SONY SPP-SS965 Service Manual

SPP-SS965

SERVICE MANUAL

SPECIFICATIONS

General

Spread method

Direct-Sequence Spread-Spectrum

Access method

FDMA-TDD

Operation frequency

902-928 MHz (100 mW)

Operating channel

20 channels

Dial signal

Tone, 10 PPS (pulse) selectable

Supplied accessories

AC power adaptor (AC-T46)
Telephone line cords (2)
Wall bracket/stand for base phone
Rechargeable battery pack (BP-T24)
Directories

Handset

Power source

Rechargeable battery pack BP-T24

Battery life

Standby: Approx. 10 days (RING ON mode)

Approx. A month (RING OFF mode)

Talk: Approx. 6 hours

Dimensions

Approx. 58 x 177 x 46 mm (w / h / d),
antenna excluded
(approx. 2 3/8 x 7 x 1 13/16 inches)
Antenna: Approx. 72 mm
(approx. 2 7/8 inches)

Mass

Approx. 250 g
(approx. 8.8 oz), battery included

US Model

Canadian Model

Base phone

Power source

DC 9V from AC power adaptor
AC-T46

Battery charging time

Approx. 12 hours

Dimensions

Approx. 170 x 60 x 214 mm (w / h / d),
antenna excluded
(approx. 6 3/4 x 2 3/8 x 8 1/2 inches)
Antenna: Approx. 165 mm
(approx. 6 1/2 inches)

Mass

Approx. 580 g
(approx. 1 lb 4 oz), wall bracket excluded

Design and specifications are subject to
change without notice.

MICROFILM

CORDLESS TELEPHONE

SPP-SS965

7-7. SCHEMATIC DIAGRAM – BASE MAIN Section (1/3) – • See page 34 for Waveform. • See page 54 for IC Block Diagrams.

(Page

48)

(Page 46)

(Page 41)

– 39 –

(Page 43)

(Page 43)

– 40 –

7-8. SCHEMATIC DIAGRAM – BASE MAIN Section (2/3) – • See page 34 for Waveform. • See page 53 for IC Block Diagrams.

SPP-SS965

(Page

40)

(Page 43)

– 41 –

– 42 –