Sony DVP NS50, DVP NS41, DVP NS52 Schematic

DVP-NS50P/NS41P/NS52P

SERVICE MANUAL

Photo : DVP-NS50P

RMT-D175A

RMT-D175A/RMT-D175P

US/Canadian Model

DVP-NS50P/NS41P

Australia/NZ Model

Korean Model

Middle East Model

Singapore Model

Taiwan Model

DVP-NS50P/NS52P

Malaysia Model

E Model

Hong Kong Model

IND, PAK, MAR Model

Iran Model

MX Model

PX Model

Notes: US, Canadian and Oceania model only

System

Laser: Semiconductor laser Signal format system:

PAL/NTSC: (NS52P/NS50P Except US,CND,MX,PX) NTSC: (NS41P/NS50P:US,CND,MX,PX)

Audio characteristics

Frequency response: DVD VIDEO (PCM

96 kHz): 2 Hz to 44 kHz (±1.0 dB)/ DVD VIDEO (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)/CD: 2 Hz to 20 kHz (±0.5 dB)

Signal-to-noise ratio (S/N ratio): 115 dB

(LINE OUT L/R (AUDIO) jacks only)

Harmonic distortion: 0.003% Dynamic range: DVD VIDEO: 103 dB/

CD: 99 dB

Wow and flutter: Less than detected value

(±0.001% W PEAK)

Outputs

(Jack name: Jack type/Output level/

Load impedance)

LINE OUT (AUDIO): Phono jack/

2 Vrms/ 10 kilohms

DIGITAL OUT (OPTICAL)

Optical output jack/–18 dBm (wave length 660 nm) (DVP-NS52P/ NS50P:AUS,SP,TW,HK,ME2,ME5,EA,IR,KR)

DIGITAL OUT (COAXIAL): Phono jack/

0.5 Vp-p/75 ohms

COMPONENT VIDEO OUT

(Y, PB /CB, PR/CR)

Phono jack/Y: 1.0 Vp-p, PB/CB, PR /CR: 0.7 Vp-p/75 ohms (NS52P/NS50P Except US,CND,PX,MX,E)

SPECIFICATIONS

COMPONENT VIDEO OUT

(YZ, PB, PR)

Phono jack/Y: 1.0 Vp-p/PB,PR: interface*1 = 0.648 Vp-p, progressive or interface*2 = 0.7 Vp-p/75 ohms

BLACK LEVEL (COMPONENT OUT) is ON

BLACK LEVEL (COMPONENT OUT) is OFF (NS41P/NS50P:US,CND,PX,MX,E)

LINE OUT (VIDEO): Phono jack/

1.0 Vp-p/75 ohms

S VIDEO OUT

4-pin mini DIN/Y: 1.0 Vp-p, C: 0.3 Vp-p (PAL), 0.286 Vp-p (NTSC)/75 ohms (NS52P/NS50P: Except US,CND,PX,MX)

S VIDEO OUT

4-pin mini DIN/Y: 1.0 Vp-p, C: 0.286 Vp-p/75 ohms (NS41P/NS50P:US,CND,PX,MX)

General

Power requirements:

110 V AC, 60 Hz (NS50P:TW/NS52P:TW) 110 – 240 V AC, 50/60 Hz (Except NS41P/NS50P: US,CND,MX,TW/NS52P:TW) 120 V AC, 60 Hz (NS41P/NS50P:US,CND,MX)

Saudi Arabia Model

DVP-NS50P

Power consumption: 10 W Dimensions (approx.):

430 × 43 × 237.2 mm (17 × 11 11/16 × 9 3/8 in.) (width/height/depth) incl. projecting parts 430 × 43 × 237.3 (DVP-NS52P)

Mass (approx.): 1.92 kg (4 1/3 lb) Operating temperature: 5°C to 35°C Operating humidity: 25% to 80%

Supplied accessories

See page 14 (Except NS41P/

NS50P:US,CND,PX)

See page 16 (NS41P/NS50P:US,CND,PX)

Specifications and design are subject to change without notice.

ENERGY STA R

As an ENERGY STA R Partner, Sony Corporation has determined that this product meets the ENERGY STA R guidelines for energy efficiency.

(DVP-NS41P/NS50P:US,CND,AUS/ NS52P:AUS)



is a U.S. registered mark.



CD/DVD PLAYER

DVP-NS50P/NS41P/NS52P

After correcting the original service problem, perform the following safety checks before releasing the set to the customer:

SAFETY CHECK-OUT

1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.

2. Check the interboard wiring to ensure that no wires are “pinched” or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.

4. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

5. Check the line cord for cracks and abrasion. Recommend the replacement of any such line cord to the customer.

6. Check the B+ voltage to see it is at the values specified.

7. Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below.

To Exposed Metal

Parts on Set

0.15 F

Fig.A. Using an Acvoltmeter to check AC leakage.

WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.

1.5k

Earth Ground

WARNING!!

Voltmeter (0.75 V)

CAUTION:

The use of optical instrument with this product will increase eye hazard.

LEAKAGE TEST

The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5mA (500 microampers). Leakage current can be measured by any one of three methods.

1. A commercial leakage tester, such as the Simpson 229 or RCA TW-540A. Follow the manufacturers’ instructions to use these instruments.

2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC volmeter. The “limit” indication is 0.75V, so analog meters must have an accurate low voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. (See Fig. A)

Unleaded solder

Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)

: LEAD FREE MARK

Unleaded solder has the following characteristics.

• Unleaded solder melts at a temperature about 40°C highter than

ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350°C Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful!

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK OR DOTTED LINE WITH MARK ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

– 2 –

TABLE OF CONTENTS

DVP-NS50P/NS41P/NS52P

SERVICE NOTE

1. Disc Removal Procedure (at POWER OFF) .............. 4

1. GENERAL

Precautions.................................................................... 1-1

This Player Can Play the Following Discs................... 1-1

Index to Parts and Controls ......................................... 1-1

Guide to the Control Menu Display .............................. 1-2

Hookups ................................................................................ 1-3

Hooking Up the Player .................................................. 1-3

Step 1: Unpacking ......................................................... 1-3

Step 2: Inserting Batteries into the Remote ................. 1-3

Step 3: Connecting the Video Cords ............................ 1-3

Step 4: Connecting the Audio Cords ............................ 1-4

Step 5: Connecting the Power Cord ............................. 1-4

Step 6: Quick Setup ...................................................... 1-4

Playing Discs ......................................................................... 1-5

Playing Discs ................................................................. 1-5

Resuming Playback from the Point Where You

Stopped the Disc (Multi-disc Resume) .................. 1-5

Using the DVD's Menu.................................................. 1-6

Selecting “ORIGINAL” or “PLAY LIST” on a

DVD-RW ................................................................... 1-6

Playing VIDEO CD's With PBC Functions

(PBC Playback) ........................................................ 1-6

Various Play Mode Functions (Programme Play,

Shuffle Play, Repeat Play, A-B Repeat Play ........... 1-6

Searching for a Scene .......................................................... 1-7

Searching for a Particular Point on a Disc (Search,

Scan, Slow-motion Play, Freeze Frame) ............... 1-7

Searching for a Title/Chapter/Track/Scene, etc. ......... 1-8

Searching by Scene (PICTURE NAVIGATION) ......... 1-8

Viewing Information About the Disc ..................................... 1-8

Checking the Playing Time and Remaining Time ........ 1-8

Sound Adjustments ............................................................... 1-9

Changing the Sound ...................................................... 1-9

TV Virtual Surround Settings (TVS) ............................. 1-9

Enjoying Movies .................................................................... 1-10

Changing the Angles ..................................................... 1-10

Displaying the Subtitles................................................. 1-10

Adjusting the Playback Picture

(CUSTOM PICTURE MODE) ................................. 1-10

Sharpening the Pictures (SHARPNESS)..................... 1-11

Enjoying MP3 Audio and JPEG Images .............................. 1-11

About MP3 Audio Tracks and JPEG Image Files ....... 1-11

Playing MP3 Audio Tracks and JPEG Image Files ..... 1-11

Enjoying JPEG Images as a Slide Show ..................... 1-12

Using Various Additional Functions ...................................... 1-12

Locking Discs (CUSTOM PARENTAL CONTROL,

PARENTAL CONTROL) .......................................... 1-12

Controlling Your TV with the Supplied Remote ............. 1-13

Settings and Adjustments..................................................... 1-13

Using the Setup Display ............................................... 1-13

Setting the Display or Sound Track Language

(LANGUAGE SETUP) ............................................. 1-14

Settings for the Display (SCREEN SETUP) ................ 1-14

Custom Settings (CUSTOM SETUP) .......................... 1-14

Settings for the Sound (AUDIO SETUP) ..................... 1-14

Additional Information ............................................................ 1-15

Troubleshooting ............................................................. 1-15

Self-diagnosis Function (When letters/

numbers appear in the display ................................ 1-16

Glossary ........................................................................ 1-16

Specifications................................................................. 1-16

2. DISASSEMBLY

2-1. Upper Case ................................................................... 2-1

2-2. Front Panel Assembly ................................................... 2-1

2-3. Loading Assembly ......................................................... 2-2

2-4. Optical Pick-Up

(Device, Optical KHM-310CAA/C2RP) .................. 2-3

2-5. MV-045 and IF124 Boards ............................................ 2-4

2-6. Switching Regulator ...................................................... 2-4

2-7. Interval Views ................................................................. 2-5

2-8. Circuit Boards Location................................................. 2-6

3. BLOCK DIAGRAMS

3-1. Overall Block Diagram .................................................. 3-1

3-2. Power Line Block Diagram ........................................... 3-3

3-3. System Control/Signal Processor Block Diagram ...... 3-5

3-4. RF/Servo Block Diagram .............................................. 3-7

3-5. Audio Block Diagram ..................................................... 3-9

3-6. Video Block Diagram ..................................................... 3-11

3-7. Interface Control Block Diagram .................................. 3-13

4. PRINTED WIRING BOARDS AND

SCHEMATIC DIAGRAMS

4-1. Frame Schematic Diagram ........................................... 4-1

4-2. Printed Wiring Boards and Schematic Diagrams ........ 4-3

Waveform ...................................................................... 4-4

• MV-045 Printed Wiring Board .................................. 4-5

• MV-045 (CPU, Servo-DSP, AVDEC)

Schematic Diagram ............................................ 4-7

• MV-045 (Drive) Schematic Diagram ....................... 4-9

• MV-045 (Video) Schematic Diagram ....................... 4-11

• MV-045 (Audio) Schematic Diagram ....................... 4-13

• MV-045 (Power) Schematic Diagram...................... 4-15

• IF-124 Printed Wiring Board .................................... 4-17

• IF-124 (Interface) Schematic Diagram .................. 4-19

• Power Block (SRV1487UC) Printed Wiring Board . 4-21

• Power Block (SRV1487UC) Schematic Diagram ... 4-23

• Power Block (SRV1501WW) Printed Wiring Board 4-25

• Power Block (SRV1501WW) Schematic Diagram . 4-27

5. IC PIN FUNCTION DESCRIPTION

5-1. System Control-Video Pin Function

(MV-045 BOARD IC101) .............................................. 5-1

6. TEST MODE

6-1. Executing IOP Measurement ....................................... 6-1

6-2. Emergency History Check ........................................... 6-1

6-3. Initializing Setup Data .................................................... 6-2

6-4. Version Information ....................................................... 6-3

6-5. If Con Self Diagnostic Function .................................... 6-3

7. ELECTRICAL ADJUSTMENT

7-1. Power Supply Output Voltage Check ........................... 7-1

7-2. Adjustment of Video System ......................................... 7-2

8. REPAIR PARTS LIST

8-1. Exploded Views ............................................................. 8-1

8-1-1. Main Section ............................................................. 8-1

8-1-2. Mechanism Deck Assembly .................................... 8-3

8-2. Electrical Parts List ....................................................... 8-4

– 3 –

DVP-NS50P/NS41P/NS52P

SERVICE NOTE

1. DISC REMOVAL PROCEDURE (at POWER OFF)

1) Open dust cover to access to a hole insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck can in the direction of the arrow A. (See Fig. 1)

2) Draw out the tray in the direction of the arrow B, and remove a disc. (See Fig. 1)

The lever of a zipper cam

Tray

Hold

Fig. 1.

– 4 –

– 4E –

DVP-NS50P/NS41P/NS52P

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

The AC power cord must be changed only at a qualified service shop.

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

This symbol is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is

intended to alert the

user to the presence

of important

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the

receiving antenna.

– Increase the separation

between the equipment and receiver.

– Connect the equipment into an

outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an

experienced radio/TV technician for help.

SECTION 1

Notes About the Discs

• To keep the disc clean, handle the disc by its edge. Do not touch the surface.

• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.

• After playing, store the disc in its case.

• Clean the disc with a cleaning cloth. Wipe the disc from the center out.

• Do not use solvents such as benzine, thinner, commercially available disc/lens cleaners, or anti-static spray intended for vinyl LPs.

• If you have printed the disc’s label, dry the label before playing.

GENERAL

This section is extracted from instruction manual. 2-581-693-13

Important Safeguards

For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them.

Use

Power sources

This set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, or other sources, refer to the operating instructions.

Grounding or Polarization

This set is equipped with a polarized ac power cord plug (a plug having one blade wider than the other), or with a three-wire grounding type plug (a plug having a third pin for grounding). Follow the instructions below:

For the set with a polarized AC power cord plug:

This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.

For the set with a three-wire grounding type AC plug:

This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the grounding plug.

Overloading

Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.

Object and Liquid Entry

Never push objects of any kind into the set through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set.

Attachments

Do not use attachments not recommended by the manufacturer, as they may cause hazards.

Cleaning

Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set.

Installation

Water and Moisture

Do not use power-line operated sets near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

Power-Cord Protection

Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance.

Accessories

Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart stand tripod, bracket, or table recommended by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Ventilation

The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered.

• Never cover the slots and openings with a cloth or other materials.

