SONY DVP-S300 User Manual [fr]
3-865-371-11 (1)
CD/DVD Player
Operating Instructions
Mode d'emploi
EN
F
DVP-S300
1998 by Sony Corporation
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
CAUTION
The use of optical instruments with this product will
increase eye hazard. As the laser beam used in this
CD/DVD Player is harmful to eyes, do not attempt to
disassemble the cabinet.
Refer servicing to qualified personnel only.
This label is located on the Laser protective housing
inside the enclosure.
CAUTION
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Welcome!
Thank you for purchasing the Sony CD/DVD Player.
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
EN
2
TABLE OF CONTENTS
This Player Can Play the Following Discs................................................................4
Getting Started
Unpacking.............................................................................................................................6
Hooking Up the System......................................................................................................6
Necessary Setup Before Using the Player ........................................................................9
Selecting the Language for On-screen Display ............................................................... 9
Basic Operations
Playing a DVD....................................................................................................................... 10
Playing a CD/VIDEO CD................................................................................................... 14
Playing Discs in Various Modes
Using the On-Screen Display .......................................................................................... 18
Using the Front Panel Display ........................................................................................ 20
Playing Repeatedly (Repeat Play) .................................................................................. 22
Playing in Random Order (Shuffle Play) ...................................................................... 23
Creating Your Own Program (Program Play).............................................................. 24
Resuming Playback from the Point Where You Stopped a Disc (Resume Play)..... 25
Changing the Sounds ....................................................................................................... 26
Displaying the Subtitles ................................................................................................... 26
Changing the Angles ........................................................................................................ 27
Limiting Playback by Children (Parental Control)...................................................... 28
Controlling the TV or the AV receiver with the Supplied Remote ........................... 30
EN
F
Settings and Adjustments
Using the Setup display ................................................................................................... 32
Setting the Language for Display and Sound (LANGUAGE SETUP) ...................... 33
Settings for Display (INITIAL SETUP 1) ....................................................................... 34
Settings for Sound (INITIAL SETUP 2) ......................................................................... 35
Additional Information
Precautions ........................................................................................................................ 36
Notes on Discs ................................................................................................................... 36
Troubleshooting ................................................................................................................ 37
Self-diagnosis function..................................................................................................... 39
Specifications ..................................................................................................................... 40
Glossary.............................................................................................................................. 40
Index to Parts and Controls............................................................................................. 42
Setup Display Item List.................................................................................................... 45
Language Code List.......................................................................................................... 46
Index.......................................................................................................................................... 47
EN
3
Getting Started
About This Manual
The instructions in this manual are for model DVP-S300.
Icon Meaning
Conventions
• Instructions in this manual describe the controls on the
player.
You can also use the controls on the remote if they have
the same or similar names as those on the player.
• The icons on the right are used in this manual:
Z
z
This Player Can Play the Following Discs
DVD VIDEOs
Disc logo
VIDEO CDs
Indicates that you can use only the remote
to do the task.
Indicates tips and hints for making the task
easier.
Indicates the functions for DVD VIDEOs.
Indicates the functions for VIDEO CDs.
Indicates the functions for Audio CDs.
Audio CDs
Contents
Disc size
Play time
This player conforms to the NTSC color system. You cannot play discs recorded in other color systems such as PAL or SECAM.
About 4 h (for
Audio + Video
12 cm
single-sided
DVD)/
about 8 h (for
double-sided
DVD)
8 cm
About 80 min.
(for
single-sided
DVD)/
about 160 min.
(for
double-sided
DVD)
Audio + Video
12 cm
74 min.
8 cm
20 min.
Audio
12 cm
74 min.
“DVD VIDEO” logo is a trademark.
8 cm
(CD single)
20 min.
Region code of DVDs you can play on this unit
Your DVD player has a region code printed on the back of the unit and will only play DVDs
that are labeled with identical region codes.
DVDs labeled
If you try to play any other DVD, the message “Playing this disc prohibited by area limits.” will
appear on the TV screen.
Depending on the DVD, no region code indication may be labeled even though playing the DVD is prohibited by the area limits.
ALL
will also play on this unit.
CD/DVD PLAYER
AC 110V 60Hz
NO.
22W
SONY CORPORATION
MODEL NO.
DVP–8306
MADE IN JAPAN 3-444-464-01
X
Region code
Note on playback operations of DVDs and VIDEO CDs
Some playback operations of DVDs and VIDEO CDs may be intentionally fixed by software producers. Since this player plays
DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be
EN
4
available. Also refer to the instructions supplied with the DVDs or VIDEO CDs.
Terms for discs
• Title
The longest sections of a picture or a music piece on a DVD;
a movie, etc, for a picture piece on a video software; or an
album, etc, for a music piece on an audio software. Each
title is assigned a title number enabling you to locate the
title you want.
• Chapter
Sections of a picture or a music piece that are smaller than
titles. A title is composed of several chapters. Each chapter
is assigned a chapter number enabling you to locate the
chapter you want. Depending on the disc, no chapters may
be recorded.
• Track
Sections of a picture or a music piece on a VIDEO CD or a
CD. Each track is assigned a track number enabling you to
locate the track you want.
Playing CDsGetting Started
Getting Started
DVD
structure
VIDEO CD
or CD
structure
Title
Chapter
Track
Index
Disc
Disc
• Index (CD) / Video Index (VIDEO CD)
A number that divides a track some sections to easily locate
the point you want on a VIDEO CD or a CD. Depending
on the disc, no indexes may be recorded.
• Scene
On a VIDEO CD with PBC functions, the menu screens,
moving pictures and still pictures are divided into sections
called “scenes.” Each scene is assigned a scene number
enabling you to locate the scene you want.
Note on PBC (Playback Control) (VIDEO CDs)
This player conforms to Ver. 1.1 and Ver. 2.0 of VIDEO CD
standards. You can enjoy two kinds of playback according to
the disc type.
Disc type
VIDEO CDs
without PBC
functions
(Ver. 1.1 discs)
VIDEO CDs
with PBC
functions
(Ver. 2.0 discs)
Discs that the player cannot play
The player cannot play discs other than the ones listed in the
table on page 4. CD-ROMs including PHOTO CDs, data
sections in CD-EXTRAs and DVD-ROMs, etc. can not be
played.
You can
Enjoy video playback (moving
pictures) as well as music.
