Some PC Cards or their functions may not be compatible with your computer.

You do not need to shut down your computer before inserting or removing a PC Card.

To insert a PC Card

1 Push the PC Card release button so that the release button pops out.
2 Push the PC Card release button a second time so that the PC Card slot protector pops out.
3 Gently take hold of the protector and pull it out of the slot.
4 Insert the PC Card into the PC Card slot with the front label facing upward.
5 Gently push the PC Card into the slot all the way to the end.

The PC Card is automatically detected by your system.
The Safely Remove Hardware icon appears on the taskbar.

43

nN

Using Your VAIO Computer

Using Your VAIO Computer

!

Insert the PC Card slot protector to protect against debris entering the slot when not using a PC Card. Before moving your computer, make sure to
insert the PC Card slot protector into the slot.

✍

Some devices may not function properly if you continuously switch to Normal mode from Sleep or Hibernate mode. For some PC Cards, if you alternate
between Normal mode and Sleep or Hibernate mode while the card is inserted, you may find that the device connected to your system through the PC
card is not recognized. Restart your system to correct the problem.

While the card is inserted, your computer may not enter Hibernate mode but Sleep mode. We recommend that you remove the card before the computer
enters Hibernate mode.

Make sure you use the latest software driver provided by the PC Card manufacturer.

Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC
Card in the correct direction. See the manual that came with your PC Card for more information.

44

nN

45

nN

Using Your VAIO Computer

Removing a PC Card

Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not
work properly.

To remove a PC Card

✍

To remove a PC Card when your computer is off, skip steps 1 to 7.

1 Double-click the Safely Remove Hardware icon on the taskbar.

The Safely Remove Hardware window appears.

2 Select the hardware you want to unplug.
3 Click Stop.

The Stop a Hardware device window appears.
4 Confirm that the device can be safely removed from the system.
5 Click OK.

A message appears stating it is now safe to remove the hardware device.

6 Click OK.
7 Click Close to close the Safely Remove Hardware window.
8 Push the PC Card release button so that the release button pops out.
9 Push the PC Card release button a second time so that the PC Card pops out.
10 Gently take hold of the Card and pull it out of the slot.
11 If the PC Card release button is still out, push it back in all the way to the end.

nN

Using Your VAIO Computer

Using the ExpressCard Module

Your computer is equipped with either a Universal ExpressCard™ slot* or an ExpressCard™/34 slot* for transferring data
among digital cameras, camcorders, music players, and other audio/video devices. The former

™

ExpressCard
ExpressCard

/34 (34 mm wide) or ExpressCard™/54 (54 mm wide) module* as shown below; and the latter, an

™

/34 module* only.

can accommodate either an

46

❑ ExpressCard™/34 module

Your computer is equipped with an ExpressCard

* Referred to as the ExpressCard slot and the ExpressCard module in this manual.

*

❑ ExpressCard™/54 module

™

/34 slot*.

*

Using Your VAIO Computer

Inserting an ExpressCard Module

!

Your computer is delivered with a slot protector in the ExpressCard slot. Remove the slot protector before you use the slot.

Use care when inserting or removing the ExpressCard module from the slot. Do not force it in or out of the slot.

✍

You do not need to shut down your computer before inserting or removing the ExpressCard module.

To insert an ExpressCard module

1 Push the ExpressCard slot protector to pop it out.
2 Gently take hold of the ExpressCard slot protector and pull it out of the slot.
3 Hold the ExpressCard module with the arrow facing upward and pointing toward the ExpressCard slot.
4 Carefully slide the ExpressCard module (1) into the slot until it clicks into place.

Do not force it into the slot.

47

nN

Using Your VAIO Computer

!

Insert the ExpressCard slot protector to protect against debris entering the slot when not using an ExpressCard module. Before moving your computer,

be sure to insert the ExpressCard slot protector into the slot.

✍

If the module or adapter does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.

Make sure you use the most recent software driver provided by the ExpressCard module manufacturer.

48

nN

nN

Using Your VAIO Computer

Removing an ExpressCard Module

Follow the steps below to remove the ExpressCard module while your computer is on. If it is not removed properly, your
system may not work properly.

To remove an ExpressCard module

✍

To remove an ExpressCard module when your computer is off, skip steps 1 to 7.

1 Double-click the Safely Remove Hardware icon on the taskbar.

The Safely Remove Hardware window appears.

2 Select the hardware you want to unplug.
3 Click Stop.

The Stop a Hardware device window appears.
4 Confirm that the device can be safely removed from the system.
5 Click OK.

A message appears stating it is now safe to remove the device.

6 Click OK.
7 Click Close to close the Safely Remove Hardware window.
8 Push in the ExpressCard module toward the computer to pop it out.
9 Gently take hold of the ExpressCard module and pull it out of the slot.