• Never block the slots and openings by placing the set on a bed, sofa, rug or other similar surface.

S3125A

,continued

• Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

• Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight.

Antennas

Outdoor antenna grounding

If an outdoor antenna or cable system is installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Antenna Grounding According to the National Electrical Code

Ground Clamp

Electric Service Equipment

NEC-NATIONAL ELECTRICAL CODE

Lightning

For added protection for this set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and powerline surges.

Antenna Lead in Wire

Antenna Discharge unit (NEC Section 810-20)

Grounding Conductors (NEC Section 810-21)

Ground Clamps Power Service Grounding Electrode System (NEC Art 250 Part H)

Service

Damage Requiring Service

Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions:

• When the power cord or plug is damaged or frayed.

• If liquid has been spilled or objects have fallen into the set.

• If the set has been exposed to rain or water.

• If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged.

• If the set does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation.

• When the set exhibits a distinct change in performance - this indicates a need for service.

Servicing

Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Replacement parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.

Safety Check

Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition.

Precautions

The power requirements and power consumption of this player are indicated on the back of the player. Check that the player’s operating voltage is identical with your local power supply.

Power requirements and power consumption

On safety

• To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

• Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further.

On power sources

• The player is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the player itself has been turned off.

• If you are not going to use the player for a long time, be sure to disconnect the player from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord.

On placement

• Place the player in a location with adequate ventilation to prevent heat build-up in the player.

• Do not place the player on a soft surface such as a rug.

• Do not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.

• Do not install the player in an inclined position. It is designed to be operated in a horizontal position only.

• Keep the player and the discs away from equipment with strong magnets, such as microwave ovens, or large loudspeakers.

• Do not place heavy objects on the player.

DVP–XXXX

00V 00Hz

NO.

00W

0-000-000-00

On operation

• If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates.

• When you move the player, take out any

discs. If you don’t, the disc may be damaged.

For the model supplied with the AC plug adaptor

If the AC plug of your unit does not fit into the wall outlet, attach the supplied AC plug adaptor.

On adjusting volume

Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

On cleaning discs, disc/lens cleaners

Do not use a commercially available cleaning disc or disc/lens cleaner (wet or spray type). These may cause the apparatus to malfunction.

IMPORTANT NOTICE

Caution: This player is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Plasma display panel televisions and projection televisions are susceptible to this.

If you have any questions or problems concerning your player, please consult your nearest Sony dealer.

1-1

DVP-NS50P/NS41P/NS52P

Enjoying MP3 Audio and JPEG Images . . . . . . . . . . . . . . . . . . . . . 48

About MP3 Audio Tracks and JPEG Image Files . . . . . . . . . . . . . . . . . . . . . 48

Playing MP3 Audio Tracks or JPEG Image Files. . . . . . . . . . . . . . . . . . . . . . 49

Enjoying JPEG Images as a Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Using Various Additional Functions . . . . . . . . . . . . . . . . . . . . . . . 54

Locking Discs (CUSTOM PARENTAL CONTROL,

PARENTAL CONTROL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Controlling Your TV with the Supplied Remote . . . . . . . . . . . . . . . . . . . . . . . 57

Settings and Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Using the Setup Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Setting the Display or Sound Track Language (LANGUAGE SETUP) . . . . . 59

Settings for the Display (SCREEN SETUP). . . . . . . . . . . . . . . . . . . . . . . . . . 60

Custom Settings (CUSTOM SETUP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Settings for the Sound (AUDIO SETUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Self-diagnosis Function (When letters/numbers appear in the display). . . . . 67

Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

About This Manual

• Instructions in this manual describe the controls on the remote. You can also use the controls on the player if they have the same or similar names as those on the remote.

• “DVD” may be used as a general term for DVD VIDEOs, DVD+RWs/DVD+Rs and DVD-RWs/DVD-Rs.

• The meaning of the icons used in this manual is described below:

Icons Meanings

Functions available for DVD VIDEOs and DVD+RWs/DVD+Rs in +VR mode or DVD-RWs/DVD-Rs in video mode

Functions available for DVD-RWs in VR (Video Recording) mode

Functions available for VIDEO CDs (including Super VCDs or CD-Rs/ CD-RWs in video CD format or Super VCD format)

Functions available for music CDs or CD-Rs/CD-RWs in music CD format

Functions available for DATA CDs (CD-ROMs/CD-Rs/CD-RWs) containing MP3* audio tracks, and JPEG image files

Functions available for DATA DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/

* MP3 (MPEG-1 Audio Layer III) is a standard format defined by ISO (International Organization for

DVD-RWs/DVD-Rs) containing MP3* audio tracks, and JPEG image files.

Standardization)/IEC (International Electrotechnical Commission) MPEG which compresses audio data.

This Player Can Play the Following Discs

Format of discs

DVD VIDEO

DVD-RW/-R

DVD+RW/+R

VIDEO CD/ Music CD

CD-RW/-R

“DVD+RW,” “DVD-RW,” “DVD+R,” “DVD-R,” “DVD VIDEO,” and “CD” logos are trademarks.

Note about CDs/DVDs

The player can play CD-ROMs/CD-Rs/CDRWs recorded in the following formats: – music CD format – video CD format – MP3 audio tracks and JPEG image files of

format conforming to ISO 9660* Level 1/ Level 2, or its extended format, Joliet

– KODAK Picture CD format

* A logical format of files and folders on CD-

ROMs, defined by ISO (International Organization for Standardization).

The player can play DVD-ROMs/ DVD+RWs/DVD-RWs/DVD+Rs/DVD-Rs recorded in the following format: – MP3 audio tracks and JPEG image files of

format conforming to UDF (Universal Disk Format).

Example of discs that the player cannot play

The player cannot play the following discs:

• CD-ROMs/CD-Rs/CD-RWs other than those recorded in the formats listed on this page.

• CD-ROMs recorded in PHOTO CD format.

• Data part of CD-Extras.

• DVD Audio discs.

• HD layer on Super Audio CDs.

Also, the player cannot play the following discs:

• A DVD VIDEO with a different region code.

• A disc recorded in a color system other than NTSC, such as PAL or SECAM (this player conforms to the NTSC color system).

• A disc that has a non-standard shape (e.g., card, heart).

• A disc with paper or stickers on it.

• A disc that has the adhesive of cellophane tape or a sticker still left on it.

Region code

Your player has a region code printed on the back of the unit and only will play DVD VIDEOs (playback only) labeled with identical region codes. This system is used to protect copyrights.

DVP–XXXX

0-000-000-00

ALL

Region code

DVD VIDEOs labeled will also play on this player.

If you try to play any other DVD VIDEO, the message “Playback prohibited by area limitations.” will appear on the TV screen. Depending on the DVD VIDEO, there may be no region code indication, even though playing the DVD VIDEO is prohibited by area restrictions.

00V 00Hz

NO.

00W

Notes

• Notes about DVD+RWs/DVD+Rs, DVD-RWs/ DVD-Rs or CD-Rs/CD-RWs

Some DVD+RWs/DVD+Rs, DVD-RWs/DVDRs, or CD-Rs/CD-RWs cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions for the recording device. Note that some playback functions may not work with some DVD+RWs/DVD+Rs, even if they have been correctly finalized. In this case, view the disc by normal playback. Also some DATA CDs/DATA DVDs created in Packet Write format cannot be played.

• Music discs encoded with copyright protection

technologies

This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

• Note on DualDiscs

A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.

Note on playback operations of DVDs and VIDEO CDs

Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers. Since this player plays DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VIDEO CDs.

Copyrights

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Index to Parts and Controls

For more information, see the pages indicated in parentheses.

Front panel

A [/1 (on/standby) button (24) B Disc tray (24) C Front panel display (11) D A (open/close) button (24) E H (play) button (24) F X (pause) button (25)

Rear panel

AUDIO

COMPONENT VIDEO OUT

LINE OUT

VIDEO

S VIDEO OUT

DIGITAL OUT

COAXIAL

A DIGITAL OUT (COAXIAL) jack (20) B LINE OUT L/R (AUDIO) jacks (20) C LINE OUT (VIDEO) jack (17)

G x (stop) button (25) H ./> (previous/next) buttons (34) I PROGRESSIVE button/indicator (19)

Lights up when the player outputs progressive signals.

J (remote sensor) (16)

D S VIDEO OUT jack (17) E COMPONENT VIDEO OUT jacks

(17)

1-2

DVP-NS50P/NS41P/NS52P

Front panel display

When playing back a DVD VIDEO/DVD-RW

Playing status

Disc type

Lights up during Repeat Play (32)

When playing back a VIDEO CD with Playback Control (PBC) (28)

Disc type

Lights up during A-B Repeat Play (33)

When playing back a CD, DATA CD/DATA DVD (MP3 audio), or VIDEO CD (without PBC)

Playing status

Disc type*

* When playing DATA DVDs, the DVD indicator is displayed.

Lights up when you can change the angle (44)

Current audio signal (42)

Playing status

Lights up during Repeat Play (32)

Lights up when playing MP3 audio tracks (48)

Current title/chapter or playing time (38)

Current scene or playing time (38)

Current track (38)

Playing time (38)

,continued

Remote

I ./> PREV/NEXT (previous/

next) buttons (25)

J m/M SCAN/SLOW

buttons (35)

K ZOOM button (25, 51) L SLOW PLAY/FAST PLAY buttons

(25)

M AUDIO button (41) N SUBTITLE button (44) O [/1 (on/standby) button (24) P VOL (volume) +/– buttons (57)

The + button has a tactile dot.*

Q TV/VIDEO button (57) R PICTURE NAVI (picture navigation)

button (37, 51)

S TIME/TEXT button (38) T MENU button (27) U ENTER button (22) V DISPLAY button (13) W H PLAY button (24)

The H button has a tactile dot.*

X x STOP button (25) Y X PAUSE button (25) Z SUR (surround) button (42)

wj ANGLE button (44)

* Use the tactile dot as a reference when operating

A TV [/1 (on/standby) button (57) B Z OPEN/CLOSE button (25) C Number buttons (27)

The number 5 button has a tactile dot.*

D CLEAR button (29) E TOP MENU button (27) F C/X/x/c buttons (27) G O RETURN button (25) H / REPLAY/STEP/

ADVANCE/STEP buttons (25, 35)

the player.

Guide to the Control Menu Display

Use the Control Menu to select a function and to view related information. Press DISPLAY repeatedly to turn on or change the Control Menu display as follows:

Control Menu display 1

Control Menu display 2 (DATA CDs/DATA DVDs only)

Control Menu display off

Control Menu display

The Control Menu display 1 and 2 will show different items depending on the disc type. For details about each item, see the pages in parentheses.

Example: Control Menu display 1 when playing a DVD VIDEO.

Playback status (N Playback,

X Pause, x Stop, etc.)

Type of disc being played*

Playing time* Current setting

Options

,continued

Control Menu items

1 2 (2 7 1 8 (3 4 T

Selected item

Function name of selected Control Menu item

Operation message

*1Displays the scene number for VIDEO CDs

(PBC is on), track number for VIDEO CDs/ CDs, album number for DATA CDs/DATA DVDs.

Displays the index number for VIDEO CDs,

MP3 audio track number or JPEG image file number for DATA CDs/DATA DVDs.

Displays Super VCD as “SVCD.”

Displays the date for JPEG files.

To turn off the display

Press DISPLAY.

OFF OFF SET ON

PROGRAM

1 : 3 2 : 5 5

Currently playing chapter number*

Currently playing title number*

Total number of titles*

Total number of chapters*

) )

ENTER DISPLAY

Quit:

PLAY DVD VIDEO

List of Control Menu items

Item Item Name, Function

TITLE (page 35)/SCENE (page 35)/TRACK (page 35)

Selects the title, scene, or track to be played.

CHAPTER (page 35)/INDEX (page 35)

Selects the chapter or index to be played.

TRACK (page 35)

Selects the track to be played.

ORIGINAL/PLAY LIST (page 27)

Selects the type of titles (DVD-RW) to be played, the ORIGINAL one, or an edited PLAY LIST.

TIME/TEXT (page 35)

Checks the elapsed time and the remaining playback time. Input the time code for picture and music searching. Displays the DVD/CD text, or the DATA CD/DATA DVD track/file name.

PROGRAM (page 29)

Selects the title, chapter, or track to play in the order you want.

SHUFFLE (page 31)

Plays the title, chapter, or track in random order.

REPEAT (page 32)

Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/track/ album repeatedly.

A-B REPEAT (page 33)

Specifies the parts you want to play repeatedly.

CUSTOM PICTURE MODE (page 45)

Adjusts the video signal from the player. You can select the picture quality that best suits the program you are watching.

SHARPNESS (page 47)

Exaggerates the outline of the image to produce a sharper picture.

PARENTAL CONTROL (page 54)

Set to prohibit playback on this player.

SETUP (page 58)

QUICK Setup (page 22) Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of the TV and the audio output signal. CUSTOM Setup In addition to the Quick Setup setting, you can adjust various other settings. RESET Returns the settings in “SETUP” to the default setting.

ALBUM (page 48)

Selects the album to be played.

FILE (page 35)

Selects the JPEG image file to be played.

DATE (page 51)

Displays the date the picture was taken by a digital camera.

INTERVAL (page 53)

Specifies the duration for which the slides are displayed on the screen.

EFFECT (page 53)

Selects the effects to be used for changing slides during a slide show.

1-3

DVP-NS50P/NS41P/NS52P

MODE (MP3, JPEG) (page 52)

Selects the data type; MP3 audio track (AUDIO), JPEG image file (IMAGE) or both (AUTO) to be played when playing a DATA CD or DATA DVD.

z Hint

The Control Menu icon indicator lights up in green

except “OFF” (“PROGRAM,” “SHUFFLE,” “REPEAT,” “A-B REPEAT,” “CUSTOM PICTURE MODE,” “SHARPNESS” only). The “ORIGINAL/PLAY LIST” indicator lights up in green when you select “PLAY LIST” (default setting).

when you select any item

Hookups

Hooking Up the Player

Follow steps 1 to 6 to hook up and adjust the settings of the player.

