Sony FD Trinitron WEGA KV-20FA210 Operating Instructions Manual
SON3t: i 4-1oo-519-21
FDTrinitron
WEG/
Operating Instructions
I KV-20FA210
© 2003 by Sony Corporation
WARNING
To reduce the risk of fire or electric shock, do not expose the
TV to rain or moisture.
This symbol is intended to alert the user to the
presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute, a risk of electric
shock to persons.
This symbol is intended to alert the user to the
presence of important oI_rating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Note to the CATV Installer
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall Ix, connected to the
grounding system of the building as close to the point of
cable entry as practical.
SAFETYPRECAUTIONS
[_1 Operate the TV only on 120 V AC.
[_1 One blade of the power plug is wider than the other for
safety purposes and will fit into the power outlet only one
way. If you are unable to insert the plug fully into the
ouNet, contact your dealer.
[_1 If any liquid or solid object falls into the TV, unplug it and
have it chocked by qualified personnel before operating it
further.
CAUTION
Whon using TV games, computers, and similar products
with your TV, keep the brighiness and contrast functions at _
low settings. If a fixed (non-moving) pattern is left on the
scr_n for long periods of time at a high brightness or
contrast setting, the image can be permanently imprinted
onto the scr_n. Continuously watching the same charmel
can cause the imprint of station logos onto the TV scr_n.
These types of imprints are not covered by your warranty
because they are the results of misuse.
NOTIFICATION
This equipment has been tested and found to com_pJly with
the limits for a Class B digital device pursuant to Part 15 of
the FCC Rules. The_ limits are designed to p_rovide
reasonable protection agjms t harmful interference in a
residential installation, this equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interfe:vnce with radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television :_ecep fion, which can be
determined by turning the eqtuipment off and on, the user is
encouraged to try to correct the interference by one or molv
of the following measures:
[_1 Reorient or relocate the receiving antennas.
[_1 Increase the separation between the equipment and
receiver.
[_1 Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
[_1 Consult the dealer or an experienced radio/TV technician
for help.
Protecting the TV
[_1 To prevent internal heat build-up, do not block the
ventilation openings.
[_1 Do not install the TV in a hot or humid place, or in a place
subiect to oxcessive dust or mechanical vibration.
Note on Caption Vision
This television receiver provides display of television closed
captioning in accordance with § 15.119 of the FCC rules.
Use of this television for other than private viewing of
programs broadcast on UHF or VHF or transmitted by cable
companies for the use of the general public may require
authorization from the broadcaster-cable company and/or
program owner.
Owner's Record
The model and serial numbers are located on the front cover
of this manual and at the rear of your TV.
Trademarks and Copyrights
ENERGY STAR ® is a registered mark.
AsanENERGYSTAR®Partner,Sonyhas
determinedthatthisproducto_roduct
modelmeetstheENERGYSTAR guidelines
forenergyefficiency.
®
WEGA , FD Irinitron, Caption V®ion, Dynamic Bass Response
S stem and Steady S(lund are registered trademarks of Sony
_rporation.
Licel_sed by BBE Sound, Inc. under USP 4638258.4482866 BBEand
BBE symbol are trademarks of BBE Sound, Inc.
"WOW. Surround, and the (e)_symbol are trademarks o'
SRS Labs Inc. WOW technology is incorporated under
license from SRS Labs, no."
IMPORTANT SAFEGUARDS
For your rotection please read these instructions
completely r, and keep this manual for future l_eference.
Carefully observe and comply w h all wamin s, cautions
and instructions placed on the set, or describe_in the
operating ins tPdctiol] $ 01"service manual.
WARNING
To guard against injury, the following basic safety
precautions should be observed in the instal at o_, use, and
_rvicing of the set.
Use
Power Sources
This set should be operated only from
the type of power source indicated on J
the serial/model plate. If you al_ not _ (:_
sm_e (If the type o_eleetrical power / ,_'_2 _
sup hed to your home consult our / _ ti_ '1
dea_er or local power c_}mpany. _'or [2_ _
fl_osc, sets designed to o crate from
battery power, refer to _e operating instructions.