Play interactive software using menu
screens displayed on the TV screen
(PBC Playback), in addition to the
video playback functions of Ver 1.1
discs. Moreover, you can play highresolution still pictures, if they are
included on the disc.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
EN
5
Getting Started
OPTICAL COAXIAL
DOLBY DIGITAL (AC-3)
PCM/
DIGITAL OUT
R–AUDIO 2–L
LINE OUT
VIDEO 2
R–AUDIO 1–L VIDEO 1
1
2
S VIDEO OUT
Getting Started
Unpacking
Check that you have the following items:
• Audio/Video/S-link connecting cord (1)
• S video cable (1)
• Remote commander (remote) RMT-D105A (1)
• Size AA (R6) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and
– on the batteries. When using the remote, point it at
the remote sensor g on the player.
z You can control Sony TVs and AV receivers using the
supplied remote
See page 30.
Hooking Up the System
Overview
This section describes how to hook up the CD/DVD
player to a TV (with audio/video input jacks) and/or
an amplifier. You cannot connect this player to a TV
without a video input connector. Be sure to turn off
the power of each component before making the
connections.
pTo listen to the sound through TV speakers
CD/DVD player
To AUDIO
OUT
: Signal flow
To VIDEO
OUT
To video
input
To audio
input
To an AC outlet
TV
To an AC outlet
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of
time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
pTo listen to the sound through speakers connected to
an amplifier (receiver)
CD/DVD player
Amplifier
(Receiver)
To
AUDIO
OUT
To audio
input
: Signal flow
R–AUDIO 1–L VIDEO 1
R–AUDIO 2–L
LINE OUT
VIDEO 2
1
2
S VIDEO OUT
To
VIDEO
OUT
OPTICAL COAXIAL
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
TV
To an AC
outlet
To video input
To an AC outlet
To an AC outlet
EN
6
Getting Started
Playing CDsGetting Started
Getting Started
Getting Started
What cords will I need?
Audio/Video connecting cord (supplied) (1)
Yellow Yellow
White (L)
Red (R)
S-link
White (L)
Red (R)
S-link
Hookups
When connecting the cords, be sure to match the colorcoded cord to the appropriate jacks on the components:
Yellow (video) to Yellow, Red (right) to Red and White
(left) to White. Be sure to make connections firmly to
avoid hum and noise.
pTo listen to the sound through TV speakers
TV
CD/DVD player
R–AUDIO 1–L VIDEO 1
R–AUDIO 2–L
VIDEO 2
LINE OUT
INPUT
VIDEO
L
AUDIO
R
Notes
• Do not connect this
player to a video deck.
Video deck TV
If you view the pictures
on your TV after
making the connections
shown on the right, a
picture noise may
appear.
CD/DVD
player
Connect
directly
• Depending on the TV or amplifier, sound distortion may
occur because the audio output level is high. In this case,
set “AUDIO ATT” in “INITIAL SETUP 2” to “ON” in the
setup display. For details, see page 35.
z If your TV has an S video input connector
Connect the component via the S VIDEO OUT connector
using the S video cable (supplied) instead of the video
connecting cord. You will get a better picture.
S video cable (supplied)
CD/DVD player
1
2
TV
S VIDEO IN
pTo listen to the sound through speakers connected to
an amplifier
TV
CD/DVD player
R–AUDIO 1–L VIDEO 1
R–AUDIO 2–L
VIDEO 2
LINE OUT
* Make the same connections when your amplifier conforms
to “Pro Logic.”
INPUT
VIDEO
L
AUDIO
R
Amplifier*
CD
L
R
S VIDEO OUT
z If you have a digital component such as an amplifier
with a digital connector, DAT or MD
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied).
When you play a DVD, set “DIGITAL OUT” in “INITIAL
SETUP 2” to “PCM” in the setup display. (page 35)
pWhen using an optical digital connectiong cord
Optical digital connectiong cord
(not supplied)
Take off the cap and plug in the optical digital
connectiong cord.
Amplifier with a
CD/DVD player
OPTICAL COAXIAL
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
digital connector, MD
deck, DAT deck, etc.
DIGITAL IN
OPTICAL
(Continued)
EN
7
Getting Started
pWhen using a coaxial digital connectiong cord
Coaxial digital connectiong cord
(not supplied)
Amplifier with a
digital connector, MD
CD/DVD player
OPTICAL COAXIAL
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
deck, DAT deck, etc.
DIGITAL IN
COAXIAL
Notes
• Refer to the instructions supplied with the component
to be connected.
• You cannot make digital audio recordings of discs
recorded in Dolby* Digital (AC-3) format directly
using an MD deck or DAT deck.
When you make the connections above, do not set
“DIGITAL OUT” in “INITIAL SETUP 2” to “DOLBY
DIGITAL/PCM.” If you do, a loud noise will
suddenly come out from the speakers, affecting
your ears or causing the speakers to be damaged.
pWhen using a coaxial digital connectiong cord
Coaxial digital connectiong cord
(not supplied)
Component with a
built-in Dolby Digital
CD/DVD player
OPTICAL COAXIAL
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
decoder
DIGITAL IN
COAXIAL
Note
Refer to the instructions supplied with the component to
be connected.
z If your TV has an S-link connector
You can control the CD/DVD player from the TV.
Connect the TV via the S-LINK connector using the S-link
cable (supplied). Refer to the instructions supplied with
the TV to be connected.
Audio/Video/S-link cord
(supplied)
z If you have a digital component with a built-in Dolby
Digital decoder
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial digital
connectiong cord (not supplied). When the component
with a built-in Dolby Digital decoder is connected, the
player plays DVDs with sound recorded in Dolby Digital
(AC-3) format while producing the effect of being in a
movie theater or a concert hall.
In the setup display, set “DIGITAL OUT” in “INITIAL
SETUP 2” to “DOLBY DIGITAL/PCM.” (page 35)
pWhen using an optical digital connectiong cord
Optical digital connectiong cord
(not supplied)
Take off the cap and plug in the optical digital
connectiong cord.
Component with a
CD/DVD player
OPTICAL COAXIAL
built-in Dolby Digital
decoder
DIGITAL IN
S-link
CD/DVD player
S
LINK
S-link
TV
S-LINK
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT
OPTICAL
* Manufactured under license from Dolby Laboratories.
“Dolby”, “AC-3”, “Pro Logic” and the double-D symbol a
are trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby
EN
8
Laboratories, Inc. All rights reserved.
Getting Started
Playing CDsGetting Started
Getting Started
Getting Started
Necessary Setup Before Using
the Player
Some setups are necessary for the player depending on
the TV or other components to be connected.
For details on using the setup display, see page 32.