49

50

nN

Using Your VAIO Computer

Using the Memory Stick Media

Your computer supports the Memory Stick media. Memory Stick media is a compact, portable, and versatile IC recording
media especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile
phones and other devices. Because it is removable, it can be used for external data storage.

For the latest information about the Memory Stick media, visit the Memory Stick Web site at http://www.memorystick.com/en/

!

Your computer has been tested and found compatible with the Sony branded Memory Stick media with capacity of up to 8 GB that are available as of

January 2007. However, not all Memory Stick media that meet the same conditions as the compatible media are guaranteed of compatibility.

Inserting a Memory Stick media with multiple conversion adapters is not guaranteed of compatibility.

MagicGate is the general name of the copyright protection technology developed by Sony. Use a Memory Stick media with the MagicGate logo to use

this feature.

.

51

nN

Using Your VAIO Computer

Inserting a Memory Stick Media

There are two ways you can insert a Memory Stick media into your computer.
❑ Using the Memory Stick Duo/PRO Duo media slot

The Memory Stick media slot accommodates a small-size Memory Stick media: Memory Stick Duo or Memory Stick PRO

Duo media.
❑ Using the ExpressCard slot

To insert a standard-size Memory Stick media, use the ExpressCard slot. To do this, you need the supplied memory card

adapter. See Using the ExpressCard Module (page 46) and Using Other Memory Cards (page 56) for more

information.

To insert a Memory Stick media using the Memory Stick Duo/PRO Duo media slot

1 Hold the Memory Stick media with the arrow facing upward and pointing toward the Memory Stick Duo/PRO Duo media

slot.
2 Carefully slide the Memory Stick media into the slot until it clicks into place.

The Memory Stick media is automatically detected by your system and the content of the Memory Stick media is

displayed. If nothing appears on the desktop, click Start, Computer, and double-click the Memory Stick media icon.

Using Your VAIO Computer

!

Be sure to hold the Memory Stick media with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer

or the Memory Stick media, do not force the Memory Stick media into the slot if you cannot insert it smoothly.

Do not insert more than one Memory Stick media into the slot. Improper insertion of the media may damage both your computer and the media.

✍

Your computer supports Memory Stick Duo media and is equipped with the Memory Stick Duo/PRO Duo media slot that is only compatible with the

duo-size media. For more information on the Memory Stick Duo media, visit the Memory Stick Web site at http://www.memorystick.com/en/

To view the contents of the Memory Stick media

1 Click Start and Computer to open the Computer window.
2 Double-click the Memory Stick media icon to view the list of data files saved in the Memory Stick media.

52

nN

.

Using Your VAIO Computer

To format a Memory Stick media

The Memory Stick media has been formatted in the factory default setting and is ready for use.
If you want to reformat the media with your computer, follow these steps.

!

Be sure to use the device that is designed to format the media and supports the Memory Stick media when formatting the media.

Formatting the Memory Stick media erases the entire data on the media. Before formatting the media, make sure that it does not contain your valuable

data.

Do not remove the Memory Stick media from the slot while formatting the media. This could cause a malfunction.

1 Carefully slide the Memory Stick media into the slot until it clicks into place.
2 Click Start and Computer to open the Computer window.
3 Right-click the Memory Stick media icon and select Format.
4 Click Restore device defaults.

!

The size of the allocation unit and file system may change.

Do not select NTFS from the File system drop-down list as it may cause a malfunction.

53

nN

✍

The formatting process will be completed more quickly if you select Quick Format in Format options.

5 Click Start.

6 At the confirmation prompt, click OK.

The formatting process starts.

!

It may take time to format the Memory Stick media depending on the media.

7 Once completed, click OK.
8 Click Close.

54

nN

Using Your VAIO Computer

Using Your VAIO Computer

Removing a Memory Stick Media

To remove a Memory Stick media from the Memory Stick Duo/PRO Duo media slot

1 Check that the Memory Stick Duo/PRO Duo media indicator is off.
2 Push the Memory Stick media in toward the computer.

The Memory Stick media ejects.

3 Pull the Memory Stick media out of the slot.

!

Always remove the Memory Stick media gently, or it may pop out unexpectedly.

Do not remove the Memory Stick media while the Memory Stick Duo/PRO Duo media indicator is turned on. If you do, you may lose data. Large volumes

of data may take time to load, so be sure the indicator is off before removing the Memory Stick media.

55

nN

56

nN

Using Your VAIO Computer

Using Other Memory Cards

Your computer is delivered with the memory card adapter for the ExpressCard slot to support the following memory cards
besides the ExpressCard module:

❑ Standard-size Memory Stick and Memory Stick PRO
❑ Secure Digital (SD)
❑ MultiMediaCard (MMC)
❑ xD-Picture Card

!

