Sony DVPNS-28, DVPNS-38, DVPNS-39, DVPNS-47-P, DVPNS-57-P Service manual

...

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

RMT-D175A/RMT-D175P

AEP Model

SERVICE MANUAL

Argentina Model

New Zealand Model

Brazilian Model

Canadian Model

RMT-D175A

DVP-NS38/NS39

Australian/

DVP-NS57P/NS67P

DVP-NS64P/NS67P

E Model

India Model

DVP-NS57P/NS67P

Iran Model

Korea Model

RMT-D175P

Photo : DVP-NS28/NS38/NS39/NS47P/NS57P

RMT-D175P/D175A

Photo : DVP-NS64P/NS67P

RMT-D175P/D175A

Malaysia Model

Mexican Model

DVP-NS57P

Middle East Model

DVP-NS57P/NS67P

Pakistan,

Morocco Model

PX Model

DVP-NS57P

Saudi Arabia Model

Singapore Model

Taiwan Model

DVP-NS57P/NS67P

Thailand Model

DVP-NS57P

US Model

DVP-NS47P/NS57P

Notes: Australia/NZ model only

CD/DVD PLAYER

Russian Model

DVP-NS28/NS38

Vietnam Model

DVP-NS57P

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

SPECIFICATIONS

System

Laser: Semiconductor laser Signal format system:

PAL/NTSC (DVP-NS28/NS38/NS39/ NS57P: EXCEPT US, PX, MX, E, BR, AR/NS67P: SP, TH, TW, ME2, AUS, IN, EA) NTSC (DVP-NS47P/NS57P:US, PX, MX, E, BR, AR/NS64P/NS67P:CND, E, AR, BR)

Audio characteristics

Frequency response:

DVD VIDEO (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)/ CD: 2 Hz to 20 kHz (±0.5 dB)

Harmonic distortion: 0.01% Dynamic range: DVD VIDEO: 85 dB/

CD: 85 dB

Wow and flutter: Less than detected value

(±0.001% W PEAK)

Outputs

(Jack name: Jack type/Output level/

Load impedance)

LINE OUT (AUDIO)

EXCEPT (DVP-NS38:AEP/NS39)

Phono jack/2 Vrms/ 10 kilohms

DIGITAL OUT (OPTICAL)

(DVP-NS57P:EXCEPT US, MX, E/ NS67P:EXCEPT E, CND):

Optical output jack/–18 dBm (wave length 660nm)

DIGITAL OUT (COAXIAL):

Phono jack/ 0.5 Vp-p/75 ohms

COMPONENT VIDEO OUT

(Y, PB/CB, PR/CR ) (DVP-NS57P:EXCEPT US, MX, E, PX, BR, AR/NS67P:EXCEPT E, CND, BR, AR):

Phono jack/Y: 1.0 Vp-p, PB/CB, PR/CR: 0.7 Vp-p/75 ohms

COMPONENT VIDEO OUT

(Y, PB, PR) (DVP-NS47P:US/ NS57P:US, MX, E, PX, BR, AR/ NS64P:CND/NS67P:E, CND, BR, AR):

Phono jack/Y: 1.0 Vp-p/PB, PR: interlace*1 = 0.648 Vp-p, progressive or interlace*2 = 0.7 Vp-p/75 ohms

BLACK LEVEL (COMPONENT OUT) is ON

BLACK LEVEL (COMPONENT OUT) is OFF

LINE OUT (VIDEO)

EXCEPT (DVP-NS38:AEP/NS39)

Phono jack/1.0 Vp-p/75 ohms

LINE (RGB)-TV

(DVP-NS28/NS38:AEP, RUS/NS39)

(AUDIO): SCART jack/2 Vrms/10 kilohms (VIDEO): SCART jack/1.0 Vp-p/75 ohms (S VIDEO): SCART jack/Y: 1.0 Vp-p, C: 0.3 Vp-p (PAL),

0.286 Vp-p (NTSC)/75 ohms (RGB): SCART jack/0.7 Vp-p/75 ohms

General

Power requirements:

220 – 240 V AC, 50/60 Hz (DVP-NS28/NS38/NS39) 120 V AC, 60 Hz (DVP-NS47P: US/NS57P:US, MX/ NS64P:CND/NS67P:CND) 110 V AC, 60 Hz (DVP-NS57P:TW/NS67P:TW) 110 – 240 V AC, 50/60 Hz (EXCEPT models mentioned above)

Power consumption:

8W (DVP-NS28/NS38/NS39) 9W (DVP-NS47P/NS57P/NS64P/NS67P)

Dimensions (approx.):

430 × 43 × 206.5 mm (width/height/depth) incl. projecting parts

Mass (approx.): 1.70 kg Operating temperature: 5°C to 35°C Operating humidity: 25% to 80%

Supplied accessories

See page 14. (IM section)

Specifications and design are subject to change without notice.

ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, Sony Corporation has determined that this product meets the ENERGY STAR

guidelines for energy efficiency. (DVP-NS57P: AUS/NS67P: AUS ONLY)

(DVP-NS57P: AUS/NS67P: AUS)

– 2 –

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer:

1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.

2. Check the interboard wiring to ensure that no wires are “pinched” or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.

4. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

5. Check the line cord for cracks and abrasion. Recommend the replacement of any such line cord to the customer.

6. Check the B+ voltage to see it is at the values specified.

7. Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below.

To Exposed Metal

Parts on Set

0.15 F

Fig.A. Using an Acvoltmeter to check AC leakage.

WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.

1.5k

Earth Ground

WARNING!!

Voltmeter (0.75 V)

CAUTION:

The use of optical instrument with this product will increase eye hazard.

LEAKAGE TEST

The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5mA (500 microampers). Leakage current can be measured by any one of three methods.

1. A commercial leakage tester, such as the Simpson 229 or RCA TW-540A. Follow the manufacturers’ instructions to use these instruments.

2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC volmeter. The “limit” indication is 0.75V, so analog meters must have an accurate low voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. (See Fig. A)

Unleaded solder

Boards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)

: LEAD FREE MARK

Unleaded solder has the following characteristics.

• Unleaded solder melts at a temperature about 40°C highter than

ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350°C Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful!

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK OR DOTTED LINE WITH MARK ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!

LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

– 3 –

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

TABLE OF CONTENTS

SERVICE NOTE

1. Disc Removal Procedure (at POWER OFF) ..................... 6E

2. Child Lock ............................................................................. 6E

3. Tray Lock.............................................................................. 6E

1. GENERAL

WARNING............................................................................ 1-1

Notes About the Discs ........................................................ 1-1

Precautions.......................................................................... 1-1

About This Manual ............................................................... 1-1

This Player Can Play the Following Discs......................... 1-1

Index to Parts and Controls ............................................... 1-2

Guide to the Control Menu Display .................................... 1-3

Hookups ...................................................................................... 1-3

Hooking Up the Player ........................................................ 1-3

Step 1: Unpacking ............................................................... 1-3

Step 2: Inserting Batteries into the Remote ....................... 1-3

Step 3: Connecting the Video Cords .................................. 1-4

Step 4: Connecting the Audio Cords .................................. 1-4

Step 5: Connecting the Power Cord ................................... 1-5

Step 6: Quick Setup ............................................................ 1-5

Playing Discs............................................................................... 1-5

Playing Discs ....................................................................... 1-5

Resuming Playback From the Point Where You

Stopped the Disc (Multi-disc Resume) ........................ 1-6

Using the DVD's Menu ........................................................ 1-6

Selecting “ORIGINAL” or “PLAY LIST” in

DVD-VR mode ................................................................ 1-6

Playing VIDEO CD's With PBC Functions

(PBC Playback) .............................................................. 1-6

Various Play Mode Functions (Programme Play,

Shuffle Play, Repeat Play, A-B Repeat Play) ............... 1-6

Searching for a Scene ................................................................ 1-8

Searching for a Particular Point on a Disc

(Scan, Slow-motion Play, Freeze Frame) .................... 1-8

Searching for a Title/Chapter/Track/Scene, etc................ 1-8

Searching by Scene (PICTURE NAVIGATION) ............... 1-8

Viewing Information About the Disc ........................................... 1-9

Checking the Playing Time and Remaining Time .............. 1-9

Sound Adjustments ..................................................................... 1-9

Changing the Sound............................................................ 1-9

TV Virtual Surround Settings (TVS) ................................. 1-10

Enjoying Movies ........................................................................ 1-10

Changing the Angles ......................................................... 1-10

Displaying the Subtitles..................................................... 1-10

Adjusting the Playback Picture

(CUSTOM PICTURE MODE) ..................................... 1-10

Sharpening the Picture (SHARPNESS)........................... 1-11

Enjoying MP3 Audio and JPEG Images .................................. 1-11

About MP3 Audio Tracks and JPEG Image Files ........... 1-11

Playing MP3 Audio Tracks and JPEG Image Files ......... 1-11

Enjoying JPEG Images as a Slide Show ......................... 1-12

Enjoying DivX® Videos ............................................................... 1-13

About DivX Video Files ...................................................... 1-13

Playing DivX Video Files ................................................... 1-13

Using Various Additional Functions.......................................... 1-14

Locking Discs (CUSTOM PARENTAL CONTROL,

PARENTAL CONTROL) .............................................. 1-14

Controlling Your TV with the Supplied Remote ................. 1-14

Settings and Adjustments......................................................... 1-15

Using the Setup Display ................................................... 1-15

Setting the Display or Sound Track Language

(LANGUAGE SETUP) ................................................. 1-15

Settings for the Display (SCREEN SETUP) .................... 1-15

Custom Settings (CUSTOM SETUP) .............................. 1-16

Settings for the Sound (AUDIO SETUP) ......................... 1-16

Additional Information ................................................................ 1-16

Troubleshooting ................................................................. 1-16

Self-diagnosis Function (When letters/

numbers appear in the display) .................................. 1-17

Glossary ............................................................................ 1-17

Specifications................................................................... 1-18E

2. DISASSEMBLY

2-1. Upper Case ......................................................................... 2-1

2-2. Front Panel Assembly ......................................................... 2-1

2-3. Loading Assembly ............................................................... 2-2

2-4. Optical Pick-Up

(Device, Optical KHM-313CAA/C2RP) ........................ 2-3

2-5. Rear Panel, MV-52/53/54 Board and IF-150 Board .......... 2-4

2-6. Switching Regulator ............................................................ 2-7

2-7. Internal Views ....................................................................... 2-8

2-8. Circuit Boards Location..................................................... 2-9E

3. BLOCK DIAGRAMS

3-1. Overall Block Diagram ........................................................ 3-1

3-2. Power Line Block Diagram ................................................. 3-3

3-3. System Control/Signal Processor (1) Block Diagram ...... 3-5

3-4. System Control/Signal Processor (2) Block Diagram ...... 3-7

3-5. RF/Servo Block Diagram .................................................... 3-9

3-6. Video (1) Block Diagram ................................................... 3-11

3-7. Video (2) Block Diagram ................................................... 3-13

3-8. Audio (1) Block Diagram ................................................... 3-15

3-9. Audio (2) Block Diagram ................................................... 3-17

3-10. Interface Control Block Diagram ...................................... 3-19

4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS

4-1. Frame Schematic Diagram ................................................. 4-1

4-2. Printed Wiring Boards and Schematic Diagrams .............. 4-3

• Waveforms

MV-52/53/54 Board ........................................................ 4-4

• IF-150 Printed Wiring Board .......................................... 4-5

• IF-150 (Interface) Schematic Diagram ........................ 4-7

• MV-52 Printed Wiring Board .......................................... 4-9

• MV-53 Printed Wiring Board ........................................ 4-11

• MV-52/53 (System) Schematic Diagram .................... 4-13

• MV-52/53 (Drive) Schematic Diagram ........................ 4-15

• MV-52 (Video) Schematic Diagram ............................. 4-17

• MV-53 (Video) Schematic Diagram ............................. 4-19

• MV-52 (Audio) Schematic Diagram ............................. 4-21

• MV-53 (Audio) Schematic Diagram ............................. 4-23

• MV-52/53 (Power) Schematic Diagram ...................... 4-25

• MV-54 Printed Wiring Board ........................................ 4-27

• MV-54 (System) Schematic Diagram ......................... 4-29

• MV-54 (Drive) Schematic Diagram ............................. 4-31

• MV-54 (Video) Schematic Diagram ............................. 4-33

• MV-54 (Audio) Schematic Diagram ............................. 4-35

• MV-54 (Power) Schematic Diagram ............................ 4-37

• Power Block (SRV1872WW) Printed Wiring Board .... 4-39

• Power Block (SRV1872WW) Schematic Diagram ..... 4-41

• Power Block (SRV1873UC) Printed Wiring Board ..... 4-43

• Power Block (SRV1873UC) Schematic Diagram ....... 4-45

5. IC PIN FUNCTION DESCRIPTION

5-1. System Control Pin Function

(MV-52/53 Boards IC101)

Except (DVP-NS47P/NS57P) ............................................. 5-1

5-1. System Control Pin Function

(MV-54 Boards IC101)

(DVP-NS47P/NS57P ONLY) ............................................... 5-6

– 4 –

6. TEST MODE

6-1. Executing IOP Measurement ............................................. 6-1

6-2. Emergency History Check ................................................. 6-1

6-3. Initializing Setup Data .......................................................... 6-2

6-4. Version Information ............................................................. 6-3

6-5. If Con Self Diagnostic Function .......................................... 6-3

7. ELECTRICAL ADJUSTMENT

7-1. Power Supply Output Voltage Check ................................. 7-1

7-2. Adjustment of Video System (DVP-NS28/NS38/NS39) ... 7-2 7-3. Adjustment of Video System

Except (DVP-NS28/NS38/NS39) ....................................... 7-4

8. REPAIR PARTS LIST

8-1. Exploded Views ................................................................... 8-1

8-1-1. Main Section ................................................................... 8-1

8-1-2. Mechanism Deck Assembly .......................................... 8-7

8-2. Electrical Parts List ............................................................. 8-8

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

– 5 –

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

SERVICE NOTE

1. DISC REMOVAL PROCEDURE (at POWER OFF)

1) Open dust cover to access to a hole insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck can in the direction of the arrow A. (See Fig. 1)

2) Draw out the tray in the direction of the arrow B, and remove a disc. (See Fig. 1)

3) After removing the disc, push in the direction of arrow C until the tray fully in.

4) Move the lever of chuck cam in the direction of arrow D.

The lever of a chuck cam

Tray

Hole

Fig. 1.

2. TRAY LOCK DISABLED PROCEDURE

When "TRAY LOCKED" appears on the front panel display, Tray Lock is activated. In order to disable it, press and hold x STOP, H PLAY and A EJECT on the player during standby mode. The player turns on and "TRAY UNLOCKED" appears on the front panel display.

Note: i. Tray Lock is set when you press x STOP, H PLAY and A EJECT on the player during standby mode. ii. Tray Lock can not be disabled by just disconnecting the player from the wall outlet (AC power source). iii. The A and Z buttons on the player or the remote do not work while the Tray Lock is set.

3. CHILD LOCK DISABLED PROCEDURE

When "LOCKED" appears on the front panel display, Child Lock is activated. In order to disable it, either

1) Press O RETURN, ENTER and then ?/1 on the remote when the player is in standby mode. The player turns on and "UNLOCKED" appears on the front panel display; or

2) Disconnect the player from the wall outlet (AC power source).

Note: i. Child Lock is set when you press O RETURN, ENTER, and then ?/1 on the remote during player in standby mode. ii. The A and Z buttons on the player or the remote do not work while the Child Lock is set.

– 6 –

– 6E –

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

The AC power cord must be changed only at a qualified service shop.

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

Not

Notes About the Discs

• To keep the disc clean, handle the disc by its edge. Do not touch the surface. Dust, fingerprints, or scratches on the disc may cause it to malfunction.

• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.

• After playing, store the disc in its case.

• Clean the disc with a cleaning cloth. Wipe the disc from the center out.

• Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs.

• If you have printed the disc’s label, dry the label before playing.

SECTION 1

GENERAL

Precautions

On safety

• To prevent fire or shock hazard, do not

• Should any solid object or liquid fall into

On power sources

• The player is not disconnected from the AC

• If you are not going to use the player for a

On placement

• Place the player in a location with adequate

• Do not place the player on a soft surface

• Do not place the player in a location near

• Do not install the player in an inclined

• Keep the player and the discs away from

• Do not place heavy objects on the player.

On operation

• If the player is brought directly from a cold

• When you move the player, take out any

This section is extracted from instruction manual. 2-895-893-11

place objects filled with liquids, such as vases, on the apparatus.

the cabinet, unplug the player and have it checked by qualified personnel before operating it any further.

power source as long as it is connected to the wall outlet, even if the player itself has been turned off.

long time, be sure to disconnect the player from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord.

ventilation to prevent heat build-up in the player.

such as a rug.

heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.

position. It is designed to be operated in a horizontal position only.

equipment with strong magnets, such as microwave ovens, or large loudspeakers.

to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates.

discs. If you don’t, the disc may be damaged.

On adjusting volume

Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

On cleaning discs, disc/lens cleaners

Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction.

On replacement of parts

In the event that this unit is repaired, repaired parts may be collected for reuse or recycling purposes.

IMPORTANT NOTICE

Caution: This player is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Plasma display panel televisions and projection televisions are susceptible to this.

If you have any questions or problems concerning your player, please consult your nearest Sony dealer.

About This Manual

• Instructions in this manual describe the controls on the remote. You can also use the controls on the player if they have the same or similar names as those on the remote.

• “DVD” may be used as a general term for commercial DVDs, DVD+RWs/DVD+Rs/ DVD+Rs DL (+VR mode) and DVD-RWs/DVD-Rs/DVD-Rs DL (VR mode, video mode).

• The meaning of the icons used in this manual is described below:

Icons Meaning

Functions available for commercial DVDs and DVD+RWs/DVD+Rs/ DVD+Rs DL in +VR mode or DVD-RWs/DVD-Rs/DVD-Rs DL in video mode

Functions available for DVD-RWs/DVD-Rs/DVD-Rs DL in VR (Video Recording) mode

Functions available for VIDEO CDs (including Super VCDs or CD-Rs/CDRWs in video CD format or Super VCD format)

Functions available for music CDs or CD-Rs/CD-RWs in music CD format

Functions available for DATA CDs (CD-ROMs/CD-Rs/CD-RWs containing MP3

Functions available for DATA DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/ DVD+Rs DL/DVD-RWs/DVD-Rs/DVD-Rs DL containing MP3

*1 MP3 (MPEG-1 Audio Layer III) is a standard format defined by ISO (International Organization for

*2 DivX *3 DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

image files, and DivX

Standardization)/IEC (International Electrotechnical Commission) MPEG which compresses audio data.

is a video file compression technology, developed by DivX, Inc.

audio tracks, JPEG image files, and DivX

*2*3

video files)

*2*3

video files)

audio tracks, JPEG

This Player Can Play the Following Discs

Format of discs

Commercial DVD

DVD-RW/-R

DVD+RW/+R/ +R DL

VIDEO CD/ Music CD

CD-RW/-R

“DVD+RW,” “DVD-RW,” “DVD+R,” “DVD+R DL,” “DVD-R,” “DVD VIDEO,” and “CD” logos are trademarks.

Note about CDs/DVDs

The player can play CD-ROMs/CD-Rs/CDRWs recorded in the following formats: – music CD format – video CD format – MP3 audio tracks, JPEG image files, and

DivX video files of format conforming to ISO 9660* Level 1/Level 2, or its extended format, Joliet

– KODAK Picture CD format

* A logical format of files and folders on CD-

ROMs, defined by ISO (International Organization for Standardization).

The player can play DVD-ROMs/ DVD+RWs/DVD+Rs/DVD+Rs DL/ DVD-RWs/DVD-Rs/DVD-Rs DL recorded in the following format: – MP3 audio tracks, JPEG image files, and

DivX video files of format conforming to UDF (Universal Disk Format).

Example of discs that the player cannot play

The player cannot play the following discs:

• CD-ROMs/CD-Rs/CD-RWs other than those recorded in the formats listed on this page.

• CD-ROMs recorded in PHOTO CD format.

• Data part of CD-Extras.

• DVD Audio discs.

• DATA DVDs that do not contain MP3 audio tracks, JPEG image files, or DivX video files.

• HD layer on Super Audio CDs.

Also, the player cannot play the following discs:

• A commercial DVD with a different region code.

• A disc recorded in a color system other than NTSC, such as PAL or SECAM (this player conforms to the NTSC color system).

• A disc that has a non-standard shape (e.g., card, heart).

• A disc with paper or stickers on it.

• A disc that has the adhesive of cellophane tape or a sticker still left on it.

Region code

Your player has a region code printed on the back of the unit and only will play commercial DVDs (playback only) labeled with identical region codes. This system is used to protect copyrights.

ALL

Region code

Commercial DVDs labeled will also play on this player.

If you try to play any other commercial DVD, the message “Playback prohibited by area limitations.” will appear on the TV screen. Depending on the commercial DVD, there may be no region code indication, even though playing the commercial DVD is prohibited by area restrictions.

DVP–XXXX

00V 00Hz

NO.

00W

0-000-000-00

1-1

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

Notes

• Notes about DVD+RWs/DVD+Rs/ DVD+Rs DL, DVD-RWs/DVD-Rs/ DVD-Rs DL or CD-Rs/CD-RWs

Some DVD+RWs/DVD+Rs/DVD+Rs DL, DVD-RWs/DVD-Rs/DVD-Rs DL, or CD-Rs/ CD-RWs cannot be played on this player due t o the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions for the recording device. Note that some playback functions may not work with some DVD+RWs/DVD+Rs/DVD+Rs DL, even if they have been correctly finalized. In this case, view the disc by normal playback. Also some DATA CDs/DATA DVDs created in Packet Write format cannot be played.

• Music discs encoded with copyright protection

technologies

This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

• Images in DVD-VR mode with CPRM* protection may not be played if they contain a copy protection signal, “Copyright lock” appears on the screen. * CPRM (Content Protection for Recordable

Media) is a coding technology that protects the copyright of images.

• Note on DualDiscs

A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.

Note on playback operations of DVDs and VIDEO CDs

Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers. Since this player plays DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VIDEO CDs.

Copyrights

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Index to Parts and Controls

For more information, see the pages indicated in parentheses.

Front panel

A [/1 (on/standby) button (21) B Disc tray (21) C Front panel display (9) D A (open/close) button (21)

Rear panel

DIGITAL OUT LINE OUT

COAXIAL VIDEO

R-AUDIO-L

COMPONENT VIDEO OUT

A DIGITAL OUT (COAXIAL) jack (17) B LINE OUT L/R (AUDIO) jacks (17)

E H (play) button (21) F x (stop) button (22) G (remote sensor) (14)

C LINE OUT (VIDEO) jack (15) D COMPONENT VIDEO OUT jacks

(15)

Front panel display

When playing back a DVD

Playing status

Lights up during Repeat Play (29)

Lights up when you can change the angle (41)

When playing back a VIDEO CD with Playback Control (PBC) (25)

Playing status

Lights up during A-B Repeat Play (30)

When playing back a CD, DATA CD (MP3 audio/DivX video), DATA DVD (MP3 audio/DivX video), or VIDEO CD (without PBC)

Playing status

Lights up during Repeat Play (29)

* When playing DivX video files, the current track is not displayed.

Current title/chapter or playing time (35)

Current scene or playing time (35)

Current track* (35)

Playing time (35)

,continued

Remote

I ./> PREV/NEXT (previous/

next) buttons (22)

J m/M SCAN/SLOW

buttons (32)

K ZOOM button (22, 48) L SLOW PLAY/FAST PLAY buttons

(22)

M AUDIO button (38) N SUBTITLE button (41, 48) O [/1 (on/standby) button (21) P VOL (volume) +/– buttons (58)

The + button has a tactile dot.*

Q TV/VIDEO button (58) R PICTURE NAVI (picture navigation)

button (34, 48)

S TIME/TEXT button (35) T MENU button (24) U ENTER button (19) V DISPLAY button (11) W H PLAY button (21)

The H button has a tactile dot.*

X x STOP button (22) Y X PAUSE button (22) Z SUR (surround) button (39)

wj ANGLE button (41)

* Use the tactile dot as a reference when operating

A TV [/1 (on/standby) button (58) B Z OPEN/CLOSE button (22) C Number buttons (24)

The number 5 button has a tactile dot.*

D CLEAR button (26) E TOP MENU button (24) F C/X/x/c buttons (24) G O RETURN button (22) H / REPLAY/STEP/

ADVANCE/STEP buttons (22, 32)

the player.

1-2

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

Guide to the Control Menu Display

Use the Control Menu to select a function and to view related information. Press DISPLAY repeatedly to turn on or change the Control Menu display as follows:

Control Menu display 1

Control Menu display 2 (Only for DATA CDs/DATA DVDs without DivX video files)

Control Menu display off

Control Menu display

The Control Menu display 1 and 2 will show different items depending on the disc type. For details about each item, see the pages in parentheses.

Example: Control Menu display 1 when playing a DVD VIDEO.

Playback status (N Playback,

X Pause, x Stop, etc.)

Type of disc being played*

Playing time* Current setting

Options

,continued

Control Menu items

1 2 (2 7 1 8 (3 4 T

Selected item

Function name of selected Control Menu item

Operation message

*1Displays the scene number for VIDEO CDs

(PBC is on), track number for VIDEO CDs/ CDs, album number for DATA CDs/DATA DVDs.

*2Displays the index number for VIDEO CDs,

MP3 audio track number, or JPEG image file number for DATA CDs/DATA DVDs. DivX video file number for DATA CDs/DATA DVDs.

Displays Super VCD as “SVCD.”

Displays the date for JPEG files.

To turn off the display

Press DISPLAY.

OFF OFF SET ON

PROGRAM

1 : 3 2 : 5 5

Currently playing chapter number*

Currently playing title number*

Total number of titles*

Total number of chapters*

) )

ENTER DISPLAY

Quit:

PLAY DVD VIDEO

List of Control Menu items

Item Item Name, Function

TITLE (page 32)/SCENE (page 32)/TRACK (page 32)

Selects the title, scene, or track to be played.

CHAPTER (page 32)/INDEX (page 32)

Selects the chapter or index to be played.

TRACK (page 32)

Selects the track to be played.

ORIGINAL/PLAY LIST (page 24)

Selects the type of titles (DVD-VR mode) to be played, the ORIGINAL one, or an edited PLAY LIST.

TIME/TEXT (page 32)

Checks the elapsed time and the remaining playback time. Input the time code for picture and music searching. Displays the DVD/CD text or the DATA CD/DATA DVD track/file name.

PROGRAM (page 26)

Selects the title, chapter, or track to play in the order you want.

SHUFFLE (page 28)

Plays the title, chapter, or track in random order.

REPEAT (page 29)

Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/track/ album/file repeatedly.

A-B REPEAT (page 30)

Specifies the parts you want to play repeatedly.

CUSTOM PICTURE MODE (page 42)

Adjusts the video signal from the player. You can select the picture quality that best suits the program you are watching.

SHARPNESS (page 44)

Exaggerates the outline of the image to produce a sharper picture.

PARENTAL CONTROL (page 55)

Set to prohibit playback on this player.

SETUP (page 59)

QUICK Setup (page 19) Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of the TV and the audio output signal. CUSTOM Setup In addition to the Quick Setup setting, you can adjust various other settings. RESET Returns the settings in “SETUP” to the default setting.

ALBUM (page 32)

Selects the album that contains MP3 audio track and JPEG image file to be played.

FILE (page 32)

Selects the JPEG image file to be played.

ALBUM (page 32)

Selects the album that contains DivX video file to be played.

FILE (page 32)

Selects the DivX video file to be played.

DATE (page 49)

Displays the date the picture was taken by a digital camera.

INTERVAL (page 50)

Specifies the duration for which the slides are displayed on the screen.

EFFECT (page 51)

Selects the effects to be used for changing slides during a slide show.

MODE (MP3, JPEG) (page 50)

Selects the data type; MP3 audio track (AUDIO), JPEG image file (IMAGE), or both (AUTO) to be played when playing a DATA CD or DATA DVD.

z Hint

The Control Menu icon indicator lights up in green

except “OFF” (“PROGRAM,” “SHUFFLE,” “REPEAT,” “A-B REPEAT,” “SHARPNESS” only). The “ORIGINAL/PLAY LIST” indicator lights up in green when you select “PLAY LIST” (default setting). The “CUSTOM PICTURE MODE” indicator lights up in green when any setting other than “STANDARD” is selected.

when you select any item

Hookups

Hooking Up the Player

Follow steps 1 to 6 to hook up and adjust the settings of the player.

Notes

• Plug cords securely to prevent unwanted noise.

• Refer to the instructions supplied with the components to be connected.

• You cannot connect this player to a TV that does not have a video inpu t jack.

• Be sure to disconnect the power cord of each component before connecti ng.

Step 1: Unpacking

Check that you have the following items:

• Audio/Video cord (phono plug × 3 y phono plug × 3) (1)

• Remote commander (remote) (1)

• Size AA (R6) batteries (2)

Step 2: Inserting Batteries Into the Remote

You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the player.

Notes

• Do not leave the remote in an extremely hot or humid place.

• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a malfunction.

• If you do not use the remote for an extended period of time, remove the batteries to a void possible damage from battery leakage and corrosion.

1-3

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

Step 3: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. Select one of the patterns A or B, according to the input jack on your TV monitor, projector, or AV amplifier (receiver). In order to view progressive signal (480p) pictures with a compatible TV, projector, or monitor, you must use pattern B.

(yellow)

INPUT

VIDEO

AUDIO

TV, projector or AV amplifier (receiver)

to LINE OUT (VIDEO)

DIGITAL OUT

COAXIAL

COMPONENT VIDEO OUT

(green)

(blue)

Component video cord (not supplied)

l : Signal flow

A If you are connecting to a video input jack

Connect the yellow plug of an audio/video cord (supplied) to the yellow (video) jack. You will enjoy standard quality images.

Yellow

White (L)

Red (R)

R-AUDIO-L

(red)

Audio/video cord (supplied)

LINE OUT

VIDEO

to COMPONENT VIDEO OUT

(yellow)

CD/DVD player

COMPONENT

TV, projector or AV amplifier (receiver)

Yellow

White (L)

Red (R)

VIDEO IN

(green)

(blue)

(red)

B If you are connecting to a monitor, projector, or AV amplifier

(receiver) having component video input jacks (Y, P

Connect the component via the COMPONENT VIDEO OUT jacks using a component video

Hookups

cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high quality images. If your TV accepts progressive 480p format signals, use this connection and set “PROGRESSIVE (COMPONENT OUT)” in “SCREEN SETUP” to “ON” (page 62) to output progressive signals.

Green

Blue

Red

When connecting to a wide screen TV

Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see page 61.

Note

Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the player to this jack.

VCR

CD/DVD player

Connect directly

Green

Blue

Red

B, PR)

,continued

Step 4: Connecting the Audio Cords

Select one of the following patterns A or B, according to the input jack on your TV monitor, projector, or AV amplifier (receiver). This will enable you to listen to sound.

