
3-862-886-11 (1)
Trinitr on Color TV
Operating Instructions
KV -2193MF1
KV -2193MF1A
1998 by Sony Corporation

Getting Started
Connections
Connecting a VHF antenna or a combination VHF/UHF antenna
— 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable. Plug the connector into the (antenna) socket at the rear
of the TV.
Rear of TV
Rear of TV
On a wall
or
Connecting an indoor antenna
p KV-2193MF1 only
2
Note
• You are advised to use an outdoor antenna for better reception.
1
Connecting the 3D WOOFER
p KV-2193MF1A only
1 Attach the 3D WOOFER into the foothold on the top of the TV.
2 Connect the wires to the 3D WOOFER (8Ω) terminals at the rear of the TV.
The red wire should be connected to the ‘ red terminal and the black wire to the ’ black terminal.
1
3D WOOFER
2
Black wire
3
Red wire
Notes
• Connect only the supplied 3D WOOFER; otherwise the TV may malfunction.
• Unplug the TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make sure that none of the 3D WOOFER wire strands stick out,
making contact with the neighbouring speaker terminal.
Getting Started
4

Connecting optional equipment
You can connect optional audio/video equipment to your TV such as a VCR, multi disc player, camcorder, video
game or stereo system.
Connecting video equipment using video input jacks
to antenna socket
Rear of TV
to antenna
output
VCR
to video
and audio
outputs
MONITOR
VIDEO IN
VIDEO
IN
OUT
R
AUDIO
VIDEO
(
)
MONO
L
: Signal flow
Front of TV
Camcorder
VIDEO INPUT
VIDEO
L (MONO
AUDIO
)
R
to video and
audio outputs
: Signal flow
When using the video input jacks
Do not connect video equipment to the video input jacks at the front and the rear of your TV simultaneously; otherwise the picture will
not be displayed properly on the screen.
Connecting audio/video equipment using MONITOR OUT jacks
to antenna socket
Rear of TV
Audio system
AUDIO
VIDEO
(
)
MONO
R
L
VIDEO
IN
MONITOR
OUT
MONITOR OUT
When recording through the MONITOR OUT jacks
If you change the channel or video input while recording with a VCR, the channel or video input you are recording also will be changed.
to antenna
output
VCR
to video
and audio
inputs
: Signal flow
or
Getting Started
5