The MagicGate feature of the Memory Stick media and the Memory Stick PRO media is not supported.

The copyright protection and high-speed data transfer features of the SD memory card are not supported.

SD memory cards with capacity of up to 2 GB and SD High Capacity (SDHC) memory cards with capacity of up to 4 GB have been tested and found

compatible with your computer.

As for the Memory Stick PRO media, only Sony branded media is recommended to use with the adapter.

Your computer has been tested and found compatible only with major memory card media available as of January 2007. However, not all memory card

media that meet the same conditions as the compatible media are guaranteed of compatibility.

Using Your VAIO Computer

Inserting a Memory Card

To insert a memory card to the memory card adapter

1 Insert any one of the memory cards (2) to the memory card adapter (1).

!

Make sure to insert a memory card into the memory card adapter in the correct direction to avoid possible damage to the memory card adapter.

2 See Inserting an ExpressCard Module (page 47) to insert the memory card adapter into the ExpressCard slot.

57

nN

58

nN

Using Your VAIO Computer

Removing a Memory Card

To remove a memory card from the memory card adapter

See Removing an ExpressCard Module (page 49) to remove the memory card adapter from the ExpressCard slot. Then,
firmly grasp the extended part of the memory card and carefully pull it out of the memory card adapter.

59

nN

Using Your VAIO Computer

Using the Internet

Setting Up a Dial-up Internet Connection

Before you can connect to the Internet, you need to connect your computer to a telephone line with a telephone cable (not
supplied). Once you have set up your telephone cable connection, you are ready to connect to the Internet.

To connect a telephone cable

1 Plug one end of the phone cable (1) into the modem port on the computer.
2 Plug the other end into the wall jack (2).

✍

Your computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a

private branch exchange (PBX). Some of these connections may result in excess electrical current and could cause a malfunction in the internal modem.

If you connect a telephone cable coming through a splitter, the modem or connected device may not work properly.

To set up a dial-up connection to the Internet

1 Click Start and Control Panel
2 Click Connect to the Internet under Network and Internet.

The Connect to the Internet window appears.
3 Click Dial-up.
4 Follow the on-screen instructions.

60

nN

Using Your VAIO Computer

Using Wireless LAN (WLAN)

Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each
other through a network. A WLAN is a network in which a user can connect to a Local Area Network (LAN) through a wireless
(radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.

The Sony WLAN supports all normal Ethernet connectivity, but with the added benefits of mobility and roaming. You can still
access information, Internet/intranet and network resources, even in the middle of a meeting, or as you move from one place
to another.

You can communicate without an access point, which means that you can communicate with a limited number of computers
(ad-hoc). Or you can communicate through an access point, which allows you to create a full infrastructure network.

❑ Wireless WAN models

See the SmartWi Connection Utility Help for setting up wireless LAN and wireless WAN functionalities. For instructions

on how to access the SmartWi Connection Utility Help, see Non-printed Documentation (page 7).
❑ Other models

See the following for setting up wireless LAN functionality.

61

nN

Using Your VAIO Computer

✍

In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the

WLAN functionality, read the Safety Information carefully.

*

WLAN uses the IEEE 802.11a

/b/g standard or the draft form of the IEEE 802.11n* standard, which specifies the used technology. The standard includes

the encryption methods: Wired Equivalent Privacy (WEP), which is a security protocol, Wi-Fi Protected Access 2 (WPA2), and Wi-Fi Protected Access

(WPA). Proposed jointly by the IEEE and Wi-Fi Alliance, both WPA2 and WPA are specifications of standards based, interoperable security

enhancements that increase the level of data protection and access control for existing Wi-Fi networks. WPA has been designed to be forward

compatible with the IEEE 802.11i specification. It utilizes the enhanced data encryption TKIP (Temporal Key Integrity Protocol) in addition to user

authentication using 802.1X and EAP (Extensible Authentication Protocol). Data encryption protects the vulnerable wireless link between clients and

access points. Besides that, there are other typical LAN security mechanisms to ensure privacy, such as: password protection, end-to-end encryption,

virtual private networks, and authentication. WPA2, the second generation of WPA, provides stronger data protection and network access control and

is also designed to secure all versions of 802.11 devices, including 802.11b, 802.11a, 802.11g, and 802.11n, multi-band and multi-mode. In addition,

based on the ratified IEEE 802.11i standard, WPA2 provides government grade security by implementing the National Institute of Standards and

Technology (NIST) FIPS 140-2 compliant AES encryption algorithm and 802.1X-based authentication. WPA2 is backward compatible with WPA.

