Sony VAIO PCG-K24FP, VAIO PCG-K295HP, VAIO PCG-K74, VAIO PCG-K215B, VAIO PCG-K76P, VAIO PCG-K76SP, VAIO PCG-K74S, VAIO PCG-K20P Service Manual
Specifications and Main Features
Frequently Asked Questions
User Manual
SERVICE MANUAL
Ver. 9 2006K
Revision History
Area Model Lineup
VGN-K30
Japanese Japanese
American
European A EP/ UK
Asian/Oc eania/
South Africa
US CanadianPCG -K 20P
LatinPCG -K 24FP
International
Thai
VGN-K30B
VGN-K50B
VGN-K70B
PCG-K215B
PCG-K295HP
PCG-K74
Confidential
PCG-K76P
PCG-K74S
PCG-K76SP
1
3
2
3
3
5
5
[MA]
[MA]
[MA]
[MA]
[MA]
[MA]
[MA]
VGN-K30/K30B/K50B/K70B
PCG-K20P/K24FP
PCG-K215B/K295HP
PCG-K74/K74S/K76P/K76SP
S400
9-876-371-09
Design and specifications are subject to
change without notice.
ᧄᯏߩ᭽߅ࠃ߮ᄖⷰߪޔᡷ⦟ߩߚ๔ߥߊᄌ
ᦝߔࠆߎߣ߇ࠅ߹ߔ߇ޔߏᛚߊߛߐޕ
PERSONAL COMPUTER
Information in this document is subject to
change without notice.
Sony, VAIO and CLIE are trademarks or registered trademarks of Sony. Microsoft, Windows,
Windows Media, Outlook, Bookshelf and other
Microsoft products are trademarks or registered
trademarks of Microsoft Corporation in the
United States and other countries. The word
Bluetooth and the Bluetooth logo are trademarks
of Bluetooth SIG , Inc. AMD, the AMD logo, other
AMD product names and combinations thereof
are trademarks of Advanced Micro Devices, Inc.
Intel Inside logo, Pentium, Celeron and Core are
trademarks or registered trademarks of Intel Corporation. Transmeta, the Transmeta logo, Crusoe
Processor, the Crusoe logo and combinations
thereof are trademarks of Transmeta Corporation in the USA and other countries. Graffiti,
HotSync, PalmModem, and Palm OS are registered trademarks, and the Hotsync logo and Palm
are trademarks of Palm, Inc. or its subsidiaries.
(M) and Motrola are trademarks of Motrora, Inc.
Other Motrola products and services with (R)
mark like Dragonball are the trademarks of
Motrola, Inc.
All other names of systems, products and services
in this manual are trademarks or registered trademarks of their respective owners. In this manual,
the (TM) or (R) mark are not specified.
Caution Markings for Lithium/Ion Battery - The
following or similar texts shall be provided on
battery pack of equipment or in both the operating and the service instructions.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Discard used batteries according to the
manufacturer’s instructions.
CAUTION: The battery pack used in this device
may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100°C
(212°F) or incinerate. Dispose of used battery
promptly. Keep away from children.
CAUTION: Changing the back up battery.
• Overcharging, short circuiting, reverse charging, multilati on or incineration of the cells must
be avoided to prevent one or more of the following occurrences; release of toxic materials,
release of hydrogen and/or oxygen gas, rise in
surface temperature.
• If a cell has leaked or vented, it should be replaced immediately while avoiding to touch it
without any protection.
Service and Inspection Precautions
1. Obey precautionary markings and
instructions
Labels and stamps on the cabinet, chassis, and
components identify areas requiring special precautions. Be sure to observe these precautions,
as well as all precautions listed in the operating
manual and other associated documents.
2. Use designated parts only
The set’s components possess important safety
characteristics, such as noncombustibility and the
ability to tolerate large voltages. Be sure that replacement parts possess the same safety characteristics as the originals. Also remember that the
mark, which appears in circuit diagrams and
parts lists, denotes components that have particularly important safety functions; be extra sure to
use only the designated components.
3. Always follow the original design
when mounting parts and routing
wires
The original layout includes various safety features, such as inclusion of insulating materials
(tubes and tape) and the mounting of parts above
the printer board. In addition, internal wiring has
been routed and clamped so as to keep it away
from hot or high-voltage parts. When mounting
parts or routing wires, therefore, be sure to duplicate the original layout.
