Sony DSC-W520 Cyber-shot Instruction Manual

Digital Still Camera / Instruction Manual GB
CT
CS
Kamera Digital / Panduan Pengguna ID
4-273-955-81(1)
DSC-W520

English

WARNING
To reduce fire or shock hazard, do not expose the unit to rain or moisture.
IMPORTANT SAFETY INSTRUCTIONS
-SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.
CAUTION
[ Battery pack
If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions.
• Do not disassemble.
• Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it.
• Do not short circuit and do not allow metal objects to come into contact with the battery terminals.
• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked in the sun.
• Do not incinerate or dispose of in fire.
• Do not handle damaged or leaking lithium ion batteries.
• Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack.
• Keep the battery pack out of the reach of small children.
• Keep the battery pack dry.
• Replace only with the same or equivalent type recommended by Sony.
• Dispose of used battery packs promptly as described in the instructions.
GB
[ Battery charger
Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
For Customers in the U.S.A. and Canada
[ RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking Lithium-Ion batteries.
For Customers in Europe
[ Notice for the customers in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).
[ Attention
The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.
[ Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.
GB
GB
[ Disposal of Old Electrical & Electronic Equipment (Applicable in
the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural
please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
resources. For more detailed information about recycling of this product,
[ Disposal of waste batteries (applicable in the European Union
and other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.
potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
By ensuring these batteries are disposed of correctly, you will help prevent
GB
Notice for customers in the United Kingdom
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
GB
GB
GB

Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM

For details on advanced operations, please read “Cyber-shot User Guide” (HTML) on the CD-ROM (supplied) using a computer.
Insert the CD-ROM into the CD-ROM drive.
For Windows users:
1 Click [User Guide] t [Install]. 2 Start “User Guide” from the shortcut on the desktop.
For Macintosh users:
1 Select the [User Guide] and copy [eng] folder stored in the [User Guide]
folder to your computer.
2 After copying is complete, double-click “index.html” in the [eng] folder.

Checking the accessories supplied

• Battery charger BC-CSN/BC-CSNB (1)
• Power cord (mains lead) (not supplied in the USA and Canada) (1)
• Rechargeable battery pack NP-BN1 (1)
• Dedicated USB cable (Sony Corporation 1-837-597-) (1)
• Wrist strap (1)
•CD-ROM (1)
– Cyber-shot application software – “Cyber-shot User Guide”
• Instruction Manual (this manual) (1)
GB
GB

Identifying parts

H Speaker I LCD screen J (Playback) button K For shooting: W/T (Zoom)
button For viewing: (Playback zoom) button/ (Index) button
L Hook for wrist strap M Mode switch N (Delete) button O MENU button P Control button
Menu on: v/V/b/B/z Menu off: DISP/ / /
Q Battery insertion slot R Battery eject lever S Tripod receptacle
• Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.
T Battery/memory card cover U Access lamp V Memory card slot W (USB) / A/V OUT jack
A ON/OFF (Power) lamp B Shutter button C ON/OFF (Power) button D Flash E Microphone F Self-timer lamp/Smile Shutter
GB
lamp
G Lens

Charging the battery pack

For customers in the USA and Canada
Plug
CHARGE lamp
Lit: Charging Off: Charging finished (normal charge)
Insert the battery pack into the battery charger.
1
• You can charge the battery even when it is partially charged.
Connect the battery charger to the wall outlet (wall
2
socket).
• If you continue charging the battery pack for about one more hour after the CHARGE lamp turns off, the charge will last slightly longer (full charge).
x
Charging time
Full charge time: approx. 245 min. Normal charge time: approx. 185 min.
Notes
• The above charging times apply when charging a fully depleted battery pack at a temperature of 25 °C (77 °F). Charging may take longer depending on conditions of use and circumstances.
• Connect the battery charger to the nearest wall outlet (wall socket).
• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.
• Be sure to use the battery pack or the battery charger of the genuine Sony brand.
For customers in countries/regions other than the USA and Canada
Power cord (Mains lead)
GB
GB
x
Battery life and number of images you can record/ view
Battery life (min.) No. of Images
Shooting still images Approx. 110 Approx. 220
Viewing still images Approx. 170 Approx. 3400
Shooting movies Approx. 110
Notes
• The number of images that can be recorded is an approximate number when shooting with a fully charged battery pack. The number may be less depending on the circumstances.
• The number of images that can be recorded is when shooting under the following conditions: – Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately). – When a fully charged battery pack (supplied) is used at an ambient temperature
of 25 °C (77 °F).
• The number of still images that can be recorded is based on the CIPA standard, and is for shooting under the following conditions. (CIPA: Camera & Imaging Products Association) – [SteadyShot] is set to [Off]. – DISP (Screen Display Settings) is set to [Normal]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times.
• The battery life for movies is when shooting under the following conditions: – Recording mode: VGA – When continuous shooting ends because of set limits (page 19), press the shutter
button down again and continue shooting. Shooting functions such as the zoom do not operate.
10
GB