*See the online Specifications to see whether your model supports the IEEE 802.11a standard and/or the draft form of the IEEE 802.11n standard.

IEEE 802.11b/g is a wireless LAN standard, using the 2.4 GHz bandwidth. The IEEE 802.11g standard provides high-speed communications, faster than

the IEEE 802.11b standard.

IEEE 802.11a is a wireless LAN standard, using the 5 GHz bandwidth, and provides high-speed communications of up to 54 Mbps.

*

IEEE 802.11n is a wireless LAN standard, using the 2.4 or 5 GHz bandwidth, and provides high-speed communications of up to 300 Mbps

.

*Actual communication speed varies depending on your access point settings and so on.

Your computer may employ the Intel

IEEE 802.11n standard. To connect the computer with the Intel

IEEE 802.11n standard, the access point that supports the "Connect with Intel

®

Next-Gen Wireless-N technology* compliant with the IEEE 802.11a/b/g standard and the draft form of the

®

Next-Gen Wireless-N technology to an access point using the draft form of the

®

Centrino®" program is required.

*Employed only on models that support the draft form of the IEEE 802.11n standard.

62

nN

Using Your VAIO Computer

Wireless LAN devices using the 2.4 GHz bandwidth and the ones using the 5 GHz bandwidth cannot communicate with each other because the

frequencies are different.

The 2.4 GHz bandwidth used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference

from other devices that use the same bandwidth are employed on wireless LAN compatible devices, such interference may cause lower communication

speed, narrower communication range, or broken wireless connections.

The communication speed varies depending on the distance between communication devices, existence of obstacles between such devices, the device

configuration, the radio conditions, and the software in use. In addition, communications may be cut off depending on the radio conditions.

The communication range varies depending on the actual distance between communication devices, existence of obstacles between such devices, the

radio conditions, the ambient environment that includes existence of walls and materials of such walls, and the software in use.

Deploying IEEE 802.11b and IEEE 802.11g products on the same wireless network may reduce the communication speed due to radio interference.

Taking this into consideration, the IEEE 802.11g products are designed to reduce the communication speed to ensure communications with

IEEE 802.11b products. When the communication speed is not as fast as expected, changing the wireless channel on the access point may increase

the communication speed.

63

nN

Using Your VAIO Computer

Communicating without an Access Point (Ad-hoc)

An ad-hoc network is a network in which a LAN is created only by the wireless devices themselves, with no other central
controller or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc
network easily at home.

❑ If the wireless connection is initiated by the VAIO computer, channel 11 will be selected.
❑ If the wireless connection is initiated by peer wireless LAN equipment, the wireless LAN communication will make use of

the channel selected by the peer wireless LAN equipment.

64

nN

Using Your VAIO Computer

To communicate without an access point (ad-hoc)

!

You cannot select the 5 GHz bandwidth, which is used for the IEEE 802.11a standard, on ad-hoc networks.

The IEEE 802.11n standard, using the 2.4 or 5 GHz bandwidth, is not available on ad-hoc networks.

1 Turn on the WIRELESS or WIRELESS LAN switch.

The Wireless LAN indicator lights up.

2 Double-click ( / ) on the taskbar to display the Wireless Device Switch window. Select your desired wireless

option(s) and click OK.

3 Click Start and Control Panel.
4 Click View network status and tasks under Network and Internet.
5 Click Set up a connection or network on the left pane.

The Set up a connection or network window appears.
6 Select an option to specify the ad-hoc network settings and click Next.
7 Follow the on-screen instructions.

✍

See the online Specifications to see whether your model supports the Bluetooth functionality, the IEEE 802.11a/b/g standard, and/or the draft form of

the IEEE 802.11n standard.

65

nN

Using Your VAIO Computer

Communicating with an Access Point (Infrastructure)

An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access
point (not supplied), for example the Sony Access Point. The access point bridges the wireless and wired LAN and acts as a
central controller for the wireless LAN. The access point coordinates transmission and reception from multiple wireless
devices within a specific range.

The access point will select which channel to use on an infrastructure network.

!

For details on how to select the channel that will be used by the access point, see the manual that came with your access point.

66

nN

Using Your VAIO Computer

To connect to a wireless network

1 Make sure an access point is set up.

See the manual that came with your access point for more information.
2 Turn on the WIRELESS or WIRELESS LAN switch.

The Wireless LAN indicator lights up.

3 Double-click ( / ) on the taskbar to display the Wireless Device Switch window. Select your desired wireless

option(s) and click OK.

4 Right-click or on the taskbar and select Connect to a network.
5 Select the desired access point and click Connect.

✍

See the online Specifications to see whether your model supports the Bluetooth functionality, the IEEE 802.11a/b/g standard, and/or the draft form of

the IEEE 802.11n standard.

