Sony D-WAVE Zuma CM Z200 Operating Instructions Manual
3-864-804-11 (1)
Digital Portable
Cellular Telephone
Operating Instructions
1_CM_Z200 6/8/98, 9:26 AM1
CM-Z200
Welcome to the CM-Z200
Menu map
Standby displaySaved #s display
+
SAVED #S
:Calls List
:Phone Book
:Find Name
or
It's a Sony!
–
12:34P 12/25
:Saved #s
:Features
Enter
digits
List
10 most
recent
calls
•Options
-Send
-Prefix
-Duration
-Time/Date
-View Number
-Number Tone
-Save
Find
name in
Phone
Book
List up to
99 saved
numbers in
Phone Book
•Options
-Send
-Prefix
-Edit
-Restriction
-View Number
-Number Tone
-Erase
+
–
FEATURES
•Message
-Voice*
-New Text*
-Old Text*
-Erase Old*
•Sounds
-Ringer Volume
-Mute/Unmute
-Keybeep Volume
-Earpiece Volume
-Ringer Type
-Key Sound
-Beep Length
•Timers
-All Calls*
-Recent Calls*
-Roam Calls*
-Minute Alert
-Auto-Off
•Directory
-My Number
-Save
-Erase
-Edit
-Find Name
-Phone Book
-Calls List
•Extras
-Key Guard
-Touch Dial
-Auto-Retry
-Auto-Answer
-Scratch Pad
•Security
-Lock Phone
-New Code
-Restrict #
-Restrict All
-Master Reset
-Erase Book
-Erase Calls
-Emergency #
•Options
-Send
-Save
-Hard Pause
-Time Pause
-Enter Link
-Enter Hyphen
-Find Number
Short
Features
Menu
•Message
-Voice
-New Text
-Old Text
-Erase Old
•Ringer Volume
•My Number
•Saved #s
•Lock Phone
•Long Menu
•Display
-Banner*
-Backlight
-Auto-hyphen
-Sort Book
-Language*
-Menu Length
-Msg. Format*
•Network
-Roam Alert*
-Drop Alert*
-Priv. Alert*
-Auto-N.A.M.*
-Set-N.A.M.*
-Set System*
-Force Call*
*) These features may
be available with
some networks and
service providers.
1.2
1_CM_Z200 6/8/98, 9:26 AM2
Easy dialing
You can easily make a call using a number from the Phone Book or the Calls List.
First, turn the Jog Dial either up or down one time to search phone numbers. Then
scroll down to view saved numbers in the Phone Bookor scroll up to view your most
recently called numbers in the Calls List. Simply open the arm microphone to call
the number you choose.
No.1
SONY
1234567890123456
MENU
MENU
DEF
DEF
3
3
CLR
CLR
ABC
ABC
2
2
MNO
MNO
6
6
1
1
JKL
JKL
5
5
XYZ
XYZ
W
W
9
9
GHI
GHI
4
4
TUV
TUV
8
8
PQRS
PQRS
7
7
0
0
MENU
MENU
DEF
DEF
3
3
CLR
CLR
ABC
ABC
2
2
MNO
MNO
6
6
1
1
JKL
JKL
5
5
XYZ
XYZ
W
W
9
9
GHI
GHI
4
4
TUV
TUV
8
8
PQRS
PQRS
7
7
0
0
MENU
DEF
3
CLR
ABC
2
MNO
6
1
JKL
5
XYZ
W
9
GHI
4
TUV
8
PQRS
7
0
Easy menu access
You can easily access your phone’s settings through the Features menu. Press the
Jog Dial again to view the options of each menu item.
MENU
MENU
1_CM_Z200 6/8/98, 9:26 AM3
Clock Alarm
Sleep
MENU
DEF
3
CLR
ABC
2
MNO
6
1
JKL
5
WXYZ
9
GHI
4
TUV
8
PQRS
7
0
MENU
DEF
3
CLR
ABC
2
MNO
6
1
JKL
5
WXYZ
9
GHI
4
TUV
8
PQRS
7
0
MENU
DEF
3
CLR
ABC
2
MNO
6
1
JKL
5
WXYZ
9
GHI
4
TUV
8
PQRS
7
0
MENU
DEF
3
CLR
ABC
2
MNO
6
1
JKL
5
WXYZ
9
GHI
4
TUV
8
PQRS
7
0
Wake Up
Display
Clock Alarm
Sleep
Wake Up
Display
1.3
Before operating the CM-Z200 portable cellular/PCS telephone, please read this
manual thoroughly and retain it for future reference. If your usage includes invehicle operation, it is recommended that you refer to the Installation/Connections/
Operation manual for the optional accessory kits.