(white)

(red)

CD/DVD player

INPUT

VIDEO

AUDIO

TV, projector, or AV amplifier (receiver)

[Speakers]

Rear (R)

Front (R)

SubwooferCenter

R-AUDIO-L

DIGITAL OUT

[Speakers]

Rear (L)

Front (L)

COAXIAL

(red)

Audio/video cord (supplied)

(white)

(yellow)*

LINE OUT

VIDEO

to LINE OUT L/R (AUDIO)

LINE OUT

DIGITAL OUT

VIDEO

COAXIAL

R-AUDIO-L

COMPONENT VIDEO OUT

to DIGITAL OUT (COAXIAL)

AV amplifier (receiver) with a decoder

(yellow)*

Coaxial digital cord (not supplied)

to coaxial digital input

Hookups

A Connecting to audio L/R input

jacks

This connection will use your TV’s or stereo amplifier’s (receiver’s) two speakers for sound. Connect using the audio/video cord (supplied).

Yellow

White (L)

Red (R)

• Surround effect (page 40)

TV: Dynamic Theater, Dynamic, Wide, Night

Stereo amplifier (receiver): Standard, Night

B Connecting to a digital audio

input jack

If your AV amplifier (receiver) has a Dolby* Digital or DTS*2 decoder and a digital input jack, use this connection. Connect using a digital coaxial cord (not supplied).

Yellow

Coaxial cord

White (L)

Red (R)

• Surround effect Dolby Digital (5.1ch), DTS (5.1ch)

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Notes

• After you have completed the connection, make the appropriate settings in Quick Setup (page 19). Otherwise, no sound or a loud noise will come from your speakers.

• The TVS effects of this player cannot be used with this connection.

• In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output through the LINE OUT L/R (AUDIO) jacks, even if you set “DTS” to “ON” in Quick Setup (page 19).

: Signal flow

* The yellow plug is used for video signals (page15).

z Hint

For correct speaker location, see the operating instructions supplied with the connected components.

,continued

1-4

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

Step 5: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet.

Step 6: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player. To skip an adjustment, press >. To return to the previous adjustment, press ..

ENTE

1 Turn on the TV. 2 Press [/1. 3 Switch the input selector on your

TV so that the signal from the player appears on the TV screen.

“Press [ENTER] to run QUICK SETUP” (press enter to run Quick Setup) appears at the bottom of the screen. If this message does not appear, select “QUICK” under “SETUP” in the Control Menu to run Quick Setup (page 60).

4 Press ENTER without inserting a

disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP

OSD: MENU: AUDIO: SUBTITLE:

ENGLISH ENGLISH

FRENCH

SPANISH

PORTUGUESE

5 Press X/x to select a language.

The player displays the menu and subtitles in the selected language.

6 Press ENTER.

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

SCREEN SETUP

TV TYPE: SCREEN SAVER: BACKGROUND: BLACK LEVEL: BLACK LEVEL PROGRESSIVE MODE 4:3 OUTPUT: FULL

(PROGRESSIVE)

4:3 LETTER BOX 4:3 LETTER BOX

(COMPONENT OUT)

4:3 PAN SCAN

16:9

OFF OFF

AUTO

,continued

7 Press X/x to select the setting that

matches your TV type.

◆ If you have a 4:3 standard TV

• 4:3 LETTER BOX or 4:3 PAN SCAN

Hookups

(page 61)

◆ If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode

• 16:9 (page 61)

8 Press ENTER.

The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears.

Is this player connected to an amplifier (receiver) ? Select the type of jack you are using.

YES

LINE OUTPUT L/R (AUDIO) DIGITAL OUTPUT

9 Press X/x to select the type of jack

(if any) you are using to connect to an amplifier (receiver), then press ENTER.

If you did not connect an AV amplifier (receiver), select “NO,” then go to step

13. If you connected an AV amplifier (receiver) using just an audio cord, select “YES: LINE OUTPUT L/R (AUDIO),” then go to step 13. If you connected an AV amplifier (receiver) using a digital coaxial cord, select “YES: DIGITAL OUTPUT.”

AUDIO SETUP

AUDIO DRC: DOWNMIX: DIGITAL OUT:

DOLBY DIGITAL: DTS: 48kHz/96kHz PCM:

STANDARD

DOLBY SURROUND

ON D-PCM D-PCM

DOLBY DIGITAL

11Press ENTER.

“DTS” is selected.

AUDIO SETUP

AUDIO DRC: DOWNMIX: DIGITAL OUT:

DOLBY DIGITAL: DTS: 48kHz/96kHz PCM:

12Press X/x to select whether or

not you wish to send a DTS signal to your amplifier (receiver).

If your AV amplifier (receiver) has a DTS decoder, select “ON.” Otherwise, select “OFF.”

STANDARD

DOLBY SURROUND

ON D-PCM

OFF OFF

13Press ENTER.

Quick Setup is finished. All connections and setup operations are complete.

10Press X/x to select the type of

Dolby Digital signal you wish to send to your amplifier (receiver).

If your AV amplifier (receiver) has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select “D-PCM.”

Playing Discs

Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc.

RETURN

ENTER

1 Turn on your TV. 2 Press [/1.

The player turns on.

3 Switch the input selector on your

TV so that the signal from the player appears on the TV screen.

◆ When using an amplifier (receiver)

Turn on the amplifier (receiver) and select the appropriate channel so that you can hear sound from the player.

4 Press A on the player, and place a

disc on the disc tray.

Playback side facing down

5 Press H.

The disc tray closes. The player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver). Depending on the disc, a menu may appear on the TV screen. For DVD VIDEOs, see page 24. For VIDEO CDs, see page 25.

To turn off the player

Press [/1. The player enters standby mode.

z Hint

You can have the player turn off automatically whenever you leave it in stop mode for more than 30 minutes. To turn this function on or off, set “AUTO POWER OFF” in “CUSTOM SETUP” to “ON” or “OFF” (page 63).

Note

Discs created on DVD recorders must be correctl y finalized before they can be played. For more information about finalizing, refer to the o perating instructions supplied with the DVD recorder.

Notes on playing DTS sound tracks on a DVD VIDEO

• DTS audio signals are output only through the DIGITAL OUT (COAXIAL) jack.

• When you play a DVD VIDEO with DTS sound tracks, set “DTS” to “ON” in “AUDIO SETUP” (page 65).

• If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to “ON” in “AUDIO SETUP” (page 65). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged.

,continued

Playing Discs

Additional operations

CLEAR

REPLAY

ZOOM

SLOW PLAY

To Operation

Stop Press x Pause Press X

Resume play after pause

Go to the next chapter, track, or scene in continuous play mode

Go back to the previous chapter, track, or scene in continuous play mode

Stop play and remove the disc

Replay the previous

scene*

Briefly fast forward the current scene*

Magnify the image*

*1All DVDs except for DVD+Rs/DVD+RWs/

DVD+Rs DL. The button cannot be used for DivX video files.

*2DVDs only. The button cannot be used for

DivX video files.

*3Video and JPEG pictures only (except

BACKGROUND pictures). You can move the enlarged picture using C/X/x/c. Depending upon the contents of the disc, the zoom function may be canceled automatically when the picture is moved.

Note

You may not be able to use the Replay or Advance function with some scenes.

Press X or H

Press >

Press .

Press Z

Press REPLAY during playback

Press

ADVANCE during playback

Press ZOOM repeatedly. Press CLEAR to cancel.

ADVANCE

FAST PLAY

Playback quickly or slowly with sound

You can listen to dialog or sound while playing the current scene quickly or slowly.

During playback, press FAST PLAY or SLOW PLAY.

The speed changes when you press either FAST PLAY or SLOW PLAY.

To return to normal playback

Press H.

Notes

• You can only use this function with DVDs, VIDEO CDs, or Super VCDs only.

• “Operation not possible” will appear when maximum or minimum speed is reached.

• During Fast Play or Slow Play mode, you cannot change the angle (page 41), subtitle (page 41), and sound (page 38). The sound can only be changed for VIDEO CDs/Super VCDs.

• Fast Play and Slow Play functions do not work when playing DTS sound tracks.

• You cannot use Fast Play or Slow Play function when playing a still picture in DVD-VR mode.

Locking the disc tray (Child Lock)

You can lock the disc tray to prevent children from opening it.

When the player is in standby mode, press O RETURN, ENTER, and then [/1 on the remote.

The player turns on and “LOCKED” appears on the front panel display. The buttons on the player or the remote do not work while the Child Lock is set.

To unlock the disc tray

When the player is in standby mode, press O RETURN, ENTER, and then [/1 again.

Note

Even if you select “RESET” under “SETUP” in the Control Menu (page 60), the disc tray remains locked.

A and Z

1-5

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

Resuming Playback From the Point Where You Stopped the Disc (Multi-disc

Resume)

The player stores the point where you stopped the disc for up to 6 discs and resumes playback the next time you insert the same disc. If you store a resume playback point for the seventh disc, the resume playback point for the first disc is deleted.

1 While playing a disc, press x to

stop playback.

“RESUME” appears on the front panel display.

2 Press H.

The player starts playback from the point where you stopped the disc in step 1.

z Hint

To play from the beginning of the disc, press x twice, then press H.

Notes

• “MULTI-DISC RESUME” in “CUSTOM SETUP” must be set to “ON” (default) for this function to work (page 63).

• The point where you stopped playing is cleared when:

– you change the play mode. – you change the settings on the Setup Displa y.

• For DVD-VR mode, CDs, DATA CDs, and DATA DVDs the player remembers the resume playback point for the current disc. The resume point is cleared when:

– you opened the disc tray. – you disconnect the power cord. – the player enters standby mode (DATA CD/

DATA DVD only).

• Resume Play does not work during Shuffle Play and Program Play.

• This function may not work with some discs.

• I f “MULTI-DISC RESUME” in “CUSTOM SETUP” is set to “ON” and you playback a recorded disc such as DVD-RW, the player may playback other recorded discs from the same resume point.

Playing Discs

Using the DVD’s Menu

A DVD VIDEO is divided into long sections of a picture or a music feature called “titles.” When you play a DVD VIDEO which contains several titles, you can select the title you want using the TOP MENU button. When you play DVD VIDEOs that allow you to select items such as language for the sound and subtitles, select these items using the MENU button.

Number buttons

MENUTOP MENU ENTER

1 Press TOP MENU or MENU.

The disc’s menu appears on the TV screen. The contents of the menu vary from disc to disc.

2 Press C/X/x/c or the number

buttons to select the item you want to play or change.

If you press the number buttons, the following display appears. Press the number buttons to select the item you want.

Selecting “ORIGINAL” or “PLAY LIST” in DVD-VR mode

Some DVD-VR (Video Recording) mode have two types of titles for playback: originally recorded titles (ORIGINAL) and titles that can be created on recordable DVD players for editing (PLAY LIST). You can select the type of title to be played.

ENTER

DISPLAY

1 Press DISPLAY when the player is

in stop mode.

The Control Menu appears.

2 Press X/x to select

(ORIGINAL/PLAY LIST), then press ENTER.

The options for “ORIGINAL/PLAY LIST” appear.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5 PLAY LIST PLAY LIST ORIGINAL

DVD-VR

3 Press X/x to select a setting.

• PLAY LIST: plays the titles created from “ORIGINAL” for editing.

• ORIGINAL: plays the titles originally recorded.

4 Press ENTER.

Playing VIDEO CDs With PBC Functions (PBC Playback)

PBC (Playback Control) allows you to play VIDEO CDs interactively by following the menu on the TV screen.

Number buttons

RETURN

ENTER

1 Start playing a VIDEO CD with PBC

functions.

The menu for your selection appears.

2 Press the number buttons to select

the item number you want.

3 Press ENTER. 4 Follow the instructions in the

menu for interactive operations.

Refer to the instructions supplied with the disc, as the operating procedure may differ depending on the VIDEO CD.

To return to the menu

Press O RETURN.

Playing Discs

3 Press ENTER.

z Hint

To play without using PBC, press ./> or the number buttons while the player is stopped t o select a track, then press H or ENTER. “Play without PBC” appears on the TV screen and the player starts continuous play. You cannot play still pictures such as a menu. To return to PBC playback, press x twice then press H.

Note

Depending on the VIDEO CD, “Press ENTER” in step 3 may appear as “Press SELECT” in the instructions supplied with the disc. In this case, press H.

Various Play Mode Functions (Program Play,

Shuffle Play, Repeat Play, A-B Repeat

Play)

You can set the following play modes:

• Program Play (page 26)

• Shuffle Play (page 28)

• Repeat Play (page 29)

• A-B Repeat Play (page 30)

CLEAR

Note

The play mode is canceled when: – you open the disc tray. – the player enters standby mode by pressing [/1.

Creating your own program (Program Play)

You can play the contents of a disc in the order you want by arranging the order of the titles, chapters, or tracks on the disc to create your own program. You can program up to 99 titles, chapters, and tracks.

1 Press DISPLAY.

The Control Menu appears.

2 Press X/x to select

(PROGRAM), then press ENTER.

The options for “PROGRAM” appear.

ENTER

DISPLAY

,continued

1-6

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5 OFF OFF SET ON

3 Press X/x to select “SET t,” then

press ENTER.

“TRACK” is displayed when you play a VIDEO CD or CD.

PROGRAM

ALL CLEAR

1. TITLE – –

2. TITLE – –

3. TITLE – –

4. TITLE – –

5. TITLE – –

6. TITLE – –

7. TITLE

4 Press c.

The cursor moves to the title or track row “T” (in this case, “01”).

PROGRAM

ALL CLEAR

– –

1. TITLE – –

2. TITLE – –

3. TITLE – –

4. TITLE – –

5. TITLE – –

6. TITLE – –

7. TITLE

Chapters recorded on a disc

5 Select the title, chapter, or track you

want to program.

◆ When playing a DVD VIDEO

For example, select chapter “03” of title “02.” Press X/x to select “02” under “T,” then press ENTER.

PROGRAM

ALL CLEAR

– –

1. TITLE – –

2. TITLE – –

3. TITLE – –

4. TITLE – –

5. TITLE – –

6. TITLE – –

7. TITLE

PLAY DVD VIDEO

– – 01 02 03 04 05

Titles or tracks recorded on a disc

– –

ALL

02 03

04 05

05 06

– –

ALL

Next, press X/x to select “03” under “C,” then press ENTER.

PROGRAM

ALL CLEAR

1. TITLE 0 2

2. TITLE

3. TITLE

4. TITLE

5. TITLE

6. TITLE

7. TITLE

Selected title and chapter

◆ When playing a VIDEO CD or CD

For example, select track “02.” Press X/x to select “02” under “T,” then press ENTER.

Selected track

PROGRAM

ALL CLEAR

1. TRACK 0 2

2. TRACK

3. TRACK

4. TRACK

5. TRACK

6. TRACK

7. TRACK

Total time of the programmed tracks

6 To program other titles, chapters, or

tracks, repeat steps 4 to 5.

The programmed titles, chapters, and tracks are displayed in the selected order.

7 Press H to start Program Play.

Program Play begins. When the program ends, you can restart the same program again by pressing H.

To return to normal play

Press CLEAR, or select “OFF” in step 3. To play the same program again, select “ON” in step 3 and press ENTER.

– –

–

0 3

– –

0:15:30

– –

To change or cancel a program

1 Follow steps 1 to 3 of “Creating your own

program (Program Play).”

2 Select the program number of the title,

chapter, or track you want to change or cancel using X/x and press c. If you want to delete the title, chapter, or track from the program, press CLEAR.

,continued

Playing Discs

Follow step 5 for new programming. To

cancel a program, select “--” under “T,” then press ENTER.

To cancel all of the titles, chapters, or tracks in the programmed order

1 Follow steps 1 to 3 of “

program (Program Play).”

Creating your own

2 Press X and select “ALL CLEAR.” 3 Press ENTER.

z Hint

You can perform Repeat Play or Shuffle Play of programmed titles, chapters, or tracks. During Program Play, follow the steps of Repeat Pla y (page

29) or Shuffle Play (page 28).

