Sony PCG-GRT99S, PCG-GRT290ZP, PCG-GRT290Z, PCG-GRT280ZT, PCG-GRT40ZP Service Manual

...

SERVICE MANUAL

Ver 6-2005F

Revision History

PCG-GRT99S

PCG-GRT280ZG/GRT290ZP/GRT290Z

PCG-GRT40ZP/GRT40ZLP/GRT40ZTP/GRT40ZCP

Area

Japanese

American

Asian/Oceania/ South Africa

Model

Japanese

US Canadian

International Korean Taiwan China

Line up

PCG-GRT99S/P PCG-GRT280ZG

PCG-GRT290ZP∗ PCG-GRT290Z∗

PCG-GRT40ZP PCG-GRT40ZLP PCG-GRT40ZTP PCG-GRT40ZCP

Confidential

∗ : CTO Model

[MA] [MA] [MA] [MA]

Illust : PCG-GRT99S/P

S400

• Design and specifications are subject to change without notice.

NOTEBOOK COMPUTER

9-876-344-06

Information in this document is subject to change without notice.

Sony, VAIO and CLIE are trademarks or registered trademarks of Sony. Microsoft, Windows, Windows Media, Outlook, Bookshelf and other Microsoft products are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. The word Bluetooth and the Bluetooth logo are trademarks of Bluetooth SIG, Inc. AMD, AMD logo, AMD Duron and combinations thereof, 3DNow!, are trademarks of Advanced Micro Devices, Inc. Intel Inside logo, Pentium and Celeron are trademarks or registered trademarks of Intel Corporation. Transmeta, the Transmeta logo, Crusoe Processor, the Crusoe logo and combinations thereof are trademarks of Transmeta Corporation in the USA and other countries. Graffiti, HotSync, PalmModem, and Palm OS are resistered trademarks, and the Hotsync logo and Palm are trademarks of Palm, Inc. or its subsidiaries. (M) and Motrola are trademarks of Motrora, Inc. Other Motrola products and services with (R) mark like Dragomball are the trademarks of Motrola, Inc.

All other names of systems, products and services in this manual are trademarks or registered trademarks of their respective owners. In this manual, the (TM) or (R) mark are not specified.

Caution Markings for Lithium/Ion Battery - The following or similar texts shall be provided on battery pack of equipment or in both the operating and the service instructions.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.

CAUTION: The ba tter y pack used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100°C (212°F) or incinerate. Dispose of used battery promptly. Keep away from children.

CAUTION: Changing the back up battery.

•Overchar ging, short circuiting, reverse char ging, multilation or incineration of the cells must be avoided to prevent one or more of the following occurrences; release of toxic materials, release of hydrogen and/or oxygen gas, rise in surface temperature.

• If a cell has leaked or vented, it should be replaced immediately while avoiding to touch it without any protection.

Service and Inspection Precautions

1. Obey precautionary markings and instructions

Labels and stamps on the cabinet, chassis, and components identify areas requiring special precautions. Be sure to observe these precautions, as well as all precautions listed in the operating manual and other associated documents.

2. Use designated parts only

The set’s components possess important safety characteristics, such as noncombustibility and the ability to tolerate large voltages. Be sure that replacement parts possess the same safety characteristics as the originals. Also remember that the 0 mark, which appears in circuit diagrams and parts lists, denotes components that have particularly important safety functions; be extra sure to use only the designated components.

3. Always follow the original design when mounting parts and routing wires

The original layout includes various safety features, such as inclusion of insulating materials (tubes and tape) and the mounting of parts above the printer board. In addition, internal wiring has been routed and clamped so as to keep it away from hot or high-voltage parts. When mounting parts or routing wires, therefore, be sure to duplicate the original layout.

4. Inspect after completing service

After servicing, inspect to make sure that all

screws, components, and wiring have been returned to their original condition. Also check the area around the repair location to ensure that repair work has caused no damage, and confirm safety.

5. When replacing chip components...

Never reuse components. Also remember that the negative side of tantalum capacitors is easily damaged by heat.

6. When handling flexible print boards...

•The temperature of the soldering-iron tip should

be about 270C.

•Do not apply the tip more than three times to

the same pattern.