Inserting the battery pack/a memory card (sold separately)

GB
Ensure the notched corner
Open the cover.
1
Insert the memory card (sold separately).
2
• With the notched corner facing as illustrated, insert the memory card until it clicks into place.
Insert the battery pack.
3
• Align the battery pack with the guide arrow inside the battery insertion slot. Then, insert the battery pack until the battery eject lever locks into place.
Close the cover.
4
• Closing the cover with the battery inserted incorrectly may damage the camera.
faces correctly.
Eject lever
GB
11
x
Memory cards that you can use
Memory Card For still images For movies
Memory Stick PRO Duo aa
A
Memory Stick PRO-HG Duo aa
Memory Stick Duo a
SD memory card aa
B
SDHC memory card aa
In this manual, products in A are collectively referred to as “Memory Stick Duo”
• media.
• In this manual, products in B are collectively referred to as SD card.
• When recording movies, it is recommended that you use Class 2 or faster SD cards.
x
To remove the memory card/battery pack
Memory card: Push the memory card in once. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.
Note
• Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory.
12
GB

Setting the date and time

Date & Time setting is displayed when you press the ON/OFF (Power) button for the first time.
ON/OFF (Power)
Control button
Select items: v/V/b/B Set: z
Press the ON/OFF (Power) button.
1
Date & Time setting is displayed when you press the ON/OFF (Power) button for the first time.
• It may take time for the power to turn on and allow operation.
Set [Date & Time Format], [Daylight Savings] and [Date
2
& Time], then press [OK].
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
Select the desired area following the instructions on the
3
screen, then press z t [OK].
Select the desired display color and display resolution
4
mode, following the instructions on the screen.
GB
GB
13

Shooting still images/movies

Shutter button
Mode switch
: Still image : Movie
Shooting still images:
Press the shutter button halfway down to focus.
1
When the image is in focus, a beep sounds and the z indicator lights.
Press the shutter button fully down.
2
Shooting movies:
Press the shutter button fully down to start recording.
1
• You can zoom by pressing the W/T (zoom) button before shooting.
Press the shutter button fully down again to stop
2
recording.
W: zoom out T: zoom in
14
GB

Viewing images

W: zoom out T: zoom in
(Playback)
Control button
(Delete)
Select images: B (next)/b (previous) Set: z
Press the (Playback) button.
1
x
Selecting next/previous image
Select an image with B (next)/b (previous) on the control button. Press z in the center of the control button to view movies.
x
Deleting an image
1 Press (Delete) button. 2 Select [This Image] with v on the control button, then press z.
x
Returning to shooting images
Press the shutter button halfway down.
GB
GB
15

List of icons displayed on the screen (When shooting still images)

B
Display Indication
z
ISO400 ISO number
125 Shutter speed
F2.8 Aperture value
A
Display Indication
Battery remaining
Low battery warning
Image size
Scene Selection
Shooting mode
Scene Recognition icon
White balance
Metering Mode
SteadyShot
Vibration warning
Anti Blink
DRO
Smile Detection Sensitivity indicator
Zoom scaling
GB
+2.0EV Exposure Value
C
Display Indication
96 Number of recordable
D
Display Indication
16
AE/AF lock
AF range finder frame indicator
Recording folder
images
Recording/Playback Media (memory card, internal memory)
Flash mode
Red-eye reduction
Flash charging
Self-timer
Face Detection
Destination
Burst Settings
AF range finder frame
Spot metering cross­hairs