DISPOSAL OF LITHIUM ION BATTERY
LITHIUM ION BATTERY. DISPOSE OF PROPERLY.
You can return your unwanted lithium ion batteries to your nearest Sony Service
Center or Factory Service Center.
Note: In some areas the disposal of lithium ion batteries in household or
business trash may be prohibited.
For the Sony Service Center nearest you call 1-800-222-SONY (United States only).
For the Sony Factory Service Center nearest you call 416-499-SONY (Canada only).
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified
personnel only.
FCC CAUTION STATEMENT
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
Owner’s record
The model number, regulatory number, and serial number are located on a
nameplate inside the battery compartment. Record the serial number in the space
provided below. Refer to these numbers whenever you call your dealer regarding
this product.
Model No.: CM-Z200 Serial No.: ________________________
1.4
1_CM_Z200 6/8/98, 9:26 AM4
Table of contents
Rules and regulations ....................................................................................................... 1.6
Safety precautions .............................................................................................................1.7
Getting Started
Unpacking your phone ..................................................................................................... 2.1
Looking at your phone ..................................................................................................... 2.2
Charging the battery pack ................................................................................................ 2.4
Basic Calling Operations
Turning the phone on........................................................................................................ 3.1
Making calls ....................................................................................................................... 3.2
Receiving calls.................................................................................................................... 3.3
Advanced Calling Operations
Storing phone numbers in the Phone Book ....................................................................... 4.1
Calling from the Phone Book ........................................................................................... 4.6
Searching the Phone Book ................................................................................................ 4.8
Calling from the Calls List..............................................................................................4.10
Sending DTMF signals from the Phone Book .........................................................................
Features Menu
About the Features menu .................................................................................................5.1
Messages .............................................................................................................................5.2
Sounds ................................................................................................................................. 5.7
Timers ................................................................................................................................ 5.10
Directory ...........................................................................................................................5.12
Extras ................................................................................................................................. 5.16
Security ............................................................................................................................. 5.18
Display ..............................................................................................................................5.22
Network ............................................................................................................................5.25
Additional Information
Troubleshooting .................................................................................................................6.1
Accessories ......................................................................................................................... 6.2
Specifications ......................................................................................................................6.3
List of menu items .............................................................................................................6.4
Glossary .............................................................................................................................. 6.6
Index .................................................................................................................................... 6.8
4.11
Basic Calling OperationsFeatures Menu Getting StartedAdditional Information
Advanced Calling Operations
1_CM_Z200 6/8/98, 9:26 AM5
1.5
Rules and regulations
The U.S. Federal Communications
Commission and the Industry Canada
regulate cellular/PCS telephone service
in their respective countries. It is
important for you, the cellular/PCS
telephone user, to observe the
applicable regulations when operating
your cellular/PCS telephone in either
country. In addition to these U.S. and
Canadian federal regulations, you may
be bound also by certain state,
provincial, territorial, and local rules
and regulations, as well as by your
cellular/PCS carrier’s tariff (the rates,
terms, and conditions of its service). If
you wish to use your cellular/PCS
telephone in both the U.S. and Canada,
please consult with your System
Operator.
Furthermore, you should remember
that your cellular/PCS telephone is a
radiotelephone, — i.e., it combines both
wireline technology, as used in your
home or office telephone system, and
radio technology — and that the scope
of regulations and precautions is
therefore broader than the scope of
regulations and precautions relating to
wireline-only telephone usage.
Some of the major points of
consideration are set out below. Please
note, however, that these “Rules and
Regulations" and "Safety Precautions”
sections do not constitute legal advice,
and are intended merely for general
information purposes. If you have
specific questions, please contact your
cellular/PCS carrier (System Operator).
License — If your home system is in the
U.S., you do not require a separate
license to operate your cellular/PCS
telephone; obtaining a cellular/PCS
telephone access number is sufficient to
register you as a user. If your home
system is in Canada, a separate license
is required; your carrier will assist you
in the licensing process. If you wish to
use your cellular/PCS telephone on
both sides of the border, please contact
your cellular/PCS carrier (System
Operator).
Equipment modifications — The U.S.