For details on each setup display item, see pages 33 to
35.
pTo connect the player to a wide-screen TV
In the setup display, set “TV TYPE” in “INITIAL SETUP
1” to “16:9.”
pTo connect the player to a normal TV
In the setup display, set “TV TYPE” in “INITIAL SETUP
1” to “4:3 LETTER BOX” (default setting) or “4:3 PAN
SCAN.” For details, see page 34.
pTo listen to the sound through speakers connected to
an amplifier with a digital connector or to output the
sound to a digital component such as a DAT or MD deck
When you play a DVD, set “DIGITAL OUT” in “INITIAL
SETUP 2” to “PCM” in the setup display. This is default
setting.
pTo connect the player to a digital component with a
built-in Dolby Digital decoder
In the setup display, set “DIGITAL OUT” in “INITIAL
SETUP 2” to “DOLBY DIGITAL/PCM.”
Selecting the Language for
On-screen Display
You can select the language for the setup display or the
messages displayed on the screen. Default setting is
“ENGLISH.”
SET UP
ENTER
?/>/.//
1 Press SET UP and select “ ” using ?//, and
then press ENTER.
LANGUAGE SETUP
OSD: ENGLISH
AUDIO:
SUBTITLE:
1 2
ENGLISHDVD MENU:
ORIGINAL
AUDIO FOLLOW
Use the setup display to change the various settings for
the picture and sound.
For details, see page 32.
2 Select “OSD” using >/., then press / or ENTER.
LANGUAGE SETUP
OSD: ENGLISH
DVD MENU:
AUDIO:
SUBTITLE: AUDIO FOLLOW
1 2
FRENCH
SPANISH
3 Select the language you want using >/., then
press ENTER.
CHOIX DE LA LANGUE
ÉCRANS: FRANÇAIS
AUDIO:
SOUS-TITRE:
To cancel using the setup display on the way
Press SET UP.
Note
The languages you can select are the ones displayed in step 2.
For details, see page 33.
1 2
ANGLAISMENU DVD:
ORIGINAL
IDEM AUDIO
EN
9
Basic Operations
Basic Operations
Playing a DVD
243
Connect headphones.
Adjust the headphone
volume.
• The operating procedure of CDs
or VIDEO CDs is different from
that of DVDs.
For details, see pages 14 to 17.
z You can turn on the player
using the remote
Press POWER when the
indicator above the POWER
button on the front panel is
lit in red.
z After following Step 4
A DVD menu or title menu
may appear on the TV screen
(see page 13).
Note
If you leave the player or the
remote in pause or stop mode for
15 minutes, the screen saver
image appears automatically. To
disappear the screen saver, press
·. (If you want to set the screen
saver function to off, see page 34.)
Make settings on your TV.
1
Turn on the TV and select the video input so that you can view
the pictures from this player.
When using an amplifier
Turn on the amplifier and select the appropriate position so that
you can listen to the sound from this player.
Press POWER to turn on the player.
2
The indicator (red) above the POWER button changes to green
and the front panel display lights up.
Press §, and place the disc on the disc tray.
3
With the playback
side facing down
Press ·.
4
The disc tray closes, and the player starts playback (Continuous
Play). Adjust the volume on the TV or the amplifier.
10
Depending on the DVD, some operations may be different or restricted. Refer to the instructions supplied with
your disc.
EN
123
456
789
0
z When “RESUME” appears on
the front panel display
You can resume playback
from the point where you
stopped the DVD (page 25).
To play from the beginning
of the disc, see page 25.
Note
You may not be able to do
Resume Play depending on the
DVD.
=/+
Number buttons
SEARCH MODE
'/7
=/+
·
Basic Operations
Basic Operations
6
CLEAR
ENTER
&
/&
3/#
P
p
ENTER
z What are chapter and title?
See page 5.
Notes
Depending on the DVD, you may
not be able to do some of the
operations described on the right.
z Each time you press SEARCH
MODE
“CHAPTER SEARCH,”
“TITLE SEARCH” and
“TIME SEARCH” appear on
the TV screen.
z If you want to change the
search speed
Two speeds are available:
FF1) or FR10 (about 10
times the normal speed) and
FF2) or FR20 (about 30
times).
Each time you press 3 or #,
the indication changes as
follows:
FF1) (FR10) ,
FF2) (FR20)
§pP·
To
Stop
Pause
Resume play after pause
Play frame by frame
Play in slow motion
Go to the next chapter in
Continuous Play mode
Go back to the preceding
chapter in Continuous Play
mode
Select the chapter
Select the title
Locate a point using the time code
Locate a point while monitoring
the picture (Scan)
Stop play and remove the disc
ENTER
Press
p
P
P or ·
' or 7
&
or &
+
=
1 SEARCH MODE repeatedly until “CHAPTER
SEARCH” appears on the TV screen.
2 Number buttons to select the chapter number,
then ENTER or ·.
1 SEARCH MODE repeatedly until “TITLE
SEARCH” appears on the TV screen.
2 Number buttons to select the title number, then
ENTER or ·.
1 SEARCH MODE repeatedly until “TIME
SEARCH” appears on the TV screen.
2 Number buttons to enter a time code, then
ENTER or ·.
3/#. You will not hear the sound during this
operation. When you find the point you want,
press · to return to the normal speed.
6
Basic Operations
If you have made a mistake when you press the number button
Press CLEAR, then the correct number button.
11
EN
Basic Operations
Notes
• Depending on the DVD, you
may not be able to do some of
the operations described on the
right.
• When you play back a DVD at
twice the normal speed in
either direction, the sounds of
the picture will come out from
the LINE OUT (AUDIO 1, 2)
connectors. The sounds are
lower than the ones at normal
speed. In this case, no sounds
come out from the DIGITAL
OUT OPTICAL and COAXIAL
connectors.
To play at various speeds/frame-by-frame
Using the click shuttle and the JOG button/indicator on the player,
you can playback a DVD with various speed or frame-by-frame.
Each time you press JOG, it changes between shuttle mode and jog
mode.
pTo change the playback speed (Shuttle mode)
Turn the click shuttle. The playback speed changes depending on the turning
direction and angle as follows:
FF2) (about 30 times the normal speed)
<
FF1) (about 10 times the normal speed)
<
×2” (about twice the normal speed)
<
PLAY( (Normal speed)
<
SLOW1& (playback direction)
<
SLOW2& (playback direction
– slower than “SLOW1&”)
<
PAUSE P
<
SLOW2 (opposite direction
SLOW1 (opposite direction)
×2“ (about twice the normal speed : opposite direction)
FR10 (about 10 times the normal speed)
FR20 (about 30 times the normal speed)
&
– slower than “SLOW1 ”)
<
&
<
<
<
&
JOG
Click shuttle
12
EN
If you turn the click shuttle quickly, the playback speed goes to FF2)/FR20
at once.
