To prevent f ire or shoc k hazard,
do not expose th e unit to rain or
moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing
to qualified personnel only.
CAUTION
The use of optical instruments with
this product will increase eye
hazard. As the laser beam used in
this CD/DVD player is harmful to
eyes, do not attempt to disassemble
the cabinet.
Refer servicing to qualified
personnel only.
This symbol is intended
to alert the user to the
presence of uninsulated
“dangerous voltage”
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
instructions in the literature
accompanying the appliance.
within the product’s
This symbol is intended
to alert the user to the
presence of important
operating and
maintenance (servicing)
CAUTION
TO PREVENT ELECTRIC SHOCK
MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
For custom ers in the U.S.A
Owner’s Record
The model and serial numbers are
located at the rear of the unit. Record
the serial number in the space
provided below. Refer to them
whenever you call upon your Sony
dealer regarding this product.
Model No. DVP-NS300
Serial No.______________
CAUTION
You are cautioned that any change or
modifications not expressly approved
in this manual could void your
authority to operate this equipment.
Note
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
Part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against
harmful interference in a residential
installation. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between
the equipment and receiver.
- Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
- Consult the dealer or an
experienced radio/TV technician
for help.
Thank you for purchasing this Sony
CD/DVD Player. Before operating
the player, please read this manual
thoroughly and retain it for future
reference.
2
Precautions
On safety
• The power requirements and power consumption
of this player are indicated on the back of the
player. Chec k that th e player ’s operating voltage
is identical with your loca l power suppl y.
X
MODEL NO.
DVP–XXXX
CD/DVD PLAYER
Power requirements and
power consumpt ion t
• Caution – The use of optical instruments with
this product wil l increase eye hazard .
• Should any solid object or liqu id fall into the
cabinet, unplug the player and have it checked by
qualified personnel befo re operating it any
further.
On power sources
• The player is not discon nected from the AC po wer
source as long as it is connected to the wall outlet,
even if the player itself has been turned off.
• If you are not going to use the player for a long
time, be sure to disconnect the pl ayer from the
wall outlet. To disconnect the AC power cord,
grasp the plug itself; never pull the cord.
• Should the AC power cord ne ed to be changed,
have it done at a qualified serv ic e shop only.
On placement
• Place the play er in a location with adequate
ventilation to prevent heat build-up in the player.
• Do not place the player on a soft surface such as
a rug that mi ght bloc k the ve ntilatio n holes on the
bottom.
• Do not place the pl ayer in a location near heat
sources, or in a place subject to di re ct sunlight,
excessive dust, or mechanical shock.
AC 00V 00Hz
00W
SONY CORPORATION
NO.
MADE IN JAPAN
0-000-000-00
On adjusting volume
Do not turn up the volume while listening to a
section with very low level inputs or no audio
signals. If you do, the speakers may be damaged
when a peak level section is played.
On cleaning
Clean the cabinet, panel, and controls with a soft
cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol or
benzine.
If you have any questions or problems concerning
your player, please co nsul t your nearest Sony
dealer.
On cleaning discs
Do not use a commercially available CD/DVD
cleaning disc. It may cause a malfunction.
IMPORTANT NOTICE
Caution: The enclosed DVD player is capable
of holding a still video image or on- screen
display image on your television scree n
indefinitely. If you leave the still video i ma ge
or on-screen display image displa ye d on your
TV for an extended period of time yo u risk
permanent damage to your telev ision screen.
Projection televisions are especially
susceptible to this.
For the model supplied with the AC
plug adaptor
If the AC plug of your unit does not fit into the wall
outlet, attach t h e s upplied AC plug adaptor.
On operation
• If the player is brought directly from a cold to a
warm locat ion, or i s p lace d in a ve ry da mp r oom,
moisture may condense on the lenses inside the
player. Should this occur, the play e r m ay not
operate properly. In this case, remove the disc
and leave the player turned on for about half an
hour until the moisture evaporates.
• When you move the player, take out any discs. If
controls on the remote. You can also use the
controls on the player if they have the same
or similar name s as tho s e on the remote.
