Sony cyber-shot dsc-w570,cyber-shot dsc-w580 Instruction Manual

4-264-164-92(1)

Digital Still Camera / Instruction Manual GB

Cámara fotografía digital / Manual de instrucciones ES

Câmera fotográfica digital / Manual de instruções PT

DSC-W570/W580

English

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product.

Model No. DSC-W570/W580 Serial No. ______________________________

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.

CAUTION

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking lithium ion batteries.

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that

can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

[ Battery charger

Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

The power cord (mains lead), if supplied, is designed specifically for use with this camera only, and should not be used with other electrical equipment.

For Customers in the U.S.A. and Canada

[ RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

For Customers in the U.S.A.

UL is an internationally recognized safety organization. The UL Mark on the product means it has been UL Listed.

If you have any questions about this product, you may call:

Sony Customer Information Center 1-800-222-SONY (7669).

The number below is for the FCC related matters only.

[ Regulatory Information

Declaration of Conformity

Trade Name: SONY Model No.: DSC-W570 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo,

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

San Diego, CA 92127 U.S.A.

Declaration of Conformity

Trade Name: SONY Model No.: DSC-W580 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo,

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

San Diego, CA 92127 U.S.A.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For Customers in Europe

[ Notice for the customers in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).

[ Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

[ Disposal of Old Electrical & Electronic Equipment (Applicable in

the European Union and other European countries with separate collection systems)

please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,

[ Disposal of waste batteries (applicable in the European Union

and other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.

potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

By ensuring these batteries are disposed of correctly, you will help prevent

Notice for customers in the United Kingdom

A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM

For details on advanced operations, please read “Cyber-shot User Guide” (HTML) on the CD-ROM (supplied) using a computer.

Insert the CD-ROM into the CD-ROM drive.

For Windows users:

1 Click [User Guide] t [Install]. 2 Start “User Guide” from the shortcut on the desktop.

For Macintosh users:

1 Select the [User Guide] and copy [eng] folder stored in [User Guide] folder

to your computer.

2 After copying is complete, double-click “index.html” in [eng] folder.

Checking the accessories supplied

• Battery charger BC-CSN/BC-CSNB (1)

• Power cord (mains lead) (not supplied in the USA and Canada) (1)

• Rechargeable battery pack NP-BN1 (1)

• USB, A/V cable for multi-use terminal (1)

• Wrist strap (1)

•CD-ROM (1)

– Cyber-shot application software – “Cyber-shot User Guide”

• Instruction Manual (this manual) (1)

Identifying parts

A ON/OFF (Power) button/Power

lamp

B Shutter button C Flash D Self-timer lamp/Smile Shutter

lamp/AF illuminator

E Microphone F Lens G LCD screen H (Playback) button

I For shooting: W/T (Zoom)

button For viewing: (Playback zoom) button/ (Index) button

J Mode switch K Hook for wrist strap L / (In-Camera Guide/Delete)

button

M MENU button N Control button

Menu on: v/V/b/B/z Menu off: DISP/ / / / Tracking focus

O Access lamp P Battery eject lever Q Battery insertion slot R Tripod receptacle

• Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.

S Speaker T Battery/memory card cover U Multi connector (Type3a) V Memory card slot W (TransferJet™) mark

Charging the battery pack

For customers in the USA and Canada

Plug

CHARGE lamp

Lit: Charging Off: Charging finished (normal charge)

Insert the battery pack into the battery charger.

• You can charge the battery even when it is partially charged.

Connect the battery charger to the wall outlet (wall

socket).

• If you continue charging the battery pack for about one more hour after the CHARGE lamp turns off, the charge will last slightly longer (full charge).

Charging time

Full charge time: approx. 245 min. Normal charge time: approx. 185 min.

Notes

• The above charging times apply when charging a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances.

• Connect the battery charger to the nearest wall outlet (wall socket).

• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.

• Be sure to use the battery pack or the battery charger of the genuine Sony brand.