Federal Communications Commission
has type-approved the model of
cellular/PCS telephone which you have
purchased, and has allocated a specific
frequency range for cellular/PCS
service. No changes or adjustments are
to be made to your cellular/PCS
telephone.
The radio equipment shall be made
available for inspection upon request by
representatives of the FCC or licensees.
Denial of service — A cellular/PCS
carrier may deny service temporarily or
terminate service for violation of any
government regulations or violation of
its tariff.
Privacy — As a telephone user, you
have come to assume a certain standard
of privacy when you place or receive a
telephone call via the traditional
wireline systems. However, because
cellular/PCS telephones utilize radio
transmissions to effect calls, the same
standard cannot always be assured.
While it is unlawful for any
unauthorized person to divulge or use
any information obtained from
intercepting or “listening in on”
conversations intended for others, you
should not assume that your
conversation is completely secure.
Commercially available scanning
equipment can permit a third party to
monitor the radio channels used for
cellular/PCS telephone calls.
Interference — No person shall
interfere with, or cause interference to,
any radio communication or signal.
1.6
1_CM_Z200 6/8/98, 9:26 AM6
Safety precautions
IMPORTANT
For safe and efficient operation of
your phone, observe these
guidelines.
Your dual mode (analog/digital
CDMA) hand-held portable cellular/
PCS telephone uses both analog
frequency modulation (FM) technology
and digital Code Division Multiple
Access (CDMA) technology. CDMA is a
newer radio frequency (RF) technology
than the FM technology that has been
used for radio communications for
decades.
Your dual mode portable cellular/PCS
telephone is a radio transmitter and
receiver. When the phone is ON, it
receives and sends out radio frequency
(RF) energy. The phone operates in the
frequency range of 824 MHz to 894
MHz. When you use your phone, the
cellular/PCS system handling your call
controls the mode of operation (analog
or digital CDMA) and the power level
at which your phone transmits. In the
analog mode, the power is continuously
transmitted at a level that can range
from about 6 mW to about 600 mW. In
the digital CDMA mode, the power is
transmitted as a digitally coded
waveform at a rate varying from 100 Hz
to 800 Hz. The average power can range
from about 0.01 µW to about 300 mW.
Exposure to radio frequency
energy
Research on health effects from RF
energy has focused for many years on
FM radio technology. That research and
studies regarding newer radio
technologies, such as CDMA, have
found no credible scientific evidence
that adverse health effects result from
the use of cellular/PCS telephones.
The Institute of Electrical and
Electronics Engineers (IEEE) in 1991,
and The American National Standards
Institute (ANSI) in 1992, updated the
1982 ANSI Standard for safety levels
with respect to human exposure to RF
energy. Over 120 scientists, engineers,
and physicians from universities,
government health agencies, and
industry, reviewed the available
research and developed this updated
Standard. In March 1993, the U.S.
Federal Communications Commission
(FCC) proposed the adoption of this
updated Standard.
The design of your phone complies
with this updated Standard. Of course,
if you want to limit RF exposure even
further than the updated ANSI
Standard, you may choose to control
the duration of your calls and operate
your phone in the most power efficient
manner.
Efficient phone operation
For your phone to operate at the lowest
power level consistent with satisfactory
call quality, please observe the
following guidelines:
Your phone has an extendable antenna;
extend it fully whenever possible for
maximum efficiency.
Hold the phone as you would any other
telephone. While speaking directly into
the mouthpiece, position the antenna
up and over your shoulder.
Do not hold the antenna when the
phone is in use. Holding the antenna
affects call quality and may cause the
phone to operate at a higher power
level than needed.
1_CM_Z200 6/8/98, 9:26 AM7
1.7
Antenna care and replacement
Do not use the phone with a damaged
antenna. If a damaged antenna comes
into contact with the skin, a minor burn
may result. Replace a damaged antenna
immediately. Take your phone to an
authorized service center for repair.
Use only the supplied or approved
antenna. Unauthorized antennas,
modifications, or attachments could
impair call quality, damage the phone,
and violate FCC regulations.
Driving
Check the laws and regulations on the
use of cellular/PCS telephones in the
areas where you drive. Always obey
them. Also, when using your phone
while driving, please:
• pay full attention to driving;
• use hands-free operation, if available;
• pull off the road and park before
making or answering a call, if driving
conditions so require.
Electronic devices
Most modern electronic equipment is
shielded from RF energy. However, RF
energy from cellular/PCS telephones
may affect some electronic equipment.