Introduction of other functions

Other functions used when shooting or playing back can be operated using the Control button or MENU button on the camera. This camera is equipped with a Function Guide that allows you to easily select from the functions. While displaying the guide, try the other functions.
Control button
MENU
Function Guide
x
Control button
DISP (Screen Display Settings): Allows you to change the screen display.
(Self-Timer): Allows you to use the self-timer. (Smile Shutter): Allows you to use the Smile Shutter mode.
(Flash): Allows you to select a flash mode for still images.
x
Menu Items
Shooting
REC Mode Select recording mode.
Scene Selection Select pre-set settings to match various scene conditions.
Easy Mode Shoot still images using minimal functions.
Shooting Direction
Image Size
SteadyShot Select the anti-blur mode.
Burst Settings Select single-image mode or burst mode.
EV Adjust the exposure manually.
ISO Adjust the luminous sensitivity.
Set the direction to pan the camera when shooting Sweep Panorama images.
Select the image size for still images, panoramic images or movie files.
GB
GB
17
White Balance Adjust color tones of an image.
Focus Select the focus method.
Metering Mode
Smile Detection Sensitivity
Face Detection
Anti Blink
DRO
Select the metering mode that sets which part of the subject to measure to determine the exposure.
Set the Smile Shutter function sensitivity for detecting smiles.
The camera detects faces and adjusts various settings automatically.
Set to automatically shoot two images and select image in which the eyes are not blinking.
Set DRO function to correct the brightness and contrast and improve the image quality.
Viewing
Easy Mode
Slideshow Select a method of continuous playback.
Retouch Retouch an image using various effects.
Delete Delete an image.
Protect Protect the images.
DPOF Add a print order mark to a still image.
Rotate Rotate a still image to the left or right.
Select Folder
x
Setting items
Set the text-size increases and all indicators become easier to see.
Select a folder which contains the images you want to play back.
If you press the MENU button while shooting or during playback,
(Settings) is provided as a final selection. You can change the default
settings on the (Settings) screen.
Shooting Settings
Main Settings
GB
18
Grid Line/Disp. Resolution/Digital Zoom/Red Eye Reduction/Blink Alert
Beep/Language Setting/Function Guide/Display color/ Power Save/Initialize/Video Out/USB Connect/LUN Setting
Format/Create REC. Folder/Change REC. Folder/Delete
Memory Card
*
Tool
Clock Settings
* If a memory card is not inserted, (Internal Memory Tool) will be displayed and
only [Format] and [File Number] can be selected.
REC. Folder/Copy/File Number
Area Setting/Date & Time Setting

Number of still images and recordable time of movies

The number of still images and recordable time may vary depending on the shooting conditions and the memory card.
x
Still images
(Units: Images)
Capacity
Size
14M 4 300
VGA 170 11000
16:9(11M) 6 380
x
Movies
The table below shows the approximate maximum recording times. These are the total times for all movie files. The recordable movie file size is up to approx. 2 GB for each file.
Capacity
Size
VGA 00:00:25 00:25:00
QVGA 00:01:00 01:15:00
Internal memory Memory card
Approx. 28 MB 2 GB
(Units: hour : minute : second)
Internal memory Memory card
Approx. 28 MB 2 GB
GB
GB
19

