Sony KDL-32BX310 Schematic

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:

SERVICE MANUAL

MODEL NAME REMOTE COMMANDER DESTINATION

KDL-32BX310

RM-YD072 US/CND

AZ2-UZ

CHASSIS

LEVEL

CONFIDENTIAL

SERVICE MANUAL

INTERNAL ONLY

ORIGINAL MANUAL ISSUE DATE: 8/2011

REVISION DATE SUBJECT

8/15/2011 Original Manual Release Date

9-883-870-51

LCD DIGITAL COLOR TV

KDL-32BX310

SECTION TITLE PAGE

Safety-Related Component Warning .......................................................................................................................................................................... 3

Safety Check-Out

Specications

Licensing Information

.......................................................................................................................................................................................................5

.................................................................................................................................................................................................7

SECTION 1: DIAGRAMS

1-1. Circuit Boards Location ...................................................................................................................................................................................... 8

1-2. Printed Wiring Boards and Schematic Diagrams Information ............................................................................................................................ 8

1-3. Schematics and Supporting Information ............................................................................................................................................................ 9

A Board Schematic Diagram (1 of 14) A Board Schematic Diagram (2 of 14) A Board Schematic Diagram (3 of 14) A Board Schematic Diagram (4 of 14) A Board Schematic Diagram (5 of 14) A Board Schematic Diagram (6 of 14) A Board Schematic Diagram (7 of 14) A Board Schematic Diagram (8 of 14) A Board Schematic Diagram (9 of 14) A Board Schematic Diagram (10 of 14) A Board Schematic Diagram (11 of 14) A Board Schematic Diagram (12 of 14) A Board Schematic Diagram (13 of 14) A Board Schematic Diagram (14 of 14) Power Supply Board Schematic Diagram (1 of 2) Power Supply Board Schematic Diagram (2 of 2) H Board Schematic Diagram

SECTION 2: EXPLODED VIEW

2-1. LCD Panel Module and Rear Cover ................................................................................................................................................................. 28

2-2. LCD Panel Module Exploded View .................................................................................................................................................................. 29

2-3. Connectors ....................................................................................................................................................................................................... 30

2-4. Accessories and Packing ................................................................................................................................................................................. 30

2-5. Miscellaneous ..................................................................................................................................................................................................30

2-6. Optional Accessories ........................................................................................................................................................................................ 30

2-7. Remote Commander ........................................................................................................................................................................................ 30

2-8. Screws .............................................................................................................................................................................................................30

................................................................................................................................................................................................... 8

................................................................................................................................................................9

..............................................................................................................................................................10

.............................................................................................................................................................. 11

..............................................................................................................................................................12

..............................................................................................................................................................13

..............................................................................................................................................................14

..............................................................................................................................................................15

..............................................................................................................................................................16

..............................................................................................................................................................17

............................................................................................................................................................18

............................................................................................................................................................ 19

............................................................................................................................................................20

............................................................................................................................................................21

............................................................................................................................................................22

............................................................................................................................................24

...........................................................................................................................................25

............................................................................................................................................................................27

......................................................................................................................................................................................28

SECTION 3: SOFTWARE UPDATE AND SERVICE ADJUSTMENTS

3-1. Updating the Software ...................................................................................................................................................................................... 31

3-2. Accessing Service Mode .................................................................................................................................................................................. 32

3-3. Accessing the Self Diagnosis History ............................................................................................................................................................... 32

SECTION 4: ELECTRICAL PARTS LIST

........................................................................................................................................................................ 33

........................................................................................................................... 31

KDL-32BX310

SAFETY-RELATED COMPONENT WARNING

KDL-32BX310

There are critical components used in LCD color TVs that are important for safety. These components are identied with shading and

mark on the schematic diagrams and the electrical parts list. It is essential that these critical parts be replaced only with the part number

specied in the electrical parts list to prevent electric shock, re, or other hazard.