Grounding or Polarization
This _t may be equipped with a polarized a terna ng curren
e pm_ a plug having one bade wider _an other). This
lug will fit into the power outlet only one wa . This is a safety
_ature. If you are unable to insert _e phlg fully into t _e "
outlet, try reversing the plug. If the pug still fails to fit, contact
your electrician to re lace tour obsolete outlet. Do _lot defeat
the safety purpose o_the polarized plug.
Forthe set with a polarizedACpower cord plug
This plug will fit into the ower out et
only one way. This is a safety feature. _._
If ou are unable to insert the plug / _ ,
fully into the outlet, try reve_ ng the _
plug. If the plug still fails to fit contact
your electrician to have a suitable outlet installed. Do not
defeat the safety purpose of the polarized plug by forcing it in.
Alternate Warning
Forthe set with a three-wire grounding type ACplu9
This plug will only fit into a
grounding-type power outlet. This is
a safety feature. If you are unable to
insert the plug into the outlet, contact
your electrician to have a suitable
outlet installed. Do not defeat the
safety purpose of tim grounding plug.
Overloading
Do not overload wall
outlets, extension
cords or convenience
receptacles beyond
their capacit , since
this can res _i in fire
or electric shock.
Always turn the set off when it is not to be used. When tile
set is left unattended and unused for long periods of time,
unplug it h'om the wall outlet as a precaut on against the
ossibillty of an internal malfunction that could create a fire
_azard.
Do not disconnect the antenna or the ower cord during a
hem,y storm. IA_htning may strike w_ile you aloe holding
the cable or curt L causing serious injury. Turn off your TV
and wait for tile weather to improve.
Object and Liquid Entry
Never push objects of any kind into the set
through the cabinet slots as they may touch
dangerous voltage points or short out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the set.
Attachments
DO not use atiachments not reco_qmended
by the manufacturer, as they may cause
hazards.
Do not place any objects, especially heavy
objects, on top of the set. The obi;,et mat
fall from tile set, causing injury.
Cleaning
Unplug the set from the wall out et before
cleaning or polishing it. Do not use quid
cleaners or aerosol cloaners. Use a cloth
lightly dampened with water for cleaning
the exterior of the set.
Ira snapping or popping sound from a TV set
_s continuous or frequent while the TV is
operating, unplug the TV and consult your
dealer or service technician. It is norrrml for
some TV sets to make occasional snapping or
popping sounds, particularly when being
turned on or off.
Installation
Alwa s use two or more people to lift or move tile set. Tile
set _s _eavy and the bottom surface s flat. Ser bUS injury can
result from trying to move the set by yourself alone, or h'om
tmsteady handling.
Install the set on a stable, level surface.
Water and Moisture
l_j not use power-line
operated sets near water --
for example, near a bathtub
washbowl, k tc _en sink, or
laundry tub, in a wet
basel_nb or near a
swimmJng pool, eta
Accessories
Do not place the set on
an unstable cart, stand,
tripod, bracket table,
or s _e f. The set may
fall, causing serious
in'ury to a child or an
a_ult, and serious
damage to the _,t. Use
only a cart or stand recommended by t _e manufacturer for the
specific model of TV. Any mounting of the product should
follow the manufacturer's instructions, and should use a
mounting accessory recommended b t_e manufacturer. An
appliance and cart combination sho_d be moved w th care
Qmck stops, excessive force and uneven surfaces nay cause
theappliance and cart combination to overturn.
Ventilation
The slots and openings in the cabinet and in the back or
bottom are plx)vided for necessary ventilation. To ensure
reliable o_eration of the ,set, and to. protect it from
overheatrng, these slots and openings must never be
blocked or covered.
Never cover the slots and openings ,a*
with a cloth or other materials. _j_
Never block the slots and openings
by placin _.the set on a bed, sofa, rug
or other similar surface.
Never place the set in a confined
space, such as a bookcase or built-in
cabinet, unless proper ventilation is
provided.
Do not place the set near or over a
radiator or heat register, or where it is
exposed to direct sunlight.
Power-Cord Protection
Do not allow an_ytlhing to rest on or roll over the
power cord, anddo not place the set where the
power cord is subject to wear or abuse.
Antennas
Outdoor Antenna Grounding
If an outdoor antenna is installed, follow the precautions
below. An outdoor antenna system should not be located in
the vicinity of overhead power lines or other electric light or
power circuits, or where it can come in contact with such
power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA
SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP
FROM CONTACTING SUCH POWER LINES OR
CIRCUITS AS CONTACT WITH THEM IS ALMOST
INVARIABLY FATAL.
