Sony SLEH-00096 User Guide

Wireless Buzz!™ Buzzers

Instruction Manual

Before using this product, carefully read this manual and
retain it for future reference. These Wireless Buzz!™ Buzzers
are designed for use with the PlayStation®2 console and the
PlayStation®3 system.

Product Contents

• Four Wireless Buzz!™ Buzzers.

• Eight AA alkaline batteries.

• One USB receiver with receiver cap.

WARNING

To avoid potential electric shock or starting a fire, do not expose
this product to rain or moisture.

Precautions

Safety

This product has been designed with the highest concern for
safety. However, any electrical device, if used improperly, has
the potential for causing fire, electric shock or personal injury.
To ensure accident-free operation, be sure to follow these
guidelines:

• Observe all warnings, precautions and instructions.

• Do not use the product if it functions in an abnormal manner.

• This product contains small parts, which, if removed, may be
a choking hazard to children.

Use and Handling

• Do not expose the product to high temperatures, high
humidity or direct sunlight.

• Operate in an environment where temperatures range
between 5°C and 35°C.

• Do not allow liquid or small particles to get into the product.

• Do not put heavy objects on the product.

• Never disassemble or modify the product.

• Do not throw or drop the product, or physically damage it in
any way.

• Do not touch the product’s metal parts or insert foreign
objects into its USB connector.

Cleaning the Wireless Buzz!™ Buzzers

Dust may build up on the product after an extended period
of time.

• Before cleaning the product, disconnect it from the
PlayStation®2 console or the PlayStation®3 system
for safety.

GB

SLEH-000967016043

• Wipe the product’s surface with a soft, dry cloth.

• The product should be cleaned by an adult, or cleaned under
close adult supervision.

• Do not use a moistened cloth to clean the product as water
may cause it to malfunction.

• Do not use benzene, paint thinner or other chemicals as these
may damage the product.

• When using a commercially available cleaning cloth, follow
the instructions supplied with it.

AA Alkaline Batteries

• Do not throw the batteries into fire.

• Do not carry the batteries with coins or other metallic objects.
The batteries can generate heat if their positive and negative
terminals come into accidental contact with metallic objects.

• Do not mix new batteries with old ones.

• Do not use different types of battery together.

• When you are not going to use the product for a long time,
remove the batteries to avoid damage from battery leakage
and corrosion.

• If battery leakage occurs, wipe off any deposit and install new
batteries. If the deposit sticks to you, wipe it off thoroughly.

Connecting the Wireless Buzz!™ Buzzers

• Turn on the PlayStation®2 console or the PlayStation®3
system.

Wireless Buzz!™ Buzzers

Pairing the Wireless Buzz!™ Buzzers

These Wireless Buzz!™ Buzzers have already been paired with
the supplied USB receiver. To play with five to eight Wireless
Buzz!™ Buzzers, a second USB receiver is required.

battery cover

USB receiver

• Remove the receiver cap from
the USB receiver and insert its
USB connector into any USB
connector on the front of the
PlayStation®2 console or the
PlayStation®3 system.

• Before using a Buzz!™ Buzzer,
carefully remove its battery
cover and insert two AA
alkaline batteries (supplied).

• A Buzz!™ Buzzer will enter

sleep mode if left inactive for
a few minutes. To exit sleep
mode, press any button on the
Buzz!™ Buzzer.

• When a Buzz!™ Buzzer needs

new batteries, its red Buzz!™
button will flash rapidly and
then switch off.

To quickly check if a Buzz!™ Buzzer is paired with a USB receiver,
insert the USB receiver’s USB connector into any USB connector
on the front of the PlayStation®2 console or the PlayStation®3
system. Press any button on any Buzz!™ Buzzer: if the red LED
indicator on the USB receiver flashes once, the Buzz!™ Buzzer
and USB receiver are paired. If the red LED indicator on the USB
receiver does not flash, the Buzz!™ Buzzer and USB receiver are
not paired. When a Buzz!™ Buzzer is initially paired with a USB
receiver, its red Buzz!™ button will flash repeatedly.

Using the Wireless Buzz!™ Buzzers

When turned on, ensure that the Wireless Buzz!™ Buzzers are
within approximately 10 metres of the PlayStation®2 console or
the PlayStation®3 system. The usage and function of the product
may vary depending on the software in use. See the appropriate
software manual for details.

Troubleshooting

If you experience any difficulties while using the product, please
call the appropriate PlayStation® customer service number
which can be found:
– within every PlayStation®2 and PlayStation®3 format

software manual; and

– on our website at playstation.com

Next time you replace your batteries,
think about purchasing Sony
rechargeable batteries. Using one

Cycle Energy Blue

rechargeable battery is the equivalent

Save money and be environmentally conscious!
Visit us at: sony-europe.com/energy

of using 1000 disposable batteries.

Specifications

Interface (USB receiver and
PS2™/PS3™)

Interface (Buzz!™ Buzzer and
USB receiver)

USB connector (USB receiver
and PS2™/PS3™)

USB connector (Buzz!™ Buzzer
and USB receiver)

Power consumption (USB
receiver)

Power consumption (Buzz!™
Buzzer)

Buzz!™ Buzzer dimensions
(approx.)

USB receiver dimensions
(approx.)

Total weight (approx.) 315g (without AA

Operation temperature 0°C - 40°C

The manufacturer of this product is Logitech Technology
(Suzhou) Company Limited, located at No. 3 Songshan Road,
215129 Suzhou New District, China. Distributed in Europe by
Sony Computer Entertainment Europe Ltd, 10 Great Marlborough
Street, London, W1F 7LP.

waste in Europe. To ensure the correct waste treatment of the
product and batteries, please dispose of them in accordance
with any applicable local laws or requirements for disposal of
electrical equipment/batteries. In so doing, you will help to
conserve natural resources and improve standards of
environmental protection in treatment and disposal of electrical
waste. This symbol may be used on batteries in combination with
additional chemical symbols. The chemical symbols for mercury
(Hg) or lead (Pb) will appear if the battery contains more than

0.0005% mercury or more than 0.004% lead.

R&TTE Directive “Informal DoC” statement

Hereby, Sony Computer Entertainment Europe Ltd. declares
that the SLEH-00096 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/
EC. For details, please contact Sony Computer Entertainment
Europe Ltd Compliance Department, 10 Great Marlborough
Street, London, W1F 7LP, United Kingdom.

USB type 1.1

RF 2.4GHz, GFSK

USB type 1.1

RF 2.4GHz, GFSK

Max. 100mA @ 5V

Max. 13mA @ 3V

137 x 54 x 49mm

55 x 19 x 10mm

batteries)

Where you see either symbol on any of
our electrical products, batteries or
packaging, it indicates that the relevant
electrical product or battery should not
be disposed of as general household

Design and specifications are subject to change without notice.

©2010 Sony Computer Entertainment Europe. “Buzz!” and the Buzz! logo are trademarks of Sony Computer Entertainment Europe.

“2” and “PlayStation” are registered trademarks of Sony Computer Entertainment Inc. “ ” is a registered trademark of Sony Corporation. All rights reserved.