RF energy may affect improperly
installed or inadequately shielded
electronic operating and entertainment
systems in motor vehicles. Check with
the manufacturer or its representative
to determine if these systems are
adequately shielded from external RF
energy. You should also check with the
manufacturer of any equipment that
has been added to your vehicle.
Medical devices
Consult the manufacturer of any
personal medical devices (such as
pacemakers, hearing aids, etc.) to
determine if they are adequately
shielded from external RF energy. Your
physician may be able to assist you in
obtaining this information.
Turn your phone OFF in health care
facilities when regulations posted in the
areas instruct you to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
Aircraft
Turn your phone OFF before boarding
any aircraft.
• Use it on the ground only with crew
permission.
• Do not use in the air.
To prevent possible interference with
aircraft systems, U.S. Federal Aviation
Administration (FAA) regulations
require you to have permission from a
crew member to use your phone while
the plane is on the ground. To prevent
interference with aircraft
communication systems, FCC
regulations prohibit using your phone
while the plane is in the air.
Children
Do not allow children to play with your
phone. It is not a toy. Children could
hurt themselves or others (by poking
themselves or others in the eye with the
antenna, for example). Children also
could damage the phone or make calls
that increase your telephone bill.
1.8
1_CM_Z200 6/8/98, 9:26 AM8
Blasting areas
To avoid interfering with blasting
operations, turn your unit OFF when in
a “blasting area” or in areas posted:
“Turn off two-way radio.” Construction
crews often use remote control RF
devices to set off explosives.
Potentially explosive
atmospheres
Turn your phone OFF when in any area
with a potentially explosive
atmosphere. It is rare, but your phone
or its accessories could generate sparks.
Sparks in such areas could cause an
explosion or fire resulting in bodily
injury or even death.
Areas with a potentially explosive
atmosphere are often, but not always,
clearly marked. They include fueling
areas such as gas stations; below deck
on boats; fuel or chemical transfer or
storage facilities; areas where the air
contains chemicals or particles, such as
grain, dust, or metal powders; and any
other area where you would normally
be advised to turn off your vehicle’s
engine.
Do not transport or store flammable
gas, liquid, or explosives in the
compartment of your vehicle which
contains your phone or accessories.
In the United States, vehicles using
liquefied petroleum gas (such as
propane or butane) must comply with
the National Fire Protection Standard
(NFPA-58). For a copy of this standard,
contact the National Fire Protection
Association, One Batterymarch Park,
Quincy, MA 02269, Attn: Publication
Sales Division.
In Canada, vehicles using liquefied
petroleum gas (such as propane or
butane) must comply with the
Canadian Gas Association (CAN/CGSB149.2). For a copy of this standard,
contact the Canadian Standards
Association, 178 Rexdale Blvd.,
Etobicoke, ON M9W 1R3, Attn.:
Standard Sales Department.
1_CM_Z200 6/8/98, 9:26 AM9
1.9
1.10
(this page intentionally left blank)
1_CM_Z200 6/8/98, 9:26 AM10
Unpacking your phone
Carefully unpack your phone and check the contents using this list.
If there is something missing, please contact your nearest Sony dealer.
CM-Z200 Telephone (1) QN-029BPL Li-Ion Battery Pack (1)
Hand Strap (1) QN-001AC AC Adapter (1)
Getting Started
Attaching the hand strap
1 2
2_CM_Z200 6/8/98, 9:26 AM1
Note: Different AC adapters may
be provided outside North
America.
2.1
NO
8
TUV
9
PWR
CLR
END
WXY
0
+
Looking at your phone
For further information, refer to the page numbers indicated in parentheses ( ).
1
2
3
1
ABC
2
DEF
3
SEND
GHI
4
Telephone
1 Call alert indicator (XX)
Lights when there is an incoming call.
2 Earpiece
3 Display (XX)
4 Number buttons and
buttons (XX, XX, XX)
Use the number buttons to enter letters
and numbers. Press and hold a number
button for touch dialing. Use the /
you are entering letters.
5 Arm microphone
Open to make/receive a call.
Close to end a call.
SEND
6
Press to make outgoing calls and to
receive incoming calls when the arm
microphone is open.
CLR
7
Press to clear the last or all entered
digits on the display, or to exit the
current mode of operation.
