Sony KD-77A9G, KD-65A9G, KD-55A9G User Manual

Television
Reference Guide
4-748-703-11(1)
KD-77A9G / 65A9G / 55A9G
Note
To a t ta ch t he Ta ble -Top Stand, refer to the Setup Gui
de.
Table of Contents
Safety Information . . . . . . . . . . . . . . . . . . . . . 2
Parts and Controls . . . . . . . . . . . . . . . . . . . 5
Controls and Indicators . . . . . . . . . . . . . . . . . 5
Using Remote Control . . . . . . . . . . . . . . . . 6
Remote Control Parts Description. . . . . . . . . 6
Connection Diagram . . . . . . . . . . . . . . . . . 8
Installing the TV to the Wall . . . . . . . . . . 10
Using the optional Wall-Mount Bracket
(SU-WL850 or SU-WL450) . . . . . . . . . . . . . . 10
Troubleshooting . . . . . . . . . . . . . . . . . . . . 12
Troubles and Solutions. . . . . . . . . . . . . . . . . 12
Specifications . . . . . . . . . . . . . . . . . . . . . . 13
Introduction
Thank you for choosi ng this Sony product. Before operating the TV, please read this manual thoroughly and retain it for fu ture ref erence.
• Before operating the TV, please read the “Safety Information” (page
2).
• Read the sup plied Safety Information for additional safety information.
• Instructio ns about “Installing the TV to the Wall” are included within this TV’s instruction manual.
• Imag es and illust rations used in t he Setup Guid e and this manual are for reference only and may differ from the actual product.
Help
Find more troubleshooting and other useful information directly from your TV. Press HELP on the remote control to display a list of top ics, or to search by keyword.
Help Guide (Manual)
For more detailed information, select [He lp Guide] from the Hel p men u on yo ur TV. You c an al so che ck the Help G uide from your PC or smartphone (information provided on the back cover of this manual).
Location of the identification label
Labels for the TV Model No. and Power Supply rating are located on the rear of the TV. They can be found by removing the stand cover .

Safety Information

Installation/Set-up
Install and use the TV s et in accordance with the instructio ns below in order to avoid any risk of fire, electric shock or damage and/or in juries.
Installation
• The TV se t should be insta lled near an easily accessible AC power outlet (mains socket).
• Place the TV set o n a stable, level surface to prev ent it from falling over an d causing personal inju ry or property damag e.
• Install the TV where it cannot be pulled, pushed, or knocked ov
er.
• Insta ll the TV so that the TV’s Table-Top Stand does not protrude out from the TV stand (not supplied). If the TV’s Table-Top Stand protrudes out from the TV stand, it may cause TV set to top ple over, fall down, and cause personal injury or damage to the TV.
GB
2
• For safety reasons, be sure to attach the centre covers to the
Screw (M6)
Wall-M ount Bracket
9 mm - 13 mm
TV’s rear cover
M4 screw (not supplied)
1.5 N·m {15 kgf·cm}
Screw (not supplied)
6 mm - 7 mm
Cord (not supplied)
30 cm
10 cm
10 cm
10 cm
1 cm
Leave at least this space around the set.
30 cm
10 cm
10 cm
Leave at least this space around the set.
6 cm
rear of the TV when TV in Table-Top condition.
• Only qualified service personnel should carry out wall-mount installations.
• For safety reasons, it is strongly recommended that yo u use S
ony accessories, including:
Wall-Mou nt Bracket SU-WL850Wall-Mou nt Bracket SU-WL450
• Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the Wall-Moun t Bracket to the TV set. The supplied screws are designed as indicated by illustration when measured from the attaching surface of the Wall-Mount Bracket. The diameter and length of the screws differ depending on the W
all-Mount Bracket model. Use of screws other than t hose supplied may result in internal damage to the TV se t or cause it to fall, etc.
Topple prevention (Except models with supplied support belt kit)
Tran spo rti ng
• Before transporting the TV set, disconnect all cables.
• Two or three people are needed to transport a large TV set.
• When transpo rting the TV set by han d, hold it as shown below. Do not put stress on the panel and the frame around the screen.
• When hand ling or mounting the
V set, do not lay down the TV.
T
• When transpo rting the TV set, do n
ot subject it to jolts or excessive vi bration.
• When transpo rting the TV set for repairs or when moving, pack it
using the original carton and packing material.
Ventilation
• Never cover the ventilation holes or insert anything into the cabin et.
• Leave space around the TV set as shown below.
• It is strongly recomme nded that you use a Sony Wall-Mo unt Bracket in order to provide adequate air circulation.
Installed on the wall
Installed with stand
GB
3
• To ensure proper ventilation and prevent the collection of dirt or
Do not block the air circulation area.
Air circulation
Wall
Air circulation is blocked.
Wall
dust: Do not l ay the TV set flat, install ups ide down, backwards, or
sideways.
D
o not place the TV set on a shelf, rug, bed or in a closet.
Do not cover the T V set with a cloth, suc h as curtains, or items
such as newspapers, etc.
Do not in stall the TV set as shown b elow.
Notice for customer in UAE
TRA
REGISTERED No: ER63944/18 DEALER No:
DA0065531/11