•The icon s used in this manual are describe d
below:
IconMeaningIconMeaning
z
Functions
available in
music CD
mode
More
convenient
features
Functions
available in
DVD video
mode
Functions
available in
VIDEO CD
mode
Region code
Your DVD player has a region code printed
on the back of the unit and will only play
DVDs labeled with identical region codes.
DVDs labeled will also play on this
ALL
player.
If you try to play any other DVD, the
message “Playback prohibited by area
limitations.” will appear on the TV screen.
Depending on the DVD, no regi on code
indication may be labeled even though
playing the DVD is prohibited by area
restrictions.
Region code
X
MODEL NO.
DVP–XXXX
CD/DVD PLAYER
AC 00V 00Hz
NO.
00W
SONY CORPORATION
MADE IN JAPAN
0-000-000-00
Example of discs that the player
cannot play
This Player Can Play the
Following Discs
Format of discs
DVD VIDEO
VIDEO CD
Music CD
The “DVD VIDEO” logo is a trademark.
The player cannot play the follo win g di scs:
•CD-ROMs (PHOTO CDs included)
•CD-Rs
•Data part of CD-Extras
•DVD-ROMs
•DVD Audio discs
•HD layer on SACDs
Also, the player cannot play the following
discs:
•A DVD with a different region code (page
64).
•A disc recorded in a color system other than
NTSC, such as PAL or SECAM. (This
player conforms to the NTSC color
system.)
•A disc that has a non-standard shape (e.g.,
card, heart).
•A disc with paper or stickers on it.
•A disc that has the adhesive of cellophane
tape or a sticker still left on it.
6
Note on playback operations of
DVDs and VIDEO CDs
Notes about the Discs
Some playback operations of DVDs and
VIDEO CDs may be intentionally set by
software producers. Since this player pl ays
DVDs and VIDEO CDs according to the disc
contents the software producers designed,
some playback features may not be available.
Also, ref er to the instructions supplied with
the DVDs or VIDEO CDs.
Copyrights
This product incorporates copyright
protection tech nology that is prot ected by
method claims of cert ain U.S. patents, other
intellectual property rights owned by
Macrovision Corporation, and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended for
home and other limited viewin g us e s only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
On handling discs
•To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
•Do not expose the disc to direct sunlight or
heat sources such as hot air duc ts, or leave
it in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
•After playing, store the disc in its case.
On cleaning
•Before playing, clean the disc with a
cleaning cloth.
Wipe the disc from the center out.
•Do not use solvents such as benzine,
thinner, commercially available cl eaners, or
anti-static spray intended for vinyl LPs.
7
Index to Parts and Controls
For more information, refer to the pages indicated in parentheses.
Front Panel
1 POWER switch/indicator (28)
2 BNR (Block Noise Reduction) button/
indicator (46)
3 SURROUND button/indicator (43)
4 Disc tray (28)
5 A (open/close) button (28)
6 ./> (previous/next) buttons ( 29)
7 C/X/x/c/ENTER buttons (24)
8 TITLE button (31)
9 DVD MENU button (31)
q; O RETURN button (32)
qa DISPLAY butto n (12 )
qs x (stop) button (28)
qd X (pause) button (29, 52)
qf H (play) button (28)
qg Front panel display (9)
qh (remote sensor) (14)
8
Front Panel Display
When playing back a DVD
Playing
Disc type
status
Current chapter (39)
DVD
DTS ANGLE REPEAT1
Current audio
signal (59)
PGM SHUFFLE
Digital
A-B
Current play
mode (33)
TITLECHAPHOURMIN
Current title (39)
Lights up when you can change
the angle (45)
When playing back a VIDEO CD (PBC)
Playing
Disc type
status
VIDEO CD
CD
Current play mode (33)
A-B
PBC
Current scene (39)
Lights up when playing back a VIDEO CD with PBC (32)
When playing back a CD or VIDEO CD (without PBC)