Be sure the antenna sy:sstem is grounded so as to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in USA and
Section 54 of the Canadian Electrical Code in Canada
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
Antenna Grounding According to the NEC
Antenna Grounding Accol_ding to the National Electrical
Code, ANSI/NFPA 70.
ELECTRODE SyStEM
NEe. _ATtONAL _LECTRIC COOL I_EC A_T_¢L_ 2_0 Pa_ H)
Lightning
For added protection for this television receiver during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplu it from the wall outlet and
disconnect the antenna. This w_l prevent damage to the
receiver due to lightning and power-line surges.
Service
Damage Requiring Service
Unplug the set flx)m the wall outlet and refer servicing to
qualified service pe_'sonnel under the following conditions:
When the power cord or plug
damagedorfrayS.
is
If liquid has been spilled
into the set or ob ects have
fal en nto the product.
If the set has been exposed to
rain or water.
If the set has been subject to
excessive shock by bein
dropped, or the cabinet _as
been damaged.
If the set does not operate
normall, y when following theoperaBng.
instructions. Adlust only those controls
that are specified in the operating
instructions. Improper adjustment of
other, controls ma,y result.in dama_e and
will often requHe extensive work by a
qualified technician to restore the set to normal operation.
When the set exhibits a distinct change in
performance -- this indicates a need for service.
Servicing
Do not attempt to service the set yourself
since opening the cabinet may expose you
in dangerous volta_g e or other hazards. Refer
all servicing to qualified service personnel.
Replacement Parts
W_t_P_ceI_eetn_rtcSan_cer_rtqi_i_ed" be
writing that he has used replacement
arts specified by the manufacturer that
_ave the same characteristics as the
original parts. Unauthorized
substitutions may result in fire, electric
shock, or other hazards.
Safety Check
Upon completion of any service or _epairs to
the set, ask the service technician to perform
routine safety checks (as specified by the
manufacturer) to determine that the set is in
safe operating condition, and to so certify..
When the set reaches the end of its useful life,
improper disposal could result in a picture _
tube implosion. Ask aLqualified service
technician to dispose of the set.
Contents
I
Introduction
Introducing the FD Trinitron WEGA ®Features ......................................................................... 1
About this Manual .......................................................................................................................... 2
Batteries for the Remote Control .................................................................................................. 2
Front Panel Menu Controls ........................................................................................................... 2
Using the Remote Control
Remote Control Description .......................................................................................................... 3
Programming the Remote Control ............................................................................................... 5
Manufacturer's Codes .................................................................................................................... 6
Using your TV Remote Control with Other Equipment ........................................................... 7
Connecting Your TV
TV Rear Panel .................................................................................................................................. 9
Basic Connections ......................................................................................................................... 10
Dynamic Bass System Connection (Subwoofer) ...................................................................... 11
Connecting Additional Equipment ............................................................................................ 12
Using Basic Functions
Setting Up the TV .......................................................................................................................... 19
Quick Start to the Menus ............................................................................................................. 20
Using the Menus
How to Access Menus .................................................................................................................. 23
Using the Video Menu ................................................................................................................ 24
Picture Controls Menu (Video menu) ........................................................................................ 25
Using the Audio Menu ............................................................................................................... 26
Options (Audio Menu) ................................................................................................................. 27
Using the Channel Setup Menu .................................................................................................. 28
Using the Parental Control Menu .............................................................................................. 30
Parental Control ...................................................................................................................... 31
United States: Selecting Custom Rating Options ............................................................... 33
Canada: Selecting Custom Rating Options ......................................................................... 35
Using the Timer Menu ................................................................................................................ 36
Using the Setup Menu ................................................................................................................. 37
Other Information
Troubleshooting ............................................................................................................................ 39
Specifications ................................................................................................................................. 43
Index ......................................................................................................................................................45
Introduction
Congratulations on your purchase of the Sony FD Trinitron WEGA ®.
Introducing the FD Trinitron WEGA®Features
Some of the features you will enjoy include:
FDTrinitron Flat CRT-- Delivers a picture with uncompromising accuracy and
outstanding image detail via a technologically advanced tube.
Dynamic Bass Response System -- Enhances low-frequency sounds with a powerful
subwoofer. New and exclusive from Sony.