For customers in countries/regions other than the USA and Canada

Power cord (Mains lead)

Battery life and number of images you can record/ view

Battery life (min.) Number of images

Shooting still images

Viewing still images

Shooting movies

Notes

• The number of images that can be recorded is an approximate number when shooting with a fully charged battery pack. The number may be less depending on the circumstances.

• The number of images that can be recorded is when shooting under the following conditions: – Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately). – When a fully charged battery pack (supplied) is used at an ambient temperature

of 25°C (77°F).

• The number of still images that can be recorded is based on the CIPA standard, and is for shooting under the following conditions. (CIPA: Camera & Imaging Products Association) – DISP (Screen Display Settings) is set to [Normal]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times.

• The battery life for movies is when shooting under the following conditions: – Recording mode: 720 FINE – When continuous shooting ends because of set limits (page 19), press the shutter

button down again and continue shooting. Shooting functions such as the zoom do not operate.

DSC-W570/ W580

DSC-W570 Approx. 290 Approx. 5800 DSC-W580 Approx. 280 Approx. 5600 DSC-W570/

W580

Approx. 110 Approx. 220

Approx. 100 —

Inserting the battery pack/a memory card (sold separately)

Ensure the notched corner faces correctly.

Open the cover.

Insert the memory card (sold separately).

• With the notched corner facing as illustrated, insert the memory card until it clicks into place.

Insert the battery pack.

• While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery eject lever locks after insertion.

Close the cover.

• Closing the cover with the battery inserted incorrectly may damage the camera.

Memory cards that you can use

Memory card For still images For movies

Memory Stick PRO Duo aa

Memory Stick PRO-HG Duo aa Memory Stick Duo a — SD memory card aa

SDHC memory card aa SDXC memory card aa

• In this manual, products in A are collectively referred to as “Memory Stick Duo” media.

• In this manual, products in B are collectively referred to as SD cards.

• When recording movies, it is recommended that you use Mark2 “Memory Stick Duo” media and Class 4 or faster SD cards.

To remove the memory card/battery pack

Memory card: Push the memory card in once. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

Note

• Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory.

Setting the clock

ON/OFF (Power)

Control button

Select items: v/V/b/B Set: z

Press the ON/OFF (Power) button.

Date & Time setting is displayed when you press the ON/OFF (Power) button for the first time.

• It may take time for the power to turn on and allow operation.

Set [Date & Time Format], [Daylight Savings] and

[Date & Time], then press [OK].

• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

Select the desired area following the instructions on the

screen, then press z t [OK].

Select the desired display color and display resolution

mode, following the instructions on the screen.

When an [In-Camera Guide] introductory message is

appeared on the screen, press [OK].

Shooting still images/movies

Shutter button

Mode switch

: Still image : Movie

Shooting still images

Press the shutter button halfway down to focus.

When the image is in focus, a beep sounds and the z indicator lights.

Press the shutter button fully down.

Shooting movies

Press the shutter button fully down to start recording.

• Use the zoom button to change the zoom scale.

Press the shutter button fully down again to stop

recording.

Notes

• The operating sound of the lens is recorded when the zoom function operates

while shooting a movie.

• You can shoot continuously for approximately 29 minutes at a time when the

temperature is 25°C (77°F) and camera is set to the factory settings. When shooting stops, you can press the shutter button again to restart shooting. Depending on the temperature when shooting, recording may automatically stop to protect the camera (page 21).

W: zoom out T: zoom in

Viewing images

W: zoom out T: zoom in

(Playback)

Control button

/ (Delete)

Select images: B (next)/b (previous) Set: z

Press the (Playback) button.

• When images on a memory card recorded with other cameras are played back on this camera, the registration screen for the data file appears.

Selecting next/previous image

Select an image with B (next)/b (previous) on the control button. Press z in the center of the control button to view movies.

Deleting an image

1 Press / (Delete) button. 2 Select [This Image] with v on the control button, then press z.

Returning to shooting images

Press the shutter button halfway down.

In-Camera Guide

This camera contains an internal function guide. This allows you to search the camera’s functions according to your needs.