Notes on using the camera

Changing the language setting
The screen language setting, press the MENU button, then select
(Settings) t (Main Settings) t [Language Setting].
On use and care
Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering, dropping or stepping on the product. Be particularly careful of the lens.
Notes on recording/playback
• Before you start recording, make a trial recording to make sure that the camera is working correctly.
• The camera is neither dust-proof, nor splash-proof, nor water-proof.
• Avoid exposing the camera to water. If water enters inside the camera, a malfunction may occur. In some cases, the camera cannot be repaired.
• Do not aim the camera at the sun or other bright light. It may cause the malfunction of the camera.
• If moisture condensation occurs, remove it before using the camera.
• Do not shake or strike the camera. It may cause a malfunction and you may not be able to record images. Furthermore, the recording media may become unusable or image data may be damaged.
Do not use/store the camera in the following places
• In an extremely hot, cold or humid place In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction.
• Under direct sunlight or near a heater The camera body may become discolored or deformed, and this may cause a malfunction.
• In a location subject to rocking vibration
• Near a location that generates strong radio waves, emits radiation or is strongly magnetic place. Otherwise, the camera may not properly record or play back images.
• In sandy or dusty places Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired.
20
GB
On carrying
Do not sit down in a chair or other place with the camera in the back pocket of your trousers or skirt, as this may cause malfunction or damage the camera.
Notes on the LCD screen and lens
The LCD screen is manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording.
On camera’s temperature
Your camera and battery may get warm due to continuous use, but it is not a malfunction.
On the overheat protection
Depending on the camera and battery temperature, the power may turn off automatically to protect the camera. A message will be displayed on the LCD screen before the power turns off.
On charging the battery
If you charge a battery that has not been used for a long time, you may be unable to charge it to the proper capacity. This is due to the battery characteristics, and is not a malfunction. Charge the battery again.
Warning on copyright
Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.
No compensation for damaged content or recording failure
Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc.
Cleaning the camera surface
Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. To prevent damage to the finish or casing:
– Do not expose the camera to chemical products such as thinner, benzine, alcohol,
disposable cloths, insect repellent, sunscreen or insecticide.
GB
GB
21

Specifications

Camera
[System]
Image device:
7.76 mm (1/2.3 type) color CCD, Primary color filter
Total pixel number of camera:
Approx. 14.5 Megapixels
Effective pixel number of camera:
Approx. 14.1 Megapixels
Lens: 5× zoom lens
f = 4.5 mm – 22.5 mm (25 mm – 125 mm (35 mm film equivalent)) F3.3 (W) – F5.8 (T)
Exposure control: Automatic exposure,
Scene Selection (9 modes)
White balance: Automatic, Daylight,
Cloudy, Fluorescent 1/2/3, Incandescent, Flash
Recording interval for Burst mode:
Approx. 0.9 second
File format:
Still images: JPEG (DCF Ver. 2.0, Exif Ver. 2.3, MPF Baseline) compliant, DPOF compatible Movies: AVI (Motion JPEG)
Recording media: Internal Memory
(approx. 28 MB), “Memory Stick Duo” media, SD card
Flash: Flash range (ISO sensitivity
(Recommended exposure Index) set to Auto): Approx. 0.5 m to 3.0 m (1 ft 7 3/4 inches to 9 ft 10 1/8 inches) (W)/ approx. 0.5 m to 1.5 m (1 ft 7 3/4 inches to 4 ft 11 1/8 inches) (T)
[Input and Output connectors]
(USB)/A/V OUT terminal: Video output Audio output (Monaural) USB communication
USB communication: Hi-Speed USB
(USB 2.0)
[LCD screen]
LCD panel:
6.7 cm (2.7 type) TFT drive Total number of dots: 230 400 (960 × 240) dots
[Power, general]
Power: Rechargeable battery pack
NP-BN1, 3.6 V
Power consumption (during shooting):
0.99 W
Operating temperature: 0 °C to 40 °C
(32 °F to 104 °F)
Storage temperature: –20 °C to +60 °C
(–4 °F to +140 °F)
Dimensions (CIPA compliant):
96.3 mm × 55.6 mm × 21.2 mm (3 7/8 inches × 2 1/4 inches × 27/32 inches) (W/H/D)
Mass (CIPA compliant): Approx. 125 g
(4.4 oz) (including NP-BN1 battery pack and “Memory Stick Duo” media)
Microphone: Monaural Speaker: Monaural Exif Print: Compatible PRINT Image Matching III:
Compatible
22
GB
BC-CSN/BC-CSNB battery charger
Power requirements: AC 100 V to
240 V, 50 Hz/60 Hz, 2 W Output voltage: DC 4.2 V, 0.25 A Operating temperature: 0 °C to 40 °C
(32 °F to 104 °F) Storage temperature: –20 °C to +60 °C
(–4 °F to +140 °F) Dimensions: Approx. 55 mm × 24 mm
× 83 mm (2 1/4 inches ×
31/32 inches × 3 3/8 inches)
(W/H/D) Mass: Approx. 55 g (1.9 oz.)
Rechargeable battery pack NP-BN1
Used battery: Lithium-ion battery Maximum voltage: DC 4.2 V Nominal voltage: DC 3.6 V Maximum charge voltage: DC 4.2 V Maximum charge current: 0.9 A Capacity:
typical: 2.3 Wh (630 mAh)
minimum: 2.2 Wh (600 mAh)
Design and specifications are subject to change without notice.
Trademarks
• The following marks are trademarks of Sony Corporation.
“Memory Stick PRO Duo,” “Memory Stick PRO-HG Duo,” “Memory Stick Duo”
• Windows is registered trademark of Microsoft Corporation in the United States and/or other countries.
• Macintosh is registered trademark of Apple Inc.
• SDHC logo is trademarks of SD-3C, LLC.
• In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ or ® marks are not used in all cases in this manual.
, “Cyber-shot,”
Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website.
Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.
GB
GB
23

