Sony SDM-G96D, SDM-G76D, SDM-G206W User Manual

0 (0)

2-687-506-03(1)

の取り扱いかたを示しています。

のうえ

SDM-G76D

SDM-G96D

SDM-G206W

© 2006 Sony Corporation

VCCI

B

SDM-G76D/SDM-G96D

2 (JP)

Macintosh Apple Computer, Inc.

• WindowsMicrosoft Corporation

VESA DDCVideo Electronics Standards Association

Adobe Acrobat Adobe

Systems Incorporated

• ENERGY STAR

→ ™

http://www.sony.co.jp/

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 . . . . . . . . . . . . . . . . . . . . . . . 83 . . . . . . . . . . . . . . . . . . . . . . . . . 94 . . . . . . . . . . . . . . . . . . . . . . . . . 95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9. . . . . . . . . . . . . . . . . . . . . . . . 10

 

 

INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11. . . . . . . . . . . . . . . . . . . . . 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 RGB . . . . . . . . . . . 14 SDM-G206W . . . . . . . . . . . . . . 17

. . . . . . . . . . 17

. . . . . . . . . . 17

LANGUAGE . . . . . . . . . . . . . . 18

0 . . . . . . . . . . . . . . 18 . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

. . . . . . . . . . . . . . . . . . . . . 19

RGB . . . . . . . . . . . . . . . . . . . . . . . . . . 19

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

. . . . . . . . . . . . . . . . . . . . . . . . . . .

20

. . . . . . . . . . . . . . . . . . . . . . . . .

21

. . . . . . . . . . . . . . . . . . . . . . . . . .

23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

. . . . . . . . . . . . . . . . . . . . . . . . .

23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

3 (JP)

ください。

 

 

 

 

 

 

 

 

 

AC100V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

炎天下や夏場の窓を閉め切った自動車内はとくに高温に

4 (JP)

http://www.sony.co.jp/pcrecycle/

0570 000-369PHS 03 3447-9100

10 00 17 00

る場合は、http://www.sony.co.jp/SonyInfo/ pcrecycle/personal/kateikei.html

レイを廃棄する場合は、http://www.sony.co.jp/ SonyInfo/pcrecycle/business/jigyoukei.html

5 (JP)

ください。

1

A1 9 19

1 /

電源を入/

BMENU 11

5 DDC/CI3

Cm/M 11

DOK 11

/

E 11

FINPUT 10

6 (JP)

 

G

 

 

 

 

 

 

 

 

 

H 9

 

 

 

IINPUT1 DVI-D RGB

 

8

 

DVI Rev.1.0 RGB

 

JINPUT2 HD15 RGB

 

RGB 8

 

RGB 0.7 Vp-p

 

 

7 (JP)

Sony SDM-G96D, SDM-G76D, SDM-G206W User Manual

2

本機をお使いになる前に、下記のものがそろっていること

HD15-HD15 RGB

DVI-D RGB

CD-ROM Windows/Macintosh /

1

x

HD15DVI-D

x DVI RGB

DVI-D RGBDVI-D RGB

DVI-D

RGB

DVI

DVI-D

RGB

RGB

 

x HD15 RGB

HD15 RGBHD15-HD15 RGB

x VESA

VESAVESA

VESA

75mm SDM-G76D/ SDM-G96D

100mm SDM-G206W

HD15

RGB

HD15

RGB

HD15-HD15RGB

8 (JP)

 

3

 

5

 

 

 

 

1

 

1

 

4

SDM-G76D

11

• NO INPUT SIGNAL

• CABLE DISCONNECTED

• OUT OF RANGE

 

RGB

RGB

28 80 kHz

28 64 kHz

 

(SDM-G76D/SDM- (SDM-G76D/

 

G96D)

SDM-G96D)

 

28 81 kHz

28 66 kHz

 

(SDM-G206W)

(SDM-G206W)

 

 

56 75 Hz

60 Hz

 

(SDM-G76D/SDM- (SDM-G76D/

 

G96D)

SDM-G96D)

 

56 75 Hz

60 Hz

 

(<1680 × 1050)

(SDM-G206W)

 

56 60 Hz

 

 

(=1680 × 1050)

 

 

(SDM-G206W)

 

 

 

 

 