(In-Camera Guide)

Press the / (In-Camera Guide) button.

• When viewing images, [Delete/In-Camera Guide] is displayed. Select

[In-Camera Guide].

Select a search method from [In-Camera Guide].

Shoot/playback guide: Search for various operation functions in shooting/viewing mode.

Icon guide: Search the function and meaning of displayed icons. Troubleshooting: Search common problems and their solution. Objective guide: Search functions according to your needs. Keyword: Search functions by key words. History: Display the last 12 items displayed in [In-Camera Guide].

Introduction of other functions

Other functions used when shooting or playing back can be operated using the Control button or MENU button on the camera. This camera is equipped with a Function Guide that allows you to easily select from the functions. While displaying the guide, try the other functions.

Control button

Function Guide

Control button

DISP (Screen Display Settings): Allows you to change the screen display.

(Self-Timer): Allows you to use the self-timer. (Smile Shutter): Allows you to use the Smile Shutter mode.

(Flash): Allows you to select a flash mode for still images.

Menu Items

Shooting

REC Mode Select recording mode.

Scene Selection Select pre-set settings to match various scene conditions.

Easy Mode Shoot still images using minimal functions.

Movie shooting scene

Panorama Shooting Scene

Select Underwater mode or Auto when shooting movies.

Select Sweep Panorama mode or Underwater Sweep Panorama mode when shooting panoramic images.

Shooting Direction

Image Size/ Panorama Image Size

Burst Settings Select single-image mode or burst mode.

EV Adjust the exposure manually.

ISO Adjust the luminous sensitivity.

White Balance Adjust color tones of an image.

Underwater White Balance

Focus Select the focus method.

Metering Mode

Scene Recognition

Soft Skin Effect Set the Soft Skin Effect and the effect level.

Smile Detection Sensitivity

Face Detection

DRO

Anti Blink

In-Camera Guide Search the camera’s functions according to your needs.

Set the direction to pan the camera when shooting Sweep Panorama images.

Select the image size for still images, panoramic images or movie files.

Adjust the color tones of an image shot underwater.

Select the metering mode that sets which part of the subject to measure to determine the exposure.

Set to automatically detect shooting conditions in Intelligent Auto mode.

Set the Smile Shutter function sensitivity for detecting smiles.

Select to detect faces and adjust various settings automatically.

Set DRO function to correct the brightness and contrast and improve the image quality.

Set to automatically shoot two images and select image in which the eyes are not blinking.

Viewing

Easy Mode

Slideshow Select a method of continuous playback.

Send by TransferJet

View Mode Select the display format for images.

Retouch Retouch an image using various effects.

Delete Delete an image.

Protect Protect the images.

DPOF Add a print order mark to a still image.

Rotate Rotate a still image to the left or right.

Select Folder

In-Camera Guide Search the camera’s functions according to your needs.

Setting items

Set the text-size increases and all indicators become easier to see.

Sends images from a Memory Stick with TransferJet to TransferJet-compatible devices.

Select a folder which contains the images you want to play back.

If you press the MENU button while shooting or during playback,

(Settings) is provided as a final selection. You can change the default

settings on the (Settings) screen.

Shooting Settings

Main Settings

Memory Card Tool

Clock Settings

* If a memory card is not inserted, (Internal Memory Tool) will be displayed and

only [Format] and [File Number] can be selected.

AF Illuminator/Grid Line/Disp. Resolution/Digital Zoom/Auto Orientation/Red Eye Reduction/Blink Alert

Beep/Language Setting/Function Guide/Display color/ Demo Mode/Initialize/COMPONENT/Video Out/USB Connect/LUN Setting/Download Music/Empty Music/ Power Save/TransferJet/Eye-Fi

Format/Create REC. Folder/Change REC. Folder/Delete

REC. Folder/Copy/File Number

Area Setting/Date & Time Setting

Number of still images and recordable time of movies

The number of still images and recordable time may vary depending on the shooting conditions and the memory card.

