Sony Xperia Ace II, SO-41B User guide

Download

Page 1

INSTRUCTION MANUAL

Page 2

Introduction

Thank you for your purchase of "SO-41B".

For proper use of the SO-41B, read this manual carefully before and while you use the SO-41B.

About manuals

●"クイックスタートガイド

(Supplied accessories)

Part names and functions are explained.

●

"Instruction Manual" application (Application of the terminal) (in Japanese only)

Operations and settings of each function are explained. You can search by free word, open a setting screen or launch an application from a displayed page, etc. Use the terminal more conveniently with this application.

[How to use] From the Home screen,

･

When using for the first time, download and install the application according to the onscreen instructions.

･

You can also call up "Instruction Manual" application from "my daiz".

"Wi-Fi" no tsukaikata

･

If you uninstall "Instruction Manual" application, access Google Play from Play Store for installing it again. From the Home screen, tap [Play Store],

取扱説明書

search " application to select, then operate it following the onscreen instructions.

(Quick Start Guide)"

[Instruction Manual].

"Wi-Fi" wo

setsumeisho apuri

de shirabemasu.

(Instruction Manual)"

●

"Instruction Manual" (PDF file)

Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website.

❖

Note

･

Important information for SO-41B is posted in the following website. Be sure to check before using. https://xperia.sony.jp/support/ (in Japanese only)

Operation descriptions

In this manual, key icons (P.52) are described as ,

, . And operations for selecting icons or items in the key operations on the screens are described as follows.

Description Operation

Press and hold the power key for at least 1 second.

From the Home screen,

From the Home screen, [Settings] [Display].

Touch and hold an icon.

❖

Information

･

Please note that "SO -41B" is call ed as "the termina l" in this manual.

･

In this manual, the description is written based on the default state.

Press and hold the power key on the side of the terminal for at least 1 second.

From the Home screen, tap ,

and then tap on the next

screen. From the Home screen, tap ,

and then tap "Settings" on the

next screen and "Display" on the following screen.

Keep touching an icon longer (12 seconds).

Page 3

･

In this manual, the easier procedure is described for the functions and settings which have multiple operating procedures.

･

The terminal may have a software update of the operating system (OS) for the purpose of quality improvement or addition of functions. In that case, operation procedure may change. For the information about addition of functions or change of operation procedure, refer to NTT DOCOMO website And some applications that used in the previous OS version may not be available or some unintended bugs may occur.

･

Some applications or services may not be available depending on your contract. For details, refer to NTT DOCOMO website.

･

Contact to DOCOMO varies by your contract. For details on Inquiries, refer to the last page.

･

In this manual, explanations for "docomo LIVE UX" as Home application are provided (P.74). If you set the other home application, the operations may differ from the descriptions.

･

The contents of this manual and written URL are subject to change without prior notice.

･

Screens and illustrations used in this manual are just images for explanations and may be different from the actual ones of the product.

･

Reproduction or reprint of all or part of this manual without prior permission is prohibited.

Supplied accessories

･

SO-41B

･

クイックスタートガイド

(in Japanese only)

･

ご利用にあたっての注意事項

(in Japanese only)

You can check or purchase optional devices (optional) compatible with the terminal in the DOCOMO online shop. https://onlineshop.smt.docomo.ne.jp/ options/search.html (in Japanese only)

(Quick Start Guide)

(Notes on usage)

Page 4

■

Supplied accessories. . . . . . . . . . . . . . . . . 1

Precautions . . . . . . . . . . . . . . . . . . 4

About using the terminal.................................................... 4

Recommended features......................................................6

Safety Precautions (Always follow these

directions) ..................................................................................... 7

Handling precautions.........................................................17

Waterproofness/Dustproofness................................... 24

Before using the terminal . . . . 30

Part names and functions................................................30

nano UIM card......................................................................... 31

microSD card ........................................................................... 34

Charging..................................................................................... 37

FCC ID........................................................................................... 40

Turning power on/off......................................................... 41

Initial settings........................................................................... 42

Security codes for the terminal ....................................44

Basic operations . . . . . . . . . . . . 47

Basic operations.....................................................................47

Character entry.......................................................................56

Notification LED .....................................................................62

Screen display and the icons ......................................... 62

Task manager...........................................................................67

Split screen................................................................................ 68

SuguApp..................................................................................... 69

One-handed mode..............................................................72

Searching information in the terminal and

websites...................................................................................... 73

Home screen . . . . . . . . . . . . . . . . 74

Switching the home app................................................. 74

docomo LIVE UX.................................................................... 74

Xperia Home screen............................................................ 81

Simple Home screen .......................................................... 84

Application screen ............................................................... 87

Application list........................................................................ 89

Phone/Phonebook. . . . . . . . . . . 95

Making/Receiving a call .................................................... 95

Operations during a call ................................................... 99

Call history.............................................................................. 100

Call settings ........................................................................... 103

Accessibility ........................................................................... 104

Phonebook ............................................................................ 104

Mail/Web browser . . . . . . . . . .109

docomo mail ........................................................................ 109

+Message ............................................................................... 109

Gmail.......................................................................................... 115

Early Warning "Area Mail".............................................. 116

Chrome .................................................................................... 117

Camera/Photos. . . . . . . . . . . . .121

Camera ..................................................................................... 121

Photos....................................................................................... 129

Conte nts

Page 5

Apps . . . . . . . . . . . . . . . . . . . . . . 130

メニュー

(dmenu)............................................................ 130

dmarket.................................................................................... 130

Play Store................................................................................. 131

Osaifu-Keitai........................................................................... 132

Music.......................................................................................... 136

Location services................................................................ 137

Schedule.................................................................................. 139

Clock........................................................................................... 141

docomo Data Copy .......................................................... 143

Settings . . . . . . . . . . . . . . . . . . . 145

Viewing the Settings menu......................................... 145

Network & internet............................................................ 146

Device connection............................................................ 156

Appearance ........................................................................... 157

Apps & notifications ......................................................... 157

Battery....................................................................................... 162

Display....................................................................................... 163

Sound ........................................................................................ 165

Storage...................................................................................... 167

Privacy....................................................................................... 168

Location ................................................................................... 169

Security..................................................................................... 169

docomo service/cloud.................................................... 174

Accounts.................................................................................. 175

Accessibility ...........................................................................176

Digital Wellbeing & parental controls ...................177

Google ...................................................................................... 178

System....................................................................................... 178

About phone ........................................................................ 183

File management . . . . . . . . . . 184

Storage structure................................................................ 184

File operations...................................................................... 184

Data communication. . . . . . . .186

Bluetooth function............................................................ 186

External device connection. .189

Connecting to PC .............................................................. 189

International roaming . . . . . .190

Overview of International roaming

(WORLD WING).................................................................... 190

Available overseas service ............................................ 190

Before using overseas ..................................................... 191

Making/Receiving a call in the place you stay

....................................................................................................... 194

International roaming settings.................................. 196

After returning to Japan ................................................ 198

Appendix . . . . . . . . . . . . . . . . . .199

Troubleshooting................................................................. 199

Software Update ................................................................ 208

Warranty and After Sales Services ........................... 211

あんしん遠隔サポート

....................................................................................................... 214

Main specification ............................................................. 216

Certificate and compliance ......................................... 218

Specific Absorption Rate of Mobile Phone, etc.

....................................................................................................... 219

END USER LICENSE AGREEMENT.............................. 223

Export Controls and Regulations ............................. 231

Intellectual Property Right ........................................... 231

SIM unlock.............................................................................. 234

(Anshin Enkaku Support)

Index . . . . . . . . . . . . . . . . . . . . . .235

Conte nts

Page 6

Precautions

About using the terminal

･

The terminal supports LTE, W-CDMA, GSM/ GPRS and wireless LAN systems.

･

Because the terminal us es radio frequencies, it is not available inside of tunnel, underground, building or other locations where radio waves do not reach, in a place with weak radio waves, or out of LTE service area or FOMA service area. Also, it may not be available on the upper floors of high-rise apartments or buildings, even if there are no obstructions around you. Note that calls may be disconnected even when you stay without moving in areas with strong radio wave condition indicated with the 4-signal icon.

･

Because the terminal uses radio waves to communicate, it is possible that a third party may attempt to tap your calls. However, the LTE, W-CDMA, GSM/GPRS system automatically scrambles all calls through a private call feature. Therefore, even if the third party successfully intercepts your call, they will only hear noise.

･

The terminal operates on radio frequencies by converting voice into digital signals. If a caller moves into an area of poor radio wave condition, the digital signal may not be restored accurately, and the voice received in the call may differ slightly from the actual voice.

･

The terminal supports the function which allows "User" or "Guest" to use the terminal. Therefore some services or applications recognize them as the same user even after the user is switched. DOCOMO shall have no liabilities for any damage or troubles of customer or a third party resulting from using the function (P.182).

･

Note down the data saved to the terminal in a separate note on a regular basis or save to an external recording medium such as a microSD card or PC. Note that DOCOMO assumes no responsibility for any loss of saved data resulting from malfunction, repair, changing of the model or other handling of the terminal.

･

As with PCs, some user-installed applications or accessed websites may disrupt the stability of the terminal performance, or unexpectedly transmit information via the Internet causing improper use of your location information as well as personal information recorded on the terminal. Therefore, verify the supplier and operating conditions of the applications or websites before using them.

Precautions

Page 7

･

The terminal automatically performs communication for synchronizing data, checking the latest software version, and maintaining a connection with the server, and for other purposes. If you transmit a large amount of data, such as when downloading applications or watching video, a packet communication charge becomes high. Subscription to Packet Pack/packet flat-rate service is highly recommended.

･

Depending on the applications or service you use, packet communication charge may be applied even in Wi-Fi

･

If available memory in the microSD card or

communication.

the internal storage is low, running applications may not operate correctly. In that case, delete the saved data.

･

Set a password etc. for the screen lock to ensure the security of the terminal in case of loss (P.170).

･

If your terminal is lost, change your each account password to invalidate authentication using a PC to prevent other persons from using Google services such as Gmail or Google Play, or SNS, etc.

･

For using services and applications provided by the third party's including applications provided by Google LLC, confirm the terms and conditions, etc. specified by Google or the providers. DOCOMO assumes no responsibility for any malfunctions resulting from the services and applications.

･

When a license agreement screen etc. appears, follow the onscreen instructions.

･

Applications and service contents are subject to change without prior notice.

･

Providers other than sp-mode, mopera U and Business mopera Internet are not supported.

･

For details on usage charge, refer to NTT DOCOMO website.

･

Display is manufactured by taking advantage of highly advanced technology but some dots may be always or never lit. Note that, this shows characteristics of the display and not defects in the terminals.

･

DOCOMO is not liable to any failures or malfunctions for commercially available optional equipment.

Precautions

Page 8

Recommended features

Camera

You can activate the camera from the icon of the "Camera" application or the camera icon on the lock screen. You can easily shoot beautiful photos just leaving it to the camera with SUPERIOR AUTO which automatically determines the scene and condition to select most suitable setting, Panorama which can frame vast scenery to compose smooth and natural finishes, Portrait selfie which allows you to adjust

→

effects while shooting, etc.

P. 1 2 1

Multi-window

When you want to "post to SNS while seeing a video" or "search for the Internet when writing email", the Multi-window feature is very useful. The screen can be split in two windows and you can operate applications individually in each window. Multi-window can be activated from the multi-window menu or the split screen

→

feature.

For details on the feature, refer to the Xperia myxperia/ (in Japanese only)).

P.51, P.68

™

website (https://xperia.sony.jp/

Precautions

Page 9

Safety Precautions (Always follow these directions)

■

For safe and proper use of the terminal, please read the "Safety Precautions" prior to use.

■

ALWAYS observe the safety precautions since they intend to prevent personal injury or property damage.

■

The following symbols indicate the different levels of injury or damage that may result if the guidelines are not observed and the terminal is used improperly.

Failure to observe these guidelines

DANGER

WARNING

CAUTION

may "immediately result in death or serious injury

Failure to observe these guidelines may "result in death or serious

(*1)

injury

Failure to observe these guidelines may result in minor injury and property

(*3)

damage

*1 Serious injury: This refers to loss of sight, injury,

burns (high- and low-temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long-term hospital attendance as an outpatient.

*2 Minor injury: This refers to injuries, burns (high- and

low-temperature), electric shock, etc. that do not require hospital admission for treatment or longterm hospital attendance as an outpatient.

*3 Property damage: This refers to extended damage

to buildings, furniture, livestock, pets, etc.

■

The following symbols indicate specific directions.

Indicates prohibited actions.

Don’t

(*1)

(*2)

Indicates not to disassemble.

No disassembly

Indicates not to use where it could get wet.

No liquids

Indicates not to handle with wet hands.

No wet hands

Indicates compulsory actions in accordance with instructions.

Indicates to remove the power plug from the outlet.

Unplug

Precautions

Page 10

1. Handling the terminal, adapter, and nano UIM card (common)

DANGER

Do not use, store or leave the equipment in locations subject to high temperature or

Don’t

accumulation of heat (e.g. by the fire, near a heater, under a kotatsu or bedding, in direct sunlight, in a car in the hot sun).

Doing so may cause fire, burns, injury, electric shock, etc.

Do not put the equipment in or place near microwave ovens, cooking appliances such

Don’t

as IH cooking heaters, or high pressure containers such as pressure cookers.

Doing so may cause fire, burns, injury, electric shock, etc.

Do not splash sand, soil or mud, or do not directly place the equipment on them. Also,

Don’t

do not touch the equipment with hands with sand etc. adhered.

Doing so may cause fire, burns, injury, electric shock, etc. For waterproofness/dustproofness, see the following.

⇒

P.24 "Waterproofness/Dustproofness"

Do not charge the terminal when it is wet with liquids such as water (drinking water,

Don’t

sweat, seawater, urine of pet animals, etc.). Also, do not charge the terminal in a place where it possibly contacts water such as a bathroom.

Doing so may cause fire, burns, injury, electric shock, etc. For waterproofness, see the following.

⇒

P.24 "Waterproofness/Dustproofness"

Do not subject the terminal to strong pressure or break the terminal. Especially

Don’t

when the terminal is in a pocket of clothes, do not let it hit against surroundings or put between the objects.

Doing so may cause fire, burns, injury, etc. because of damage of the internal battery. * The following are examples that you should

be careful of:

・

Sitting or squatting with the terminal put in a pocket of trousers or skirt

・

Letting your outer wear get caught in doors or a door of car when the terminal in the pocket

・

Stepping on the terminal on a soft object such as a sofa, bed, or bedding, or on a floor

・

Putting the terminal in a seat gap of train, bus, etc.

Do not attempt to remove the internal battery from the terminal.

Don’t

Doing so may cause fire, burns, injury, electric shock, etc.

The back panel of the terminal cannot be removed. Do not attempt to remove it.

Don’t

Doing so may cause fire, burns, injury, etc.

Do not disassemble or modify the equipment.

No disassembly

Doing so may cause fire, burns, injury, electric shock, etc.

Do not let the equipment get wet with liquids such as water (drinking water, sweat,

No liquids

seawater, urine of pet animals, etc.).

Doing so may cause fire, burns, injury, electric shock, etc. For waterproofness, see the following.

⇒

P.24 "Waterproofness/Dustproofness"

Precautions

Page 11

Do not allow liquids such as water (drinking water, sweat, seawater, urine of pet animals,

No liquids

etc.) to get inside of the charging jack or the external connection jack.

Doing so may cause fire, burns, injury, electric shock, etc. For waterproofness, see the following.

⇒

P.24 "Waterproofness/Dustproofness"

Use optional devices specified by NTT DOCOMO.

Using a device other than specified may cause fire, burns, electric shock, etc.

WARNING

Do not subject the equipment to strong force, impacts, or vibration such as letting it

Don’t

fail, stomping or throwing it.

Doing so may cause fire, burns, injury, electric shock, etc.

Do not allow conductive materials (such as metal objects and pencil lead) to come into

Don’t

contact with the charging jack or external connection jack or dust to get inside it.

Doing so may cause fire, burns, injury, electric shock, etc.

Do not cover or wrap the equipment with a cloth or bedding in use or while charging.

Don’t

Doing so may cause fire, burns, etc.

If charging does not finish after specified time has elapsed, stop charging.

Failure to do so may cause fire, burns, injury, etc. due to overcharge etc.

Power off the terminal before you step into a place where flammable gas or dust is

generated. Stop charging if you charge the battery.

May cause explosion, fire, etc. if the flammable gas, etc. catches fire.

Follow the instructions of facility for use in a gas station, etc.

Do not charge the battery in a gas station, etc. Also, be careful not to drop the terminal when using in a gas station etc. Do not use it during oil feeding. May cause explosion, fire, etc. if the flammable gas, etc. catches fire.

