AV Preset ............................................................................................................................................12
This set is to operate on a 220240V AC supply only. Take care
not to connect too many
appliances to the same power
socket as this could result in fire
or electric shock.
Do not open the cabinet and the rear
cover of the TV. Refer to qualified
service personnel only.
Do not cover the ventilation
openings of the TV For
ventilation, leave a space of at
least 10cm all around the set.
For environmental and safety
reasons, it is recommended that
the TV set is not left in standby
mode when not in use. Disconnect
from the mains.
For your own safety, do not touch
any part of the TV, power lead or
aerial lead during lightning
storms.
Never place the TV in hot, humid
or excessively dusty places. Do
not install the TV where it may be
exposed to mechanical vibrations.
Never push objects of any kind into
the set as this could result in a fire
or electric shock. Never spill liquid
of any kind on the set. If any liquid
or solid object does fall through, do
not operate the TV. Have it checked
immediately by qualified
personnel.
To prevent fire or shock
hazard, do not expose the TV
to rain or moisture.
To prevent fire, keep inflammable
objects or naked lights (eg
candles) away from the TV.
Clean the TV with a soft, lightly
dampened cloth. Do not use
benzine, thinner or any other
chemicals to clean the TV. Do not
scratch the TV screen. As a safety
precaution, unplug the TV before
cleaning it.
Place the TV on a secure stable
stand. Do not allow children to
climb on to it. Do not place the TV
on its side or face up.
4
Safety Information
Pull out the power lead by the
plug. Do not pull on the power
lead itself.
Unplug the power lead before
moving the TV. Avoid uneven
surfaces, quick steps or excessive
force. If the set has been dropped
or damaged, have it checked
immediately by qualified service
personnel.
Take care not to place heavy
objects on the power lead as this
could result in damage.
We recommend you wind any
excess lead around the holders
provided on the rear of the TV.
Do not cover the ventilation
openings of the TV with items
such as curtains or newspapers
etc.
Overview of Remote Control Buttons
1
1
!ª
!•
!¶
!§
!∞
!¢
!£
!™
9
Recording button:
!º
Media Selector:
With this remote control you can operate not only this TV but also the main functions of your VCR or DVD.
Switch on the device you want to operate and next press this button repeatedly to select the VCR, TV or
DVD. A green light will be momentarily lit to indicate the chosen function.
Before the first time you want to control a DVD or VCR by using this remote control, you have to set
it up depending on the brand of the device to be used. For more details, refer to chapter “Remote
Control Configuration for VCR or DVD” on page 20.
!¡
Selecting channels:
!™
Muting the Sound:
!£
Adjusting TV volume:
!¢
Displaying the menu system:
remove the menu display from the TV screen.
!∞
Selecting TV mode:
!§
Selecting Sound effect:
!¶
Selecting Picture mode:
!•
Displaying on Screen information:
to cancel.
!ª
VCR or DVD on/off:
To Temporarily Switch Off TV:
Press this button to temporarily switch off TV (the standby indicatoron
the TV lights up). Press again to switch on TV from standby mode.
2
3
4
5
6
7
8
9
!º
!¡
To save energy we recommend switching off completely when TV is not in use.
After 15 minutes without a signal and without any button being
pressed, the TV switches automatically into standby mode.
2
Selecting input source:
input symbol of the source appears on the TV screen.
3
Selecting channels:
If Media Selector is switched to TV or VCR, press this button to select
channels.
For double-digit programme numbers, enter the second digit within 2.5
seconds.
4
a) If Media Selector is switched to TV:
Press this button to watch the last channel selected (watched for at
least 5 seconds).
b) If Media Selector is switched to VCR:
For Sony’s VCR double-digit programme numbers, e.g. 23, press -/- -
first and then the buttons 2 and 3.
5 This button only works in Teletext mode.
6
Selecting screen format:
format of the screen. For more details refer to chapter “Auto Format” on
page 14.
7
Selecting Teletext:
8
a) If Media Selector is switched to TV:
• When MENU is switched on, use these buttons to operate the menu
system. For details refer to “Introducing and Using the Menu System”
on page 9.
• When MENU is switched off, press OK to show a channel overview.
Then pressorto select the channel and then press again the OK
button to watch the selected channel.
b)If Media Selector is switched to VCR or DVD:
Using these buttons you can control the main functions of your VCR or
DVD.
If Media Selector is switched on VCR, press this button to record programmes.
Press this button to select the next or previous broadcast channel.
Press this button to mute TV sound. Press again to restore the sound.
Press this button to adjust the volume of the TV.
Press this button to display the menu on the TV screen. Press again to
Press this button to switch off teletext or video input.
Press this button repeatedly to change the sound effect.
Press this button repeatedly to change the picture mode.
Press this button to display all on-screen indications. Press again
Press this button to switch your VCR or DVD on or off.
Press this button repeatedly until the desired
Press this button repeatedly to change the
Press this button to switch on teletext.
GB
Besides TV functions, all coloured buttons as well as green symbols are also used for
Teletext operation. For more details, please refer to “Teletext” section of this instruction manual.
Overview
5
Overview of TV Buttons
Auto Start Up Button
S video Input jack
Press on the
mark on the
door flap to
reveal the
control panel.
Programme Up or
Down Buttons (Selects
TV channels)
Volume control
buttons
Selecting
Input
source
Video
Input jack
Audio
Input jacks
Standby
indicator
On/Off
switch
Headphones
jack
Inserting Batteries into the Remote Control
Make sure you insert the supplied batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
Connecting the Aerial and VCR
Connecting cables are not supplied.
or
VCR
OUT IN
Overview-Installation
6
Scart lead is optional.
For more details of VCR connection, please refer to the section
“Connecting Optional Equipment” of this instruction manual.
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV
enabling you to: 1) choose the language of the menu screen, 2) choose the country in which
you wish to operate the TV, 3) adjust the picture slant 4) search and store all available
channels (TV Broadcast) and 5) change the order in which the channels (TV Broadcast)
appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by
selecting the appropriate option in the (Set Up menu) or by pressing the Auto Start Up
Button on the TV set.