中文 (繁體字)

警告
為減少發生火災或電擊的危險,請勿讓本機暴露於雨中或受潮。
重要的安全指示 -請保存這些指示 危險 為了降低火災或電擊的危險,請小心遵守這些指示
如果插頭的形狀與電源插座不合,請使用適合電源插座的插頭轉接頭。
注意
[ 電池組
如果電池組處理不當,電池組可能會爆炸,造成火災,甚至化學灼傷。請遵循以下 注意事項。
切勿拆解。
切勿擠壓,撞擊電池組或對電池組用力過度,如敲擊,跌落或踩踏在電池組上。
切勿短路或讓金屬物品接觸到電池端子。
切勿暴露在超過60℃的高溫下,例如直射陽光下,或停在太陽下的汽車內。
切勿焚化或丟棄在火中。
切勿處理損壞或洩漏的鋰離子電池。
務必使用Sony原廠的充電器或可對電池組充電的裝置來為電池組充電。
電池組應放在幼兒不易觸及的地方。
使電池組保持乾燥。
請僅使用與Sony建議的相同或相等的電池類型進行更換。
請依照說明書中的說明正確丟棄舊電池組。
[ 電池充電器
即使CHARGE指示燈沒有點亮,只要還連接在牆上的插座上,電池充電器都沒有從交 流電源中斷連接。如果使用電池充電器時發生某些問題,請立即中斷插頭與牆上插 座的連接,以關閉電源。
CT
注意
[ 注意
特定頻率的電磁場可能會影響此機的畫面和聲音。
[ 通知
如果靜電或電磁導致資料傳送中斷 (失敗),請重新啟動應用程式或斷開連接,並 重新連接通信電纜 (USB等)。
僅適用於台灣
廢電池請回收
附屬電纜上附有鐵芯時的注意事項:USB電纜或A/V連接電纜或電源適配器之DC輸出 線上的一個鐵芯係抑制電磁波干擾用,請勿任意拆卸。
CT
CT
請參閱附件CD-ROM上的 “Cyber-shot使用者指南
(HTML)
關於進階操作的詳細資訊,請透過電腦閱讀CD-ROM (附件)上的
“Cyber-shot使用者指南”(HTML)。
將CD-ROM插入CD-ROM光碟機中。
對於Windows使用者:
1 按一下[使用者指南] t [安裝]。 2 從桌面上的捷徑啟動 “使用者指南”。
對於Macintosh使用者:
1 選擇[使用者指南],將儲存於[使用者指南]資料夾中的[ct]資料夾複
製到電腦。
2 複製完成後,按兩下[ct]資料夾中的 “index.html”。

