Sony KV-AW21M80A, KV-AW21M91A User Manual

3-198-746-E1 (1)

Tr initron Color TV

Operating Instructions

• Before operating the unit, please read this manual thoroughly and retain it for future reference.

KV-AW21

M91A M80A

A Specifications

Power requirements

Power consumption (W)

Television system

Color system

Stereo/Bilingual system

Teletext language

Channel coverage

B/G

D/K

8 (Antenna)

Audio output (Speaker)

Number of terminal

(Video)

(Audio)

Picture tube

Tube size (cm)

Screen size (cm)

Dimensions (w/h/d, mm)

Mass (kg)

KV-AW21M91A KV-AW21M80A

110-240 V AC, 50/60 Hz

Indicated on the rear of the TV

B/G, I, D/K, M KV-AW21M91A only

B/G, I, D/K KV-AW21M80A only

PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 KV-AW21M91A only

PAL, PAL 60, SECAM, NTSC3.58 (AV IN), NTSC4.43 KV-AW21M80A only

NICAM Stereo/Bilingual B/G, I, D/K; KV-AW21M91A only A2 Stereo/Bilingual B/G

English, Russian KV-AW21M91A only

VHF : E2 to E12 /UHF : E21 to E69 / CATV : S01 to S03, S1 to S41

UHF : B21 to B68 /CATV : S01 to S03, S1 to S41

VHF : C1 to C12, R1 to R12 / UHF : C13 to C57, R21 to R60 / CATV : S01 to S03, S1 to S41, Z1 to Z39

VHF : A2 to A13 /UHF : A14 to A79 / KV-AW21M91A only CATV : A-8 to A-2, A to W+4, W+6 to W+84

75-ohm external terminal

3 W + 3 W

Input: 2 Phono jacks; 1 Vp-p, 75 ohms

Input: 2 Phono jacks; 500 mVrms

21 in.

600 × 465 × 481

Note

Measured diagonally

Design and specifications are subject to change without notice.

B WARNING

• Dangerously high voltages are present inside the TV.

• TV operating voltage: 110 – 240 V AC.

• Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.

•To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediately wash it away with water.

For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms.

Do not place any objects on the TV. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Do not block the ventilation openings of the TV. Do not install the TV in a confined space, such as a bookcase or built-in cabinet.

Do not open the cabinet and the rear cover of the TV as high voltages and other hazards are present inside the TV. Refer servicing and disposal of the TV to qualified personnel.

For children’s safety, do not leave children alone with the TV. Do not allow children to climb onto it.

Do not operate the TV if any liquid or solid object falls into it. Have it checked immediately by qualified personnel only.

Your TV is recommended for home use only. Do not use the TV in any vehicle or where it may be subject to excessive dust, heat, moisture or vibrations.

Clean the TV with a dry and soft cloth. Do not use benzine, thinner, or any other chemicals to clean the TV. Do not attach anything (e.g., adhesive tape, cellophane tape, glue) on the painted cabinet of the TV. Do not scratch the picture tube.

To prevent fire or shock hazard, do not expose the TV to rain or moisture.

Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV.

Do not plug in too many appliances to the same power socket. Do not damage the power cord.

Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not going to use it for several days.

C Getting Started

Step 1

Insert the batteries (supplied) into the remote.

• Do not use old or different types of batteries together.

Step 2

Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV.

• You can also connect your TV to other optional

components (see E).

Step 3

Plug in the power cord, then press 1 on the TV to turn it on.

• The 1 (standby) indicator flashes green for a few seconds

when turning on the TV. This does not indicate a malfunction.

Step 4

Set up the TV by following the instructions of the “Начальная настройкa” (“Initial Setup”) menu (see D).

Program Sorting/Edit

01 02 03 04

Off Off Off Off

Sorting:

Edit:

PROG

SkipLabel

Exit

Select

Confirm

End

Select

Confirm

Initial Setup

Language:

English

Start Auto Program now?