To return to Continuous Play
Press ·.
pTo play the DVDs frame-by-frame changing the playback speed (Jog mode)
1 Press JOG.
The JOG button lights up during jog mode. When you press JOG, the
playback is paused.
2 Turn the click shuttle.
Depending on the turning speed, the playback goes to frame-by-frame toward
the turning direction of the click shuttle. If you turn the click shuttle with
constant speed for a while, the playback speed goes to slow or normal.
To return to Continuous Play
Press ·.
Basic Operations
Basic Operations
Notes
• Depending on the DVD, you
may not be able to select the
title.
• Depending on the DVD, a “title
menu” may simply be called a
“menu” or “title ” in the
instructions supplied with the
disc. “Press ENTER.” may also
be expressed as “Press
SELECT.”
Using the Title Menu
A DVD is divided into long sections of a picture or a music piece
called “titles.” When you play the DVD which contains several titles,
you can select the title you want using the title menu.
?/>/.//
DVD MENU
TITLE
ENTER
?/>/.//
ENTER
TITLE
Press TITLE.
1
The title menu appears on the TV screen. The contents of the
menu varies from disc to disc.
DVD
MENU
Basic Operations
z If you want to select the
language for the DVD menu
Change the setting using
“LANGUAGE SETUP” in
the setup display (see page
33).
Note
Depending on the DVD, a “DVD
menu” may simply be called a
“menu” in the instructions
supplied with the disc.
Press ?/>/.// to select the title you want to play.
Depending on the disc, you can use the number buttons to
2
select the title.
Press ENTER.
The player starts playing the selected title.
3
Using the DVD menu
Some DVDs allow you to select the disc contents using the menu.
When you play these DVDs, you can select the language for the subtitles, the language for the sound, etc., using the DVD menu.
Press DVD MENU.
1
The DVD menu appears on the TV screen. The contents of the
menu vary from disc to disc.
Press ?/>/.// to select the item you want to change.
2
Depending on the disc, you can use the number buttons to
select the item.
To change other items, repeat Step 2.
3
Press ENTER.
4
13
EN
Basic Operations
Basic Operations
Playing a CD/VIDEO CD
243
Connect headphones.
Adjust the headphone
volume.
• The operating procedure of DVDs
is different from that of CDs or
VIDEO CDs.
For details, see pages 10 to 13.
z You can turn on the player
using the remote
Press POWER when the
indicator above the POWER
button on the front panel is
lit in red.
z After following Step 4
The menu screen may
appear on the TV screen
depending on the VIDEO
CD. You can play the disc
interactively, following the
instructions on the menu
screen. (PBC Playback, see
page 17.)
Note
If you leave the player or the
remote in pause or stop mode for
15 minutes, the screen saver
image appears automatically. To
disappear the screen saver, press
·. (If you want to set the screen
saver function to off, see page 34.)
Make settings on your TV.
1
Turn on the TV and select the video input so that you can view
the pictures from this player.
When using an amplifier
Turn on the amplifier and select the appropriate position so that
you can listen to the sound from this player.
Press POWER to turn on the player.
2
The indicator (red) above the POWER button changes to green
and the front panel display lights up.
Press §, and place the disc on the disc tray.
3
With the label side
facing up
Press ·.
4
The disc tray closes and the player starts playback (Continuous
Play). Adjust the volume on the TV or the amplifier.
14
Depending on the VIDEO CD, some operations may be different or restricted. Refer to the instructions supplied
with your disc.
EN
z When “RESUME” appears on
123
456
789
0
the front panel display
You can resume playback
from the point where you
stopped the CD/VIDEO CD
(page 25).
To play from the beginning
of the disc, see page 25.
=/+
6
Number buttons
SEARCH
MODE
7
=/+
·
P
Basic Operations
Basic Operations
CLEAR
ENTER
&
3/#
p
ENTER
z What is a track?
See page 5.
z What is an index?
See page 5.
z What is a scene?
See page 5.
z If you want to change the
search mode
Press SEARCH MODE. Each
time you press in case of a
VIDEO CD, “SCENE
SEARCH,” “TRACK
SEARCH” and “V (video).
INDEX SEARCH” appear on
the TV screen. In case of a
CD, only “TRACK
SEARCH” appears.
z If you want to change the
search speed
Two speeds are available:
FF1) or FR10 (about 10
times the normal speed) and
FF2) or FR20 (about 30
times).
Each time you press 3 or #,
the indication changes as
follows:
FF1) (FR10) ,
FF2) (FR20)
Note
Some discs do not allow you to
start playing from a particular
scene. In this case, if you do
Scene Search before you start
playing, the player starts playing
from scene 1. If you do Scene
Search while playing a disc, the
player starts playing from the
current scene.
§pP·
To
Stop
Pause
Play frame by frame
Resume play after pause
Go to the next track in
Continuous Play mode
Go back to the preceding
track in Continuous Play
mode
Play in slow motion
Select the track
Select the scene before you start
playing a VIDEO CD with PBC
functions and during PBC playback
(Scene Search)
Locate a point while monitoring
the picture (Scan)
Stop play and remove the disc
ENTER
Press
p
P
P or ·
7
+
=
&
1 SEARCH MODE repeatedly until “TRACK
SEARCH” appears on the TV screen.
2 Number buttons to select the track number,
then ENTER or ·.
1 SEARCH MODE repeatedly until “SCENE
SEARCH” appears on the TV screen.
2 Number buttons to select the scene number,
then ENTER or ·. (To check the current scene
number, press DISPLAY. The scene number
appears at the left top of the TV screen.)
3/#. You will not hear the sound during this
operation. When you find the point you want,
press · to return to the normal speed.
6
If you have made a mistake when you press the number button
Press CLEAR, then the correct number button.
Basic Operations
EN
15
Basic Operations
Note
Depending on the VIDEO CD,
you may not do some of the
operations described on the right.
To play at various speeds / frame-by-frame
Using the click shuttle and the JOG button/indicator on the player,
you can playback a CD/VIDEO CD with various speed or frame-byframe. Each time you press JOG, it changes between shuttle mode and
jog mode.