Protecting the TV Screen (OLED TV)

Precautions to Protect the Screen from Damage
Image retention
OLED TV‘s are susceptible to image retention (b urn-in) due to the characteristics of the m aterials used. Image retention may occur if images are displayed in the same location on the screen repeatedly or over extended period s of time. This is not a malfunction of the TV. Avoid displaying images that may cause image rete ntion.
The following are examples of images that may cause image retention:
• Content with black bars either on the top and bottom and/or the left and ri ght sides of the screen. (for example, Letterboxed, 4:3 screen, Standard defini tion)
• Static images suc h as photos.
• Video gam es that might have static content in some part of the s
creen.
• On-screen menus, programme guides, channel logos etc.
• Static content from ap plications.
• On-screen tickers , such as those used for n ews and headlines.
To reduce the risk of image retention:
• Sony recomm ends that you turn off the TV normally by pressing the power button on the remote control or the TV.
• Fill the screen by changing [Wide mode] to eliminate the black bars. Select [Wide m ode] other than [Norm al].
• Turn off the OSD (On Screen Display) by pressing the / button, and turn off th e menus from connected eq uipment. For d
etails, refer to the instructio n manuals for the connected
equipment.
• Avoid display ing static images with br ight colours (including white), clocks or logos on any portion of the screen.
• Set the picture settings based on the ambient conditions. The Standard Picture is recommended for hom e use and when viewing content that ofte n displays the station logo s, etc.
The TV has fo llowi ng feat ures to help re duce/p revent imag e re
tentio n.
Panel ref resh
Panel refresh will automatically run to a djust the uniformity of the TV screen after it has been in use for long periods of time. Panel refresh can also be performed manually and should only be used if image retention is very noticeable or you see the following message: [Panel refresh did not finish…]
Caution:
• The Panel refresh function m ay affect the panel. A s a reference, perform the Panel refresh only o nce a year, do not perform it more than once a year as it may affect the usable life of the panel.
• Panel refresh takes about one hour to complete.
• A white line may be displayed on the screen during the Panel re
fresh, this is not a malfunc tion of the TV.
• Panel refresh will only work when the room temperature is between 10 ºC and 40 ºC.
Pixel shift
Automatically moves the image on the screen to prevent image retent ion.
Other feature
The screen brightness is automatically reduced when displaying still image s, clocks, bri ght colours or lo gos etc.
GB
4

Parts and Controls

ȩ
ȬȫȪ

Controls and Indicators

 (Power) / + / –
When the TV is off,
Press to
When the TV is on,
Press and hold to Press then press + or – button to:
•Adjust the volume.
• Select the channel.
• Select the input source of TV.
Remote Control sensor*1 /
Light sensor*
The illumination LED lights up or blinks according to the status of the TV. For more information, refer to the Help Gu
power on.
repeatedly to change the function,
ide.
power off.
1
/ Illumination LED
Built-in MIC*2*
Use the hands-free built-in microphone for voice search. To enable the built-in MIC, follow the on-screen instructions when you press the button.
Built-in MIC LED
The built-in MIC LED lights up in amber when the built-in MIC is enabled. The built­in MIC LED can be disabled.*
*1 Do not place anything near the sensor.
*2 The voice search requires an Internet connection.
The voice search with the built-in MIC is available only on limited region/country/language. Standby power consumption will increase because the built-in MIC is always listening when the voice search with the built-in MIC is enabled.
*3 For more information, see the Online Help Guide
(page 2).
3
3
GB
5
Loading...
+ 11 hidden pages