Notes

• When you program tracks on a Super VCD, the total playing time is not displayed.

• You cannot use this function with VIDEO CDs or Super VCDs with PBC playback.

Playing in random order (Shuffle Play)

You can have the player “shuffle” titles, chapters, or tracks. Subsequent “shuffling” may produce a different playing order.

1 Press DISPLAY during playback.

The Control Menu appears.

2 Press X/x to select

(SHUFFLE), then press ENTER.

The options for “SHUFFLE” appear.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5

OFF OFF TITLE CHAPTER

3 Press X/x to select the item to be

shuffled.

◆ When playing a DVD VIDEO

•TITLE

• CHAPTER

◆ When playing a VIDEO CD or CD

•TRACK

◆ When Program Play is activated

• ON: shuffles titles, chapters, or tracks selected in Program Play.

4 Press ENTER.

Shuffle Play starts.

To return to normal play

Press CLEAR, or select “OFF” in step 3.

z Hints

• You can set Shuffle Play while the player is stopped. After selecting the “SHUFFLE” option, press H. Shuffle Play starts.

• Up to 200 chapters in a disc can be played in random order when “CHAPTER” is selected.

Note

You cannot use this function with VIDEO CDs or Super VCDs with PBC playback.

PLAY DVD VIDEO

Playing repeatedly (Repeat Play)

You can play all of the titles or tracks on a disc, or a single title, chapter, or track repeatedly. You can use a combination of Shuffle or Program Play modes.

1 Press DISPLAY during playback.

The Control Menu appears.

2 Press X/x to select

(REPEAT), then press ENTER.

The options for “REPEAT” appear.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5

OFF OFF DISC TITLE CHAPTER

3 Press X/x to select the item to be

repeated.

◆ When playing a DVD VIDEO

• DISC: repeats all of the titles.

• TITLE: repeats the current title on a disc.

• CHAPTER: repeats the current chapter.

◆ When playing in DVD-VR mode

• DISC: repeats all the titles of the selected type.

• TITLE: repeats the current title on a disc.

• CHAPTER: repeats the current chapter.

◆ When playing a VIDEO CD or CD

• DISC: repeats all of the tracks.

• TRACK: repeats the current track.

◆ When playing a DATA CD or DATA DVD

• DISC: repeats all of the albums.

• ALBUM: repeats the current album.

• TRACK (MP3 audio tracks only): repeats the current track.

• FILE (DivX video files only): repeats the current file.

DVD VIDEO

◆ When Program Play or Shuffle Play is activated

• ON: repeats Program Play or Shuffle Play.

4 Press ENTER.

Repeat Play starts.

To return to normal play

Press CLEAR, or select “OFF” in step 3.

z Hint

You can set Repeat Play while the player is stoppe d. After selecting the “REPEAT” option, press H. Repeat Play starts.

Notes

• You cannot use this function with VIDEO CDs or Super VCDs with PBC playback.

• When repeating a DATA CD/DATA DVD which contains MP3 audio tracks and JPEG image files, and their playing times are not the same, the s ound will not match the image.

• When “MODE (MP3, JPEG)” is set to “IMAGE (JPEG)” (page 50), you cannot select “TRACK.”

Playing Discs

Repeating a specific portion (A-B Repeat Play)

You can play a specific portion of a title, chapter or track repeatedly. (This function is useful when you want to memorize lyrics, etc.)

1 Press DISPLAY during playback.

The Control Menu appears.

2 Press X/x to select (A-B

REPEAT), then press ENTER.

The options for “A-B REPEAT” appear.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5

OFF SET OFF

3 Press X/x to select “SET t,” then

press ENTER.

The “A-B REPEAT” setting bar appears.

A 18 - 1:32:30 B

4 During playback, when you find the

starting point (point A) of the portion to be played repeatedly, press ENTER.

The starting point (point A) is set.

A 18 - 1:32:55 B 18 - 1:33:05

5 When you reach the ending point

(point B), press ENTER again.

The set points are displayed and the player starts repeating this specific portion.

PLAY DVD VIDEO

To return to normal play

Press CLEAR, or select “OFF” in step 3.

Notes

• When you set A-B Repeat Play, the settings for Shuffle Play, Repeat Play, and Program Play are canceled.

• A-B Repeat Play does not work across multiple titles.

• You may not set A-B Repeat Play for contents in DVD-VR mode that contains still pictures.

,continued

1-7

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

Searching for a Scene

Searching for a Particular Point on a Disc (Scan, Slow-motion Play,

Freeze Frame)

You can quickly locate a particular point on a disc by monitoring the picture or playing back slowly.

STEP

Notes

• Depending on the disc, you may not be able to do some of the operations described.

• For DATA CDs/DATA DVDs, you can search for a particular point only on an MP3 audio track or DivX video file.

STEP

Locating a point quickly by playing a disc in fast forward or fast reverse (Scan)

Press m or M while playing a disc. When you find the point you want, press H to return to normal speed. Each time you press m or M during scan, the scan speed changes. With each press the indication changes as shown below. Actual speeds may differ between discs.

Playback direction

×2B t 1M t 2M t 3M

3M (DVD/VIDEO CD/DATA CD*/DATA DVD* only) ×2B (D VD VIDEO/CD only)

Opposite direction

×2b t 1m t 2m t 3m

3m (DVD/VIDEO CD/DATA CD*/DATA DVD* only) × 2b (DVD VI DEO only)

* DivX video only

The “× 2B”/ “× 2b” playback speed is about twice the normal speed. The “3M”/“3m” playback speed is faster than “2M”/“2m” and the “2M”/“2m” playback speed is faster than “1M”/ “1m.”

Watching frame by frame (Slow-motion Play)

Press m or M when the player is in pause mode. To return to normal speed, press H. Each time you press m or M during Slow-motion Play, the playback speed changes. Two speeds are available. With each

Searching for a Scene

press the indication changes as follows:

Playback direction

2 y 1

Opposite direction (DVD only)

2 y 1

The “2 y”/“2 ” playback speed is slower than “1 y”/“1 .”

Note

For DATA CDs/DATA DVDs, this function works only for DivX video files.

Searching for a Title/ Chapter/Track/Scene, etc.

You can search a DVD by title or chapter, and you can search a VIDEO CD/CD/DATA CD/ DATA DVD by track, index, file, or scene. As titles and tracks are assigned unique numbers on the disc, you can select the desired one by entering its number. You can also search for a scene using the time code.

Number buttons

CLEAR

ENTER

DISPLAY

Playing one frame at a time (Freeze Frame)

When the player is in the pause mode, press

STEP to go to the next frame. Press STEP to go to the preceding frame

(DVD only). To return to normal playback, press H.

Notes

• You cannot search for a still picture in DVD-VR mode.

• For DATA CDs/DATA DVDs, this function works only for DivX video files.

1 Press DISPLAY (When playing a

DATA CD or DATA DVD with JPEG image files, press twice).

The Control Menu appears.

2 Press X/x to select the search

method.

◆ When playing a DVD

TITLE

CHAPTER

TIME/TEXT

Select “TIME/TEXT” to search for a starting point by inputting the time code.

◆ When playing a VIDEO CD or Super VCD without PBC Playback

TRACK

INDEX

◆ When playing a VIDEO CD or Super VCD with PBC Playback

SCENE

◆ When playing a CD

TRACK

◆ When playing a DATA CD/DATA DVD

ALBUM

TRACK (MP3 audio tracks only)

FILE (JPEG image files only)

◆ When playing a DATA CD (DivX video files)/DATA DVD (DivX video files)

ALBUM

FILE

Example: when you select CHAPTER “** (**)” is selected (** refers to a number). The number in parentheses indicates the total number of titles, chapters, tracks, indexes, scenes, albums, or files.

1 2 (2 7 1 8 (3 4 T

) )

1 : 3 2 : 5 5

Selected row

PLAY DVD VIDEO

3 Press ENTER.

“** (**)” changes to “-- (**).”

1 2 (2 7

(

) )

3 4

1 : 3 2 : 5 5

PLAY DVD VIDEO

,continued

4 Press the number buttons to select

the title, chapter, track, index, scene, etc., number you want to search.

If you make a mistake

Cancel the number by pressing CLEAR, then select another number.

5 Press ENTER.

The player starts playback from the selected number.

To search for a scene using the time code (DVD only)

1 In step 2, select TIME/TEXT.

“T **:**:**” (playing time of the current title) is selected.

2 Press ENTER.

“T **:**:**” changes to “T --:--:--.”

3 Input the time code using the number

buttons, then press ENTER. For example, to find the scene at 2 hours, 10 minutes, and 20 seconds after the beginning, just enter “2:10:20.”

z Hints

• When the Control Menu display is turned off, you can search for a chapter (DVD), track (CD/DATA CD/DATA DVD), file (DATA CD (DivX video)/ DATA DVD (DivX video)) by pressing the number buttons and ENTER.

• You can display the first scene of titles, chapters, or tracks recorded on the disc on a screen divided into 9 sections. You can start playback directl y by selecting one of the scenes. For details, see “Searching by Scene (PICTURE NAVIGATION)” (page 34).

Notes

• The title, chapter, or track number displayed is the same number recorded on the disc.

• You cannot search for a scene on a DVD+RW/ DVD+R/DVD+R DL using the time code.

Searching for a Scene

Searching by Scene

(PICTURE NAVIGATION)

You can divide the screen into 9 subscreens and find the desired scene quickly.

RETURN

1 Press PICTURE NAVI during

playback.

The following display appears.

CHAPTER VIEWER

PICTURE NAVI

ENTER

DISPLAY

ENTER

3 Press ENTER.

The first scene of each chapter, title, or track appears as follows.

4 Press C/X/x/c to select a chapter,

title, or track, and press ENTER.

Playback starts from the selected scene.

To return to normal play during setting

Press O RETURN or DISPLAY.

z Hint

If there are more than 9 chapters, titles, or tracks, V is displayed at the bottom right of the scre en. To display the additional chapters, titles, or tracks, select the bottom scenes and press x. To return to the previous scene, select the top scenes a nd press X.

Note

Depending on the disc, you may not be able to select some items.

2 Press PICTURE NAVI repeatedly to

select an item.

• CHAPTER VIEWER (DVD VIDEO only): displays the first scene of each chapter.

• TITLE VIEWER (DVD VIDEO only): displays the first scene of each title.

• TRACK VIEWER (VIDEO C D/ Super VCD only): displays the first scene of each track.

1-8

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

T 17:30 128k

JAZZ RIVER SIDE

Viewing Information About the Disc

Checking the Playing Time and Remaining Time

You can check the playing time and remaining time of the current title, chapter, or track. Also, you can check the DVD/CD text, track name (MP3 audio), or file name (DivX video) recorded on the disc.

TIME/TEXT

1 Press TIME/TEXT during playback.

The following display appears.

T 1:01:57

Time information

2 Press TIME/TEXT repeatedly to

change the time information.

The available time information depends upon the type of disc you are playing.

◆ When playing a DVD

•T

(hours: minutes: seconds)

*:*:*

Playing time of the current title

•T–

*:*:*

Remaining time of the current title

•C

*:*:*

Playing time of the current chapter

•C–

*:*:*

Remaining time of the current chapter

◆ When playing a VIDEO CD or Super VCD (with PBC functions)

•

(minutes: seconds)

*:*

Playing time of the current scene

◆ When playing a VIDEO CD (without PBC functions) or CD

•T

(minutes: seconds)

*:*

Playing time of the current track

•T–

*:*

Remaining time of the current track

•D

*:*

Playing time of the current disc

•D–

*:*

Remaining time of the current disc

◆ When playing a Super VCD (without PBC functions)

•T

(minutes: seconds)

*:*

Playing time of the current track

◆ When playing a DATA CD (MP3 audio)/ DATA DVD (MP3 audio)

•T

(minutes: seconds)

*:*

Playing time of the current track

◆ When playing a DATA CD (DivX video)/ DATA DVD (DivX video)

•

(hours: minutes: seconds)

*:*:*

Playing time of the current file

Checking the play information of the disc

To check the DVD/CD text

Press TIME/TEXT repeatedly in step 2 to display text recorded on the DVD/CD. The DVD/CD text appears only when text is recorded in the disc. You cannot change the text. If the disc does not contain text, “NO TEXT” appears.

Viewing Information About the Disc

BRAHMS SYMPHONY

To check DATA CD/DATA DVD album name, etc.

By pressing TIME/TEXT while playing MP3 audio tracks or DivX video files on a DATA CD/DATA DVD, you can display the name of the album/track/file, and the audio bit rate (the amount of data per second of the current audio track) on your TV screen.

Album name

* Appears when:

– playing an MP3 audio track on a DATA CD/

DATA DVD.

– playing a DivX video file that contains MP3

audio on a DATA CD/DATA DVD.

Bit rate*

Track/file name

Checking the information on the front panel display

You can view the time information and text displayed on the TV screen also on the front panel display. The information on the front panel display changes as follows when you change the time information on your TV screen.

When playing a DVD

Playing time of the current title

Remaining time of the current title

Playing time of the current chapter

Remaining time of the current chapter

Text

Current title and chapter number

(returns to top automatically)

When playing a DATA CD (MP3 audio) or DATA DVD (MP3 audio)

Playing time and number of the current track

Track name

Current album and track number

(returns to top automatically)

When playing a DATA CD (DivX video) or DATA DVD (DivX video)

Playing time of the current file

The current file name

The current album and file number

(returns to top automatically)

,continued

When playing a VIDEO CD (without PBC functions) or CD

Playing time and number of the current track

Remaining time of the current track

Playing time of the disc

Remaining time of the disc

Text

z Hints

• When playing VIDEO CDs without PBC functions, the track number, and the index number are displayed after the text.

• When playing VIDEO CDs with PBC functions, the scene number, or the playing time are displayed.

• Long text that does not fit in a single line will scroll across the front panel display.

• You can also check the time information and text using the Control Menu (page 11).

Notes

• Depending on the type of disc being played, the DVD/CD text or track name may not be displayed.

• The player can only display the first level of the DVD/CD text, such as the disc name or title.

• Playing time of MP3 audio tracks and DivX video files may not be displayed correctly.

• If you play a disc containing JPEG image files only, “NO AUDIO DATA” appears when “MODE (MP3, JPEG)” is set to “AUTO,” “JPEG” appears when “MODE (MP3, JPEG)” is set to “IMAGE (JPEG)” in the front panel display.

Viewing Information About the Disc

Sound Adjustments

Changing the Sound

When playing a DVD VIDEO, DATA DVD (DivX video files), or DATA CD (DivX video files) recorded in multiple audio formats (PCM, Dolby Digital, or DTS), you can change the audio format. If the DVD VIDEO is recorded with multilingual tracks, you can also change the language. With CDs, DATA CDs, DATA DVDs, or VIDEO CDs, you can select the sound from either the right or left channel and listen to the sound of the selected channel through both the right and left speakers. For example, when playing a disc containing a song with the vocals on the right channel and the instruments on the left channel, you can hear the instruments from both speakers by selecting the left channel.

AUDIO

1 Press AUDIO during playback.

The following display appears.

1:ENGLISH DOLBY DIGITAL 3/2.1

2 Press AUDIO repeatedly to select

the desired audio signal.

◆ When playing a DVD VIDEO

Depending on the DVD VIDEO, the choice of language varies. When 4 digits are displayed, they indicate a language code. See “Language

Code List” on page 72 to see which language the code represents. When the same language is displayed two or more times, the DVD VIDEO is recorded in multiple audio formats.

◆ When playing in DVD-VR mode

The types of sound tracks recorded on a disc are displayed. The default setting is underlined. Example:

•1: MAIN

(main sound)

• 1: SUB (sub sound)

• 1: MAIN+SUB (main and sub sound)

◆ When playing a VIDEO CD, CD, DATA CD (MP3 audio), or DATA DVD (MP3 audio)

The default setting is underlined.