JOG
Click shuttle
pTo change the playback speed (Shuttle mode)
Turn the click shuttle. The playback speed changes depending on the turning
direction and angle as follows:
FF2) (Faster than “FF1)”)
<
FF1 )
<
×2” (about twice the normal speed)
<
PLAY( (Normal speed)
<
SLOW1& (playback direction)
– VIDEO CD Only –
<
SLOW2& (playback direction
– Slower than “SLOW1&”)
– VIDEO CD Only –
<
PAUSE P
<
FR10
<
FR20 (Faster than “FR10”)
16
If you turn the click shuttle quickly, the playback speed goes to FF2)/FR20
at once.
To return to Continuous Play
Press ·.
pTo play the VIDEO CDs frame-by-frame changing the playback speed (Jog mode –
VIDEO CD Only)
1 Press JOG.
The JOG button lights up during jog mode. When you press JOG, the
playback is paused.
2 Turn the click shuttle.
Depending on the turning speed, the playback goes to frame-by-frame toward
the playback direction only. If you turn the click shuttle with constant speed for
a while, the playback speed goes to slow or normal.
To return to Continuous Play
Press ·.
EN
Basic Operations
123
456
789
0
Basic Operations
z When playing VIDEO CDs with
PBC functions
PBC playback starts
automatically.
z To cancel PBC playback of a
VIDEO CD with PBC functions
and play the disc in
Continuous Play mode
There are two ways.
• Before you start playing,
select the track you want
using =or +, then
press ENTER or ·.
• Before you start playing,
select the track number
using the number buttons
on the remote, then press
ENTER or ·.
“Play without PBC”
appears on the TV screen
and the player starts
Continuous Play. You
cannot play still pictures
such as a menu screen.
Playing VIDEO CDs with PBC Functions (PBC Playback –
VIDEO CD Only)
When playing VIDEO CDs with PBC functions (Ver. 2.0 discs), you
can enjoy simple interactive operations, operations with search
functions, etc.
PBC Playback allows you to play VIDEO CDs interactively, following
the menu screen on the TV screen.
On this player, you can use the number buttons, ENTER, =, +,
>/. and ˆ (RETURN) during PBC Playback.
>/.
ENTER
Number
buttons
ENTER
=/+
ˆ(RETURN)
ˆ(RETURN)
ENTER
=/+
Basic Operations
Note
Depending on the VIDEO CD,
“Press ENTER” in Step 3 may be
expressed as “Press SELECT” in
the instructions supplied with the
disc.
Start playing a VIDEO CD with PBC functions, following Steps
1
1 to 4 in “Playing a CD/VIDEO CD” on page 14.
Select the item number you want.
2
On the player
Press >/. to select the item number.
On the remote
Press the number button of the item you want.
Press ENTER.
3
Follow the instructions on the menu screen for interactive
operations.
4
Refer to the instructions supplied with the disc, as the operating
procedure may differ according to the VIDEO CD.
>/.
Going back to the menu screen
Press ˆ, =, or +.
17
EN
Playing Discs in Various Modes
Using the On-Screen Display
Z
You can check the operating status of the player and
the information about the disc using the on-screen
display on the TV screen.
pDisplay information of the on-screen display 2 mode
Current title
number (total
number of
titles)
Disc type
Playing time
of the current
chapter*
Playing
status
Current chapter
number (total
number of
chapters in the
current title)
DISPLAY
123
456
789
0
TIME
When playing back or stopping a DVD
Press DISPLAY.
Each time you press the DISPLAY button, the onscreen display changes as follows:
On-screen display 1
.
On-screen display 2
.
On-screen display 3
.
On-screen display off
pDisplay information of the on-screen display 1 mode
Current title
number
Current chapter
number
?
Playing status
DVD
TITLE:
CHAPTER:
SUBTITLE:
AUDIO:
ANGLE:
Current language for the
subtitles (total number of
languages for subtitles)
32 ( 50 )
30 ( 50 )
ENGLISH ( 32 )
ENGLISH ( 8 )
DOLBY DIGITAL
1 ( 9 )
Selected angle
(total number of
angles)
PLAY
1 : 32 : 55
<
CHAPTER
3 / 2. 1
Note
Some information may not be displayed depending on a
DVD.
* In display 1 or 2 mode, each time you press TIME the
information changes as shown below.
Playing time of the current chapter
.
Remaining time of the current chapter
.
Playing time of the current title
.
Remaining time of the current title
** “PCM” or “DOLBY DIGITAL” is displayed. In “DOLBY
DIGITAL” case, the channels in the playing track are
displayed by number as follows.
?
>
Current
language
for the
sound (total
number of
languages
for the
sound)
Current audio
format**
18
Current
play mode
EN
TITLE 32 PLAY
CHAPTER 30
ALL
REPEAT
1 : 32 : 55
<
CHAPTER
>
Playing time
of the
current
chapter*
The case of Dolby Digital (AC-3) 5.1 ch:
Rear component 2
Front component 2 +
Center component 1
LFE component 1
pDisplay information of the on-screen display 3 mode
While playing a disc, the approximate bit rate of the
playback picture is always displayed by Mbps (Mega bit
per second).
BIT RATE
0510
Bit rate of the playback picture
Playing CDs in Various Modes
Playing Discs in Various Modes
z What is bit rate?
Bit rate refers to the amount of video data per second in a
disc. The higher the bit rate is, the larger the amount of
data. However, this does not always mean that you can
get higher quality pictures.
pDisplay information of the on-screen display off mode
No information is displayed. (Messages, etc., will be
displayed.)
When playing back or stopping a CD/VIDEO
CD
Press DISPLAY.
Each time you press the button, the on-screen display
changes as follows:
On-screen display 1
.
On-screen display 2
.
On-screen display off
pDisplay information of the on-screen display 1 mode
Current track number
?
Playing status
pDisplay information of the on-screen display 2 mode
Disc type
VIDEO CD
PBC OFF
TRACK:
V.INDEX:
PBC Status
(VIDEO CD Only)
<
11 ( 50 )
8
Playing status
PLAY
12 : 07
TRACK
Playing time
of the current
>
track*
Current track
number (total
track number)
Current index
number
• During PBC playback (VIDEO CD Only)
Disc type
VIDEO CD
PBC ON
SCENE:
PBC Status
122 ( 159 )
Playing status
PLAY
12 : 07
Playing
time
Current scene
number (total
scene number)
Current
index
number
Current
play
mode
TRACK 11
INDEX 8
TRACK
REPEAT
PLAY
12 : 07
<
TRACK
• During PBC playback (VIDEO CD Only)
Current
play
mode
Current scene
number
SCENE 122
TRACK
REPEAT
Playing status
PLAY
05 : 27
>
Playing
time of
the
current
track*
Playing
time
* In display 1 or 2 mode, each time you press TIME, the
information changes as shown below.