1280 ×1024

1280 ×1024

 

(SDM-G76D/SDM- (SDM-G76D/

 

G96D)

SDM-G96D)

 

1680 × 1050

1680 × 1050

 

(SDM-G206W)

(SDM-G206W)

 

 

 

21

9 (JP)

 

 

& DDC Windows

&

INPUT

 

 

 

&

INPUT

 

 

 

60 Hz

 

 

 

 

 

 

 

 

 

20°

 

 

5

 

 

1 DVI-D

INPUT1 DVI-D

 

 

RGB

 

2 HD15

INPUT2 HD15

 

 

RGB

10 (JP)

4

 

 

MENU

45

 

 

 

 

 

30

 

 

 

 

 

x MENU m/M OK

MENU

m/M OK

,

m/M OK OK

,

MOVIEtPCt tGAME

MOVIE1 MOVIE () PC

: M OV I E

: P C

,

:

5 0

: G A M E

5

m/M

11 (JP)

x

18

x

MENU 5

MENU 5

3

DDC-CI : ON

DDC-CI : OFF

DDC/CI Display Data Channel Command Interface

• GAME/

 

 

 

 

 

MOVIE/PC/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

M O V I E

 

 

 

 

 

 

 

:

1 0 0

 

 

 

 

 

6

 

6

:

7 0

 

 

 

 

 

:

5 0

 

 

 

 

 

 

 

 

 

 

1 2 8 0 x 1 0 2 4 / 6 0 H z

 

 

 

 

 

 

 

 

 

0

x

変更した設定は自動的にそれぞれのI N P U T 1/2

1 MENU

2m/M OK

3m/M MOVIE OK

MODE

M O D E

G A M E

M OV I E

P C

1 2 8 0 x 1 0 2 4 / 6 0 H z

4m/M OK

MOVIE

• GAME

• MOVIE

• PC

x ト輝度

1 MENU

2m/M OK

3m/M OK

4m/M OK

x

sRGB

1 MENU

2m/M OK

3m/M 6 OK

4m/M OK

12 (JP)

x

sRGB

1 MENU

2m/M OK

3m/M OK

4m/M OK

x

M O V I E

9 3 0 0 K

6 5 0 0 K

s R G B

1 2 8 0 x 1 0 2 4 / 6 0 H z

1 MENU

2m/M OK

3m/M OK

4m/M OK

9300K 6500K

「sRGB sRGBsRGBsRGBsRGB

sRGBsRGB

• sRGB

GAME/MOVIE/PC/

 

 

 

 

 

 

 

 

 

1 2 8

 

 

 

 

 

 

 

 

R

 

 

 

 

 

G

 

 

 

1 2 8

 

 

 

 

 

 

 

B

 

1 2 8

 

 

 

 

 

1 2 8 0 x 1 0 2 4 / 6 0 H z

1m/M OK

2m/M R Red B BlueOK m/MOK

G Green R B

G

3m/M OK

x

sRGB

M O V I E

123

4

1 2 8 0 x 1 0 2 4 / 6 0 H z

1 MENU

2m/M OK

3m/M OK

4m/M OK

x

1 MENU

13 (JP)

2m/M OK

3m/M OK

4m/M OK

x0

1 MENU

2m/M OK

3m/M 0 OK

4m/M OK

• OK

RGB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R E S O L U T I O N

• RESOLUTION

 

 

1 6 8 0 x 1 0 5 0 / 6 0 H z

 

 

 

 

SDM-G206W

INPUT1 DVI-D RGB

x

/19

1

/ /

「オート調整」や「フェーズ/ /

14 (JP)

x

1 MENU

2m/M OK

3m/M OK

4m/M OK

を、現在入力されている信号に最適な調整値に して、その調整値を記憶します。

5m/M OK

x

/ / /

HD15RGB

11,280 × 1,024 SDMG76D / SDM-G96D 1,680 × 1,050 SDMG206W

2CD-ROM

3CD-ROM

Windows

CD-ROM

UTILITY

4 [Adjust] [Next]

5 MENU

6m/M OK

7m/M OK

8m/M

 

 

9

OK

 

 

10 [Next]

11 m/M OK

12m/M

13 OK

14 [Next]

15 m/M OK

16 m/M

17 [Next] [End] [ ]