Connect the TV plug to the mains socket (220-240V AC,
1
50Hz)
The first time that the TV set is connected, it is usually
turned on. If the TV is off, press the on/off button on
the TV set to turn on the TV.
The first time you switch on the TV, a
displays automatically on the TV screen.
Language
menu
Press the orbutton on the remote control to select
2
the language, then press the OK button to confirm your
selection. From now on all the menus will appear in the
selected language.
3
The
Country
menu appears automatically on the TV
screen. Press the orbutton to select the country in
which you will operate the TV set, then press the OK
button to confirm your selection.
• If the country in which you want to use the TV set
does not appear in the list, select “-” instead of a
country.
• In order to avoid wrong teletext characters for
Cyrillic languages we recommend to select Russia
country in the case that your own country does not
appear in the list.
Because of the earth’s magnetism, the picture might slant.
4
The
Picture Rotation
menu allows you to correct the
picture slant if it is necessary.
If it is not necessary, pressorto select
a)
necessary
If it is necessary, pressorto select
b)
and press OK.
Not
Adjust now
then press OK and correct any slant of the picture
between –5 and +5 by pressingor. Finally press
OK
to store.
,
Language
i
Svenska
Norsk
English
Nederlands
Français
Italiano
i
Select Language:
Select country:
4
$
Country
i
4
Sverige
Norge
Italia
Deutschland
Österreich
$
i
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
OK
GB
OK
OK
OK
OK
OK
continued...
First Time Operation
7
5 The Auto Tuning menu appears on the screen. Press the
OK button to select Yes.
Do you want to start
automatic tuning?
Yes
No
OK
OK
6The TV starts to automatically search and store all
available broadcast channels for you.
This procedure could take some minutes. Please be
patient and do not press any buttons, otherwise the
automatic tuning will not be completed.
In some countries the TV Broadcaster installs the
channels automatically (ACI system). In this case,
the TV Broadcaster sends a menu in which you can
select your city by pressing theorbutton and
OK to store the channels.
If no channels were found during the auto tuning
process then a new menu appears automatically on
the screen asking you to connect the aerial. Please
connect the aerial (see page 6) and press OK. The
auto tuning process will start again.
7After all available channels are captured and stored,
the Programme Sorting menu appears automatically
on the screen enabling you to change the order in
which the channels appear on the screen.
a) If you wish to keep the broadcast channels in the
tuned order, go to step 8.
b) If you wish to store the channels in a different order:
8 Press the MENU button to remove the menu from the
screen.
Your TV is now ready for use
First Time Operation
8
MENU
Introducing and Using the Menu System
Your TV uses an on-screen menu system to guide you through the operations. Use the
following buttons on the Remote Control to operate the menu system:
1 Press the MENU button to switch the first level menu on.
2 • To highlight the desired menu or option, pressor.
• To enter to the selected menu or option, press.
• To return to the last menu or option, press.
• To alter settings of your selected option, press //or.
• To confirm and store your selection, press OK.
3 Press the MENU button to remove the menu from the screen.
Menu Guide
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
OK
Reset
PICTURE ADJUSTMENT
The “Picture Adjustment” menu allows you to
alter the picture adjustments.
To do this: after selecting the item you want to
OK
alter press, then press repeatedly//
orto adjust it and finally press OK to
store the new adjustment.
This menu also allows you to customise the
picture mode based on the programme you are
watching:
Live (for live broadcast programmes, DVD
and Digital Set Top Box receivers).
Personal (for individual settings).
Movie (for films).
MENU
OK
MENU
GB
• Brightness, Colour and Sharpness can only be altered if “Personal” mode is selected.
• Hue is only available for NTSC colour signal (e.g: USA video tapes).
• Select Reset and press OK to reset the picture to the factory preset levels.
continued...
Menu System
9
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Sound Adjustment
Effect: Natural
Treble
Bass
Balance
Reset
Dual Sound: Mono
Auto volume: On
The “Sound Adjustment” menu allows you to
alter the sound adjustments.
To do this: after selecting the item you want to
alter, press . Then press repeatedly /
/ or to adjust it and finally press OK
to store the new adjustment.
OK
EffectNatural: Enhances clarity, detail and presence of sound by
using “BBE High Definition Sound system”*.
Dynamic: “BBE High Definition Sound system”* intensifies
clarity and presence of sound for better intelligibility
and musical realism.
Dolby
**Virtual: Simulates the sound effect of “Dolby Surround Pro
Logic”.
Off: Flat response.
Treble Less More
Bass Less More
Balance Left Right
Reset Resets the sound to the factory preset levels.
K
Dual Sound • For a stereo broadcast:
Mono.
Stereo.
• For a bilingual broadcast:
Mono (for mono channel if available).
A (for channel 1).
B (for channel 2).
Auto VolumeOff: volume level changes according to the broadcast signal.
On: volume level of the channels will stay the same, independent of
the broadcast signal (e.g. in the case of advertisements).
• If you are listening to the TV through headphones, the “Effect” option will automatically be switched
to “Off”.
• If you select “Dolby Virtual” on the “Effect” option, the “Auto Volume” option will automatically be
switched to “Off” and vice versa.
* The “BBE High Definition Sound system” is manufactured by Sony Corporation under license
from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word
“BBE” and BBE Symbol are trademarks of BBE Sound, Inc.
**This TV has been designed to create the “Dolby Surround” sound effect by simulating the sound
of four speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded.
The sound effect can also be improved by connecting a suitable external amplifier (for details refer
to “Connecting to external audio Equipment” on page 19).
**Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D
symbol are trademarks of Dolby Laboratories.
Menu System
10
continued...
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
SLEEP TIMER
The “Sleep Timer” option in the “Timer” menu
allows you to select a time period for the TV to
switch itself automatically into the standby
mode.