NOTE: Do not modify the original design without obtaining written permission from the manufacturer or you will void the original parts and labor guarantee.

USE CAUTION WHEN HANDLING THE LCD PANEL

When repairing the LCD panel, be sure you are grounded by using a wrist band.

When installing the LCD panel on a wall, the LCD panel must be secured using the 4 mounting holes on the rear cover.

To avoid damaging the LCD panel:

Údo not press on the panel or frame edge to avoid the risk of electric shock. Ú

do not scratch or press on the panel with any sharp objects.

Ú do not leave the module in high temperatures or in areas of high humidity for an extended period of time. Ú do not expose the LCD panel to direct sunlight. Ú avoid contact with water. It may cause a short circuit within the module. Ú disconnect the AC adapter when replacing the backlight (CCFL) or inverter circuit.

(High voltage occurs at the inverter circuit at 650Vrms.)

always clean the LCD panel with a soft cloth material.

Ú use care when handling the wires or connectors of the inverter circuit. Damaging the wires may cause a short. Ú protect the panel from ESD to avoid damaging the electronic circuit (C-MOS).

LEAKAGE CURRENT HOT CHECK CIRCUIT

KDL-32BX310

e circuit boards used in these models have been processed using

Lead Free Solder. The boards are identified by the LF logo located close to the board designation e.g. H1 etc [ see example ]. The servicing of these boards requires special precautions to be taken as outlined below.

example

It is strongly recommended to use Lead Free Solder material in order to guarantee optimal quality of new solder joints. Lead Free Solder is available under the following part numbers :

KDL-32BX310

r e b m u n t r a P r e t e m a i D s k r a m e R

9 1 - 5 0 0 - 0 4 6 - 7m m 3 . 0g K 5 2 . 0

0 2 - 5 0 0 - 0 4 6 - 7m m 4 . 0g K 0 5 . 0

1 2 - 5 0 0 - 0 4 6 - 7m m 5 . 0g K 0 5 . 0

2 2 - 5 0 0 - 0 4 6 - 7m m 6 . 0g K 5 2 . 0

3 2 - 5 0 0 - 0 4 6 - 7m m 8 . 0g K 0 0 . 1

4 2 - 5 0 0 - 0 4 6 - 7m m 0 . 1g K 0 0 . 1

5 2 - 5 0 0 - 0 4 6 - 7m m 2 . 1g K 0 0 . 1

6 2 - 5 0 0 - 0 4 6 - 7m m 6 . 1g K 0 0 . 1

Due to the higher melting point of Lead Free Solder the soldering iron tip temperature needs to be set to 370 degrees centigrade. This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics.

KDL-32BX310

SAFETY CHECK-OUT

To Exposed Metal Parts on Set

0.15 µF

Earth Ground

AC Voltmete

(0.75V)

KDL-32BX310

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer:

1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges.

2. Check the interboard wiring to ensure that no wires are “pinched” or touching high-wattage resistors.

3. Check that all control knobs, shields, covers, ground straps, and

mounting hardware have been replaced. Be absolutely certain that you have replaced all the insulators.

4. Look for unauthorized replacement parts, particularly transistors,

that were installed during a previous repair. Point them out to the customer and recommend their replacement.

5. Look for parts which, though functioning, show obvious signs of

deterioration. Point them out to the customer and recommend their replacement.

6. Check the line cords for cracks and abrasion. Recommend the replacement of any such line cord to the customer.

7. Check the antenna terminals, metal trim, “metallized” knobs, screws,

and all other exposed metal parts for AC leakage. Check leakage as described below.

The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a

return to chassis, must not exceed 0.5 mA (500 microamperes).

Leakage current can be measured by any one of three methods.

1. A commercial leakage tester, such as the Simpson 229 or RCA

WT-540A. Follow the manufacturers’ instructions to use these instructions.

2. A battery-operated AC milliampmeter. The Data Precision 245 digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75

V, so analog meters must have an accurate low voltage scale.