CD-ROM

1CD-ROMCD-ROM

2[Utility] [WINDOWS]

3[WIN_UTILITY.EXE]

4

Macintosh

1CD-ROM

2[Utility] [MAC]

3[MAC UTILITY] [MAC_CLASSIC_UTILITY]

[MAC_OSX_UTILITY]

4

15 (JP)

4 MENU

5m/M OK

6m/M OK

7m/M

8 OK

9m/M OK

10m/M

11 OK

12 m/M OK

13 m/M

14 [END]

x

RESOLUTION SDM-G206W

PC

1 MENU

2m/M OK

3m/M RESOLUTION OK

RESOLUTION

R E S O L U T I O N

1 6 8 0 x 1 0 5 0

1 4 0 0 x 1 0 5 0

1 6 8 0 x 1 0 5 0 / 6 0 H z

4m/M OK

16 (JP)

SDM-G206W

画像を信号のアスペクト比やオリジナルの解像度のまま

1 2 8 0 x 1 0 2 4 / 6 0 H z

1 MENU

2m/M OK

3m/M OK

かわらず、画像を画面いっぱいに表示し ます。

信号によっては、画面左右の端に黒い帯 が出ます。

1,680

×1,050

1,680 × 1,050

1 2 8 0 x 1 0 2 4 / 6 0 H z

1 MENU

2m/M OK

3m/M OK

3 3 3

1 2 8 0 x 1 0 2 4 / 6 0 H z

1 MENU

2m/M OK

3m/M OK

や、本体のINPUT19

INPUT

17 (JP)

LANGUAGE

L A N G UAG E

N E D E R L A N D S S V E N S K A

P y CC KИЙ

1 2 8 0 x 1 0 2 4 / 6 0 H z

1 MENU

2m/M OK

3m/M OK

English

Français

Deutsch

Español

Italiano

Nederlands

Svenska

0

OK

1 2 8 0 x 1 0 2 4 / 6 0 H z

1 MENU

2m/M 0 OK

3m/M OK

• OK

LANGUAGE

1 2 8 0 x 1 0 2 4 / 6 0 H z

1 MENU

2m/M OK

3m/M

1 MENU

MENU

18 (JP)

VESA NUTEK ENERGY STARDPMS (Display Power Management Standard)DMPM DVI Digital Monitor Power Management

SDM-G76D

 

 

1

 

45 W

*

1.0 W

**

 

 

1

1.0 W

SDM-G96D

 

 

 

 

 

 

 

1

 

 

 

48 W

*

1.0 W

**

 

 

1

1.0 W

SDM-G206W

 

 

 

 

 

 

 

1

 

 

 

70 W

 

 

*

1.0 W

**

 

 

1

1.0 W

* るため、アクティブオフ状態になる前に「No Input Signal5

**EPA Environmental Protection Agency

RGB

/

28 80 kHz (SDM-G76D/SDM-G96D)

28 81 kHz (SDM-G206W)56 75 Hz(SDM-G76D/SDM-G96D)

56 75 Hz (<1680 × 1050)

56 60 Hz (=1680 × 1050) (SDM-G206W)

15

1

19 (JP)

OUT OF RANGE

I NFORMA T I ON

OUT OF RANGE I NPUT 1 : DV I – D

x x x . x k H z / x x x H z

xxx.x kHz / xxx Hz

数字の部分に現在入力されている信号の水平/

RESOLUTION > 1280 ×1024

(SDM-G76D/SDM-G96D)

1,280 × 1,024

RESOLUTION > 1680 × 1050 (SDM-G206W)

1,680 × 1,050

NO INPUT SIGNAL

 

 

NO

I NPUT S I GNA L

I NPUT 1 : DV I – D

GO

TO POWER SAVE

 

 

 

 

 

 

 

 

 

 

CABLE DISCONNECTED

I NPUT 1 : DV I – D

GO TO POWER SAVE

GO TO POWER SAVE

45

GO TO POWER SAVE

5

20 (JP)

1 1 1

CABLE

• 8

 

DISCONNECTED

 

 

• 10

 

 

 

 

CABLE DISCONNECTED

 

 

NO INPUT SIGNAL • 8

 

 

 

1

• 10

 

 

x

 

