Sony PM0841 User Manual

Get to Know
Your Phone

SONY

®

XPERIA® Z4V

Setting Up Your Phone

Welcome to Verizon Wireless. You’re now
part of a growing movement that’s about
speed, signal and strength. This guide will
show you how to set up and use your phone,
access special features, and find help.

Charge the Phone

Before turning on your phone, charge it
fully.

1. Insert the small end of the USB cable

into the USB/Charger Port.

2. Insert the other end into the power

adapter, and then plug the power adapter
into an electrical outlet.

WARNING! Please use only an approved charging accessory
to charge your phone. Improper handling of the charging
port, as well as the use of an incompatible charger, may
cause damage to your device and void the warranty.

36%

36%

Optional: Insert the microSD Card

1. With the phone f acing down , open

the Me mory/SIM card slot cover. Usin g
a fing ernail, pu ll out the SIM ca rd and
memory card slot.

2. Carefully slide the micro SD card

into the memory card slot with t he gold
contacts facing up.

3. Push t he Memory/SIM card slot back

into place. Close t he Memor y/SIM card
slot cover.

NOTE: The microSD card is sold separately.

Optional: Replace the SIM Card

Your phone comes wit h the SIM card
already installed.

If you ne ed to replace the SIM card:

1. With the phone facing down, open the

Memory/SIM card slot cover. Using a
fingernail, pull out the Memory/SIM card
slot.

2. Remove the SIM card.

3. Carefully insert the new 4G LTE SIM

card into the SIM card slot with the Verizon
logo facing down.

4. Push the Memory/SIM card slot back

into place. Close the Memory/SIM card slot
cover. Follow the onscreen instructions to
restart the device.

2 3

1

4

Charging light/
Notification Light

Proximity/Light Sensor

Ear Spe aker

Front Camera
Lens

Power/Lock
Key

Volume/
Zoom Key

Camera Key

USB/Charger Port

Speaker

NOTE: Devices and software are constantly evolving—the
screen images and icons you see here are for reference only.

CAUTION: After using your device in water, it’s important
that the USB/Charger port is completely dry before a USB
cable is insterted into it. To remove moisture from the USB/
Charger port, shake your device several times with the USB/
Charger port facing downwards and then use a micro-fibre
cloth to wipe the device dry. If moisture is still visible in the
USB/Charger port, repeat the shaking and drying procedure.

Main Camera Lens

Camera
Light

Wireless Charge
Detection Area

Headset Jack

Memory/
SIM Card
Slot

NFC
Detection
Area