The Simpson’s 250 and Sanwa SH-63TRD are examples of passive VOMs that are suitable. Nearly all battery-operated digital multimeters that have a 2 VAC range are suitable (see Figure A).

How to Find a Good Earth Ground

The cover-plate retaining screw on most AC outlet boxes is at

earth ground. Verify the AC outlet box retaining screw ground by connecting a 60-to 100-watt trouble-light (not a neon lamp) between the hot side of the receptacle and the retaining screw. Try

both slots, if necessary, to locate the hot side on the line; the lamp

should light at normal brilliance if the screw is at ground potential (see Figure B).

Leakage Test

KDL-32BX310

Tr ouble Light

AC Ou tlet Box

Figure A. Using an AC voltmeter to check AC leakage. Figure B. Checking for earth ground.

SPECIFICATIONS

System

Television systemNTSC: American TV standard

Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69

Panel systemLCD (Liquid Crystal Display) Panel

Input/Output jacks

CABLE/ANTENNA 75-ohm external terminal for RF inputs

COMPONENT IN Y P

HDMI IN 1/2 HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p

DIGITAL AUDIO OUT (OPTICAL)

PC/HDMI IN 1 AUDIO INPUT Stereo mini jack, 500 mVrms, (Ty pical) / Impedance: 47 kilohms

Power and others

Power requirement 120 V AC, 60 Hz Power consumption

in use in standby Less than 0.3 W with 120 V AC

Screen size (inches measured diagonally)

Speaker/Full range (2) (mm)

Dimensions with stand (mm)

wall-mount hole pattern (mm)

Mass with stand (kg)

Supplied accessories Remote control RM-YD072 (1)/Size AA batteries (2)/Operating Instructions (1)/Quick Setup Guide

Optional accessories Connectin g cables / Support Belt Kit / Wa ll-Mount Bracket: SU-WL500

(inches)

without stand (mm)

without stand (kg)

(inches)

•Optional accessories availability depends on its stock.

•Design and specications are subject to change without notice.

ATSC (8VSB terrestrial): ATSC compliant 8VSB QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)

Analog Cable: 1 - 135 / Digital Cable: 1 - 135

W 6 + W 6 tuptuo rekaepS

AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms

B PR (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / PB : 0.7 Vp-p, 75 ohms

R : 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p

AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms

Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24bits, Dolby Digital

PC Input (see Operating Instruction manual) PCM/Dolby Digital optical signal

See the PC Input Signal Reference Chart for PC and HDMI IN in the Operating Instruction manual.

GEPJBSU

(inches)

(lb.)

(1)/Warranty Card (1)/Safety and Regulatory Booklet (1)/Software License (1)/Stand installation guide (1)/Table-To p Stand (1)/Screw (3)/Attachment Parts (2)

evitagen cnys ,decnalabnu smho 57 ,p-pV 1 :OEDIVNI OEDIV

evitisop ,smho 57 ,p-pV 7.0 ,BGR golana ,nip-51 bus-DNI CP

84 W

31.5

(32 class)

30 × 100

/5 × 4)

772 × 526 × 207

/2 × 20 3/4 × 8 1/

772 × 484 × 82

/2 × 19 1/8 × 3 1/4

200 × 300

6.6

14.6

6.1

13.5

)lacitrev( senil 867 × )latnoziroh( stod 883,1 noituloser yalpsiD

in Operating Instruction manual) margaid ot refer :htgnel( 6M)mm( ezis wercs tnuom-llaw

KDL-32BX310

LICENSING INFORMATION

Macintosh is a trademark of Apple Inc., registered in the U.S. and other countries.

HDMI, the HDMI logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Blu-ray Disc is a trademark.

“BRAVIA” and and are trademarks or registered marks of Sony Corporation.

“PlayStation” is a registered trademark and “PS3” is a trademark of Sony Computer Entertainment Inc.