Notes

• Plug cords securely to prevent unwanted noise.

• Refer to the instructions supplied with the components to be connected.

• You cannot connect this player to a TV that does not have a video input jack.

• Be sure to disconnect the power cord of each component before connecting.

Step 1: Unpacking

Check that you have the following items:

• Audio/Video cord (phono plug × 3 y phono plug × 3) (1)

• Remote commander (remote) (1)

• Size AA (R6) batteries (2) A plug adaptor is included with some models

Step 2: Inserting Batteries Into the Remote

You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the player.

Step 3: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. Select one of the patterns A through C, according to the input jack on your TV monitor, projector, or AV amplifier (receiver). In order to view progressive signal (480p) pictures with a compatible TV, projector, or monitor, you must use pattern C.

Audio/video

(yellow)

INPUT

VIDEO

AUDIO

TV, projector or AV amplifier (receiver)

to LINE OUT (VIDEO)

(green)

Component video cord (not supplied)

l : Signal flow

If you are connecting to a video input jack

Connect the yellow plug of an audio/video cord (supplied) to the yellow (video) jack. You will enjoy standard quality images. With this connection, select “NORMAL (INTERLACE)” (default) by pressing the PROGRESSIVE button on the front panel.

DIGITAL OUT

Yellow

White (L)

Red (R)

COAXIAL

(blue)

COMPONENT VIDEO OUT

cord (supplied)

AUDIO

S VIDEO OUT

(red)

(yellow)

LINE OUT

VIDEO

to COMPONENT VIDEO OUT

S VIDEO cord (not supplied)

to S VIDEO OUT

INPUT

S VIDEO

TV, projector or AV amplifier (receiver)

CD/DVD player

COMPONENT

VIDEO IN

TV, projector or AV amplifier (receiver)

Yellow White (L) Red (R)

(green)

(blue)

(red)

,continued

Hookups

Notes

• Do not leave the remote in an extremely hot or humid place.

• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a malfunction.

• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

If you are connecting to an S VIDEO input jack

Connect an S VIDEO cord (not supplied). You will enjoy high quality images. With this connection, select “NORMAL (INTERLACE)” (default) by pressing the PROGRESSIVE button on the front panel.

If you are connecting to a monitor, projector, or AV amplifier

(receiver) having component video input jacks (Y, P

Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high quality images. If your TV accepts progressive 480p format signals, use this connection and press the PROGRESSIVE button on the front panel to output progressive signals. For details, see “Using the PROGRESSIVE button” (page 19).

Green Blue Red

When connecting to a wide screen TV

Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see page 60.

Notes

• Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the player to this jack.

VCR

CD/DVD player

• Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 480 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 480p DVD player model, please contact our customer service center.

Connect directly

Green Blue Red

, PR)

1-4

DVP-NS50P/NS41P/NS52P

Using the PROGRESSIVE button

By using the PROGRESSIVE button on the front panel, you can select the signal format in which the player outputs video signals (Progressive or Interlace), and the conversion method for progressive signals. The PROGRESSIVE indicator lights up when the player outputs progressive signals. Each time you press PROGRESSIVE, the display changes as follows:

PROGRESSIVE AUTO

PROGRESSIVE VIDEO

NORMAL (INTERLACE)

◆PROGRESSIVE AUTO

Select this setting when: – your TV accepts progressive signals, and, – the TV is connected to the COMPONENT VIDEO OUT jacks. Normally select this under the above condition. This automatically detects the software type, and selects the appropriate conversion method. Note that the picture will not be clear or no picture will appear if you select these settings when either of the above conditions is not met.

◆PROGRESSIVE VIDEO

Select this setting when: – your TV accepts progressive signals, and, – the TV is connected to the COMPONENT VIDEO OUT jacks, and, – you want to fix the conversion method to PROGRESSIVE VIDEO for video-based software. Select this if the image is not clear when you select PROGRESSIVE AUTO. Note that the picture will not be clear or no picture will appear if you select these settings when either of the above conditions is not met.

◆NORMAL (INTERLACE)

Select this setting when: – your TV does not accept progressive signals, or, – your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (LINE OUT

(VIDEO) or S VIDEO OUT).

About DVD software types and the conversion method

DVD software can be divided into two types: film-based software and video based software. Video-based software is derived from TV, such as dramas and sit-coms, and displays images at 30 frames/60 fields per second. Film-based software is derived from film and displays images at 24 frames per second. Some DVD software contains both video and film. In order for these images to appear natural on your screen when output in progressive format, the progressive signals need to be converted to match the type of DVD software that you are watching.

Notes

• When you play video-based software in progressive signal format, sections of some types of images may appear unnatural due to the conversion process when output through the COMPONENT VIDEO OUT jacks. Images from the S VIDEO OUT and LINE OUT (VIDEO) jacks are unaffected as they are output in the normal (interlace) format.

• When using LINE OUT (VIDEO) or S VIDEO OUT, the picture may appear to flicker each time the PROGRESSIVE button on the front panel is pressed (Interlace switches to Progressive or vice versa).

Hookups

Step 4: Connecting the Audio Cords

Select one of the following patterns A or B, according to the input jack on your TV monitor, projector, or AV amplifier (receiver). This will enable you to listen to sound.

(red)

Audio/video cord (supplied)

(white)

(yellow)*

LINE OUT

VIDEO

AUDIO

to LINE OUT L/R (AUDIO)

LINE OUT

DIGITAL OUT

VIDEO

COAXIAL

AUDIO

S VIDEO OUT

COMPONENT VIDEO OUT

to DIGITAL OUT (COAXIAL)

DIGITAL OUT

COAXIAL

[Speakers]

Rear (L)

Front (L)

Center

: Signal flow

* The yellow plug is used for video signals (page 17).

z Hint

For correct speaker location, see the operating instructions supplied with the connected components.

AV amplifier (receiver) with a decoder

(yellow)*

(white)

(red)

CD/DVD player

Coaxial digital cord (not supplied)

to coaxial digital input

INPUT

VIDEO

AUDIO

TV, projector, or AV amplifier (receiver)

[Speakers]

Rear (R)

Front (R)

Subwoofer

Connecting to audio L/R input

jacks

This connection will use your TV’s or stereo amplifier’s (receiver’s) two speakers for sound. Connect using the audio/video cord (supplied).

Yellow

White (L)

Red (R)

• Surround effect (page 43)

TV: Dynamic Theater, Dynamic, Wide, Night

Stereo amplifier (receiver): Standard, Night

Yellow White (L) Red (R)

Connecting to a digital audio

input jack

If your AV amplifier (receiver) has a Dolby* Digital or DTS* jack, use this connection. Connect using a coaxial digital cord (not supplied).

Coaxial cord

• Surround effect Dolby Digital (5.1ch), DTS (5.1ch)

Notes

• After you have completed the connection, make the appropriate settings in Quick Setup (page 22). Otherwise, no sound or a loud noise will come from your speakers.

• The surround sound effects of this player cannot be used with this connection.

• In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output through the LINE OUT L/R (AUDIO) jacks, even if you set “DTS” to “ON” in Quick Setup (page 22).

decoder and a digital input

Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Hookups

Step 5: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet.

Step 6: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player. To skip an adjustment, press >. To return to the previous adjustment, press ..

ENTE

Turn on the TV.

Press [/1.

Switch the input selector on your TV so that the signal from the player appears on the TV screen.

“Press [ENTER] to run QUICK SETUP” (press enter to run Quick Setup) appears at the bottom of the screen. If this message does not appear, select “QUICK” (quick) under “SETUP” (setup) in the Control Menu to run Quick Setup (page 59).

Press ENTER without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP

OSD: MENU: AUDIO: SUBTITLE:

Press X/x to select a language.

The player displays the menu and subtitles in the selected language.

Press ENTER.

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

SCREEN SETUP

TV TYPE: SCREEN SAVER: BACKGROUND: BLACK LEVEL: BLACK LEVEL 4:3 OUTPUT: FULL

4:3 LETTER BOX 4:3 LETTER BOX

(COMPONENT OUT)

PORTUGUESE

4:3 PAN SCAN

ENGLISH ENGLISH

FRENCH

SPANISH

16:9 OFF

1-5

DVP-NS50P/NS41P/NS52P

Press X/x to select the setting that matches your TV type.

◆ If you have a 4:3 standard TV

• 4:3 LETTER BOX or 4:3 PAN SCAN (page 60)

◆ If you have a wide-screen TV or a 4:3

standard TV with a wide-screen mode

• 16:9 (page 60)

Press ENTER.

The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears.

Is this player connected to an amplifier (receiver) ? Select the type of jack you are using.

YES

LINE OUTPUT L/R (AUDIO) DIGITAL OUTPUT

Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press ENTER.

If you did not connect an AV amplifier (receiver), select “NO,” then go to step

13.

If you connected an AV amplifier (receiver) using just an audio cord, select “YES: LINE OUTPUT L/R (AUDIO),” then go to step 13. If you connected an AV amplifier (receiver) using a digital coaxial cord, select “YES: DIGITAL OUTPUT.”

Press X/x to select the type of

Dolby Digital signal you wish to send to your amplifier (receiver).

If your AV amplifier (receiver) has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select “D-PCM.”

“DTS” is selected.

not you wish to send a DTS signal to your amplifier (receiver).

If your AV amplifier (receiver) has a DTS decoder, select “ON.” Otherwise, select “OFF.”

Quick Setup is finished. All connections and setup operations are complete.

AUDIO SETUP

AUDIO ATT: AUDIO DRC: DOWNMIX: DIGITAL OUT:

DOLBY DIGITAL: DTS: 48kHz/96kHz PCM:

OFF

STANDARD

DOLBY SURROUND

ON D-PCM D-PCM

DOLBY DIGITAL

Press ENTER.

AUDIO SETUP

AUDIO ATT: AUDIO DRC: DOWNMIX: DIGITAL OUT:

DOLBY DIGITAL: DTS: 48kHz/96kHz PCM:

OFF

STANDARD

DOLBY SURROUND

ON D-PCM

OFF OFF

Press X/x to select whether or

Press ENTER.

Hookups

Playing Discs

Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc.

RETURN

Turn on your TV.

Press [/1.

The player turns on.

Switch the input selector on your TV so that the signal from the player appears on the TV screen.

◆ When using an amplifier (receiver)

Turn on the amplifier (receiver) and select the appropriate channel so that you can hear sound from the player.

ENTER

Press A on the player, and place a disc on the disc tray.

Playback side facing down

Press H.

The disc tray closes. The player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver). Depending on the disc, a menu may appear on the TV screen. For DVD VIDEOs, see page 27. For VIDEO CDs, see page 28.

To turn off the player

Press [/1. The player enters standby mode.

z Hint

You can have the player turn off automatically whenever you leave it in stop mode for more than 30 minutes. To turn this function on or off, set “AUTO POWER OFF” in “CUSTOM SETUP” to “ON” or “OFF” (page 61).

Notes on playing DTS sound tracks on a DVD VIDEO

• DTS audio signals are output only through the DIGITAL OUT (COAXIAL) jack.

• When you play a DVD VIDEO with DTS sound tracks, set “DTS” to “ON” in “AUDIO SETUP” (page 63).

• If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to “ON” in “AUDIO SETUP” (page 63). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged.

Note

Discs created on DVD recorders must be correctly finalized before they can be played. For more information about finalizing, refer to the operating instructions supplied with the DVD recorder.

Additional operations

CLEAR

REPLAY

ZOOM

SLOW PLAY

To Operation

Stop Press x Pause Press X

Resume play after pause

Go to the next chapter, track, or scene in continuous play mode

Go back to the previous chapter, track, or scene in continuous play mode

Stop play and remove the disc

Replay the previous

scene*

Briefly fast forward the current scene*

Magnify the image*

*1DVD VIDEOs/DVD-RWs/DVD-Rs only

Note

You may not be able to use the Replay or Advance function with some scenes.

DVD VIDEOs/DVD-RWs/DVD-Rs/ DVD+RWs/DVD+Rs only Video and JPEG pictures only (except BACKGROUND pictures). You can move the enlarged picture using C/X/x/c. Depending upon the contents of the disc, the zoom function may be canceled automatically when the picture is moved.

Press X or H

Press >

Press .

Press Z

Press REPLAY during playback

Press ADVANCE during playback

Press ZOOM repeatedly. Press CLEAR to cancel.

ADVANCE

FAST PLAY

Playback quickly or slowly with sound

You can listen to dialog or sound while playing the current scene quickly or slowly.

During playback, press FAST PLAY or SLOW PLAY.

The speed changes when you press either FAST PLAY or SLOW PLAY.

To return to normal playback

Press H.

Notes

• You can only use this function with DVDs/ VIDEO CDs/Super VCDs and DVD-RWs in VR mode only.

• “Operation not possible” will appear when maximum or minimum speed is reached.

• During Fast Play or Slow Play mode, you cannot change the angle (page 44), subtitle (page 44) and sound (page 41). The sound can only be changed for VIDEO CDs/Super VCDs.

• Fast Play and Slow Play functions do not work when playing DTS sound tracks.

• You cannot use Fast Play or Slow Play functions when playing a still picture on DVD-RW in VR mode.

Locking the disc tray (Child Lock)

You can lock the disc tray to prevent children from opening it.

When the player is in standby mode, press O RETURN, ENTER, and then [/1 on the remote.

The player turns on and “LOCKED” appears on the front panel display. The buttons on the player or the remote do not work while the Child Lock is set.

To unlock the disc tray

When the player is in standby mode, press O RETURN, ENTER, and then [/1 again.

Note

Even if you select “RESET” under “SETUP” in the Control Menu (page 59), the disc tray remains locked.

and Z

Playing Discs

Resuming Playback From the Point Where You Stopped the Disc

Resume)

The player stores the point where you stopped the disc for up to 6 discs and resumes playback the next time you insert the same disc. If you store a resume playback point for the seventh disc, the resume playback point for the first disc is deleted.