To disconnect from a wireless network

Turn off the WIRELESS or WIRELESS LAN switch.

!

Turning off the wireless LAN functionality while accessing remote documents, files, or resources may result in data loss.

✍

For WPA-PSK or WPA2-PSK authentication, you must enter a passphrase. The passphrase is case sensitive and must be between 8 and 63

alphanumeric characters long or up to 64 characters long using numbers from 0 to 9 and letters from A to F.

67

nN

Using Your VAIO Computer

Using the Bluetooth Functionality

You can establish wireless communication between your computer and other Bluetooth devices such as another computer
or a mobile phone. You can transfer data between these devices without cables and up to 33 feet (10 meters) range in open
space.

❑ Wireless WAN models

See the SmartWi Connection Utility Help for setting up Bluetooth functionality. For instructions on how to access the

SmartWi Connection Utility Help, see Non-printed Documentation (page 7).
❑ Other models

See the following for setting up Bluetooth functionality.

To connect to a Bluetooth device

1 Turn on the WIRELESS switch.

2 Double-click ( / ) on the taskbar to display the Wireless Device Switch window.
3 Select the Enable Bluetooth Device option.
4 Click OK.

68

nN

Using Your VAIO Computer

Notes on using the Bluetooth functionality

❑ The data transfer rate varies, depending on the following conditions:

❑ Obstacles, such as walls, located between devices

❑ Distance between devices

❑ Material used in walls

❑ Proximity to microwaves and cordless telephones

❑ Radio frequency interference and other environmental conditions

❑ Device configuration

❑ Type of software application

❑ Type of operating system

❑ Use of both wireless LAN and Bluetooth functionalities at the same time on your computer

❑ Size of file being exchanged
❑ Note that due to limitations of the Bluetooth standard, large files may occasionally be corrupted during continuous transfer

due to electromagnetic interference from the environment.
❑ All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained. Even if

standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange may

not be possible in all situations.
❑ As general characteristics of Bluetooth technology, video and audio may go out of synchronization if you play videos on

your computer with audio output from the connected Bluetooth device.

69

nN

Using Your VAIO Computer

❑ The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth

devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous

use of the Bluetooth functionality and wireless communication devices, however, may cause radio interference and result

in poorer communication speeds and distances than the standard values.
❑ The Bluetooth functionality may not work depending on the third party devices or the software version used by third party

companies.
❑ As general characteristics of Bluetooth technology, connecting multiple Bluetooth devices to your computer may cause

bandwidth congestion, resulting in poor performance of the devices.

Bluetooth Security

The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to
communicate. With the authentication function, you can avoid any anonymous Bluetooth device to access your computer.

The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be
determined for both devices to be registered. Once a device is registered, there is no need to re-enter the passkey.

✍

The passkey can be different each time, but must be the same at both ends.

For certain devices, such as a mouse, no passkey can be entered.

nN

Using Your VAIO Computer

Communicating with Another Bluetooth Device

You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a
mouse, or a digital camera without the use of any cables.

70

71

nN

Using Your VAIO Computer

To communicate with another Bluetooth device

To communicate with another Bluetooth device, you need first to set up the Bluetooth functionality. For setting up and using
the Bluetooth functionality, see the help file on the Bluetooth utility software.

To see the help file

1 Right-click the Bluetooth icon on the taskbar, and select Help from the menu.

Stopping the Bluetooth Connection

To stop the Bluetooth connection, turn off the WIRELESS switch. The Bluetooth indicator turns off.

72

nN

Using Your VAIO Computer

Using the Bluetooth Headset

The Bluetooth headset (not supplied) will come in handy during a video conference over the Internet using instant messaging
software. For details on using the Bluetooth headset, see the manual that came with your Bluetooth headset.

To connect the headset with your computer

1 Press and hold the headset power button for at least five seconds to turn on the Bluetooth headset.
2 Press and hold the volume buttons for at least five seconds until the indicator light blinks in red and green.

3 Right-click the Bluetooth icon on the taskbar and select Bluetooth Settings from the menu.

The Bluetooth Settings window appears and Add New Connection Wizard automatically starts.
4 If the Add New Connection Wizard window does not appear, click New Connection.

The Add New Connection Wizard window appears.
5 Select Express Mode (Recommended) and then click Next.

The wizard searches for Bluetooth devices in range and lists available devices, if any.
6 Select the device name for your Bluetooth headset and then click Next.

The Bluetooth Manager-Bluetooth Security window appears when a connection is established.

7 Enter "0000" for Bluetooth Passkey (PIN) and then click OK.
8 Click Next.

The headset icon appears in the Bluetooth Settings window.
9 Right-click the icon and select Connect from the menu.