KDL-32BX310

1-1. CIRCUIT BOARDS LOCATION

KDL-32BX310

SECTION 1: DIAGRAMS

Power Supply Board

A Board

1-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS INFORMATION

All capacitors are in µF unless otherwise noted. pF : µµF 50WV or less are not indicated except for electrolytics and tantalums.

All electrolytics are in 50V unless otherwise specied.

All resistors are in ohms. kΩ=1000Ω, MΩ=1000kΩ

Indication of resistance, which does not have one for rating electrical power, is as follows: Pitch : 5mm Rating electrical power :

W in resistance, 1/

W and 1/

W in chip resistance.

: nonammable resistor

: fusible resistor

: internal component

: panel designation and adjustment for repair

: earth ground

: earth-chassis

All variable and adjustable resistors have characteristic curve B, unless otherwise noted.

Readings are taken with a color-bar signal input.

Readings are taken with a 10MΩ digital multimeter.

Voltages are DC with respect to ground unless otherwise noted.

Voltage variations may be noted due to normal production tolerances.

KDL-32BX310

All voltages are in V.

S : Measurement impossibility.

: B+line.

: B-line. (Actual measured value may be different).

: signal path. (RF)

Circled numbers are waveform references.

The components identied by shading and ! symbol are critical for safety. Replace only with part number specied.

The symbol indicates a fast operating fuse and is displayed on the component side of the board. Replace only with fuse of the same rating as marked.

Les composants identies per un trame et une marque securite. Ne les remplacer que par une piece portant le numero specie.

Le symbole indique une fusible a action rapide. Doit etre remplace par une fusible de meme yaleur, comme maque.

sont critiques pour la

1-3. SCHEMATICS AND SUPPORTING INFORMATION

A BOARD SCHEMATIC DIAGRAM (1 OF 14)

