Sony CBEH18C1, CBEH18Z1 User Manual

Safety and Support
Sécurité et support technique

CECH-3001A
CECH-3001B

4-291-560-11(1)

WARNING

To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.

Caution
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.

The use of optical instruments with this product
will increase eye hazard.

Photosensitivity/Epilepsy/Seizures

A very small percentage of individuals may experience epileptic
seizures or blackouts when exposed to certain light patterns or
flashing lights. Exposure to certain patterns or backgrounds on a
television screen or when playing video games may trigger epileptic
seizures or blackouts in these individuals. These conditions may
trigger previously undetected epileptic symptoms or seizures in
persons who have no history of prior seizures or epilepsy. If you, or
anyone in your family, has an epileptic condition or has had seizures
of any kind, consult your doctor before playing.

IMMEDIATELY DISCONTINUE use and consult your doctor before
resuming gameplay if you or your child experience any of the
following health problems or symptoms:

• dizziness,

• altered vision,

• eye or muscle twitches,

• loss of awareness,

• disorientation,

• seizures, or

• any involuntary movement or convulsion.

RESUME GAMEPLAY ONLY ON APPROVAL OF YOUR
DOCTOR.

This appliance is classified as a CLASS 1 LASER product under
IEC60825-1:2007.

EN

2

Use and handling of video games to reduce the
likelihood of a seizure

• Use in a well-lit area and keep as far away as possible from the
television screen.

• Avoid large screen televisions. Use the smallest television screen
available.

• Avoid prolonged use of the PS3™ system. Take a 15-minute break
during each hour of play.

• Avoid playing when you are tired or need sleep.

3D images

Some people may experience discomfort (such as eye strain, eye
fatigue, or nausea) while watching 3D video images or playing
stereoscopic 3D games on 3D televisions. If you experience such
discomfort you should immediately discontinue use of your
television until the discomfort subsides.
SCE recommends that all viewers take regular breaks while
watching 3D video, or playing stereoscopic 3D games. The length
and frequency of necessary breaks may vary from person to person

- please take breaks that are long enough to allow any feelings of
discomfort to subside. If symptoms persist, consult your doctor.
The vision of young children (especially those under six years old) is
still under development. SCE recommends that you consult with a
doctor (such as a pediatrician or eye doctor) before allowing a
young child to watch 3D video images or play stereoscopic 3D
games. Adults should supervise young children to ensure they
follow the recommendations listed above. When using any 3D
enabled device with your PlayStation®3 system you should read the
instruction manual for that device and check
www.us.playstation.com/support/3D for updated information.

Radio waves

Radio waves may affect electronic equipment or medical devices
(for example, pacemakers), which may cause malfunctions and
possible injuries.

• If you use a pacemaker or other medical device, consult your
doctor or the manufacturer of your medical device before using
the wireless networking feature (Bluetooth® and wireless LAN).

• Do not use the wireless networking feature in the following
locations:
– Areas where wireless network use is prohibited, such as in

hospitals. Abide by medical institution regulations when using
the system on their premises.

– Areas near fire alarms, automatic doors and other types of

automated equipment.

About the lithium coin memory back-up battery

The lithium coin memory back-up battery inside this product
contains Perchlorate. The following statement is required by the
State of California, USA:
Perchlorate Material - special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate

FCC and IC notice

This equipment complies with FCC/IC radiation exposure limits set
forth for uncontrolled environment and meets the FCC radio
frequency (RF) Exposure Guidelines in Supplement C to OET65 and
RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated with at least 20 cm (8
in) and more between the radiator and person’s body (excluding
extremities: hands, wrists, feet and ankles).
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
The wireless controller complies with FCC/IC radiation exposure
limits set forth for uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines in Supplement C to
OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that are deemed to
comply without testing of specific absorption rate (SAR).

NOTE:

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against

EN

3

harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for

help.

You are cautioned that any changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

EN

4

If you have questions about this product, call our technical
support line at 1-800-345-7669 or write to:
Sony Computer Entertainment America LLC
Consumer Services/Technical Support
PO Box 5888, San Mateo, CA 94402-0888 U.S.A.

Declaration of Conformity

Trade Name :
Model No. :
Responsible Party :
Address :

Telephone No. :
This device complies with Part 15 of the FCC Rules and RSS-

Gen of IC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

SONY
CECH-3001A and CECH-3001B
Sony Electronics Inc.
16530 Via Esprillo
San Diego, CA 92127 U.S.A.
858-942-2230

Precautions

Before using this product, carefully read all the precautions.

Safety

This product has been designed with the highest concern for safety.
However, any electrical device, if used improperly, has the potential
for causing fire, electrical shock or personal injury. To help ensure
accident-free operation, follow these guidelines:

• Observe all warnings, precautions and instructions.

• Regularly inspect the AC power cord for damage.