If you notice anything unusual about the equipment such as an unusual odor,

abnormal noise, smoke generation, overheating, discoloration or deformation while using or charging, or during storage, take care of safety and perform the following measures.

・

Remove a power plug from a power outlet or accessory socket.

・

Power off the terminal. Failure to do so may cause fire, burns, injury, electric shock, etc. if you do not follow the instructions above.

CAUTION

Do not use damaged equipment.

Doing so may cause fire, burns, injury, etc.

Don’t

Do not place on an unstable or inclined platform. Be careful especially when vibrator

Don’t

is set.

Doing so may cause the device to fall etc. and cause injury.

Precautions

Page 12

Do not use or keep in a place that is very humid, dusty, or subject to high

Don’t

temperature.

Doing so may cause fire, burns, electric shock, etc. For waterproofness/dustproofness, see the following.

⇒

P.24 "Waterproofness/Dustproofness"

If children use the terminal, parents or guardians should give them the proper

Don’t

instructions for use and do not allow them to use the terminal in the wrong way.

Doing so may cause accidental ingestion, injury, electric shock etc.

Keep the equipment out of the reach of babies and infants.

Don’t

Especially be careful about a storage location for small parts such as the nano UIM card/microSD card tray.

Doing so may cause accidental ingestion, injury, electric shock etc.

Be careful when using the terminal continuously for a long time or while

charging because the temperature of the terminal may rise. Also, be careful not to touch it unintentionally for a long time when you put the terminal in a pocket of clothes, you fall asleep, etc.

The terminal or adapter may become warm when using applications, calling, performing data communication, watching videos, etc. for a long time or while charging. If you are directly in contact to a high temperature area for a long time, a redness of skin, itch, rash, low-temperature burn etc. may be caused depending on your physical condition.

2. Handling the terminal

DANGER

Do not throw the terminal into fire or apply heat.

Don’t

Doing so may cause fire, burns, injury, etc.

Do not apply excessive force such as sticking a sharp object (nail, etc.) to the terminal,

Don’t

hitting it with a hard object (hammer, etc.), or stepping on it.

Doing so may cause fire, burns, injury, etc.

If the internal substance of the terminal contacts your eyes or mouth, immediately

rinse your eyes or mouth with clean water and see a doctor right away.

Failure to do so may cause blindness, medical problem, etc. due to effects of the internal substance of the terminal etc.

WARNING

Do not turn on or flash the flash/photo light with the luminous part close to the other

Don’t

people's eyes. Keep enough distance away especially from babies and infants.

Doing so may cause blurred vision etc. Or it may dazzle his/her eyes or scare him/her causing an accident such as injury.

Do not turn on or flash the flash/photo light toward a driver of a car etc.

Don’t

Doing so may disturb driving and cause an accident etc.

Precautions

Page 13

Do not watch a repeatedly-blinking screen for a long time.

Don’t

Doing so may cause cramp, loss of consciousness, etc.

Do not allow water or other liquids (dr ink ing water, sweat, seawater, urine of pet animal,

Don’t

etc.), or foreign substance such as a metal parts (blade of cutter, staple, etc.) or flammables to get in the nano UIM card/ microSD card slot of the terminal. Do not insert a nano UIM card or microSD card into wrong slot, or insert it in wrong orientation.

Doing so may cause fire, burns, injury, electric shock, etc.

Do not expose the camera lens to direct sunlight for an extended period.

Don’t

Doing so may cause fire, burns, injury, etc. by the light-collecting mechanism of the lens.

Power off the terminal or put it in Airplane mode before boarding an airplane.

Use of mobile phones on board is restricted. Follow the instructions of each airline. The radio wave from the terminal may adversely affect on-board electronic equipment. Prohibited acts related to mobile phone usage on an airplane may be punished by law.

Follow the instructions of each medical facility for the use of mobile phones on their

premises.

Power off the terminal in a place where the use is prohibited. The radio wave from the terminal may affect electronic equipment and electronic medical equipment.

Always keep the terminal away from your ear when you talk with hands-free set, while

the ringtone is loudly sounding, or in standby mode. Also, when you play a game, play back a video or music, etc. connecting the earphone/microphone, etc. to the terminal, adjust the volume adequately.

Loud sound is emitted from the terminal when calling with hands-free set. Even in standby mode, ringtone or alarm sound may sound suddenly. Listening to loud sound for long hours continuously may cause a disability of ears such as deafness. Moreover, too loud sound makes you barely hear the surrounding sounds and may cause an accident.

If you have a weak heart, set the vibrator or ringtone volume carefully.

Sudden vibration or ringtone sounding when for incoming call astonishes you and it may affect your heart.

If you wear any electronic medical equipment, check with the relevant medical

electronic equipment manufacturer or vendor whether the operation may be affected by radio waves.

The radio wave from the terminal may affect the electronic medical equipment.

Precautions

Page 14

Power off the terminal when it is near electronic equipment which controls with

high precision or handles weak signals.

The radio wave from the terminal may interfere with the operation of electronic devices or equipment. * The following are some electronic devices

or equipment that you should be careful of: Hearing aids, implantable cardiac pacemaker, implantable cardioverter defibrillator, other electronic medical equipment, and other automatically controlled devices or equipment. If you use an implantable cardiac pacemaker, implantable cardioverter defibrillator, or other electronic medical equipment, check with the medical electronic equipment manufacturer or vendor whether the operation can be affected by radio waves.

Be careful about broken glasses or exposed internal part of the terminal if the display,

camera lens, etc. is broken.

Touching damaged or exposed area may cause burns, injury, electric shock, etc.

If the substance of the internal battery leaks or gives off a strange smell, immediately

remove it from the vicinity of open flames.

The leaking liquid may ignite fire, catch fire, explode etc.

Be careful not to allow a pet etc. to bite the terminal.

Doing so may cause fire, burns, injury, etc. because of damage of the internal battery.

CAUTION

When using the motion sensor, check the safety around you, hold the terminal firmly,

Don’t

and do not shake it unnecessarily.

Failure to do so may cause accident such as injuries.

If the internal substance is leaked due to damage of the display, do not allow it to

Don’t

touch your skin s uch as face, hands, or cloths etc.

Doing so may cause injury etc. on y our eyes or skin. If the internal substance gets into your eyes, mouth, etc. or contacts skin or clothes, immediately rinse the contacted area with clean water. If the substance gets into your eyes, mouth, etc. immediately see a doctor after rinsing.

Do not dispose of the terminal together with usual trash.

Don’t

Doing so may cause fire, burns, injury, etc. Also, it may cause environmental destruction. Bring the unnecessary terminal into a sales outlet such as docomo Shop. If your local municipality has a battery recycling program, dispose of them as provided for.

If the substance leaks out from the internal battery, do not make it contact with your

Don’t

skin of face or hands, clothes, etc.

Precautions

Page 15

To use the terminal in a car, check with automobile manufacturer or dealer to

determine how the device is affected by radio waves before using.

In rare cases, the radio wave from the terminal may affect the vehicle's electronic equipment in some vehicle models. In that case, stop using the terminal immediately.

If abnormalities on skin are developed by using the terminal, immediately stop using

and take medical treatment.

The use of the terminal may cause itching, rashes, eczema, or other symptoms depending on the your physical condition. For material of each part, see the following.

⇒

P. 16 "M at e r ia l li s t"

Make sure not to get metal objects (blade of cutter, staples, etc.) adhered because

magnetic parts are used on the earpiece, speaker, vibrator (lower right of the back side) of the terminal.

Such adhered objects may cause injury etc.

Keep the equipment out of the reach of children, people who needs to be

supervised, etc.

The terminal contains magnets. If he or she swallows the magnet, suffocation or serious symptom resulting from hurt of bowel etc. may be caused. When he or she swallowed the magnet, consult a doctor immediately.

Do not let it close to medical device.

The magnets used for the terminal may affect

medical devices such as a pacemaker, pressure variable shunt for hydrocephalus curing, etc. Do not let the terminal close to persons who use such medical devices. If you are a user of such medical device, consult your doctor before using the terminal.

Watch the display in an adequately bright place taking a certain distance from it.

Watching in a dark place or closely may reduce visual acuity etc.

3. Handling the adapter

WARNING

Do not use the adapter cord if it gets damaged.

Don’t

Doing so may cause fire, burns, electric shock, etc.

DC adapter is only for a negative ground vehicle. Do not use DC adapter for a positive

Don’t

ground vehicle.

Doing so may cause fire, burns, electric shock, etc.

Do not touch the adapter if you hear thunder.

Don’t

Doing so may cause electric shock etc.

Do not short-circuit the charging jack while it is connected to a power outlet or

Don’t

accessory socket. Do not touch the charging jack with your hands, fingers, or any part of your body.

Doing so may cause fire, burns, electric shock, etc.

Precautions

Page 16

Do not place heavy objects on the adapter cord, or do not apply unnecessary force such

Don’t

as pulling etc.

Doing so may cause fire, burns, electric shock, etc.

When you insert/remove a plug of AC adapter to/from power outlet, do not let it to

Don’t

contact with metal objects.

Doing so may cause fire, burns, electric shock, etc.

Do not connect the voltage converter (e.g. travel converter for overseas) to AC adapter.

Don’t

Doing so may cause ignition, overheating, electric shock etc.

Do not put an excessive force to the connection part with the adapter connected

Don’t

to the terminal.

Doing so may cause fire, burns, injury, electric shock, etc.

Do not touch the adapter cord, charging jack or power plug with wet hands.

No wet hands

Doing so may cause fire, burns, electric shock, etc.

Use the adapter only on the specified power supply and voltage.

When charging the terminal overseas, use AC adapter for global use.

Using the incorrect power supply and voltage may cause fire, burns, electric shock, etc. AC adapter : 100V AC (Make sure to connect the adapter to a household AC power outlet.) AC adapter for global use : 100V to 240V AC (Make sure to connect the adapter to a household AC power outlet.) DC adapter : 12V or 24V DC (only for a negative-ground vehicle)

When replacing a fuse in a DC adapter, make sure to use the specified fuse.

Using a fuse other than specified may cause fire, burns, electric shock, etc. For the specified fuse, check a manual that comes with a DC adapter.

Wipe dust off from the power plug.

Using it with dust adhered may cause fire,

burns, electric shock, etc.

When you connect the adapter or accessory socket to a power outlet, insert it firmly.

Insecure inserting may cause fire, burns, electric shock, etc.

When you disconnect the power plug from a power outlet or accessory socket, do not

apply excessive force such as pulling the adapter cord. Instead, hold the adapter to disconnect.

Pulling the adapter cord may damage the cord and cause fire, burns, electric shock, etc.

When plugging/unplugging an adapter into/from the terminal, plug/unplug the

adapter straight toward the jack without applying excessive force such as pulling the cord etc.

Incorrect plugging/unplugging may cause fire, burns, injury, electric shock, etc.

If the charging terminal is deformed such as being bent etc., stop using immediately. Do

not use it with the deformation restored.

Doing so may cause fire, burns, injury, etc. due to short-circuit of charging terminal.

Precautions

Page 17

Always disconnect the power plug from a power outlet or accessory socket when not

Unplug

using equipment.

Keeping with connected to the power plug may cause fire, burns, electric shock, etc.

Immediately remove the power plug from a power outlet or accessory socket if liquid

Unplug

such as water (drinking water, sweat, seawater, urine of pet animals, etc.) is adhered.

Failure to do so may cause fire, burns, injury, etc. due to short-circuit from the adhered substance.

Before cleaning, remove the power plug from a power outlet or accessory socket.

Unplug

Failure to do so may cause fire, burns, electric shock, etc.

CAUTION

Do not touch the adapter successively when it is connected to a power outlet or

Don’t

accessory socket.

Doing so may cause a burn etc.

4. Handling the nano UIM card

CAUTION

Be careful of the cut surface not to hurt your body parts such as fingers when handling a

nano UIM card.

The cut surface may be sharp and it may cause injury etc.

5. Handling the terminal near electronic medical equipment

WARNING

If you use an implantable cardiac pacemaker or implantable cardioverter defibrillator,

keep the terminal 15 cm or more away from the implant at all times.

The radio wave from the terminal may affect the performance of electronic medical equipment.

If you need to use electronic medical equipment other than implantable cardiac

pacemaker or implantable cardioverter defibrillator outside medical facilities when treating at home etc., check with the relevant medical electronic equipment manufacturer whether the operation may be affected by radio waves.

The radio waves from the terminal may affect the performance of electronic medical equipment.

Precautions

Page 18

When you get close to other people within 15 cm just like not having enough space to

turn around, set the radio wave of the terminal to OFF beforehand ( Airplane mode, to Power off, etc.).

A person in close proximity may put on implanted a medical electrical equipment such as pacemakers and ICDs. The radio waves from the terminal may affect the performance of electronic medical equipment.

Follow the instructions of each medical facility for the use of the terminal on their

premises.

The radio waves from the terminal may affect the performance of electronic medical equipment.

6. Material list

■

The terminal

Part Material

Exterior case (top part, bottom part, side part, cover of nano UIM card/ microSD card slot)

External case (Volume key/Zoom key, Google Assistant Key, back panel)

Transparent plate (Display)

Transparent plate (Camera lens)

Power key/Fingerprint sensor

Earpiece (upper part) mesh

Speaker (lower part) mesh

Rubber gasket of the cover of nano UIM card/ microSD card slot

Tray of nano UIM card/ microSD card

Surface

Polyc arbona te resin (with glass fiber)

Polyc arbona te resin

Hardened glass AFP

Epoxy resin Coating

SUS sheet metal

PET

Silicon rubber

Polyc arbona te resin (with glass fiber) + SUS sheet metal

treatment

Coating

treatment

treatment + AR treatment

PVD treatment

―

PVD treatment

Precautions

Page 19

Handling precautions

■

Common precautions

･

SO-41B is waterproof/dustproof; however, do not allow liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.) or foreign objects such as dust to enter inside of the terminal or adhere to optional devices.

The adapter and the nano UIM are not waterproof/dustproof. Do not use in highly humid places such as a bathroom or where it is exposed to rain etc. Or putting them on your body, humidity of sweat may cause internal corrosion and malfunction. Malfunctions which are determined to be caused by water as result of inspections are not covered by the warranty. For repairs, see "Warranty and After Sales Services" (P.211).

･

Waterproofness/dustproofness may not be maintained if the terminal has defect in appearance such as damage or deformation. In that case, see "Warranty and After Sales Services" (P.211) and then inquire about it.

･

Clean the terminal with a dry soft cloth (such as used for cleaning eyeglasses).

- Rubbing roughly may scratch the display.

- Drops of water or dirt left on the display may cause stains.

- Do not use alcohol, thinner, benzine, cleaning detergent, etc. to clean the terminal. These chemicals may erase the printing on the terminal or cause discoloration.

･

Clean the jacks or the fingerprint sensor occasionally and use the terminal in a clean state.

If the jack etc. is dirt, you may not use the terminal normally. When cleaning, be careful not to damage the jack etc.

･

Do not leave the terminal near the air conditioning vent.

Extreme temperature changes may produce condensation and corrode the internal parts of the terminal, causing the terminal to malfunction.

･

Make sure to use the terminal without excessive force.

Putting the terminal in a bag full of items or sitting down with the terminal in a pocket of clothes may cause malfunction or damage of the display, internal circuit board, internal battery, etc. Also, doing so while the external device is connected to the external connection jack may cause malfunction or damage.

･

Use the optional devices specified by NTT DOCOMO.

Using a non-specified device may cause malfunction or damage.

･

Read the user's manual supplied with each optional device.

Precautions

Page 20

･

Do not drop the terminal or give a strong impact to the terminal.

Doing so may cause a malfunction or damage.

■

The terminal precautions

･

Do not press the display strongly, or not operate with a sharp-pointed objects.

The display may get scratched and it may cause a malfunction or damage.

･

Do not use the terminal in extremely hot or cold places.

Use the terminal where the temperature ranges

℃

between 5 use in a bathroom etc. when temperature is

above 36℃) and humidity ranges between 45% and 85%.

･

Using the terminal near a household

and 40℃ (limited to the temporary

electric appliance (a TV, radio, etc.) may cause interference in such electric appliance.

･

Back up data that you saved to the terminal to a microSD card, a PC, or cloud, etc., or note down in a separate note and keep it safely.

NTT DOCOMO is not liable for any loss of data saved in the terminal.

･

Do not insert the plug of external device to the external connection jack at a slant when connecting. Or, do not pull the plug when they are connected.

Doing so may cause a malfunction or damage.

･

It is not abnormal if the terminal becomes warm while in use or charging. You can continue using the terminal.

･

Do not expose the camera lens under direct sunlight.

If you do so, some of the elements may melt or become faded.