Still images

(Units: Images)

Capacity

Size

16M 3 265 VGA 165 11500 16:9(12M) 4 325

Movies

The table below shows the approximate maximum recording times. These are the total times for all movie files. Continuous shooting is possible for approximately 29 minutes. The maximum size of a movie file is up to approximately 2 GB.

Capacity

Size

1280×720(Fine) — 25m

1280×720(Standard) — 40m

VGA 1m

The number in ( ) is the minimum recordable time.

• The recordable time of movies varies because the camera is equipped with VBR (Variable Bit Rate), which automatically adjusts image quality depending on the shooting scene. When you record a fast-moving subject, the image is clearer but the recordable time is shorter because more memory is required for recording. The recordable time also varies depending on the shooting conditions, the subject or the image size settings.

Internal memory Memory card

Approx. 27 MB 2 GB

(h (hour), m (minute), s (second))

Internal memory Memory card

Approx. 27 MB 2 GB

(20m)

(25m)

(45s)

1h 20m

(1h)

Notes on using the camera

Changing the language setting

To change the language setting, press MENU t (Settings) t (Main Settings)

t [Language Setting].

On use and care

Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering, dropping or stepping on the product. Be particularly careful of the lens.

Functions built into this camera

This manual describes each of the functions of TransferJet-compatible/incompatible devices. To check if your camera supports the TransferJet function, check for the following mark on the bottom of the camera. TransferJet-compatible device: (TransferJet)

Notes on recording/playback

• Before you start recording, make a trial recording to make sure that the camera is working correctly.

• The camera is neither dust-proof, nor splash-proof, nor water-proof.

• Avoid exposing the camera to water. If water enters inside the camera, a malfunction may occur. In some cases, the camera cannot be repaired.

• Do not aim the camera at the sun or other bright light. It may cause the malfunction of the camera.

• If moisture condensation occurs, remove it before using the camera.

• Do not shake or strike the camera. It may cause a malfunction and you may not be able to record images. Furthermore, the recording media may become unusable or image data may be damaged.

Do not use/store the camera in the following places

• In an extremely hot, cold or humid place In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction.

• Under direct sunlight or near a heater The camera body may become discolored or deformed, and this may cause a malfunction.

• In a location subject to rocking vibration

• Near a location that generates strong radio waves, emits radiation or is strongly magnetic place. Otherwise, the camera may not properly record or play back images.

• In sandy or dusty places Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired.

On carrying

Do not sit down in a chair or other place with the camera in the back pocket of your trousers or skirt, as this may cause malfunction or damage the camera.

Carl Zeiss lens

The camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp images with excellent contrast. The lens for the camera has been produced under a quality assurance system certified by Carl Zeiss in accordance with the quality standards of Carl Zeiss in Germany.

Notes on the LCD screen and lens

The LCD screen is manufactured using extremely high-precision technology so over

99.99% of the pixels are operational for effective use. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording.

On camera’s temperature

Your camera and battery may get warm due to continuous use, but it is not a malfunction.

On the overheat protection

Depending on the camera and battery temperature, you may be unable to record movies or the power may turn off automatically to protect the camera. A message will be displayed on the LCD screen before the power turns off or you can no longer record movies.

Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

No compensation for damaged content or recording failure

Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc.

Cleaning the camera surface

Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. To prevent damage to the finish or casing: – Do not expose the camera to chemical products such as thinner, benzine, alcohol,

disposable cloths, insect repellent, sunscreen or insecticide.

On Illustrations

Illustrations used in this manual are of the DSC-W570 unless noted otherwise.