 

 

 

 

 

 

 

 

• OS

 

 

 

 

 

 

 

 

 

 

 

 

OUT OF RANGE

x

 

 

 

 

 

 

 

 

 

 

28~80 kHz ( RGB), 28 64 kHz ( RGB)

 

 

(SDM-G76D/SDM-G96D)

 

 

28~81 kHz ( RGB), 28 66 kHz ( RGB) (SDM-G206W)

 

 

56~75 Hz ( RGB), 60 Hz ( RGB) (SDM-G76D/SDM-G96D

 

 

56~75 Hz (<1680 × 1050 RGB), 56 60 Hz (=1680 × 1050

 

 

RGB), 60 Hz ( RGB) (SDM-G206W)

 

 

1280 × 1024 (SDM-G76D/SDM-G96D), 1680x 1050 (SDM-G206W)

 

 

 

 

OS

 

 

 

 

 

 

 

Windows

 

 

Windows SONY

 

 

SDM-G76D/SDM-G96D/SDM-G206W

 

 

 

Macintosh • Macintosh Macintosh

 

 

 

• RGB 15

 

x

VESA Macintosh19

21 (JP)

 

 

 

 

 

• 12

 

 

• RGB 14

 

 

x

 

 

• SXGA 1280 × 1024 SDM-G76D/SDM-G96D

 

 

WSXGA+ 1680 × 1050 SDM-G206W

 

 

 

 

 

 

• 15

 

RGB

• 15

 

 

 

 

 

• (SDM-G206W )

 

 

x

 

 

• SXGA 1280 × 1024 SDM-G76D/SDM-G96D

 

 

WSXGA+ 1680 × 1050 SDM-G206W

 

 

 

 

 

• 13

 

 

• 12

 

 

 

 

• RGB 14

 

 

 

 

 

• RGB 14

 

 

• 13

 

 

 

 

 

• 18

 

 

 

 

x

 

 

 

 

 

 

 

 

 

 

 

 

• (SDM-G206W ) (16 )

 

 

 

 

 

• (SDM-G206W )

 

 

17

SDM-G76D/SDM-G96D/SDM-G206W

と名称

22 (JP)

3

b

切り後8

SDM-G76D/SDM-G96D/SDM-G206W

購入年月日

TEL.

TEL.

This display is designed for use in Japan only and cannot be used in any other country.

23 (JP)

SDM-G76D

 

SDM-G96D

 

LCD

a-Si TFT

LCD

a-Si TFT

 

17 43 cm

 

19 48 cm

 

 

 

RGB *

 

RGB *

 

28 80 kHz RGB

 

28 80 kHz RGB

 

28 64 kHz RGB

 

28 64 kHz RGB

 

56 75 Hz RGB

 

56 75 Hz RGB

 

60 Hz RGB

 

60 Hz RGB

1280

1280

 

 

 

1024

 

1024

RGB

RGB

 

0.7 Vp-p 75 Ω

 

0.7 Vp-p 75 Ω

 

 

 

 

 

TTL 2.2 kΩ

 

TTL 2.2 kΩ

 

/

 

/

 

RGB DVI

 

RGB DVI

 

TMDS Single link

 

TMDS Single link

 

 

 

 

 

AC100 240V/50-60 Hz

 

AC100 240V/50-60 Hz

 

1.0 A

 

1.0 A

 

5 35

 

5 35

/ /

/ /

 

 

 

 

 

383.5 × 404.5 × 163mm

 

422.5 × 435.5 × 163mm

 

5.1 kg

 

5.6 kg

& DDC2B

& DDC2B

 

8

 

8

*

• 4.8%0.8 μs

• 2.5 μs

• 450 μs

24 (JP)

SDM-G206W

LCD a-Si TFT 20.1 51cm

RGB *

28 81 kHz RGB 28 66 kHz RGB

56 75 Hz <1680 × 1050RGB

56 60 Hz =1680 × 1050RGB

60 Hz RGB

16801050

RGB

0.7 Vp-p 75 Ω

TTL 2.2 kΩ/

RGB DVI

TMDS Single link

AC100 240V/50-60 Hz 1.5 A

5 35/ /

485.5 × 410 × 178mm5.2 kg

& DDC2B

8

*

• 4.8%0.8 μs

• 2.5 μs

• 450 μs

25 (JP)

2-687-506-03(1)

TFT LCD Color

Computer Display

Operating Instructions

(GB)

 

 

 

SDM-G76D

SDM-G96D

SDM-G206W

© 2006 Sony Corporation

Owner’s Record

The model and serial numbers are located at the rear of the unit. Record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. Model No. Serial No.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Dangerously high voltages are present inside the unit. Do not open the cabinet. Refer servicing to qualified personnel only.