･

Always keep the cover of nano UIM card/microSD card slot closed during use.

Failure to do so may allow liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.) or foreign objects such as dust to enter inside and cause a malfunction.

･

Do not subject the fingerprint sensor to strong impact or scratch it.

Doing so not only may cause a malfunction of the fingerprint sensor, but authentication may become unavailable.

･

While microSD card is being used, do not take the card out and do not turn off the terminal.

Doing so may cause data loss or malfunction.

･

Keep off a magnetic card or a magnetic object from the terminal.

The data in cash cards, credit cards, etc. may be erased. Also, strong magnetic objects may cause a malfunction of the terminal.

Precautions

Page 21

･

Do not decorate the terminal with a film or stickers.

The functions which use the proximity sensor may not work properly. For a location of proximity, see the following.

⇒

P.30 "Part names and functions"

･

The internal battery is out of the warranty due to a consumable part.

The internal battery may become swelled toward the end of battery life depending on usage condition of the internal battery. Replace the internal battery if the usable time is extremely shortened even in a full charge or when the internal battery is swollen. For replacement of the internal battery, DOCOMO keeps the terminal and accept for a fee. See "Warranty and After Sales Services" (P.211) because we accept as a repair request.

･

Charge the battery in an environment with the proper ambient temperature

℃

to 35℃).

･

The operating time of the internal battery varies depending on the operating environment and the degradation level of the internal battery.

･

To store the terminal, avoid the following conditions so as not to degrade the performance or the battery life of the internal battery.

- The battery is fully charged (immediately after the charging is complete)

- The battery has run out (the terminal cannot power on)

An appropriate battery level for storing is about 40%.

･

Type of internal battery for the terminal is as follows.

Display Type of Battery

Li-ion 00 Lithium Ion Battery

Precautions

Page 22

■

Precautions for the adapter

･

Charge the battery in an environment with the proper ambient temperature

℃

to 35℃).

･

Do not charge in the following places.

- Places that are very humid, dusty or exposed to strong vibrations

- Near household electric appliance (a TV, radio, etc.)

･

The adapter may become hot during charging. This condition is not abnormal. You can continue using the terminal.

･

When using the DC adapter for charging, do not turn off the vehicle engine.

Doing so may cause the exhaustion of vehicle battery.

･

When you use a power outlet with a mechanism to prevent the plug from being removed, follow the instructions on the outlet's user's manual.

･

Do not subject the equipment to a strong impact. Do not deform the charging jack.

Doing so may cause malfunction.

■

nano UIM card precautions

･

Do not apply unnecessary force to insert/remove the nano UIM card.

･

Note that DOCOMO assumes no responsibility for any malfunctions resulting from inserting the nano UIM card into another IC card reader/writer and using it.

･

Clean the IC part occasionally and use it in a clean state.

If the IC is dirt, it may not be used properly.

･

Clean the terminal with a dry soft cloth (such as used for cleaning eyeglasses).

･

Back up data that you saved to the nano UIM card to a microSD card, a PC, cloud, etc., or note down in a separate note and keep it safely.

NTT DOCOMO is not liable for any loss of data saved in the terminal.

･

Take an unnecessary nano UIM card to a sales outlet such as docomo Shop for proper disposal in order to protect the environment.

･

Do not carelessly damage, contact, or short-circuit an IC.

Doing so may cause data loss or malfunction.

･

Do not drop a nano UIM card or subject it to impact.

Doing so may cause malfunction.

･

Do not bend a nano UIM card or place a heavy object on it.

Doing so may cause malfunction.

Precautions

Page 23

･

Do not insert a nano UIM card into the terminal if a label or seal is attached to the card.

Doing so may cause malfunction.

■

Bluetooth® function precautions

･

To secure the Bluetooth communication, the terminal supports the security function compliant with Bluetooth standards, but the security may not be sufficient depending on the settings, etc. Be aware of security risks when using Bluetooth.

･

Please be aware that DOCOMO is not responsible for any data leakage that might occur when communicating data via Bluetooth.

･

Frequency band

The frequency band used by the terminal's Bluetooth/wireless LAN function is written as follows:

2.4 : This radio equipment uses the 2400 MHz band.

Modulation scheme is the

m or less.

：

FH-SS, other system, DS-SS, or OFDM system.

FH/XX/DS/OF

4 : The estimated interference distance is 40

8 : The estimated interference distance is 80

: The full band between 2400 MHz

and 2483.5 MHz is used and the band of the mobile identification device can be avoided.

Available channels vary depending on country/ region. For use in an aircraft, contact the airline beforehand.

･

Bluetooth cautions

The operating frequency band of the terminal is used by industrial, scientific, consumer and medical equipment including microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (hereinafter referred to as "another station").

- Before using this equipment, confirm that "another station" is not being operated nearby.

- In the event of the terminal causing harmful radio wave interference with "another station", promptly change the operating frequency or stop radio wave emission by turning off the power, etc.

- If you have any questions, inquire of the contact on the last page.

Precautions

Page 24

■

Wireless LAN (WLAN) precautions

･

Wireless LAN (WLAN) exchanges information using radio waves, and allows you to freely establish LAN connection if you are within an area where radio waves reach. However, without appropriate security settings, communications may be intercepted or hacked by malicious parties. It is recommended to configure necessary security settings on your own judgment and responsibility.

･

Please be aware that DOCOMO is not responsible for any data leakage that might occur when communicating data via wireless LAN function.

･

Wireless LAN

Do not use wireless LAN near magnetic devices such as electrical appliances or AV/OA devices, or in radio waves.

- Magnetism or radio waves may increase noises or disable communications (especially when using a microwave oven).

- When used near TV, radio, etc., reception interference may occur, or channels on the TV screen may be disturbed.

- If there are multiple wireless LAN access points nearby and the same channel is used, search may not work correctly.

･

2.4GHz device cautions

The operating frequency band of the WLAN device is used by industrial, scientific, consumer and medical equipment including home electric appliances such as microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (radio stations requiring a license).

- Before using the device, confirm that premises radio stations for identifying mobile units, specified low power radio stations and amateur radio stations are not being operated nearby.

- If the device causes harmful radio interference to premises radio stations for identifying mobile units, immediately change the frequency band or stop use, and inquire of the contact on the last page for crosstalk avoidance, etc. (e.g. partition setup).

- If the device causes radio interference to specified low power radio stations or amateur radio stations, inquire of the contact on the last page.

Precautions

Page 25

･

5GHz device cautions

The terminal can use 3 frequency bands of

5.2GHz band (W52), 5.3GHz band (W53), 5.6 GHz band (W56).

- 5.2GHz band (W52/36, 40, 44, 48 ch)

- 5.3GHz band (W53/52, 56, 60, 64 ch)

- 5.6GHz band (W56/100, 104, 108, 112 , 116, 120, 124, 128, 132, 136, 140, 144 ch)

Use of 5.2/5.3 GHz band wireless LAN outdoors is prohibited by the law (except when communicating with an access point of high power data communication system for 5.2 GHz band/relay station).

■

FeliCa® and NFC reader/writer function precautions

･

FeliCa and NFC reader/writer function of the terminal use weak waves requiring no licenses for radio stations.

･

They use 13.56 MHz frequency band. When the other FeliCa or NFC reader/ writer is used in the surroundings, keep the terminal away sufficiently from them. Before using, confirm that there are no radio stations using the same frequency band nearby.

･

For use in an aircraft, contact the airline beforehand. Some countries/regions may restrict the use of the function. Check the regulations of the country/ region before using it.

■

Note

･

Do not use a remodeled terminal. Using a remodeled terminal violates the Radio Law/Telecommunications Business Act.

The terminal is compliant with rules on the technical standard conformance of specified wireless equipment based on the Radio Law/ Telecommunications Business Act, and as a proof of it, the "Technical Compliance Mark " is depicted on the electronic nameplate of the terminal. To check the electronic name plate, from the Home screen,

[Certificates].

phone] If you remove the screws and alter the inside of the terminal, the technical regulations conformity certification becomes invalid. Do not use the terminal with the certification invalid, as it is a violation of the Radio Law and Telecommunications Business Act.

･

Be careful when using the terminal

[Settings]u[About

while driving.

Unless required by laws and regulations, gazing at the screen of the terminal or holding the terminal in your hand for calling while driving is subject to penalties.

･

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Precautions

Page 26

･

The FeliCa and the NFC reader/writer functions are compliant with the wireless standards of Japan. Check the regulations of the country/ region beforehand if you try to use the function overseas.

･

Do not alter the basic software illegally.

It is regarded as the software modification and Repairs may be refused.

Waterproofness/ Dustproofness

SO-41B provides waterproofness property of

, IPX8*2, and dustproofness property of

IPX5

with the cover of nano UIM card/

IP6X microSD card slot firmly attached.

*1 IPX5 means that a communication device

keeps functioning after applying a jet flow of

12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in 6.3 mm inner diameter.

*2 IPX8 means that a communication device

keeps functioning after it is slowly submerged to depth of 1.5 m in static tap water at room temperature, left there for approximately 30 minutes and then taken out.

*3 IP6X indicates a protection degree that a

mobile phone has the ability to prevent dust from entering inside even when it has been shaken for 8 hours in an apparatus

containing dust particles 75 diameter.

m or less in

Precautions

Page 27

What you can do with waterproofness/dustproofness of SO-41B

･

You can talk without an umbrella in the rain (for rainfall of 20 mm or less per hour).

- Do not open or close the cover of nano UIM card/microSD card slot with wet hands or with water droplets on the terminal.

･

You can wash the terminal when it gets dirt or stained with liquid other than tap water.

- Wash the terminal with tap water at normal

℃

temperature (5 flow (less than 6 L/min.) at distance of approximately 10 cm away from the tap or shower.

- When washing the terminal, hold the cover of nano UIM card/microSD card slot closed, and wash the terminal with your hands, not using a brush or sponge. After washing, drain the terminal before use (P.28).

･

You can use at a poolside. Do not throw water from the pool on the terminal, or soak it in pool water.

･

You can use the terminal in a bathroom.

- Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. Doing so may cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (P.28).

-35℃) by weaker water

- Nev er put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in the procedure above.

- You can use the terminal within 2 hours in a bathroom where the temperature ranges

℃

between 5 and 45

and humidity ranges

between 45 and 99%.

- Sudden change in temperature may cause condensation. In case of bringing the terminal from a cold place to a warm place such as a bathroom, wait until the temperature of the terminal comes to room temperature.

- Do not splash hot water from a faucet or shower.

To ensure waterproofness/ dustproofness

To avoid water ingress, be sure to observe the following points.

･

Do not throw any liquid other than room temperature tap water on the terminal, or soak it in such liquid.

･

Firmly close the cover of nano UIM card/ microSD card slot. Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surfaces may allow water to enter.

Precautions

Page 28

･

Groove

Do not poke the earpiece, mouthpiece/ microphone, speaker, second microphone,

™

headset jack, USB Type-C

jack, etc. with a

sharp-pointed object.

･

Do not let the terminal fall. It may become scratched causing the waterproof/dustproof performance to degrade.

･

The rubber gasket on the inner side of the cover of nano UIM card/microSD card slot plays an important role in keeping waterproof/dustproof performance. Do not remove or damage them. Also, prevent dust from adhering to them.

■

Opening the cover of nano UIM card/ microSD card slot

Put your tip of finger (fingernail) into the groove and draw the cover out in the arrow direction.

Cover

■

Closing the cover of nano UIM card/ microSD card slot

Push the tray all the way in the arrow direction and firmly press parts and make sure that there are no gaps between the terminal and the cover.

Cover

You are recommended to replace the parts for maintaining waterproof/dustproof property once every two years regardless of whether any abnormality is present or not. For replacement of the parts, DOCOMO keeps the terminal at DOCOMO-specified repair office and accept for a fee.

Precautions

Page 29

Important precautions

Do not perform actions shown in the illustrations below.

Using in hot

spring

Machine-

washing

Applying strong

Attaching

sand/mud

water ow

Bath powder

Washing with brush/sponge

Soaking in

ocean water

Using Soap/Detergent/

Observe the following precautions to use the terminal properly.

･

Optional devices are not waterproof/ dustproof.

･

Do not apply water flow stronger than allowed (P.24). SO-41B provides IPX5 waterproofness, but doing so may cause malfunction.

･

If the terminal gets wet with salt water, sea water, refreshing beverage or mud or sand adhered, wash it immediately. If they dry out, it is hard to remove the dirt and it may cause damage or malfunction.

･

Do not put the terminal in hot water, use it in a sauna or apply hot airflow (from a hair dryer etc.) to it.

･

Do not move the terminal in water or slam the terminal against the surface of water.

･

If you put the terminal in tap water, be sure to have it within 30 minutes.

･

When you use the terminal in swimming pool, obey rules of the facility.

･

The terminal does not float on water.

･

Do not leave water on the terminal. In cold region, the terminal freezes up and may cause malfunction.

･

Do not leave water droplet on the earpiece, mouthpiece/microphone, speaker, second microphone and headset jack. Such water may cause talking failure.

･

If water or other liquid splashes the terminal when the cover of nano UIM card/microSD card slot is open, the liquid may enter inside of the terminal and cause electric shock or malfunction. Do not use the terminal and turn off the power. For handling, inquire of the contact on the last page.

･

If the rubber gasket on the inner side of the cover of nano UIM card/microSD card slot is damaged or deformed, replace the part at a DOCOMO-specified repair office. Note that repair may be accepted for a fee depending on the terminal condition.

･

Do not connect earphones etc. when the terminal is wet with water. Doing so may cause a malfunction.

Precautions

Page 30

DOCOMO does not guarantee actual operations under all states. Malfunctions deemed to be caused by inappropriate operation by the customer are not covered by the warranty.

Draining water from the terminal

When the terminal is wet, water may flow out after wiping it off; drain the water in the following steps.

Hold the terminal firmly and wipe off moisture on the terminal surface and back side with dry, clean cloth etc.

Shake the terminal about 20 times, firmly holding it, until no more drops of water come out (shown left). Do the s ame with the ter minal upside down (shown right).

To wipe remained water off from the gaps or the following parts, tap the terminal against a dry, clean cloth or similar material about 10 times.

･

Earpiece

･

Mouthpiece/microphone

･

Speaker

･

Second microphone

･

Headset jack

･

USB Type-C jack

Precautions

Page 31

･

Camera lens transparent plate (around the main camera)

･

Power key/Fingerprint sensor

･

Volume key/Zoom key

･

Google Assistant Key

･

Cover of nano UIM card/microSD card slot

* Turn the terminal up side down to wipe off.

Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally.

･

Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally.

･

Do not wipe off water remaining in gaps directly with a cotton swab etc.

･

Dry the terminal naturally for about 3 hours at room temperature.

Notes on charging

Check the following before and after charging.

･

Check if the terminal is not wet while charging. Never charge the battery if the terminal is wet.

･

Optional devices are not waterproof/ dustproof.

･

When charging the battery when or after the terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc.

･

Do not use the AC adapter in a bathroom, shower room, kitchen, lavatory, or other humid area. Doing so may cause fire or electric shock.

･

Do not touch the AC adapter with wet hands. Doing so may cause electric shock.

･

Never connect a Type-C plug if the terminal is wet. Although the terminal is waterproof, inserting a Type-C plug when the terminal is wet may cause an electric shock or short circuit due to moisture or foreign matter on the terminal or the Type-C plug. This can cause excessive heat, malfunction, fire, burn injury, electric shock, etc.

Precautions

Page 32

Before using the terminal

Part names and functions

Top

d e f g

Second microphone : Used for reducing noise when calling.

Front camera lens→P. 1 2 1

Notification LED→P. 6 2

Earpiece

Proximity/light sensor*1 : Detects a face approach during a call to prevent misoperation, or used for automatic control of the screen brightness.

Display (Touch screen)→P. 4 7

Mouthpiece/microphone

USB Type-C jack : Used for charging etc. It supports USB Power Delivery.

Speaker

Volume key/Zoom key : Use to adjust each sound volume, shoot with the camera, set silent mode, etc.

Power key/Fingerprint sensor*1 : Use to turn on/off the power or screen display, or perform fingerprint

authentication. Press and hold this key for at least 1 second to display the menu where you can operate "Emergency",

"Power off", "Restart" or "Force restart guide".→P.41 , P.95

Google Assistant Key

j k

Bottom

nano UIM card/microSD card slot

Headset jack→P. 2 1 6

RightLeft Front

Before using the terminal

Page 33

Back

Wi-Fi/Bluetooth/GPS antenna

LTE /FO MA a nten na

Camera lens→P. 1 2 1

Flash/Photo light

mark→P. 1 3 2 *1 Do not cover the sensor area with a sticker etc. *2 It is built into the terminal. Covering this area with

your hand may affect the quality of communications.