Specifications

Camera

[System]

Image device: 7.75 mm (1/2.3 type)

color CCD, Primary color filter

Total pixel number of camera:

Approx. 16.4 Megapixels

Effective pixel number of camera:

Approx. 16.1 Megapixels

Lens: Carl Zeiss Vario-Tessar 5× zoom

lens f = 4.5 mm – 22.5 mm (25 mm – 125 mm (35 mm film equivalent)) F2.6 (W) – F6.3 (T) While shooting movies (16:9): 28 mm – 140 mm While shooting movies (4:3):

34 mm – 170 mm SteadyShot: Optical Exposure control: Automatic exposure,

Scene Selection (12 modes) White balance: Automatic, Daylight,

Cloudy, Fluorescent 1/2/3,

Incandescent, Flash, One Push Underwater White Balance: Auto,

Underwater 1/2, One Push Recording interval for Burst mode:

Approx. 1.0 second File format:

Still images: JPEG (DCF Ver. 2.0,

Exif Ver. 2.3, MPF Baseline)

compliant, DPOF compatible

Movies: MPEG-4 Visual Recording media: Internal Memory

(Approx. 27 MB), “Memory Stick

Duo” media, SD cards

Flash: Flash range (ISO sensitivity

(Recommended Exposure Index) set to Auto): Approx. 0.2 m to 3.7 m (W) (7 7/8 inches to 12 feet 1 3/4inches) Approx. 1.0 m to 1.5 m (T) (3 feet 3 3/8 inches to 4 feet 11 1/8 inches)

[Input and Output connectors]

Multi use terminal: Type3a

(AV-out (SD/HD Component)/ USB/DC-in): Video output Audio output (Monaural) USB communication

USB communication: Hi-Speed USB

(USB 2.0)

[LCD screen]

LCD panel:

DSC-W570:

6.7 cm (2.7 type) TFT drive DSC-W580:

7.5 cm (3.0 type) TFT drive

Total number of dots:

230 400 (960 × 240) dots

[Power, general]

Power: Rechargeable battery pack

NP-BN1, 3.6 V AC-LS5 AC Adaptor (sold separately), 4.2 V

Power consumption (during shooting):

1.1 W

Operating temperature:

0°C to 40°C (32°F to 104°F)

Storage temperature:

–20°C to +60°C (–4°F to +140°F)

Dimensions:

DSC-W570: 91.0 mm × 51.5 mm ×

19.1 mm (3 5/8 inches × 2 1/8 inches × 25/32 inches) (W/H/D, excluding protrusions) DSC-W580: 94.0 mm × 56.0 mm ×

19.1 mm (3 3/4 inches × 2 1/4 inches × 25/32 inches) (W/H/D, excluding protrusions)

Mass (including NP-BN1 battery pack,

“Memory Stick Duo” media): DSC-W570: Approx. 116 g (4.1 oz) DSC-W580:

Approx. 127 g (4.5 oz) Microphone: Monaural Speaker: Monaural Exif Print: Compatible PRINT Image Matching III:

Compatible

BC-CSN/BC-CSNB battery charger

Power requirements: AC 100 V to

240 V, 50/60 Hz, 2 W Output voltage: DC 4.2 V, 0.25 A Operating temperature:

0°C to 40°C (32°F to 104°F) Storage temperature:

–20°C to +60°C (–4°F to +140°F) Dimensions:

Approx. 55 mm × 24 mm × 83 mm

(2 1/4 inches × 31/32 inches ×

3 3/8 inches) (W/H/D) Mass: Approx. 55 g (1.9 oz)

Rechargeable battery pack NP-BN1

Used battery: Lithium-ion battery Maximum voltage: DC 4.2 V Nominal voltage: DC 3.6 V Maximum charge voltage: DC 4.2 V Maximum charge current: 0.9 A

Capacity:

typical: 2.3 Wh (630 mAh) minimum: 2.2 Wh (600 mAh)

Design and specifications are subject to change without notice.

Trademarks

• The following marks are trademarks of Sony Corporation.

“Memory Stick PRO Duo,” “Memory Stick PRO-HG Duo,” “Memory Stick Duo”, TransferJet and the TransferJet logo

• Windows is registered trademark of Microsoft Corporation in the United States and/or other countries.

• Macintosh is registered trademark of Apple Inc.

• SDXC logo is a trademark of SD-3C, LLC.

• In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ or ® marks are not used in all cases in this manual.