檢查隨機附件

電池充電器BC-CSN/BC-CSNB (1)
電源線 (美國和加拿大非附件)(1)
充電電池組NP-BN1 (1)
專用USB線 (Sony Corporation 1-837-597-)(1)
腕帶 (1)
CD-ROM (1)Cyber-shot應用軟體“Cyber-shot使用者指南”
使用說明書 (本手冊)(1)
CT

認識各部件

H 揚聲器 I LCD螢幕 J (播放)按鈕 K 用來拍攝:W/T (變焦)按鈕
用來觀看: (播放變焦) 按鈕/ (索引)按鈕
L 腕帶掛鉤 M 模式開關 N (刪除)按鈕 O MENU按鈕 P 控制按鈕
功能表開啟:v/V/b/B/z 功能表關閉:DISP/ / /
Q 電池插入插槽 R 電池彈出控制桿 S 三腳架安裝孔
請使用螺絲長度小於5.5 mm的 三腳架。否則,您將無法固 定住相機,並有可能損壞相 機。
T 電池/記憶卡蓋 U 存取指示燈 V 記憶卡插槽 W (USB)/A/V OUT插孔
CT
A ON/OFF (電源)指示燈 B 快門按鈕 C ON/OFF (電源)按鈕 D 閃光燈 E 麥克風 F 自拍定時器指示燈/微笑快門
指示燈
G 鏡頭
CT

對電池組充電

對於在美國和加拿大的客戶
插頭
CHARGE指示燈
亮起:正在充電 熄滅:充電完成 (一般充電)
將電池組插入電池充電器。
1
即使電池已部分充電,仍然可以對電池充電。
將電池充電器連接到牆上的電源插座。
2
若在CHARGE指示燈熄滅後,仍繼續對電池組充電約一小時,電力將 能維持久一點 (完全充電)。
x
充電時間
完全充電時間:大約245分鐘 一般充電時間:大約185分鐘
注意事項
以上充電時間適用於在25℃溫度下對用盡的電池組進行充電。視使用情況和
環境而定,充電可能需要更長的時間。
將電池充電器連接到最近的牆上電源插座。
充電完成後,拔掉牆上電源插座上的電源線,並將電池組從電池充電器中取
出。
務必使用Sony原廠品牌的電池組或電池充電器。
對於在美國和加拿大以外國家 / 地區的客戶
電源線
CT
x
電池壽命與可以記錄/觀看的影像數目
電池壽命 (分鐘) 影像數
拍攝靜止影像 大約110 大約220 觀看靜止影像 大約170 大約3400 拍攝動態影像 大約110
注意事項
可記錄的影像數目是使用充滿電的電池組拍攝時的大約數目。視環境而定,
數目可能較少。
可記錄的影像數目是在以下條件拍攝時:
使用Sony “Memory Stick PRO Duo” (Mark2) (另售)。在25℃環境溫度下使用充滿電的電池組 (附件)。
可記錄的靜止影像數目是根據CIPA標準,在以下條件拍攝。
(CIPA: Camera & Imaging Products Association)
[SteadyShot]設定為[關]。DISP (畫面顯示設置)設定為[普通]。每30秒鐘拍一張。變焦在W與T端交替切換。每拍攝兩次閃光燈閃光一次。電源每拍攝十次開啟關閉一次。
動態影像的電池壽命是在以下條件拍攝時:
拍攝模式:VGA因為設定限制而結束連續拍攝時 (第 16頁),再次按下快門按鈕並繼續拍
攝。沒有操作變焦等拍攝功能。
CT
CT

插入電池組/記憶卡 (另售)

確定斜角插入方向正確。
打開電池蓋。
1
插入記憶卡 (另售)。
2
按照圖示的斜角方向插入記憶卡,直到其發出喀嗒聲。
插入電池組。
3
將電池組對準電池插入插槽內的指引箭號。然後插入電池組,直到 電池彈出控制桿鎖定到位。
關閉電池蓋。
4
在未正確插入電池的情況下關閉電池蓋可能會損壞相機。
CT
彈出控制桿
Loading...
+ 90 hidden pages