Sony CIA 2002 User Manual

Wadner_A8_UG_P2C.fm Page 1 Friday, October 14, 2005 9:29 AM
MMR-60 ENGLISH
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player and play the music you want to listen to.
2. Receiver: Tune into an unused (“white noise“) frequency channel.
3. Attach the MMR-60 to your phone.
frequency as for the receiver. To select the suggested frequency, press OK. To manually enter a frequency, press Edit. Delete the suggested frequency , enter the frequency you want (use * to enter .) and press OK twice.
Factors Affecting the Sound Quality:
Sound settings in the phone. Recommended: Set the volume level to 80% and the equalizer option to Normal.
Solid objects between the transmitter and the antenna of the receiver.
Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of different events:
Continual blinks - no connection
A few blinks at a rapid pace - confi rmation
Pulsating light - transmission
Turn Off the Pulsating Light Effect
You can turn off the light effect that indicates transmission. Go to Settings, the Connectivity tab, Accessories,
MMR-60 and select Light effect.
FRENCH
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player and play the music you want to listen to.
2. Receiver: Tune into an unused (“white noise“) frequency channel.
3. Attach the MMR-60 to your phone.
4. Phone: In the pop-up, select the same
frequency as for the receiver. To select the suggested frequency, press OK. To manually enter a frequency, press Edit. Delete the suggested frequency , enter the frequency you want (use * to enter .) and press OK twice.
Factors Affecting the Sound Quality:
Sound settings in the phone. Recommended: Set the volume level to 80% and the equalizer option to Normal.
Solid objects between the transmitter and the antenna of the receiver.
Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of different events:
Continual blinks - no connection
A few blinks at a rapid pace - confirmation
Pulsating light - transmission
Turn Off the Pulsating Light Effect
You can turn off the light effect that indicates transmission. Go to Settings, the Connectivity tab, Accessories,
MMR-60 and select Light effect.
SPANISH
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player and play the music you want to listen to.
2. Receiver: Tune into an unused (“white noise“) frequency channel.
3. Attach the MMR-60 to your phone.
4. Phone: In the pop-up, select the same
frequency as for the receiver. To select the suggested frequency, press OK. To manually enter a frequency, press Edit. Delete the suggested frequency , enter the frequency you want (use * to enter .) and press OK twice.
Factors Affecting the Sound Quality:
Sound settings in the phone. Recommended: Set the volume level to 80% and the equalizer option to Normal.
Solid objects between the transmitter and the antenna of the receiver.
Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of different events:
Continual blinks - no connection
A few blinks at a rapid pace - confirmation
Pulsating light - transmission
Turn Off the Pulsating Light Effect
You can turn off the light effect that indicates transmission. Go to Settings, the Connectivity tab, Accessories,
MMR-60 and select Light effect.
PORTUGUESE
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player and play the music you want to listen to.
2. Receiver: Tune into an unused (“white noise“) frequency channel.
3. Attach the MMR-60 to your phone.
frequency as for the receiver. To select the suggested frequency , press OK. To manually enter a frequency, press Edit. Delete the suggested frequency , enter the frequency you want (use * to enter .) and press OK twice.
Factors Affecting the Sound Quality:
Sound settings in the phone. Recommended: Set the volume level to 80% and the equalizer option to Normal.
Solid objects between the transmitter and the antenna of the receiver.
Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of different events:
Continual blinks - no connection
A few blinks at a rapid pace - confirmation
Pulsating light - transmission
Turn Off the Pulsating Light Effect
You can turn off the light effect that indicates transmission. Go to Settings, the Connectivity tab, Accessories,
MMR-60 and select Light effect.
ENGLISH
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player and play the music you want to listen to.
2. Receiver: Tune into an unused (“white noise“) frequency channel.
3. Attach the MMR-60 to your phone.
4. Phone: In the pop-up, select the same
frequency as for the receiver. To select the suggested frequency, press OK. To manually enter a frequency, press Edit. Delete the suggested frequency , enter the frequency you want (use * to enter .) and press OK twice.