, “Cyber-shot,”

Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website.

Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.

Español

Nombre del producto: Cámara Digital Modelo: DSC-W570/W580

POR FAVOR LEA DETALLADAMENTE ESTE MANUAL DE INSTRUCCIONES ANTES DE CONECTAR Y OPERAR ESTE EQUIPO.

RECUERDE QUE UN MAL USO DE SU APARATO PODRÍA ANULAR LA GARANTÍA.

AVISO

Para reducir el riesgo de incendio o descarga eléctrica, no exponga la unidad a la lluvia ni a la humedad.

INSTRUCCIONES DE SEGURIDAD IMPORTANTES

-GUARDE ESTAS INSTRUCCIONES PELIGRO PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA ELÉCTRICA, SIGA ATENTAMENTE ESTAS INSTRUCCIONES

Si la forma de la clavija no encaja en la toma de corriente, utilice un accesorio adaptador de clavija de la configuración apropiada para la toma de corriente.

PRECAUCIÓN

[ Batería

Si la batería se manipula indebidamente, puede explotar y causar un incendio o provocarle quemaduras químicas. Tenga en cuenta las siguientes precauciones.

• No desmonte el producto.

• No aplaste ni exponga la batería a impactos tales como golpes o caídas, ni la deje caer o la pise.

• No provoque un cortocircuito en la batería ni permita que objetos metálicos entren en contacto con sus terminales.

• No exponga la batería a temperaturas superiores a 60 °C como a la luz solar directa, o en el interior de un automóvil estacionado al sol.

• No la incinere ni la arroje al fuego.

• No manipule baterías de iones de litio dañadas o con fugas.

• Asegúrese de cargar la batería con un cargador de baterías original de Sony o con un dispositivo que pueda cargarla.

• Mantenga la batería fuera del alcance de niños pequeños.

• Mantenga la batería seca.

• Sustitúyala únicamente por otra del mismo tipo o equivalente recomendada por Sony.

• Deshágase de la baterías usada lo antes posible según el procedimiento que se describe

en las instrucciones.

[ Cargador de batería

Aunque la lámpara CHARGE no esté encendida, el cargador de batería no estará desconectado de la fuente de alimentación de ca en tanto que el mismo esté conectado a la toma de corriente de la pared. Si ocurre algún problema mientras utiliza el cargador de batería, interrumpa inmediatamente la alimentación desconectando la clavija de la toma d e corriente de la pared.

El cable de alimentación, si se ha suministrado, está diseñado de manera específica para utilizarse únicamente con esta cámara y no debería utilizarse con ningún otro equipo eléctrico.

Atención para los clientes en Europa

[ Aviso para los clientes de países en los que se aplican las

directivas de la UE

El fabricante de este producto es Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075, Japón. El representante autorizado en lo referente al cumplimiento de la directiva EMC y a la seguridad de los productos es Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Alemania. Para resolver cualquier asunto relacionado con el soporte técnico o la garantía, consulte las direcciones que se indican en los documentos de soporte técnico y garantía suministrados por separado.

Este producto se ha probado y cumple con la normativa que establece la Directiva EMC si se utiliza un cable de conexión de menos de 3 metros de longitud.

[ Atención

Los campos electromagnéticos a frecuencias específicas podrán influir en la imagen y el sonido de esta unidad.

[ Aviso

Si la electricidad estática o el electromagnetismo interrumpen la transmisión de datos (fallo), reinicie la aplicación o desconecte el cable de comunicación (USB, etc.) y vuelva a conectarlo.