•STEREO

: the standard stereo sound

• 1/L: the sound of the left channel (monaural)

• 2/R: the sound of the right channel (monaural)

◆ When playing a DATA CD (DivX video)

or DATA DVD (DivX video)

Select one of the displayed audio signal formats. If “No audio data” appears, the player does not support the audio signal format contained in the disc.

◆ When playing a Super VCD

The default setting is underlined.

•1:STEREO

: the stereo sound of the

audio track 1

• 1:1/L: the sound of the left channel of the audio track 1 (monaural)

• 1:2/R: the sound of the right channel of the audio track 1 (monaural)

• 2:STEREO: the stereo sound of the audio track 2

• 2:1/L: the sound of the left channel of the audio track 2 (monaural)

• 2:2/R: the sound of the right channel of the audio track 2 (monaural)

Notes

• While playing a Super VCD on which the audio track 2 is not recorded, no sound will come out when you select “2:STEREO,” “2:1/L,” or “2:2/R.”

• When playing in DVD-VR mode: If you connect to an AV amplifier (receiver) using the DIGITAL OUT (COAXIAL) jack and want to switch between the sound tracks, set “DOLBY DIGITAL” to “D-PCM” in “AUDIO SETUP” (page 64).

1-9

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

)

Checking the audio signal format

You can check the audio signal format by pressing AUDIO repeatedly during playback. The format of the current audio signal (Dolby Digital, DTS, PCM, etc.) appears as shown below.

◆When playing a DVD VIDEO

Example:

Dolby Digital 5.1 ch

1:ENGLISH DOLBY DIGITAL

Front (L/R) + Center

Example:

Dolby Digital 3 ch

2:SPANISH DOLBY DIGITAL

Front (L/R)

◆When playing a DivX video file on a DATA CD or DATA DVD

Example:

MP3 audio

About audio signals

Audio signals recorded in a disc contain the sound elements (channels) shown below. Each channel is output from a separate speaker.

• Front (L)

• Front (R)

•Center

•Rear (L)

•Rear (R)

• Rear (Monaural): This signal can be either the Dolby Surround Sound processed signals or the Dolby Digital sound’s monaural rear audio signals.

• LFE (Low Frequency Effect) signal

Note

If “DTS” is set to “OFF” in “AUDIO SETUP” (page 65) the DTS track selection option will not appear on the screen even if the disc contains DTS tracks.

LFE (Low Frequency Effect)

1: MP3 128k

Bit rate

Rear (L/R

3 / 2 .1

2 / 1

Rear

(Monaural)

TV Virtual Surround Settings (TVS)

When you connect a stereo TV or 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV. This only works when playing a multichannel Dolby audio sound track. Furthermore, if the player is set up to output the signal from the DIGITAL OUT (COAXIAL) jack, the surround effect will only be heard when “DOLBY DIGITAL” is set to “D-PCM” in “AUDIO SETUP” (page 64).

SUR

1 Press SUR during playback.

The following display appears.

TVS DYNAMIC THEATER

2 Press SUR repeatedly to select

one of the TVS sounds.

See the explanations given for each item in the following section.

• TVS DYNAMIC THEATER

• TVS DYNAMIC

•TVS WIDE

• TVS NIGHT

• TVS STANDARD

,continued

To cancel the setting

Select “OFF” in step 2.

◆TVS DYNAMIC THEATER

Creates one set of LARGE virtual rear speakers and virtual subwoofer from the sound of the front speakers (L, R) without using actual rear speakers and subwoofer (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV.

Sub woofer

Sound Adjustments

◆TVS DYNAMIC

Creates one set of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV.

◆TVS WIDE

Creates five sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV.

◆TVS NIGHT

Large sounds, such as explosions, are suppressed, but the quieter sounds are unaffected. This feature is useful when you want to hear the dialog and enjoy the surround sound effects of “TVS WIDE” at low volume.

◆TVS STANDARD

Creates three sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). Use this setting when you want to use TVS with 2 separate speakers.

L R

L: Front speaker (left) R: Front speaker (right)

: Virtual speaker

Notes

• When the playing signal does not contain a signal for the rear speakers, the surround effects cannot be heard.

• When you select one of the TVS modes, turn off the surround setting of the connected TV or amplifier (receiver).

• Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings.

• Not all discs will respond to the “TVS NIGHT” function in the same way.

• The TVS effects do not work when using the Fast Play or Slow Play functions, even though you can change the TVS modes.

Enjoying Movies

Changing the Angles

If various angles (multi-angles) for a scene are recorded on the DVD VIDEO, “ ” appears in the front panel display. This means that you can change the viewing angle.

ANGLE

1 Press ANGLE during playback.

The number of the angle appears on the display.

2 Press ANGLE repeatedly to select

an angle number.

The scene changes to the selected angle.

Note

Depending on the DVD VIDEO, you may not be able to change the angles even if multi-angles are recorded on the DVD VIDEO.

Displaying the Subtitles

If subtitles are recorded on the discs, you can change the subtitles or turn them on and off whenever you want while playing the discs.

SUBTITLE

1 Press SUBTITLE during playback.

The following display appears.

1:ENGLISH

2 Press SUBTITLE repeatedly to

select a setting.

◆ When playing a DVD VIDEO

Select the language. Depending on the DVD VIDEO, the choice of language varies. When 4 digits are displayed, they indicate a language code. See “Language Code List” on page 72 to see which language the code represents.

◆ When playing in DVD-VR mode

Select “ON.”

◆ When playing a DATA CD (DivX video) or DATA DVD (DivX video)

Select the displayed language.

To turn off the subtitles

Select “OFF” in step 2.

,continued

Enjoying Movies

Notes

• Depending on the DVD VIDEO, you may not be able to change the subtitles even if multilingual subtitles are recorded on it. You also may not be able to turn them off.

• You can change the subtitles if the DivX video file has an “.AVI” or “.DIVX” extension and contains subtitle information with in the same file.

• While playing a disc with subtitles, the subtitle may disappear when you press FAST PLAY or SLOW PLAY button.

Adjusting the Playback Picture (CUSTOM PICTURE MODE)

You can adjust the video signal of the DVD, VIDEO CD, DATA CD/DATA DVD in JPEG format, or DATA CD/DATA DVD containing DivX video files from the player to obtain the picture quality you want. Choose the setting that best suits the program you are watching. When you select “MEMORY,” you can make further adjustments to each element of the picture (color, brightness, etc.).

ENTER

RETURN

DISPLAY

1 Press DISPLAY during playback

(When playing a DATA CD or DATA DVD with JPEG image files, press twice).

The Control Menu appears.

2 Press X/x to select

(CUSTOM PICTURE MODE), then press ENTER.

The options for “CUSTOM PICTURE MODE” appear.

)

1 2 (2 7 1 8 (3 4 T

1 : 3 2 : 5 5

STANDARD

STANDARD DYNAMIC 1

)

DVD VIDEO

1-10

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

3 Press X/x to select the setting you

want.

The default setting is underlined.

•

STANDARD:

• DYNAMIC 1: produces a bold

• DYNAMIC 2: produces a more

• CINEMA 1: enhances details in dark

• CINEMA 2: white colors become

• MEMORY: adjusts the picture in

displays a standard picture.

dynamic picture by increasing the picture contrast and the color intensity.

dynamic picture than DYNAMIC 1 by further increasing the picture contrast and color intensity.

areas by increasing the black level.

brighter and black colors become richer, and the color contrast is increased.

greater detail.

4 Press ENTER.

The selected setting takes effect.

z Hint

When you watch a movie, “CINEMA 1” or “CINEMA 2” is recommended.

Adjusting the picture items in “MEMORY”

You can adjust each element of the picture individually.

• PICTURE: changes the contrast

• BRIGHTNESS: changes the overall brightness

• COLOR: makes the colors deeper or lighter

• HUE: changes the color balance

1 In step 3 of “Adjusting the Playback

Picture,” select “MEMORY” and press ENTER.

The “PICTURE” adjustment bar appears.

2 Press C/c to adjust the picture

contrast.

To go to the next or previous picture item without saving the current setting, press X/x.

3 Press ENTER.

The adjustment is saved, and “BRIGHTNESS” adjustment bar appears.

4 Repeat step 2 and 3 to adjust

“BRIGHTNESS,” “COLOR,” and “HUE.”

To turn off the display

Press O RETURN or DISPLAY.

Enjoying Movies

Sharpening the Picture

(SHARPNESS)

You can enhance the outlines of images to produce a sharper picture.

ENTER

DISPLAY

1 Press DISPLAY during playback

(When playing a DATA CD or DATA DVD with JPEG image files, press twice).

The Control Menu appears.

2 Press X/x to select

(SHARPNESS), then press ENTER.

The options for “SHARPNESS” appear.

)

1 2 (2 7 1 8 (3 4 T

OFF 1 2 OFF

)

1 : 3 2 : 5 5

DVD VIDEO

4 Press ENTER.

The selected setting takes effect.

To cancel the “SHARPNESS” setting

Select “OFF” in step 3.

PICTURE

Enjoying MP3 Audio and JPEG Images

About MP3 Audio Tracks and JPEG Image Files

MP3 is audio compression technology that satisfies the ISO/IEC MPEG regulations. JPEG is image compression technology. You can play DATA CDs/DATA DVDs that contain MP3 audio tracks or JPEG image files.

DATA CDs/DATA DVDs that the player can play

You can play back DATA CDs or DATA DVDs recorded in MP3 (MPEG-1 Audio Layer III) and JPEG format. However, this player only plays DATA CDs whose logical format is ISO 9660 Level 1/ Level 2 or Joliet, and DATA DVDs of Universal Disk Format (UDF). Refer to the instructions supplied with the disc drives and the recording software (not supplied) for details on the recording format.

Note

The player may not be able to play some DATA CDs/DATA DVDs created in the Packet Write format.

MP3 audio track or JPEG image file that the player can play

The player can play the following tracks and files: – MP3 audio tracks with the extension

“.MP3.”

– JPEG image files with the extension

“.JPEG” or “.JPG.”

– JPEG image files that conform to the DCF*

image file format.

* “Design rule for Camera File system”: Image

standards for digital cameras regulated by JEITA (Japan Electronics and Information Technology Industries Association).

Notes

• The player will play any data with the extension “.MP3,” “.JPG,” or “.JPEG,” even if they are not in MP3 or JPEG format. Playing these data may generate a loud noise which could damage your speaker system.

• The player does not conform to audio tracks in mp3PRO format.

• Some JPEG files cannot be played.

• You cannot play MP3 audio tracks/JPEG image files in DATA CDs/DATA DVDs that contain DivX video files.

About playback order of albums, tracks, and files

Albums play in the following order:

◆Structure of disc contents

Tree 1 Tree 2 Tr ee 3 Tree 4 Tree 5

ROOT

Album

Track or file

3 Press X/x to select a level.

• 1: enhances the outline.

• 2: enhances the outline more than 1.

Enjoying MP3 Audio and JPEG Images

When you insert a DATA CD/DATA DVD and press H, the numbered tracks (or files) are played sequentially, from 1 through 7. Any sub-albums/tracks (or files) contained within a currently selected album take priority over the next album in the same tree. (Example: C contains D so 4 is played before 5.)

When you press MENU and the list of album names appears (page 47), the album names are arranged in the following order: A t Bt C t Dt F t G. Albums that do not contain tracks (or files) (such as album E) do not appear in the list.

z Hints

• If you add numbers (01, 02, 03, etc.) to the front of the track/file names when you store the tracks (or files) in a disc, the tracks and files will be played in that order.

• Since a disc with many trees takes longer to start playback, it is recommended that you create albums with no more than two trees.

Notes

• Depending on the software you use to create the DATA CD/DATA DVD, the playback order may differ from the above illustration.

• The playback order above may not be applicable if there are more than 200 albums and 300 tracks/ files in each album.

• The player can recognize up to 200 albums (the player will count just albums, including al bums that do not contain MP3 audio tracks and JPEG image files). The player will not play any albums beyond the 200th album.

• Proceeding to the next or another album may take some time.

Playing MP3 Audio Tracks or JPEG Image Files

You can play MP3 audio tracks and JPEG image files on DATA CDs or DATA DVDs.

PICTURE

CLEAR

RETURN

ZOOM

z Hint

You can view the disc information while playin g MP3 audio tracks (page 35).

Notes

• DATA CDs recorded in KODAK Picture CD format automatically start playing when inserted.

• If no MP3 audio track or JPEG image file is recorded on the DATA CD/DATA DVD, “No audio data” or “No image data” appears on the screen.

NAVI MENU ENTER

SUBTITLE

,continued

1-11

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

Selecting an album

1 Press MENU.

The list of albums on the disc appears. When an album is being played, its title is shaded.

)

1 (3 0

ROCK BEST HIT KARAOKE JAZZ R&B MY FAVORITE SONGS CLASSICAL SALSA OF CUBA BOSSANOVA

2 Press X/x to select the album you

want to play.

3 Press H.

Playback starts from the selected album. To select MP3 audio tracks, see “Selecting an MP3 audio track” (page 47). To select JPEG image files, see “Selecting a JPEG image file” (page 48).

To stop playback

Press x.

To go to the next or previous page

Press c or C.

To turn on or off the display

Press MENU repeatedly.

z Hint

Of the selected album, you can select to play only the MP3 audio tracks, JPEG image files, or bot h, by setting “MODE (MP3, JPEG)” (page 50).

Selecting an MP3 audio track

1 After step 2 of “Selecting an album,”

press ENTER.

The list of tracks in the album appears.

J A Z Z

)

1 ( 9 0

01SHE IS SPECIAL 02ALL YOU NEED IS ... 03SPICY LIFE 04HAPPY HOUR 05RIVER SIDE 06 5 07TAKE TIME,TAKE TIME

2 Press X/x to select a track, and press

ENTER.

Playback starts from the selected track.

To stop playback

Press x.

To go to the next or previous page

Press c or C.

To return to the previous display

Press O RETURN.

To go to the next or previous MP3 audio track

Press > or . during playback. You can select the first track of the next album by pressing > during playback of the last track of the current album. Note that you cannot return to the previous album by using ., and that you need to select the previous album from the album list.

Selecting a JPEG image file

1 After step 2 of “Selecting an album,”

press PICTURE NAVI.

The image files in the album appear in 16 subscreens. A scroll box is displayed on the right.

1234

5678

9101112

13 14 15 16

To display additional images, select a bottom image and press x. To return to a previous image, select a top image and press X.

Enjoying MP3 Audio and JPEG Images

2 Press C/X/x/c to select the image you

want to view, and press ENTER.

The selected image appears. Example

To go to the next or previous JPEG image file

Press C or c during playback. You can select the first file of the next album by pressing c during playback of the last file of the current album. Note that you cannot return to the previous album by using C, and that you need to select the previous album from the album list.

To rotate a JPEG image

Press X/x while viewing the image. Each time you press X, the image rotates counterclockwise by 90 degrees. To return to normal view, press CLEAR. Note that the view also returns to normal if you press C/c to go to the next or previous image. Example: when X is pressed once.

Rotation direction

To magnify a JPEG image (ZOOM)

Press ZOOM while viewing the image. You can enlarge the image up to four times the original size, and scroll using C/X/x/c. To return to normal view, press CLEAR.

◆When pressed once (x2)

The image enlarges twice the original size.

◆When pressed twice (x4)

The image enlarges four times the original size.

To display JPEG image information

Press SUBTITLE while viewing JPEG image files. The file name, camera maker/model, date, time, picture resolution, file size, camera setting information (ISO speed rating, Exposure time, F Number, Exposure bias, or Focal length) of the picture are displayed on the screen.

is displayed when the picture was taken

using flash.

is displayed when the image is automatically rotated. To hide the information, press Note that the above information may not appear depending on the digital camera.