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

IMPORTANTE

Para prevenir cualquier mal funcionamiento y evitar daños, por favor, lea detalladamente este manual de instrucciones antes de conectar y operar este equipo.

If you have any questions about this product, you may call; Sony Customer Information Services Center 1-800-222-7669 or http://www.sony.com/

Declaration of Conformity

Trade Name:

SONY

Model:

SDM-G76D

 

SDM-G96D

 

SDM-G206W

Responsible Party:

Sony Electronics Inc.

Address:

16530 Via Esprillo,

 

San Diego, CA 92127 U.S.A.

Telephone Number:

858-942-2230

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTICE

This notice is applicable for USA/Canada only.

If shipped to USA/Canada, install only a UL LISTED/CSA LABELLED power supply cord meeting the following specifications:

SPECIFICATIONS

Plug Type

Nema-Plug 5-15p

Cord

Type SVT or SJT, minimum 3 × 18 AWG

Length

Maximum 15 feet

Rating

Minimum 7 A, 125 V

NOTICE

Cette notice s’applique aux Etats-Unis et au Canada uniquement.

Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser le cordon d’alimentation portant la mention UL LISTED/CSA LABELLED et remplissant les conditions suivantes: SPECIFICATIONS

Type de fiche

Fiche Nema 5-15 broches

Cordon

Type SVT ou SJT, minimum 3 × 18 AWG

Longueur

Maximum 15 pieds

Tension

Minimum 7 A, 125 V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

As an ENERGY STAR Partner, Sony Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

(SDM-G76D/SDM-G96D only)

2 (GB)

Table of Contents

Macintosh is a trademark licensed to Apple Computer, Inc., registered in the U.S.A. and other countries.

Windowsis registered trademarks of Microsoft Corporation in the United States and other countries.

VESA and DDCare trademarks of the Video Electronics Standards Association.

ENERGY STARis a U.S. registered mark.

Adobe and Acrobat are trademarks of Adobe Systems Incorporated.

All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies.

Furthermore, “™” and “→” are not mentioned in each case in this manual.

http://www.sony.net/

Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Step 1: Use the stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Step 2: Connect the display to your computer . . . . . . . . . . . . . . . . . 7 Step 3: Connect the power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Step 4: Secure the cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Step 5: Turn on the monitor and computer . . . . . . . . . . . . . . . . . . . 8 Adjusting the tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Selecting the input signal (INPUT button). . . . . . . . . . . . . . . . . . . . . 9

Customizing Your Monitor . . . . . . . . . . . . . . . . . . . . . . .10

Navigating the menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Setting the MODE (PICTURE MODE) . . . . . . . . . . . . . . . . . . . . . . 10 PICTURE menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 SCREEN menu (analog RGB signal only) . . . . . . . . . . . . . . . . 13 ZOOM menu (for SDM-G206W only) . . . . . . . . . . . . . . . . . . . . 15 MENU POSITION menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 INPUT SENSING menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 LANGUAGE menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 0 RESET menu (reset to the default setting) . . . . . . . . . . . . . . . . 17

MENU LOCK menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Technical Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Power saving function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Automatic picture quality adjustment function

(analog RGB signal only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

On-screen messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Trouble symptoms and remedies . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

3 (GB)

Precautions

Warning on power connections

Use the supplied power cord. If you use a different power cord, be sure that it is compatible with your local power supply.

For the customers in the U.S.A.

If you do not use the appropriate cord, this monitor will not conform to mandatory FCC standards.

For the customers in the UK

If you use the monitor in the UK, be sure to use the appropriate UK power cord.

Example of plug types

for 100 to 120 V AC for 200 to 240 V AC for 240 V AC only

The equipment should be installed near an easily accessible outlet.

