Sony DSC-WXI0 User Manual

SON"_ 4-270-089-22(1)

0,0ita,St,,,Oamera,,r,stroct,or,Mar,oa, GBiliii_iiii! Oar,ara,oto0ra,,a_,,0,ta,,,v,ar,oa,_,e,r,*occ,or,esESiliii_iiii!_

CgbeP-shot

memoryStle_ rm ctA_

('l},,,ro.T.,u__ ,5",._"

AVC H i_ I-IIE_rllll|

Owner's Record

The model and serial numbers arc located on the bottom. Record tile serial number in tile space provided below. Refer to these numbers whenever you call your Sony dealer

regarding this product. Model No. DSC-WXI0

Serial No. Model No. A(-UB IO/UB lOB Serial No.

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

IMPORTANT SAFETYINSTRUCTIONS

-SAVETHESEINSTRUCTIONS DANGER

TOREDUCETHERISKOFFIREORELECTRIC

SHOCK,CAREFULLYFOLLOWTHESE INSTRUCTIONS

If the sllape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for tile power outlet.

Battery pack

It the baltery pack is mishandled, the batlcry pack can bursl, cause a fire or c\cn chemical bums. Obsel-x e the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to ally shock or force such as hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal o[_iects to come into contact with tile battery terminals.

• Do not expose to high temperature above 60°C (141}°F) such as ill direct sunlight or in a

GB car parked in tile sun.

2 • Do not incinerate or dispose of ill fire.

• Do not handle damaged or leaking lithium ion batteries.

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack.

• Keep the battery pack out of the reach of small childr<.n.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

AC Adaptor

(onnect the A(" Adaptor to the n_.'al-cSt wall outk't (w:dl socket). If some trouble occurs while using the AC Adaptor. immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

The power cord (mains lead), if supplied, is designed specifically lk_ruse with this camera only. and should not be used with other electrical equipment.

RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batt_'ries ar_' recycl:.ble. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest

you.

For more information regarding recycling of rechargeable batteries. call toll fl-ce

1-800-822-8837. or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

Battery pack

This device complk's with Part 15 of tilt' FUU Ruk's. Opt.ration is sub.ject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interf<.mnce received, inchlding interf<.mnce that may cause undesired operation.

This Class B digital apparatus complies with Canadian I(7ES-003.

UL is an internationally recognized safety organization. The UL Mark on the product means it has been UL Listed.

If you have any questions about this product, you may call:

Sony Customer lnlk_rmation Center

1-800-222-SONY (7669).

The number below is lk_r the F((7 related matters only.

Regulatory Information

Declaration of Conformity

Trade Nume: SONY Model No.: DS(-WX]0

Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo.

Telephone No.: 858-942-2230

This device complies with Partl 5 of the PCC Rules. Operation is sub.ject to the l\Hlowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

San Diego. CA 92127 U.S.A.

CAUTION

You arc cautioned thut any changes or modifications not expressly approved in this munuul could void your authority to operate this equipment.

Note:

This equipment hus been tested and found to comply with the limits for a Ulass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses. and can radiate radio lYequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. them is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interl\.rence to radio or television reception, which can be determined by turning the equipment o11"and on. the user is encouraged to try to correct the interference by one or more of the lkHIowing measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dilTerent l¥om that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician lk_r help.

The supplied interface cable must be used with the equipment in order to comply with the limits lk_r a digital device pursuant to Subpart B of Part 15 of P(C Rules.

Notice for the customers in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan ]Viinato-ku Tokyo,

108-0075 Japan. Tile Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61. 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee

doculnents.

This product has been tested and found compliant with the limits set out in the EM( Directive for using connection cables shorter than 3 meters (9.8 feet).

Attention

The electromagnetic fields at tile specific lYequencies may influence tile picture and sound of this unit.

Notice

If static electricity or electromagnetism causes data transl\,r to discontinue midway (fail), restart tile application or disconnect and connect the communication cable (USB. etc.) again.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

shall not be treated as household waste. Instead it shall be banded oxer to tile applicable collection point for the recycling of electrical and eleclronic

This symbol on tile product or on its packaging indicates that Ibis product

equipment. By, ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for tile environment and llulnan health, which could otherwise be caused by inappropriate waste handling

of this product. The recycling of materials will help to conserx e natural

please contact your local (ivic Office. your household waste disposal service or the shop where you purchased tile product.

resources. For more detailed inl\_rmation about recycling of this product.

Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)

i:)rovided with Ibis product shMl not be treated as household waste. On certain batteries Ibis symbol might be used in combination with a This symbol on the battery or on the packaging indicates th:*t the battery

chelnical sylnboh Tile chelnical symbols for mercury (Hg) or lead (Pb) are added if the batlery contains more than 0.O005c/¢ mercury or 0.004cA lead.

potentially negative consequences lor tile environment and human health which could otherwise be caused by inappropriate waste handling of tile battery. The recycling of the materials will help to conserve natural resources. In case of products that lor safety, performance or data integrity masons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that tile battery will be treated properly, band over tile product at end-ol-lilc to the applicable collection point for tile recycling of electrical and electronic equipment. For all other batteries, please view tile section on how to remove the battery from the product sately. Hand tile battery over to tile applicable collection point lk_r the recycling of waste batteries. For more detailed ilfformation about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

A moulded plug complying with BS 1363 is fitted to this equipment lor your salcty and convenience.