•Handle patterns with care; never apply force.

Caution: Remember that hard disk drives are easily damaged by vibration. Al ways handle with care.

ATTENTION AU COMPOSANT AYANT

RAPPORT

À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

— 2 —

Confidential

PCG-GRT40ZP/GRT40ZLP/GRT40ZTP/GRT40ZCP (AO)

PCG-GRT280ZG/GRT290ZP/GRT290Z (AM)

PCG-GRT99S (J)

Section Title Page Section Title Page

CHAPTER 1. SPECIFICATIONS ................................ 1-1

(to 1-1)

CHAPTER 2. BLOCK DIAGRAM............................... 2-1

(to 2-1)

CHAPTER 3. FRAME HARNESS DIAGRAM........ 3-1

(to 3-1)

CHAPTER 4. EXPLODED VIEWS AND

PARTS LIST

Optical Drive

D-1......................................................................................... 4-2

Palmrest

P-1. ........................................................................................ 4-3

Bottom

B-1. ........................................................................................ 4-4

Main Board

M-1 ........................................................................................ 4-5

Hood Keyboard

HK-1 ...................................................................................... 4-6

Other Parts

O-1......................................................................................... 4-7

LCD

L-1. ........................................................................................ 4-8

Accessories

A-1......................................................................................... 4-9

DIP Switch .............................................................................4-10

(to 4-10)

CHAPTER 5. OTHERS

5-1. The Barcode Label........................................................... 5-1

5-2. Replacing the CPU .......................................................... 5-2

1. Removing the CPU .......................................................... 5-2

2. Installing the CPU............................................................ 5-2

5-3. CTO Information ............................................................. 5-3

1. PCG-GRT290ZP* ........................................................... 5-3

2. PCG-GRT290Z* .............................................................. 5-3

(to 5-3)

History of the changes is shown as the “Revision History” at the end of this data.

— 3 —

Confidential

PCG-GRT40ZP/GRT40ZLP/GRT40ZTP/GRT40ZCP (AO)

PCG-GRT280ZG/GRT290ZP/GRT290Z (AM)

PCG-GRT99S (J)

CHAPTER 1.

SPECIFICATIONS

JAM

PCG-GRT99S/P PCG-GRT280ZG

CPU

LCD HDD 80GB

Graphic

DDR MEMORY 512MB X 1 QUANTITY

[STANDARD/MAX]

OPT-DRIVE DVD+/-RW TV tuner a

int. Wireless LAN a AC adaptor PCGA-AC19V9 Battery PCGA-BP2NY OS WinXP Pro

M-P4-NW

3.06GHz w/HT

16.1"UXGA

(Clear Black)

Geforce FX

Go 5600(64MB)

512/1024

M-P4-NW

3.06GHz w/HT

16.1"UXGA

(Clear Black)

80GB

Geforce FX

Go 5600(64MB)

512MB X 2

1024/1024

DVD+/-RW

PCGA-AC19V9

PCGA-BP2NY

WinXP Home

PCG-GRT40ZP

M-P4-NW

3.06GHz w/HT

16.1"UXGA

(Clear Black)

80GB

Geforce FX

Go 5600(64MB)

512MB X 1

512/1024

DVD+/-RW

PCGA-AC19V9

PCGA-BP2NY

WinXP Pro

PCG-GRT40ZLP PCG-GRT40ZTP

M-P4-NW

3.06GHz w/HT

16.1"UXGA

(Clear Black)

80GB

Geforce FX

Go 5600(64MB)

512MB X 1

512/1024

DVD+/-RW

M-P4-NW

3.06GHz w/HT

16.1"UXGA

(Clear Black)

80GB

Geforce FX

Go 5600(64MB)

512MB X 1

512/1024

DVD+/-RW

××

PCGA-AC19V9

PCGA-BP2NY

WinXP Home

PCGA-AC19V9

PCGA-BP2NY

WinXP Home

PCG-GRT40ZCP

M-P4-NW

3.06GHz w/HT

16.1"UXGA

(Clear Black)

80GB

Geforce FX

Go 5600(64MB)

512MB X 1

512/1024

DVD+/-RW

PCGA-AC19V9

PCGA-BP2NY

WinXP Home

[MA]

• The trademarks or registered trademarks of above table, refer to page 2.

