Removing/Reinstalling the Battery Pack
To remove the battery pack
Remove the battery pack from the battery compartment of your VAIO computer.
You will lose all unsaved data if you remove the battery pack while your VAIO computer is on or
in Sleep mode and not connected to the AC adapter.
Be sure to turn off the computer before removing the battery pack.
1 Turn off your VAIO computer, disconnect the power cord and all connection
cables, and close the LCD screen lid.
2 Slide the battery LOCK switch (
3 Slide and hold the battery RELEASE latch (
the tab () on the battery pack, and lift the battery pack in the direction of the
arrow.
) to the unlock position.
), put your fingertip underneath
4 Slide the battery pack away from your VAIO computer.
Continued on the back side.
© 2013 Sony Corporation / Printed in China4-466-825-11 (1)
To reinstall the battery pack
Install the battery pack into the battery compartment of your VAIO computer.
1 Turn off your VAIO computer, disconnect the power cord and all connection
cables, and close the LCD screen lid.
2 Slide the battery LOCK switch to the unlock position.
3 Slide the battery pack diagonally into the battery compartment until the
projection () on each side of the battery compartment fits into the groove ()
on each side of the battery pack.
4 Turn the battery pack in the direction of the arrow and push the battery pack
down into the compartment until it clicks into place.
5 Slide the battery LOCK switch to the LOCK position to secure the battery pack on
your VAIO computer.
Your VAIO computer is designed to operate only with genuine Sony battery packs.
Make sure the battery LOCK switch is in the LOCK position before using your VAIO computer.
Using the computer without locking the battery pack securely may cause the following: the
battery pack comes away or the computer does not turn on or suddenly shuts down.