Playing time of the current track
.
Remaining time of the current track
.
Playing time of the disc
.
Remaining time of the disc
While you are doing Shuffle Play, Program Play, or
PBC Playback, the playing time of the disc and the
remaining time of the disc are not displayed.
?
pDisplay information of the on-screen display off mode
No information is displayed. (Messages, etc., will be
displayed.)
19
EN
Playing Discs in Various Modes
Using the Front Panel Display
Z
Playing time and number of
the current chapter
You can check information about the disc, such as the
total number of the titles or the tracks or remaining
time, using the front panel display.
123
456
789
0
TIME
When playing back a DVD
pDisplay information while playing the disc
Lights up while playing
Lights up when you
can do Resume Play
Playing status
Lights up when
you can switch
the angles
the sections with the
auto pause signal
Current
sound status
Remaining time of
the current chapter
Playing time and number of
the current title
Remaining time of
the current title
Press TIME
Press TIME
Press TIME
Press TIME
Notes
• Depending on the DVD, the chapter number or time may
not appear.
• While you are doing Shuffle Play or Program Play, the
playing time of the disc and the remaining time of the disc
are not displayed.
When playing back a CD/VIDEO CD
pDisplay information while playing a disc
20
EN
Disc type
Current
title
number
Current
chapter
number
Current
play
mode
Lights up
Playing time
during
programming
pChecking the remaining time
Press TIME.
Each time you press TIME while playing the disc, the
display changes as shown in the chart to the right. The time
information in the on-screen display 1 and 2 also changes
each time you press TIME.
Lights up when you can
Playing
status
Disc type
do Resume Play
Lights up while
PBC playback
(VIDEO CD Only)
Current
track
number
Current
index
number
Lights up
during
programming
Playing time
Current play
mode
z When playing VIDEO CDs with PBC functions
The current scene number is displayed instead of the
current track number and the current index number. In
this case, the front panel display does not change when
you press TIME.
Current
sound
status
pChecking the remaining time
Press TIME.
Each time you press TIME while playing a disc, the display
changes as shown in the chart below. The time information
in the on-screen display 1 and 2 also changes each time you
press TIME.
Playing time and number of
the current track
Playing CDs in Various Modes
Playing Discs in Various Modes
Remaining time of the current
track
Playing time of the disc
Remaining time of the disc
Press TIME
Press TIME
Press TIME
Press TIME
Note
While you are doing Shuffle Play, Program Play or PBC
playback, the playing time of the disc and the remaining time
of the disc are not displayed.
21
EN
Playing Discs in Various Modes
Playing Discs in Various Modes
Playing Repeatedly
Repeating the current title or chapter
(Repeat Play)
You can play all the titles/tracks on a disc, a single
title/chapter/track or a specific portion repeatedly.
123
456
789
0
REPEAT A˜B
·
Repeating all the titles or all the tracks on
a disc
In Shuffle or Program Play mode, the player repeats
the titles or tracks in the shuffled or programmed
order.
You cannot do Repeat Play during PBC playback of
VIDEO CDs (page 17). You may not be able to do
Repeat Play depending on the DVD.
Press REPEAT during playback.
“ALL REPEAT” appears on the screen and “REPEAT”
appears on the front panel display. The player repeats
the titles/chapters/tracks as follows:
When the disc is played in
Continuous Play
(page 10, 14)
Shuffle Play
(page 23)
Program Play (page 24)
The player repeats
All the titles/all the tracks
All the titles or tracks in
random order
Programmed titles/
chapters/tracks
CLEAR
You can repeat only the current title or chapter in
Continuous Play mode. You may not be able to do
Repeat Play depending on the DVD.
pRepeating the current title
While the title you want is being played, press REPEAT
repeatedly until “TITLE REPEAT ” appears on the TV
screen.
The player repeats the current title.
pRepeating the current chapter
While the chapter you want is being played, press REPEAT
repeatedly until “CHAPTER REPEAT ” appears on the TV
screen.
The player repeats the current chapter.
“REPEAT 1” appears on the front panel display.
“CHAPTER” is displayed when
you select the current chapter
T
TLEI
REPEAT
To cancel repeating the current title or chapter
Press CLEAR.
Repeating the current track
You can repeat only the current track in Continuous
Play mode.
While the track you want is being played, press
REPEAT until “TRACK REPEAT ” appears on the TV
screen.
“REPEAT 1” appears on the front panel display and
the player repeats the current track.
TRACK
REPEAT
22
To cancel repeating all the titles or all the tracks on a disc
Press CLEAR.
To cancel repeating the current track
Press CLEAR.
Notes
Repeat play is canceled when you turn the power off.
EN
Repeating a specific portion Z
0
(A˜B Repeat)
You can play a specific portion of a title, chapter, track
repeatedly. This is useful when you want to memorize
lyrics.
During PBC Playback of VIDEO CDs (page 17), this
function is available only while playing moving
pictures.
You may not be able to do Repeat Play depending on
the DVD.
1 During playback, when you find the starting point
(point A) of the portion to be played repeatedly,
press A˜B.
The starting point (point A) is set. “A-B REPEAT”
is appears on the TV screen and “B” flashes.
A
B-
REPEAT
Playing CDs in Various Modes
Playing Discs in Various Modes
Playing in Random Order
(Shuffle Play)
You can have the player “shuffle” titles or tracks and
play them in a random order.
SHUFFLE
·
CLEAR
“REPEAT A-” also appears on the front panel
display and “B” flashes.
2 When you reach the ending point (point B), press
A˜B again.
“A-B REPEAT” on the TV screen disappears and
the player starts repeating this specific portion.
“REPEAT A-B” appears on the front panel display
during A˜B repeat play.
To cancel A˜B Repeat
Press CLEAR.
To cancel setting halfway
Press CLEAR.
Notes
•A˜B Repeat is canceled when:
– you open or close the disc tray
– you turn the power off
• When you set A˜B Repeat, the settings for Shuffle Play
and Program Play are canceled.
• You may not be able to set A˜B Repeat, depending on the
scene of a DVD or a VIDEO CD.
1 Press SHUFFLE.
2 Press ·.
(During playback, the player starts Shuffle Play
when you follow the step 1.)
To cancel Shuffle Play
Press CLEAR.