• Stop use, unplug the AC power cord from the electrical outlet and
disconnect any other cables immediately if the device functions in
an abnormal manner, produces unusual sounds or smells or
becomes too hot to touch.

• For more information on product safety and support, visit our
website ( back cover).

Use and handling

• Do not use the system in a closed cabinet or other locations where
heat may build up. Doing so may cause the system to overheat
and may lead to fire, injury or malfunction.

• If the system's internal temperature becomes elevated, the power
indicator will flash alternately in red and green. In this case, turn
off the system and leave it unused for a while. After the system
cools down, move it to a location with good ventilation, and then
resume use.

• Use in a well-lit area and keep as far away as possible from the
television screen.

• Avoid prolonged use of the PS3™ system and wireless controller.

• Stop using the system immediately if you begin to feel tired or if
you experience discomfort or pain in your hands or arms while
operating the wireless controller. If the condition persists, consult
a doctor.

• If you experience any of the following health problems,
discontinue use of the system immediately. If symptoms persist,
consult with your doctor.
– Dizziness, nausea, fatigue or symptoms similar to motion

sickness

– Discomfort or pain in a part of the body, such as eyes, ears,

hands or arms

• Keep the system and accessories, including cable ties and
fasteners, out of the reach of small children.

• Do not connect cables other than a USB cable while the system is
turned on (power indicator is lit solid green).

• Any TV or component connected to the system must be
functioning properly and free of defects. If a TV or component
connected to the system is faulty or defective, it may cause
damage to the TV or component, or to the system itself. As with all
electrical products, connection to faulty or defective components,
or the failure to connect to a properly wired outlet, may cause
sparking and pose a fire hazard.

• Do not touch the system or connected cables or accessories
during an electrical storm.

• Do not use the system or accessories near water.

• Do not allow liquid, small particles or other foreign objects to get
into the system or accessories.

• Do not touch the connectors of the system or accessories.

• Do not expose the system or accessories to dust, smoke or steam.
Also, do not place the system in an area subject to excessive dust
or cigarette smoke. Dust build-up or cigarette smoke residue on
the internal components (such as the lens) may cause the system
to malfunction.

• Do not expose the system or accessories to high temperatures,
high humidity or direct sunlight.

• Do not place the system or accessories on surfaces that are
unstable, tilted or subject to vibration.

• Do not set the system other than in the vertical or horizontal
position. When setting the system in the vertical position, use the
vertical stand (sold separately) for this model of the system. Also,
do not change the position of the system while it is turned on.

• Be careful when carrying the system. If you do not have a good
grip, the system may drop causing potential damage or injury.

• Do not turn off the system while data is being saved on or loaded
from the hard disk.

• Do not move or change the position of the system while the power
indicator is lit solid green or flashing green. The vibration that

EN

5

occurs as a result of moving the system may cause data loss or
corruption, or damage to the system.

• Do not stand on or put objects on the system, and do not stack the
system with other devices.

• Do not place the system and connected accessories on the floor
or in a place where they may cause someone to trip or stumble.

• Do not allow bodily contact with the system or air from the system
vents for an extended period of time while in use. Extended
contact under these conditions may cause low-temperature
burns.

• When connecting the system to a plasma or projection* TV, do not
leave a still image on the TV screen for an extended period of time,
as this may leave a faint image permanently on the screen.
* Except LCD screen types

• Parents are encouraged to monitor children in online activities to
ensure safe and responsible Internet usage.

About the USB device

If "An unknown USB device has been connected" is displayed on­screen, the reason may be one of the following:

• The connected USB device is not compatible with the system.

• The connected USB device is compatible with only some software
titles.

• Too many USB devices are connected to the USB hub.

Notes on safety when using the DUALSHOCK®3
Wireless Controller*

• Stop using the system immediately if you begin to feel tired or if
you experience discomfort or pain in your hands or arms while
operating the DUALSHOCK®3 Wireless Controller. If the condition
persists, consult a doctor.

• The vibration function of the DUALSHOCK®3 Wireless Controller
can aggravate injuries. Do not use the vibration function if you

EN

6

have any ailment or injury to the bones, joints or muscles of your
hands or arms. If you have an ailment or an injury, do not play
software titles that contain the vibration function using the
DUALSHOCK®3 Wireless Controller unless you have set the
vibration function to [Off].

• Avoid prolonged use of the DUALSHOCK®3 Wireless Controller.
Take a break at about 30-minute intervals.

• Note that some software titles set the vibration function to [On] by
default. To disable the vibration function, press the PS button of
the controller, and then select [Controller Settings] [Vibration
Function] [Off]

• When using the motion sensor function of the wireless controller,
be cautious of the following points. If the controller hits a person
or object, this may cause accidental injury or damage.
– Before using, check that there is plenty of space around you.
– When using the controller, grip it firmly to make sure it cannot

slip out of your hand.