While playing a disc, press x to stop playback.

“RESUME” appears on the front panel display.

Press H.

The player starts playback from the point where you stopped the disc in step 1.

z Hint

To play from the beginning of the disc, press x twice, then press H.

(Multi-disc

Notes

• “MULTI-DISC RESUME” in “CUSTOM SETUP” must be set to “ON” (default) for this function to work (page 62).

• The point where you stopped playing is cleared when:

– you change the play mode. – you change the settings on the Setup Display.

• For DVD-RWs in VR mode, CDs, DATA CDs, and DATA DVDs the player remembers the resume playback point for the current disc. The resume point is cleared when:

– you opened the disc tray. – you disconnect the power cord (CD or DATA

CD/DATA DVD only).

– the player enters standby mode (DATA CD/

DATA DVD only).

• Resume Play does not work during Shuffle Play and Program Play.

• This function may not work with some discs.

• If “MULTI-DISC RESUME” in “CUSTOM SETUP” is set to “ON” and you playback a recorded disc such as DVD-RW, the player may playback other recorded discs from the same resume point. To play from the beginning, press x twice and then press H.

1-6

Using the DVD’s Menu

A DVD is divided into long sections of a picture or a music feature called “titles.” When you play a DVD which contains several titles, you can select the title you want using the TOP MENU button. When you play DVDs that allow you to select items such as language for the sound and subtitles, select these items using the MENU button.

Selecting “ORIGINAL” or “PLAY LIST” on a DVDRW

Some DVD-RWs in VR (Video Recording) mode have two types of titles for playback: originally recorded titles (ORIGINAL) and titles that can be created on recordable DVD players for editing (PLAY LIST). You can select the type of title to be played.

Playing Discs

Press X/x to select a setting.

• PLAY LIST: plays the titles created from “ORIGINAL” for editing.

• ORIGINAL: plays the titles originally recorded.

Press ENTER.

DVP-NS50P/NS41P/NS52P

Playing VIDEO CDs With PBC Functions

PBC (Playback Control) allows you to play VIDEO CDs interactively by following the menu on the TV screen.

Number buttons

(PBC Playback)

Number buttons

MENUTOP MENU ENTER

Press TOP MENU or MENU.

The disc’s menu appears on the TV screen. The contents of the menu vary from disc to disc.

Press C/X/x/c or the number buttons to select the item you want to play or change.

If you press the number buttons, the following display appears. Press the number buttons to select the item you want.

Press ENTER.

z Hint

To play without using PBC, press ./> or the number buttons while the player is stopped to select a track, then press H or ENTER. “Play without PBC” appears on the TV screen and the player starts continuous play. You cannot play still pictures such as a menu. To return to PBC playback, press x twice then press H.

Note

Depending on the VIDEO CD, “Press ENTER” in step 3 may appear as “Press SELECT” in the instructions supplied with the disc. In this case, press H.

ENTER DISPLAY

Press DISPLAY when the player is in stop mode.

The Control Menu appears.

Press X/x to select (ORIGINAL/PLAY LIST), then press ENTER.

The options for “ORIGINAL/PLAY LIST” appear.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5 PLAY LIST PLAY LIST ORIGINAL

DVD-RW

,continued

Various Play Mode

CLEAR

(Program Play,

ENTER

DISPLAY

,continued

Functions

Shuffle Play, Repeat Play, A-B Repeat

Play)

You can set the following play modes:

• Program Play (page 29)

• Shuffle Play (page 31)

• Repeat Play (page 32)

• A-B Repeat Play (page 33)

Note

The play mode is canceled when: – you open the disc tray. – the player enters standby mode by pressing [/1.

Creating your own program (Program Play)

You can play the contents of a disc in the order you want by arranging the order of the titles, chapters, or tracks on the disc to create your own program. You can program up to 99 titles, chapters, and tracks.

Press DISPLAY.

The Control Menu appears.

Press X/x to select (PROGRAM), then press ENTER.

The options for “PROGRAM” appear.

Playing Discs

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5 OFF OFF SET ON

Press X/x to select “SETt,” then press ENTER.

“TRACK” is displayed when you play a VIDEO CD, or CD.

PROGRAM

ALL CLEAR

1. TITLE – –

2. TITLE – –

3. TITLE – –

4. TITLE – –

5. TITLE – –

6. TITLE – –

7. TITLE

Press c.

The cursor moves to the title or track row “T” (in this case, “01”).

PROGRAM

ALL CLEAR

– –

1. TITLE – –

2. TITLE – –

3. TITLE – –

4. TITLE – –

5. TITLE – –

6. TITLE – –

7. TITLE

Chapters recorded on a disc

Select the title, chapter, or track you want to program.

◆ When playing a DVD VIDEO

For example, select chapter “03” of title “02.” Press X/x to select “02” under “T,” then press ENTER.

PROGRAM

ALL CLEAR

– –

1. TITLE – –

2. TITLE – –

3. TITLE – –

4. TITLE – –

5. TITLE – –

6. TITLE – –

7. TITLE

PLAY DVD VIDEO

– –

01 02 03 04 05

Titles or tracks recorded on a disc

– –

ALL

02 03

– –

ALL

RETURN

Start playing a VIDEO CD with PBC

ENTER

functions.

The menu for your selection appears.

Press the number buttons to select the item number you want.

Press ENTER.

Follow the instructions in the menu for interactive operations.

Refer to the instructions supplied with the disc, as the operating procedure may differ depending on the VIDEO CD.

To return to the menu

Press O RETURN.

Next, press X/x to select “03” under “C,” then press ENTER.

PROGRAM

ALL CLEAR

1. TITLE 0 2

2. TITLE

3. TITLE

4. TITLE

5. TITLE

6. TITLE

7. TITLE

Selected title and chapter

◆ When playing a VIDEO CD, or CD

For example, select track “02.” Press X/x to select “02” under “T,” then press ENTER.

Selected track

PROGRAM

ALL CLEAR

1. TRACK 0 2

2. TRACK

3. TRACK

4. TRACK

5. TRACK

6. TRACK

7. TRACK

Total time of the programmed tracks

To program other titles, chapters, or tracks, repeat steps 4 to 5.

The programmed titles, chapters, and tracks are displayed in the selected order.

Press H to start Program Play.

Program Play begins. When the program ends, you can restart the same program again by pressing H.

To return to normal play

Press CLEAR, or select “OFF” in step 3. To play the same program again, select “ON” in step 3 and press ENTER.

– –

–

0 3

– –

0:15:30

– –

To change or cancel a program

Follow steps 1 to 3 of “Creating your own program (Program Play).”

Select the program number of the title, chapter, or track you want to change or cancel using X/x and press c. If you want to delete the title, chapter, or track from the program, press CLEAR.

1-7

DVP-NS50P/NS41P/NS52P

Playing repeatedly (Repeat Play)

You can play all of the titles or tracks on a disc, or a single title, chapter, or track repeatedly. You can use a combination of Shuffle or Program Play modes.

Press DISPLAY during playback.

The Control Menu appears.

Press X/x to select (REPEAT), then press ENTER.

The options for “REPEAT” appear.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5

OFF OFF DISC TITLE CHAPTER

Press X/x to select the item to be repeated.

◆ When playing a DVD VIDEO

• DISC: repeats all of the titles.

• TITLE: repeats the current title on a

disc.

• CHAPTER: repeats the current

chapter.

◆ When playing a DVD-RW

• DISC: repeats all the titles of the

selected type.

• TITLE: repeats the current title on a

disc.

• CHAPTER: repeats the current

chapter.

◆ When playing a VIDEO CD or CD

• DISC: repeats all of the tracks.

• TRACK: repeats the current track.

◆ When playing a DATA CD or DATA DVD with MP3 audio tracks or JPEG image files

• DISC: repeats all of the albums.

• ALBUM: repeats the current album.

• TRACK (MP3 audio tracks only):

repeats the current track.

DVD VIDEO

◆ When Program Play or Shuffle Play is activated

• ON: repeats Program Play or Shuffle

Play.

Press ENTER.

Repeat Play starts.

To return to normal play

Press CLEAR, or select “OFF” in step 3.

z Hint

You can set Repeat Play while the player is stopped. After selecting the “REPEAT” option, press H. Repeat Play starts.

Notes

• You cannot use this function with VIDEO CDs or Super VCDs with PBC playback.

• When repeating a DATA CD/DATA DVD which contains MP3 audio tracks and JPEG image files, and their playing times are not the same, the sound will not match the image.

• When “MODE (MP3, JPEG)” is set to “IMAGE (JPEG)” (page 52), you cannot select “TRACK.”

Repeating a specific portion (AB Repeat Play)

You can play a specific portion of a title, chapter or track repeatedly. (This function is useful when you want to memorize lyrics, etc.)

Press DISPLAY during playback.

The Control Menu appears.

Press X/x to select (A-B REPEAT), then press ENTER.

The options for “A-B REPEAT” appear.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5

OFF SET OFF

Press X/x to select “SET t,” then press ENTER.

The “A-B REPEAT” setting bar appears.

A 18 - 1:32:30 B

During playback, when you find the starting point (point A) of the portion to be played repeatedly, press ENTER.

The starting point (point A) is set.

A 18 - 1:32:55 B 18 - 1:33:05

When you reach the ending point (point B), press ENTER again.

The set points are displayed and the player starts repeating this specific portion.

PLAY DVD VIDEO

To return to normal play

Press CLEAR, or select “OFF” in step 3.

Notes

• When you set A-B Repeat Play, the settings for Shuffle Play, Repeat Play, and Program Play are canceled.

• A-B Repeat Play does not work across multiple titles.

• You may not set A-B Repeat Play for contents on a DVD-RW (VR mode) that contains still pictures.

Playing Discs

Searching for a Scene

Searching for a Particular Point on a

(Search, Scan, Slow-motion

Disc

Play, Freeze Frame)

You can quickly locate a particular point on a disc by monitoring the picture or playing back slowly.

STEP

Notes

• Depending on the disc, you may not be able to do some of the operations described.

• For DATA CDs/DATA DVDs, you can search for a particular point only on an MP3 audio track.

STEP

Locating a point quickly using the PREV (previous)/NEXT (next) buttons (Search)

You can search for the next or previous chapter, track, or scene using ./> on the player. During playback, press > or . once briefly to go to the next or previous chapter/ track/scene. Or, press and hold > or . to search forward or backwards, and release the button when you find the point you want to return to normal playback. (Search)

Locating a point quickly by playing a disc in fast forward or fast reverse (Scan)

Press m or M while playing a disc. When you find the point you want, press H to return to normal speed. Each time you press m or M during scan, the scan speed changes. With each press the indication changes as shown below. Actual speeds may differ between discs.

Playback direction

×2B t 1M t 2M t 3M

3M (DVD VIDEO/DVD-RW/VIDEO CD only) ×2B (DVD VIDEO/CD only)

Opposite direction

×2b t 1m t 2m t 3m

3m (DVD VIDEO/DVD-RW/VIDEO CD only) ×2b (DVD VIDEO only)

The “×2B”/ “×2b” playback speed is about twice the normal speed. The “3M”/“3m” playback speed is faster than “2M”/“2m” and the “2M”/“2m” playback speed is faster than “1M”/ “1m.”

Watching frame by frame (Slow-motion Play)

Press m or M when the player is in pause mode. To return to normal speed, press H. Each time you press m or M during Slow-motion Play, the playback speed changes. Two speeds are available. With each press the indication changes as follows:

Playback direction

2 y 1

Opposite direction (DVD/DVD-RW only)

2 y 1

The “2 y”/“2 ” playback speed is slower than “1 y”/“1 .”

Playing one frame at a time (Freeze Frame)

When the player is in the pause mode, press

STEP to go to the next frame. Press STEP to go to the preceding frame

(DVD/DVD-RW only). To return to normal playback, press H.

Note

You cannot search for a still picture on a DVD-RW in VR mode.

Searching for a Title/ Chapter/Track/Scene, etc.

You can search a DVD by title or chapter, and you can search a VIDEO CD/CD/DATA CD/ DATA DVD by track, index, or scene. As titles and tracks are assigned unique numbers on the disc, you can select the desired one by entering its number. You can also search for a scene using the time code.

◆ When playing a DVD VIDEO/DVD-RW

Select “TIME/TEXT” to search for a starting point by inputting the time code.

Number buttons

CLEAR

ENTER DISPLAY

Press DISPLAY. (When playing a DATA CD or DATA DVD with JPEG image files, press twice.)

The Control Menu appears.

Press X/x to select the search method.

TITLE

CHAPTER

TIME/TEXT

Searching for a Scene

,continued

1-8

DVP-NS50P/NS41P/NS52P

T 17:30 128k

JAZZ RIVER SIDE

◆ When playing a VIDEO CD or Super VCD without PBC Playback

TRACK

INDEX

◆ When playing a VIDEO CD or Super VCD with PBC Playback

SCENE

◆ When playing a CD

TRACK

◆ When playing a DATA CD/DATA DVD

ALBUM

TRACK (MP3 audio tracks only)

FILE (JPEG image files only)

Example: when you select CHAPTER “** (**)” is selected (** refers to a number). The number in parentheses indicates the total number of titles, chapters, tracks, indexes, scenes, albums or files.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5

Press ENTER.

“** (**)” changes to “-- (**).”

)

1 2 (2 7

(

)

3 4

1 : 3 2 : 5 5

Selected row

PLAY DVD VIDEO

Press the number buttons to select the title, chapter, track, index, scene, etc., number you want to search.

If you make a mistake

Cancel the number by pressing CLEAR, then select another number.

Press ENTER.

The player starts playback from the selected number.

To search for a scene using the time code (DVD VIDEO/DVD-RW only)

1 In step 2, select TIME/TEXT.

“T **:**:**” (playing time of the current title) is selected.