Factors Affecting the Sound Quality:
Sound settings in the phone. Recommended: Set the volume level to 80% and the equalizer option to Normal.
Solid objects between the transmitter and the antenna of the receiver.
Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of different events:
Continual blinks - no connection
A few blinks at a rapid pace - confirmation
Pulsating light - transmission
Turn Off the Pulsating Light Effect
You can turn off the light effect that indicates transmission. Go to Settings, the Connectivity tab, Accessories, MMR-60 and select Light effect.
Draft for Sony Ericsson internal use only
MMR-60 Characteristics
Plays music from the Media player over the FM-radio frequency band.
Remembers the last used frequency.
Range of up to 10 meters.
Mutes the music during calls.
Powered by the phone.
Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
Follow regional guidelines/legislation for
use of FM-radio transmitters.
The MMR-60 will not work in Music only mode.
The MMR-60 are not to be used in air­planes.
MMR-60 Characteristics
Plays music from the Media player over the FM-radio frequency band.
Remembers the last used frequency.
Range of up to 10 meters.
Mutes the music during calls.
Powered by the phone.
Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
Follow regional guidelines/legislation for
use of FM-radio transmitters.
The MMR-60 will not work in Music only mode.
The MMR-60 are not to be used in air­planes.
MMR-60 Characteristics
Plays music from the Media player over the FM-radio frequency band.
Remembers the last used frequency.
Range of up to 10 meters.
Mutes the music during calls.
Powered by the phone.
Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
Follow regional guidelines/legislation for
use of FM-radio transmitters.
The MMR-60 will not work in Music only mode.
The MMR-60 are not to be used in air­planes.
MMR-60 Characteristics
Plays music from the Media player over the FM-radio frequency band.
Remembers the last used frequency.
Range of up to 10 meters.
Mutes the music during calls.
Powered by the phone.
Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
Follow regional guidelines/legislation for
use of FM-radio transmitters.
The MMR-60 will not work in Music only mode.
The MMR-60 are not to be used in air­planes.
MMR-60 Characteristics
Plays music from the Media player over the FM-radio frequency band.
Remembers the last used frequency.
Range of up to 10 meters.
Mutes the music during calls.
Powered by the phone.
Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
Follow regional guidelines/legislation for
use of FM-radio transmitters.
The MMR-60 will not work in Music only mode.
The MMR-60 are not to be used in air­planes.
Wadner_A8_UG_P2C.fm Page 2 Friday, October 14, 2005 9:29 AM
MMR-60 ENGLISH
Listen to Music Using the MMR-60
1. Phone: Open WALKMAN or Media player and play the music you want to listen to.
2. Receiver: Tune into an unused (“white noise“) frequency channel.
3. Attach the MMR-60 to your phone.
frequency as for the receiver. To select the suggested frequency, press OK. To manually enter a frequency, press Edit. Delete the suggested frequency , enter the frequency you want (use * to enter .) and press OK twice.
Factors Affecting the Sound Quality:
Sound settings in the phone. Recommended: Set the volume level to 80% and the equalizer option to Normal.
Solid objects between the transmitter and the antenna of the receiver.
Transmission on similar frequencies.
MMR-60 Light Effects
The following light effects notifies you of different events:
Continual blinks - no connection
A few blinks at a rapid pace - confi rmation
Pulsating light - transmission
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Turn Off the Pulsating Light Effect
You can turn off the light effect that indicates transmission. Go to Settings, the Connectivity tab, Accessories, MMR-60 and select Light effect.
MMR-60 Characteristics
Plays music from the Media player over the FM-radio frequency band.
Remembers the last used frequency.
Range of up to 10 meters.
Mutes the music during calls.
Powered by the phone.
Can be connected to any phone incorpo-
rating the Fast Port.
Important information!
Follow regional guidelines/legislation for
use of FM-radio transmitters.
The MMR-60 will not work in Music only mode.
The MMR-60 are not to be used in air­planes.
Draft for Sony Ericsson internal use only
LZT 108 8157/1 P1C
Loading...