User guide
Stereo Bluetooth® Headset
SBH24
Contents
Introduction...................................................................................3
Function overview.............................................................................3
Hardware overview...........................................................................3
Basics.............................................................................................5
Charging............................................................................................5
Turning on and o............................................................................ 5
Adjusting the volume....................................................................... 6
Wearing instruction.......................................................................... 6
Getting started..............................................................................8
Pairing your headset with an Android or iOS device.......................8
Performing a factory reset on your headset....................................8
Using your headset.......................................................................9
Using your headset for phone calls..................................................9
Using your headset to play music....................................................9
Using the Voice Assist function........................................................9
Using Multipoint mode................................................................... 10
Legal information.........................................................................11
Declaration of Conformity for SBH24.............................................. 12
2
Introduction
Function overview
Your SBH24 Stereo Bluetooth® Headset is designed to make life more convenient
when you're on the go. When paired with a compatible Android™ or iOS device,
you can use your headset to:
• Answer or reject incoming calls.
• Control music played on a paired Android or iOS device.
Hardware overview
1
Headphone jack Connect wired headphones to the 3.5 mm jack.
2
Microphone Make phone calls or activate Voice Assist.
3
Volume key Press to increase volume.
4
Volume key Press to decrease volume.
5
Multi-function key Short press to:
• Answer incoming calls or end an ongoing call.
• Play or pause the current track.
Long press for 1 second to:
• Reject incoming calls.
• Initiate Voice search with Assistant or Siri.
3
This is an Internet version of this publication. © Print only for private use.
• Mute the microphone during a call.
Long press for 7 seconds to:
• Enter pairing mode.
Quickly double-tap to:
• Skip to the next music track.
Quickly triple-tap to:
• Return to the previous music track.
6
NFC detection
Touch other devices to this area to use NFC.
area
7
Strap hole Attach a strap to your headset as an alternative instead of
using the clip.
8
LED indicator The LED colour indicates battery level:
• Green: 85% or more.
• Orange: 15% - 85%.
• Red: 15% or less.
The LED flash frequency indicates status:
• Slow flashes when your headset is connected or idle, or
during an active call.
• Quick flashes when your headset is being paired with
another device, or when a call is incoming.
9
Power key Slide up to power on.
Slide down to power o.
10
Charger/USB
Insert the USB Type-C cable to charge the battery.
Type-C™ cable
port
11
Clip Clip your headset to your shirt.
4
This is an Internet version of this publication. © Print only for private use.
Basics
Charging
Before using your headset for the first time, it is recommended to charge it with an
ocial Sony charger. The LED indicator turns green when the battery level is above
85%, and goes o when your headset is fully charged.
A drained headset needs to charge for approximately 1.5 hours to be fully charged. Battery
life while listening to music or handling calls is approximately 6 hours if the temperature is
25 °C (77 °F). Your headset has a capless USB port. The USB port must be completely dry
before a cable can be connected for charging.
To charge your headset
1 Connect the larger USB connector to the charger or the USB port of a
computer.
2 Connect the USB Type-C connector of the cable to your headset.
For the recommended charger, see
http://www.sonymobile.com/products/accessories/
Turning on and o
To turn on your headset
• Slide up. The LED indicator flashes quickly three times in green to indicate
that your headset is powered on.
To turn o your headset
• Slide
that your headset is powered o.
If your headset is turned on but left idle, it remains in pairing mode for 10 minutes. After 30
minutes, if your headset is not paired to an Android or iOS device, it turns o automatically.
down. The LED indicator flashes quickly three times in red to indicate
.
5
This is an Internet version of this publication. © Print only for private use.
Loading...