Sony PM-0808 Startup Guide

Important Information

Before you use your device, please read the

Important Information

provided in your device
regarding warranty, safety, and handling
information.

Protecting your device from
water and dust

Your device has IP (Ingress Protection) ratings of IP65
and IP68. These ratings mean that your device is
dust-tight and is protected against low pressure water
stream as well as against the effects of submersion
for 30 minutes in fresh (non-saline) water up to 1.5
meters deep.
Always firmly attach all covers to ensure the water
and dust resistance of the device. If liquid is detected
inside the device, for example, underneath one of the
covers, your warranty will be void.
Before using your device in water and in dusty
conditions, refer to the relevant section of the User
guide for your device for more detailed information.
An online User guide as well as a downloadable
version is available at

www.sonymobile.com/support

.

Overview

21 43 5 6

7

8

9

10

11

13 1514

16

18

19

17

12

1. Charging/
Notification light

2. Headset jack

3. Second microphone

4. Proximity/Light
sensor

5. Ear speaker/Second
speaker

6. Front camera lens

7. Nano SIM card slot
cover

8. Power key

9. Volume/Zoom key

10. Camera key

11. Main microphone/
Speaker

12. Wi-Fi/Bluetooth antenna
area

13. Main camera lens

14. Camera light

15. GPS antenna area

16. Cover for charger/USB
port and memory card slot

17. NFC™ detection area

18. Charging dock
connector

19. Strap hole

NFC payment is only supported when an NFC-SIM
card is inserted in the lower positioned SIM card
holder with “1” marked beside.

Assembly

Your device only supports nano SIM cards.

Make sure you insert the nano SIM card into the
nano SIM card holder before inserting it into the
device. Also, don’t confuse the nano SIM card slot
with the memory card slot.

To insert the nano SIM card

If you insert the nano SIM card while the device is
powered on, the device restarts automatically.

1 Detach the cover for the nano SIM card holder.
2 Using a fingernail or other similar object, drag out the

nano SIM card holder.

3 Place the nano SIM card in the nano SIM card holder,

then reinsert the holder.

4 Re-attach the cover.

Make sure you reinsert the nano SIM card holder in
the correct orientation. When you drag the holder
out to insert the nano SIM card, do not turn the
holder around.

To insert the memory card

1 Remove the memory card slot cover.
2 With the gold colored contacts facing down, insert

the memory card into the memory card slot, then re­attach the memory card slot cover.

Basics

Turning on the device

Make sure that the battery is charged for at least 30
minutes before you turn on the device for the first time.