Sony DVP-S535D Service Manual

DVP-S535D

RMT-D116O

SERVICE MANUAL

E Model

Australian Model

The Service Manual for this set contains only the points which differ is bound together with the following Service Manual and therefore please refer to them.

DVP-S535D: Australian →		DVP-S735D: Australian
DVP-S535D: E	→	DVP-S735D: E

See page 3 for different parts.

•Main Unit

DVPS335/S336/S345/S535D/S735D 9-921-754-11

Service Manual

Difference Manual

		SPECIFICATIONS
CD/DVD				Outputs
Laser	Semiconductor laser
Signal format system
				Jack	Output	Load impedance
	NTSC/PAL
				type	level

Audio characteristics

Frequency response

DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1 dB)

DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)

CD: 2 Hz to 20 kHz (±0.5 dB)

Signal-to-noise ratio

More than 110 dB (AUDIO OUT connectors only)

Harmonic distortion

Less than 0.003 %

Dynamic range

More than 100 dB (DVD) More than 97 dB (CD)

Wow and flutter

Less than detected value (±0.001 % W PEAK)

AUDIO OUT	Phono	2 Vrms	Over 10 kilohms
(1, 2) (R, L)	jacks	(at 50 kilohms)
DIGITAL OUT	Optical	–18 dBm	Wave length: 660 nm
(OPTICAL)	output
	connector
DIGITAL OUT	Phono	0.5 Vp-p	75 ohms terminated
(COAXIAL)	jack
VIDEO OUT	Phono	1.0 Vp-p	75 ohms,
(1, 2)	jack		sync negative
S VIDEO OUT	4-pin	Y: 1.0 Vp-p	75 ohms,
(1, 2)	mini DIN	C: 0.3 Vp-p	sync negative
			75 ohms terminated
		(PAL)
		C: 0.286 Vp-p
		(NTSC)
COMPONENT	Phono	Y: 1.0 Vp-p	75 ohms,
VIDEO OUT	jacks		sync negative
(Y, CB/B-Y,		CB/B-Y,
CR/R-Y)
		CR/R-Y:
		0.7 Vp-p	75 ohms

– Continued on next page –

CD/DVD PLAYER

	Outputs					Supplied accessories
						• Audio/video connecting cord (1)
						• Remote commander (remote) (1)
		Jack	Output	Load impedance
						• R6 (size AA) batteries (2)
						• S video cord (1)
	5.1CH	Phono	2 Vrms	Over 10 kilohms
	OUTPUT	jack	(at 50 kilohms)			Design and specifications are subject to change without notice.
	PHONES	Phone	12 mW	32 ohms
		jack

General

Power requirements

220 to 240 V AC, 50/60 Hz

Power consumption

16 W

Dimensions (approx.)

430 × 69 × 260 mm

(w/h/d) incl. projecting parts

Mass (approx.)

2.9 kg

Operating temperature

5 ° C to 35 ° C

Operating humidity

25 % to 80 %

• Difference Table

Page		DVP-S735D: E, Australian					DVP-S535D: E, Australian
		(2-4) Model Type				(2-4) Model Type
6-2			Model Type					Model Type
		DVP-S735D (E)	2	9			DVP-S535D (E)	1	9
		DVP-S735D (Australian)	2	A			DVP-S535D (Australian)	1	A

– 2 –

• DIFFERENT PARTS LIST

8-1. EXPLODED VIEWS

NOTE:

•-XX and -X mean standardized parts, so they may have some difference from the original one.

•Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. KNOB, BALANCE (WHITE) . . . (RED)

↑ ↑

Parts Color

Cabinet's Color

•The mechanical parts with no reference number in the exploded views are not supplied.

•Accessories and packing materials are given in the last of the electrical parts list.

8-1-2. CASE ASSEMBLY

64

60

60

62

63	60

not supplied

55

59

58

54

	not	57
	supplied
51		56

52

Ref. No.	Part No.	Description	Remark	Ref. No.	Part No.	Description	Remark
51	X-3950-734-1	PANEL ASSY, FRONT		58	3-970-608-51	SUMITITE (B3), +BV
52	3-059-349-11	CUSHION, FOOT		59	3-059-389-01	CUSHION (REAR), FOOT
54	3-975-726-71	EMBLEM, DVD		60	3-710-901-11	SCREW, TAPPING
55	3-061-719-31	COVER, TRAY		62	1-418-991-51	COMMANNDER, STANDARD (RMT-D116O)
56	3-059-322-31	STICK, CURSOR		63	3-053-633-01 COVER, BATTERY (for RMT-D116O)
57	1-771-913-11	SWITCH, TACTILE		64	3-062-941-01	CASE

– 3 –