❖

Note

･

The back panel cannot be removed. Attempting to remove the back panel with excessive force may cause damage or a malfunction.

･

The battery is built into the terminal and not removal.

nano UIM card

Nano UIM card is an IC card which stores information such as your phone number.

･

You can use the terminal with a nano UIM card. If you have a docomo mini UIM card, UIM, or FOMA card, bring it to a docomo Shop to replace it.

･

When a nano UIM card is not inserted to the terminal, making calls, packet communication, etc. are not available.

･

For details on nano UIM card, refer to NTT DOCOMO website.

･

Turn off the terminal before installing/ removing the nano UIM card.

･

For opening/closing the cover of nano UIM card/microSD card slot, see "To ensure waterproofness/dustproofness" (P.25).

■

Security codes of nano UIM card

The nano UIM card has the security code of PIN code (P.45).

❖

Information

･

Please be careful not to touch or scratch the IC when handling nano UIM cards. Doing so may cause a malfunction or damage.

Before using the terminal

Page 34

Installing nano UIM card

Draw the cover of nano UIM card/

microSD card slot (P.26).

Pull out the tray straight from the

terminal.

Hold the terminal horizontally,

insert the tray with the card into the terminal, and then push it straight.

･

Check the orientation of the terminal and the tray.

Tray

Set a nano UIM card in the tray

with the IC face up.

･

Make sure that the corner cut of the card is oriented properly.

･

Be sure to fit the nano UIM card into the tray so that it does not shift.

Corner cut

Tray

Before using the terminal

Page 35

Push the tray into the end, firmly

press each point indicated with ,

and then make sure that there are

no gaps between the terminal and

the cover.

Cover

nano UIM card

Tray

Hold the terminal horizontally,

insert the tray into the terminal, and then push it straight.

･

Check the orientation of the terminal and the tray.

Removing nano UIM card

Draw the cover of nano UIM card/

microSD card slot (P.26).

Pull out the tray straight from the

terminal (P.32).

Remove the nano UIM card from

the tray.

･

Put your fingernail to a gap between the nano UIM card and the tray to take out.

Tray

Firmly push the tray into the end

and make sure that there are no gaps between the terminal and the cover (P.33).

Before using the terminal

Page 36

microSD card

You can save the data in the terminal to a microSD card or import data from the microSD card to the terminal.

･

The terminal supports microSD card of up to 2GB, and microSDHC card of up to 32GB, microSDXC card of up to 1TB (As of April,

2021).

･

DOCOMO does not guarantee operations of any commercially available microSD card. For compatible microSD cards, contact each manufacturer of microSD card.

･

A microSDXC card can be used only on a SDXC-compatible device. Do not install a microSDXC card to a non-microSDXCcompatible device because doing so may damage or destroy data saved on the microSDXC card.

･

If you want to reuse a microSDXC card on which data is destroyed, format microSDXC card (all data will be erased) on an SDXCcompatible device.

･

When copying data to/from a non-SDXCcompatible device, use a card (microSDHC card, microSD card, etc.) complying with standards of device.

･

The terminal supports microSD cards of up to Class 10 and UHS speed class 1. Note that the speed class indicates performance of microSD cards and all the functions may not be performed at the speed class rate.

･

Although a microSD card can be used on other compatible device, data which is transferred from the other device may not be viewed/played on the terminal. Also, data saved to the microSD card from the terminal may not be viewed/played on another devices.

･

Turn off the terminal before installing/ removing the microSD card.

･

For opening/closing the cover of nano UIM card/microSD card slot, see "To ensure waterproofness/dustproofness" (P.25).

Before using the terminal

Page 37

Installing microSD card

Draw the cover of nano UIM card/

microSD card slot (P.26).

Turn the back side of the terminal

up and then pull out the tray

straight.

Set a microSD card in the tray with

the contacts side up.

･

Be sure to fit the microSD card into the tray so that it does not shift.

Contact of microSD card

Tray

Hold the terminal horizontally,

insert the tray with the card into the terminal, and then push it straight.

･

Check the orientation of the terminal and the tray.

Push the tray into the end, firmly

press each point indicated with , and then make sure that there are no gaps between the terminal and the cover.

･

When the terminal is turned on, appears on the status bar.

Tray

Cover

Before using the terminal

Page 38

Removing microSD card

Draw the cover of nano UIM card/

microSD card slot (P.26).

Turn the back side of the terminal

up and then pull out the tray

straight (P.35).

Remove the microSD card from the

tray.

･

Put your fingernail to a gap between the microSD card and the tray to take out.

microSD card

Tray

Hold the terminal horizontally,

insert the tray into the terminal, and then push it straight.

･

Check the orientation of the terminal and the tray.

Firmly push the tray into the end

and make sure that there are no gaps between the terminal and the cover (P.35).

Tray

Before using the terminal

Page 39

Charging

The internal battery is not fully charged at the time of purchase.

･

Estimated charging time (P.216)

Available time on full charge (estimate)

The available time differs depending on operating environment or the internal battery condition.

･

Estimated available time (P.216)

Life of the internal battery

･

The internal battery is a consumable part. Each time the internal battery is recharged, the battery usage time per one charge gradually decreases.

･

When the battery usage time per one charge becomes about half of that at the time of purchased, replacing the internal battery is recommended because the internal batter y is near the end of life.

･

Using the application or shooting videos for a long time while charging may shorten the lifetime of the internal battery.

･

To check performance of the internal battery, from the Home screen, tap

[Settings]

[About phone]u[Battery life].

Before charging

･

It is recommended to use the AC Adapter 07 (optional) for charging. For handling the AC Adapter 07, refer to the AC Adapter 07 manual.

･

The AC Adapter 07 is compatible with 100V to 240V AC. For using the terminal overseas, a plug adapter that fits the electrical outlets in the place you stay is needed. Do not use an electrical transformer for overseas use to charge the terminal.

･

Use a compatible AC adapter or USB cable A to C for charging. If you use a non-compatible charger, charging may fail or the terminal operations may not work properly.

･

Insert and pull out an AC adapter or plug of USB cable A to C slowly and evenly without applying excessive force.

･

When charging is started, the notification LED of the terminal lights in the color according to the battery level (P.62).

･

You can check the battery level on the status bar at the top of screen, or operate from the Home screen, tap

[Settings]u[Battery].

Before using the terminal

Page 40

･

If you start charging with the terminal powered off, the screen indicating charging status activates although you cannot operate the terminal. Therefore, do not charge the battery in a place where the powering off is required.

･

You can check the latest charging equipment compatible with the terminal in the DOCOMO online shop. https://onlineshop.smt.docomo.ne.jp/ options/search.html (in Japanese only)

Saving battery life (Battery Care)

Battery Care is a function that learns your charging habit (time zone for connecting to charging equipment long) to adjust charging speed and keep battery performance better so as to extend battery life.

From the Home screen,

[Settings]u[Battery]u[Battery

Care].

･

The Battery Care screen appears.

Tap of "Use Battery Care".

❖

Information

･

To turn off Battery Care charging, tap of "Use Battery Care" in Step 2.

･

To switching to usual charging during Battery Care charging, drag the status bar down notification of Battery Care (P.65) CHARGING].

･

To set the time for Battery Care manually, tap [Custom] in the Battery Care screen. Battery Care charging is available when you start charging between the times set in "Start time" and "Target time for full charge".

❖

Note

･

It ma y take 7 day s or more to c omplete learnin g your habit.

Open the

[REGULAR

Before using the terminal

Page 41

Charging with AC adapter

When using AC Adapter 07 (optional) for charging, do the following procedures.

Insert the Type-C plug of the AC

adapter horizontally into the USB

Type-C jack of the terminal.

Unfold the power plug of the AC

adapter and insert it into a power

outlet.

･

When charging is started with the power on, the charging start sound is heard and the notification LED of the terminal turns on (P.62).

Notication LED

USB Type-C jack

Type-C plug

AC adapter

When charging is complete,

remove the power plug of the AC adapter from the power outlet, and then remove the Type-C plug horizontally from the terminal.

❖

Note

･

Do not connect the Type-C plug of the AC adapter forcibly. Wrong connection may cause damage.

Charging with DC adapter

DC Adapter 05 (optional) is an adapter for supplying power from a car accessory socket (12V/24V). When using DC Adapter 05, USB cable A to C 02 (optional) is required. For details on handling, refer to the manual of the DC adapter or USB cable A to C.

Before using the terminal

Page 42

Charging with a PC

To charge the terminal by connecting to a PC, USB cable A to C 02 (optional) is required.

Insert a Type-C plug of the USB

cable A to C horizontally into the

USB Type-C jack of the terminal.

Insert a USB plug of the USB cable

A to C to a USB port of PC.

･

When charging is started with the power on, the charging start sound is heard and the notification LED of the terminal turns on (P.62).

Notication LED

USB plug

USB Type-C jack

USB cable A to C

Type-C plug

･

When a screen for requesting access to the device data appears, tap [DENY ].

･

If the installation screen for the terminal's driver software appears on your PC, please wait a moment for the installation to complete.

･

When a confirmation screen of installing software appears on the terminal, tap [SKIP].

When charging is complete,

remove the USB plug of the USB cable A to C from the USB port of PC and then remove the Type-C plug horizontally from the terminal.

❖

Note

･

Do not connect the Type-C plug of the USB cable A to C forcibly. Wrong connection may cause damage.

FCC ID

To view the regulatory compliance mark.

Find and tap [Settings]u[About

phone]

Regulatory compliance mark such as FCC ID is displayed on the screen.

[Certificates].

Before using the terminal

Page 43

Turning power on/off

Turning power on

Press and hold the power key until

the screen turns on.

･

The terminal vibrates and the lock screen appears after a while.

･

When you first turn on the power and

ようこそ

(Welcome)" is displayed,

" follow the onscreen instructions to make the initial settings (P.42).

Unlock the screen lock.

･

The Home screen appears.

･

Unlocking the screen lock (P.42).

❖

Information

･

When PIN code (P.46) is set, enter the PIN code on the PIN code entry screen (P.46).

Turning power off

Press and hold the power key for at

least 1 second.

[Power off].

･

To restart the terminal, tap [Restart].

Setting sleep mode

Set sleep mode to turn off the screen so that you can avoid unintended operations of the display (touch screen) or the keys, or lock the screen.

Press the power key.

･

Press the power key again to exit from sleep mode and turn on the screen.

❖

Information

･

When the specified time set in "Screen timeout" (P.163) elapses with no operation performed, the screen will turn off automatically and then go into sleep mode.

Before using the terminal

Page 44

Unlocking the screen lock

The lock screen appears when you turn on the power or press the power key to exit from sleep mode.

On the lock screen, swipe (flick)

the screen.

❖

Information

･

On the lock screen, swipe (flick) or to use Google Assistant or the camera.

･

You can change the screen lock unlocking method (P.170).

･

Once you register your fingerprint in the Fingerprint Manager, you can use fingerprint authentication to unlock the screen (P.172).

Initial settings

When you first turn on the power and "

そ

(Welcome)" is displayed, follow the onscreen instructions to make initial settings, such as individual functions and services.

[GET STARTED].

･

日本語

Tap [

(Japanese)] to change the

language.

･

Tap [VISUAL AIDS] to make settings related to the accessibility functions.

･

Follow the onscreen instructions to make the following settings.

- Important information setting

- Setting the network connection

- Copy apps & data

- Set your Google account

- Setting the Google Services

- Setting the screen lock

- Setting Google Assistant

- Confirming continuing setup

When the docomo initial setting

screen appears, confirm the

content

･

[Next].

Follow the onscreen instructions to make the following confirmations and settings.

- d ACCOUNT settings

- Setting functions and services in one operation

Before using the terminal

ようこ

Page 45

- Setting docomo cloud

- Setting the home app

- Review additional apps

When the setup completion screen

appears, [FINISH].

❖

Information

･

The displayed setting etc. may differ depending on operation of the terminal etc.

･

When the screen to select docomo services appears after completion of the initial settings, follow the onscreen instructions to set or confirm.

･

Some settings can be changed later (P.43, P.44, P.74, P.147, P.170, P.172, P.176, P.179, P.183).

･

When setting the online services, make sure to connect to the network (P.63).

･

You can use the terminal without setting up a Google account, however the Google services such as Gmail, Google Play, etc. are not available.

Setting up a Google account

Google account is an ID/password to use Google services. By setting Google account to the terminal, you can use Gmail to send Email, use Google Play to download applications or contents such as games. If you have not set up a Google account in the initial settings or to add other Google account, you can set it up as follows.

From the Home screen,

[Settings]u[Accounts]u[Add

account]

･

❖

Information

･

Google account can be registered as backup account by turning on the item of backing up data to your Google Drive on the "Google Services" screen when registering (P.178).

･

You can use the terminal without setting up a Google account, however the Google services such as Gmail, Google Play, etc. are not available.

･

To set ON/OFF of items to auto-sync, from the Home screen, account

[Google].

After this step, follow the onscreen instructions.

[Settings]u[Accounts]uTap the Goo gle

[Account sync].

Before using the terminal

Page 46

Setting up d ACCOUNT

d ACCOUNT is an ID/password that is necessary to use the services available with d Account or d points on a smartphone, tablet, or PC. When you do not set up d ACCOUNT in the initial settings, you can set as follows.

From the Home screen, tap

[Settings]u[docomo service/

cloud]

[d ACCOUNT setting].

･

If the d ACCOUNT confirmation screen etc. appears, follow the onscreen instructions.

[Set yo ur d ACCOUNT ]/[Create new

d ACCOUNT].

･

After this step, follow the onscreen instructions.

❖

Information

･

For details on d ACCOUNT, in Step 2, tap u[Help] to see the Help of d ACCOUNT setting.

Security codes for the terminal

Some functions provided for convenient use of the terminal require the security code to use them. Besides the security code for locking the terminal, the network security code necessary for the network services etc. are available. Make use of the terminal using an appropriate security code according to the purpose.

■

Notes on the security codes

･

Do not use a number that is easy to guess, such as "birth date", "part of your phone number", "street address number or room number", "1111", and "1234". Make sure to make a note of the security code you set lest you should forget it.

･

Be very careful not to let others know your security code. If your security code is known by anyone else, DOCOMO shall have no liability for any loss due to any unauthorized use of it.

･

If you forget your security codes, you must bring your official identification (such as driver's license), the terminal, and nano UIM card with you to a docomo Shop. For details, ask the contact on the last page.

Before using the terminal

Page 47

･

The PIN Unlocking Key is written on the subscription form (copy for customer) handed when subscribing at a docomo Shop. If you subscribed other than at a docomo Shop, ask the contact on the last page.

■

PIN/Password for screen lock

It is a security code for using the screen lock function of the terminal (P.170).

■

Network security code

The network security code is a 4-digit number necessary for identification or using the docomo network services at reception of your request in docomo Shop, or at docomo Information Center or "

ポート

(Customer support)". It can be set

お客様サ

any number at the subscription and also changed later by yourself.

･

For details on network security code, refer to NTT DOCOMO website.

■

PIN code

The nano UIM card has the security code of PIN code. The code is set to "0000" at subscription, which you can change by yourself (P.46). PIN code is a 4- to 8-digit security number (code) that must be entered for user confirmation to prevent unauthorized use of nano UIM card by a third party every time you insert the nano UIM card into the terminal or when the terminal is powered on. Entering the PIN code enables making/ receiving calls and terminal operation.

･

If you use a newly purchased terminal with the nano UIM card you have been using, use the PIN code set on the former terminal. If you did not change the setting, the code is "0000".

･

If you enter a wrong PIN code 3 times consecutively, the PIN code is locked and cannot be used anymore. In this case, unlock with "PIN Unlock Key (PUK code)" (P.46).

Before using the terminal

Page 48

■

PIN Unlock Key (PUK code)

The PUK code is an 8-digit number for canceling the locked PIN code. The PUK code cannot be changed by yourself.

･

If you failed to enter PUK code 10 times consecutively, the nano UIM card is locked. In that case, ask the contact on the last page.

Setting a PIN code

By entering PIN code when powered on, you can protect from improper use.

From the Home screen,

[Settings]u[Security]u[SIM

card lock]

Enter PIN codeu[OK].

[Lock SIM card].

Entering the PIN code when powered on

On the PIN code entry screen,

enter the PIN code.

❖

Information

･

When "Use SIM" (P.149) is OFF, the PIN code entry screen appears after "Use SIM" is switched to ON.

Unlocking PIN lock

Enter the PUK codeuTap .

Enter a new PIN codeuTap .

Enter the PIN code againuTap .

Changing the PIN code

･

You can change only when you activate the SIM card lock.

From the Home screen,

[Settings]u[Security]u[SIM

card lock]

Enter the current PIN codeu[OK].