Playing
status
VIDEO CD
CD
PGM SHUFFLE
REPEAT1
A-B
TRACKINDEXMIN
Playing time (39)
MIN
Playing time (39)
SEC
SEC
SEC
Disc type
Current play mode
(33)
Current track and
index (39)
Playing time (39)
continued
9
Rear Panel
DIGITAL OUTLINE OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
OPTICAL
R-AUDIO 1-L VIDEO 1
R-AUDIO 2-L VIDEO 2
S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
B
P
P
R
1 DIGITAL OUT (COAXIAL) jack (21,
22, 23)
2 DIGITAL OUT (OPTICAL) jack (21,
22, 23)
3 LINE OUT L/R (AUDIO) 1/2 jacks (20,
21, 22)
4 LINE OUT (VIDEO) 1/2 jacks (17)
5 S VIDEO OUT jack (17)
6 COMPONENT VIDEO OUT jacks (17)
3 SURROUND button (43)
4 TIME/TEXT button (39)
5 REPEAT button (35)
6 SHUFFLE button (35)
7 PROGRAM button (35)
8 ANGLE button (45)
9 AUDIO button (42)
q; ./> PREV/NEXT buttons (29)
qa/ y SCAN/SLOW buttons (37)
qs H PLAY button (28)
qd X PAUSE button (28)
qf TITLE button (31)
qg DISPLAY button (54)
qh TV [/1 (on/standby) button (53)
qj ]/1 (on/st andby) button (53)
qk SETUP button (54)
ql A - B button (36)
w; TV/VIDEO button (53)
wa VOL +/– button (53)
ws CLEAR button (33)
wd SUBTITLE button (45)
wf SEARCH MODE button (38)
wg INSTANT REPLAY button (53)
wh x STOP button (28)
wj DVD MENU button (31)
wk C/X/x/c buttons (24)
wl ENTER button
e; O RETURN button (32)
11
Guide to On-Screen Displays (Status Bar, Control Bar, Control Menu)
DVD T41 – 8 T 0:08:41
3/2.1
The following explains the three type of on-screen displays used with this player:
Status Bar, and Control Bar, and Control Menu.
Status Bar
Displays the current playing st atus
This display appears when the DISPLAY button is pressed repeatedly during playback.
The numbers in parentheses indicate reference pages.
Chapter number of
the DVD or the index
Type of disc being
played back.
number of the VIDEO
CD or CD (64).
Playback status
(BPlayback, XPause, xStop, etc.).
Title number of
the DVD or the
track number of
the VIDEO CD
or CD (64).
(DVD playback only)
DOLBY DIGITAL
Format of the current audio
signal (42).
Lights up in gr een duri ng Shuffl e Play (35 ).
Lights up in
green during
Program
Play (33).
Lights up in green during
Repeat Play (35).
Playing time or
remaining time
(39).
Unit being repeated.
CHAPTER
Example of when
Repeat Play is
selected. The display
will differ when A-B
Repeat Play is set.
12
Control Bar
2(7
)
The Control Bar appears when a playback function is selected by pressing the function’s bu tto n
on the remote.
Playback function icon.
Lights up in green
when a playback
function is selected.
Selected item or unit.
Example of when
ANGLE is press ed
on the remote.
Control Menu
The Control Menu appears when the DISPLAY button is pressed when the player is in stop mode.
The number in parenthesis indicate reference pages.
SETUP (54)
• Select QUICK to make the minimum number of basic
adjustments to use the player.
• Select CUSTOM to make a full range of adjustments.
• Select RESET to return the adjustments to the default settings.
QUICK
Lights up in green during
Program Play.
CUSTOM
PARENTAL CONTROL (47)
• Set this to limit the
playback of selected
discs.
PROGRAM (33)
• Allows you to play titles,
chapters or tracks in any
order you want.
13
Getting Started
Quick Overview
A quick overview presented in this chapter will give you enough information to start using the
player for your enjoyment. To use the surround sound features of this player, refer to “Hookups”
on page 17.
Note
You cannot connect this player to a TV that does not have a video input jack.
Be sure to turn off the power of ea c h component before connecting.
Step 1: Unpacking
Check that you have the following items:
•Audio/video cord (pinplug × 3 y pinplug × 3) (1)
•Remote commander (remote) RMT-D126A (1)
•Size AA (R6) batteries (2)
•A plug adaptor is included with some models.
