RX Gain Control Amplifier
Description
CXA3201AN is an RX gain control amplifier suitable
for CDMA cellular/PCS phone.
Features
• Wide gain control range
• Linear gain slope
• Wideband operation (50MHz to 300MHz)
• Very small package (16 Pin SSOP)
• Low voltage operation
• Two input ports
• Power save function included
Absolute Maximum Ratings
• Supply voltage VCC 6V
•Operating temperature Topr –55 to +125 °C
• Storage temperature Tstg –65 to +150 °C
• Allowable Power dissipation PD 330 mW
• Supply voltage range –0.3 to 6 V
• Logic input voltage –0.3 to VCC + 0.3V
• Signal input voltage –0.3 to VCC + 0.3V
•
Differential signal input voltage
0 to 2.5 V
Operating Condition
Supply voltage VCC 2.7 to 3.8 V
Applications
CDMA cellular/PCS phone
Structure
Bipolar silicon monolithic IC
– 1 –
E98909A8Y
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
CXA3201AN
16 pin SSOP (Plastic)
– 3 –
CXA3201AN
Pin
No.
Symbol
Pin voltage
TYP (V)
Equivalent circuit Description
3
6
11
12
GND
Ground.
0
1 CDMA IN
Differential input pins for received
CDMA IF signal.
2
CDMA INX
1.15
1.15
Pin Description
7 MODE
Input select pin.
CDMA IN for High FM IN for Low.
—
8 PSV
Power save function pin.
High: Active
Low: Power save
—
4 FM IN
Differential input pins for received
FM IF signal.
5
FM INX
1.15
1.15