4
JKL
5
MNO
6
CLR
PQRS
7
TUV
8
9
WXYZ
END
0
+
PWR
/
buttons to move the cursor when
button (XX to XX)
(clear) button (XX, XX)
!º
!¡
5
6
!™
7
8
!£
9
!§
END
8
button (XX)
Press to end calls. Also cancels
operations and returns the phone to
standby mode.
PWR
9
(power) button (XX)
Press to turn the phone on or off.
0 Ringer speaker
Allows ringer sounds to be heard.
!¡ Hand strap attachment (XX)
!™ Battery pack (XX)
!£ Battery pack release tab (XX)
Slide up to remove the battery pack.
!¢ Antenna (XX)
!∞ Jog Dial™ navigator (XX)
Push and turn for menu navigation and
for changing settings on menus. In this
manual, the
should push the Jog Dial navigator in
towards the center of the phone.
!§ Connector (XX)
Use to connect the phone to either the
AC adapter or to one of the other
accessories available for your phone.
!¢
!∞
icon indicates that you
2.2
2_CM_Z200 6/8/98, 9:27 AM2
Display
The top row of the display contains icons that inform you of the current status of
your phone. The bottom four rows of the display are for text such as phone numbers,
names, and operational prompts. Each row displays a maximum of 12 characters.
1 2 3 4 5 6 7
888
1 Short character display
Shows settings such as the number of
the currently displayed Menu, as well
as Phone Book and Calls List memory
locations.
(in-use) / (out-of-service) icon
2
(XX, XX, XX)
The in-use icon appears during a call.
A slash through the in-use icon
appears when no signal is received.
You cannot make or receive calls when
the out-of-service icon is visible.
(digital) icon
3
Appears when your phone is receiving
a digital signal.
(signal strength) icon (XX)
4
Tells you the approximate strength of
the signal being received.
8
(roam) icon (XX)
5
Appears when you are roaming
outside your home service area.
6
(message) icon (XX)
Appears when you have new text or
voice mail messages pending. The icon
flashes if the new message is urgent.
(battery) icon (XX, XX)
7
Shows the approximate amount of
charge power remaining in the battery
pack. Recharge the battery pack before
it is fully discharged.
8 Character display
Prompts various actions, and then
displays the results. It also shows
phone numbers and names.
Getting Started
2_CM_Z200 6/8/98, 9:27 AM3
2.3
Charging the battery pack
Charge the battery before using the phone. A new battery is not fully charged. To
charge the battery, attach the battery pack to the phone, then connect the supplied
AC adapter.
Attaching the battery pack
1 Hook the battery pack onto the top of the
phone 1, and ease the battery pack down 2.
2 Snap the battery pack in place.
To remove the battery pack
1 Push the battery pack release tab upwards.
2 Lift up the bottom of the battery pack 1,
and pull it out 2.
2.4
2_CM_Z200 6/8/98, 9:27 AM4
Charging the battery
Connect the AC adapter to the phone and the other end to a standard AC outlet as
illustrated below. The charging time is approximately 3.5 hours. You can charge the
battery pack with the phone turned on, but charging will take longer.
to an AC
outlet
display
to the connector on the phone (the
thumb indent should face upwards)
When the power is turned on
As the battery pack charges, the battery icon ( ) indicates that the phone is charging.
When the power is turned off
The message Battery is Charging is displayed, and pulses. When the battery
pack is fully charged, the message Charging is Complete is displayed, and
stops pulsing.
Notes
• If you make or receive a call when the battery pack is not charged sufficiently, the call
will be cut off. In that case, you will hear an alarm, indicating that the battery is low.
• You can turn on the phone without the battery pack, but you cannot make or receive a
call, even if you connect the AC adapter to an AC outlet.
Getting Started
Notes on charging
• When you charge the battery pack, avoid:
– charging for long periods of time, since this reduces battery life.
– charging in temperatures below 32°F (0°C) or over 104°F (40°C).
– charging the battery in direct sunlight or in places with high humidity (such as
a bathroom).
• Do not use any battery pack other than the one specified in these instructions.
• It is normal for the battery pack to become warm during charging or after use.
• The supplied AC adapter is not intended to be serviced. In the event of a
malfunction, it should be replaced.
Notes on the battery pack
• Do not dispose of the battery pack in a fire or short-circuit it. Doing so may cause
the battery pack to leak or get hot, which could cause personal injury.
• Do not try to disassemble the battery pack.