Should the fuse ill the plug supplied need to be replaced, a fuse of tile same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with all @ or

mark) must be used. If tile plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover alter you change the fuse. Never use tile plug without tile fuse cover. If you should lose tile fuse cover, please contact your nearest Sony service station.

By ensuring these batteries are disposed of correctly, you will help prevent

For details on advanced operations, please read "Cyber-shot User Guide" (HTML) on the CD-ROM (supplied) using a compuler.

Insert the CD-ROM into the CD-ROM drive.

For Windows users:

@ Click IUser Guide] -_ [Installl. @ Star1 "User Guide" from the shortcut on the desktop.

For Macintosh users:

(_) Select the [User Guide] folder and copy [eng] folder stored in [User Guide]

folder to your computer.

@ Afler copying is complete, double-click "iudex.html" in [eng] folder.

Rechargeable battery pack NP-BG1 (1)/Battery case (1) Multi-use terminal USB cable (1)

AC Adaptor AC-UB 10/UB 10B (1) Power cord (mains lead) (not supplied in the USA and Canada) (1)

Wrist strap (1) CD-ROM (1)

Cyber-shot application software "Cyber-sh()t User Guide"

• Instruction Manual (this manual) (1)

[] Shutter button [] For shooting: W/T (Zoom) lever

For viewing: O_ (Playback zoom) lever/l{_ (Index) lever

[] Flash [] ON/OFF (Power) button [] Power/Charge lamp [] Microphone

[] Self-timer lamp/Smile Shutter

lamp/AF illuminator

_[] Lens

[] Speaker [] LCD screen

[] (Playback)button [] Mode dial

[] MOVIE (Movie) button [] HDMI connector

[] Hook for wrist strap [] Control wheel

[] ?/_ (In-Camera Guide/Delete)

button

[] MENU button [] _ (TransfcrJet IM) mark

[] Battery insertion slot [] Tripod receptacle

• Use atripod with a screw less than 5.5 mm (7/32 inches) long.

Otherwise, you cannot firmly secure tile camera, and damage to

tile camera may occur.

[] Battery eject lever [] Access lamp [] Memory card slot [] Multi connector (Type3b) [] Battery/memory card cover

_ll_l_l_l_!_!_!!_:li_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_ii_ii)!)!i!_!;_!_i_

LOCK O

:;_!::_,:! _i!!ili!!_........... :_:i!ii_!

Eject lever

1Open the cover.

2Insert the battery pack.

• While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery eject lever locks at'ter insertion.

For customers in the USA and Canada

)

Power cord (Mains lead)

For customers in countries/regions other than the USA and Canada

Power/Charge lamp Lit: Charging

Off: Charging finished Flash: Charging error

1Connect the camera and the AC Adaptor (supplied),

using the multi-use terminal USB cable (supplied).

2Connect the AC Adaptor to the wall outlet (wall socket).

The PowedCharge hunp lights orange, and charging starts.

• Turn off the camera while charging the battery.

• You can charge the battery pack even when it is partially charged.

• When the Power/Charge lamp flashes and charging is not finished, remove and re-insert the battery pack.

• When the PoweffCharge lamp on the camera does not lit even if the AC Adaptor is connected to the camera and the wall outlet (wall sncket), it indicates that the

charging stops temporarily nu standby. The charging stops and enters the standby stares automatically when the temperature is outside of the recommended

nperating temperature. When the temperature gets back within the apprnpriate range, the charging resumes. We recommend charging the battery pack in an

ambient temperature of between 10°C to 30°C (50°F to 86°F).

• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If any malfunctions occur while using the AC Adaptnr, disconnect the plug from the wall

nutlet (wall socket) immediately to disconnect the pnwer snurce.

• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall sncket).

• Be sure to use only genuine Sony brand battery packs, multi-use terminal USB cable (supplied) and AC Adaptor (supplied).

Charging by connecting to a computer

The batlery pack can be charged by connecling the camera to a computer using

a multi-use terminal USB cable.

• Note the fnllnwing points when charging via a computer: lfthe camera is connected to a laptop computer that is not connected to a power

source, the laptnp battery level decreases. Do not charge lor an extended period of time.

Do not turn on/nff nr restart the computer, nr wake the computer resume fl'om sleep mode when a USB connection has been established between the computer

and the camera. The camera may cause a malfimctinn. Before turning nn/off, or restarting the computer nr waking the computer fl'om sleep mode, disconnect the

camera alld tile cnmputer. No guarantees are made lot charging using a custnm=built computer or a

modified computer.

Charging time

The charging time is approximately 270 rain. using the AC Adaptor

(supplied).

• The above charging time applies when charging a fully depleted battery pack at a

temperature nf 25°C (77°F). Charging may take longer depending on conditions of

use and circumstances.