4. Inspect after completing service
After servicing, inspect to make sure that all
screws, components, and wiring have been returned to their original condition. Also check the
area around the repair location to ensure that repair work has caused no damage, and confirm
safety.
5. When replacing chip components...
Never reuse components. Also remember that the
negative side of tantalum capacitors is easily damaged by heat.
6. When handling flexible print
boards...
• The temperature of the soldering-iron tip
should be about 270°C.
• Do not apply the tip more than three times to
the same pattern.
• Handle patterns with care; never apply force.
Caution: Remember that hard disk drives
are easily damaged by vibration. Always
handle with care.
(Hight Brightness)
HDD60GB60GB40GB40GB30GB40GB
OPT- DRIV EDV D+/ -RWDV D+/-RWDV D+/- RWDVD+/- RWCD-RW/ DVD- ROMCD-RW/ DVD- ROM
MEMORY256MB x1256MB x1256MB x1256MB x 1256MB x 1256MB x 2
QUANTITY
[MAX]
1GB1GB1GB1GB1GB1GB
PCGA-AC19V7
AC adaptorPCGA-AC19V9PCGA-AC19V9PCGA-AC19V9PCGA-AC19V9PCGA-AC19V9PCGA-AC19V9
BatteryPCGA-BP2NYPCGA-BP2NYPCGA-BP2NYPCGA-BP2NYPCGA-BP2NYPCGA-BP2NY
internal W- LA N
××××○○
OSWinXP HomeWinXP HomeWinXP HomeWinXP HomeWinXP ProWinXP Pro
HDD60GB40GB60GB40GB60GB40GB
OPT- DRIV ECD-RW/DV D-ROMDV D+/- RWDVD+/-RWCD-RW/ DVD-ROMDV D+/ -RWCD- RW/DV D- ROM
MEMORY256MB x 2256MB x 2256MB x 2256MB x 1256MB x 2256MB x 1
QUANTITY
[MAX]
1GB1GB1GB1GB1GB1GB
AC adaptorPCGA-AC19V7PCGA-AC19V7PCGA-AC19V9PCGA-AC19V7PCGA-AC19V9PCGA-AC19V7
BatteryPCGA-BP2NXPCGA-BP2NXPCGA-BP2NYPCGA-BP2NYPCGA-BP2NYPCGA-BP2NY
internal W- LA N
○×○×○×
OSWin X P Pr oWi n X P Ho meW inXP Pr oWinXP Ho meWin X P Pr oW inXP Ho me
6
[COR]
2
[MA]
The trademarks of registered trademarks of above table, refer to page 2.
ᧄߩᮡ⊓㍳ᮡߦߟߡߪ㧘ࡍࠫࠍߏෳᾖߊߛߐޕ
2
[MA]
3
[MA]
3
[MA]
1-1
(END)
5
[MA]
5
[MA]
Confidential
VGN-K30/K30B/K50B/K70B (J)
PCG-K20P/K24FP (AM)
PCG-K215B/K295HP (EU)
PCG-K74/K74S/K76P/K76SP (AO)
CHAPTER 2.
BLOCK DIAGRAM
Intel
Pentium 4 75W
478 PIN mPGA
TI-PCI7420
(SN0307009GHK)
SLOT0
Memory
stick
BOARD
IFX-169
Memory
Stick
1394
Mini PCI
Wirless LAN
DC JACK
DD R V RA M
16 MB X4
CRT
LCD
AVOUT
R/G/B
LVDS SIGNAL
TV SIGNAL
Realtek
RTL8100BL
RJ45
UPD720101
USB 2.0
RA D EO N 9200
NEC
USB*3
ATI
(M9+X)
AGP bus
PCI bus
PRIMARY IDE BUS
S ECONDARY IDE BUS
HDDCDROM
System bus
400/533MHz
NORTH BRIDGE
ATI RS200MP
South Bridge
ALI 1535+
XBUS
PCU
NS PC87570
INT.K/B
PAD
DRAM SIGNAL
DDR CLOCK
LPT
BIOSTOUCH
DDR 266
SO-DIMM 1/2
EXT.MIC.
RTC
TIBQ3285LF
AC LINK2AC LINK1
MDCALC203
RJ11TPA0312
MAIN POWER BOARD
PWS-39
BATTERY
T/P SWITCH
T/P BOARD
SWX-169
2-1
(END)
POWER SWITCH
Bettery LED
Power LED
K/B LED
Power SW BOARD
SWX-168
EXT.SPKR.