Y, Ps0PRInputs -- Provides component video inputs for superior picture quality
(480i only).
WOW-- Provides a dramatic presence with a full, deep bass sound. When WOW is
enabled, BBE is directly activated to further enhance the audio performance.
BBE-- Gives sound more impact by using audio technology to compensate for phase
effects in speakers.
Surround -- Simulates theater quality sound for stereo programs.
Parental Control (V-Chip) -- Helps parents monitor what their children watch on TV by
establishing rating limits.
Favorite Channels -- Provides instant access to your favorite channels with the touch of a
button.
Info Banner -- Displays the name and the remaining time of the current program, if
available.
Universal Remote Control -- Operates your connected cable box, VCR, digital satellite
receiver, or DVD player.
Energy Star®-- Meets the Energy Star guidelines for energy efficiency.
Front Panel Controls -- Allows access to the on-screen menus without the use of a remote
control.
Front AIV Inputs -- Lets you quickly connect video games, camcorders, or stereo/mono
equipment.
Operating instructions
About this Manual
This manual provides instructions to help you enjoy your new TV. It shows you how to
connect to an antenna or cable, cable box, VCR, DVD, satellite receiver, stereo system, or
camcorden Once your TV is connected, follow the instructions and use the remote control to
access the on-screen menus.
Batteries for the Remote Control
Insert two AA (R6) batteries (supplied) into the remote control using the following illustration
as a guide.
Front Panel Menu Controls
The front Audio/Video panel controls allow you to access the menu without the remote
control.
Ca Press M{)_to display the on-screen menu.
Ca Use the _) and _) buttons on the front Audio/Video panel instead of your remote
control.
Ca
Use the (_) button on the front Audio/Video panel to navigate through the menus, then
select an item. The front panel controls also allow you to change your channels (CH+/-),
adjust the volume (VOL +/-), and change video inputs.
2
Using the Remote Control
Remote Control Description
Button Description
..... _ to restore the sound.
"° [] SYSTEM OFF Powers off all Sony equipment at once (may not
[_ "--[_ _york with older equipment).
| [__-i_.__{_[ _ TVNCR Press when you are finished using a VCR and you
want to switch to the TV Antenna input. Your VCR
[] power will remain on.
-qli_ PicTdREM66E _yci_ ihro_ghthe_v_ii_bie_ideoMode,4tiings
SLEEP
Turns the TV off auton_atically in approxinlately 15,
[]. "-J_ Sleep30"45,Off60Orappears.90minutes. Cancel by pressing until
"_" "_ [] JUMP Press to iun_p back and forih beiween two channeis
The TV alternates between current channel and the
last channel that was selected.
i [] __,_A I [_ @ Press for a direct selection of Effect settings
(Simulated, WOW, SRS, Off) (see page 26).
___[j_ [] RESET Press to return to factory setti_gs while in an on-
___ screen menu.
---N[] VOL (volume) Press when you want to adjust the volume.
II ___ CODE SET Use to program your remote control to operate
connected video equipment (see page 5).
t I _?_!I _ POWER onPresswhen you want to turn connectedequipmentoroff.
I FUNCTION Press when you want to control connected
.................................. equ!Pmen ! w!fll your remote con!rol. ............................
[] VCR/DVD Operates VCR or DVD. Use when you want to
(operating) operate connected VCR or DVD with your remote
.................. _o!_!r?l,.......................................................................
; tL J!o_,o o
[] DISPLAY Press once to show current time (if set) and channel
number. Press again t_ turn DISPLAY off. ....
I [] MTS/SAP Cycles through the Multi-Channel TV Sound (MTS)
options: Stereo, Mono, and Auto SAP (Second
Audio Program).
[] (_)-(_ and Change the channels directly. Press (_)-(_)
ENTER buttons !o select a channel, then press ENTER.
I [] GUIDE Brings up the custom guide of your satellite
receiver.
Operating instructions
l
Button Description
[] _ Moves the cursor in tile on-screen menus. Press the
arrow buttons to move the cursor. Press the center
button to select or access an option.
[] MENU Displays the on-screen menu. Press again to exit the
menu at any time.
[] CH (channel) Press when you want to change channels.
4
Using the Remote Control
Programming the Remote Control
In order to use your remote control with other equipment, you need to program your remote
control. Use the following procedure to program the remote control.