1-1

(END)

Confidential

PCG-GRT40ZP/GRT40ZLP/GRT40ZTP/GRT40ZCP (AO)

PCG-GRT280ZG/GRT290ZP/GRT290Z (AM)

PCG-GRT99S (J)

SVIDEO

OUT

LINE&VIDEO OUT

AMP

CNX-218

Port replicator

RGB

CNX-216

Docking CN to Main Unit

CHAPTER 2.

BLOCK DIAGRAM

RGB

S-VIDEO Out

Video Out

Line Out

RGB

LCD

AV OUT

Gfx

NV31

66MHz 1/2/4/8x

to HDD

VIF-28

VIF-28: for NV31

PriIDE

AGP

CPU Socket

478uFCPGA

FSB 100MHz/133MHzx4

SiS 648

MuTIOL

DDR

333MHz

SMBUS2

PCI

DDR

AAh A8h AEh

33MHz, 32b

ROMINFO

M24C02

CLK GENERATOR ICS952003

D2 or D3h D2h

CLK

BUFFER

ICS93722

LINE IN

AMP

USB1

USB2

SPDIF

Audio Power

USB2.0 HUB

NEC_UPD720110

AGC-8EA

DC IN

Line

USB1 USB2

SPD IF

2ndIDE

Multi Purpoase Bay

to Opt

AC'97

SigmaTel

IFX-257

STAC9750

PS/2

Serial

Parallel

RJ-45

PS/2

Serial

Parallel

Ether

MIC HP

98h 92h

LM86 LM75

2ndIDE

USB2.0

Port0 Port1 Port2

USB0 USB3 USB4

HC0

HC1

W-

SiS963

LAN(PHY)

RTL8201BL

LPC 33MHz

USB5

AC Link

MDC Hdr

Smart

MC 3S

HC2

HITACHI

KBC H8S/2160B 144P TQFP

SMBUS1

SMBUS0

16h 16h

Batt1 Batt2

FAN CPU FAN

Multi Purpoase Bay

mini PCI Slot

Ether

RJ-45

(Ether}

to Port

Replicator

RJ-11

(MODEM)

PS/2

to Port

Replicator

RICOH

CardBus&i.LINK

R5C554

i.LINK Card Bus

BIOS ROM

4Mb

32P TSOP

SST49LF040

Int Keyboard

CardBus

ENX-23

Tuner Board

Choose Card Bus or

Tuner which one

SmSC

SIO LPC47N227 100P TQFP

Serial

to Port

Replicator

Parallel

SVIDEO

AV IN

RF IN

Debug

Parallel

to Port

Replicator

2-1

(END)

Confidential

PCG-GRT40ZP/GRT40ZLP/GRT40ZTP/GRT40ZCP (AO)

PCG-GRT280ZG/GRT290ZP/GRT290Z (AM)

PCG-GRT99S (J)

CHAPTER 3.

FRAME HARNESS DIAGRAM

Wireless LAN Model

ANTENNAANTENNA

LCD

LCD Block

SPEAKER

IEEE 1394

i.LINK

MEMORY

STICK

S VIDEO

VIDEO

OUT

VIDEO

SWX-155 Board (Side-A)

CN600

Side

CN6002

CN6001 CN6004

NICKEL HYDROGEN

BATTERY

CARD, MODEM

PC CARD

CONNECTOR

CN4601

IFX-257 Board (Side-A)

ENX-23 Board (Side-A)

CN601

CN500

TV Tune Model

CN1501

2110

CN4602

CN400

100 2

EXTERNAL MICROPHONE

HEADPHONE

USB USBUSB

CN1902 CN1901 CN1402

CN1701

124

123

100

RAM

DDR SO-DIMM

NETWORK

PHONE

CN1802

CN1803

CN2301

212

CN3001

CN1403

CN3301

CN1801

CN1502

Optical DRIVE

CARD, WIRELESS LAN

Wireless LAN Model

Rear Panel

CN1404

CN1401

CN2202

CN801

CN3201

100

200

199 200

199

CNX-215 Board

(Side-A)

