Sony RMT-D126A Service Manual

Controlling Your TV with the Supplied Re mote

By adjusting the remote signal , you can control your TV with the supplied remote.

Controlling TVs with the remote

Notes

• If you enter a new manufacturer’s co de , the co de

previously entered will be erased.

• When you replace the batteries of the remote, the

code you have set may be reset to the default setting. Set the appropriate code aga in.

Controlling the TV

By adjusting remote signal, you can control the sound level, input source, and power switch of your TV with the supplied remote.

TV [/1

C/X/x/c

1 Hold down TV [/1, and enter your TV’s

manufacturer’s code (see the table below) using C/X/x/c.

2 Release TV [/1.

Manufacturer’s codes of controllable TVs.

Manufacture Press

Sony (default) General Electric JVC Panasonic Philips Quasar RCA Samsung Sanyo Sears Sharp Toshiba Zenith

C/X/x/c

X X

X C

x X

c c

X c

c x

X C

x c

X x c C or X C

c x

c C

c X

to input code

TV [/1

TV/VIDEO VOL +/–

You can control your TV usi ng the bu tto ns below.

By pressing You can

TV [/1 Turn the TV on or off VOL (volume)

+/– TV/VIDEO Switch the TV’s input source

Adjust the volume of the TV

between the TV and ot her in put sources

Note

Depending on the units being connected, you may not be able to control your TV or to use some of the buttons.

Using Various Additional Functions