Sony IJ1001SNBT User Manual
Energy Storage System “IJ1001SNBT”
Open the energy storage server using screw driver and install the lithium ion battery module
Fixing the top cover.
Insert the antenna cable
Top cover
Copyright Sony Energy Devices Corporation
38
Energy Storage System “IJ1001SNBT”
Open the energy storage server using screw driver and install the lithium ion battery module
Fixing the top cover.
Rear
Front
Screw：⑥Screw（M4×10㎜ Black）×4pcs
Copyright Sony Energy Devices Corporation
39
Energy Storage System “IJ1001SNBT”
Set the outer enclosure to the wall
Make a hole for conduit inside the bellow area.
177.8㎜(7in)25.4㎜(1in)
Hole(1.06in)
25.4㎜(1in) 304.8㎜(12in)
Copyright Sony Energy Devices Corporation
40
Energy Storage System “IJ1001SNBT”
Set the outer enclosure to the wall
Fixing the outer enclosure to the wall 4 bolts.
Bolt :
For Wood Wall Diameter 3/8 inch
Length : 3-1/4 inch
For Concrete Diameter 3/8 inch
Length 3 inch
Ground
Keep the distance 30cm or more
From the ground
Copyright Sony Energy Devices Corporation
41
Energy Storage System “IJ1001SNBT”
Install the energy storage box into the outer enclosure
Install the energy storage server to the outer enclosure.
Install
Copyright Sony Energy Devices Corporation
42
Energy Storage System “IJ1001SNBT”
Install the energy storage box into the outer enclosure
Wiring 8 position bellow.
Copyright Sony Energy Devices Corporation
Completed photo
43
Loading...