1 Check the list of "Manufacturer's Codes" on page 6 and find the three-digit code number
for the manufacturer of your component. If more than one code number is listed, use the
number listed first.
_r
Press CZg.
3 Press _ or "(_ button to indicate the type of component you want to program with
the remote control.
4
6
Use the (_)-(_) buttons to enter the three-digit manufacturer's code number.
_r_R
Press O"
To check if the code number works, aim the TV's remote control at the component and
press on the green POWER button (VCR/DVD, SAT/CABLE, TV) that corresponds with
that component. If it responds, you are done. If not try using another code listed for that
manufacturer.
Operating instructions
I Manufacturer's Codes Manufacturer Code DVD Players
VCR$ Olympic 309, 308 Manufacturer Code
Optimus 327 751
................................................... Sony
Manufacturer Code Panasonic 308, 309, 306, H{Mchi ................................758 .....................................................
Sony .................................................30i; 302, 305 ........................... 307 JgC ..................... 756 .............
Admirai 327 ......... ......Pentax 305, 304 Magnavox ................................757 ................................................................
(M. Ward) Philco 308, 309 Mit;u6isi4i _61.....
Aiwa 338, 344 Philips 308, 309, 310 Onkyo 762
Audio 314, 337 Pioneer 308
0 ritr°n 759
Dynamic ........... Quasar 308, 309, 306 Panasonic 753
Broksonic 319, 317 RCA/ 304, 305, 308,
Canon 309, 308 PROSCAN 309, 311, 312, Philips 757
Citizen .........................33"_ ................................. 313, 310, 329 Pioneer 752
Craig .............................302; 532 ................... Reaiistic 509_ 550_528_ RCA 755
Criterion ........................315 ..................................... 335, 324, 338 Samsung 758
....................................................................... Sansui 314 .........
Curtis Mathes 304, 338, 309 .................................................... Toshiba 754
Daewoo ............................................34i, 312, 309 .......................Samsung 322, 313:321 Zenith 760
............................................ Sanyo 330, 335
.......DBX 314, 336, 337 Scoff ...........
312, 313, 321, Cable Boxes
Dimensia 304 335, 323, 324,
Emerson 319_ 320, 316_ 325, 326 Manufacturer Code
Eunai 338 Signature 2000 338, 327 225, 226
General ...... 3"_9,304, 309 (M. Ward) Jerrold/G.L/ 201,202, 203,
Electric SV2000 338 Motorola 204, 205, 206,
Go Video 3"_21336, 340 .......... Sylvania 308; 309; 338, 207, 208, 218
Goktstar .......................33"_....................................... 310 Oak 227, 228, 229
..... Panasonic 219, 220, 221
i-Iitachi .......................3061504) 305)...... Symphonic 338
338 Tashiro 352 Pioneer 214, 215
.............................Tatung 314, 336, 337 Scientific 209, 210, 211
jC l'enney 369; 305, 304, .... Teac 3i4, 336; 338; A!!an!a ........................
330, 314, 336, 337 Tocom 216, 217
........... 337 Technics....... 309, 308 Zen{th ......................................................2i2, 2i5 .................................................
JVC 314, 336, 337, ............. ....
345, 346, 347 Toshiba 312, 311
Kenwood 3i4, 336, 352_ Wards................................327_328;55g;..............Satellite Receivers
337 331, 332 Manufacturer Code
LXI (Sears) 332, 305; 33(I, Yamaha 314; 33(I; 336; Soi_y ........... 80i
335, 338 337 E)IRECT T_] 809
Magnavox 308, 509, 310 Zenith 331 E)ish _qetwork 810
Marantz 314, 336, 337 Echostar 810
Marta 332 Laserdisc Players General 802
Memorex N)9, 335 Manufacturer Code Electric
Minolta 305, 304 Sony 701 Hitachi 805
Mitsub{shi/ 3;)3_324, 325, Panasonic 704, 710 Hughes 804
MGA 326 Pioneer 702 Mitsubishi 809
Muititech 3251 338, 32i Panasonic..... 803
RCA/ 8O2, 808
I pROSCANToshiba 806, 807
6
Using the Remote Control
Using your TV Remote Control with Other Equipment
Operating a VCR
Press To
Power on flxe VCR (VCR/DVD green button)
1222
(_-(_ Select a channel
(_)Q Change channels
I1_ Play video tape
• Stop
41_ or _ Search forward or backward
|1 pause .....................