SUBTITLE.

To stop viewing the JPEG image

Press x.

z Hints

• While viewing JPEG image files, you can set options such as “INTERVAL” (page 50), “EFFECT” (page 51), and “SHARPNESS” (page 44).

• You can view JPEG images files without MP3 audio by setting “MODE (MP3, JPEG)” to “IMAGE (JPEG)” (page 50).

• The date the picture was taken is displayed beside “DATE” in the Control Menu (page 11). Note that no date may appear depending on the digital camera.

Note

PICTURE NAVI does not work if “AUDIO (MP3)” is selected in “MODE (MP3, JPEG)” (page 50).

,continued

Enjoying JPEG Images as a Slide Show

You can play JPEG image files on a DATA CD or DATA DVD successively as a slide show.

ENTER DISPLAY

1 Press MENU.

The list of albums on the DATA CD/ DATA DVD appears.

)

1 (3 0

ROCK BEST HIT KARAOKE JAZZ R&B MY FAVORITE SONGS CLASSICAL SALSA OF CUBA BOSSANOVA

2 Press X/x to select an album. 3 Press H.

The JPEG images in the selected album start playing as a slide show.

To stop playback

Press x.

Notes

• The slide show stops when X/x or ZOOM is

pressed.To resume the slide show, press H.

• This function does not work if “MODE (MP3, JPEG)” is set to “AUDIO (MP3)” (page 50).

,continued

Enjoying MP3 Audio and JPEG Images

Viewing a slide show with sound (MODE (MP3, JPEG))

When JPEG image files and MP3 audio tracks are placed in the same album, you can enjoy a slide show with sound.

1 Press DISPLAY during stop mode.

The Control Menu appears.

2 Press X/x to select (MODE

(MP3, JPEG)), and press ENTER.

The options for “MODE (MP3, JPEG)” appear.

)

1 2 (2 7

)

1 8 (3 4 T

3 2 : 5 5 AUTO AUTO AUDIO (MP3) IMAGE (JPEG)

3 Press X/x to select “AUTO” (default),

and press ENTER.

• AUTO: plays both the JPEG image files and MP3 audio tracks in the same album as a slide show.

• AUDIO (MP3): plays only MP3 audio tracks continuously.

• IMAGE (JPEG): plays only JPEG image files continuously.

4 Press MENU.

The list of albums on the DATA CD/ DATA DVD appears.

1 (3 0

ROCK BEST HIT KARAOKE JAZZ R&B MY FAVORITE SONGS CLASSICAL SALSA OF CUBA BOSSANOVA

5 Press X/x to select the album that

contains both the MP3 audio tracks and JPEG images you want to play.

6 Press H.

A slide show starts with sound.

DATA CD

)

z Hints

• To repeat both MP3 audio tracks and JPEG image files in a single album, repeat the sa me MP3 audio track or album when “MODE (MP3, JPEG)” is set to “AUTO.” See “Playing repeatedly (Repeat Play)” (page 29) to repeat the track or album .

• The player recognizes a maximum of 200 albums regardless of the selected mode. Of each album, the player recognizes up to 300 MP3 audio tracks and 300 JPEG image files when “AUTO” is selected, 600 MP3 audio tracks when “AUDIO (MP3)” is selected, 600 JPEG image files when “IMAGE (JPEG)” is selected.

Notes

• This function does not work if the MP3 audio tracks and JPEG image files are not placed in the

MP3

same album.

• If playing time of JPEG image or MP3 audio is longer than the other, the longer one conti nues without sound or image.

• If you play large MP3 track data and JPEG image data at the same time, the sound may skip. It is recommended that you set the MP3 bit rate to 128 kbps or lower when creating the file. If the sound still skips, then reduce the size of the JPEG file.

Setting the pace for a slide show (INTERVAL)

You can set the time the slides are displayed on the screen.

1 Press DISPLAY twice while viewing a

JPEG image or when the player is in stop mode.

The Control Menu appears.

2 Press X/x to select

(INTERVAL), then press ENTER.

The options for “INTERVAL” appear.

1 2)

3 (

1( 1 0 / 2 9 / 2 0 0 7 NORMAL NORMAL FAST SLOW 1 SLOW 2

3 Press X/x to select a setting.

The default setting is underlined.

• NORMAL

: sets the duration to between

6 to 9 seconds.

• FAST: sets a duration shorter than NORMAL.

DATA CD

JPEG

1-12

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

• SLOW 1: sets a duration longer than NORMAL.

• SLOW 2: sets a duration longer than SLOW 1.

4 Press ENTER.

Note

Some JPEG files, especially progressive JPEG files or JPEG files of 3,000,000 pixels or more, may take longer to display than others, which may make th e duration seem longer than the setting you selected.

Selecting the slides’ appearance (EFFECT)

You can select the way the slides are displayed during a slide show.

1 Press DISPLAY twice while viewing a

JPEG image or when the player is in stop mode.

2 Press X/x to select (EFFECT),

then press ENTER.

The options for “EFFECT” appear.

1 2)

3 (

1 0 / 2 9 / 2 0 0 7

MODE 1 MODE 1 MODE 2 MODE 3 MODE 4 MODE 5 OFF

3 Press X/x to select a setting.

The default setting is underlined.

•MODE 1

: the image sweeps in from top

to bottom.

• MO DE 2: the image sweeps in from left to right.

• MODE 3: the image stretches out from the center of the screen.

• MODE 4: the images randomly cycle through the effects.

• MO DE 5: the next image slides over the previous image.

• OFF: turns off this function.

DATA CD

JPEG

4 Press ENTER.

Enjoying DivX® Videos

About DivX Video Files

DivX® is a video file compression technology, developed by DivX, Inc. This product is an official DivX product. You can play DATA CDs and DATA DVDs that contain DivX video files.

DATA CDs and DATA DVDs that the player can play

Playback of DATA CDs and DATA DVDs on this player is subject to certain conditions: – With DATA CDs/DATA DVDs that

contain DivX video files in addition to MP3 audio tracks or JPEG image files, the player

Enjoying MP3 Audio and JPEG Images

plays only the DivX video files. However, this player only plays DATA CDs whose logical format is ISO 9660 Level 1/ Level 2 or Joliet, and DATA DVDs of Universal Disk Format (UDF). Refer to the instructions supplied with the disc drives and the recording software (not supplied) for details on the recording format.

About playback order of data on DATA CDs or DATA DVDs

See “About playback order of albums, tracks, and files” (page 45). Note that the playback order may not be applicable, depending on the software used for creating the DivX video file, or if there are more than 200 albums and 600 DivX video files in each album.

Note

The player may not be able to play some DATA CDs/DATA DVDs created in the Packet Write format.

Certified

DivX video files that the player can play

The player can play data that is recorded in DivX format, and which has the extension “.AVI” or “.DIVX.” The player will not play files with the extension “.AVI” or “.DIVX” if they do not contain a DivX video.

z Hint

For details about playable MP3 audio tracks or JPEG image files on DATA CDs/DATA DVDs, see “DATA CDs/DATA DVDs that the player can play” (page 45).

Notes

• The player may not play a DivX video file when the file has been combined from two or more DivX video files.

• The player cannot play a DivX video file of size more than 720 (width) × 576 (height)/2 GB .

• Depending on the DivX video file, the picture may be unclear or the sound may skip.

• The player cannot play some DivX video files that are longer than 3 hours.

Playing DivX Video Files

You can play DivX video files on DATA CDs and DATA DVDs.

RETURN

z Hint

You can view the disc information while playing a DivX video file (page 35).

Notes

• If there are no DivX video files recorded on the DATA CD/DATA DVD, a message appears to indicate that the disc is not playable.

• Depending on the DivX video file, the picture may pause or be unclear. In which case, it is recommended that you create the file at a lower bit rate. If the sound is still noisy, MP3 is the recommended audio format. Note, however, this player does not conform to WMA (Windows Media Audio) format.

• Because of the compression technology used for DivX video files, it may take some time after you press H (play) for the picture to appear.

• Depending on the DivX video file, the sound may not match the pictures on the screen.

ENTER

Selecting an album

1 Press MENU.

A list of albums on the disc appears. Only albums that contain DivX video files are listed.

)

3 (3

SUMMER 2003 NEW YEAR'S DAY MY FAVOURITES

2 Press X/x to select the album you

want to play.

3 Press H.

Playback starts from the selected album. To select DivX video files, see “Selecting a DivX video file” (page 54).

To stop playback

Press x.

To go to the next or previous page

Press C or c.

To turn the display on or off

Press MENU repeatedly.

Enjoying DivX

Videos

Selecting a DivX video file

1 After step 2 of “Selecting an album,”

press ENTER.

The list of files in the album appears.

M Y FAVOURITES

)

1 ( 2

MATRIX VENUS

2 Press X/x to select a file, and press

ENTER.

The selected file starts playing.

To stop playback

Press x.

To go to the next or previous page

Press C or c.

To return to the previous display

Press O RETURN.

To go to the next or previous DivX video file without turning on the above file list

You can select the next or previous DivX video file in the same album by pressing > or .. You can also select the first file of the next album by pressing > during playback of the last file of the current album. Note that you cannot return to the previous album by using .. To return to the previous album, select it from the album list.

z Hint

If the number of viewing times is preset, you can play the DivX video files as many times as the preset number. The following occurrences are counted: – when the player is turned off. This includes when

the player is automatically turned off by the Auto Power Off function. Press X instead of x when

you want to stop viewing. – when the disc tray is opened. – when another file is played.

,continued

1-13

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

Using Various Additional Functions

Locking Discs (CUSTOM

PARENTAL CONTROL, PARENTAL

CONTROL)

You can set two kinds of playback restrictions for a disc.

• Custom Parental Control You can set playback restrictions so that the player will not play inappropriate discs.

• Parental Control Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users. Scenes may be blocked or replaced with different scenes.

The same password is used for both Parental Control and Custom Parental Control.

Number buttons

ENTER

DISPLA

Custom Parental Control

You can set the same Custom Parental Control password for up to 40 discs. When you set the 41st-disc, the first disc is canceled.

1 Insert the disc you want to lock.

If the disc is playing, press x to stop playback.

2 Press DISPLAY while the player is in

stop mode.

The Control Menu appears.

3 Press X/x to select

(PARENTAL CONTROL), then press ENTER.

The options for “PARENTAL CONTROL” appear.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5

ON PLAYER PASSWORD OFF

4 Press X/x to select “ON t,” then

press ENTER.

◆ If you have not entered a password

The display for registering a new password appears.

PARENTAL CONTROL

Enter a new 4-digit password,

then press

Enter a 4-digit password using the number buttons, then press ENTER. The display for confirming the password appears.

◆ When you have already registered a password

The display for entering the password appears.

5 Enter or re-enter your 4-digit password

using the number buttons, then press ENTER.

“Custom parental control is set.” appears and then the screen returns to the Control Menu.

To turn off the Custom Parental Control function

1 Follow steps 1 to 3 of “Custom Parental

Control.”

2 Press X/x to select “OFF t,” then press

ENTER.

3 Enter your 4-digit password using the

number buttons, then press ENTER.

STOP DVD VIDEO

ENTER

,continued

Using Various Additional Functions

To play a disc for which Custom Parental Control is set

1 Insert the disc for which Custom Parental

Control is set. The “CUSTOM PARENTAL CONTROL” display appears.

CUSTOM PARENTAL CONTROL

Custom parental control is already set. To play, enter your password

ENTER

and press

2 Enter your 4-digit password using the

number buttons, then press ENTER. The player is ready for playback.

z Hint

If you forget your password, enter the 6-digit number “199703” using the number buttons when the “CUSTOM PARENTAL CONTROL” display asks you for your password, then press ENTER. The display will ask you to enter a new 4-digit password.

Parental Control (limited playback)

Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users. The “PARENTAL CONTROL” function allows you to set a playback limitation level.

1 Press DISPLAY while the player is in

stop mode.

The Control Menu appears.

2 Press X/x to select

(PARENTAL CONTROL), then press ENTER.

The options for “PARENTAL CONTROL” appear.

)

1 2 (2 7

)

1 8 (3 4 T

1 : 3 2 : 5 5

ON PLAYER PASSWORD OFF

STOP DVD VIDEO

3 Press X/x to select “PLAYER t,”

then press ENTER.

◆ If you have not entered a password

The display for registering a new password appears.

PARENTAL CONTROL

Enter a new 4-digit password,

ENTER

then press

Enter a 4-digit password using the number buttons, then press ENTER. The display for confirming the password appears.

◆ When you have already registered a password

The display for entering the password appears.

4 Enter or re-enter your 4-digit password

using the number buttons, then press ENTER.

The display for setting the playback limitation level appears.

PARENTAL CONTROL

LEVEL: OFF STANDARD:

5 Press X/x to select “STANDARD,”

then press ENTER.

The selection items for “STANDARD” are displayed.

PARENTAL CONTROL

LEVEL: OFF STANDARD:

OTHERS

USA

USA USA

6 Press X/x to select a geographic area

as the playback limitation level, then press ENTER.

The area is selected. When you select “OTHERS t,” select and enter a standard code in the table on page 72 using the number buttons.

7 Press X/x to select “LEVEL,” then

press ENTER.

The selection items for “LEVEL” are displayed.

PARENTAL CONTROL

LEVEL: OFF STANDARD:

8 Select the level you want using X/x,

then press ENTER.

Parental Control setting is complete.

PARENTAL CONTROL

LEVEL: STANDARD: USA

The lower the value, the stricter the limitation.

To turn off the Parental Control function

Set “LEVEL” to “OFF” in step 8.

To play a disc for which Parental Control is set

1 Insert the disc and press H .

The display for entering your password appears.

2 Enter your 4-digit password using the

number buttons, then press ENTER. The player starts playback.

NC17

7: 6: 5:

4: PG13

OFF

z Hint

If you forget your password, remove the disc and repeat steps 1 to 3 of “Parental Control (li mited playback).” When you are asked to enter your password, enter “199703” using the number buttons, then press ENTER. The display will ask you to enter a new 4-digit password. After you enter a new 4-digit password, replace the disc in the player and press H. When the display for entering your password appears, enter your new password.

Notes

• When you play discs which do not have the Parental Control function, playback cannot be limited on this player.

• Depending on the disc, you may be asked to change the parental control level while playing the disc. In this case, enter your password, then change the level. If the Resume Play mode is canceled, the level returns to the previous level.

Changing the password

1 Press DISPLAY while the player is in

stop mode.

The Control Menu appears.

2 Press X/x to select

(PARENTAL CONTROL), then press ENTER.

The options for “PARENTAL CONTROL” appear.

3 Press X/x to select “PASSWORD

t,” then press ENTER.

The display for entering the password appears.

4 Enter your 4-digit password using the

number buttons, then press ENTER.

5 Enter a new 4-digit password using the

number buttons, then press ENTER.

6 To confirm your password, re-enter it

using the number buttons, then press ENTER.

If you make a mistake entering your password

Press C before you press ENTER and input the correct number.

Using Various Additional Functions

Controlling Your TV with the Supplied Remote

You can control the sound level, input source, and power switch of your Sony TV with the supplied remote.

Number buttons

You can control your TV using the buttons below.

By pressing You can

TV [/1 Turn the TV on or off

VOL +/– Adjust the volume of the TV

TV/VIDEO Switch the TV’s input source

Note

Depending on the connected unit, you may not be able to control your TV using all or some of th e buttons on the supplied remote.

between the TV and other input sources

VOL +/–

TV/VIDE

Controlling other TVs with the remote

You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer’s code.

1 While holding down TV [/1, press the

number buttons to select your TV’s manufacturer’s code (see the table below).

