SS-GNX600/GNX660
/WG600/WGV660
SERVICE MANUAL
Ver. 1.0 2006. 04
• SS-GNX600 is front speaker system in
MHC-GNX600.
• SS-GNX660 is front speaker system in
MHC-GNX660.
• SS-WG600 is the sub woofer section in
MHC-GNX600.
• SS-WGV660 is the sub woofer section
in MHC-GNX660.
Photo: SS-GNX600 Photo: SS-WG600
SPECIFICATIONS
Front speakers
SS-GNX660 (MHC-GNX660)/
SS-GNX600 (MHC-GNX600)
Speaker system 2-way, 2-unit,
Speaker units
Woofer: 20 cm, cone type
Tweeter: 2.5 cm, horn type
Nominal impedance 6 ohms
Dimensions (w/h/d) (Approx.) 281 × 417 × 310.5 mm
Mass (Approx.) 7.0 kg net per speaker
E Model
SS-GNX600/GNX660/WG600/WGV660
Australian Model
SS-GNX600/WG600
bass-reflex type
9-887-200-01
2006D02-1
© 2006.04
Sub woofer
SS-WGV660 (MHC-GNX660)/
SS-WG600 (MHC-GNX600)
Sub woofer system 1-way, 1-unit,
bass-reflex type
Speaker units
Sub woofer: 20 cm, cone type
Nominal impedance 4 ohms
Dimensions (w/h/d) (Approx.) 320 × 420 × 345 mm
Mass (Approx.) 8.0 kg
Design and specifications are subject to change without notice.
• JIG
When disassembling the set, use the following jig (for
speaker removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
FRONT SPEAKERS/SUB WOOFER
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
SS-GNX600/GNX660/WG600/WGV660
EXPLODED VIEWS
NOTE:
• -XX, -X mean standardized parts, so they may
have some difference from the original one.
• Items marked “ * ”are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
SS-GNX600/GNX660
• The mechanical parts with no reference number in
the exploded views are not supplied.
not supplied
2
3
4
5
1
4
Ref. No. Part No. Description Remarks
1 A-1168-356-A FRONT PANEL ASSY
2 1-826-110-11 LOUDSPEAKER (2.5cm)
3 4-874-614-71 SCREW +BV (3.5X12), TAPPING
2
Ref. No. Part No. Description Remarks
4 4-874-614-02 SCREW (1) (3.5X14), TAPPING
5 1-826-109-21 LOUDSPEAKER (20cm)