Timer
Sleep Timer: Off
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Timer
Sleep Timer: Off
To do this: after selecting the option press,
then pressorto set the time period delay
(max. of 4 hours).
• While watching the TV, you can press the
OK
OK
button on the remote control to display the
time remaining.
• One minute before the TV switches itself into
standby mode, the time remaining is displayed on
the TV screen automatically.
LANGUAGE / COUNTRY
The “Language/Country” option in the “Set
Up” menu allows you to select the language
that the menus are displayed in. It also allows
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
OK
Detail Set Up
you to select the country in which you wish to
operate the TV set.
To do this: after selecting the option, press
and then proceed in the same way as in the
steps 2 and 3 of the section “Switching On the
TV and Automatically Tuning” on page 7.
OK
GB
AUTO TUNING
The “Auto Tuning” option in the “Set Up”
menu allows you to automatically search for
and store all available TV channels.
OK
To do this: after selecting the option, press
and then proceed in the same way as in the
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
OK
Detail Set Up
steps 5 and 6 of the section “Switching On the
TV and Automatically Tuning” on page 8.
OK
continued...
Menu System
11
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
OK
Detail Set Up
PROGRAMME SORTING
The “Programme Sorting” option in the “Set
Up” menu allows you to change the order in
which the channels (TV Broadcast) appear on
the screen.
To do this: after selecting the option, press
and then proceed in the same way as in step 7 b)
of the section “Switching On the TV and
Automatically Tuning” on page 8.
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
PROGRAMME LABELS
The “Programme Labels” option in the “Set
Up” menu allows you to name a channel using
up to five characters (letters or numbers).
OK
To do this:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
OK
Detail Set Up
1 After selecting the option, press, then
pressorto select the programme
number with the channel you wish to name.
2 Press. With the first element of the Label
column highlighted, pressorto select
OK
a letter or number (select “-“ for a blank), then
press to confirm this character. Select the
other four characters in the same way. Finally
press OK to store.
AV PRESET
The “AV Preset” option in the “Set Up” menu
allows you to designate a name to the external
equipment you have connected to the input
OK
sockets of this TV.
To do this:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
OK
Detail Set Up
1 After selecting the option, press, then
press orto select the input source you
wish to name (AV1, AV2 and AV3 are for the
rear Scarts and AV4 for side connectors).
Then press.
OK
2 A label automatically appears in the label
column:
a) If you want to use one of the 6 predefined
label (CABLE, GAME, CAM, DVD, VIDEO or SAT), press orto select
the desired label and finally press OK to
store.
b) If you want to set a different label, select
Edit and press. Then with the first
element highlighted, pressorto
select a letter, number or “-“ for a blank,
then press to confirm this character.
Select the other four characters in the same
way and finally press OK to store.
12
Menu System
continued...
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
OK
Detail Set Up
2The following option is only available depending on the country you have selected
in the “Language/Country” menu.
After selecting the System option, press.
Then pressorto select the TV Broadcast system (B/G for western European
countries or D/K for eastern European countries). Then press .
3 After selecting the Channel option, press .
Then pressorto select the channel tuning (“C” for terrestrial channels or “S” for
cable channels). Next press. After that, press the number buttons to enter directly the
channel number of the TV Broadcast or the channel of the VCR signal. If you do not know
the channel number, pressorto search for it. When you tune the desired channel,
press OK twice to store.
Repeat all the above steps to tune and store more channels.
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the
“Set Up” menu allows you to:
a) Preset channels or the VCR channel one by
one to the programme order of your choice.
To do this:
1 After selecting the ”Manual Programme
Preset” option, press then with
Programme option highlighted press.
Pressorto select on which
OK
programme number you want to preset the
channel (for VCR, select programme number
“0”). Then press.
b) Label a channel using up to five characters.
To do this: Highlighting the Programme option, press the PROG +/- button to select the
programme number with the channel you wish to name. When the programme you want to
name appears on the screen, select the Label option and press. Next pressorto
select a letter, number or “-“ for a blank. Press to confirm this character. Select the other
four characters in the same way. After selecting all the characters, press OK twice to store.
c) Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the
best possible picture, however you can manually fine tune the TV to obtain a better picture
reception in case the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT
option and press. Next pressorto adjust the fine tuning between -15 and +15.
Finally press OK twice to store.
d) Skip any unwanted programme numbers when they are selected with the PROG +/-
buttons.
To do this: Highlighting the Programme option, press the PROG +/- button to select the
programme number you want to skip. When the programme you want to skip
appears on the screen, select the Skip option and press . Next pressorto select
Yes. Finally press OK twice to confirm and store.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
e) View and record scrambled channels when using a decoder connected to Scart
3/3 directly or through a VCR.
To do this: select the Decoder option and press. Next pressorto select On. Finally
press OK twice to confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
S
This option is only available depending on the country you have selected in the
“Language/Country” menu.
continued...
Menu System
GB
13
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
OK
AUTO FORMAT
The “Auto Format” option in the “Detail Set
Up” menu allows you to automatically change
the aspect ratio of the screen.
To do this: after selecting the option, press.
Then pressorto select On (if you wish
On
Auto
the TV set to automatically switch the screen
TV
On
0
format according to the broadcast signal) or Off
0
(if you wish to keep your preference). Finally
OK
press OK to store.
Even if you have selected “On” or “Off” in the “Auto Format” option,
you can always modify the format of the screen by pressing
repeatedly on the remote control to select one of the following formats:
Smart: Imitation of wide screen effect for 4:3 broadcast.
4:3:Conventional 4:3 picture size, full picture information.
14:9:Compromise between 4:3 and 16:9 picture size.
Zoom: Widescreen format for letterbox movies.
Wide: For 16:9 broadcast. Full picture information
In “Smart”, “Zoom” and “14:9” modes, parts of the top and bottom of
the screen are cut off. Pressorto adjust the position of the
image on the screen (e.g. to read subtitles).