• and I1_ Record
Switch between VCR and TV inputs
Operating a DVD Player
Press To
_a_a_vD Power on the DVD (VCR/DVD green button)
CZ)
_)-(_ Select chapters
_) _) Search chapters forward or backward
Play DVD
• Stop
II Pause
_u Display the DVD menu
g_ the arrow buttons to move the cursor in the menu, and lhe center button to
select an option
Operating a Laser Disc Player
Press To
Power on file laser disc (VCR/DVD green button)
(_ _) Search chapters forward or backward
Play disc
• Stop
II Pause
Operating instructions
I Operating a Satellite Receiver
Press To
sar__E Power on the satellite receiver (SAT/CABLE green button)
(_-(_) Select a channel
_ Challg e channels
,lUMp
(_ Back to previous channel
D_
(ZZ) Display channel number
(_ Display SAT GUIDE
Qu_
M_U Display SAT Menu
U_ the arrow buttons to move the cursor in the menu, and the center button to
select an option
Operating a Cable Box .....................
Press To
6AT/_Bt.E
C:D Power on the cable box (SAT/CABLE green button)
(_-(_) Select a channel
_ Chang e challnels
,lUMp
(_ Change back to previous channel
8
Connecting Your TV
Read this section before setting up your TV for the first time. This section explains how to
I make the basic connections and how to comlect optional equipment.
TV Rear Panel
[]
[]
[]
.[]
I
Jack Description
g Vi6E6 Thisinpu_co_ec_s _oi_eg_i6E6 6UTiackonyour_R or
other video equipment that has S VIDEO. S VIDEO provides
better picture quality than the VHF/UHF jacks or the video
input jack. S VIDEO does not provide sound, so you still must
connect the audio cables.
AUDIO L(MONO), R/ This input connects to the AUDIO/VIDEO output jacks on your
VIDEO VCR or other video equipment. A third video input jack
(VIDEO 2) is located on the front panel of the TV. These
AUDIO/VIDEO input jacks provide better picture quality than
the VHF/UHF jack.
[_ Y_ PB, PWL(MONO), R l_'ds input connects to the component video Y,PB, PR,and
AUDIO L(MONO), R jacks on your DVD player or digital set-
top box (480i only).
AUDIO OUT This jack comlects to the Audio input jacks on your audio
(VAR/FIX) equipment. You can listen to your TV's audio through your
L(MONO), R stereo system.
[_ Dynamic Bass The Dynamic Bass Response System (subwoofer) accentuates
Response System the low frequencies for better overall sound.
9
Operating instructions
BasicConnections
TV with Cable, Indoor, or Outdoor Antenna
Depending on the cable system available in your home, choose one of the cormections below:
A
VHF only 75-ohm (Rear of IV)
or coaxial cable VHF/UHF
VIIF/UHF _ ,_
or
Cable
Use this to copalect the TV to a cable system or an antenna with a 75-ohm cable
(usually built in to newer homes).
B VHF only 300-ohm lead (Rear of TV)
or twin cable VHF/UHF
UHFonlyor _i_
VHFIUHF Antenna connector "_
Converter EAC-25
(not supplied)
Use this to connect the TV to a dipole antenna, also known as a "rabbit ears antenna"
(usually found in older homes).
C VHF
and
UHF
75-ohm
coaxial cable
___,_
(Rear of TV)
,_ r_C-66 UN mixer
,_ (not supplied)
300-ohm lead
twin cable
This allows you to copalect your TV to both a cable system and a dipole antenna, in order to
view both cable and local chapalels.
10
Connecting Your TV
Dynamic BassSystem Connection (Subwoofer)
Introduce the support bolt of the Dynamic Bass Response System into the guide located
on top of the TV.
Dynamic BassResponse System
Bolt
2
Connect the Dynamic Bass Response System cables (supplied) to the indicated inputs of
the TV rear panel. Connect the gray cable to the SUBWOOFER @÷ (gray input). Connect
the black cable to the SUBWOOFER _- (black input). See illustration below.
iii
_ Subwoofer + (gray)
Subwoofer - (black)
3 Once installation is complete, plug the TV's AC powercord into the wall socket.
11
Loading...