Enter a new PIN codeu[OK].

Enter the new PIN code again

[OK].

[Change SIM PIN].

Before using the terminal

Page 49

Basic operations

Using the display (touch screen)

Precautions on using the display (touch screen)

･

The display (touch screen) is designed for being touched lightly with fingers. Do not push the touch screen hard with a finger or press sharp-pointed objects (nail, ballpoint pen, pin, etc.) against the screen.

･

Touching the display (touch screen) may not work in the following cases. Note that it may cause a malfunction.

- Operation with a gloved hand

- Operation with tip of fingernail

- Operation with foreign object on the screen

- Operation with protective sheet or seal on the screen

- Operation on the wet display (touch screen)

- Operation with fingers wet with sweat or water

- Operation under water

Operations on the display (touch screen)

■

Tap

Touch an item such as icon or menu with your finger lightly and release it.

･

Double-tap means tapping twice quickly.

■

Touch and hold

Touch and hold an icon or menu item long.

■

Swipe (flick)

Touch the screen and flick up/down or left/ right.

■

Drag

Touch the screen, drag to the desired position and release the finger.

■

Slide

When whole content cannot be displayed, while lightly touching the screen, move your finger to desired direction.

Basic operations

Page 50

■

Scroll

When whole content cannot be displayed, flick up/down/left/right displayed content to scroll (move) the display position.

■

Pinch

Touch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance to zoom in/out screen display.

Using Side sense

Side sense is a function that allows you to operate the terminal with one hand and you can use it by operating the side sense bar displayed on the screen.

･

You can operate the side sense function on every screen which the side sense bar is displayed.

･

Before use of Side sense, from the Home screen, tap [Advanced]u[Side sense]u.

[Settings]u[Display]

Side sense bar

Basic operations

Page 51

Double-tap the side sense bar to open the side sense menu from which you can activate applications or display the Notification panel. Slide the side sense bar up to display the multi-window menu from which you can activate the Multi-window (split screen). Also, slide the side sense bar down to undo the operation (returning to the previous screen).

Double-tap Slide up

Slide down

❖

Information

･

You can change the operation range, sensitivity of the side sense bar, etc. in "Side sense" (P.164). Set as your preference.

･

Side sense feature is not available in the following cases.

- Displaying the screen in landscape view

- Call is incoming/dialing/During a call

- Displaying the shooting screen

Moving the side sense bar

Touch and hold the side sense bar.

･

If the operation is unavailable, once display the side sense menu and then operate again.

Drag it to a desired location.

･

When you drag it to other than the left/right-end of the screen, the side sense bar changes to .

❖

Information

･

You can move by touching and holding and then dragging in the desired direction. To restore to the original display, drag it to the left- /right-end of the screen.

Basic operations

Page 52

Using the Side sense menu

Double-tap the side sens bar.

･

The Side sense menu appears.

･

If the explanation appears, tap [START].

Application icon list

･

Icons of recommended applications which are predicted by your usage condition are displayed.

･

You can also set to display favorite application icons (P.164).

Notifications

･

Open the Notification panel (P.64).

One-handed mode

･

Activate One-handed mode (P.72).

More apps

･

Display more applications that are not currently shown in the application icon list.

Multi-window

･

Switch to the Multi-window menu (P.51).

Advanced

･

Open the "Side sense" in the Settings menu (P.164).

❖

Information

･

You can move the menu position up/down by dragging the screen while the Side sense menu is displayed.

･

To end the Side sense menu, perform any of the following operations.

-Tap or

- Tap outside of the Side sense menu

- Double-tap the side sens bar.

Basic operations

Page 53

Using the Multi-window menu

You can activate Multi-window (split screen) using Side sense.

･

Operations in the split screen (P.68)

Slide the side sense bar up

･

The Multi-window menu appears.

･

If the explanation appears, tap [START].

Application icon list

･

Icons of recommended applications which are predicted by your usage condition are displayed.

･

Tap the application icon to open the application in the multi-window screen (split screen).

･

You can switch applications in the lower part of the screen by tapping any application icon when Multi-window (split screen) is activated. To switch applications in the upper part of the screen, tap the upper part of the window illustration beside the Multi-window menu and then tap any application icon.

Pairs of applications (Combination)

･

Pairs of applications which are predicted by your usage condition are displayed.

･

You can also set to display your desired pairs (P.164).

Exit Multi-window

･

Exit Multi-window (split screen).

Swap windows

･

Swap applications between the upper part and lower part when Multi-window (split screen) is activated.

More apps

･

Display more applications that are not currently shown in the application icon list.

Side sense menu

･

Switch to the Side sense menu (P.50).

Advanced

･

Opens "Multi-window menu" (P.164) in the Settings menu.

❖

Information

･

You can move the menu position up/down by dragging the screen while the Multi-window menu is displayed.

･

To exit the Multi-window menu, perform any of the following operations.

-Tap or

- Tap outside of the Multi-window menu

- Slide the side sense bar up

Basic operations

Page 54

Basic key icon operation

The following operations can be performed by tapping the key icon shown in the bottom of the screen.

Back Go back to the previous screen. Or

Home Go to the Home screen.

History Use the task manager (P.67).

* In this manual, the key icon operations are described

as , , and .

❖

Information

･

When "One-handed mode" (P.163) is set to ON, you can activate the one-handed mode by doubletapping (P.72).

･

The color of key icon may differ depending on displayed screen.

close the menu, the Notification panel, etc.

Touch and hold the icon to open the Google Assistant.

Also, you can use the following functions.

･

Screenshot (P.53)

･

Split screen (P.68)

Switching portrait or landscape view automatically

You can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation.

From the Home screen,

[Settings]u[Display].

❖

･

of "Auto-rotate screen".

Information

You can also switch the landscape/portrait view by tapping if appears when you change the terminal orientation although this feature is set to OFF. Some displayed screens are fixed in portrait orientation or landscape orientation. Changing orientation of the terminal in nearly horizontal state against the ground may not switch the screen to the portrait view/landscape view automatically. You can also set from the Quick settings panel (P.66).

Setting Silent mode

･

Even when the silent mode is set, muting of shutter sound, start/end sound for video recording, alarm sound, and audio sound of video, music, etc. is not available.

Basic operations

Page 55

･

If the sound volume is adjusted in "Ring and notification volume" (P.166) in silent mode, the silent mode setting is canceled.

･

You can adjust media sound by dragging up/ down the slider on the volume control bar which appears when the volume key is pressed. Tap to display the sound setting screen and you can change the volume of call sound, ringtone and notification sound, and alarm sound.

Setting Silent mode (Vibrate)

Press the volume up or down key.

･

The volume control bar appears.

･

The icon for the volume control bar changes to .

Setting Silent mode (Mute)

Press the volume up or down key.

･

The volume control bar appears.

･

The icon for the volume control bar changes to .

Capturing the displayed screen

You can capture the currently displayed screen as a still image (Take screenshot).

･

Capturing may not be available depending on screen display.

On a screen you want to capture,

press and hold the power key and the volume down key at the same time for at least 1 second.

･

A still image is saved, and then its thumbnail and the menu are displayed for a certain period of time in the lowerleft of screen.

❖

Information

･

You can capture the screen which is shown as a thumbnail on the task manager (P.67) by tapping [Screenshot].

･

You can tap the thumbnail or the options to edit still image or send it via Bluetooth or email. Or, you can turn off the display of thumbnail and the menu (still image remains) by tapping on the upper right of thumbnail.

Basic operations

Page 56

Recording the displayed screen Selecting an application to use

You can record the currently displayed video screen (Screen Record).

･

Recording may not be available depending on displayed screen.

Drag the status bar down with two

fingers.

･

The Quick settings panel appears.

Swipe (flick) the Quick setting

tools left.

[Screen Record].

･

The confirmation screen for start of recording appears. Set "Record audio" etc. before start of recording.

[START].

･

Recording starts and and appear on the status bar.

･

To stop recording, drag the status bar down and then tap "Screen Recorder" notification.

When you have some options of applications for certain operations such as sending an email or displaying an image, an application selection screen appears.

<Example> To select an application for sending

From the Home screen,

[docomo phonebook]uSelect

a contact

･

The application selection screen appears.

Select a mail address.

Select the applicationu[Just once]/[Always].

･

Select "Just once" to view available applications each time, or "Always" to use the same application all the time. If you select "Always", the application selection screen does not appear the next time you perform the same task.

･

If you selected "Just once" previously for the same task, the screen with the application selected appears. To use another application, select in the "Use a different app" area.

Basic operations

Page 57

❖

Information

･

Some tasks may require you to select an application each time, with "Just once" or "Always" not displayed on an application selection screen.

･

To deselect the application which is set to "Always", from the Home screen, tap notifications] application you want to deselect [Open by default]u[CLEAR DEFAULTS].

[SEE ALL XX APPS]uTap an

[Settings]u[Apps &

[Advanced]

Setting an application's permissions

When the first time you activate an application or function that accesses the other functions or information of your terminal, the confirmation screen to request permissions to access rights may appear. When you approve these access rights, the corresponding functions and information become available to the application/ function.

<Example> When activating the "Schedule"

application for the first time

From the Home screen,

[Schedule].

･

The explanation screen about permission may appears.

[OK].

･

The confirmation screen appears.

[ALLOW]/[DENY]

･

When the other confirmation screen appears, confirm the content and then repeat the operation.

❖

Information

･

If permission is not granted, some applications/ functions may not work, or use of the functions may be limited.

･

To change setting of permissions, from the Home screen, tap [SEE ALL XX APPS]uTap any application you want to change the setting permission to change

･

Depending on application/function, the explanation screen about permission may not appear. Also, number of times of the confirmation screen or the display may differ. Check the displayed contents carefully and follow the onscreen instructions.

･

In this manual, description of the confirmation screen may be omitted.

[Settings]u[Apps & notifications]

[Permissions]uTap th e

[Allow]/[Deny].

Basic operations

Page 58

Character entry

Enter characters using the software keyboard (On-screen keyboard) which appears when you tap the character input box in a mail, phonebook, etc. Input method is set to "Gboard" by default.

❖

Information

･

To hide software keyboard, tap displayed at the lower left of the screen.

･

For details on Gboard, in the character entry screen,

tap Support.

･

Depending on your usage condition, keyboard display or the operations may be changed.

Switching the input method

You can change to the input method other than Gboard.

･

You can operate it when the other input method is installed on the terminal and set it as a use keyboard in "Manage on-screen keyboards" (P.179).

[Help & feedback] and then refer to

While entering characters, tap at the bottom of the screen.

･

The input method selection screen appears.

Select the input method you want to use.

❖

Information

･

When the input method you want to use is not listed in the selection screen, tap of the input method you want to use in "Manage on-screen keyboards" (P.179).

Software keyboard

The default software keyboard is a Japanese keyboard and its layout is "12 keys" when the language is set to Japanese. You can add the following layouts to the Japanese keyboard.

･

Character input method (P.57)

12 keys

QWERTY

Handwriting

GODAN

Keyboard with the same key arrangement as a mobile phone. Repeatedly tap a key to select a character (multi-tap input). Flick input is also available.

Keyboard with characters allocated in the same arrangement as general PCs. Enter Japanese in Roman character. Flick input is also available.

Keyboard for inputting characters by handwriting.

Keyboard for inputting Japanese with roman characters.

Basic operations

Page 59

Adding the layout for Japanese keyboard

To use the layouts other than 12 keys, add them beforehand.

In the character entry screen,

[Languages].

[Japanese 12 keys].

Put checkmarks to the layouts

[Done].

❖

Information

･

Once the layout is added, will be displayed on the software keyboard and the keyboard can be switched every time you tap the icon. Also, touch and hold or to display the keyboard change screen and you can switch the keyboards.

･

To add the other language's keyboard, in Step 2, tap [ADD KEYBOARD] the country/region etc. as required to the layouts language.

･

If the layout selection screen appears when you tap the character entry field, you can set the layout for Kana or Alphabet mode.

Select the language etc.uSelect

[Done]. Available layouts vary by

Put checkmarks

Character input method

When you tap a key on the software keyboard, candidates list for the entered characters appears. Tap a word to enter from the candidate list, text can be input one after another. Japanese keyboard in 12 keys and QWERTY layouts is explained in this section.

a b

c d e f

a b

m e

n f

Too l bar Displays the tool icon list (P.59).

Switches the tool icon to hide/display.

Shows characters entered by Multi-tap input (P.60) in the order that is reverse of the regular one. Or undoes character conversion after it is decided.

Keypad

QWERTY

h i j k l

d j

i l

Basic operations

Page 60

Moves the cursor to the left. Or changes range of character conversion when it is not yet decided. Swipe (Flick) up/down/left/right to move the cursor (the operation may not be available depending on condition).

/ Display the list of emoji/sticker/smiley etc. In QWERTY keyboard, enters a punctuation mark. Touch and hold it to display the icons and you can switch to the one-handed mode, or display the list of emoji etc. or the setting screen.

/ /

Switches the character mode to "Kana"

→

"Number" in order. Touch and hold it to display icons with which you can display the Settings screen or switch to the one-handed mode.

Puts a sonant mark/p-sound mark, or switches to uppercase/lowercase.

It is appeared when the layout for Japanese keyboard or the keyboard for other language is added. Tap it to switch the keyboard. Touch and hold it to display the keyboard change screen.

Switch to voice input to enter characters with voice.

Deletes the character before the cursor.

Moves the cursor to the right. Or changes range of character conversion when it is not yet decided. Swipe (Flick) up/down/left/right to move the cursor (the operation may not be available depending on condition).

→

"Al ph ab et"

/ Enters a space. Before confirming conversion when entering characters in Kana mode, the display changes to " the conversion candidates. Touch and hold it to display the keyboard change screen (the operation may not be available depending on condition).

変換

(Convert)". Tap it to display/switch

Enters a line feed. Tap it to decide characters before conversion is decided. * In some screens, , , , , etc.

appear.

Switches the keyboards each time you tap. Touch and hold it to display the keyboard change screen.

/ Switches entries between lower case letter and first capital letter. Double-tap to change the key to for entering upper case letter.

❖

Information

･

To enlarge the display area, tap in the candidate list. To display the software keyboard, tap .

Basic operations

Page 61

Using the tool icon

Tap the tool icon on the tool bar to operate as follows.

(Sticker)

(Clipboard)

(Settings) (Theme)

(One-handed)

(Text Editing)

(Share

Gboard)

(Translate)

(Floating)

Display the list of emoji/sticker/ smiley etc.

Quote characters saved to the clipboard and enter characters.

Display the Settings screen. Change software keyboard

theme. Display the list of tool icons that

are not displayed in the tool bar.

･

Touch and hold the tool icon and drag to the tool bar to display in the tool bar.

Switches to the software keyboard whose size can be operated with one hand.

Select, cut, copy, or paste characters.

Send information such as the current layout via Bluetooth, email, etc.

Translate word, sentence, etc. and enter it.

Allow the software keyboard to move to the other position.

Flick input

Touch a key of 12 keys to display a character, number, or symbol that are assigned to the key. Flick to the direction of a target character etc. to enter the character.

･

On the QWERTY keyboard, flick each key up or down to enter number.

<Example> Entering "な" column character on 12

You can ent er "な" only by tapping. Flick left for " for "

keys

に

", up for "ぬ", right for "ね" and down

の

Basic operations

Page 62

Multi-tap input

On the 12 keys keyboard, tap the same key consecutively to enter a character, number, or symbol that are assigned to the key. To enter characters etc. assigned to the same key consecutively, wait until the color of the cursor indicating the conversion range is changed (approx. 1 second) and then enter the next character. To enter the next character soon, tap to change the color of cursor.

<Example> Entering "あお"

Tap "あ" onceuWai t fo r

approximately 1 second (until the color of cursor is changed).

Tap "あ" 5 times.

Tap "あ" onceu (immediately).

Tap "あ" 5 times.

Editing text

You can cut or copy text in character entry screen or web page and then past it to the other application etc.

Touch and hold text.

･

The text is selected and the edit menu appears nearby.

･

Alternatively, double-tap text.

Drag / to up/down/left/right

to select range of the text.

Tap the item in the edit menu.

Cut Copy Paste

Select all Web search

Cut a selected character string. Copy a selected character string. Paste a copied/cut character

string. Use the selected text in the other

application. Select all text. Search for online information

related to the selected character string.

Display the editing menu that could not be shown. Tap to return to the previous editing menu.

Basic operations

Page 63

❖

Information

･

To paste a copied or cut character string, touch and hold a position to insert already entered, tap a position to insert [Paste].

･

On some applications, these functions may not be available or the editing menu may appear different.

Tap [Paste]. When text is

Tap

Personal dictionary

Add words to Personal dictionary beforehand to have them appeared preferentially in the candidate list when entering characters.