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
OK
NOISE REDUCTION
The “Noise Reduction” option in the “Detail Set
Up” menu allows you to automatically reduce
the picture noise visible in the broadcast signal.
To do this: after selecting the option, press .
Then pressorto select Auto. Finally
On
Auto
TV
press OK to confirm and store.
On
0
0
To cancel this function afterwards, select “Off”
OK
instead of “Auto” in the step above.
Smart
4:3
14:9
Zoom
Wide
14
Menu System
continued...
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
OK
If you select “AUTO”, the output signal will always be the same one that is displayed on
the screen.
If you have connected a decoder to the Scart 3/3 or to a VCR connected to this
Scart, please remember to change back the “AV3 Output” to “AUTO” or “TV” for correct
unscrambling.
AV3 OUTPUT
The “AV3 Output” option in the “Detail Set
Up” menu allows you to select the source to be
output from the Scart connector 3/3 so
that you can record from this Scart any signal
coming from the TV or from an external
equipment connected to the Scart connectors
On
Auto
TV
On
0
0
OK
1/1 or 2/2 or side connectors
S
4 or 4 and 4.
If your VCR supports Smartlink, this
procedure is not necessary.
To do this: after selecting the option, press.
Then pressorto select the desired
output signal: TV, AV1, AV2, AV4, YC4 or
AUTO.
S
S
GB
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
TV SPEAKERS
The “TV Speakers” option in the “Detail Set
Up” menu allows you to mute the TV speakers
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
OK
in order to listen to the TV from an external
amplifier connected to the audio outputs on the
rear of the TV set.
On
Auto
To do this: after selecting the option, press .
TV
On
0
Then press or to select Off. Finally
0
press OK to confirm and store.
OK
To cancel this function afterwards, select “On”
instead of “Off” in the step above.
RGB CENTRING
When connecting an RGB source, such as a
“PlayStation”, you may need to readjust the
horizontal position of the picture. If this is the
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
OK
case, you can readjust it through the “RGB
Centring” option in the “Detail Set Up”.
To do this: while watching an RGB source select
On
Auto
TV
the “RGB Centring” option and press . Then
On
0
0
press or to adjust the centre of the
picture between –10 and +10. Finally press OK
OK
to confirm and store.
continued...
Menu System
15
Level 1 Level 2Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Auto Format:
Noise Reduction:
AV3 Output:
TV Speakers:
RGB Centring:
Picture Rotation:
OK
PICTURE ROTATION
Because of the earth’s magnetism, the picture
might slant. If this is the case, you can correct
the pictures slant by using the “Picture
Rotation” option in the “Detail Set Up” menu.
To do this: after selecting the option, press .
On
Auto
Then pressorto correct any slant of the
TV
On
0
picture between -5 and +5.
0
OK
16
Menu System
Teletext
Teletext is an information service transmitted by most TV stations. The index page of the
teletext service (usually page 100) gives you information on how to use the service. To
operate teletext, use the remote control buttons as indicated below.
Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.
To switch on Teletext :
After selecting the TV channel which carries the teletext service you wish
to view, press .
To select a Teletext page:
Input 3 digits for the page number, using the numbered buttons.
• If you make a mistake, retype the correct page number.
• If the counter on the screen continues searching, it is because the page is not available. If this is the
case, input another page number
To access the next or preceding page:
Press PROG + () or PROG - ().
TELETEXT
TELETEXT
TELETEXT
TELETEXT
TELETEXT
TELETEXT
TELETEXT
TELETEXT
Index
Index
Index
Index
Index
Index
Index
Index
Programme
Programme
Programme
Programme
Programme
Programme
Programme
Programme
News
News
News
News
News
News
News
News
Sport
Sport
Sport
Sport
Sport
Sport
Sport
Sport
Weather
Weather
Weather
Weather
Weather
Weather
Weather
Weather
25
25
25
25
25
25
25
25
153
153
153
153
153
153
153
153
101
101
101
101
101
101
101
101
98
98
98
98
98
98
98
98
To superimpose teletext on to the TV:
Whilst you are viewing teletext, press . Press it again to cancel teletext mode.
To freeze a teletext page:
Press /. Press it again to cancel the freeze.
To reveal concealed information (e.g: answer to a quiz):
Press /. Press it again to conceal the information.
To select a sub page:
A teletext page may consist of several sub pages. In this case the page number that appears
on the upper left corner will become from white to green and one or more arrows will appear
next to the page number. Repeatedly press or buttons on the remote control to watch
the desired sub page.
To Switch Off Teletext:
Press .
Fastext
Fastext service lets you access Teletext pages with one button push.
When you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at
the bottom of the teletext page. Press the appropriate coloured button (red, green, yellow
or blue) to access the page corresponding to your menu choice.
GB
Teletext
17
Connecting Optional Equipment
Using the following instructions you can connect a wide range of optional equipment to
your TV set. (Connecting cables are not supplied).
S VHS/Hi8
DVC
camcorder
A
8mm/Hi8/
DVC
camcorder
G
F
VCR
VCR
Decoder
B
C
D
E
DVD
Hi-fi
When you connect the headphones,
the TV speakers will automatically
be muted.
“PlayStation”*
1
Decoder
2
* “PlayStation” is a product of Sony
Computer Entertainment, Inc.
* “PlayStation” is a trademark of Sony
Computer Entertainment, Inc.
• To avoid picture distortion, do not connect external equipment to connectors A and B
at the same time.
• Do not connect a Decoder to the Scart F.
• Games that use a “GUN” attachment to point at the screen do not work correctly due to
100Hz technology used in this television.
Connecting a VCR:
To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction
manual. We recommend you connect your VCR using a scart lead. If you do not have a scart
lead, tune in the VCR test signal to the TV programme number “0” by using the “Manual
Programme Preset” option. (for details of how to manually programme these presets, see page
13, step a).
Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
Connecting a VCR that supports Smartlink:
Smartlink is a direct link between the TV set and the VCR. For more information on
Smartlink, please refer to the instruction manual of your VCR.