Notes
• The Shuffle Play is canceled when:
– you open or close the disc tray
– you turn the power off
• You may not be able to do Shuffle Play depending on the
DVD.
• When you play a DVD, you can do Shuffle Play only by
titles.
23
EN
Playing Discs in Various Modes
789
Creating Your Own Program
(Program Play)
You can arrange the order of the titles, chapters or
tracks on the disc and create your own program. The
program can contain up to 99 titles, chapters and
tracks.
PROGRAM
·
0
CLEAR
ENTER
?/>/.//
3 Select the title, chapter or track you want to
program using >/., then press ENTER.
For example, select title or track 2.
(You can also use the number buttons and ENTER
button to select. In this case, the selected number
is displayed on the screen.)
pWhen playing a DVD
When both titles and chapters are recorded on the disc,
select the title, then the chapter.
PROGRAM
ALL CLEAR
1 . T TLE02I
2 . T TLE––I
3 . T TLE––I
4 . T TLE––I
5 . T TLE––I
6 . T TLE––I
7 . T TLE––I
8 . T TLE––I
9 . T TLE––I
ENTER
[PLAY]
[PROGRAM]
CT
––01ALL
01
02 02
03 03
04 04
05
06
07
1 Press PROGRAM.
The programming display appears.
“TRACK__” is displayed when
you play a VIDEO CD or a CD.
PROGRAM
ALL CLEAR
1 . T TLE––I
2 . T TLE––I
3 . T TLE––I
4 . T TLE––I
5 . T TLE––I
6 . T TLE––I
7 . T TLE––I
8 . T TLE––I
9 . T TLE––I
ENTER
[PLAY]
2 Press /.
“01” is highlighted.
PROGRAM
ALL CLEAR
1 . T TLE––I
2 . T TLE––I
3 . T TLE––I
4 . T TLE––I
5 . T TLE––I
6 . T TLE––I
7 . T TLE––I
8 . T TLE––I
9 . T TLE––I
ENTER
[PLAY]
T
––
01
02
03
04
05
06
07
[PROGRAM]
Chapter
Title
CT
––01ALL
01
02 02
03 03
04 04
05 05
06
07
[PROGRAM]
PROGRAM
ALL CLEAR
1 . T TLE02–03I
2 . T TLE––I
3 . T TLE––I
4 . T TLE––I
5 . T TLE––I
6 . T TLE––I
7 . T TLE––I
8 . T TLE––I
9 . T TLE––I
ENTER
[PLAY]
[PROGRAM]
p When playing a VIDEO CD or CD
Select the track you want to program.
Total time of the
programmed tracks
PROGRAM
ALL CLEAR
1 .TRACK0 2
2 .TRACK– –
3 .TRACK– –
4 .TRACK– –
5 .TRACK– –
6 .TRACK– –
7 .TRACK– –
8 .TRACK– –
9 .TRACK– –
ENTER
[PLAY]
0 15 30::
[PROGRAM]
T
––
01
02
03
04
05
06
07
T
––
01
02
03
04
05
06
24
EN
4 To program other titles, chapters or tracks, repeat
Step 3.
The programmed titles, chapters or tracks are
displayed from 02 in order.
PROGRAM
ALL CLEAR
1 . T TLE02–02I
2 . T TLE15I
3 . T TLE03I
4 . T TLE05I
5 . T TLE07–14I
6 . T TLE––I
7 . T TLE––I
8 . T TLE––I
9 . T TLE––I
ENTER
[PLAY]
T
––
01
02
03
04
05
06
07
[PROGRAM]
Playing CDs in Various Modes
Playing Discs in Various Modes
Resuming Playback from the
Point Where You Stopped a
Disc (Resume Play)
The player stores the point where you stopped a disc if
“RESUME” appears on the front panel display. In this
case, you can resume playback from that point.
As long as you do not open the disc tray, Resume Play
is available even if you turn the power off.
5 Press · to start Program Play.
To cancel Program Play
Press CLEAR.
To cancel programming
Press PROGRAM.
To change programming
1 In Step 2, select the program number of the title, chapter or
track you want to change using >/..
2 Follow Step 3 for new programming.
To cancel the programmed order
To cancel all the titles, chapters or tracks in the programmed
order, select “ALL CLEAR” in Step 2.
To cancel the selected program, select the program using >/.
in Step 2 then press CLEAR, or select “--” in Step 3 and then
press ENTER.
z The program remains even after the Program Play
ends
When you press ·, you can play the same program
again.
·
p
1 While playing a disc, press p to stop playback.
“RESUME” appears in the front panel display and
“When playing next time, disc restarts from point
you stopped.” appears on the TV screen.
If “RESUME” does not appear, Resume Play is not
available.
2 Press ·.
The player starts playback from the point you
stopped the disc in Step 1.
z To play from the beginning of the disc
When “RESUME” appears on the front panel display
before you start playing, press p to turn off “RESUME,”
then press ·.
z You can do Repeat Play or Shuffle Play of the
programmed titles, chapters or tracks
During Program Play, press REPEAT or SHUFFLE.
Notes
• The number of titles, chapters or tracks displayed are that
of the titles, chapters or tracks recorded on a disc.
• The program is canceled when:
– you open or close the disc tray
– you turn the power off
• You may not be able to do Program Play depending on the
DVD.
• While you are doing PBC playback, you cannot set a
program unless you stop playback once.
Notes
• You may not do Resume Play depending on the DVD.
• Resume Play is not available in Shuffle or Program Play
mode.
• Depending on where you stopped the disc, the player may
resume playback from a different point.
• The point where you stopped playing is cleared when:
– you open or close the disc tray
– you disconnect the AC power cord
– you change the play mode
– you start playback after selecting a title, chapter or track
– you change the settings of “DVD MENU”, “AUDIO” or
“SUBTITLE” in “LANGUAGE SETUP” in the setup display
– you change the settings of “TV TYPE”, “PARENTAL
CONTROL” in ”INITIAL SETUP 1” in the setup display
25
EN
Playing Discs in Various Modes
123
456
789
0
Changing the Sounds Z
With DVDs on which multilingual sounds are
recorded, you can select the language you want while
playing the DVD.
With multiplex VIDEO CDs, you can select the sound
from the right or left channel and listen to the sound of
the selected channel through both the right and left
speakers. In this case, the sound loses the stereo effect.
123
456
789
0
AUDIO
CHANGE
Press AUDIO CHANGE while playing a disc.