In the character entry screen,

[Dictionary]u[Personal

dictionary]

Follow the onscreen instructions

to enter a word and the reading.

❖

Information

･

To delete registered words, in Step 2, select the words to delete

Select a language.

Setting character entry

Set character entry per input method such as Gboard.

From the Home screen,

[Settings]u[System]u[Languages & input].

[On-screen keyboard]uSelect the

input method.

･

Tap an item displayed on the screen to set.

❖

Information

･

The items vary depending on the input method.

･

For Gboard, alternatively, tap in the character entry screen to display the Settings screen.

･

If the input method is not displayed, in Step 2, [Onscreen keyboard] Tap of the input method you want to use.

[Manage on-screen keyboards]

Basic operations

Page 64

Notification LED

Notification LED provides information on the terminal status, incoming calls, mail reception, etc.

LED color and

lighting

Red

Orange

Green

Flashing red Flashing white*Notification of missed call, new

* Flashing in sleep mode.

Charging (the battery level is 14% or less)

Charging (the battery level is 15% 89%)

Charging (the battery level is 90% or more)

The battery level is 14% or less

Gmail, etc.

Indication

Screen display and the icons

You can check notifications from applications, the terminal status, etc. with the icons on the status bar. Display the Notification panel to check detail information such as notifications appeared in the status bar. Also, you can open the Quick settings panel and set ON/OFF of the functions.

Status bar

In the status bar at the top of screen, the notification icons of new mail, running operation, etc. and the status icons of the signal status, battery level, etc. appear.

Notication icon Status icon

Status bar

Basic operations

Page 65

Status icon

The main status icons displayed on the status bar are as follows.

Signal strength 4G (LTE) available HSPA available 3G available During International roaming Out of service Connected to Wi-Fi Connected to a Wi-Fi network with

no access to the Internet. The Wi-Fi signal is poor.

Portable hotspot (Wi-Fi tethering) ON P.153 Connected to Bluetooth device P.187 Airplane mode activated P.152 Silent mode (vibrate) ON P.53 Silent mode (no vibrate) is set P.53 Calling with hands-free (speaker ON) P.100 Calling with the mouthpiece/

microphone OFF (mute) Alarm etc. is set P.141 Silent mode is set P.161 Positioning with GPS P.138 Connected to VPN P.155 Data Saver is set P.155 Recording with Screen Record P.54 STAMINA Battery status

mode ON P.162

― ― ― ― ― ―

P. 1 4 7 P. 1 4 7

P. 9 9

―

The battery is charging P.37 Charging is required

*1 appears on the right of the icon during

communication.

*2 is always displayed when the terminal is

―

connected with LTE.

Notification icon

The main notification icons displayed on the status bar are as follows.

New Gmail message P.115 New +Message message P.109 Receiving/downloading data Sending/uploading data Notification of data reception etc. via

Bluetooth communication microSD card is detected/currently

mounted Update notice of application Software update notification P.208 Call is incoming/dialing/during a call P.95 Call is on hold P.99 Missed call P.101 Notification from Answering

Machine/voicemail Message is recorded on Answering

Machine Notification from Memo/Schedule P.91, P.140 Stopwatch is running Timer is in use

― ―

P. 1 8 8

P. 3 5

―

P. 98 , P.1 0 2

P. 1 4 2 P. 1 4 2

Basic operations

Page 66

Alarm is sounding/Alarm is snoozing/

P. 1 4 1

Next alarm exist USB device is connected P.167 Wi-Fi open network available P.148 Charging with Battery Care P.38 Battery is low (15% or less) Notification of error/warning Hidden notifications Omakase Lock is set Notification from docomo Data Copy P.143 SuguApp is available P.69 Notification for Screen Record P.54 Available internal storage is getting

low Authentication failed when you set

up your d ACCOUNT

* Appears when switched to the Home screen etc.

Notification panel

When the notification icons appear on the status bar, you can open the Notification panel to check the notifications, activate corresponding application, etc.

― ― ― ―

―

P. 4 4

Drag the status bar down.

a b

Quick setting tools

･

A part of the quick setting tools (P.66) are displayed.

･

Tap it to turn on/off each function.

･

Touch and hold it to display the setting screen, etc. depending on function.

Open the Quick settings panel

･

Drag down to open the Quick settings panel (P.66).

e f

e g

Basic operations

Page 67

Notifications

･

Notifications are categorized by "Conversations", "Notifications", "Silent", etc. depending on type, setting, etc.

･

When you tap notification with while the application that is compatible with the split screen is activated, the application can be displayed in the split screen. Or, while the application that is compatible with the split screen is not activated, it activates in the normal screen.

･

Swipe (flick) left or right the notification to clear from the list. However, some notifications may not be cleared.

･

To change the notification setting or set "Silent", "Default", etc., drag the notification left or right and tap the displayed , or touch and hold the notification. However, the setting may not be available for some notifications.

･

If / appears when a notification in Conversations, you can set the floating icon (bubble) to display/hide. The floating icon (bubble) can be displayed even while the other application is running so that you can check arrival notifications of conversation or check/send messages by tapping it.

Manage

･

Change notification setting (P.160).

･

It is shown as "History" when "Notification history" (P.160) is set to ON and you can check the notification history.

Open/Close the notification

･

Tap to open the notification to fully display the content or the operation menu.

･

Some notifications may not be displayed or opened by tapping.

Operation menu

･

The operation menu such as "CALL BACK" or "REPLY" may be displayed when a notification is opened.

･

For some notifications, operations such as replying a message of +Message may be available by tapping the item of the operation menu on the Notification panel.

Clear all

･

It appears when there are any notifications that can be cleared to clear all notifications. However, some notifications may not be cleared.

❖

Information

･

The control panel for Music etc. may be displayed below the quick setting tools depending on operation condition and you can play/pause a song, switch the audio output, etc. with it.

･

To hide the floating icon (bubble), touch and hold the floating icon (bubble)

Drag it to at the bottom of the screen.

little

･

To close the Notification panel, tap or drag the Notification panel up.

･

Even when the notification icon is not displayed on the status bar, the notification etc. indicating the terminal status may be displayed.

･

You can also check the notification by swiping (flicking) down the lock screen to open the Notification panel (New notifications arrived after the screen lock is set and some notifications can be displayed without any operation). You can also set to hide notifications on the lock screen in "Notifications on lockscreen" (P.160) or display them all the time in "Keep notifications" (P.161).

Drag it to any direction a

Basic operations

Page 68

Quick settings panel

Set ON/OFF etc. of each function.

Drag the status bar down with two

fingers.

Brightness level

･

Adjust the screen brightness.

Quick setting tools

･

Touch and hold it to display the setting screen, etc. depending on function.

･

When the indicator of the number of pages and the current page position appears below the quick setting tools, swipe (flick) the quick setting tools left or right to switch the page.

Wi-Fi Bluetooth Auto-rotate

Airplane mode

Set ON/OFF of Wi-Fi function. Set ON/OFF of Bluetooth function. Set whether to switch portrait/

landscape view automatically according to the terminal orientation.

Enable/disable Airplane mode.

e f

Silent mode (XXXX)

Location Nearby Share

Flashlight STAMINA mode Hotspot

Set silent mode.

Enable/disable location information. Share a file with nearby compatible

device. Set ON/OFF of the flash/photo light. Enable/disable STAMINA mode. Set ON/OFF of portable hotspot

function.

Screen Record

Record the currently displayed screen (P.54).

* In "XXXX", the silent mode type appears.

Edit

･

Display the edit screen to add, delete or rearrange the quick setting tools.

･

In the edit screen, u[Reset] to restore to the default.

Name of network operator

Settings

･

Display the setting menu (P.145).

Multiple users

･

When the icon is not displayed, turn "Multiple users" (P.182) to ON.

･

You can switch the user of the terminal, add a user/guest, or remove the guest.

･

Tap [Advanced] to display "Multiple users" in the Settings menu (P.182).

Basic operations

Page 69

❖

Information

･

The quick setting tool may be automatically added depending on usage condition.

･

You can also open the Quick settings panel by dragging down the Notification panel or dragging down the status bar on the lock screen.

･

The control panel for Music etc. may be displayed below the quick setting tools depending on operation condition and you can play/pause a song, switch the audio output, etc. with it.

･

To close the Quick settings panel, drag it up.

Task manager

Display recently used applications as thumbnails to confirm, open, switch between, or close them.

･

Applications are displayed as thumbnails.

･

Swipe (flick) left or right to switch the thumbnails.

❖

Information

･

Tap a thumbnail to open or switch the application. However, depending on the displayed thumbnails, the application may not be opened.

･

Swipe (flick) a thumbnail up to clear the thumbnail and exit the application. Swipe (flick) the left end thumbnail rightuTap [CLEAR ALL] to clear all thumbnails.

･

When "App pinning" (P.170) is set to ON, tap the icon displayed in the upper part of thumbnail [GOT IT] to pin the screen so that you cannot use the other applications except the currently displayed one. To cancel pinning, follow the onscreen instructions.

･

Also, tap [Screenshot] to capture an image of the screen which is displayed as a thumbnail.

[Pin]

Basic operations

Page 70

Split screen

Split the screen to display and operate two applications at the same time.

･

Activate the applications to display beforehand.

･

Split screen may not be available depending on application.

･

Applications are displayed as thumbnails.

Tap an icon appeared in the top of

a thumbnailu[Split screen].

･

For applications which are not available for the split screen, "Split screen" does not appear.

Tap the application thumbnail to

display from the lower part of the screen.

･

If you select the application which is not available in the split screen, the confirmation screen for asking if you end Multi-window (Split screen) and activate the application appears.

･

If the application that you want to display is not displayed in a thumbnail, tap to activate the application. However, if you activate the application that is not available in the split screen, it is displayed in the normal screen.

❖

Information

･

The application windows of the split screen can be displayed up and down in the portrait view and left and right in the landscape view.

･

Drag of the split line displayed in the center of the split screen up or down (in the landscape view, left or right) to change the range of the application display.

･

To end the split screen, drag to the top end or bottom end of the screen (left end or right end for the landscape view).

･

When the home app is Xperia Home, touch and hold an application icon shortcut in the Home screen, or touch and hold an application icon in the Application screen and then tap [Split screen] or in the shortcut menu to activate the split screen.

Basic operations

Page 71

SuguApp

Set "SuguApp" which you can activate an application or operate the phone call instantly with intuitive handling just like shaking a smartphone.

From the Home screen, tap

[Settings]u[docomo service/

cloud]u[SuguApp].

･

When the explanation screen etc. appears, follow the onscreen instructions.

App 1

App 2

SuguApp Operation Deterrence

Suguden setting

❖

Information

･

In the following case, SuguApp does not work properly.

- When making or receiving an additional call during a call

- While lying down

Set an application to activate when the terminal is shaken once.

Set an application to activate when the terminal is shaken twice.

Set an application to restrict its activation by SuguApp function.

Set the phone operations (Answer, Disconnect, Call, Mute, Reject) only by motion or voice command (P.69).

- When you perform vigorous exercise such as running, going up and down stairs, etc.

･

By default, "d払い (d Barai)" app is set to "App 1".

･

SuguApp function is not available when the screen is OFF, while the lock screen is displayed, or during a call.

･

If you put the terminal into a bag or pocket when the screen is ON, an application may activate in rare cases because that is recognized as a motion performance.

･

When SuguApp function is available, the notification icon is displayed. You can also confirm notification detail from the Notification panel.

･

For details on SuguApp, refer to NTT DOCOMO website.

Suguden setting

Set "Suguden" which allows you to operate phone with the motion and the voice command.

From the Home screen,

[Settings]u[Calls]u[Suguden

setting].

･

Alternatively, operate from the Home screen, tap service/cloud]

[Settings]u[docomo

[SuguApp]u[Suguden

setting].

Answer

Answer calls by placing the terminal to your ear.

Basic operations

Page 72

Disconnect (Motion/ Voic e command)

Call

Mute, Reject

Disable Suguden during roaming

End a call by motion or voice command. When the "Motion" is ON, a call can be disconnected by placing the terminal horizontally with the screen faced down or by shaking the terminal twice during a call. When the "Voice command" is ON, calls can be disconnected by saying the disconnect keyword while talk ing and then detaching your ear from the terminal.

Make a call to the other party that is registered in advance by shaking the terminal once with the Home screen displayed and then placing it to your ear.

Mute the incoming ringtone or reject a call by placing the terminal horizontally with the screen faced down while a call is incoming, or shaking the terminal twice. You can select from "Mute", "Reject", or "Reject and send SMS".

Turn off Suguden function automatically overseas.

Notes on using Suguden

･

In the following case, Suguden does not work properly.

- When using speakerphone

- When using an earphone or headset

- When the terminal is connected to a

Bluetooth device which has calling function (Disconnect (Voice command), Call (Motion))

- When making or receiving an additional call

during a call

- While lying down

- When you perform vigorous exercise such

as running, going up and down stairs, etc.

- When the display is covered with a book

type smartphone case etc.

･

If you put the terminal into a bag or pocket while on the incoming screen, the call may be answered or rejected in rare cases because that is recognized as a motion performance.

･

The proximity sensor does not respond well to black objects. When answering a call, if you put the earpiece over your hair, the proximity sensor may have trouble working and may failure to answer a call. In this case, please put the earpiece directly on your ear. When disconnecting (Motion)/muting or rejecting a call, flipping over the terminal on a black desk, etc. may cause the operation (Disconnect (Motion)/Mute, Reject) to fail. In this case, instead of placing the terminal directly on the surface, flip over the terminal about 1 cm above the desk etc. to operate (Disconnect (Motion)/Mute, Reject).

Basic operations

Page 73

･

When the Suguden function is available, the notification icon appears. You can also confirm notification detail from the Notification panel.

･

For details on Suguden, refer to NTT DOCOMO website.

Functions of Suguden

●

Disconnect (Motion)

･

When the motion is performed, a call will be disconnected even in the following cases.

- When the other party puts the call on hold

- When the Answering Machine is running (playing the answering message/recording a message)

･

When disconnecting a call with Suguden motion, it may not react (disconnect) if the speed of motion for placing the terminal facing down is fast. In that case, try the motion slowly to react (disconnect).

･

When "Disconnect" is ON, a call may be disconnected if you shake the terminal strongly even just once during the call because the action is recognized as motion performance.

●

Disconnect (Voice command)

･

When the disconnect keyword is heard, a call will be disconnected even in the following cases.

- When the other party puts the call on hold

- When the Answering Machine is running (playing the answering message/recording a message)

･

While calling with Disconnect (Voice command) ON, other application using the mouthpiece/microphone or a voice recording application etc. using the voice sound during a call may not be available. To use those application during a call, turn off the both settings of Disconnect (Voice command) and then start calling.

･

When the Answering Machine is running (while playing the answering message/ recording a message), Disconnect (Voice command) function is not available. In the case that you answer a call while recording with the Answering Machine, Disconnect (Voice command) function is available.

･

For calls using "Jspeak", Disconnect (Voice command) function is not available.

Basic operations

Page 74

･

Although the voice command function of Suguden uses the voice recognition technology and the language processing technology, DOCOMO is not liable for any accuracy of those technologies.

･

The voice recognition may fail when the volume of voice is too small during a call or calling under a noisy environment, or depending on the way of utterance.

●

Dialing

A Suguden call can be made from the Home screen or the lock screen (only when "Screen lock" (P.170) is set to "Swipe").

●

Mute, Reject

When "Mute, Reject" is set to ON, the function set in "Mute, Reject" may be performed when you shake the terminal strongly even just once while a call is incoming because the action is recognized as motion performance.

●

Disable Suguden during roaming

Suguden is disabled automatically overseas by default setting. To use Suguden overseas, turn off "Disable Suguden during roaming" in Suguden setting.

One-handed mode

Reduce the screen so that you can easily operate the terminal with one-hand.

･

To activate one-handed mode with , set in advance from the Home screen, tap [Settings]u[Display]u[Advanced] [One-handed mode]u.

Double-tap .

❖

Information

･

Tap [Home button setting] at the top of the screen to display "One-handed mode" of the setting menu (P.163).

･

Drag which appears in the top of the reduced screen up or down to move the reduced screen vertically.

･

Tap / shown left/right of the reduced screen to make the reduced screen to left-aligned/rightaligned.

･

Drag shown in the top left of the reduced screen (right-aligned), or shown in the top right (leftaligned) diagonally to change the size of the reduced screen.

･

To end one-handed mode, tap outside of the reduced screen, or double-tap .

･

The one-handed mode may end automatically depending on operation condition, for example, when the screen turns off or the screen is switched to the landscape view, etc.

･

Alternatively, tap [One-handed mode] in the side sense menu (P.50).