If you use a VCR that supports Smartlink, please connect the VCR to the TV using a Scart
lead to the Scart 3/3G.
If you have connected a decoder to the Scart 3/3 G or through a
S
S
VCR connected to this Scart:
Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the
“Decoder**” option, select “On” (by usingor). Repeat this option for each scrambled
signal.
**This option is only available depending on the country you have selected in the
“Language/Country” menu.
18
Additional Information
continued...
Connecting to external Audio Equipment:
Plug in your Hi-Fi equipment to the audio output sockets D if you wish to amplify the audio
output from TV. Next , using the menu system, select the “Set Up” menu, enter the “Detail Set
Up” menu and set “TV Speakers” to “Off”.
Audio level of the external speakers can be modified by pressing the volume buttons on the
remote control. Also treble and bass settings can be modified through the “Sound
Adjustment” menu.
To enjoy “Dolby Virtual” sound effect through your
Hi-Fi equipment:
Place the speakers of your equipment in front of your
listening position and beside the TV set but keeping a
distance of 50 cm between each speaker and the TV set.
Then by using the menu system, select the menu “Sound
Adjustment”. Next select “Dolby Virtual” on the “Effect”
option.
Left Hi-Fi
speaker
~50°
Right Hi-Fi
speaker
Using Optional Equipment
1 Connect your equipment to the designated TV
socket, as indicated in the previous page.
2 Switch on the connected equipment.
3 To watch the picture of the connected equipment, press the button repeatedly until the
correct input symbol appears on the screen.
SymbolInput Signals
1• Audio / video input signal through the Scart connector E
1• RGB input signal through the Scart connector E. This symbol appears only
if an RGB source has been connected.
2• Audio / video input signal through the Scart connector F.
2• RGB input signal through the Scart connector F. This symbol appears only
if an RGB source has been connected.
3• Audio/video input signal through the Scart connector G.
S
3•S Video Input signal through the Scart connector G. This symbol appears
only if an S Video source has been connected.
4• Video input signal through the phono socket B and Audio input signal
through C.
S
4•S Video Input signal through the front S Video input jack A and Audio
signal through C. This symbol appears only if an S Video source has been
connected.
4 Press button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select 4 or 4
input signal using the instructions above. Finally, refer to the “Sound Adjustment” section of
this manual and select “Dual Sound” “A” on the sound menu screen.
Your sitting position
S
GB
Additional Information
19
Remote Control Configuration for VCR/DVD
In it’s default condition this remote control will operate the basic functions of this Sony TV, Sony
DVDs and most Sony VCRs. To control other VCRs and DVDs of other manufacturers (and
some Sony VCR models), please complete the following steps:
•Before you start, look up the 3 digit code for your brand of DVD or VCR from the list
below. On those brands that have more than one code, enter the first code number.
•Sony will endeavour to update the software according to market changes.
Therefore, please refer to the code table included with the remote control for
the latest code set.
1 Press the Media Selector button on the remote control repeatedly until the
required green light (VCR or DVD) is lit.
If Media Selector is on TV position, code numbers will not be stored.
2 Before the green light goes out, press and hold the yellow button for
approximately 6 seconds until the green light starts flashing.
3 Whilst the green light is flashing, enter all three digits of the code for your
brand of VCR or DVD using the number buttons on the remote control.
If your selected code is entered correctly, all three green lights will be lit
momentarily.
4 Turn on your brand VCR or DVD and check that the main functions work.
• If your device is not working or some of the functions do not work
please check that you entered the correct code set or try the next code
listed against the brand.
• Your brand codes may be lost if weak batteries are not replaced within
a few minutes. To reset your brand of DVD or VCR please repeat the
above steps. A small label is added inside the battery door to allow you
to record your brand codes.
• Not all brands are covered and not all models of every brand may be covered.
including audio / video
input, RGB input,
monitor audio/video
output.
S
(CENELEC standard)
including audio / video
input, S video input,
selectable audio / video
output and Smartlink
interface.
audio outputs (Left/
Right) - phono jacks
Side Terminals
S
4 S Video input – 4 pin DIN
4 video input – phono jack
4 audio input – phono jacks
headphones jack
Sound Output:
2 x 20 W (music power)
2 x 10 W (RMS)
Woofer:
30 W (music power)
15 W (RMS)
Power Consumption:
130 W
Standby Power Consumption:
0.3 W
Dimensions (w x h x d) :
Approx. 892 x 565 x 584 mm.
Weight:
Approx. 62.2 Kg.
Accessories supplied:
1 Remote Control (RM-932)
2 Batteries (IEC designated)
Other features:
• 100 Hz picture
• Teletext, Fastext, TOPtext (250 page TEXT
memory)
• Sleep Timer
• Smartlink (direct link between your TV set
and a compatible VCR. For more
information on Smartlink, please refer to
the Instruction Manual of your VCR).
• TV system Autodetection.
• Dolby Virtual.
• BBE.
• Auto Format.
• ACI (Auto Channel Installation).
GB
Design and specifications are subject to change without notice.
Ecological Paper - Totally Chlorine Free
Additional Information
21
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Problem
No picture (screen is dark) and no
sound.
Poor or no picture (screen is dark), but
good sound.
No picture or no menu information
from equipment connected to the Scart
connector.
Good picture, no sound.
No colour on colour programmes.
Distorted picture when changing
programmes or selecting teletext.
Wrong characters appear when
viewing teletext.
Picture slanted
Noisy picture when viewing a TV
channel.
No unscrambling or unstable picture
whilst viewing a scrambled channel
with a decoder connected through the
Scart connector
Remote control does not function.
The standby indicator on the TV
flashes.
S
3/3.
Solution
• Check the aerial connection.
• Plug the TV in and press the button on the front of
the TV.
• If the standby indicator is on, press TV button on
the remote control.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to the
factory settings.
• Check that the optional equipment is on and press the
button repeatedly on the remote control until the
correct input symbol is displayed on the screen.
