Sony Trinitron KV-29FX20 User Manual
SONY©
Checking the
Connecting the Aerial
S®
Thank you for purchasing this Sony product.
After following this step by step guide you
will be able to:
Insert Batteries into the Remote Control.
Connect the Aerial to your TV.
KV-29FX20
Accessories Supplied
1
2
3
4
5
6
7
8
9
0
MENU
K
1
3
Select the language of the menu screens.
Tune your TV.
Change the Programme order of the TV
channels.
View TV Programmes.
Batteries
PROGR
RM
887
S
Remote Control
Inserting Batteries into
the Remote Control
Connect a conventional aerial to the socket marked on the rear of the TV.
Switching on the TV
4
Connect the TV plug
to the mains socket
(220-240V AC, 50Hz).
Quick Start Guide
Flat Display
4-204-833-01 (1)
Ecological Paper - Totally Chlorine Free
2
Push in the On/Off
switch on the front
of the TV.
Selecting the language
S
RM
887
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
K
Automatically Tuning the TV
Changing the Programme
of the menu screens
This TV set works with menu screens. By following the instructions below, you can select the desired language of the menu screens.
5
LANGUAGE
ENGLISH
DEUTSCH
FRANÇAIS
1
2
4
5
7
8
0
S
K
PROGR
RM
3
6
9
MENU
887
Select language:
LANGUAGE
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SUOMI
SVENSKA
NORSK
DANSK
Select language:
Do you want to start
automatic tuning?
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SUOMI
SVENSKA
NORSK
DANSK
YES
NO
The first time that you switch on
your TV, the Language menu appears
automatically.
Press the or button on the
remote control to select the language,
then press the OK button on the
remote control to confirm your
selection.
The Automatic Tuning menu appears on
the TV screen in the selected language.
You need to tune the TV to receive channels (TV Broadcast).
By following the instructions below, this TV automatically
searches and stores all available channels for you.
Do you want to start
1
2
4
5
7
8
0
S
K
PROGR
MENU
RM
887
3
6
9
automatic tuning?
YES
NO
Please confirm that
antenna is connected
CONFIRM
AUTO PROGRAMME
PROGRAMME:
SYSTEM:
CHANNEL:
Searching...
PROGRAMME SORTING
PROGRAMME:
CONFIRM
Select Channel:
Select new position:
Confirm:
Exit:
PROGR
MENU
01
Press the OK button on the remote
control to select YES.
Confirm that the antenna is connected
and then press the OK button on the
remote control.
The automatic tuning starts and the
message "Searching..." flashes on the
01
I
screen.
C 21
This procedure could take some
minutes.
Do not press any button while the
automatic tuning is in process.
03
When the automatic tuning is finished, the
Programme Sorting menu appears on the
screen.
6
Order of the TV channels
By following the instructions below, you can rearrange
the order in which the channels appear on the screen.
a) If you do not wish to change the channel order:
PROGRAMME SORTING
PROGRAMME:
CONFIRM
Select Channel:
Select new position:
Confirm:
Exit:
PROGR
MENU
03
01
b) If you wish to change the channel order:
PROGRAMME SORTING
PROGRAMME:
CONFIRM
Select Channel:
Select new position:
Confirm:
Exit:
PROGRAMME SORTING
PROGRAMME:
CONFIRM
Select Channel:
Select new position:
Confirm:
Exit:
PROGR
MENU
PROGR
MENU
03
01
03
02
Press the MENU button on the
·
remote control to exit and
return to the normal TV screen.
Your TV is now ready for use.
Press the PROGR or button
·
until the channel (TV Broadcast)
you wish to rearrange appears on
the screen.
Press the or button on the
·
remote control to select the new
programme number position for
your selected channel (TV
Broadcast), then press the OK
button.
7
PROGRAMME SORTING
PROGRAMME:
CONFIRM
Select Channel:
Select new position:
Confirm:
Exit:
PROGR
MENU
04
02
·
The word CONFIRM is
highlighted for a few seconds
to confirm that the new
programme position is stored.
Repeat all the above steps if you
wish to change the order of the
other channels on your TV.
Press the MENU button on the
·
remote control to exit and
return to the normal TV screen.
Your TV is now ready for use.
Your television stations are now stored in your television’s memory.
Loading...