Step 2: Inserting Batteries into the Remote
You can control the player using the supplied remote. Insert two size AA (R6) batteries by
matching the 3 and # ends on the batteri es to the markings i nside the comp artment. When using
the remote, point it at the remote sensor on the player.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the rem ote se nsor to dir e c t light from the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an ex te nde d pe r iod of time, remove the batteries to avoid possible damage from
battery leakage and corros ion .
14
Step 3: TV Hookups
Connect the supplie d audio/video cord and power cord in the order (1~3) shown below. Be
sure to connect the power cord last.
1 Audio/video
cord (supplied)
to VIDEO INPUT
to AUDIO INPUT
INPUT
AUDIO
VIDEO
L
R
(yellow)
(white)
(red)
TV
Getting Started
(AUDIO) 1
to LINE OUT (VIDEO) 1to LINE OUT L/R
LINE OUT
R-AUDIO 1-L VIDEO 1
R-AUDIO 2-L VIDEO 2
CD/DVD Player
S VIDEO
DIGITAL OUTLINE OUT
PCM/DTS/
DOLBY DIGITAL
R-AUDIO 1-L VIDEO 1
COAXIAL
OPTICAL
R-AUDIO 2-L VIDEO 2
COMPONENT
VIDEO OUT
OUT
Y
P
B
P
R
l: Signal flow
When connecting to a wide screen TV
Depending on the di sc, the image may not f it your TV screen.
If you want to change the aspect ratio, please refer to page 56.
2 Power source
3 Power source
15
Step 4: Playing a Disc
1 Turn on the TV.
2 Switch the input selector on the TV to the player.
With the playback side facing down
3 Press POWER on the player.
4 Press A on the player to open the disc tray.
5 Place the disc on the tray with the playback side facing down.
6 Press H.
The disc tray closes and the player begins playing t he disc.
After Step 6
Depending on the disc, a m enu may b e displaye d on the TV screen . If so, sele ct the i tem you wa nt
from the menu and play the DVD (page 31) or VIDEO CD disc (page 32).
To stop playing
Press x.
To take out the disc
Press A.
To turn off the player
Press ^/1 on the remote. The pla y er is set to stan db y m od e an d th e power ind ic ator lights up in
red. Press POWER on the player to turn off completely.
16
Hookups
Hooking Up the Play er
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (pag e 14).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cord s
Connect your CD/DVD player to your TV monitor, projector, or AV amplifier (receiver) using a
video cord. Select on e of the patterns A throug h C, according to the input jack on your TV
monitor, projector, or AV amplifier (receiver).
Hookups
A
INPUT
VIDEO
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
DIGITAL OUTLINE OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
OPTICAL
INPUT
S VIDEO
TV, projector, or AV
B
amplifier (receiver)
R-AUDIO 1-L VIDEO 1
R-AUDIO 2-L VIDEO 2
(yellow)
Audio/video cord
(supplied)
(yellow)
S VIDEO
COMPONENT
VIDEO OUT
OUT
Y
B
P
P
R
S VIDEO cord (not supplied)
Component video
cord (not supplied)
COMPONENT
VIDEO IN
Y
P
B
P
R
TV, projector, or AV
amplifier (receiver)
CD/DVD player
C
l : Signal flow
continued
17
A If you are connecting to a video input jack
)
Connect the yellow plug of the audio /video co rd (supplied) to the yellow (v ideo) jacks. Yo u will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Yellow (Video
White (L)
Red (R)
Use the red and white plugs to co nnect to the audio input jacks (page 19).
B If you are co nnecting to an S VIDEO input jac k
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a mon itor, projector, or A V am plifier (r eceiver) ha ving
component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord
(not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy
accurate color reproduction and high qua lity images .
B, PR)
Note
Do not connect your player to a VCR. You may not receive a cle ar image on the TV screen if you pass the player
signals via the VCR.
VCR
CD/DVD player
Connect directly
TV
18
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection th at best suits your system . The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Hookups
Select one of the following connecti on s, through .