2_CM_Z200 6/8/98, 9:27 AM5
2.5
Checking the battery
CDMA mode Analog mode
In standby mode 40 hours 11 hours
In use continuously 2.3 hours 1 hours
Battery condition
The battery icon indicates the battery level as follows (when the power is on):
Full
Note that the battery icon displays the approximate charge level and that the
consumption may vary depending on conditions of use, such as ambient
temperature, network coverage, and usage patterns.
n n n
n n
Empty
When the battery is empty
The battery icon flashes and a warning message is displayed. A beep sounds,
indicating that the battery is low. Shortly thereafter, the phone turns off. Recharge
the battery as soon as possible.
2.6
2_CM_Z200 6/8/98, 9:27 AM6
Turning the phone on
To use your phone, the power must be turned on.
It is preferable to extend the antenna, since this
maximizes signal strength and minimizes interference.
Pull up
Call
Extending the antenna
Hold the end of the antenna and
pull up until fully extended.
To retract the antenna
Push the antenna down until it is fully retracted.
alert
PWR
Turning the power on
Hold down
sounds, and the phone starts searching for a signal. When the phone has found a
service signal, the standby display appears and the call alert indicator goes off. Now
the phone is ready to use.
PWR
for about one second. The call alert indicator lights up, a beep
To check the digital service
The digital service icon ( ) appears when your phone is operating in digital or
CDMA mode. If a digital signal is not available, your phone will look for a cellular
or analog signal. Some networks may allow you to force your phone to operate in
analog mode (see “Forcing the phone into analog mode” on page XX).
To check the signal strength
The signal strength icon indicates various levels of signal strength. It is best to make
calls when the signal is strong, although calls can be made when the signal strength
is weak.
Strong Weak
Basic Calling Operations
If you are out of the service area
The out-of-service icon ( ) appears, and the phone searches for a service signal. If a
signal cannot be found, the phone enters power save mode. It will “wake up”
automatically at intervals (based on carrier network settings) to search for a service
signal.
Turning the power off
Hold down
3_CM_Z200 6/8/98, 9:27 AM1
PWR
for about one second.
3.1
Making calls
You can call any number up to 32 digits from within a
service area. The out-of-service icon (
) indicates that
you are outside the service area.
1 Use the number buttons to enter the number.
If you enter the wrong digit, press
digits, press
END
or hold down
CLR
to back up. To clear all entered
CLR
to return to the standby display.
Arm mic
CLR
SEND
OPER
0
9
/
END
WX
YZ
2 If the arm microphone is closed, open it to dial. If the arm
microphone is open, press
The phone dials the number you have entered. The icon appears.
When the call is connected, the call timer appears and displays the elapsed
time.
3 Press
END
or close the arm microphone to end the call when you are
finished.
The icon disappears and the final elapsed call time flashes for 10 seconds.
The standby display automatically reappears.
Tips
• When dialing, you can insert a pause to attach a DTMF (Dual Tone Multiple Frequency)
number to the number you are calling (see page XX).
• If Auto-Hyphen is turned on, the phone number is hyphenated automatically as you
enter the digits (see page XX).
• If Minute Alert is turned on, a beep sounds at intervals (based on the setting you select)
throughout the call (see page XX).
SEND
to dial.
To adjust the earpiece volume during a call
To increase the volume, turn + up.
Turn
down to decrease the volume.
–
Tip
In addition, you can adjust the volume using the Volume menu (see page XX).
To mute/unmute the microphone during a call
Push and hold .
Tip
In addition, you can mute the microphone using the Volume menu (see page XX).
To redial the last number
On the standby display, press
you dialed last is redialed automatically.
3.2
3_CM_Z200 6/8/98, 9:27 AM2
SEND
when the arm microphone is open. The number
Receiving calls
CLR
You can receive calls as long as the out-of-service icon
(
) is not displayed. The icon indicates that you
are outside the service area.
Arm mic
CLR
SEND
END
When you receive a call, the ringer sounds or the phone vibrates. Incoming Call
flashes on the display, and the call alert indicator blinks.
1 If the arm microphone is closed, open it to answer the call. If the
arm microphone is open, press any button except
the call.
When the call is connected, the call timer appears and displays the elapsed
time.
2 Press
END
or close the arm microphone to end the call when you are
finished.
The icon disappears, and the final elapsed call time flashes for 10 seconds.
The standby display automatically reappears.
Tips
• While the phone is ringing, turn
• Using the Jog Dial navigator, you can adjust the earpiece volume or mute the
microphone during a call (see pages XX and XX).