Battery life and number of images you can record and view

iiiii iiii ; iiii iii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii i iii i !i iN L

Shooling/still images) Approx. 180 rain. Approx. 360 images Viewing/still images) Approx. 280 min. Approx. 5600 images

Shooling (movies) Approx. 85 min.

• The above number of images applies when the battery pack is lidly charged. The mnnber of images may decrease depending on the conditions of use.

• The number of images that can be recorded is for shooting under the IMlowing conditions:

- Using Sony "Memory Stick PRO Duo" (Mark2) media (sold separately)

The battery pack is used at an ambient temperature of 25°C (77°F).

• The number for "Shooting (still images)" is based on the C1PA standard, and is li)r shooting under the following conditions:

(CIPA: Camera & lmaging Products Association)

-DISP (Display Setting) is set to [ON].

Shooting once every 30 seconds. The zoom is switched alternately between the W and T ends.

The flash strobes once every two times. The power turns on and off once every ten times.

• The battery lile for movies applies shooting under the following conditions:

Movie quality: AVCHD HQ When continuous shooting ends because of set limits (page 22), press the

MOVIE (Movie) button again and continue shooting. Shooting functions such as the zoom do not operate.

Supplying power

The camera can be supplied with power from the xx4dloutlet (_x4dl socket) by

connecting to the AC Adaptor, using the multi-use terminal USB cable (supplied).

You can import images to a computer without worrying about wearing down the battery pack by connecting the camera to a computer using the multi-use

terminal USB cable.

• Power cannot be supplied wheu the battery pack is not inserted in the camera.

• Power supply fi'om the wall outlet (wall socket) is a'_ailable only when the camera is in playback mode or when a connection is made between the camera and a

computer, lfthe camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the multi-use terminal USB cable.

• lfynu connect the camera and acomputer using the multi-use terminal USB cable when the camera is in playback mode, the display on the camera is changed li"om

the playback screen to the USB connection screen. Press [1_ i (Playback) button to switch to the playback screen.

r_OPEN

LOCK O

Ensure the notched corner faces

correctly.

1Open the cover.

2Insert the memory card (sold separately).

• With the notched comer facing as illustrated, insert the memory card until it clicks into place.

3 Close the cover.

• Closing the cover with the battery inserted incorrectly may damage the eB

camera. 13

Memory cards that you can use

Memory Stick PRO Duo O O (Mark2 only)

A Memory Stick PRO-HG Duo O O

Memory Stick Duo O SD memory card C) C) (Class 4 or laster)

B SDHC memory card C) C) (Class 4 or laster)

SDXC memory card C) C) (Class 4 or laster)

• In 1his ulanual, products in A are collectively referred to as "Memory Slick Duo" media, and producls in B are colleclively referred to as SD card.

To remove the memory card/battery pack

Memory card: Push the memory card in once. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

• Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory.

Power/Charge lamp (green)

ON/OFF (Power)

Control Wheel

Select items: ,A/V/.41!I_ Set the numeric value of date and

time: _/_ Set: •

1Press the ON/OFF (Power) button.

Date & Time selling is displayed when you press the ON/OFF (Power)

bulton [or the t'irsl time.

• It may take time for the power to turn on and allow operation.

2Select a desired language. 3Select the desired area following the instructions on the

screen, then press O.

4Set [Date & Time Format], [Daylight Savings] or

[Summer Time] and [Date & Time], then select [OK] ---*

[OK].

• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

5 Select the desired display color, following the

instructions on the screen.

6When an [In-Camera Guide] introductory message is

appeared on the screen, select [OK].

Shutter button

Mode dial

i_ : Intelligent Auto

_: Movie Mode

Shooting still images

T: zoom in

1Press the shutter button halfway down to focus.

When the image is in focus, a beep sounds and the • indicator lights.

2 Press the shutter button fully down.

Shooting movies

1Press the MOVIE (Movie) button to start recording.

• Use the W/T (zoom) lever lo change the zoom scale.

2 Press the MOVIE button again to stop recording.

• The sound of the lens and lever operating will be recorded when the zoom function operates while shooting a movie. The sound of the MOVIE button operating may

also be recorded when movie recording is finished.

• Continuous shooting is possible lot approximately 29 minutes at one time at the camera's defimlt settings and when the temperature is approximately 25°C (77°F).

When movie recording is finished, you can restart recording by pressing the MOVIE button again. Recording may stop to protect the camera depending on the ambient temperature.

_,_o W" ZOOI]f] ()l.lt

',_7; T: zoomin

.....

?/_ (Delete) Select images: I_ (next)/<l (prevkms) or turn

Set: •

1Press the'_,- (Playback) button.

• When images on a memory card recorded wilh other cameras are played back on this camera, the registration screen lk)r the data file appears.

Selecting next/previous image

Select an image by pressing _ (next)/_l (previous) on the control wheel or by turning the control wheel. Press • in the center of the control wheel to view

lllovies.

Deleting an image

(_ Press _/_ (Delele) button.

@ Select [This hnage] with • on the control wheel, then press •.

Returning to shooting images

Press the shutter button halfway down.

the control wheel

+ 39 hidden pages