2 Press ENTER.

“T **:**:**” changes to “T --:--:--.”

3 Input the time code using the number

buttons, then press ENTER. For example, to find the scene at 2 hours, 10 minutes, and 20 seconds after the beginning, just enter “2:10:20.”

z Hints

• When the Control Menu display is turned off, you can search for a chapter (DVD VIDEO/DVDRW) or track (CD/DATA CD/DATA DVD) by pressing the number buttons and ENTER.

• You can display the first scene of titles, chapters, or tracks recorded on the disc on a screen divided into 9 sections. You can start playback directly by selecting one of the scenes. For details, see “Searching by Scene (PICTURE NAVIGATION)” (page 37).

Notes

• The title, chapter, or track number displayed is the same number recorded on the disc.

• You cannot search for a scene on a DVD+RW/ DVD+R using the time code.

Searching by Scene

(PICTURE NAVIGATION)

You can divide the screen into 9 subscreens and find the desired scene quickly.

PICTURE NAVI

ENTER

RETURN

Press PICTURE NAVI during playback.

The following display appears.

CHAPTER VIEWER

Press PICTURE NAVI repeatedly to select an item.

• CHAPTER VIEWER (DVD VIDEO only): displays the first scene of each chapter.

• TITLE VIEWER (DVD VIDEO only): displays the first scene of each title.

• TRACK VIEWER (VIDEO CD/ Super VCD only): displays the first scene of each track.

DISPLAY

ENTER

Press ENTER.

The first scene of each chapter, title, or track appears as follows.

Press C/X/x/c to select a chapter,

title, or track, and press ENTER.

Playback starts from the selected scene.

To return to normal play during setting

Press O RETURN or DISPLAY.

z Hint

If there are more than 9 chapters, titles, or tracks, V is displayed at the bottom right of the screen. To display the additional chapters, titles, or tracks, select the bottom scenes and press x. To return to the previous scene, select the top scenes and press X.

Note

Depending on the disc, you may not be able to select some items.

Searching for a Scene

Viewing Information About the Disc

Checking the Playing Time and Remaining Time

You can check the playing time and remaining time of the current title, chapter, or track. Also, you can check the DVD/CD text or track name (MP3 audio) recorded on the disc.

TIME/TEXT

Press TIME/TEXT during playback.

The following display appears.

T 1:01:57

Time information

Press TIME/TEXT repeatedly to change the time information.

The available time information depends upon the type of disc you are playing.

◆ When playing a DVD VIDEO or DVDRW

(hours: minutes: seconds)

•T

*:*:*

Playing time of the current title

•T–

*:*:*

Remaining time of the current title

•C

*:*:*

Playing time of the current chapter

•C–

*:*:*

Remaining time of the current chapter

◆ When playing a VIDEO CD or Super VCD (with PBC functions)

(minutes: seconds)

•

*:*

Playing time of the current scene

◆ When playing a VIDEO CD (without PBC functions), or CD

•T

(minutes: seconds)

*:*

Playing time of the current track

•T–

*:*

Remaining time of the current track

•D

*:*

Playing time of the current disc

•D–

*:*

Remaining time of the current disc

◆ When playing a Super VCD (without PBC functions)

•T

(minutes: seconds)

*:*

Playing time of the current track

◆ When playing a DATA CD or DATA DVD (MP3 audio)

•T

(minutes: seconds)

*:*

Playing time of the current track

Checking the play information of the disc

To check the DVD/CD text

Press TIME/TEXT repeatedly in step 2 to display text recorded on the DVD/CD. The DVD/CD text appears only when text is recorded in the disc. You cannot change the text. If the disc does not contain text, “NO TEXT” appears.

BRAHMS SYMPHONY

To check DATA CD/DATA DVD (MP3 audio) album name, etc.

By pressing TIME/TEXT while playing MP3 audio tracks on a DATA CD/DATA DVD, you can display the name of the album/track, and the audio bit rate (the amount of data per second of the current audio track) on your TV screen.

Album name

Bit rate

Track name

Checking the information on the front panel display

You can view the time information and text displayed on the TV screen also on the front panel display. The information on the front panel display changes as follows when you change the time information on your TV screen.

When playing a DVD VIDEO or DVD-RW

Playing time of the current title

Remaining time of the current title

Playing time of the current chapter

Remaining time of the current chapter

Text

Current title and chapter number

(returns to top automatically)

Viewing Information About the Disc

,continued

1-9

DVP-NS50P/NS41P/NS52P

When playing a DATA CD/DATA DVD (MP3 audio)

Playing time and number of the current track

Track name

Current album and track number

(returns to top automatically)

When playing a VIDEO CD (without PBC functions), or CD

Playing time and number of the current track

Remaining time of the current track

Playing time of the disc

Remaining time of the disc

Text

z Hints

• When playing VIDEO CDs without PBC functions, the track number and the index number are displayed after the text.

• When playing VIDEO CDs with PBC functions, the scene number or the playing time are displayed.

• Long text that does not fit in a single line will scroll across the front panel display.

• You can also check the time information and text using the Control Menu (page 13).

Notes

• Depending on the type of disc being played, the DVD/CD text or track name may not be displayed.

• The player can only display the first level of the DVD/CD text, such as the disc name or title.

• Playing time of MP3 audio tracks may not be displayed correctly.

• If you play a disc containing JPEG image files only, “NO AUDIO DATA” appears when “MODE (MP3, JPEG)” is set to “AUTO,” “JPEG” appears when “MODE (MP3, JPEG)” is set to “IMAGE (JPEG)” in the front panel display.

Sound Adjustments

Changing the Sound

When playing a DVD VIDEO recorded in multiple audio formats (PCM, Dolby Digital, or DTS), you can change the audio format. If the DVD VIDEO is recorded with multilingual tracks, you can also change the language. With CDs, DATA CDs, DATA DVDs, or VIDEO CDs, you can select the sound from either the right or left channel and listen to the sound of the selected channel through both the right and left speakers. For example, when playing a disc containing a song with the vocals on the right channel and the instruments on the left channel, you can hear the instruments from both speakers by selecting the left channel.

AUDIO

Press AUDIO during playback.

The following display appears.

1:ENGLISH DOLBY DIGITAL 3/2.1

Press AUDIO repeatedly to select the desired audio signal.

◆ When playing a DVD VIDEO

Depending on the DVD VIDEO, the choice of language varies. When 4 digits are displayed, they indicate a language code. See “Language Code List” on page 70 to see which language the code represents. When the same language is displayed two or more times, the DVD VIDEO is recorded in multiple audio formats.

◆ When playing a DVD-RW

The types of sound tracks recorded on a disc are displayed. The default setting is underlined. Example:

(main sound)

•1: MAIN

• 1: SUB (sub sound)

• 1: MAIN+SUB (main and sub sound)

◆ When playing a VIDEO CD, CD, or DATA CD/DATA DVD (MP3 audio)

The default setting is underlined.

• STEREO

: the standard stereo sound

• 1/L: the sound of the left channel (monaural)

• 2/R: the sound of the right channel (monaural)

◆ When playing a Super VCD

The default setting is underlined.

• 1:STEREO

: the stereo sound of the

audio track 1

• 1:1/L: the sound of the left channel of the audio track 1 (monaural)

• 1:2/R: the sound of the right channel of the audio track 1 (monaural)

• 2:STEREO: the stereo sound of the audio track 2

• 2:1/L: the sound of the left channel of the audio track 2 (monaural)

• 2:2/R: the sound of the right channel of the audio track 2 (monaural)

Notes

• While playing a Super VCD on which the audio track 2 is not recorded, no sound will come out when you select “2:STEREO,” “2:1/L,” or “2:2/R.”

• When playing DVD-RW in VR mode: If you connected to an AV amplifier (receiver) using the DIGITAL OUT (COAXIAL or OPTICAL) jack and want to switch between the sound tracks, set “DOLBY DIGITAL” to “D-PCM” in “AUDIO SETUP.”

,continued

Sound Adjustments

Checking the audio signal format

You can check the audio signal format by pressing AUDIO repeatedly during playback. The format of the current audio signal (Dolby Digital, DTS, PCM, etc.) appears as shown below.

Example:

Dolby Digital 5.1 ch

1:ENGLISH DOLBY DIGITAL

Front (L/R) + Center

Example:

Dolby Digital 3 ch

2:SPANISH DOLBY DIGITAL

Front (L/R)

About audio signals

Audio signals recorded in a disc contain the sound elements (channels) shown below. Each channel is output from a separate speaker.

• Front (L)

• Front (R)

• Center

• Rear (L)

• Rear (R)

• Rear (Monaural): This signal can be either the Dolby Surround Sound processed signals or the Dolby Digital sound’s monaural rear audio signals.

• LFE (Low Frequency Effect) signal

Note

If “DTS” is set to “OFF” in “AUDIO SETUP” (page 63) the DTS track selection option will not appear on the screen even if the disc contains DTS tracks.

Rear (L/R)

3 / 2 .1

LFE (Low Frequency Effect)

2 / 1

Rear

(Monaural)

TV Virtual Surround Settings

When you connect a stereo TV or 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV. This only works when playing a multichannel Dolby audio sound track. Furthermore, if the player is set up to output the signal from the DIGITAL OUT (COAXIAL) jack, the surround effect will only be heard when “DOLBY DIGITAL” is set to “D-PCM” in “AUDIO SETUP” (page 63).

(TVS)

SUR

Press SUR during playback.

The following display appears.

TVS DYNAMIC THEATER

Press SUR repeatedly to select one of the TVS sounds.

See the explanations given for each item in the following section.

• TVS DYNAMIC THEATER

• TVS DYNAMIC

• TVS WIDE

• TVS NIGHT

• TVS STANDARD

To cancel the setting

Select “OFF” in step 2.

◆TVS DYNAMIC THEATER

Creates one set of LARGE virtual rear speakers and virtual subwoofer from the sound of the front speakers (L, R) without using actual rear speakers and subwoofer (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV.

Sub woofer

◆TVS DYNAMIC

Creates one set of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV.

◆TVS WIDE

Creates five sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV.

◆TVS NIGHT

Large sounds, such as explosions, are suppressed, but the quieter sounds are unaffected. This feature is useful when you want to hear the dialog and enjoy the surround sound effects of “TVS WIDE” at low volume.

◆TVS STANDARD

Creates three sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). Use this setting when you want to use TVS with 2 separate speakers.

• When the playing signal does not contain a signal

• When you select one of the TVS modes, turn off

• Make sure that your listening position is between

• Not all discs will respond to the “TVS NIGHT”

• The TVS effects do not work when using the Fast

L R

L: Front speaker (left) R: Front speaker (right)

: Virtual speaker

Notes

for the rear speakers, the surround effects cannot be heard.

the surround setting of the connected TV or amplifier (receiver).

and at an equal distance from your speakers, and that the speakers are located in similar surroundings.

function in the same way.

Play or Slow Play functions, even though you can change the TVS modes.

Sound Adjustments

1-10

DVP-NS50P/NS41P/NS52P

()

Enjoying Movies

Changing the Angles

If various angles (multi-angles) for a scene are recorded on the DVD VIDEO, “ ” appears in the front panel display. This means that you can change the viewing angle.

ANGLE

Press ANGLE during playback.

The number of the angle appears on the display.

Press ANGLE repeatedly to select an angle number.

The scene changes to the selected angle.

Note

Depending on the DVD VIDEO, you may not be able to change the angles even if multi-angles are recorded on the DVD VIDEO.

Displaying the Subtitles

If subtitles are recorded on the discs, you can change the subtitles or turn them on and off whenever you want while playing a DVD.

SUBTITLE

Press SUBTITLE during playback.

The following display appears.

1:ENGLISH

Press SUBTITLE repeatedly to select a setting.

◆ When playing a DVD VIDEO

Select the language. Depending on the DVD VIDEO, the choice of language varies. When 4 digits are displayed, they indicate a language code. See “Language Code List” on page 70 to see which language the code represents.

◆ When playing a DVD-RW

Select “ON.”

To turn off the subtitles

Select “OFF” in step 2.

Notes

• Depending on the DVD VIDEO, you may not be able to change the subtitles even if multilingual subtitles are recorded on it. You also may not be able to turn them off.

• While playing a disc with subtitles, the subtitle may disappear when you press FAST PLAY or SLOW PLAY button.

Adjusting the Playback Picture

(CUSTOM PICTURE MODE)

You can adjust the video signal of the DVD, VIDEO CD or DATA CD/DATA DVD in JPEG format from the player to obtain the picture quality you want. Choose the setting that best suits the program you are watching. When you select “MEMORY,” you can make further adjustments to each element of the picture (color, brightness, etc.).

ENTER

RETURN

Press DISPLAY during playback. (When playing a DATA CD/DATA DVD, press twice)

The Control Menu appears.

Press X/x to select (CUSTOM PICTURE MODE), then press ENTER.

The options for “CUSTOM PICTURE MODE” appear.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5

DISPLAY

DVD VIDEO

Enjoying Movies

Press X/x to select the setting you want.

The default setting is underlined.

•

STANDARD:

• DYNAMIC 1: produces a bold dynamic picture by increasing the picture contrast and the color intensity.

• DYNAMIC 2: produces a more dynamic picture than DYNAMIC 1 by further increasing the picture contrast and color intensity.

• CINEMA 1: enhances details in dark areas by increasing the black level.

• CINEMA 2: white colors become brighter and black colors become richer, and the color contrast is increased.

• MEMORY: adjusts the picture in greater detail.

Press ENTER.

The selected setting takes effect.

z Hint

When you watch a movie, “CINEMA 1” or “CINEMA 2” is recommended.

displays a standard picture.

Adjusting the picture items in “MEMORY”

You can adjust each element of the picture individually.

• PICTURE: changes the contrast

• BRIGHTNESS: changes the overall brightness

• COLOR: makes the colors deeper or lighter

• HUE: changes the color balance

In step 3 of “Adjusting the Playback Picture,” select “MEMORY” and press ENTER.