• Press the + button on the remote control.
• Check that “TV Speakers” is “On” in the “Detail Set Up”
menu.
• Check that headphones are not connected.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to
factory settings.
• Turn off any equipment connected to the Scart
connector on the rear of the TV.
• Using the menu system, enter to the “Language/Country”
menu and select the country in which you operate the TV
set. For Cyrillic languages, we recommend to select Russia
country in the case that your own country does not appear
in the list.
• Using the menu system, select the “Picture Rotation”
option in the “Detail Set Up” menu to correct the
picture slant.
• Using the menu system, select the “Manual
Programme Preset” menu and adjust Fine Tuning
(AFT) to obtain better picture reception.
• Using the menu system, select the “Noise Reduction”
option in the “Detail Set Up” menu and select
“Auto” to reduce the noise in the picture.
• Using the menu system, select the “Set Up” menu. Then
enter to “Detail Set Up” option and set “AV3 Output” to
“TV”.
• Check that the Decoder is not connected on the scart
2/2.
• Check that the Media Selector on the remote control is set
to the device you are using (VCR, TV or DVD).
• If the remote control does not operate the VCR or DVD
even when the Media Selector has been set correctly. Enter
the necessary code set as explained on “Remote Control
Configuration for VCR/DVD” chapter of this instruction
manual.
• Replace the batteries.
• Contact your nearest Sony service centre.
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
Additional Information
22
Увод
Благодарим Ви за избора на този цветен телевизор Sony с плосък екран FD
Trinitron.
Преди използване на телевизора прочетете внимателно това ръководство за
експлоатация и го запазете за бъдещи изяснения.
•
Символи използвани в това ръководство
•
Важна информация
•
Информация за функцията
•
1,2...
Последователност за
следване на инструкциите
.
.
.
:
OK
•
Потъмнените бутони на дистанционното
управление показват кои бутони трябва да
се натискат за изпълнението на различните
операции.
Свързване на допълнителни апарати
Боравене с допълнителни апарати
Конфигуриране на пулта за дистанционно управление на DVD или Видео апарата
Характеристики
Отстраняване на неизправности ...................................................................................................22
Hикогa не пъхaйте кaквито и да
било прeдмети в телeвизорa, тьй
като товa може дa причини пожар
или токов удар. Hикога не
разливaйте течности по
телевизора. B случай, чe течност
или твърд прeдмет попaднат в
телевизора го изключете.
Cвържете сe нeзaбaвно c
квалифицирани служители нa Coни.
Tози тeлeвизор може да работи
само на захранващо
напрежение 220-240 V.
Bнимавайте да не включвате
твърде много уреди в един
контакт, тьй като това може да
причини токов удар.
He oтвaряйте кутиятa и задния
кaпaк нa тeлeвизорa.
Oбръщайте се само към
квaлифициран сервизен
перcoнaл.
He пoкривaйтe
вeнтилaциoннитe отвoри нa
тeлeвизoрa.
Ocтaвeтe нaй-мaлко 10 см.
рaзтoяниe oкoлo тeлeвизoрa зa
вeнтилация.
Пoчиствaйтe тeлeвизора c мeкa,
лeкo влажна кърпа. He използвaйтe
бeнзин, рaзрeдитeл или дрyги
xимикaли, зa дa почиститe
тeлевизoрa. He дpacкaйтe пo eкpaнa
нa тeлeвизopa. Зa пo-гoлямa
бeзoпacтнocт изключвaйтe
тeлевизopa oт кoнтaктa, кoгaтo го
пoчиcтвaтe.
Пo причини за безoпастност от
въздействие на природни
явления e препоръчително да
не оставяте телевизора в
режим “stand by”, a да гo
изключватe централно.
Зa Baшa coбcтвeнa бeзoпacнocт
нe пипaйтe тeлeвизорa, кaбeлa
или aнтeнaтa му по врeмe нa
гръмотeвични бури.
Hикoгa нe пoстaвяйтe
тeлeвизoрa нa гoрeщи, влaжни
или изключитeлнo прaшни
мecтa. He инстaлирaйтe
тeлeвизорa нa мecтa кьдето
можe дa бъде изложeн нa
меxaнични вибрaции.
Koгaтo изключвaтe тeлeвизopa,
дъpпaйтe щeпceлa, a нe кaбелa.
He пocтaвяйтe тeжки пpeдмети
въpxy кaбeлa, тъй кaтo тoвa
мoжe дa гo пoвpeди.
Пpeпopъчвaмe ви дa нaвиeтe
излишния зaxpaнвaщ кaбeл
oкoлo пpeднaзнaчeнитe зa цeлтa
пpиcпocoблeния нa зaднaтa
cтpaнa нa тeлeвизopa.
Пocтaвяйтe тeлeвизopa нa
cигypнa, cтaбилнa пocтaвкa.
He пoзвoлявaйтe нa дeцa дa ce
кaтepят пo нeгo. He гo
oбpъщaйтe нa cтpaни или пo
”.
Б
“гpъ
4
Техника на безопасност
Излючвaйтe кaбeлa нa
тeлeвизopa пpeди дa гo
мecтитe. Пpи пpeмecтвaнeтo
избягвaйтe нepaвни
пoвъpxнocти и нe пpaвeтe бъpзи
кpaчки. Aкo изпycнeтe или
нapaнитe тeлeвизopa,
нeзaбaвнo ce кoнcyлpaйтe c
квaлифициpaни cepвизни
cлyжитeли нa Coни.
He пoкpивaйтe
вeнтилaцкoннитe oтвopи нa
тeлeвизopa
c пpeдмeти кaтo пepдeтa,
вecтници и дp.
Основно описание на бутоните на дистанционното управление
1
!ª
!•
!¶
!§
!∞
!¢
!£
!™
9 Бутон за запис: Ако Селектора на Екипа е в позиция VCR, натиснете този бутон за запис на
програми.