• If you turn off the ringer volume (see page XX), you will not hear the ringer sound. The
message -Ringer Off- is displayed on the standby display.
down to lower the ringer volume.
–
If the caller supports caller ID
The caller’s phone number appears on the display when you receive a call if both
the caller and the carrier support this feature.
If the caller supports caller ID and the number matches a Phone Book entry, the
name that you stored with the number (if any) is displayed also.
PWR
to answer
Basic Calling Operations
If you miss a call
If you miss an incoming call, the message You have missed XX calls. appears on the
display. To return to the standby display, either press
supported caller ID, the caller’s number is stored in the Calls List (see page XX).
3_CM_Z200 6/8/98, 9:27 AM3
END
,
, or . If the caller
3.3
Storing phone numbers in the Phone Book
Your phone features a built-in Phone Book memory,
in which you can store up to 99 (01–99) phone
numbers with names. You can dial stored numbers
quickly by recalling them from the Phone Book (see
page XX).
Each phone number can contain up to 32 digits, and each name up to 12 characters.
This section shows how to store, edit, and erase Phone Book numbers quickly.
1
On the standby display, use the number buttons to enter the number.
The number appears on the display. In addition, you can store hyphens,
pauses, and links with your Phone Book entries (see page XX).
2 Push .
The Options menu appears.
3 Turn to select Save, then push .
The message Enter a Name appears on the display, prompting you for a
name to accompany the number.
4 Use the number buttons to enter the name.
If you press the same button in quick succession, you will scroll through the
characters available on that button. (See the “Alphanumeric table” on page
29.) For the next entry, wait until the cursor moves one step to the right or
use
/ or to move the cursor and insert spaces between characters.
If you enter the wrong character, press
by the cursor.
To enter “SONY”
PQ
7
RS
Press
Press
right for the next entry.
Press
Press
5
When you are finished, push to store the phone number and name.
four times to enter an “S.”
MNO
6
three times to enter an “O.” Wait until the cursor moves one step to the
MNO
6
twice to enter an “N.”
WX
9
YZ
three times to enter a “Y.”
The message Save in location XX? appears on the display, indicating the
first available memory location.
6
Push to store the new number in the first available memory location.
If you want to store it in another location, turn to select the desired
location or enter the location number, then push
appears, followed by the status of the Phone Book.
Tip
In addition, you can use the Directory menu to store Phone Book numbers (see page XX).
CLR
to clear the character highlighted
CLR
WX
OPER
9
YZ
0
/
. A confirmation message
Advanced Calling Operations
4_CM_Z200 6/8/98, 9:27 AM1
4.1
Alphanumeric table (English)
Each time you press a number button, the letters/numbers appear as follows:
Button Sequence
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQ
7
RS
TUV
8
WX
9
YZ
OPER
0
Tip
When you change your phone’s language setting (see page XX), a different set of
characters becomes available. See the Spanish, Portuguese or French operating
instructions to view the alphanumeric table of each language.
–“.‘,&():1
ABCabc2
DEFdef3
GHIghi4
JKLjkl5
MNOmno6
PQRSpqrs7
TUVtuv8
WXYZwxyz9
0
To enter a hyphen, pause, or link
In addition to digits, you can insert hyphens, time pauses, hard pauses, and links
into the phone number of a Phone Book entry. (See page 36 for information on
releasing a pause or link during a call.)
Hyphens: Turn off the autohyphenation feature (see page XX) when you want to
enter a hyphen manually; for example, when you store a number that doesn’t follow
the US/Canada standard. Autohyphenation will be turned off for that number.
Pauses: A time pause (
connected. A hard pause (
connected. For example, you may want to enter a phone number in your Phone
Book as follows: 1-800-555-1212
number allows you to dial the extension 123 after you have reached 1-800-555-1212.
Links: You can join two or more Phone Book entries (for example, a doctor’s phone
number and your medical record number). Once you have specified the first entry,
you insert a link. Then you specify the second number by entering its memory
location number.
T) sends additional digits about two seconds after a call is
H) allows you to send additional digits after a call is
H123. The hard pause character in the phone
1 While entering digits, push .
The Options menu appears on the display.
2 Turn to select which information to enter, then push .
After inserting a hyphen, pause, or link, the display returns to number entry
mode.
4.2
4_CM_Z200 6/8/98, 9:27 AM2
Loading...