U100A

U100A ZR39748BGCG

ZR39748BGCG

S0 Memory I/F

D D

C C

S0_DQ15 S0_DQ14 S0_DQ13 S0_DQ12 S0_DQ11 S0_DQ10 S0_DQ9 S0_DQ8 S0_DQ7 S0_DQ6 S0_DQ5 S0_DQ4 S0_DQ3 S0_DQ2 S0_DQ1 S0_DQ0

S0_UDM S0_LDM

AA15

AA9

AA16

AB9 AB11 AB14 AA10 AB16 AA13

AA8 AB12

AA7

AB7 AA12

AB8 AB13

AB10 AA11

V13

V17

U17

V16

S0 Memory I/F

S0DAT15 S0DAT14 S0DAT13 S0DAT12 S0DAT11 S0DAT10 S0DAT9 S0DAT8 S0DAT7 S0DAT6 S0DAT5 S0DAT4 S0DAT3 S0DAT2 S0DAT1 S0DAT0

S0DQM1 S0DQM0

S0VREF

RDRIVER

RDRIVER50

RTERM

null

DRAM POWER DDRV

VCC1_8

L100

B B

L100 120R-100MHZ_0805

120R-100MHZ_0805

C100

C100 22U_6.3V_M

22U_6.3V_M

0805_X5R

1 2

DDR_VCC1_8

C101

0.1U_10V_K

0402_X7R

TP100TP100

DDR_VCC1_8

C103

C103 1000P_50V_K

1000P_50V_K

0402_X7R

S0ADR12 S0ADR11 S0ADR10

S0ADR9 S0ADR8 S0ADR7 S0ADR6 S0ADR5 S0ADR4 S0ADR3 S0ADR2 S0ADR1 S0ADR0

S0BS2 S0BS1 S0BS0

S0DQS1N S0DQS1P S0DQS0N S0DQS0P

S0RASN S0CASN

S0WEN

S0CLKN

S0CLKP

S0CKE

S0ODT

AB1 Y22 AB4 AA1 AA22 AB2 AB22 AA2 AA21 AB3 AB21 AA3 AA20 AA5 AA4 AB5

AB15 AA14 AB17 AA17

AA19 AB20 AB6

AA18 AB18 AA6

AB19

C104

0.1U_10V_K

0402_X7R

1 2

S0_ODT

C105

0.1U_10V_K

0402_X7R

S0_A12 S0_A11 S0_A10 S0_A9 S0_A8 S0_A7 S0_A6 S0_A5 S0_A4 S0_A3 S0_A2 S0_A1 S0_A0 S0_BA2 S0_BA1 S0_BA0

S0_UDQSN S0_UDQS S0_LDQSN S0_LDQS

S0_RASN S0_CASN S0_WEN

S0_CKN S0_CK S0_CKE

R102

R102 100_F 0603

100_F 0603

Place under U101

C106

0.1U_10V_K

0402_X7R

Place R102 close to U101

C107

0.1U_10V_K

0402_X7R

DDR_VCC1_8

C108

0.1U_10V_K

0402_X7R

R100

R100 100_F 0603

100_F 0603

1 2

C109

C109 22U_6.3V_M

22U_6.3V_M

0805_X5R

1 2

R101

R101 100_F

100_F

0603

S0_UDQS S0_UDQSN S0_LDQS S0_LDQSN S0_UDM S0_LDM

DDR_VCC1_8

S0_DQ0 S0_DQ1 S0_DQ2 S0_DQ3 S0_DQ4 S0_DQ5 S0_DQ6 S0_DQ7 S0_DQ8 S0_DQ9 S0_DQ10 S0_DQ11 S0_DQ12 S0_DQ13 S0_DQ14 S0_DQ15

U101

DQ0

DQ1

DQ2

DQ3

DQ4

DQ5

DQ6

DQ7

DQ8

DQ9

DQ10

DQ11

DQ12

DQ13

DQ14

DQ15

NC_1

NC_2

UDQS

UDQS#

LDQS

LDQS#

UDM

LDM

VREF

CKE

VDD_1

VDDQ_1

VDDQ_2

VDDQ_3

VDDQ_4

VDDQ_5

VDD_2

VDDQ_6

VDDQ_7

VDDQ_8

VDDQ_9

VDDQ_10

VDDL

VDD_3 VDD_4M9VSS_4

VDD_5

SDRAM_BGA-84P_512MB

NT5TU32M16DG-BD

A10/AP

VSSQ_1 VSSQ_2 VSSQ_3 VSSQ_4 VSSQ_5

VSSQ_6 VSSQ_7 VSSQ_8 VSSQ_9

VSSQ_10

A11

A12 NC_6 NC_4 NC_5

BA0 BA1

NC_3

CK CK# CS#

CAS#

ODT

RAS#

WE#

VSS_1

VSS_2

VSS_3

VSSDL

VSS_5

M2 P7 R2 R8 R3 R7 L2 L3 L1

K8 L8 L7 K9 K7 K3 A3 A7 B2 B8 D2 D8 E3 E7 F2 F8 H2 H8

J3 J7

N1 P9

S0_A0 S0_A1 S0_A2 S0_A3 S0_A4 S0_A5 S0_A6 S0_A7 S0_A8 S0_A9 S0_A10 S0_A11 S0_A12

S0_BA0 S0_BA1 S0_BA2 S0_CK S0_CKN

S0_CASN S0_ODT S0_RASN S0_WENS0_CKE

KDL-32BX310

DDR_VCC1_8

C117

0.1U_10V_K

0402_X7R

C111

0.1U_10V_K

0402_X7R

C110

C110 1000P_50V_K

1000P_50V_K

0402_X7R

DDR_VCC1_8

A A

C118

0.1U_10V_K

0402_X7R

C112

C112 1000P_50V_K

1000P_50V_K

0402_X7R

C119

0.1U_10V_K

0402_X7R

C113

0.1U_10V_K

0402_X7R

C114

C114 1000P_50V_K

1000P_50V_K

0402_X7R

C115

0.1U_10V_K

0402_X7R

C116

C116 22U_6.3V_M

22U_6.3V_M

0805_X5R

1 2

TV Product Business Division / R&D Department

TV Product Business Division / R&D Department CCPBG/ Hon-Hai Precision IND. CO., LTD