!º Селектор на Екипа: С този пулт за дистанционно управление можете да контролирате не само
телевизора, но и основните функции на Видеото и на DVD апарата. Включете екипа който желаете
да контролирате и после натиснете няколко пъти този бутон за избор на DVD, TV или VCR (за
видео). Зеления индикатор ще светне за момент на избраната позиция.
Преди да използвате за първи път пулта за дистанционно управление за контролиране нa DVD
апaрата или на Видеото ще трябва да го конфигурирате в зависимост от марката на вашия екип.
За целта вижте в глава «Конфигурация на пулта за дистанционно управление на DVD или Видео
апарата» на стр.20.
!¡ Избор на канали: Натиснете го за избор на преден или следващ канал.
!™ Елиминиране на звука: Натиснете го за премахване на звука. Натиснете го отново за възвръщане
на звука.
!£ Настройване на силата на звука: Натиснете го за настройване на силата на звука.
!¢ Активиране на системата от менюта: Натиснете го за да видите менюто на екрана. Натиснете го
отново за премахване и връщане на нормалния ТВ екран.
!∞ Избор на режим на телевизия: Натиснете го за да изключите телетекста или входа за видео.
!§ Избор на звуков ефект: Натиснете този бутон няколко пъти, за да промените звуковия ефект.
!¶ Избор на режим на образа: Натиснете го няколко пъти за смяна на режима на образа.
!• Изобразяване на информация на екрана: Натиснете го за изобразяване на всички индикации на
екрана. Натиснете го отново за премахване
!ª Вкл./Изкл. на Видео или DVD апарата: Натиснете за вкл./изкл. на Видео или DVD апарата свързан
към телевизора.
1 Временно изключване на телевизора
Натиснете го за временно изключване на телевизора (индикаторът за
режим на очакванеще светне). Натиснете го отново за да
2
3
4
5
6
7
8
9
!º
!¡
включите телевизора от режима на временно изключване (standby).
За икономия на ел. енергия се препоръчва цялостното изключване на
телевизора когато не се използва.
Ако в продължение на 15 мин. няма ТВ сигнал и не се натискат
бутоните, телевизора ще мине автоматично в режим на временно
изключване (standby).
2 Избор на входен сигнал: Натиснете го няколко пъти, докато символа
на желания входен сигнал се появи на екрана.
3 Избор на канали: Aкo Ceлeктopa нa Екипа e в пoзиция TV или VCR
(видeo), нaтиcнeтe зa избop нa кaнaли.
За двуцифрени пограмни номера натиснете втората цифра за
времетраене по-малко от 2.5 сек.
4
а) Ако Селектора на Екипа е в позиция «TV»:
върнете последния избран канал (предният канал трябва да е бил
изобразен в продължение на най-малко 5 сек.).
б) Ако Селектора на Екипа е в позиция «VCR»:
Sony, за двуцифрени програмни номера, напр. 23, натиснете първо
-/-- и след това бутоните 2 и 3.
5 Този бутон функционира самно в режим на телетекст.
6 Избор на формат на екрана: Hатиснете този бутон няколко пъти, за
да смените формата на образа. За по-подробна информация се
консултирайте с глава
7 Избор на телетекста: Натиснете го за изобразяване на телетекста.
8 а) Ако Селектора на Екипа е в позиция «TV»:
•
Когато MENU е активирано, използвайте тези бутони за
предвижване през системата от менюта. За повече детайли вижте в
глава «Увод и боpaвeнe cъс системата от менюта» на стр. 9.
•
Когато MENU не е активирано, натиснете OK за визуализиране на
генералния списък на настроените канали. Изберете канала (ТВ
предаване) натискайкиилии след това натиснете отново
OK за да видите избрания канал.
б) Ако Селектора на Екипа е в позиция «VCR» (видео) или DVD:
Използвайте тези бутони за контролиране на основните функции
на Видеото или DVD апарата свързани към телевизора.
.
«
Aвтоформат» на стр. 14.
Натиснете го за да
Aко използвате видео
BG
Освен телевизионните функции, всички цветни бутони се използват също така и за операциите
на телетекста. За повече информация вижте в главата «Телетекст», в това ръководство за
експлоатация.
Overview
5
Основно описание на бутоните на телевизора
Бутон 3а избор на
предна / следваща
програма (избор на
ТВ предавания)
И
Бутони за
контрол на
силата на звука
Бутон 3а вpъщане
към фабричната
настройка нa
телевизора
Вход за S video
Вход за
видео
ндикатор за
режим на временно
изключване
(standby).
Натиснете
върху
маркировката
на капачето
за откриване на
буксите
Бутон за
включване/
изключване
Бутон за
избор на
входен
сигнал
Букса за
видео вход
Букса за
слушалки
Инсталиране на батериите в устройството за
дистанционно управление
Поставете приложените батерии с правилно разположени полюси.
Опазвайте околната среда и изхвърляйте използваните батерии в контейнерите за тази цел.
Свързване на антената и видеото
Кабелите за свързване не са приложени серийно.
За повече детайли за свързването на видеото вижте в главата «Свързване на допълнителни
апарати», в това ръководство за експлоатация.
Основно описание - Инсталиране
6
или
видео
OUT IN
Свързването чрез Евроконектора е опция
Включване и автоматично настройване на телевизора
Language
Select Language:
OK
i
4
Svenska
Norsk
English
Nederlands
Français
Italiano
i
$
Дъpжaвa
Избepи дъpжaвa:
OK
i
4
Sverige
Norge
Italia
Deutschland
Österreich
i
$
OK
OK
OK
AÍo ÍapÚ. Ìe e xopËÁoÌÚ.
PeÖyÎ. ÇépÚ. Ìa ÍapÚ.
He e ÌeoÄxoдËÏo
PeÖyÎpaÈ ceÖa
OK
Когато включите за първи път телевизора, на екрана ще се появи
последователност от менюта чрез които ще можете да: 1) изберете езика на
менютата, 2) изберете държавата в която желаете да използвате апарата, 3)
настроите наклона на картината, 4) търсите и запаметите автоматично всички
канали на разположение (ТВ предавания) и 5) смените реда на появяване на
каналите (ТВ предавания).