Each time you press the button, the indication and the
language/sound from the speakers change as follows:
Displaying the SubtitlesZ
With DVDs on which subtitles are recorded, you can
turn the subtitles on and off whenever you want while
playing the DVD. With DVDs on which multilingual
subtitles are recorded, you can change the subtitles
whenever you want while playing the DVD.
SUBTITLE
CHANGE
Turning the Subtitles On and Off
Press SUBTITLE ON/OFF while playing a DVD.
Subtitles appear on the TV screen.
SUBTITLE
ON/OFF
EN
26
pWhen playing a DVD
AUDIO 1 n AUDIO 2 n .....
n
AUDIO
3:PORTUGUESE
pWhen playing a VIDEO CD or a CD
1/L : The sound of the left channel
.
2/R : The sound of the right channel
.
Stereo : The standard stereo sound
(1/L 2/R)
?
Notes
• Depending on the DVD, you may not be able to change the
languages even if multilingual sounds are recorded on the
DVD.
• While playing the CD/VIDEO CD, the standard stereo
playback will be resumed when:
– you open or close the disc tray
– you turn the power off
• While playing the DVD, the sound may be changed when:
– you open or close the disc tray
– you change the title
• If the language is indicated in a four-digit number, refer to
the Language Code List on page 46.
To turn off the subtitles
Press SUBTITLE ON/OFF again.
Notes
• When playing the DVD on which no subtitles are recorded,
no subtitles appear even if you press SUBTITLE ON/OFF.
• Depending on the DVD, you may not be able to turn the
subtitles on even if they are recorded on the DVD.
• Depending on the DVD, you may not be able to turn the
subtitles off.
• If the language is indicated in a four-digit number, refer to
the Language Code List on page 46.
Changing the Subtitle Language
When subtitles are turned off, press SUBTITLE ON/
OFF to turn on the subtitles.
While playing a DVD, press SUBTITLE CHANGE
repeatedly until the subtitles you want appear on the
TV screen.
SUBTITLE 1 n SUBTITLE 2 n ...
n
SUBTITLE
1:ENGLISH
Playing CDs in Various Modes
Playing Discs in Various Modes
Changing the Angles Z
With DVDs on which various angles (multi-angles) for
a scene are recorded, you can change the angles
whenever you want while playing the DVD.
123
456
789
0
ANGLE
CHANGE
Notes
• The type and number of languages for subtitles vary from
disc to disc.
• Depending on the DVD, you may not be able to change the
subtitles even if multilingual subtitles are recorded on the
DVD.
• While playing the DVD, the subtitle may be changed when:
– you open or close the disc tray
– you change the title
When “ANGLE” appears on the front panel display
while playing a DVD, press ANGLE CHANGE
repeatedly until you get the angle you want.
ANGLE 1 n ANGLE 2 n ...
n
ANGLE
1
z You can specify the angle beforehand
Specify the angle when “ANGLE” is not displayed on the
front panel display. When a scene on which multi-angles
are recorded comes, the angle is automatically selected.
Notes
• The number of angles varies from disc to disc or from scene
to scene. The number of angles that can be changed on a
scene is that of angles recorded for that scene.
• Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
27
EN
Playing Discs in Various Modes
Limiting Playback by Children
2 Select “INITIAL SETUP 1” using ?//, then
press ENTER.
(Parental Control) Z
Playing some DVDs can be limited depending on the
age of users. The “Parental Control” function allows
you to set a playback limitation level.
Number
buttons
SET UP
123
456
789
0
ENTER
?/>/.//
2
INITIAL SETUP 1
TV TYPE:
DIMMER:
BACKGROUND:
SCREEN SAVER: ON
PARENTAL CONTROL
1
4:3 LETTER BOX
ENTER SETUP
QUIT
OFFAUTO PLAY:
BRIGHT
BLUE
3 Select “PARENTAL CONTROL” using >/., then
press ENTER.
pWhen you have not entered a password yet
The display for entering a password appears.
INITIAL SETUP 1
PARENTAL CONTROL
Entry password. Enter
a number in 4 figures,
then press .
1 2
ENTER
1 Press SET UP to display the setup display on the
TV screen before playing.
2
INITIAL SETUP 1
TV TYPE:
DIMMER:
BACKGROUND:
SCREEN SAVER: ON
PARENTAL CONTROL
1
4:3 LETTER BOX
ENTER SETUP
QUIT
OFFAUTO PLAY:
BRIGHT
BLUE
pWhen you have already entered a password
The display for confirming the password appears.
Skip Step 4.
INITIAL SETUP 1
PARENTAL CONTROL
Enter password, then
press .
1 2
ENTER
28
EN
Playing CDs in Various Modes
Playing Discs in Various Modes
4 Enter a password in 4 figures using the number
buttons, then press ENTER.
The figures change to asterisks (
), and the
display for confirming the password appears.
INITIAL SETUP 1
PARENTAL CONTROL
To confirm, enter
password again, then
press .
1 2
ENTER
5 To confirm your password, enter it using the
number buttons, then press ENTER.
The display for setting the playback limitation
level and changing the password appears.
INITIAL SETUP 1
PARENTAL CONTROL
STANDARD:
CHANGE PASSWORD
1 2
OFFLEVEL:
USA
7 Select an area as the standard for playback
limitation level using >/., then press /.
When you select “OTHERS”, select and enter the
standard code in the table below using number
buttons.
INITIAL SETUP 1
PARENTAL CONTROL
STANDARD:
CHANGE PASSWORD
1 2
ENTER SETUP
QUIT
OFFLEVEL:
USA
8 Select “LEVEL” using >/., then press /.
INITIAL SETUP 1
PARENTAL CONTROL
STANDARD:
CHANGE PASSWORD NC17
1 2
ENTER SETUP
QUIT
8.
7.
6.
5.
4.
3.
2.
OFFLEVEL:
PG13
PG
R
ENTER SETUP
QUIT
6 Select “STANDARD” using >/., then press /.
INITIAL SETUP 1
PARENTAL CONTROL
STANDARD:
CHANGE PASSWORD
1 2
ENTER SETUP
QUIT
OFFLEVEL:
USA
OTHERS
9 Select the level you want using >/., then press
ENTER.
INITIAL SETUP 1
PARENTAL CONTROL
LEVEL:
STANDARD:
CHANGE PASSWORD
The lower the value is, the more strict the
limitation.
To return to the normal screen
Press SET UP.
To turn off the Parental Control function and play the DVD
after entering your password
Set “LEVEL” to “OFF” in Step 9, then press ·.
1 2
ENTER SETUP
QUIT
PG134.
USA
29
EN
Loading...