2 Release TV [/1.

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer Code number

Sony 01 (default)

Daewoo 04, 22

Hitachi 02, 04

JVC 09

LG/Goldstar 04

MGA/Mitsubishi 04, 13

Panasonic 19

Philips 21

RCA 04, 10

Samsung 04, 20

Sharp 18

Toshiba 07, 18

Notes

• When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

• Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote.

1-14

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

Settings and Adjustments

Using the Setup Display

By using the Setup Display, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup Display, among other things. For details on each Setup Display item, see pages from 60 to 65.

Note

Playback settings stored in the disc take pr iority over the Setup Display settings and not all of the functions described may work.

Number buttons

ENTER

DISPLAY

1 Press DISPLAY when the player is

in stop mode.

The Control Menu appears.

2 Press X/x to select

(SETUP), then press ENTER.

The options for “SETUP” appear.

(47)

QUICK CUSTOM RESET QUICK

STOP DVD VIDEO

3 Press X/x to select “CUSTOM,”

then press ENTER.

The Setup Display appears.

LANGUAGE SETUP

OSD: MENU: AUDIO: SUBTITLE:

ENGLISH ENGLISH

ORIGINAL

ENGLISH

4 Press X/x to select the setup item

from the displayed list: “LANGUAGE SETUP,” “SCREEN SETUP,” “CUSTOM SETUP,” or “AUDIO SETUP.” Then press ENTER.

The Setup item is selected. Example: “SCREEN SETUP”

Selected item

SCREEN SETUP

TV TYPE: SCREEN SAVER: BACKGROUND:

BLACK LEVEL: BLACK LEVEL PROGRESSIVE MODE 4:3 OUTPUT:

Setup items

(PROGRESSIVE)

4:3 LETTER BOX

JACKET PICTURE

(COMPONENT OUT)

OFF

AUTO FULL

5 Press X/x to select an item, then

press ENTER.

The options for the selected item appear. Example: “TV TYPE”

SCREEN SETUP

TV TYPE: SCREEN SAVER: BACKGROUND: BLACK LEVEL: BLACK LEVEL PROGRESSIVE MODE 4:3 OUTPUT:

(PROGRESSIVE)

4:3 LETTER BOX 4:3 LETTER BOX

(COMPONENT OUT)

4:3 PAN SCAN

16:9 OFF

OFF

AUTO

FULL

Options

6 Press X/x to select a setting, then

press ENTER.

The setting is selected and setup is complete. Example: “16:9”

SCREEN SETUP

TV TYPE: SCREEN SAVER: BACKGROUND:

BLACK LEVEL: BLACK LEVEL PROGRESSIVE MODE 4:3 OUTPUT:

To enter the Quick Setup mode

Select “QUICK” in step 3. Follow from step 5 of the Quick Setup explanation to make basic adjustments (page 19).

To reset all of the “SETUP” settings

1 Select “RESET” in step 3 and press

ENTER.

2 Select “YES” using X/x.

You can also quit the process and return to the Control Menu by selecting “NO”

Settings and Adjustments

here.

3 Press ENTER.

All the settings explained on pages 60 to 65 return to the default settings. Do not press [/1 while resetting the player, which takes a few seconds to complete.

(PROGRESSIVE)

Selected setting

JACKET PICTURE

(COMPONENT OUT)

AUTO

Setting the Display or Sound Track Language

(LANGUAGE SETUP)

“LANGUAGE SETUP” allows you to set various languages for the on-screen display or

16:9

sound track.

Select “LANGUAGE SETUP” in the Setup

OFF

Display. To use the display, see “Using the

OFF

Setup Display” (page 59).

FULL

◆ OSD (On-Screen Display)

Switches the display language on the screen.

◆ MENU (DVD VIDEO only)

You can select the desired language for the disc’s menu.

◆ AUDIO (DVD VIDEO only)

Switches the language of the sound track. When you select “ORIGINAL,” the language given priority in the disc is selected.

◆ SUBTITLE (DVD VIDEO only)

Switches the language of the subtitle recorded on the DVD VIDEO. When you select “AUDIO FOLLOW,” the language for the subtitles changes according to the language you selected for the sound track.

z Hint

If you select “OTHERS t” in “MENU,” “SUBTITLE,” or “AUDIO,” select and enter a language code from “Language Code List” on page 72 using the number buttons.

Note

If you select a language in “MENU,” “SUBTITLE,” or “AUDIO” that is not recorded on a DVD VIDEO, one of the recorded languages will be automatically selected.

LANGUAGE SETUP

OSD: MENU: AUDIO: SUBTITLE:

ENGLISH ENGLISH

ORIGINAL

ENGLISH

Settings for the Display

(SCREEN SETUP)

Choose settings according to the TV to be connected.

Select “SCREEN SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 59). The default settings are underlined.

SCREEN SETUP

TV TYPE: SCREEN SAVER: BACKGROUND:

BLACK LEVEL: BLACK LEVEL PROGRESSIVE MODE

4:3 OUTPUT:

◆ TV TYPE

Selects the aspect ratio of the connected TV (4:3 standard or wide).

4:3 LETTER BOX

4:3 PAN SCAN

16:9 Select this when you connect a

Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen.

Select this when you connect a 4:3 screen TV. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.

wide-screen TV or a TV with a wide mode function.

4:3 LETTER BOX

4:3 PAN SCAN

16:9

(PROGRESSIVE)

4:3 LETTER BOX

JACKET PICTURE

(COMPONENT OUT)

AUTO

FULL

Note

Depending on the DVD, “4:3 LETTER BOX” may be selected automatically instead of “4:3 PAN SCAN” or vice versa.

◆ SCREEN SAVER

The screen saver image appears when you leave the player in pause or stop mode for 15 minutes, or when you play a CD, or DATA CD (MP3 audio)/DATA DVD (MP3 audio) for more than 15 minutes. The screen saver will help prevent your display device from becoming damaged (ghosting). Press H to turn off the screen saver.

ON Turns on the screen saver.

OFF Turns off the screen saver.

OFF OFF

◆ BACKGROUND

Selects the background color or picture on the TV screen when the player is in stop mode or while playing a CD, or DATA CD (MP3 audio)/DATA DVD (MP3 audio).

JACKET

The jacket picture (still picture)

PICTURE

appears, but only when the jacket picture is already recorded on the disc (CDEXTRA, etc.). If the disc does not contain a jacket picture, the “GRAPHICS” picture appears.

GRAPHICS A preset picture stored in the

player appears.

BLUE T he background color is blue.

BLACK The background color is black.

◆ BLACK LEVEL

Selects the black level (setup level) for the video signals output from the jacks other than COMPONENT VIDEO OUT.

Sets the black level of the

output signal to the standard level.

OFF Lowers the standard black

level. Use this when the picture becomes too white.

,continued

Settings and Adjustments

◆ BLACK LEVEL (COMPONENT OUT)

Selects the black level (setup level) for the video signals output from the COMPONENT VIDEO OUT jacks. You cannot select this when the player outputs progressive signals (page 15).

OFF Sets the black level of the

output signal to the standard level. Normally select this position.

ON Raises the standard black level.

Use this setting when the picture appears too dark.

◆ PROGRESSIVE (COMPONENT OUT)

If your TV accepts progressive (480p) format signals, set “PROGRESSIVE (COMPONENT OUT)” to “ON”. Note that you must connect to a progressive format TV using the COMPONENT VIDEO OUT jacks (page 15).

To output normal (interlace)

OFF

signals.

ON To output progressive signals.

To output progressive signals

1 Select “PROGRESSIVE

(COMPONENT OUT),” and press ENTER.

2 Select “ON,” and press ENTER.

The display asks for confirmation.

3 Select “Start” and press ENTER.

The video switches to a progressive signal for 5 seconds.

4 If the picture appears normal, select

“YES,” and press ENTER. If not, select “NO,” and press ENTER.

To reset the setting

If the picture does not appear normal or goes blank, press

[/1 to turn off the player, and

enter “369” using the number buttons on the remote, then press again.

[/1 to turn on the player

◆ MODE (PROGRESSIVE)

In order for these images to appear natural on your screen when output in progressive mode, the progressive video signal needs to be converted to match the type of DVD software that you are watching. This setting is effective only when you set “PROGRESSIVE (COMPONENT OUT)” in “SCREEN SETUP” to “ON.”

AUTO Automatically detects the

software type (film-based or video-based) and selects the appropriate conversion mode. Normally, select this position.

VIDEO Fixes the conversion mode to

the mode for video-based software.

◆ 4:3 OUTPUT

This setting is effective only when you set “TV TYPE” in “SCREEN SETUP” to “16:9.” Adjust this to watch 4:3 aspect ratio progressive signals. If you can change the aspect ratio on your progressive format (480p) compatible TV, change the setting on your TV, not the player. This setting is effective only when you set “PROGRESSIVE (COMPONENT OUT)” in “SCREEN SETUP” to “ON.”

Select this when you can

FULL

change the aspect ratio on your TV.

NORMAL Select this when you cannot

change the aspect ratio on your TV. Shows a 16:9 aspect ratio signal with black bands on left and right sides of the image.

16:9 aspect ratio TV

,continued

1-15

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

Custom Settings (CUSTOM

SETUP)

Use this to set up playback related and other settings.

Select “CUSTOM SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 59). The default settings are underlined.

◆ AUTO POWER OFF

Switches the Auto Power Off setting on or off.

◆ AUTO PLAY

Switches the Auto Play setting on or off. This function is useful when the player is connected to a timer (not supplied).

◆ DIMMER

Adjusts the lighting of the front panel display.

◆ PAUSE MODE (DVDs only)

Selects the picture in pause mode.

CUSTOM SETUP

AUTO POWER OFF: AUTO PLAY: DIMMER: PAUSE MODE:

TRACK SELECTION:

MULTI-DISC RESUME: DivX:

OFF Switches this function off.

ON The player enters standby mode

when left in stop mode for more than 30 minutes.

Switches this function off.

OFF

ON Automatically starts playback

when the player is turned on by a timer (not supplied).

Makes the lighting bright.

BRIGHT

DARK Makes the lighting dark.

The picture, including subjects

AUTO

that move dynamically, is output with no jitter. Normally select this position.

FRAME The picture, including subjects

that do not move dynamically, is output in high resolution.

BRIGHT

Registration Code

AUTO

OFF OFF

OFF

◆ TRACK SELECTION (DVD VIDEO only)

Gives the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, DTS, or Dolby Digital format) are recorded.

OFF No priority given.

AUTO Priority given.

Notes

• When you set the item to “AUTO,” the language may change. The “TRACK SELECTION” setting has higher priority than the “AUDIO” settings in “LANGUAGE SETUP” (page 60).

• If you set “DTS” to “OFF” (page 65), the DTS

sound track is not played even if you set “TRACK SELECTION” to “AUTO.”

• If PCM, DTS, and Dolby Digital sound tracks have the same number of channels, the player selects PCM, DTS, and Dolby Digital sound tracks in this order.

◆ MULTI-DISC RESUME (DVD VIDEO/

VIDEO CD only)

Switches the Multi-disc Resume setting on or off. Resume playback can be stored in memory for up to 6 different DVD VIDEOs/ VIDEO CDs (page 23).

Stores the resume setting in memory for up to six discs.

OFF Does not store the resume

setting in memory. Playback restarts at the resume point only for the current disc in the player.

Note

If you run Quick Setup, Multi-disc Resume setti ng stored in memory may return to the default settings.

◆ DivX

Displays the registration code for this player. For more information, go to http://www.divx.com/vod on the Internet.

DOLBY

Settings for the Sound

(AUDIO SETUP)

“AUDIO SETUP” allows you to set the sound according to the playback and connection conditions.

Select “AUDIO SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 59). The default settings are underlined.

AUDIO SETUP

AUDIO DRC: DOWNMIX: DIGITAL OUT:

DOLBY DIGITAL: DTS: 48kHz/96kHz PCM:

◆ AUDIO DRC (Dynamic Range Control) (DVDs only)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “AUDIO DRC.” This function affects the output from the following jacks: – LINE OUT L/R (AUDIO) jacks – DIGITAL OUT (COAXIAL) jack only

Settings and Adjustments

when “DOLBY DIGITAL” is set to “DPCM” (page 64).

STANDARD Normally, select this position.

TV MODE Makes low sounds clear even if

WIDE RANGE

◆ DOWNMIX (DVDs only)

Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see “Checking the audio signal format” (page 39). This function affects the output of the following jacks: – LINE OUT L/R (AUDIO) jacks – DIGITAL OUT (COAXIAL) jack when

you turn the volume down.

Gives you the feeling of being at a live performance.

“DOLBY DIGITAL” is set to “D-PCM” (page 64).

STANDARD

DOLBY SURROUND

D-PCM

OFF

48kHz/16bit

Normally, select this position.

SUR-

Multi-channel audio signals are

ROUND

output to 2 channels for enjoying surround sounds.

NORMAL Multi-channel audio signals are

downmixed to 2 channels for use with your stereo.

◆ DIGITAL OUT

Selects if audio signals are output via the DIGITAL OUT (COAXIAL) jack.

Normally, select this position.

When you select “ON,” see “Setting the digital output signal” for further settings.

OFF The influence of the digital circuit

upon the analog circuit is minimal.

Setting the digital output signal

Switches the method of outputting audio signals when you connect a component such as an amplifier (receiver) or MD deck with a digital input jack. For connection details, see page 17. Select “DOLBY DIGITAL,” “DTS,” and “48kHz/96kHz PCM” after setting “DIGITAL OUT” to “ON.” If you connect a component that is incompatible with the selected audio signal, a loud noise (or no sound) may be heard from the speakers, risking damage to your ears or speakers.

◆ DOLBY DIGITAL (DVDs only)

Selects the type of Dolby Digital signal.

D-PCM

DOLBY DIGITAL

Select this when the player is connected to an audio component without a built-in Dolby Digital decoder. You can select whether the signals conform to Dolby Surround (Pro Logic) or not by making adjustments to the “DOWNMIX” item in “AUDIO SETUP” (page 64).

Select this when the player is connected to an audio component with a built-in Dolby Digital decoder.

◆ DTS

Selects whether or not to output DTS signals.

OFF Select this when the player is

ON Select this when the player is

◆ 48kHz/96kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio signal.

48kHz/16bit

96kHz/24bit All types of signals including

The analog audio signals from the LINE OUT L/R (AUDIO) jacks are not affected by this setting and keep their original sampling frequency level.

connected to an audio component without a built-in DTS decoder.

connected to an audio component with a built-in DTS decoder.

The audio signals of DVD VIDEOs are always converted to 48kHz/16bit.

96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit.

Note

The picture does not fill the screen, even

Additional Information

Troubleshooting

If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.

Power

The power is not turned on.

, Check that the power cord is connected

securely.

Picture

There is no picture/picture noise appears.

, Re-connect the connecting cord securely. , The connecting cords are damaged. , Check the connection to your TV (page 15)

and switch the input selector on your TV so that the signal from the player appears on the TV screen.

, The disc is dirty or flawed. , If the picture output from your player goes

Settings and Adjustments

through your VCR to get to your TV or if you are connected to a combination TV/ VIDEO player, the copy-protection signal applied to some DVD programs could affect picture quality.

, You set the “PROGRESSIVE

(COMPONENT OUT)” in “SCREEN SETUP” to “ON” even though your TV cannot accept the progressive signal. In this case, refer to

, Even if your TV is compatible with

page 62 to reset the setting

progressive format 480p signals and connected using COMPONENT VIDEO OUT jacks, the image may be affected when you set the player to progressive format. In this case, set “PROGRESSIVE (COMPONENT OUT)” in “SCREEN SETUP” to “OFF” so that the player is set to normal (interlace) format

(page 62)

though the aspect ratio is set in “TV TYPE” under “SCREEN SETUP.”