Basic operations

Page 75

Searching information in the terminal and websites

Enter a word in the search box to search the information in the terminal or on the Internet.

From the Home screen, tap the

Google search widget.

Enter a keyword to search.

･

Character entry (P.56)

･

The search candidate list appears.

Tap the search suggestion or of

the software keyboard.

❖

Information

･

Alternatively, from the Home screen, tap [Google] [Google] to open the "Google" application.

･

When the search candidates include applications, the applications can be activated by selecting.

･

In the search result screen etc., tap [More]u[Settings] to set for search.

Using Google Voice Search

Enter a search key word by voice.

From the Home screen, tap on

the Google Search widget.

Speak a search key word to the

mouthpiece/microphone.

Basic operations

Page 76

Home screen

Switching the home app

You can switch the home app for the terminal to "docomo LIVE UX", "Xperia Home" or "Simple Home".

･

"docomo LIVE UX" (P.74)

･

"Xperia Home" (P.81)

･

"Simple Home" (P.84)

From the Home screen,

[Settings]u[Apps & notifications]

[Advanced].

[Default apps]u[Home app].

Tap any of [docomo LIVE UX]/

[Simple Home]/[Xperia Home].

･

When you select "Simple Home", confirm the content and tap [OK].

❖

Information

･

When the home app is switched, widgets or application icon shortcuts on the screen may not be displayed correctly depending on the home screen layout etc.

docomo LIVE UX

It is a home app that DOCOMO offers you. You can customize the home screen intuitively. For details on docomo LIVE UX, from the Home screen, tap Help, or refer to the following website. https://www.nttdocomo.co.jp/service/ live_ux/index.html (in Japanese only)

[Help] to see

Home screen

Page 77

Home screen layout

You can activate applications or use widgets in the Home screen. All of applications are stored in the Application screen and the application icon shortcuts are located in the Home screen.

･

Swipe (flick) the Home screen left or right to switch the pages.

･

When the application has a notification, a dot or number may appear on the upper right of the icon or folder.

d e

Widget

･

Activate the widget (Google Search).

･

If a shortcut menu appears when you touch and hold a widget, you can perform certain operations.

Machi-Chara

･

Tap to ask something you want to know through dialog.

h i

Application icon shortcuts

･

Tap to activate the application.

･

Touch and hold to display the shortcut menu from which you can perform specified operations or check the application information. When is displayed, touch and hold and then drag it to any location to add the shortcut of specified operation to the Home screen.

Indicator

･

This indicates the current display position of the Home page.

･

This is appeared when you swipe (flick) the Home screen left or right.

Dock

･

This is always displayed even when the Home screen page is switched.

Apps button

･

Display all of applications. You can also search applications or use Osusume Apps (P.79).

Customizing area

･

You can locate application icon shortcuts, widgets, folders, etc.

Fold er

･

It contains the multiple application icon shortcuts etc.

My Magazine

･

Display My Magazine (P.79).

❖

Information

･

If there is any notification which indicates update of application or pause of setup, or any application icon shortcut which is shown in gray in the Notification panel, download the application (P.94).

Home screen

Page 78

Managing the Home screen

Moving application icon shortcut etc.

In the Home screen, touch and

hold an application icon shortcut or widget you want to move.

Drag it to a desired position.

･

To move it to the next page, drag it to the end of the Home screen.

Adding an application icon shortcut

From the Home screen, .

Touch and hold an application icon

you want to add to the Home screen.

･

The shortcut menu appears.

[Add to Home screen].

･

To move an application icon shortcut to the next page in the Home screen, touch and hold and then drag it to the end of the screen.

･

It is also possible to add the multiple same application icon shortcuts.

Removing an application icon shortcut from the Home screen

In the Home screen, touch and

hold an application icon shortcut to remove.

･

The shortcut menu appears.

Drag it in any direction a little

Drag it to "Remove" in the upper part of the screen.

･

Although the application icon shortcut is removed from the Home screen, the application itself is not uninstalled.

･

When appears, drag it to .

Removing a widget etc.

In the Home screen, touch and

hold a widget or folder you want to remove.

Drag it to "Remove" in the upper

part of the screen.

Home screen

Page 79

Uninstalling an application

･

Before uninstalling, back up all of the related contents which you want to save including the data saved in the application.

･

Some applications cannot be uninstalled.

In the Home screen, touch and

hold an application icon shortcut you want to uninstall.

･

The shortcut menu appears.

･

To uninstall an application stored in a folder, tap the folder and then touch and hold the application icon shortcut.

Drag it in any direction a little

Drag it to in the upper part of the screen.

･

For applications that cannot be uninstalled, is not shown.

[OK].

･

When an application is uninstalled, the application icon is also deleted from the Application screen.

Renaming folder

In the Home screen, tap a folder.

Tap the folder name or [Edit

Name].

Enter a folder name.

･

When entry is finished, tap on the software keyboard.

Setting the Home screen

Touch and hold an area of the

Home screen where no icons etc.

are displayed

Notification dots

Add app icons to Home screen

Add home settings icon

Wallpapers

Machi-Chara

[Home settings].

You can turn on/off the dot which appears when an application has a notification (P.160).

Select whether to automatically add an application icon shortcut to the Home screen or add only the application icon to the Application screen when a new application is installed.

･

By default, a shortcut of application is added to the Home screen when it is installed.

Turn ON/ OFF in the Home screen.

You can change the wallpapers of the Home screen and the lock screen.

Set Machi-Chara ON/OFF, change of character, etc.

Home screen

Page 80

Osusume Apps settings

Display my daiz NOW

My Magazine

Get started

Help

Set the display of "Osusume Apps" contents in the Application screen.

Set the display of my daiz NOW which is located in the leftmost page of the Home screen.

Turn ON/OFF of flick-up activation of My Magazine.

Check the tutorial of the Home screen.

Check how to use the Home screen in detail.

Application screen

It is appeared when is tapped in the Home screen. In the Application screen, you can find applications sorted in the order of use or installation, or search them by application name. Also, you can check the selected applications which are recommended to you now.

･

Application screen (P.89)

Search apps bar

･

Tap to enter characters to search applications.

Osusume Apps

･

Up to 4 selected applications or services from Osusume Apps are displayed.

All apps

･

All applications installed to the terminal are displayed. Tap to activate the application.

More apps

･

Display the Osusume Apps screen (P.79).

Home screen

Page 81

Pull-down menu

･

You can sort all the applications in the Application screen by "Recent", "Name" or "Installed".

Using Osusume Apps

Applications or services are recommended according to your usage condition.

From the Home screen, .

[Osusume Apps].

･

When using it for the first time, the confirmation screen for use appears. Tap [ENABLE] to display the explanation screen. In the explanation screen, tap

おすすめアプリ一覧へ

[ Apps list)] to display the Osusume Apps screen and enable the notifications from Osusume Apps.

Select an application or service.

･

A screen for introducing the application or a service page appears.

❖

Information

･

In the Osusume Apps screen, uTap / of each setting to switch it to ON/OFF.

･

When you have agreed the terms of use of Osusume Apps, tap on the Home screen to display the selection content of Osusume Apps. To display the Osusume Apps screen, tap [See More].

(To Osusume

マイマガジン

(My Magazine)

My Magazine is a search service to view articles from categories you selected. With tendency of articles you read and your profile information, the more you use, the more it comes close to your preference. Also, you can set to enable notifications, or use customization of My Magazine by using location information, your docomo service subscriptions, etc.

Viewing articles

From the Home screen, .

･

If the screen for startup of My Magazine appears, follow the onscreen instructions.

･

The list screen of articles per category is displayed.

･

Alternatively, swipe (flick) the Home screen up to open the list of articles per category.

･

Swipe (flick) left or right to switch categories.

Tap an article you want to read.

･

You can change the settings of My Magazine or check the help by tapping

･

Tap to refresh the information.

Home screen

Page 82

Setting the display category

From the Home screen, .

u[表示ジャンル設定

category setting)].

･

Marked categories will be displayed on My Magazine.

･

Tap at the upper right of the screen to sort the categories.

(Display

my daiz NOW

my daiz NOW is a service which delivers convenient information according to your preference or behavior. You can readily check information which is convenient for daily life such as weather, traffic, or gourmet.

Displaying my daiz NOW

In the leftmost page of the Home

screen, swipe (flick) right.

･

Swipe (flick) up or down to switch cards to be displayed.

･

Swipe (flick) left to return to the Home screen.

･

If the confirmation screen for use appears, tap [my daiz

try "my daiz")] and follow the onscreen instructions.

Tap a card you want to read.

･

Tap a card to view the detail information.

･

Tap my daiz (character) appeared in the upper left of screen to ask something you want to know through dialog.

を使ってみる

(I'll

Home screen

Page 83

Setting the display

Set to show/hide my daiz NOW.

Touch and hold an area of the

Home screen where no icons etc. are displayed

Tap of "Display my daiz NOW".

･

my daiz NOW disappears.

･

To display it again, tap of "Display

[Home settings].

my daiz NOW".

Home app information

You can check the version information etc. of docomo LIVE UX.

From the Home screen,

[About].

･

If the update of docomo LIVE UX is available, "Update now" is displayed in the application information screen. Tap it to update docomo LIVE UX.

Xperia Home screen

This section describes the Home screen displayed when the home app is set to "Xperia Home".

Widget : Clock widget

Machi-chara

･

Tap to ask something you want to know through dialog.

Fold er

･

It contains the multiple application icon shortcuts etc.

Dock

･

Locate application icon shortcuts or folders. They are always displayed even if the page of the Home screen is switched.

Widget : Google Search

Wallpaper

Home screen

Page 84

Application icon shortcuts

･

Touch and hold to display the shortcut menu where you can perform specified operations or check the application information. When is displayed, touch and hold and then drag it to any location to add a shortcut of specified operation to the Home screen.

❖

Information

･

Swipe (flick) the Home screen up to open the Application screen.

･

In the Home screen, swipe (flick) the part above the dock left or right to switch the pages and the indicator of the current location appears above the dock.

･

Touch and hold an application icon shortcut etc. and drag it to the left end/right end of the screen to move to the next page. Also, drag the rightmost page to the right end of the screen to add a home screen page.

･

You can add widgets, change the wallpaper, etc. by touching and holding an area of the Home screen where no icons, etc. are displayed.

･

Swipe (flick) the Home screen down to open the Notification panel.

･

A dot or number may appear on the application icon shortcut or folder when the application has a notification.

Adding folders on the Home screen

You can store application icon shortcuts etc. added to the Home screen to a folder to organize them.

From the Home screen, touch and

hold an icon

Drag it over another

icon.

❖

Information

･

To store an icon into a folder, touch and hold an icon in the Home screen

･

To rename a folder, tap a folderuTap the folder name or [Edit Name].

･

To delete a folder, touch and hold the folder in the Home screen the upper part of the screen. The application icon shortcuts etc. in the folder are also deleted.

Drag it over a folder.

Drag it to "Remove" which appears in

Adding a widget to the Home screen

Widget is an application which can be added to the Home screen to use. Use a widget to start an application easily.

Touch and hold an area of the

Home screen where no icons, etc. are displayed.

Home screen

Page 85

[Widgets]uTouch and hold a

widget to add.

･

When the Home screen appears, drag it to anywhere.

･

If the settings screen etc. appears, follow the onscreen instructions.

❖

Information

･

If a frame is displayed when a widget added to the Home screen is touched and held, you can drag the frame to resize the widget.

･

To remove a widget, in the Home screen, touch and hold the widget part of the screen.

Drag it to "Remove" in the upper

Changing wallpaper

You can change the wallpaper of the Home screen and the lock screen.

Touch and hold an area of the

Home screen where no icons, etc. are displayed.

[Wallpapers].

Tap an image to set as wallpaper.

･

When you tap [My photos] at the left end of the screen, select an image and then follow the onscreen instructions.

Follow the onscreen instructions

to set wallpaper.

Setting Home screen

Touch and hold an area of the

Home screen where no icons, etc. are displayed.

[Home settings].

Show Google™ App

Notification dots Add app icons to

Home screen

Allow Home screen rotation

Show quick search box

Set whether to display the "Google" app screen in the Home screen. Swipe (flick) the first page right to display it.

P. 1 6 0 Set whether to add an application

icon shortcut in the Home screen when the application is installed.

Set whether to allow the Home screen or the Application screen to rotate.

Set whether to display the Google Search widget in the Home screen.

Home screen

Page 86

Simple Home screen

This section describes the Home screen displayed when the home app is set to "Simple Home". Set Simple Home to use the home screen and the setting menu that are limited to the basic functions.

From the Home screen,

[Settings]u[Apps & notifications]

[Advanced].

[Default apps]u[Home app]

[Simple Home].

[OK].

･

To not change the font size, unmark "Set font size to Largest".

■

Applications on Simple Home

Machi-chara

･

Tap to ask something you want to know through dialog.

Application icon

･

Tap to activate an application.

Google Search

Apps

･

Applications that are not displayed in the Simple Home screen are displayed in a list.

Speed dial

･

Use the speed dial (P.85).

❖

Information

･

To change to the standard Home screen, from the Simple Home screen, tap [Settings]

Home]

[OK]u[docomo LIVE UX]/[Xperia Home].

･

A dot or number may appear on the application icon, folder, etc. when there is a notification from the application.

[Exit Simple

Home screen

Page 87

Using Speed dial

Saving contacts

On the Simple Home screen, tap

any of [Speed dial 1]/[Speed dial 2] /[Speed dial 3]

Select a contact to save.

･

Display of "Speed dial 1"/"Speed dial 2"/ "Speed dial 3" changes to the name in the registered contact.

❖

Information

･

To change/delete/edit contact saved in the speed dial, from the Simple Home screen, select the speed dialu[MENU]uTap any of [Edit entry]/[Delete entry]/ [Edit contact].

[OK].

Making a call

On the Simple Home screen, select

the speed dial

･

Operation during a call (P.99)

[Call].

Sending a message of +Message/ email

On the Simple Home screen, select

the speed dial [Send email].

･

How to send a message via +Message (P.111)

･

How to send Gmail (P.115)

[Send message]/

Home screen

Page 88

Using Settings

On the Simple Home screen,

[Settings].

Phone number

Display Brightness

Adaptive brightness

Auto-r otate screen

Font size Sleep

Screen lock

Your own phone number is displayed.

Adjust the screen brightness.

Adjust the screen brightness automatically according to the ambient brightness, etc. with reference to the brightness set in "Brightness".

Set whether to switch portrait/landscape view automatically according to the terminal orientation.

Set font size. Set a time for turning off

of screen. Set screen lock unlocking

method or fingerprint.

Sound Silent/Vibrate

mode Ringtone Vibrate on

touch

Tou ch s oun ds

Vibrate when ringing

Customize Home More settings

Exit Simple Home

Set silent mode.

Set ringtone. Set whether to vibrate the

terminal when the key icon is tapped.

Set whether to emit sound when selecting menu etc.

Set whether to vibrate the terminal while receiving a call.

P. 8 7 Display the setting menu

on the standard Home screen (P.145).

Change to the standard Home screen.

Home screen

Page 89

Changing applications on the Simple Home screen

On the Simple Home screen,

[Settings]

[Change apps]/[Reorder apps].

Select the applicationuSelect the

application to newly display/select the location to move to.

･

[OK].

❖

Information

･

In Step 2, tap [Reset]u[OK] to restore the defaults. Note that contacts registered to the speed dials cannot be reset.

[Customize Home].

When "Change apps" is selected, "Settings" and "Apps" cannot be changed.

Application screen

When the home app is set to "Xperia Home", all applications are displayed in the Application screen.

･

Switching Home app (P.74)

Swipe (flick) the Home screen up.

Search bar

･

Search applications.

Application icon list

･

Touch and hold an application icon to display the shortcut menu where you can perform specified operations or check the application information. When is displayed, touch and hold and then drag it to any location to add a shortcut of specified operation to the Home screen.

･

Set the order of application icons, or edit the Application screen.

Machi-chara

･

Tap to ask something you want to know through dialog.

Home screen

Page 90

❖

Information

･

A dot or number may appear on the application icon or folder when there is a notification from the application.

Adding an application to the Home screen

Add shortcuts of application to the Home screen.

In the Application screen, touch

and hold an application icon.

･

The shortcut menu appears.

･

To add applications from a folder, tap the folder and then touch and hold an application icon.

Drag it a little in any direction.

･

When the Home screen appears, drag it to anywhere.

❖

Information

･

Touch and hold the folder in the Application screen to add the folder with the application icon shortcuts to the Home screen.

･

To remove an application icon shortcut, touch and hold the application icon shortcut in the Home screenuDrag it a little in any directionuDrag it to "Remove" in the upper part of the screen. When "Uninstall" appears in the upper part of the screen, drag it to "Uninstall" to uninstall the application.