LEX-47 Board (Side-A)

CN3101

CN701

CN2401

PAD, TOUCH

INVERTER

PRINTER MONITORDC-IN

199

CN2101

AV OUT

CN3701

VIF-28 Board

CN3703

(Side-A)

CN3702

CN3501

CN301

DC FAN

1 2

CN303

CN702

CN3002

CN3003

125

CN2302

26 2

CN2201

CN2402

CN3000

CN302

HARD DISK

DC FAN

2nd BATTERY PACK

129

230

CN4100

CN4101

PWS-34 Board (Side-A)

CN4401

KEY BOARD

CN4400

CN8001

112

BATTERY PACK

SWX 142 Board

CN1

112

(Side-A)

From board to connector (direct connection) Harness (connector at both end) Harness (soldered at one end)

Connectors soldered on board and appearing on the panel

3-1

(END)

Confidential

PCG-GRT40ZP/GRT40ZLP/GRT40ZTP/GRT40ZCP (AO)

PCG-GRT280ZG/GRT290ZP/GRT290Z (AM)

PCG-GRT99S (J)

EXPLODED VIEWS AND PARTS LIST

• The parts list is compiled by blocks of a palmrest and bottom etc. The sections of the parts list are different depending on the model. Please refer to list of contents shown in the below.

CHAPTER 4.

Hood Keyboard

LCD

Section Page

Optical Drive

D-1 ................................................................................... 4-2

Palmrest

P-1 .................................................................................... 4-3

Bottom

B-1 ................................................................................... 4-4

Main Board

M-1 ..................................................................................4-5

Hood Keyboard

HK-1 ................................................................................ 4-6

Other Parts

O-1 ................................................................................... 4-7

LCD

L-1.................................................................................... 4-8

Accessories

A-1 ................................................................................... 4-9

DIP Switch ......................................................................... 4-10

Main Board

Optical Drive

Other

Palmrest

Other

NOTE:

• Items marked “ * ” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.

• The mechanical parts with no reference number in the exploded views are not supplied.

•When two or more parts are shown, use the part described first as the main part.

• The parts marked “ $ ” are the High V alue Modules (HVM).

• The parts marked “ # ” are the parts on which barcode label is attached. For the barcode label, refer to CHAPTER 5.

• The parts marked “ & ” are the “Customer Replacable Parts (CRP)” that can be replaced by Field Customer Support. Especially the parts with the <&> mark require the special attention to use them. Here fore, check first whether the desired part is one of the targetted parts of the Customer Replaceable Parts(CRP), or the non-targetted parts by referring to the exploded view.

• Regarding the boards of this model, the discrete parts on the boards cannot be replaced. However, Some connectors can be replaced.

The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.

4-1

Other

Bottom

J GRT99S/P D-1 P-1 B-1 M-1 HK-1 O-1 L-1 A-1

GRT280ZG D-1 P-1 B-1 M-1 HK-1 O-1 L-1 A-1

GRT290ZP∗ D-1 P-1 B-1 M-1 HK-1 O-1 L-1 A-1 GRT290Z∗ D-1 P-1 B-1 M-1 HK-1 O-1 L-1 A-1 GRT40ZP D-1 P-1 B-1 M-1 HK-1 O-1 L-1 A-1 GRT40ZLP D-1 P-1 B-1 M-1 HK-1 O-1 L-1 A-1

GRT40ZTP D-1 P-1 B-1 M-1 HK-1 O-1 L-1 A-1 GRT40ZCP D-1 P-1 B-1 M-1 HK-1 O-1 L-1 A-1

Optical Drive Palmrest Bottom Main Board Hood Keyboard Other LCD Accessories

PCG-GRT40ZP/GRT40ZLP/GRT40ZTP/GRT40ZCP (AO)

PCG-GRT280ZG/GRT290ZP/GRT290Z (AM)

[MA]

Confidential

PCG-GRT99S (J)

+ 14 hidden pages

Sony PCG-GRT99S, PCG-GRT290ZP, PCG-GRT290Z, PCG-GRT280ZT, PCG-GRT40ZP Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

TABLE OF CONTENTS