CCPBG/ Hon-Hai Precision IND. CO., LTD

CCPBG/ Hon-Hai Precision IND. CO., LTD Foxconn Technology Group

Foxconn Technology Group

Title

DDR2

Size Document Number Rev

TINA1

Date: Sheet

Foxconn Technology Group

2 16Friday, June 24, 2011

KDL-32BX310

A BOARD SCHEMATIC DIAGRAM (2 OF 14)

U100B

U100B ZR39748BGCG

ZR39748BGCG

D D

EJTAG

UART

I2C

C C

SPI

25M

null

USB2.0

B B

A A

USB2.0

SIO I/F

TDI TDO TMS TCK

UART1TX

UART1RX

I2C0C I2C0D I2C1C I2C1D

SPI_DO

SPI_DI

SPI_CLK SPI_SEL0 SPI_SEL1

SPI_HOLD

CLKOUT_25M

CLKIN_25M

USB_DN

USB_DP

USB_REXT

USB_ATEST

D19 D18 C18 D20

F20 E20

F4 F3 A21 A22

C22 B22 B21 C21 Y21 C20

A8 B8

W21 W22 T18 V19

EJTDI EJTD0 EJTMS EJTCK

R185

R185 100_F 0402

100_F 0402

1 2 1 2

R184 NC/100_F

NC/100_F

1 2

R190 100_F 0402R190 100_F 0402 R191

1 2

100_F

D157 EZAEG2A50AX_VR

D158 EZAEG2A50AX_VR

R182 100_F0402R182 100_F0402

1 2 1 2

R183 100_F0402R183 100_F0402

C151

12P_50V_J

0402_NPO

1 2

VSW_CPR

0402R184

0402

I2C_0_SCL I2C_0_SDA

I2C_1_SCL

0402R191

0402

I2C_1_SDA

1 2

null

1 2

R166 100_F0402R166 100_F0402

Y150

25MHZ_6.3P_15PPM

SONY_1-814-389-11

R167

6.04K_F

0402

10U_10V_M

0805_X5R

VCC3_3

RESETN[5,8,11]