The “PICTURE” adjustment bar appears.

0 1 : 3 2 : 5 5

Press C/c to adjust the picture contrast.

To go the next or previous picture item without saving the current setting, press X/x.

Press ENTER.

The adjustment is saved, and “BRIGHTNESS” adjustment bar appears.

Repeat step 2 and 3 to adjust “BRIGHTNESS,” “COLOR,” and “HUE.”

To turn off the display

Press O RETURN , or DISPLAY.

Note

The “BRIGHTNESS” setting is not effective if you connect the player via the LINE OUT (VIDEO) or S VIDEO OUT jack and select “PROGRESSIVE AUTO” or “PROGRESSIVE VIDEO” by using the PROGRESSIVE button on the front panel.

Sharpening the Pictures

(SHARPNESS)

You can enhance the outlines of images to produce a sharper picture.

ENTER DISPLAY

Press DISPLAY during playback (when playing a DATA CD/DATA DVD, press twice).

The Control Menu appears.

Press X/x to select (SHARPNESS), then press ENTER.

The options for “SHARPNESS” appear.

)

1 2 (2 7 1 8 (3 4 T

OFF 1 2 OFF

)

1 : 3 2 : 5 5

DVD VIDEO

STANDARD STANDARD

DYNAMIC 1

,continued

Press ENTER.

The selected setting takes effect.

To cancel the “SHARPNESS” setting

Select “OFF” in step 3.

Note

This setting is not effective if you connect the player via the LINE OUT (VIDEO) or S VIDEO OUT jack and select “PROGRESSIVE AUTO” or “PROGRESSIVE VIDEO” by using the PROGRESSIVE button on the front panel.

Enjoying Movies

Press X/x to select a level.

PICTURE

• 1: enhances the outline.

• 2: enhances the outline more than 1.

1-11

DVP-NS50P/NS41P/NS52P

Enjoying MP3 Audio and JPEG Images

About MP3 Audio Tracks and JPEG Image Files

MP3 is audio compression technology that satisfies the ISO/IEC MPEG regulations. JPEG is image compression technology. You can play DATA CDs/DATA DVDs that contain MP3 audio tracks or JPEG image files.

DATA CDs/DATA DVDs that the player can play

You can play back DATA CDs (CD-ROMs/ CD-Rs/CD-RWs) or DATA DVDs (DVDROMs/DVD+RWs/DVD+Rs/DVD-RWs/ DVD-Rs) recorded in MP3 (MPEG-1 Audio Layer III) and JPEG format. However, this player only plays DATA CDs whose logical format is ISO 9660 Level 1/ Level 2 or Joliet, and DATA DVDs of Universal Disk Format (UDF). Refer to the instructions supplied with the disc drives and the recording software (not supplied) for details on the recording format.

Note

The player may not be able to play some DATA CDs/DATA DVDs created in the Packet Write format.

MP3 audio track or JPEG image file that the player can play

The player can play the following tracks and files: – MP3 audio tracks with the extension

“.MP3.”

– JPEG image files with the extension

“.JPEG” or “.JPG.”

– JPEG image files that conform to the DCF*

image file format.

* “Design rule for Camera File system”: Image

standards for digital cameras regulated by JEITA (Japan Electronics and Information Technology Industries Association).

Notes

• The player will play any data with the extension “.MP3,” “.JPG,” or “.JPEG,” even if they are not in MP3 or JPEG format. Playing these data may generate a loud noise which could damage your speaker system.

• The player does not conform to audio tracks in mp3PRO format.

• Some JPEG files cannot be played.

About playback order of albums, tracks, and files

Albums play in the following order:

◆Structure of disc contents

Tree 1 Tree 2 Tree 3 Tree 4 Tree 5

ROOT

Album

Track or file

When you insert a DATA CD/DATA DVD and press H, the numbered tracks (or files) are played sequentially, from 1 through 7. Any sub-albums/tracks (or files) contained within a currently selected album take priority over the next album in the same tree. (Example: C contains D so 4 is played before 5.)

When you press MENU and the list of album names appears (page 50), the album names are arranged in the following order: A t B t Ct D t Ft G. Albums that do not contain tracks (or files) (such as album E) do not appear in the list.

z Hints

• If you add numbers (01, 02, 03, etc.) to the front of the track/file names when you store the tracks (or files) in a disc, the tracks and files will be played in that order.

• Since a disc with many trees takes longer to start playback, it is recommended that you create albums with no more than two trees.

Notes

• Depending on the software you use to create the DATA CD/DATA DVD, the playback order may differ from the above illustration.

• The playback order above may not be applicable if there are more than 200 albums and 300 tracks/ files in each album.

• The player can recognize up to 200 albums (the player will count just albums, including albums that do not contain MP3 audio tracks and JPEG image files). The player will not play any albums beyond the 200th album.

• Proceeding to the next or another album may take some time.

Playing MP3 Audio Tracks or JPEG Image Files

You can play MP3 audio tracks and JPEG image files on DATA CDs (CD-ROMs/CDRs/CD-RWs) or DATA DVDs (DVD-ROMs/ DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs).

PICTURE

CLEAR

RETURN

ZOOM

z Hint

You can view the disc information while playing MP3 audio tracks (page 38).

Notes

• DATA CDs recorded in KODAK Picture CD format automatically start playing when inserted.

• If no MP3 audio track or JPEG image file is recorded on the DATA CD/DATA DVD, “No audio data” or “No image data” appears on the screen.

NAVI MENU ENTER

Enjoying MP3 Audio and JPEG Images

Selecting an album

Press MENU.

The list of albums on the disc appears. When an album is being played, its title is shaded.

)

1 (3 0

ROCK BEST HIT KARAOKE JAZZ R&B MY FAVORITE SONGS CLASSICAL SALSA OF CUBA BOSSANOVA

Press X/x to select the album you want to play.

Press H.

Playback starts from the selected album. To select MP3 audio tracks, see “Selecting an MP3 audio track” (page 50). To select JPEG image files, see “Selecting a JPEG image file” (page 51).

To stop playback

Press x.

To go to the next or previous page

Press c or C.

To turn on or off the display

Press MENU repeatedly.

z Hint

Of the selected album, you can select to play only the MP3 audio tracks, JPEG image files, or both, by setting “MODE (MP3, JPEG)” (page 52).

Selecting an MP3 audio track

After step 2 of “Selecting an album,” press ENTER.

The list of tracks in the album appears.

JAZZ

)

1 ( 9 0

01SHE IS SPECIAL 02ALL YOU NEED IS ... 03SPICY LIFE 04HAPPY HOUR 05RIVER SIDE 06 5 07TAKE TIME,TAKE TIME

Press X/x to select a track, and press ENTER.

Playback starts from the selected track.

To stop playback

Press x.

To go to the next or previous page

Press c or C.

To return to the previous display

Press O RETURN.

To go to the next or previous MP3 audio track

Press > or . during playback. You can select the first track of the next album by pressing > during playback of the last track of the current album. Note that you cannot return to the previous album by using ., and that you need to select the previous album from the album list.

Selecting a JPEG image file

After step 2 of “Selecting an album,” press PICTURE NAVI.

The image files in the album appear in 16 subscreens. A scroll box is displayed on the right.

1234

5678

9101112

13 14 15 16

To display the additional image, select the bottom images and press x. To return to the previous image, select the top images and press X.

Press C/X/x/c to select the image you want to view, and press ENTER.

The selected image appears. Example

To go to the next or previous JPEG image file

Press C or c during playback. You can select the first file of the next album by pressing c during playback of the last file of the current album. Note that you cannot return to the previous album by using C, and that you need to select the previous album from the album list.

,continued

To rotate a JPEG image

Press X/x while viewing the image. Each time you press X, the image rotates counterclockwise by 90 degrees. To return to normal view, press CLEAR. Note that the view also returns to normal if you press C/c to go to the next or previous image. Example: when X is pressed once.

Rotating direction

To magnify a JPEG image (ZOOM)

Press ZOOM while viewing the image. You can enlarge the image up to four times the original size, and scroll using C/X/x/c. To return to normal view, press CLEAR.

◆When pressed once (x2)

The image enlarges twice the original size.

◆When pressed twice (x4)

The image enlarges four times the original size.

To stop viewing the JPEG image

Press x.

z Hints

• While viewing JPEG image files, you can set options such as “INTERVAL” (page 53), “EFFECT” (page 53), and “SHARPNESS” (page 47).

• You can view JPEG images files without MP3 audio by setting “MODE (MP3, JPEG)” to “IMAGE (JPEG)” (page 52).

• The date the picture was taken is displayed beside “DATE” in the Control Menu (page 13). Note that no date may appear depending on the digital camera.

Note

PICTURE NAVI does not work if “AUDIO (MP3)” is selected in “MODE (MP3, JPEG)” (page 52).

Enjoying MP3 Audio and JPEG Images

1-12

DVP-NS50P/NS41P/NS52P

Enjoying JPEG Images as a Slide Show

You can play JPEG image files on a DATA CD or DATA DVD successively as a slide show.

Press MENU.

The list of albums on the DATA CD/ DATA DVD appears.

)

1 (3 0

ROCK BEST HIT KARAOKE JAZZ R&B MY FAVORITE SONGS CLASSICAL SALSA OF CUBA BOSSANOVA

Press X/x to select an album.

Press H.

The JPEG images in the selected album start playing as a slide show.

To stop playback

Press x.

Notes

• The slide show stops when X/x or ZOOM is

pressed.To resume the slide show, press H.

• This function does not work if “MODE (MP3, JPEG)” is set to “AUDIO (MP3)” (page 52).

MENU ENTER DISPLAY

Viewing a slide show with sound (MODE (MP3, JPEG))

When JPEG image files and MP3 audio tracks are placed in the same album, you can enjoy a slide show with sound.

Press DISPLAY during stop mode.

The Control Menu appears.

Press X/x to select (MODE (MP3, JPEG)), and press ENTER.

The options for “MODE (MP3, JPEG)” appear.

)

1 2 (2 7

)

1 8 (3 4 T

3 2 : 5 5 AUTO AUTO AUDIO (MP3) IMAGE (JPEG)

Press X/x to select “AUTO” (default), and press ENTER.

• AUTO: plays both the JPEG image files and MP3 audio tracks in the same album as a slide show.

• AUDIO (MP3): plays only MP3 audio tracks continuously.

• IMAGE (JPEG): plays only JPEG image files continuously.

Press MENU.

The list of albums on the DATA CD/ DATA DVD appears.

1 (3 0

ROCK BEST HIT KARAOKE JAZZ R&B MY FAVORITE SONGS CLASSICAL SALSA OF CUBA BOSSANOVA

Press X/x to select the album that contains both the MP3 audio tracks and JPEG images you want to play.

Press H.

A slide show starts with sound.

DATA CD

MP3

)

z Hints

• To repeat both MP3 audio tracks and JPEG image files in a single album, repeat the same MP3 audio track or album when “MODE (MP3, JPEG)” is set to “AUTO.” See “Playing repeatedly (Repeat Play)” (page 32) to repeat the track or album.

• The player recognizes a maximum of 200 albums regardless of the selected mode. Of each album, the player recognizes up to 300 MP3 audio tracks and 300 JPEG image files when “AUTO” is selected, 600 MP3 audio tracks when “AUDIO (MP3)” is selected, 600 JPEG image files when “IMAGE (JPEG)” is selected.

Notes

• This function does not work if the MP3 audio tracks and JPEG image files are not placed in the same album.

• If playing time of JPEG image or MP3 audio is longer than the other, the longer one continues without sound or image.

• If you play large MP3 track data and JPEG image data at the same time, the sound may skip. It is recommended that you set the MP3 bit rate to 128 kbps or lower when creating the file. If the sound still skips, then reduce the size of the JPEG file.

Setting the pace for a slide show (INTERVAL)

You can set the time the slides are displayed on the screen.

Press DISPLAY twice while viewing a JPEG image or when the player is in stop mode.

The Control Menu appears.

Press X/x to select (INTERVAL), then press ENTER.

The options for “INTERVAL” appear.

1 2)

3 (

1( 1 0 / 2 9 / 2 0 0 5 NORMAL NORMAL FAST SLOW 1 SLOW 2

Press X/x to select a setting.

The default setting is underlined.

: sets the duration to between

•NORMAL 6 to 9 seconds.

• FAST: sets a duration shorter than NORMAL.

DATA CD

JPEG

• SLOW 1: sets a duration longer than NORMAL.

• SLOW 2: sets a duration longer than SLOW 1.

Press ENTER.

Note

Some JPEG files, especially progressive JPEG files or JPEG files of 3,000,000 pixels or more, may take longer to display than others, which may make the duration seem longer than the setting you selected.

Selecting the slides’ appearance (EFFECT)

You can select the way the slides are displayed during a slide show.

Press DISPLAY twice while viewing a JPEG image or when the player is in stop mode.

Press X/x to select (EFFECT), then press ENTER.

The options for “EFFECT” appear.

1 2)

3 (

10 / 2 9 / 2 0 0 5

MODE 1 MODE 1 MODE 2 MODE 3 MODE 4 MODE 5 OFF

WIPE

Press X/x to select a setting.

The default setting is underlined.

•MODE 1

: the image sweeps in from top

to bottom.

• MODE 2: the image sweeps in from left to right.

• MODE 3: the image stretches out from the center of the screen.

• MODE 4: the images randomly cycle through the effects.

• MODE 5: the next image slides over the previous image.

• OFF: turns off this function.

Press ENTER.

DATA CD

JPEG

Enjoying MP3 Audio and JPEG Images

Using Various Additional Functions

Locking Discs

(CUSTOM

PARENTAL CONTROL, PARENTAL

CONTROL)

You can set two kinds of playback restrictions for a disc.

• Custom Parental Control You can set playback restrictions so that the player will not play inappropriate discs.

• Parental Control Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users. Scenes may be blocked or replaced with different scenes.