INT.SPKR.
Confidential
VGN-K30/K30B/K50B/K70B (J)
PCG-K20P/K24FP (AM)
PCG-K215B/K295HP (EU)
PCG-K74/K74S/K76P/K76SP (AO)
CHAPTER 3.
FRAME HARNESS DIAGRAM
LCD unit
INVERTER UNIT
PC CARD
NETWORK
LINE IN
MIC IN
HEADPHONE
i.LINK S400
USB
USB
PC CARD
CONNECTOR
LCD
Side panel
ANTENNA
CON34
CON132
CON6
CON38
CON37
CON31
CON33
CON32
CON2
USB
WIRELESS
LAN CARD
DC
FAN
M
CON14
41
80
CON36
CON26
CON25
1
40
WIRELESS
LAN
MODEL
M
DC FAN
PCN2
CON35
CPU
CON23
PRINTER
MBX-114 BOARD
SIDE A
CON3
49 50
CON4
1
CON21
2
CON22
CON24
MONITOR
CON5
CON5
PHONE
CON16
CON17
1
OPTICAL
DRIVE
DIMM
From board to connector (direct connection)
Harness (with connectors on both ends)
Harness (soldering on either end)
DC_IN
CON20
HDD
Rear Panel
44
MODEM
CARD
JP3
1
SPEAKER
JP1
CON1
SWX-168 BOARD
TOUCH PAD
A
SIDE A
L ch
SW1
SPEAKER
R ch
Left side
IFX-169 BOARD
Front
SIDE A
CON1
MEMORY
STICK
CON2
SW1
PWS-39 BOARD
SIDE A
PCN4
PCN1
3-1
(END)
PCN3
1
8
PCN2
KEY BOARD
LITHIUM
BATTERY
PACK
SW1
JP1
JP2
SW2
SWX-169 BOARD
SIDE A
Confidential
VGN-K30/K30B/K50B/K70B (J)
PCG-K20P/K24FP (AM)
PCG-K215B/K295HP (EU)
PCG-K74/K74S/K76P/K76SP (AO)
CHAPTER 4.
EXPLODED VIEWS AND PARTS LIST
The parts list is compiled by blocks of a palmrest and bottom etc.
The sections of the parts list are different depending on the model.
Please refer to list of contents shown in the below.
Items marked "*" are not stocked since they are seldom required for
routine service. Some delay should be anticipated when ordering
these items.
The mechanical parts with no reference number in the exploded
views are not supplied.
When two or more parts are shown, use the part described first as the
main part.
The parts marked " $ " are the High Value Modules (HVM).
The parts marked " # " are the parts on which barcode label is attached.
For the barcode label, refer to CHAPTER 5.
The parts marked "&" are the "Customer Replacable Parts (CRP)"
that can be replaced by Field Customer Support.
Especially the parts with the <&> mark require the special attention to
use them. Here fore, check first whether the desired part is one of the
targetted parts of the Customer Replaceable Parts (CRP), or the nontargetted parts by referring to the exploded view.
The components identified by mark or
dotted line with mark are critical for safety.
Replace only with part number specified.
121-829-140-11FFC (TO T/P)
131-796-319-51PAD, TOUCH
142-109-665-01TAPE TOUCH PAD
B14-216-272-01SCREW (M2), +
B24-641-726-12SCREW (M2), SPECIAL HEAD
B44-641-726-41SCREW (M2), SPECIAL HEAD
B54-665-205-01SPECIAL FLAT HEAD (EG GRIP), M2
1
[MA]
5
[MA]
2
[MA]
2
[MA]
2
[MA]
2
[MA]
3
[MA]
This parts list contains two different types of parts.
The first type is the parts that are common to all models.
The other type is the parts that are different depending on each model.
ߎߩㇱຠߪ㧘ᯏ⒳ㅢߩㇱຠߣ㧘ᯏ⒳ߦࠃߞߡಽߌ߇ᔅⷐߥㇱຠߦಽ߆ࠇߡ߹ߔޕ
1
2
[MA]
[MA] 2 [MA]
[MA] 3 [MA] 3 [MA]
3
P-1
5
[MA] 5 [MA]
4-3
Confidential
VGN-K30/K30B/K50B/K70B (J)
PCG-K20P/K24FP (AM)
PCG-K215B/K295HP (EU)
PCG-K74/K74S/K76P/K76SP (AO)
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.