VCC_ERR_DET VSW_CY_DET

C156

R172

1 2

10K_J

0402

R150 NC/0_F0402R150 NC/0_F0402

1 2 1 2

R151 NC/0_F0402R151 NC/0_F0402

1 2

R152 NC/0_F0402R152 NC/0_F0402

1 2

R153 NC/0_F0402R153 NC/0_F0402

1 2

R154 NC/47_J0402R154 NC/47_J0402

Close to U100

TP151TP151

TP150TP150

1 2

R161 4.7K_J0402R161 4.7K_J0402

1 2

R162 4.7K_J0402R162 4.7K_J0402

1 2

R159 4.7K_J0402R159 4.7K_J0402 R160 4.7K_J0402R160 4.7K_J0402

1 2

SPI_WR SPI_RD SPI_CLK SPI_CS_n

Close to U100

Crystal Y1

C152

12P_50V_J

0402_NPO

50ppm 0-70C

Add a GROUND guard to avoid ESD

nullU151

null

USB POWER

VIN

GND2FLG#

CHANGE TO CURRENT LIMIT TO 0.5A

C153

0.1U_10V_K

0402_X7R

U151 FP6861S5GTR

FP6861S5GTR

USB_OC_N

VCC3_3

VOUT

C157

1206_X5R

47U_6.3V_M

USB_PEN_N

R158

R157

R156

1 2

1206_X5R

R157

1 2

VCC3_3

R163

0_J 0603

1 2 1 2

R171

0_J

C155

0.1U_10V_K

0402_X7R

Close to CN151

NC/4.7K_J0402

NC/4.7K_J0402 NC/1K_J0402

NC/1K_J0402 NC/1K_J0402

NC/1K_J0402

0603R171

0603

VCC5_1_USBVCC5_0_USB

R155 NC/1K_J0402R155 NC/1K_J0402

1 2

D150 NC/EZAEG2A50AX_VR nullD150 NC/EZAEG2A50AX_VR null D151 NC/EZAEG2A50AX_VR nullD151 NC/EZAEG2A50AX_VR null D152 NC/EZAEG2A50AX_VR nullD152 NC/EZAEG2A50AX_VR null D153 NC/EZAEG2A50AX_VR nullD153 NC/EZAEG2A50AX_VR null D154 NC/EZAEG2A50AX_VR nullD154 NC/EZAEG2A50AX_VR null

C154

47U_6.3V_M

1206_X5R

C158 47U_6.3V_M

VCC3_3

UART0_RX UART0_TX

1 2 3 4 5 6 7 8 9

CN150

SMDFIX2

NC/HEADER CONN_9P

FOX_HS7209E

SMDFIX1

10 11

For Development Only

Close to CN150

U150

R164

NC/4.7K_J

0402

D155

null

SPI_CS_n SPI_RD

R165

4.7K_J

0402

1 2

VCC5_1_USB

D156

null

EZAEG2A50AX_VR

EZAEG2A50AX_VR EZAEG2A50AX_VR

EZAEG2A50AX_VR

W#/VPP

VSS

FLASH_SO8W- 8P_32MBIT

W25Q32BVSSI G

Near of U100

L151

L151 100R-100MHZ_0805

100R-100MHZ_0805

VCC

HOLD#

8 7 6

1 2

V-

V+

3 4

R170

4.7K_J 0402

SPI_CLK SPI_WR

PTH1

PTH3

PTH1

PTH3

VCC

GND

PTH2PTH4

UART0_TX

UART0_RX

USB_OC_N

USB_PEN_N

I2C_0_SCL

I2C_0_SDA

I2C_1_SCL

I2C_1_SDA

VSW_CY_DET

VSW_CPR

VCC3_3

C150

0.1U_10V_K

0402_X7R

3/28 Change the USB connect or from 2N-000400D-F KG0 to 2N-0004016-MKG0.

Jack.

CN151

CN151 USB CONN_4P

USB CONN_4P

FOX_UB11121-4GD1-4F

TV Product Business Division / R&D Department

TV Product Business Division / R&D Department CCPBG/ Hon-Hai Precision IND. CO., LTD

CCPBG/ Hon-Hai Precision IND. CO., LTD

CCPBG/ Hon-Hai Precision IND. CO., LTD Foxconn Technology Group

Foxconn Technology Group

Title

SIO I/F

Size Document Number Rev

TINA1

Date: Sheet

Foxconn Technology Group

UART0_TX [ 6,11]

UART0_RX [6,11]

USB_OC_N [10]

USB_PEN_N [10]

I2C_0_SCL [11]

I2C_0_SDA [11]

I2C_1_SCL [5,8,9]

I2C_1_SDA [5,8,9]

VSW_CY_DET [6]

VSW_CPR [6]

UART0_TX

UART0_RX

1 2

3 16Friday, June 24, 2011

R168

4.7K_J

R169

4.7K_J

VCC3_3

0402R168

0402

0402R169

0402

KDL-32BX310

+ 23 hidden pages

Sony KDL-32BX310 Schematic

TABLE OF CONTENTS

SAFETY-RELATED COMPONENT WARNING

SAFETY CHECK-OUT

SPECIFICATIONS

LICENSING INFORMATION

1-1. CIRCUIT BOARDS LOCATION

SECTION 1: DIAGRAMS

1-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS INFORMATION

1-3. SCHEMATICS AND SUPPORTING INFORMATION

A BOARD SCHEMATIC DIAGRAM (1 OF 14)

A BOARD SCHEMATIC DIAGRAM (2 OF 14)