Sony SLD402S Datasheet

20W Array Laser Diode
Description
The SLD402S is a high power laser diode with an array structure, which achieves 20W high power.
Features
High power
Recommended optical power output: PO = 20W
Open package
Applications
Sold state laser excitation
Structure
GaAlAs quantum well structure laser diode
Operating Lifetime
MTTF 10,000H (effective value) at Po = 20W, Tc = 25°C
Absolute Maximum Ratings (Tc = 25°C)
Optical power output PO 22 W
Reverse voltage VRLD 2 V
– 1 –
SLD402S
PE94605A02-PS
Preliminary
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
M-S006
Warranty
This warranty period shall be 90 days after receipt of the product or 1,000 hours operation time whichever is shorter. Sony Quality Assurance Department shall analyze any product that fails during said warranty period, and if the analysis results show that the product failed due to material or manufacturing defects on the part of Sony, the product shall be replaced free of charge. Laser diodes naturally have differing lifetimes which follow a Weibull distribution. Special warranties are also available.
– 2 –
SLD402S
Optical and Electrical Characteristics (TC = 25°C)
Handling Precautions
Eye protection against laser beams
The optical output of laser diodes ranges from several mW to 3W. However the optical power density of the laser beam at the diode chip reaches 1MW/cm2. Unlike gas lasers, since laser diode beams are divergent, uncollimated laser diode beams are fairly safe at a laser diode. For observing laser beams, ALWAYS use safety goggles that block infrared rays. Usage of IR scopes, IR cameras and fluorescent plates is also recommended for monitoring laser beams safely.
In addition, the laser diode array of this product is not protected by window glass or other covering (open package product ), so special care is necessary when handling.
Safety goggles for protection from laser beam
IR fluorescent plate
Optical material
Laser diode
Optical board
Optical power output control device Temperature control device
Lens
Item
Symbol
Conditions
Min.
Typ. Max. Unit Ith Iop Vop
λP θ⊥ θ//
X, Yφ⊥φ//
ηD
Threshold current Operating current Operating voltage Wavelength
Radiation angle
Positional accuracy
Differential efficiency
PO = 20W PO = 20W PO = 20W PO = 20W PO = 20W
PO = 20W
PO = 20W
790
0.5
6
25
1.9
33
8
1.0
15 30
3.0
840
40 15
±300
±5 ±4
1.5
A A V
nm degree degree
µm degree degree
W/A
Perpendicular Parallel Position
Angle
Loading...
+ 1 hidden pages