[ Tratamiento de los equipos eléctricos y electrónicos al final de

su vida útil (aplicable en la Unión Europea y en países europeos con sistemas de recogida selectiva de residuos)

Este símbolo en el equipo o el embalaje indica que el presente producto no puede ser tratado como residuos domésticos normales, sino que debe entregarse en el correspondiente punto de recogida de equipos eléctricos y electrónicos. Al asegurarse de que este producto se desecha correctamente, Ud. ayuda a prevenir las consecuencias negativas para el medio ambiente y la salud humana que podrían derivarse de la incorrecta manipulación en el momento de deshacerse de este producto. El reciclaje

información detallada sobre el reciclaje de este producto, póngase en contacto con el ayuntamiento, el punto de recogida más cercano o el establecimiento donde ha adquirido el producto.

de materiales ayuda a conservar los recursos naturales. Para recibir

[ Tratamiento de las baterías al final de su vida útil (aplicable en la

Unión Europea y en países europeos con sistemas de recogida selectiva de residuos)

Este símbolo en la batería o en el embalaje indica que la batería proporcionada con este producto no puede ser tratada como un residuo doméstico normal. En algunas baterías este símbolo puede utilizarse en combinación con el símbolo químico. El símbolo químico del mercurio (Hg) o del plomo (Pb)

0,004% de plomo. Al asegurarse de que estas baterías se desechan correctamente, Ud. ayuda a prevenir las consecuencias negativas para el medio ambiente y la salud humana que podrían derivarse de la incorrecta manipulación en el momento de deshacerse de la batería. El reciclaje de materiales ayuda a conservar los recursos naturales. En el caso de productos que por razones de seguridad, rendimiento o mantenimiento de datos, sea necesaria una conexión permanente con la batería incorporada, esta batería solo deberá ser reemplazada por personal técnico cualificado para ello. Para asegurarse de que la batería será tratada correctamente, entregue el producto al final de su vida útil en un punto de recogida para el reciclado de aparatos eléctricos y electrónicos. Para las demás baterías, vea la sección donde se indica cómo quitar la batería del producto de forma segura. Deposite la batería en el correspondiente punto de recogida para el reciclado. Para recibir información detallada sobre el reciclaje de este producto o de la batería, póngase en contacto con el ayuntamiento, el punto de recogida más cercano o el establecimiento donde ha adquirido el producto.

se añadirá si la batería contiene más del 0,0005% de mercurio o del

Consulte la “Guía del usuario de Cyber-shot” (HTML) en el CD-ROM suministrado

Para más detalles sobre las operaciones avanzadas, lea la “Guía del usuario de Cyber-shot” (HTML) en el CD-ROM (suministrado) utilizando un ordenador.

Inserte el CD-ROM en la unidad de CD-ROM.

Para usuarios de Windows:

1 Haga clic en [Guía del usuario] t [Instalación]. 2 Inicie la “Guía del usuario” desde el acceso directo del escritorio.

Para usuarios de Macintosh:

1 Seleccione [Guía del usuario] y copie la carpeta [es] almacenada en la

carpeta [Guía del usuario] a su ordenador.

2 Después de haberse completado el copiado, haga doble clic en

“index.html” de la carpeta [es].

Comprobación de los accesorios suministrados

• Cargador de batería BC-CSN/BC-CSNB (1)

• Cable de alimentación (no suministrado en EE.UU. y Canadá) (1)

• Batería recargable NP-BN1 (1)

• Cable USB, A/V para terminal de usos múltiples (1)

• Correa para muñeca (1)

•CD-ROM (1)

– Software de aplicación del Cyber-shot – “Guía del usuario de Cyber-shot”

• Manual de instrucciones (este manual) (1)

Identificación de las partes

A Botón de ON/OFF

(Alimentación)/Lámpara de alimentación

B Botón del disparador C Flash D Lámpara del autodisparador/

Lámpara del captador de sonrisas/Iluminador AF

E Micrófono F Objetivo G Pantalla LCD H Botón (Reproducción)

I Para tomar imagen: Botón W/T

(Zoom) Para visualizar: Botón (Zoom de reproducción)/Botón

(Índice)

J Conmutador de modo K Gancho para correa de muñeca L Botón / (Guía en la cámara/

Borrar)

M Botón MENU N Botón de control

Menú visualizado: v/V/b/B/z Menú no visualizado: DISP/ /

/ /Enfoque seguido

O Lámpara de acceso P Palanca de expulsión de la

batería

Q Ranura de inserción de la batería R Rosca para trípode

• Utilice un trípode con un tornillo de menos de 5,5 mm de longitud. De lo contrario, no podrá sujetar firmemente la cámara, y es posible que se dañe la cámara.