Installation

Do not install or leave the monitor:

In places subject to extreme temperatures, for example near a radiator, heating vent, or in direct sunlight. Subjecting the monitor to extreme temperatures, such as in an automobile parked in direct sunlight or near a heating vent, could cause deformations of the casing or malfunctions.

In places subject to mechanical vibration or shock.

Near any equipment that generates a strong magnetic field, such as a TV or various other household appliances.

In places subject to inordinate amounts of dust, dirt, or sand, for example near an open window or an outdoor exit. If setting up temporarily in an outdoor environment, be sure to take adequate precautions against airborne dust and dirt. Otherwise irreparable malfunctions could occur.

Be careful not to touch the air vents on the upper rear of the display, since they become heated.

Place this unit on a flat surface. Do not place it on an uneven surface like the edge of a desk. If a part of this unit sticks out from such surface, it may fall or cause damaged and injury.

Ventilation

The openings of the top and bottom parts are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these openings must never be blocked or covered.

The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.

Handling the LCD screen

Do not leave the LCD screen facing the sun as it can damage the LCD screen. Take care when you place the monitor by a window.

Do not push on or scratch the LCD screen. Do not place a heavy object on the LCD screen. This may cause the screen to lose uniformity or cause LCD panel malfunctions.

If the monitor is used in a cold place, a residual image may appear on the screen. This is not a malfunction. The screen

returns to normal as the temperature rises to a normal operating level.

If a still picture is displayed for a long time, a residual image may appear for a while. The residual image will eventually disappear.

The LCD panel becomes warm during operation. This is not a malfunction.

Note on the LCD (Liquid Crystal Display)

Please note that the LCD screen is made with highprecision technology. However, black points or bright points of light (red, blue, or green) may appear constantly on the LCD screen, and irregular colored stripes or brightness may appear on the LCD screen. This is not malfunction.

(Effective dots: more than 99.99%)

Maintenance

Be sure to unplug the power cord from the power outlet before cleaning your monitor.

Clean the LCD screen with a soft cloth. If you use a glass cleaning liquid, do not use any type of cleaner containing an anti-static solution or similar additive as this may scratch the LCD screen’s coating.

Clean the cabinet, panel, and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine.

Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as a ballpoint pen or screwdriver. This type of contact may result in a scratched picture tube.

Note that material deterioration or LCD screen coating degradation may occur if the monitor is exposed to volatile solvents such as insecticide, or if prolonged contact is maintained with rubber or vinyl materials.

Note that if service personnel changes some parts during repair, these parts may be retained.

Transportation

Disconnect all cables from the monitor and grasp the monitor firmly with both hands when transporting. If you drop the monitor, you may be injured or the monitor may be damaged.

When you transport this monitor for repair or shipment, use the original carton and packing materials.

Installation on a wall or a mounting arm

If you intend to install the display on a wall or a mounting arm, be sure to consult qualified personnel.

Disposal of the monitor

Do not dispose of this monitor with general household waste.

The fluorescent tube used in this monitor contains mercury. Disposal of this monitor must be carried out in accordance to the regulations of your local sanitation authority.

For customers in the United States

This product contains mercury. Disposal of this product may be regulated if sold in the United States. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance (http://www.eiae.org).

4 (GB)

Identifying parts and controls

See the pages in parentheses for further details.

The 1 (power) switch and the control buttons are on the front right lower side of the monitor.

Front of the display

A1 (Power) switch and indicator (pages 8, 18)

To turn the display on or off, press the 1 (power) switch upward.

The power indicator lights up in green when the display is turned on, and lights up in orange when the monitor is in power saving mode.

Press to turn the display on or off.

BMENU button (page 10)

This button displays or closes the main menu. Pressing this button for 5 seconds displays the current

DDC/CI setting. Pressing the button for a further 3 seconds changes the setting.

Cm/M buttons (page 10)

These buttons function as the m/M buttons when selecting the menu items and making adjustments.

DOK button (page 10)

This button selects the item or executes the settings in the menu.

E (PICTURE MODE) button (page 10)

This button is used to adjust the PICTURE MODE.

FINPUT button (page 9)

This button switches the video input signal between INPUT1 and INPUT2 when two computers are connected to the monitor.

5 (GB)

Loading...
+ 361 hidden pages