ConnectionComponents to be connected
(page 20)
A
(page 21)
B
(page 21)
B
(page 22)
C
(page 23)
D
* Manufactured under license from Dolby L abo rat o rie s. “Dol by,” “Pro Logic,” and the double-D symbol are
** “DTS” is a registered trademark of Digital Theater Systems, Inc.
• TV (stereo)
• Stereo amplif ie r (receiver)
(having L and R audio input jacks only, or havin g a dig ital input ja ck)
• 2 speakers
(front L and R)
• MD deck/DAT deck
• AV amplifier (receiver) with a Dolby
(having L and R audio input jacks only, or havin g a dig ital input ja ck)
• 3 speakers
(front L and R, and rear (monaural))
• 6 speakers
(front L and R, center, rear L and R, and subwoofer)
• AV amplifier (receiver) having a Dolby Digital or DTS
input jack
• 6 speakers
(front L and R, rear L and R, ce nt er, and subwoofer)
AD
*
Surround (Pro Logic) deco de r
**
decoder and a digital
continued
19
A
Connecting to your TV
This connection will use your TV speakers for sound.
xReco mmended surround sound effects for this connection
•TVS DYNAMIC (page 43)
•TVS WIDE (page 43)
CD/DVD player
S VIDEO
DIGITAL OUTLINE OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
OPTICAL
R-AUDIO 1-L VIDEO 1
R-AUDIO 2-L VIDEO 2
OUT
COMPONENT
VIDEO OUT
Y
P
B
P
R
A
LINE OUT
R-AUDIO 1-L VIDEO 1
(yellow)
(white)
(yellow)
(white)
TV
(red)
Audio/video cord
R-AUDIO 2-L VIDEO 2
(supplied)
l : Signal flow
The yellow plug is used for vid e o sig n als (page 17).
(red)
to audio input
20
B
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
This connection will use your 2 front speak ers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the
amplifier (receiver) has a digital input jack, use . When connecting to an MD deck or a DAT
deck, use . In this case, you can also connect the player directly to the MD deck or DAT
B-2
B-2
deck without using your stereo amplifier (receiver).
xRecommended surround sound effects for the connection only
B-1
•TVS STANDARD (page 43)
B-1
Hookups
z
In connection, you can use the supplied audio/video cord instead of usi ng a separ a te audi o co rd .
B-1
z To realize better surround sound effects, make sure that your listening position is in between your spe aker s.
Note
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the connection.
CD/DVD player
S VIDEO
DIGITAL OUTLINE OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
OPTICAL
R-AUDIO 1-L VIDEO 1
R-AUDIO 2-L VIDEO 2
OUT
COMPONENT
VIDEO OUT
Y
B
P
P
R
B-2
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
OPTICAL
Coaxial digital
cord (not supplied)
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital inputto audio input
Stereo audio cord
(not supplied)
or
(white)(red)
(white)
(red)
B-2
B-1
LINE OUT
VIDEO 1
R-AUDIO 1-L
R-AUDIO 2-L VIDEO 2
[Speakers]
Front
(L)
Front
(R)
l: Signal flow
Stereo amplifier (receiver)
MD deck/DAT deck
continued
21
C
Connecting to a Dolby Sur round ( Pro Logic) d ecoder a mplifier (receiver) and
3 to 6 speakers
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital, or
DTS decoder, refer to page 23.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multichannel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has R and L a udio input jacks onl y, use . If your amplifier
(receiver) has a digital input jack, use .
C-2
xReco mmended surround sound effects using this connection with your amplifier (receiver)
•Dolby Surround (Pro Logic) (page 64)
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
z
CD/DVD player
S VIDEO
DIGITAL OUTLINE OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
OPTICAL
R-AUDIO 1-L VIDEO 1
R-AUDIO 2-L VIDEO 2
OUT
COMPONENT
VIDEO OUT
Y
B
P
P
R
C-1
22
C-2
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
OPTICAL
Coaxial digital cord
(not supplied)
or
Stereo audio cord
(not supplied)
or
(white)
(red)
C-1
LINE OUT
VIDEO 1
R-AUDIO 1-L
R-AUDIO 2-L VIDEO 2
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital input
[Speakers]
(white)
(red)
to audio input
[Speakers]
Dolby Surround amplifier (receiver)
Rear*
(mono)
Front
(L)
Rear
(L)
Rear
(R)
Subwoofer
center
l: Signal flow
∗When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
subwoofer.
Front
(R)
Loading...
+ 50 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.