S Altavoz T Tapa de la batería/tarjeta de

memoria

U Conector múltiple (Type3a) V Ranura de tarjeta de memoria W Marca (TransferJet™)

Carga de la batería

Para clientes en EE.UU. y Canadá

Clavija

Lámpara CHARGE

Iluminada: Cargando Apagada: Ha finalizado la carga (carga normal)

Inserte la batería en el cargador de batería.

• Puede cargar la batería incluso cuando esté parcialmente cargada.

Conecte el cargador de batería a la toma de corriente

de la pared.

• Si continúa cargando la batería durante aproximadamente una h (hora) más después de haberse apagado la lámpara CHARGE, la carga durará un poco más (carga completa).

Tiempo de carga

Tiempo de carga completa: aprox. 245 min (minuto) Tiempo de carga normal: aprox. 185 min (minuto)

Notas

• Los tiempos de carga de arriba se aplican cuando se carga una batería completamente agotada a una temperatura de 25 °C La carga podrá llevar más tiempo dependiendo de las condiciones de utilización y las circunstancias.

• Conecte el cargador de batería a la toma de corriente de la pared más próxima.

• Cuando finalice la carga, desenchufe el cable de alimentación de la toma de corriente de la pared, y extraiga la batería del cargador de batería.

• Asegúrese de utilizar la batería o el cargador de batería de la marca Sony genuina.

Para clientes en países/regiones distintos de EE.UU. y Canadá

Cable de alimentación

Duración de la batería y número de imágenes que se pueden grabar/ver

Duración de la baterí a

(min (minuto))

Toma de imágenes fijas

Visionado de imágenes fijas

Toma películas DSC-W570/

Notas

• El número de imágenes que se puede grabar es un número aproximado cuando las tomas se hacen con una batería completamente cargada. El número podrá ser inferior dependiendo de las circunstancias.

• El número de imágenes que se puede grabar es cuando las tomas se hacen en las condiciones siguientes: – Utilización de “Memory Stick PRO Duo” (Mark2) de Sony (se vende por

separado).

– Cuando se utiliza una batería (suministrado) completamente cargada a una

temperatura ambiente de 25 °C

• El número de imágenes fijas que se pueden grabar está basado en el estándar CIPA, y es para tomar imágenes en las condiciones siguientes. (CIPA: Camera & Imaging Products Association) – DISP (Config. Visualización pantalla) está ajustado a [Normal]. – Tomando una imagen cada 30 s (segundo) – Se cambia el zoom alternativamente entre los extremos W y T. – El flash destella una de cada dos veces. – La alimentación se activa y desactiva una vez cada diez veces.

• La duración de la batería para películas es cuando las tomas se hacen en las condiciones siguientes: – Modo de grabación: 720 FINE – Cuando finalice la toma continua debido a los límites establecidos (página 18),

pulse el botón del disparador otra vez y continúe tomando. Las funciones de toma tal como el zoom no responderán.

DSC-W570/ W580

DSC-W570 Aprox. 290 Aprox. 5 800 DSC-W580 Aprox. 280 Aprox. 5 600

W580

Aprox. 110 Aprox. 220

Aprox. 100 —

Número de imágenes

+ 98 hidden pages

Sony cyber-shot dsc-w570,cyber-shot dsc-w580 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

English

Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM

Checking the accessories supplied

Identifying parts

Charging the battery pack

Inserting the battery pack/a memory card (sold separately)

Setting the clock

Shooting still images/movies

Viewing images

In-Camera Guide

Introduction of other functions

Number of still images and recordable time of movies

Notes on using the camera

Specifications

Español

Consulte la “Guía del usuario de Cyber-shot” (HTML) en el CD-ROM suministrado

Comprobación de los accesorios suministrados

Identificación de las partes

Carga de la batería