Uninstalling an application

･

Before uninstalling application, back up contents related to the application that you want to save including data saved in the application.

･

Some applications may not be uninstalled.

In the Application screen, touch

and hold the icon of application you want to uninstall.

･

The shortcut menu appears.

･

To uninstall applications in a folder, tap the folder and then touch and hold an application icon.

[App info].

･

The application information screen appears.

･

If "App info" is not displayed, tap .

[UNINSTALL].

･

For applications that cannot be uninstalled, "UNINSTALL" is not shown. When "DISABLE" is displayed, you can disable the application (P.159).

[OK].

Home screen

Page 91

Editing the Application screen

When the order of application icons is set to "Own order" in the menu (P.87), you can rearrange the application icons as you like, or organize them by storing them to folders.

In the Application screen,

[Rearrange].

･

The rearrange screen appears.

Touch and hold an application

icon.

Drag it to a desired location.

･

Drag it over a folder to store an application icon to the folder.

･

Drag it over another application icon to add a folder.

❖

Information

･

To close the rearrange screen, u[Exit], or tap .

･

To take out an application icon from a folder, tap the

folder

Touch and hold the application iconuDrag it

to a place you want to locate.

･

To rename a folder, tap a folderuTap the folder name or [Ed it Name]. You c an also rena me a folder w ith the same operation in the Application screen.

Application list

Preinstalled applications are as follows. The descriptions when the home app is set to "docomo LIVE UX" are explained here.

･

For usage of some applications, separate subscription (Charged) is required.

･

For some applications, you can check functions or operation steps from the help.

･

Design of application icon may vary depending on the home app or usage condition.

･

Preinstalled applications or layout of applications may differ depending on the initial setting condition etc.

Assistant

Activate Google Assistant.

Anshin Security

An application which allows you to use the security measurement against virus, unsafe sites or Wi-Fi, nuisance calls, etc.

遠隔サポート

An application for using " (Anshin Enkaku Support)". "

ト

(Anshin Enkaku Support)" is a service that allows staff of the Call center to support the terminal operations by remote-checking the

display of your terminal.

(Enkaku support)

あんしん遠隔サポート

あんしん遠隔サポー

→

P. 2 1 4

Home screen

Page 92

Osaifu-Keitai

An application that allows you to check your Osaifu-Keitai compatible services in a list. You can register recommended services or check balance of each service you have registered or

→

P. 1 3 2

points.

Osusume Apps

An application that allows you to check or install applications or services that DOCOMO recommends according to your usage

→

condition.

P. 7 9

Camera

Shoot photos or videos.→P. 1 2 1

Calendar

Disaster Kit

An application for using Disaster Message Board, Disaster Voice Messaging Service and Early Warning "Area Mail" (P.116).

Schedule

An application for creating/managing schedule whose data is shared with Memo application.

→

P.139

Sheets

Create, edit and share spreadsheets, as well as view, edit and save Excel files.

Slides

Create, edit and share slide show presentations, as well as view, edit and save PowerPoint files.

Settings

Configure settings for the terminal.→P.145

地図アプリ

(Map application)

An application which supports your outings totally according to multiple means of transportation as a car, walk, train. To use a part of features such as navigation, subscription to the charged service is separately required.

Data Copy

An application that allows you to transfer data when changing model, back up to/restore from

→

a microSD card.

データ保管

P. 1 4 3

BOX (Data Storage BOX)

An application for using Data Storage BOX. Data Storage BOX is a service which allows you to upload files to easily manage them in the cloud.

Calculator

Perform basic arithmetic operations and other various calculations.

Phone

An application which allows you to use call or check call history, or make the various settings.

→

P. 9 5

Docs

Create, edit and share documents, as well as view, edit and save Word files.

Clock

Use alarm, world clock, timer, stopwatch or

→

bedtime.

P.141

Home screen

Page 93

docomo phonebook

It is a phonebook application provided by DOCOMO. You can manage phonebook data

→

of your docomo account in the cloud.

P. 1 0 4

docomo mail

Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Your d ACCOUNT allows you to use the same email address to send, receive, and view email on several devices, such as tablets and

→

computers.

P. 1 0 9

Drive

View/manage/share files stored in Google Drive.

Instruction Manual

Display the terminal instruction manual. You can directly call up functions from the explanation (in Japanese only). * See "About manuals" in "Introduction".

News

Read a collection of the latest news and topics of interest.

Jspeak

An application for translating spoken words into the listener's native language. Use Face-to face translation/Phone translation/Image translation/Common phrase to enjoy communication with the other party who speaks different language.

Photos

You can playback photos or videos. You can back them up to your Google account.

マイマガジン

(My Magazine)

My Magazine is a safe and secure news application that allows you to check new information and have surprises free of cost

→

every day.

P. 7 9

マクドナルド

(McDonald's)

An official application of McDonald's. You can search nearby McDonald's with the shop search function, or obtain good value coupons that can be used in the shop or the latest information. You can save or use the points in a single operation if you log in with your d ACCOUNT etc.

Maps

Use Google Maps services, such as viewing the current location, finding another location and

→

searching the routes.

P. 1 3 8

Music

Play music.→P. 1 3 6

Memo

An application for creating/managing memos whose data is shared with Schedule application.

Amazon Shopping

An official application of Amazon which allows you to conveniently shop with good prices in Amazon online.

→

P. 1 2 9

Home screen

Page 94

Chrome

Browse web pages in Chrome.→P. 1 1 7

d払い(d Barai)

An application for use "d払い (d Barai)", the payment service provided by DOCOMO. You

can do your shopping simply, convenient and with good bargain just by showing a barcode displayed on the application in the target stores.

dphoto

A service for backing up photos or videos up to 5GB to cloud free of charge, then accessing the backup data from smartphones, tablets or PCs. Also, there is a service option that creates a photobook using the photos in the cloud or the terminal ( To use, separate subscription to the charged service is required).

ポイント

(d POINT)

An application that allows you to check, accumulate, and use your d POINT.

dmarket

dmarket provides a variety of services, offering digital content, such as music, videos, and books, and giving you access to a shopping site, travel booking site, and other e-commerce

→

P. 1 3 0

sites.

メニュー

(dmenu)

An application shortcut for "dmenu". In dmenu, you can easily access sites recommended by DOCOMO, as well as convenient applications.

→

P. 1 3 0

dcard

An application for checking usage details of d card, saved d points, entries of good value information easily. Also, you can set up "iD" offered by DOCOMO.

Disney DX

Disney DX is an application to enjoy much of the Disney's official streaming service "Disney Plus" with a lot of exclusive movies and limited privileges.

Duo

An application that allows you to make video calls.

Facebook

Facebook allows you to build closer relationships with your friends, family, colleagues, or classmates and to know what is going on in the world.

Files

You can search data such as still images, videos,

→

music, or downloaded files.

P. 1 8 4

FM radio

You can listen to FM radio. * To use FM radio, connect a headset (optional)

to the Headset jack.

Gmail

You can use the email services provided by Google and major Internet service providers.

→

P. 1 1 5

Home screen

Page 95

Google

Search information in the terminal and

→

websites by keywords.

P. 7 3

Google One

An application to use Google One services such as managing storage plan, auto backup of data, using various offers.

Google Pay

An application for managing electronic money or point cards collectively.

Google Movies & TV

Rent or purchase movies, etc. from Google Play.

アプリ

(iD application)

An application for using "iD", electronic money offered by DOCOMO. Once you have set up "iD" on your Osaifu-Keitai, you can hover the terminal over an IC card reader at various shops to make your shopping easier and more

→

comfortable.

P. 1 3 5

Kindle

An e-books reader application for reading books purchased on Amazon.

An SNS application with a lot of features which supports your business.

my daiz

It is a service with which you can search information readily just by speak to the terminal or receive necessary information at an optimum timing. In addition to weather forecast or transfer route search, you can add useful tie-up services such as a recipe search, home delivery, etc.

My docomo

You can check your data usage, usage fee, d points, etc. or establish various procedures or applications online.

Play Store

Download or purchase various applications,

→

games, etc. from Google Play.

P.131

Podcasts

You can register your favorite programs and play them, or search featured programs.

PS App

An application that allows you to check the latest information about games in PlayStation

Store or exchange information

among the game players.

Reader by Sony

An application that allows you to read e-books purchased in Sony's eBooks store "Reader Store".

Video & TV SideView

Play videos. In addition, view the TV program guide or use your terminal as a remote for Sony televisions or other devices.

Home screen

Page 96

ガイド

Xperia

Display Xperia

(Xperia guide)

使いこなしガイド

(Xperia use guide) to read explanation of the functions or check how to use them.

カバー

Xperia

(Xperia cover)

You can check the product information of dedicated cover or purchase the favorite cover at Xperia

カバーストア

(Xperia cover store).

Xperia Lounge Japan

An application which introduces Sony products or campaign information.

Xperia Transfer 2

You can transfer photos, videos, contacts, etc. from your smartphone (including iPhone) to Xperia.

YouTube

Play YouTube videos.

YT Music

You can playback music or music videos with YouTube Music.

+Message

You can send/receive text message to/from a mobile phone number as a recipient. You can also send images, videos, stamps, etc. other

→

than texts.

P.109

*1 Appeared when the home app other than

docomo LIVE UX is set.

❖

Information

･

When there is a notification which indicates update of application or pause of setup is displayed in the Notification panel, or there is any application icon which is shown in gray, downloading of the application is not complete. You can download in the following procedures.

- Connect Wi-Fi (downloading starts automatically)

- Drag the status bar down which indicates update of application onscreen instructions to configure Wi-Fi, etc.

- When you download via mobile network, drag down the status bar indicates pause of setup (P.65)

- To download the application via mobile network individually, tap the application icon displayed in

gray

Follow the onscreen instructions.

･

Some preinstalled applications can be uninstalled. Or, some uninstalled applications may be downloaded from "Play Store" (P.131) etc. again.

･

Some applications may require downloading and installation.

･

If you activate multiple applications, the available time may become short due to increase of battery consumption. You are recommended to exit the applications which are not in use using the task manager (P.67).

Open a notification

Follow the

Open the notification which

Tap [U SE DATA] .

Home screen

Page 97

Phone/Phonebook

Making/Receiving a call

Making a call

From the Home screen,

Enter a phone numberu.

･

Tap to delete the number.

When the call is finished, .

❖

Information

･

In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in the call history.

･

In Step 2, when a phone number is entered, the menu appears in the upper screen and you can create a new contact or send a message. When a contact matching to the entered phone number appears, you can make a call by tapping it.

･

With VoLTE, you can make high-quality voice call. To use VoLTE, both parties must meet the following requirements.

- Both terminals support VoLTE

- Within the area where VoLTE is available

- "Preferred network type" of Mobile network setting (P.192) is set to "4G/3G/GSM" or "4G/3G", and "4G Calling" (P.193) is also set to ON.

･

In DOCOMO LTE service area, when "4G Calling" is OFF, data communication is also 3G.

･

Voice communication and data communication may not change to LTE from 3G right after change of "4G Calling" to ON from OFF.

Emergency call

Emergency call Phone

Police call Fire and emergency rescue

Coast guard

❖

Note

･

This terminal supports "Emergency call location information". If you use the terminal to place a call to 110, 119, or 118, the emergency numbers, the information of a location where you are calling from (location information) is automatically notified to the Emergency call acceptance organization such as the Police Station. However, the Emergency call acceptance organization may not be able to figure out your exact location depending on the location where you place a call or radio wave condition. When you dial with "184" added or make a call with your caller ID hidden, your location information and phone number are not reported. However, when the Emergency call acceptance organization deems it necessary for lifesaving purposes, etc., they may decide to obtain your phone number and accurate location information from the GPS, regardless of your settings. Note that the areas/time for which the "Emergency call location information" is ready to be used vary depending on the preparatory state of each Emergency call acceptance organization.

number

110 119 118

Phone/Phonebook

Page 98

･

When calling 110, 119 or 118 from the terminal, tell that you are calling from a mobile phone, and give your phone number and your current location precisely for checking callback from the Emergency call acceptance organization such as police. Also, make a point to call in a stationary position to prevent the call from being dropped. Do not power off the terminal for at least 10 minutes after the emergency call just in case the Police or Fire/ Ambulance may have to get in contact with you.

･

Note that you may not connect to the local Fire Department or Police Station depending on where you are calling from.

❖

Information

･

If a nano UIM card is not inserted to the terminal, emergency calls (110, 119, 118) cannot be made in Japan.

･

You can make an emergency call by tapping [EMERGENCY] on the screen asking for entry of screen lock unlocking method.

･

When you make an emergency call with Call Blocking set to ON, the setting of the Call Blocking is disabled automatically so as to receive calls from the Emergency call acceptance organization. To enable Call Blocking, from the Home screen, tap

[Settings]u[Calls]u[Call Blocking] [RE-ENABLE NOW]. The setting of Call Blocking is kept disabled unless the operation is performed.

･

Emergency calls may not be available on some networks.

Entering pause (,)/(;) to send

For using services requiring entry of number during a call such as check of the balance of a bank account, reservation of tickets, etc., enter an additional number to a phone number beforehand and make a call.

■

Using 2-second pause (,)

Added number will automatically be sent approximately 2 seconds after a call is accepted.

From the Home screen,

Enter a phone number

2-sec pause] number

When the call is finished, .

■

Using a wait (;)

Enter an additional

Sending is automatically on standby when the call is made and a confirmation screen asking if you send the additional number appears.

From the Home screen,

Enter a phone number

3 4

wait]

Enter an additional number

On the confirmation screen, [YES].

When the call is finished, .

Phone/Phonebook

[Add

Page 99

Making an international call (WORLD CALL)

WORLD CALL is a service for making international calls, which is available from DOCOMO's mobile phones in Japan. For details on WORLD CALL, refer to NTT DOCOMO website.

From the Home screen,

Dial + (touch and hold [0])uEnter

Country code, Area code (City code), recipient number in the

order

When the call is finished, .

❖

Information

･

If the area c ode begins w ith "0", omit "0". Howev er, "0" may be required to dial to some countries/regions such as Italy.

Receiving a call

When a call comes in, the incoming call screen appears.

･

If the screen is on (except on the lock screen) or an application is running, the notification appears at the top of the screen (P.99).

Swipe (flick) up on the incoming

screen.

When the call is finished, .

■

Voice call incoming screen

a b

c d

Photo/image set in a contact Call icon

･

Swipe (flick) up to answer, or swipe (flick) down to

reject a call. Send a message (P.98) Name/phone number of the other party

Phone/Phonebook

Page 100

❖

Information

･

When "Answer" of "Suguden setting" (P.69) is ON, you can answer calls just by placing the terminal to your ear.

･

When "Disconnect (Motion/Voice command)" of "Suguden setting" (P.69) is ON, you can disconnect a call by the motion or voice command during a call.

Answering calls with Answering Machine

Even when Answering Machine is not set, you can activate Answering Machine manually.

On the incoming call screen, drag

the status bar down

[Answering

Machine].

❖

Information

･

When you have any recorded messages, and are displayed on the status bar. Drag the status bar downuTap the notification of the Answering Machine to display the Messages screen and you can check the recorded messages.

Muting the ringtone for an incoming call

While receiving a call, press the

volume key or the power key.

❖

Information

･

You can stop vibration by pressing the volume key or the power key when silent mode (Vibrate) is set.

･

To adjust t he volume of ringt one or listening v olume, press the volume up/down key with the Home screen, etc. displayed and then tap .

Declining a call

On the incoming call screen, swipe

(flick) .

Rejecting an incoming call and sending a message

If you are not available to answer a phone, you can decline the call and send a message. Messages for sending are pre-registered, and you can edit them if necessary.

On the incoming call screen, swipe

(flick) .

Tap a message to send.

･

Tap [Write new message] to create and send a message.

❖

Information

･

To edit a message beforehand, from the Home screen, tap with message]

[Settings]u[Calls]u[Reject call

Select a message and edit itu[OK].

Phone/Phonebook

Sony Xperia Ace II, SO-41B User guide

Specifications and Main Features

Frequently Asked Questions

User Manual

About manuals

Operation descriptions

Supplied accessories

Contents

Precautions

About using the terminal

Recommended features

Safety Precautions (Always follow these directions)

Handling precautions

Waterproofness/ Dustproofness

Before using the terminal

Part names and functions

nano UIM card

microSD card

Charging

FCC ID

Turning power on/off

Initial settings

Security codes for the terminal

Basic operations

Basic operations

Character entry

Notification LED

Screen display and the icons

Task manager

Split screen

SuguApp

One-handed mode

Searching information in the terminal and websites

Home screen

Switching the home app

docomo LIVE UX

Xperia Home screen

Simple Home screen

Application screen

Application list

Phone/Phonebook

Making/Receiving a call