Yes

First please connect cable/ antenna

Initial Setup

End

Select

Confirm

Select

Confirm

Initial Setup

Display this menu next time?

Yes

Setting up your TV (“Initial Setup”)

When you turn on your TV for the first time, the “Начальная настройкa” (“Initial Setup”) menu will appear. You can adjust settings below using the buttons on the remote control or TV front panel. Press V , v , B or b to select or adjust items, then press

Select the desired menu language.

Select “Yes” to preset the channels automatically.

To skip automatic channel presetting, select “No”.

The “Program Sorting/Edit” menu enables

you to sort and edit the channels (see K).

Adjust the bars on the top and bottom of the menu

if they are slanted (KV-AW21M91A only).

To prevent this “Initial Setup” menu from appearing

again when you turn on the TV by pressing 1, select “No”.

To allow this menu to appear again, select “Yes”.

•You can immediately go to the end of the “Initial Setup” menu by pressing WEGA GATE.

Select

Confirm

End

E Connecting optional components

You can connect a wide range of optional components to your TV. Connecting cables are not supplied.

Connecting to the TV (front)

Audio/Video

cable

PROG

WEGA

(MONO)

GATE

(MONO)

Connecting to the TV (rear)

(MONO)

• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the

program number 0 on the TV (see K).

Antenna

cable

Audio/Video

cable

DVD Player

Camcorder

VCR

F TV buttons and remote control

1 1 Turn off or turn on the TV. 2 Remote control sensor.

3 Wake Up indicator. 3 1 Standby indicator. 4 PROG +/– Select program number. 5 2 +/– Adjust volume. 6 t Select TV or video input.

WEGA GATE menu operations (see H)

4,5 V,v,B,b Select or adjust items. 6

Confirm selected items.

7 WEGA GATE Display or cancel WEGA GATE menu.

WEGA GATE

PROG

WEGA

(MONO)

GATE

PROG

qa qs

qk ql

432

567

A/B

RETURN

PROG

WEGA GATE

1 ?/1 Turn off temporarily or turn on the

TV.

2 a Display the TV program.

3 Jump to last program number that

4 PROG +/– Select program number. To select

5 2 +/– Adjust volume.

8 Not function for your TV. 9 Select surround mode options

(KV-AW21M91A only) (see J).

Display on-screen information.

0 qa Mute the sound. qs A/B Select stereo/bilingual mode:

(KV-AW21M91A only)

6 7 8

Broadcasting Display (selected sound)

NICAM stereo NICAM (stereo), Mono (regular)

NICAM bilingual NICAM Main (main), NICAM

NICAM monaural NICAM Main (main), Mono

A2 stereo

A2 bilingual Main (main), Sub (sub)

• If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound becomes monaural, but the noise is reduced.

has been watched for at least five seconds.

quickly, press and hold until the desired program number appears.

Sub (sub), Mono (regular)

(regular)

Stereo (stereo), Mono (regular)

TV buttons and remote control (continued)

qd t Select TV or video input. qf 0-9 Input numbers. For program numbers 10 and above, enter the second

digit within two seconds.

ql Select sound mode options with a 5-Band Graphic Equalizer display:

(KV-AW21M91A only) “Dynamic”, “Standard”, “Custom”* (see J).

Dynamic

Standard

Custom

100 300 1k 3k 8k

* When the “Custom” mode is selected, you can receive the last adjusted

sound settings from the “Sound Adjustment” option in the menu.

w; Select picture mode options: “Vivid”, “Standard”, “Custom”* (see I).

* When the “Custom” mode is selected, you can receive the last adjusted

picture settings from the “Picture Adjustment” option in the menu.

WEGA GATE menu operations (see H)

6 Confirm selected items. 7 WEGA GATE Display or cancel WEGA GATE menu. qj V, v, B , b Select or adjust items. qk RETURN Return to the previous level.