The same password is used for both Parental Control and Custom Parental Control.

Number buttons

Custom Parental Control

You can set the same Custom Parental Control password for up to 40 discs. When you set the 41st-disc, the first disc is canceled.

Insert the disc you want to lock.

If the disc is playing, press x to stop playback.

Press DISPLAY while the player is in stop mode.

The Control Menu appears.

Press X/x to select (PARENTAL CONTROL), then press ENTER.

ENTER DISPLAY

The options for “PARENTAL CONTROL” appear.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5

ON PLAYER PASSWORD OFF

Press X/x to select “ON t,” then press ENTER.

◆ If you have not entered a password

The display for registering a new password appears.

PARENTAL CONTROL

Enter a new 4-digit password,

ENTER

then press

Enter a 4-digit password using the number buttons, then press ENTER. The display for confirming the password appears.

◆ When you have already registered a password

The display for entering the password appears.

Enter or re-enter your 4-digit password using the number buttons, then press ENTER.

“Custom parental control is set.” appears and then the screen returns to the Control Menu.

To turn off the Custom Parental Control function

Follow steps 1 to 3 of “Custom Parental Control.”

Press X/x to select “OFF t,” then press ENTER.

Enter your 4-digit password using the number buttons, then press ENTER.

STOP DVD VIDEO

To play a disc for which Custom Parental Control is set

Insert the disc for which Custom Parental Control is set. The “CUSTOM PARENTAL CONTROL” display appears.

CUSTOM PARENTAL CONTROL

Custom parental control is already set. To play, enter your password

ENTER

and press

Enter your 4-digit password using the number buttons, then press ENTER. The player is ready for playback.

z Hint

If you forget your password, enter the 6-digit number “199703” using the number buttons when the “CUSTOM PARENTAL CONTROL” display asks you for your password, then press ENTER. The display will ask you to enter a new 4-digit password.

Parental Control (limited playback)

Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users. The “PARENTAL CONTROL” function allows you to set a playback limitation level.

Press DISPLAY while the player is in stop mode.

The Control Menu appears.

Press X/x to select (PARENTAL CONTROL), then press ENTER.

The options for “PARENTAL CONTROL” appear.

)

1 2 (2 7 1 8 (3 4 T

1 : 3 2 : 5 5

ON PLAYER PASSWORD OFF

)

STOP DVD VIDEO

Press X/x to select “PLAYER t,” then press ENTER.

◆ If you have not entered a password

The display for registering a new password appears.

PARENTAL CONTROL

Enter a new 4-digit password,

ENTER

then press

Enter a 4-digit password using the number buttons, then press ENTER. The display for confirming the password appears.

◆ When you have already registered a password

The display for entering the password appears.

Enter or re-enter your 4-digit password using the number buttons, then press ENTER.

The display for setting the playback limitation level appears.

PARENTAL CONTROL

LEVEL: OFF STANDARD:

Press X/x to select “STANDARD,” then press ENTER.

The selection items for “STANDARD” are displayed.

PARENTAL CONTROL

LEVEL: OFF STANDARD:

OTHERS

USA

USA USA

,continued

Using Various Additional Functions

1-13

DVP-NS50P/NS41P/NS52P

Press X/x to select a geographic area as the playback limitation level, then press ENTER.

The area is selected. When you select “OTHERS t,” select and enter a standard code in the table on page 70 using the number buttons.

Press X/x to select “LEVEL,” then press ENTER.

The selection items for “LEVEL” are displayed.

PARENTAL CONTROL

LEVEL: OFF STANDARD:

Select the level you want using X/x, then press ENTER.

Parental Control setting is complete.

PARENTAL CONTROL

LEVEL: STANDARD: USA

The lower the value, the stricter the limitation.

To turn off the Parental Control function

Set “LEVEL” to “OFF” in step 8.

To play a disc for which Parental Control is set

1 Insert the disc and press H.

The display for entering your password appears.

2 Enter your 4-digit password using the

number buttons, then press ENTER. The player starts playback.

OFF

NC17

7: 6: 5:

4: PG13

z Hint

If you forget your password, remove the disc and repeat steps 1 to 3 of “Parental Control (limited playback).” When you are asked to enter your password, enter “199703” using the number buttons, then press ENTER. The display will ask you to enter a new 4-digit password. After you enter a new 4-digit password, replace the disc in the player and press H. When the display for entering your password appears, enter your new password.

Notes

• When you play discs which do not have the Parental Control function, playback cannot be limited on this player.

• Depending on the disc, you may be asked to change the parental control level while playing the disc. In this case, enter your password, then change the level. If the Resume Play mode is canceled, the level returns to the previous level.

Changing the password

Press DISPLAY while the player is in stop mode.

The Control Menu appears.

Press X/x to select (PARENTAL CONTROL), then press ENTER.

The options for “PARENTAL CONTROL” appear.

Press X/x to select “PASSWORD t,” then press ENTER.

The display for entering the password appears.

Enter your 4-digit password using the number buttons, then press ENTER.

Enter a new 4-digit password using the number buttons, then press ENTER.

To confirm your password, re-enter it using the number buttons, then press ENTER.

If you make a mistake entering your password

Press C before you press ENTER and input the correct number.

Controlling Your TV with the Supplied Remote

You can control the sound level, input source, and power switch of your Sony TV with the supplied remote.

Number buttons

You can control your TV using the buttons below.

By pressing You can

TV [/1 Turn the TV on or off

VOL +/– Adjust the volume of the TV

TV/VIDEO Switch the TV’s input source

Note

Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote.

between the TV and other input sources.

VOL +/–

TV/VIDE

Controlling other TVs with the remote

You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer’s code.

While holding down TV [/1, press the number buttons to select your TV’s manufacturer’s code (see the table below).

Release TV [/1.

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer Code number

Sony 01 (default)

Daewoo 04, 22

Hitachi 02, 04

JVC 09

LG/Goldstar 04

MGA/Mitsubishi 04, 13

Panasonic 19

Philips 21

RCA 04, 10

Samsung 04, 20

Sharp 18

Toshiba 07, 18

Notes

• When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

• Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote.

Using Various Additional Functions

Settings and Adjustments

Using the Setup Display

By using the Setup Display, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup Display, among other things. For details on each Setup Display item, see pages from 59 to 63.

Note

Playback settings stored in the disc take priority over the Setup Display settings and not all of the functions described may work.

ENTER DISPLAY

Press DISPLAY when the player is in stop mode.

The Control Menu appears.

Press X/x to select (SETUP), then press ENTER.

The options for “SETUP” appear.

(47)

QUICK CUSTOM RESET QUICK

STOP DVD VIDEO

Press X/x to select “CUSTOM,” then press ENTER.

The Setup Display appears.

LANGUAGE SETUP

OSD: MENU: AUDIO: SUBTITLE:

Press X/x to select the setup item

ENGLISH ENGLISH

ORIGINAL

ENGLISH

from the displayed list: “LANGUAGE SETUP,” “SCREEN SETUP,” “CUSTOM SETUP,” or “AUDIO SETUP.” Then press ENTER.

The Setup item is selected. Example: “SCREEN SETUP”

Selected item

SCREEN SETUP

TV TYPE: SCREEN SAVER: BACKGROUND:

BLACK LEVEL: BLACK LEVEL 4:3 OUTPUT:

Setup items

Press X/x to select an item, then

4:3 LETTER BOX

JACKET PICTURE

(COMPONENT OUT)

press ENTER.

The options for the selected item appear. Example: “TV TYPE”

SCREEN SETUP

TV TYPE: SCREEN SAVER: BACKGROUND:

BLACK LEVEL: BLACK LEVEL 4:3 OUTPUT:

4:3 LETTER BOX 4:3 LETTER BOX

(COMPONENT OUT)

4:3 PAN SCAN

Options

FULL

Press X/x to select a setting, then press ENTER.

The setting is selected and setup is complete. Example: “16:9”

SCREEN SETUP

TV TYPE: SCREEN SAVER: BACKGROUND:

BLACK LEVEL: BLACK LEVEL 4:3 OUTPUT:

To enter the Quick Setup mode

Select “QUICK” in step 3. Follow from step 5 of the Quick Setup explanation to make basic adjustments (page 22).

Selected setting

JACKET PICTURE

(COMPONENT OUT)

FULL

To reset all of the “SETUP” settings

Select “RESET” in step 3 and press ENTER.

OFF

16.9 OFF

Select “YES” using X/x. You can also quit the process and return to the Control Menu by selecting “NO” here.

Press ENTER. All the settings explained on pages 59 to 63 return to the default settings. Do not press [/1 while resetting the player, which takes a few seconds to complete.

Setting the Display or Sound Track Language

(LANGUAGE SETUP)

“LANGUAGE SETUP” allows you to set various languages for the on-screen display or

16:9

sound track.

Select “LANGUAGE SETUP” in the Setup

OFF

Display. To use the display, see “Using the Setup Display” (page 58).

◆ OSD (On-Screen Display)

Switches the display language on the screen.

◆ MENU (DVD VIDEO only)

You can select the desired language for the disc’s menu.

◆ AUDIO (DVD VIDEO only)

Switches the language of the sound track. When you select “ORIGINAL,” the language given priority in the disc is selected.

◆ SUBTITLE (DVD VIDEO only)

Switches the language of the subtitle recorded on the DVD VIDEO. When you select “AUDIO FOLLOW,” the language for the subtitles changes according to the language you selected for the sound track.

z Hint

If you select “OTHERS t” in “MENU,” “SUBTITLE,” or “AUDIO,” select and enter a language code from “Language Code List” on page 70 using the number buttons.

Note

If you select a language in “MENU,” “SUBTITLE,” or “AUDIO” that is not recorded on a DVD VIDEO, one of the recorded languages will be automatically selected.

LANGUAGE SETUP

OSD: MENU: AUDIO: SUBTITLE:

ENGLISH ENGLISH

ORIGINAL

ENGLISH

Settings and Adjustments

1-14

DVP-NS50P/NS41P/NS52P

Settings for the Display

(SCREEN SETUP)

Choose settings according to the TV to be connected.

Select “SCREEN SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 58). The default settings are underlined.

◆ TV TYPE

Selects the aspect ratio of the connected TV (4:3 standard or wide).

SCREEN SETUP

TV TYPE: SCREEN SAVER: BACKGROUND:

BLACK LEVEL: BLACK LEVEL

4:3 OUTPUT:

4:3 LETTER BOX

4:3 PAN SCAN

16:9 Select this when you connect a

Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen.

Select this when you connect a 4:3 screen TV. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.

wide-screen TV or a TV with a wide mode function.

4:3 LETTER BOX

4:3 PAN SCAN

16:9

4:3 LETTER BOX

JACKET PICTURE

(COMPONENT OUT)

FULL

Note

Depending on the DVD, “4:3 LETTER BOX” may be selected automatically instead of “4:3 PAN SCAN” or vice versa.

◆ SCREEN SAVER

The screen saver image appears when you leave the player in pause or stop mode for 15 minutes, or when you play a CD, or DATA CD/DATA DVD (MP3 audio) for more than 15 minutes. The screen saver will help prevent your display device from becoming damaged (ghosting). Press H to turn off the screen saver.

ON Turns on the screen saver.

OFF Turns off the screen saver.

OFF

◆ BACKGROUND

Selects the background color or picture on the TV screen when the player is in stop mode or while playing a CD, or DATA CD/DATA DVD (MP3 audio).

JACKET PICTURE

GRAPHICS A preset picture stored in the

BLUE The background color is blue. BLACK The background color is black.

◆ BLACK LEVEL

Selects the black level (setup level) for the video signals output from the jacks other than COMPONENT VIDEO OUT.

The jacket picture (still picture) appears, but only when the jacket picture is already recorded on the disc (CDEXTRA, etc.). If the disc does not contain a jacket picture, the “GRAPHICS” picture appears.

player appears.

Sets the black level of the output signal to the standard level.

OFF Lowers the standard black

level. Use this when the picture becomes too white.

Additional Information

Troubleshooting

If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer (For customers in the USA only).

Power

The power is not turned on.

, Check that the power cord is connected

securely.

Picture

There is no picture/picture noise appears.

, Re-connect the connecting cord securely. , The connecting cords are damaged. , Check the connection to your TV (page 17)

and switch the input selector on your TV so that the signal from the player appears on the TV screen.

, The disc is dirty or flawed. , If the picture output from your player goes

through your VCR to get to your TV or if you are connected to a combination TV/ VIDEO player, the copy-protection signal applied to some DVD programs could affect picture quality. If you still experience problems even when you connect your player directly to your TV, try connecting your player to your TV’s S VIDEO input (page 17).

, You have selected “PROGRESSIVE

AUTO” or “PROGRESSIVE VIDEO” using the PROGRESSIVE button on the front panel (the PROGRESSIVE indicator lights up) even though your TV cannot accept the progressive signal. In this case, select “NORMAL (INTERLACE)” so that the PROGRESSIVE indicator turns off.

, Even if your TV is compatible with

progressive format 480p signals, the image may be affected when you set the player to progressive format. In this case, select “NORMAL (INTERLACE)” using the PROGRESSIVE button on the front panel so that the PROGRESSIVE indicator turns off and the player is set to normal (interlace) format.

The picture does not fill the screen, even though the aspect ratio is set in “TV TYPE” under “SCREEN SETUP.”

, The aspect ratio of the disc is fixed on your

DVD.

Sound

There is no sound.

, Re-connect the connecting cord securely. , The connecting cord is damaged. , The player is connected to the wrong input

jack on the amplifier (receiver) (page 20).

, The amplifier (receiver) input is not

correctly set.

, The player is in pause mode or in Slow-

motion Play mode.

, The player is in fast forward or fast reverse

mode.

, If the audio signal does not come through

the DIGITAL OUT (COAXIAL) jack, check the audio settings (page 63).

, While playing a Super VCD on which the

audio track 2 is not recorded, no sound will come out when you select “2:STEREO,” “2:1/L,” or “2:2/R.”