To disconnect the headset from your computer

1 Right-click the Bluetooth icon on the taskbar and select Bluetooth Settings from the menu.

The Bluetooth Settings window appears.

2 Right-click the headset icon and select Disconnect from the menu.
3 Click Yes.

73

nN

Using Your VAIO Computer

Using Peripheral Devices

You can add functionality to your VAIO computer by using the various ports on the computer.

❑ Connecting a Docking Station (page 75)
❑ Connecting External Speakers (page 84)
❑ Connecting an External Display (page 85)
❑ Selecting Display Modes (page 89)
❑ Using the Multiple Monitors Function (page 92)
❑ Connecting an External Microphone (page 94)
❑ Connecting a Universal Serial Bus (USB) Device (page 95)
❑ Connecting a Printer (page 98)
❑ Connecting an i.LINK Device (page 99)
❑ Connecting to a Network (LAN) (page 101)

74

nN

Using Peripheral Devices

75

nN

Using Peripheral Devices

Connecting a Docking Station

Attaching a docking station enables you to connect additional peripherals to your computer, such as a printer and an external
display.

The docking station is not supplied with your computer and is available as an optional accessory.

Locating Ports on the Docking Station

Back

A DC IN indicator

Illuminates when the docking station is powered.

B IN USE indicator (page 80)
C UNDOCK button (page 80)
D DC IN port (page 76)
E Network (Ethernet) port (1000BASE-T / 100BASE-TX /

10BASE-T) (page 101)

F Hi-Speed USB (USB 2.0) port
G DVI-D port (page 86)
H MONITOR (VGA) port (page 86)

I Hi-Speed USB (USB 2.0) ports

* Supports high-/full-/low- speeds.

*

(page 95)

*

(page 95)

!

The docking station can be powered only through the AC adapter supplied with your computer. Do not unplug the AC adapter from the docking station

and the AC outlet while using the docking station; this may cause data damage or hardware malfunctions.

Using Peripheral Devices

Attaching Your Computer to the Docking Station

!

When your computer has no battery pack installed, do not attach the computer to the docking station.

To attach your computer to the docking station

!

Use the AC adapter supplied with your computer.

Do not move your computer while attached to the docking station; this may detach the docking station and cause damage to both units.

1 Disconnect all peripherals from the computer.
2 Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet.
3 Plug the cable attached to the AC adapter (2) into the DC IN port (3) on the docking station (4).

76

nN

4 Slide open the docking station connector cover on the bottom of the computer.

77

nN

Using Peripheral Devices

5 Align the rear bottom corners of the computer with the guides on the docking station.

78

nN

Using Peripheral Devices

6 Gently push down the computer until it clicks into place.

7 Turn on the computer.

79

nN

Using Peripheral Devices

Using Peripheral Devices

Disconnecting Your Computer from the Docking Station

!

Be sure that no devices connected to the docking station are in use before disconnecting your computer.

Do not disconnect your computer from the docking station when the IN USE indicator is lit. Disconnecting the computer while the IN USE indicator is

lit may result in loss of unsaved data or a failure of the computer.

When the battery pack is running out of power, disconnecting your computer from the docking station may result in loss of unsaved data.

Do not disconnect your computer from the docking station during video playback. Be sure to close video playback software before disconnection.

Once you have completed the steps in To disconnect your computer from the docking station (page 81), make sure to place your computer off the

docking station. Use of the computer still on the docking station may cause unstable operations.

80

nN

To disconnect your computer from the docking station

1 Press the UNDOCK button (1) and wait until the IN USE indicator (2) turns off.

✍

If the IN USE indicator is unlit, you do not have to press the UNDOCK button.

81

nN

Using Peripheral Devices

Pressing the UNDOCK button while your computer is in a power saving mode returns the computer to Normal mode first, and then initiates the

disconnection process.

!

Once you have placed your computer back in Normal mode, make sure to place your computer off the docking station. Use of the computer still on the

docking station may cause unstable operations.

2 Lift the computer away from the docking station.

3 Close the docking station connector cover on the bottom of the computer.

82

nN

Using Peripheral Devices

83

nN

Using Peripheral Devices

Alternatively, you can disconnect the computer from the docking station as follows:

1 Click Start and Undock Computer.
2 Make sure that a message balloon appears and the IN USE indicator turns off; and then lift the computer away from the

docking station.
3 Close the docking station connector cover on the bottom of the computer.

✍

It is extremely important to close the docking station connector cover after disconnecting your computer from the docking station. If the cover is left

open, dust may get inside and damage the computer.

To disconnect the docking station completely from AC power, unplug the AC adapter.