Ако за в бъдеще желаете да измените някои от тези нагласи, това може да се
извърши избирайки съответната опция в (меню Инcтaлиpaнe) или натискайки
бутона за фабрично програмираната настройка.
1 Включете кабела за захранването (220-240V AC,
50Hz).
Когато свържете телевизора за първи път в ел.
мрежа, той се включва автоматично. Ако не,
натиснете бутона вкл./изкл. на лицевия панел на
телевизора, за да го включите.
Когато включите телевизора за първи път, на
екрана автоматично ще се появи менюто Language
(Език).
2Натиснете бутонаилиот дистанционното
управление за да изберете езика и после натиснете
бутона ОК за да пoтвърдите избора. От този момент
всички менюта ще се появяват на избрания език.
3 На екрана автоматично ще се появи менюто
Държава. Натиснете бутонаилиза избор на
държавата, където желаете да използвате
телевизора, след което натиснете ОК за
пoтвърждаване на избора.
4 Възможно е, в резултат на земния магнетизъм,
образа да се появи наклонен.
Мнюто BBBBééééppppÚÚÚÚeeeeÌÌÌÌeeee ÌÌÌÌaaaa ÍÍÍÍaaaappppÚÚÚÚ. позволява настройването
на образа, при необходимост.
a) Ако не е необходимо, натиснетеилиза
избор на HHHHeeee eeee ММММeeeeooooДДДДxxxxooooААААЛЛЛЛППППoooo и натиснете ОК.
б) Ако е необходимо, натиснетеилиза избор
на PPPPeeeeÖÖÖÖyyyyÎÎÎÎppppaaaaÈÈÈÈ cccceeeeÖÖÖÖaaaa и натиснете ОК. В последствие
настройте наклона на картината нагласяйки
между -5 и +5 натискайкиили. Натиснете
• Ако в списъка не фигурира държавата в
която ще използвате телевизора изберете «-»
нa мястото на държава.
запаметява всички канали (ТВ предавания) на
разположение.
7След като телевизора се настрои и запамети
a) Ако не желаете да смените реда на каналите,
отидете в стъпка 8.
б) Ако желаете да смените реда на каналите:
номера на програма на съответния канал (ТВ
предаване), чиято позиция желаете да
смените и след това натиснете.
на програмата, на която желаете да
запаметите избрания канал (ТВ предаване),
след което натиснете.
преподредите други ТВ канали.
8 Натиснете бутона MENU, за връщане към нормален ТВ режим.
Телевизора е готов за работа
Първоначално включване
8
Този процес може да продължи няколко минути.
Бъдете търпеливи и не натискайте нито един
бутон, докато продължава процеса на
настройване, в противнен случай процеса няма
да се завърши.
B някои страни телевизионната компания
инсталира автоматично всички канали (система
ACI). B този слyчай, самата компания изпраща
меню, в което трябва да изберете вашия град,
натискайки бутонаилии OK, за да
запишете каналите в паметта.
Ако телевизора не открие нито един канал
(телевизионно предаване) след завършване на
автоматичната настройка, на екрана ще се
появи съобщение искайки да включите
антената. Моля включете я така както е описано
на стр. 6 в това ръководство и натиснете ОК.
Процеса на автоматична настройка започва
отново.
всички канали (ТВ предавания), на екрана
автоматично ще се появи менюто Подреждане на програми, за да можете да смените реда на
появяване на програмите на екрана.
1 Натиснете бутонаилиза да изберете
2 Натиснете илиза избор на новия номер
3 Повторете стъпките б)1 и б)2 ако желаете да
MENU
Увод и боравене със системата от менюта
Tози телевизор използва система от менюта на екрана за да Ви води при
различните операции. Използвайте следните бутони от дистанционното
управление, за да се движите през менютата:
1 Натиснете бутона MENU за поява на първото ниво oт менюто на
MENU
екрана.
2 • За подчертаване на желаното меню или избор, натиснетеили
.
• За да влезете в избраното меню или избор, натиснете.
• За връщане в предно меню или избор, натиснете.
OK
• За промяна на настройката на желания избор натиснете
//или.
• За oдобряване и запаметяване на Вашият избор, натиснете ОК.
3 Натиснете бутона MENU, за връщане към нормален ТВ режим.
• Яркост ,Цветност ,Острота могат да се се изменят само при избор на режим на образ
«Личен».
• Тоналност е само на разположение за цветната система NTSC (напр. американски
видео касети).
• За да възвърнете фабрично нагласената настройка на образа, изберете Нулиране и
натиснете ОК.
НАСТРОЙКА НА КАРТИНАТА
Менюто «Настройка на Картината» Ви
позволява да промените настройката на
образа.
За целта: след като изберете опцията,
OK
която желаете да промените,
натиснете. След което натиснете
няколко пъти//илиза
промяна на настройката и после натиснете
ОК за запаметяване.
Това меню също Ви позволява да
промените режима на образа в зависимост
от типа на програмата която гледате:
Наживо (за пpoгpaми излъчвaни нa
живo, DVD и цифpoвo пpиeмaни
пpoгpaми).
Личен (за индивидуални предпочитания).
Филми (за филми).
чpез двaтa говopитeля нa телевизора симулира звук кaтo oт чeтиpи говорителя,
винаги кoгaтo излъчeния cигнал от пpeдaвaтeлнaтa cтaнция e «Dolby Surround».
Също можете да подобрите ефекта на звука включвайки допълнителен усилвател.
За повече детайли вижте в глава «Включване на външен аудио екип» на стр.19.
**Произведено с позволение на Dolby Laboratories. «Dolby», «Pro Logic» и символа на
двойното D са търговски марки на Dolby Laboratories.
продължава...
Система от менюта на екрана
10
Loading...
+ 94 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.