Sound distortion occurs.

, Set “AUDIO ATT” in “AUDIO SETUP” to

“ON” (page 62).

The sound volume is low.

, The sound volume is low on some DVDs.

The sound volume may improve if you set “AUDIO DRC” in “AUDIO SETUP” to “TV MODE” (page 62).

, Set “AUDIO ATT” in “AUDIO SETUP” to

“OFF” (page 62).

Operation

The remote does not function.

, The batteries in the remote are weak. , There are obstacles between the remote and

the player.

, The distance between the remote and the

player is too far.

, The remote is not pointed at the remote

sensor on the player.

The disc does not play.

, The disc is turned over.

Insert the disc with the playback side facing down.

, The disc is skewed. , The player cannot play certain discs

(page 8).

, The region code on the DVD does not match

the player.

, Moisture has condensed inside the player

(page 5)

, The player cannot play a recorded disc that

is not correctly finalized

The MP3 audio track cannot be played (page 49).

, The DATA CD is not recorded in an MP3

format that conforms to ISO 9660 Level 1/ Level 2 or Joliet.

, The DATA DVD is not recorded in MP3

format that conforms to UDF (Universal Disk Format).

, The MP3 audio track does not have the

extension “.MP3.”

, The data is not formatted in MP3 even

though it has the extension “.MP3.”

, The data is not MPEG-1 Audio Layer III

data.

, The player cannot play audio tracks in

mp3PRO format.

, “MODE (MP3, JPEG)” is set to “IMAGE

(JPEG)” (page 52).

The JPEG image file cannot be played (page 49).

, The DATA CD is not recorded in a JPEG

format that conforms to ISO 9660 Level 1/ Level 2, or Joliet.

, The DATA DVD is not recorded in JPEG

format that conforms to UDF (Universal Disk Format).

, The file has an extension other than

“.JPEG” or “.JPG.”

(page 9)

, The image is larger than 3072 (width) ×

2048 (height) in normal mode, or more than 3,300,000 pixels in progressive JPEG. (Some progressive JPEG files cannot be displayed even if the file size is within this specified capacity.)

, The image does not fit the screen (the image

is reduced).

, “MODE (MP3, JPEG)” is set to “AUDIO

(MP3)” (page 52).

The MP3 audio tracks and JPEG image files start playing simultaneously.

, “MODE (MP3, JPEG)” is set to “AUTO”

(page 52).

The album/track/file names are not displayed correctly.

, The player can only display numbers and

alphabet. Other characters are displayed as “*”.

The disc does not start playing from the beginning.

, Program Play, Shuffle Play, Repeat Play, or

A-B Repeat Play is selected (page 29).

, Resume play has taken effect (page 26).

The player starts playing the disc automatically.

, The disc features an auto playback function. , “AUTO PLAY” in “CUSTOM SETUP” is

set to “ON” (page 61).

Playback stops automatically.

, While playing discs with an auto pause

signal, the player stops playback at the auto pause signal.

Some functions such as Stop, Search, Fast Play, Slow Play, Slow-motion Play, Repeat Play, Shuffle Play, or Program Play cannot be performed.

, Depending on the disc, you may not be able

to do some of the operations above. Refer to the operating manual that comes with the disc.

,continued

Additional Information

The language for the sound track cannot be changed.

, Try using the DVD’s menu instead of the

direct selection button on the remote (page 27).

, Multilingual tracks are not recorded on the

DVD being played.

, The DVD prohibits the changing of the

language for the sound track.

The subtitle language cannot be changed or turned off.

, Try using the DVD’s menu instead of the

direct selection button on the remote (page 27).

, Multilingual subtitles are not recorded on

the DVD being played.

, The DVD prohibits the changing of

subtitles.

The angles cannot be changed.

, Try using the DVD’s menu instead of the

direct selection button on the remote (page 27).

, Multi-angles are not recorded on the DVD

being played.

, The angle can only be changed when the

“ ” indicator lights up on the front panel display (page 11).

, The DVD prohibits changing of the angles.

The player does not operate properly.

, When static electricity, etc., causes the

player to operate abnormally, unplug the player.

5 numbers or letters are displayed on the screen and on the front panel display.

, The self-diagnosis function was activated.

(See the table on page 67.)

The disc tray does not open and “LOCKED” appears on the front panel display.

, Child Lock is set (page 25).

The disc tray does not open and “TRAY LOCKED” appears on the front panel display.

, Contact your Sony dealer or local

authorized Sony service facility.

“Data error” appears on the TV screen when playing a DATA CD/DATA DVD.

, The MP3 audio track/JPEG image file you

want to play is broken.

, The data is not MPEG-1 Audio Layer III

data.

, The JPEG image file format does not

conform to DCF (page 48).

, The JPEG image file has the extension

“.JPG” or “.JPEG,” but is not in JPEG format.

1-15

DVP-NS50P/NS41P/NS52P

Self-diagnosis Function

(When letters/numbers appear in the

display)

When the self-diagnosis function is activated to prevent the player from malfunctioning, a five-character service number (e.g., C 13 50) with a combination of a letter and four digits appears on the screen and the front panel display. In this case, check the following table.

C:13:50

First three characters of the service number

C 13 The disc is dirty or recorded

C 31 The disc is not inserted

E XX

(xx is a number)

Cause and/or corrective action

in a format that this player cannot play (page 8). ,Clean the disc with a soft

cloth or check its format (page 2).

correctly. ,Re-insert the disc

correctly.

To prevent a malfunction, the player has performed the self-diagnosis function. ,Contact your nearest

Sony dealer or local authorized Sony service facility and give the 5character service number. Example: E 61 10

Glossary

Album (page 48, 50)

A unit in which to store JPEG image files or MP3 audio tracks on a DATA CD/DATA DVD. (“Album” is an exclusive definition for this player.)

Chapter (page 11)

Sections of a picture or a music feature that are smaller than titles. A title is composed of several chapters. Depending on the disc, no chapters may be recorded.

Dolby Digital (page 21, 63)

Digital audio compression technology developed by Dolby Laboratories. This technology conforms to multi-channel surround sound. The rear channel is stereo and there is a discrete subwoofer channel in this format. Dolby Digital provides the same discrete channels of high quality digital audio found in “Dolby Digital” theater surround sound systems. Good channel separation is realized because all of the channel data is recorded discretely and little deterioration is realized because all channel data processing is digital.

DTS (page 21, 63)

Digital audio compression technology that Digital Theater Systems, Inc. developed. This technology conforms to multi-channel surround sound. The rear channel is stereo and there is a discrete subwoofer channel in this format. DTS provides the same discrete channels of high quality digital audio. Good channel separation is realized because all of the channel data is recorded discretely and little deterioration is realized because all channel data processing is digital.

Additional Information

DVD VIDEO (page 7)

A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. The data capacity of a single-layer and singlesided DVD is 4.7 GB (Giga Byte), which is 7 times that of a CD. The data capacity of a double-layer and single-sided DVD is 8.5 GB, a single-layer and double-sided DVD is

9.4 GB, and double-layer and double-sided DVD is 17 GB. The picture data uses the MPEG 2 format, a worldwide standard of digital compression technology. The picture data is compressed to about 1/40 (average) of its original size. The DVD also uses a variable rate coding technology that changes the data to be allocated according to the status of the picture. Audio information is recorded in a multi-channel format, such as Dolby Digital, allowing you to enjoy a more realistic audio presence. Furthermore, various advanced functions such as the multi-angle, multilingual, and Parental Control functions are provided with the DVD.

DVD-RW (page 7)

A DVD-RW is a recordable and rewritable disc that is the same size as a DVD VIDEO. The DVD-RW has two different modes: VR mode and Video mode. DVD-RWs created in Video mode have the same format as a DVD VIDEO, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited.

DVD+RW (page 7)

A DVD+RW (plus RW) is a recordable and rewritable disc. DVD+RWs use a recording format that is comparable to the DVD VIDEO format.

File (page 48, 51)

A JPEG image recorded on a DATA CD/ DATA DVD (“File” is an exclusive definition for this player.) A single file consist of a single image.

Film based software, Video based software (page 19)

DVDs can be classified as Film based or Video based software. Film based DVDs contain the same images (24 frames per second) that are shown at movie theaters. Video based DVDs, such as television dramas or sit-coms, displays images at 30 frames/60 fields per second.

Normal (Interlace) format (page 19)

Normal (Interlace) format shows every other line of an image as a single “field” and is the standard method for displaying images on television. The even number field shows the even numbered lines of an image, and the odd numbered field shows the odd numbered lines of an image.

Progressive format (page 19)

Compared to the Interlace format that alternately shows every other line of an image (field) to create one frame, the Progressive format shows the entire image at once as a single frame. This means that while the Interlace format can show 30 frames/60 fields in one second, the Progressive format can show 60 frames in one second. The overall picture quality increases and still images, text, and horizontal lines appear sharper. This player is compatible with the 480 progressive format.

Progressive JPEG

Progressive JPEGs are used mostly on the internet. They are different from other JPEGs in that they “fade in” gradually instead of being drawn from top to bottom when displayed on a browser. This lets you view the image while it is being downloaded.

Title (page 11)

The longest section of a picture or music feature on a DVD, movie, etc., in video software, or the entire album in audio software.

Specifications

System

Laser: Semiconductor laser Signal format system: NTSC

Audio characteristics

Frequency response: DVD VIDEO (PCM

96 kHz): 2 Hz to 44 kHz (±1.0 dB)/DVD VIDEO (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)/CD: 2 Hz to 20 kHz (±0.5 dB)

Signal-to-noise ratio (S/N ratio): 115 dB

(LINE OUT L/R (AUDIO) jacks only)

Harmonic distortion: 0.003 % Dynamic range: DVD VIDEO: 103 dB/

CD: 99 dB

Wow and flutter: Less than detected value

(±0.001% W PEAK)

Outputs

(Jack name: Jack type/Output level/Load

impedance)

LINE OUT (AUDIO): Phono jack/2 Vrms/

10 kilohms

DIGITAL OUT (COAXIAL): Phono jack/

0.5 Vp-p/75 ohms

COMPONENT VIDEO OUT(Y, P

Phono jack/Y: 1.0 Vp-p/P

interlace*

= 0.648 Vp-p, progressive or

= 0.7 Vp-p/75 ohms

interlace*

*1BLACK LEVEL (COMPONENT OUT) is ON

BLACK LEVEL (COMPONENT OUT) is OFF

LINE OUT (VIDEO): Phono jack/1.0 Vp-p/

75 ohms

S VIDEO OUT: 4-pin mini DIN/Y:

1.0 Vp-p, C: 0.286 Vp-p/75 ohms

, PR):

, PR:

,continued

General

Power requirements:

U.S./Canadian models: 120 V AC, 60 Hz Models for other areas: 110 -240 V AC, 50/60 Hz See page 5 for further information.

Power consumption: 10 W Dimensions (approx.):

430 × 43 × 237.2 mm (17 × 1 (width/height/depth) incl. projecting parts

Mass (approx.): 1.92 kg (4 Operating temperature: 5 °C to 35 °C

(41

F to 95°F)

Operating humidity: 25 % to 80 %

Supplied accessories

See page 16.

Specifications and design are subject to change without notice.

NERGY STARR is a U.S. registered mark.

NERGYSTARR Partner, Sony

As an Corporation has determined that this product meets the

NERGYSTARR guidelines for

energy efficiency.

× 9

in.)

lb)

Additional Information

1-16E

1-16

SECTION 2

DISASSEMBLY

Note: Follow the disassembly procedure in the numerical order given.

2-1. UPPER CASE

4 Tapping Screw

DVP-NS50P/NS41P/NS52P

3 Tray Cover

Chassis Back

2-2. FRONT PANEL ASSEMBLY

Claw

6 Three Screws (Screw, Tapping)

Tapping Screw

Front Panel Assembly

Claw

2-1

Claw

DVP-NS50P/NS41P/NS52P

2-3. LOADING ASSEMBLY

Three Screws

+BV3 (3-CR)

Loading Assembly

1 FMD-004 Flat Flexible Cable (CN101, 24P)

2 MD-108 Harness (CN201, 6P)

3 FMS-003 Flat Flexible Cable (CN202, 5P)

2-2

DVP-NS50P/NS41P/NS52P

2-4. OPTICAL PICK-UP

(DEVICE, OPTICAL KHM-310CAA/C2RP)

2 FFC Holder

3 Optical Device

(KHM-310CAA/C2RP)

Note:

Solder short land before remove the harness from 24 pin BU connector.

Shortland Position

6 Two Insulator

5 FMD-004 Flat Flexible Cable

(CN101, 24P)

6 Two Insulator

1 Four Insulator Screws

Caution Point on the Laser Diode:

Laser Diode in the optical Device is very sensitive to Surge Current or ElectroStatic Discharge (ESD):

After take-out FMD-004 Flexible cable from CN101 of MV-045 board immediately ground FMD-004 Flexible cable pattern using short clip. Metal paper clip can be used as short clip.

4 MD-108 Harness (CN201, 6P)

2-3

DVP-NS50P/NS41P/NS52P

2-5. MV-045 and IF124 BOARDS

2 MD-108 Harness (CN201, 6P)

3 FMS-003 Flat Flexible Cable (CN202, 5P)

Note: Caution Point on the PWB IF-124

When handling IF-124 PWB avoid contact with the sharp metal edge on the top side of Vacuum Fluorescent Display (ND401).

5 FMD-004 Flat Flexible Cable (CN101, 24P)

6 Five Screws +BV3 (3-CR)

7 MV-045 Board

1 Three Screws

+BV3 (3-CR)

8 IF-124 Board

2-6. SWITCHING REGULATOR

1 Connector (PM-119 Harness, CN201, 10P)

2 Two Screws +BV3 (3-CR)

4 (Board to Board) Connector (CN401, 17P)

6 Two Screws +BV3 (3-CR)

3 Power Board

2-4

+ 54 hidden pages