Connecting External Speakers

You can enhance the sound quality of your computer by connecting external speakers.

To connect external speakers

1 Plug the speaker cable (1) into the headphones jack (2) i.
2 Plug the other end of the speaker cable to the external speaker (3).
3 Turn down the volume of the speakers before you turn them on.

✍

Make sure your speakers are designed for computer use.

84

nN

Using Peripheral Devices

!

Do not place floppy disks on the speakers; their magnetic field may damage the data on the disks.

85

nN

Using Peripheral Devices

Connecting an External Display

You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer
display or a projector.

✍

Connect the power cord after connecting all other cables.

Connected external displays are used as secondary screens.

On the Windows operating system, you can also use an external display to set up multiple monitors.

86

nN

Using Peripheral Devices

Connecting a Computer Display

You can connect a computer display (monitor) either directly to your computer or via the optional docking station.

To connect a computer display

1 If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.
2 If you want to connect a VGA monitor, plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the

computer or on the docking station.
3 If you want to connect a TFT/DVI monitor, plug the display cable (not supplied) into the DVI-D port on the docking station.

✍

DVI-D stands for Digital Visual Interface - Digital. It is a type of DVI connector that supports only digital video signals (no analog video signals). It has

24 pins.

A DVI-I (Digital Visual Interface - Integrated) connector supports digital video and analog video signals. It has 29 pins.

!

You can use a TFT/DVI monitor only when your computer is in SPEED mode. See Selecting Performance Modes (page 104) for mode selection.

nN

Using Peripheral Devices

Connecting a Multimedia Computer Display

You can connect a multimedia computer display that includes built-in speakers and a microphone either directly to your
computer or via the optional docking station.

To connect a multimedia computer display

1 Plug the power cord of your multimedia computer display (1) into an AC outlet.
2 Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the docking station.
3 Plug the speaker cable (4) into the headphones jack (5) i on the computer.
4 Plug the microphone cable (6) into the microphone jack (7) m on the computer.

87

88

nN

Using Peripheral Devices

Connecting a Projector

You can connect a projector (for example, the Sony LCD projector) either directly to your computer or via the optional docking
station.

To connect a projector

1 Connect the power cord (1) of your projector into an AC outlet.
2 Plug an RGB signal cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the docking station.
3 Plug an audio cable (4) (not supplied) into the headphones jack (5) i on the computer.
4 Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).

89

nN

Using Peripheral Devices

Selecting Display Modes

You can select which display to be used as the primary monitor when an external display (desktop monitor, etc.) is connected
to your computer.

If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors

Function (page 92) for more information.

Using Peripheral Devices

To select a display

When using the Intel Graphics Media Accelerator (STAMINA mode)

1 Right-click on the desktop and select Personalize from the shortcut menu.
2 Click Display Settings.

The Display Settings window appears.
3 Follow the on-screen instructions to change the settings.

✍

You may not be able to display the same contents on your computer screen and the external display or projector at the same time, depending on the

type of your external display or projector.

Before turning on your computer, turn on the peripheral devices.

When using the NVIDIA video controller (SPEED mode)

1 Click Start and Control Panel.
2 Click Additional Options.
3 Click NVIDIA Control Panel.
4 Click Display.
5 Click Change Display Configuration.
6 Follow the on-screen instructions to change the settings.

90

nN

Using Peripheral Devices

✍

You may not be able to display the same contents on your computer screen and the external display or projector at the same time, depending on the

type of your external display or projector.

Before turning on your computer, turn on the peripheral devices.

For selecting a video controller, see Selecting Performance Modes (page 104).

91

nN

92

nN

Using Peripheral Devices

Using the Multiple Monitors Function

The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you
have an external display connected to the monitor (VGA) port, your computer screen and the external display can function
as a single desktop.

You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window
or a toolbar, from one display to the other.

✍

Your external display may not support the Multiple Monitors function.

Certain software applications may not be compatible with Multiple Monitors settings.

Make sure that your computer does not enter Sleep or Hibernate mode while you are using Multiple Monitors mode; otherwise the computer may not

return to Normal mode.

If you set different colors on each display, do not expand a single window across two displays; otherwise your software may not work properly.

Set fewer colors or a lower resolution for each display.

To select the Multiple Monitors mode

When using the Intel Graphics Media Accelerator (STAMINA mode)

1 Right-click on the desktop and select Personalize from the shortcut menu.
2 Click Display Settings.

The Display Settings window appears.
3 Follow the on-screen instructions to change the settings.

When using the NVIDIA video controller (SPEED mode)

1 Click Start and Control Panel.
2 Click Adjust screen resolution under Appearance and Personalization.

The Display Settings window appears.
3 Right-click the number 2 monitor and select Attached.
4 Click OK.