Timer operations

qg Set TV to turn on automatically according to the desired period of time

(Wake Up Timer) (max. of 12 hours). The indicator on TV lights up amber once you set

the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode.

qh Set TV to turn off automatically according to the desired period of time

(Sleep Timer) (max. of one hour and 30 min.).

Teletext operations (green icon) (KV-AW21M91A only)

Display Teletext broadcast: Teletext t Teletext and TV t TV. If there is no Teletext broadcast, only “100” is displayed at the top left corner of the screen. Display Teletext service contents.

0-9

(red, green, Access the corresponding colored FASTEXT menu. The FASTEXT

yellow, blue) feature can be used only when the FASTEXT broadcast is available.

PIP operations

, , V, v, B , b Not function for your TV.

Input three digits Teletext page number. Display the next or previous page. Stop Teletext display from scrolling. Reveal concealed information. Enlarge the Teletext display. Show TV screen while waiting for Teletext page. Enter the Teletext page number that you want to refer to, then press is displayed, press

to show the text.

When the page number

G Troubleshooting

If you find any problem while viewing your TV, you can either use the “Factory Settings” function (see L) or check the Troubleshooting guide below. If the problem persists, contact your Sony dealer.

Snowy picture, noisy sound

• Check the antenna setup and other connections.

•Preset the channel manually again (see K).

• Set the “Signal Booster” to “Auto” (see K) or try using an external booster.

Distorted picture, noisy sound

• Set the “Signal Booster” to “Off” (see K), or turn off or disconnect any external booster in

use.

Good picture, noisy sound

• Select the appropriate “TV System” (see K).

No picture, no sound

• Check the power cord, antenna setup and other connections.

•Press 4/1 (power) to turn on the TV.

•Press 1 (main power) on the TV to turn off the TV for about five seconds, then turn it on

again.

Good picture, no sound

•Press 2 + to increase the volume level or press to cancel the muting.

Dotted lines or stripes

• Do not use a hair dryer or other equipment near the TV.

• Check the antenna setup.

Double images or “ghosts”

• Use the fine tuning (“Fine”) function (see K).

• Check the antenna setup or use a highly directional antenna.

•Turn off or disconnect any external booster in use.

No color

• Adjust the “Color” level from “Picture Adjustment” (see I).

• Select the appropriate “Color System” (see L).

• Check the antenna setup.

Picture slant

• Keep external speakers or other electrical equipment away from the TV.

• Adjust the “Picture Rotation” (KV-AW21M91A only) (see L).

Abnormal color patches

• Keep external speakers or other equipment away from the TV. Do not move the TV while

the TV is turned on. Press 1 (main power) on the TV to turn off the TV for about 15 minutes, then turn it on again to demagnetize the TV.

Teletext display is incomplete (snowy picture or double images) (KV-AW21M91A only).

• Check the antenna setup and other connections.

• Set the “Signal Booster” to “Auto” (see K) or try using an external booster.

• Use the fine tuning (“Fine”) function (see K).

TV cannot receive stereo broadcast sound or stereo broadcast sound switches on and off or is distorted (KV-AW21M91A only).

• Check the antenna setup and other connections.

Troubleshooting (continued)

The 1 (standby) indicator on your TV flashes red several times after every three seconds.

• Count the number of times the 1 (standby) indicator flashes. Press 1 on the TV to turn it

off, disconnect the AC power cord and inform your dealer or Sony service center of how the indicator flashes (duration and interval).

The TV screen sometimes goes blank for slightly longer than usual during channel change.

• The “Signal Booster” is functioning to detect a weak signal. This does not indicate a malfunction.

TV cabinet creaks.

• Changes in room temperature sometimes make the TV cabinet expand or contract, causing a noise. This does not indicate a malfunction.

A small “boom” sound is heard when the TV is turned on.

• The TV’s demagnetizing function is working. This does not indicate a malfunction.

+ 22 hidden pages