, The aspect ratio of the disc is fixed on your

DVD.

Sound

There is no sound.

, Re-connect the connecting cord securely. , The connecting cord is damaged. , The player is connected to the wrong input

jack on the amplifier (receiver) (page 17).

, The amplifier (receiver) input is not

correctly set.

, The player is in pause mode or in Slow-

motion Play mode.

, The player is in fast forward or fast reverse

mode.

, If the audio signal does not come through

the DIGITAL OUT (COAXIAL) jack, check the audio settings (page 64).

, While playing a Super VCD on which the

audio track 2 is not recorded, no sound will come out when you select “2:STEREO,” “2:1/L,” or “2:2/R.”

The sound volume is low.

, The sound volume is low on some DVDs.

The sound volume may improve if you set “AUDIO DRC” in “AUDIO SETUP” to “TV MODE” (page 64).

Operation

The remote does not function.

, The batteries in the remote are weak. , There are obstacles between the remote and

the player.

, The distance between the remote and the

player is too far.

, The remote is not pointed at the remote

sensor on the player.

The disc does not play.

, The disc is turned over.

Insert the disc with the playback side facing

down.

, The disc is skewed. , The player cannot play certain discs

(page 6).

, The region code on the DVD does not match

the player.

, Moisture has condensed inside the player

(page 3)

1-16

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

, The player cannot play a recorded disc that

is not correctly finalized

The MP3 audio track cannot be played (page 45).

, The DATA CD is not recorded in MP3

format that conforms to ISO 9660 Level 1/ Level 2 or Joliet.

, The DATA DVD is not recorded in MP3

format that conforms to UDF (Universal Disk Format).

, The MP3 audio track does not have the

extension “.MP3.”

, The data is not formatted in MP3 even

though it has the extension “.MP3.”

, The data is not MPEG-1 Audio Layer III

data.

, The player cannot play audio tracks in

mp3PRO format.

, “MODE (MP3, JPEG)” is set to “IMAGE

(JPEG)” (page 50).

, The DATA CD/DATA DVD contains a

DivX video file.

The JPEG image file cannot be played (page 45).

, The DATA CD is not recorded in JPEG

format that conforms to ISO 9660 Level 1/ Level 2 or Joliet.

, The DATA DVD is not recorded in JPEG

format that conforms to UDF (Universal Disk Format).

, The file has an extension other than

“.JPEG” or “.JPG.”

, The image is larger than 3072 (width) ×

2048 (height) in normal mode, or more than 3,300,000 pixels in progressive JPEG. (Some progressive JPEG files cannot be displayed even if the file size is within this specified capacity.)

, The image does not fit the screen (the image

is reduced).

, “MODE (MP3, JPEG)” is set to “AUDIO

(MP3)” (page 50).

, The DATA CD/DATA DVD contains a

DivX video file.

The MP3 audio tracks and JPEG image files start playing simultaneously.

, “MODE (MP3, JPEG)” is set to “AUTO”

(page 50).

(page 7)

The DivX video file cannot be played.

, The file is not created in DivX format. , The file has an extension other than “.AVI”

or “.DIVX.”

, The DATA CD (DivX video)/DATA DVD

(DivX video) is not created in a DivX format that conforms to ISO 9660 Level 1/ Level 2 or Joliet/UDF.

, The DivX video file is larger than 720

(width) × 576 (height).

The album/track/file names are not displayed correctly.

, The player can only display numbers and

alphabet. Other characters are displayed as “*”.

The disc does not start playing from the beginning.

, Program Play, Shuffle Play, Repeat Play, or

A-B Repeat Play is selected (page 26).

, Resume play has taken effect (page 23).

The player starts playing the disc automatically.

, The disc features an auto playback function. , “AUTO PLAY” in “CUSTOM SETUP” is

set to “ON” (page 63).

“Copyright lock” appears and the screen turns blue when playing in DVD-VR mode.

, Images taken from digital broadcasts, etc.,

may contain copy protection signals, such as complete copy protection signals, single copy signals, and restriction-free signals. When images that contain copy protection signals are played, a blue screen may appear instead of the images. It may take a while when looking for playable images.

Playback stops automatically.

, While playing discs with an auto pause

signal, the player stops playback at the auto pause signal.

Additional Information

Some functions such as Stop, Fast Play, Slow Play, Slow-motion Play, Repeat Play, Shuffle Play, or Program Play cannot be performed.

, Depending on the disc, you may not be able

to do some of the operations above. Refer to the operating manual that comes with the disc.

The language for the sound track cannot be changed.

, Try using the DVD’s menu instead of the

direct selection button on the remote (page 24).

, Multilingual tracks are not recorded on the

DVD being played.

, The DVD prohibits the changing of the

language for the sound track.

The subtitle language cannot be changed or turned off.

, Try using the DVD’s menu instead of the

direct selection button on the remote (page 24).

, Multilingual subtitles are not recorded on

the DVD being played.

, The DVD prohibits the changing of

subtitles.

The angles cannot be changed.

, Try using the DVD’s menu instead of the

direct selection button on the remote (page 24).

, Multi-angles are not recorded on the DVD

being played.

, The angle can only be changed when the

“ ” indicator lights up on the front panel display (page 9).

, The DVD prohibits changing of the angles.

The player does not operate properly.

, When static electricity, etc., causes the

player to operate abnormally, unplug the player.

5 numbers or letters are displayed on the screen and on the front panel display.

, The self-diagnosis function was activated.

(See the table on page 69.)

The disc tray does not open and “LOCKED” appears on the front panel display.

, Child Lock is set (page 22).

The disc tray does not open and “TRAY LOCKED” appears on the front panel display.

, Contact your Sony dealer or local

authorized Sony service facility.

“Data error” appears on the TV screen when playing a DATA CD/DATA DVD.

, The MP3 audio track/JPEG image file/

DivX video file you want to play is broken.

, The data is not MPEG-1 Audio Layer III

data.

, The JPEG image file format does not

conform to DCF (page 45).

, The JPEG image file has the extension

“.JPG” or “.JPEG,” but is not in JPEG format.

, The file you want to play has the extension

“.AVI” or “.DIVX,” but is not in DivX format, or is in DivX format but does not conform to a DivX Certified profile.

Self-diagnosis Function

(When letters/numbers appear in the

display)

When the self-diagnosis function is activated to prevent the player from malfunctioning, a five-character service number (e.g., C 13 50) with a combination of a letter and four digits appears on the screen and the front panel display. In this case, check the following table.

C:13:50

First three characters of the service number

C 13 The disc is dirty or recorded

C 31 The disc is not inserted

E XX

(xx is a number)

Cause and/or corrective action

in a format that this player cannot play (page 6). ,Clean the disc with a

cleaning cloth or check its format.

correctly. ,Re-insert the disc

correctly.

To prevent a malfunction, the player has performed the self-diagnosis function. ,Contact your near est

Sony dealer or local authorized Sony service facility and give the 5character service number. Example: E 61 10

,continued

Glossary

Album (page 47, 53)

A unit in which to store DivX video files, JPEG image files, or MP3 audio tracks on a DATA CD/DATA DVD. (“Album” is an exclusive definition for this player.)

Chapter (page 9)

Sections of a picture or a music feature that are smaller than titles. A title is composed of several chapters. Depending on the disc, no chapters may be recorded.

DivX® (page 52)

Digital video technology created by DivX, Inc. Videos encoded with DivX technology are among the highest quality with a relatively small file size.

Dolby Digital (page 18, 64)

Digital audio compression technology developed by Dolby Laboratories. This technology conforms to multi-channel surround sound. The rear channel is stereo and there is a discrete subwoofer channel in this format. Dolby Digital provides the same discrete channels of high quality digital audio found in “Dolby Digital” theater surround sound systems. Good channel separation is realized because all of the channel data is recorded discretely and little deterioration is realized because all channel data processing is digital.

DTS (page 18, 65)

Digital audio compression technology that Digital Theater Systems, Inc. developed. This technology conforms to multi-channel surround sound. The rear channel is stereo and there is a discrete subwoofer channel in this format. DTS provides the same discrete channels of high quality digital audio. Good channel separation is realized because all of the channel data is recorded discretely and little deterioration is realized because all channel data processing is digital.

Additional Information

DVD VIDEO (page 5)

A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. The data capacity of a single-layer and singlesided DVD is 4.7 GB (Giga Byte), which is 7 times that of a CD. The data capacity of a double-layer and single-sided DVD is 8.5 GB, a single-layer and double-sided DVD is

9.4 GB, and double-layer and double-sided DVD is 17 GB. The picture data uses the MPEG 2 format, a worldwide standard of digital compression technology. The picture data is compressed to about 1/40 (average) of its original size. The DVD also uses a variable rate coding technology that changes the data to be allocated according to the status of the picture. Audio information is recorded in a multi-channel format, such as Dolby Digital, allowing you to enjoy a more realistic audio presence. Furthermore, various advanced functions such as the multi-angle, multilingual, and Parental Control functions are provided with the DVD.

DVD-RW (page 5)

A DVD-RW is a recordable and rewritable disc that is the same size as a DVD VIDEO. The DVD-RW has two different modes: VR mode and Video mode. DVD-RWs created in Video mode have the same format as a DVD VIDEO, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited.

DVD+RW (page 5)

A DVD+RW (plus RW) is a recordable and rewritable disc. DVD+RWs use a recording format that is comparable to the DVD VIDEO format.

File (page 45, 52)

A JPEG image or DivX video recorded on a DATA CD/DATA DVD (“File” is an exclusive definition for this player.) A single file consists of a single image or movie.

Film based software, Video based software (page 62)

DVDs can be classified as Film based or Video based software. Film based DVDs contain the same images (24 frames per second) that are shown at movie theaters. Video based DVDs, such as television dramas or sit-coms, displays images at 30 frames/60 fields per second.

Normal (Interlace) format (page 62)

Normal (Interlace) format shows every other line of an image as a single “field” and is the standard method for displaying images on television. The even number field shows the even numbered lines of an image, and the odd numbered field shows the odd numbered lines of an image.

Progressive format (page 62)

Compared to the Interlace format that alternately shows every other line of an image (field) to create one frame, the Progressive format shows the entire image at once as a single frame. This means that while the Interlace format can show 30 frames/60 fields in one second, the Progressive format can show 60 frames in one second. The overall picture quality increases and still images, text, and horizontal lines appear sharper. This player is compatible with the 480 progressive format.

Progressive JPEG

Progressive JPEGs are used mostly on the internet. They are different from other JPEGs in that they “fade in” gradually instead of being drawn from top to bottom when displayed on a browser. This lets you view the image while it is being downloaded.

Title (page 9)

The longest section of a picture or music feature on a DVD, movie, etc., in video software, or the entire album in audio software.

,continued

1-17

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

Specifications

System

Laser: Semiconductor laser Signal format system: NTSC

Audio characteristics

Frequency response: DVD VIDEO (PCM

48 kHz): 2 Hz to 22 kHz (±0.5 dB)/ CD: 2 Hz to 20 kHz (±0.5 dB)

Harmonic distortion: 0.01 % Dynamic range: DVD VIDEO: 85 dB/

CD: 85 dB

Wow and flutter: Less than detected value

(±0.001% W PEAK)

Outputs

(Jack name: Jack type/Output level/Load

impedance)

LINE OUT (AUDIO): Phono jack/2 Vrms/

10 kilohms

DIGITAL OUT (COAXIAL): Phono jack/

0.5 Vp-p/75 ohms

COMPONENT VIDEO OUT(Y, P

Phono jack/Y: 1.0 Vp-p/P

interlace*

= 0.648 Vp-p, progressive or interlace* ohms

*1BLACK LEVEL (COMPONENT OUT) is ON *2BLACK LEVEL (COMPONENT OUT) is OFF

LINE OUT (VIDEO): Phono jack/1.0 Vp-p/

75 ohms

B, PR:

= 0.7 Vp-p/75

General

Power requirements:

120 V AC, 60 Hz

Power consumption: 9W Dimensions (approx.):

430 × 43 × 206.5 mm (width/height/ depth) incl. projecting parts

Mass (approx.): 1.70 kg Operating temperature: 5 ° C to 35 ° C Operating humidity: 25 % to 80 %

Supplied accessories

See page 14.

Specifications and design are subject to change without notice.

B, PR):

Additional Information

1-18E

1-18

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

SECTION 2

DISASSEMBLY

Note: Follow the disassembly procedure in the numerical order given.

2-1. UPPER CASE

4 Two Tapping Screws

3 Tray Cover

6 Upper case

5 Three Tapping Screws

Chassis Back

2-2. FRONT PANEL ASSEMBLY

4 Claw

5 Front Panel Assembly

3 Claw

2 Claw

1 Claw

2-1

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

2-3. LOADING ASSEMBLY

4 Three Screws +BV3 (3-CR)

5 Loading Assembly

1 FMO-008 Flat Flexible Cable (CN101, 24P)

2 MD-111 Harness (CN201, 6P)

3 FMS-013 Flat Flexible Cable (CN202, 5P)

2-2

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

2-4. OPTICAL PICK-UP

(DEVICE, OPTICAL KHM-313CAA/C2RP)

Note:

Solder shortland before remove the FMO-008 Flat Flexible Cable from 24 pin BU connector.

Shortland Position

3 Optical Device (KHM-313CAA/C2RP)

6 Two Insulator

5 FMO-008 Flat Flexible Cable (CN101, 24P)

4 MD-111 Harness (CN201, 6P)

1 Four Insulator Screws

2 FFC Holder

Caution Point on the Laser Diode:

Laser Diode in the optical Device is very sensitive to Surge Current or ElectroStatic Discharge (ESD):

After take-out FMO-008 Flat Flexible Cable from CN101 of MV-52/53/54 board immediately ground FMO-008 Flat Flexible Cable pattern using short clip. Metal paper clip can be used as short clip.

2-3

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

2-5. REAR PANEL, MV-52/53/54 BOARD and IF-150 BOARD

a). (DVP-NS28/NS38/NS39 ONLY)

6 FMO-008 Flat Flexible Cable (CN101, 24P)

4 MD-111 Harness (CN201, 6P)

5 FMS-013 Flat Flexible Cable (CN202, 5P)

Note: Caution Point on the IF-150

When handling IF-150 Board avoid contact with the sharp metal edge on the top side of Vacuum Fluorescent Display (ND401).

9 PM-136 Harness

(CN501, 10P)

7 Three Screws +BV3 (3-CR)

8 MV-53 Board

1 One Tapping Screw

Three Screws

+BV3 (3-CR)

3 Rear Panel

q; Two Screws

+BV3 (3-CR)

qs Board to Board Connector

qa IF-150 Board

2-4

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

c). (DVP-NS64P/NS67P ONLY)

6 FMO-008 Flat Flexible Cable (CN101, 24P)

4 MD-111 Harness (CN201, 6P)

5 FMS-013 Flat Flexible Cable (CN202, 5P)

9 PM-136 Harness (CN501, 10P)

1 One Tapping Screw

7 Three Screws +BV3 (3-CR)

8 MV-52 Board

2 Three Screws

+BV3 (3-CR)

3 Rear Panel

q; Two Screws

+BV3 (3-CR)

qa IF-150 Board

2-6

b). (DVP-NS47P/NS57P ONLY)

5 FMS-013 Flat Flexible Cable (CN202, 5P)

4 MD-111 Harness (CN201, 6P)

DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P

6 FMO-008 Flat Flexible Cable (CN101, 24P)

9 PM-136 Harness

(CN501, 10P)

1 One Tapping Screw

Two Screws

+BV3 (3-CR)

7 Three Screw +BV3 (3-CR)

8 MV-54 Board

3 Rear Panel

q; Two Screws

+BV3 (3-CR)

qs Board to Board Connector

qa IF-150 Board

2-5

+ 82 hidden pages