At the confirmation prompt, click Yes.

✍

For selecting a video controller, see Selecting Performance Modes (page 104).

93

nN

Using Peripheral Devices

You can also change one of the S button assignments to activate the Multiple Monitors mode with the corresponding S button. To change the S button

assignments, press and hold any S button to display the window for changing the assignment. For details on the S buttons, see Using Special-function

Buttons (page 32).

Additionally, you can set the display colors and resolution for each display and customize the Multiple Monitors mode.

94

nN

Using Peripheral Devices

Connecting an External Microphone

If you need to use a sound input device (for example, to chat over the Internet) you need to plug in an external microphone
(not supplied).

To connect an external microphone

Plug the microphone cable (1) into the microphone jack (2) m.

✍

Make sure your microphone is designed for computer use.

Using Peripheral Devices

Connecting a Universal Serial Bus (USB) Device

To prevent your computer and/or USB devices from damage, observe the following:

❑ When moving the computer with USB devices connected, avoid any shock or force to the USB ports.
❑ Do not put the computer into a bag or carrying case when it has USB devices connected.

Connecting a USB Mouse

To connect a USB mouse

1 Choose the USB port (1) you prefer to use.
2 Plug the USB mouse cable (2) into the USB port.

You can now use your USB mouse (not supplied) (3).

95

nN

Connecting a USB Floppy Disk Drive

You can purchase a USB floppy disk drive and connect it to your computer.

To connect a USB floppy disk drive

1 Choose the USB port (1) you prefer to use.
2 Plug the USB floppy disk drive cable (2) into the USB port.

Your USB floppy disk drive (3) is now ready for use.

!

When using a USB floppy disk drive, do not apply force on the USB port. This may cause a malfunction.

96

nN

Using Peripheral Devices

97

nN

Using Peripheral Devices

Disconnecting a USB floppy disk drive

You can disconnect a USB floppy disk drive when your computer is on or off. Disconnecting the drive when the computer is
in a power saving mode (Sleep or Hibernate) may cause the computer to malfunction.

To disconnect a USB floppy disk drive

✍

To disconnect a USB floppy disk drive when your computer is off, skip steps 1 to 8.

1 Close all programs accessing the floppy disk drive.
2 Double-click the Safely Remove Hardware icon on the taskbar.

The Safely Remove Hardware window appears.
3 Select the floppy disk drive you want to unplug.
4 Click Stop.

The Stop a Hardware device window appears.
5 Confirm that the floppy disk drive can be safely removed from the system.
6 Click OK.

A message appears stating it is now safe to remove the hardware device.

7 Click OK.
8 Click Close to close the Safely Remove Hardware window.
9 Disconnect the floppy disk drive from the computer.

Using Peripheral Devices

Connecting a Printer

You can connect a Windows-compatible printer to your computer to print documents.

Connecting a Printer Using the USB Port

You can connect a USB printer compatible with your version of Windows to the computer.

To connect a printer using the USB port

1 Plug the power cord (1) of your printer into an AC outlet.

2 Choose the USB port (3) you prefer to use.
3 Plug one end of a USB printer cable (2) (not supplied) into the USB port and the other end to your printer.

98

nN

99

nN

Using Peripheral Devices

Connecting an i.LINK Device

Notes on connecting i.LINK devices

❑ Your computer is equipped with an i.LINK port, which you can use to connect to an i.LINK device such as a digital video

camcorder.

❑ The i.LINK port on your computer does not supply power to external devices generally powered by i.LINK ports.
❑ The i.LINK port supports transfer rates up to 400 Mbps; however, the actual transfer rate depends on the transfer rate of

the external device.

❑ The optional i.LINK cables may not be available, depending on the country or area of your residency.
❑ An i.LINK connection with other compatible devices is not fully guaranteed.
❑ The i.LINK connection varies depending on the software applications, operating system, and i.LINK-compatible devices

you use. See the manual that came with your software for more information.
❑ Check the working conditions and operating system compatibility of i.LINK-compatible PC peripherals (for example, an

HDD or a CD-RW drive) before you connect them to your computer.

100

nN

Using Peripheral Devices

Connecting a Digital Video Camcorder

To connect a digital video camcorder

Plug one end of an i.LINK cable (1) (not supplied) into the i.LINK port (2) on the computer and the other end into the DV In/
Out port (3) on the digital video camcorder.

✍

On Sony digital video cameras, ports labeled DV Out, DV In/Out, or i.LINK are i.LINK-compatible.

The Sony digital video camcorder shown here is an example; your digital video camcorder may need to be connected differently.

You cannot access the pictures stored on a Memory Stick media when using an i.LINK connection.