– If using a controller that is connected to the PS3™ system with a

USB cable, make sure there is enough space for the cable so
that the cable will not hit a person or object. Also, take care to
avoid pulling the cable out of the PS3™ system while using the
controller.

– Some PlayStation® and PlayStation®2 peripherals such as the

analog controller (DUALSHOCK®) and analog controller
(DUALSHOCK®2) are not compatible with the PS3™ system.
For details, visit www.us.playstation.com.

* These notes may also apply to other controllers.

Vents

Do not block any vents. To maintain good ventilation, follow the
guidelines below:

• Place the system at least 10 cm (4 in) away from a wall surface.

• Do not place on a carpet or rug with long fibers.

• Do not place in a narrow or cramped space.

• Do not cover with cloth.

• Do not allow dust to build up on the vents.

AC power cord use

• Any TV or component connected to the system must be
functioning properly and free of defects. If a TV or component is
faulty or defective, it may cause damage to the TV or component,
or to the system itself. As with all electrical products, connection
to faulty or defective components, or the failure to connect to a
properly wired outlet, may cause sparking and pose a fire hazard.

• Do not plug the AC power cord for the system into an electrical
outlet until you have made all other connections. Make sure the TV
or other component is unplugged from the electrical outlet prior to
connecting it to the system.

• To help ensure safe operation, regularly inspect the AC power
cord. If damaged, stop use immediately and contact SCEA
Consumer Services ( back cover).

• Do not use a power cord other than the supplied AC power cord.
Do not modify the cord.

• Do not touch the plug of the AC power cord with wet hands.

• Protect the AC power cord from being walked on or pinched
particularly at plugs, expansion receptacles and the point where
the cord exits from the system.

• Do not place heavy items on the cord.

• Do not place the AC power cord near heating equipment and do
not expose the cord to heat.

• Unplug the AC power cord from the electrical outlet before
cleaning or moving the system, or when you do not intend to use
the system for an extended period of time. When disconnecting,
grasp the power cord by the plug and pull straight out of the
electrical outlet. Never pull by the cord and do not pull out at an
angle.

• Do not connect the AC power cord to a voltage transformer or
inverter. Connecting the AC power cord to a voltage transformer

for overseas travel or an inverter for use in an automobile may
cause heat to build up in the system and may cause burns or a
malfunction.

Never disassemble or modify the system or
accessories

Use the PS3™ system and accessories according to the instructions
in the product documentation. No authorization for the analysis or
modification of the system or accessories, or the analysis and use of
its circuit configurations, is provided. Unauthorized modification of
the system or accessories will void your warranty. There are no user
serviceable components inside the PS3™ system (the supplied hard
disk may be removed but not disassembled or modified).
Additionally, there is a risk of exposure to laser radiation as well as
to electrical shock.

Network

• A broadband connection is required to access the Internet. Note
that dial-up connectivity is not supported.

• User is responsible for Internet service fees. For details, refer to
the information provided in your service contract or contact your
Internet service provider.

• Do not use a cord for a standard residential telephone line or
cables of types other than those mentioned here. Using the wrong
type of cord or cable can cause more electrical current than
necessary to flow through the LAN connector, which may lead to
heat build-up, fire or malfunction.

Wireless networking feature

• The 2.4 GHz range of radio waves used by the wireless
networking feature of this product is a range shared by various
devices. This product has been designed to minimize the effect of

EN

7

other devices using the same range. However, in some cases
interference from other devices may reduce the connection
speed, shorten the signal range or cause the connection to be
terminated unexpectedly.

• When using the PS3™ system’s scan function to select a wireless
LAN access point, access points that are not intended for public
use may be displayed. Only connect to an access point that you
are authorized to use.

Moisture condensation

If the system or disc is brought directly from a cold location to a
warm one, moisture may condense on the lens inside the system or
on the disc. Should this occur, the system may not operate properly.
In this case, remove the disc and turn off and unplug the system. Do
not put the disc back in until the moisture evaporates (this may take
several hours). If the system still does not operate properly, contact
SCEA Consumer Services ( back cover).

Specifications

Design and specifications are subject to change without notice.
Information about system functionality and images published in this
document may vary from those for your PS3™ system, depending on
the system software version in use.

PlayStation®3 system

CPU Cell Broadband Engine

GPU RSX

EN

8

™

Audio output

Memory

Hard disk 2.5" Serial ATA

Inputs/
outputs

Networking

Controller

AV output

™

BD/DVD/
CD drive
(read only)

Hi-Speed USB

*3

(USB 2.0)

Resolution

HDMI™ OUT
connector

AV MULTI OUT
connector

Digital out (optical)
connector

Maximum read
rate

LPCM 7.1ch, Dolby Digital,
Dolby Digital Plus, Dolby
TrueHD, DTS, DTS-HD, AAC

256 MB XDR Main RAM,
256 MB GDDR3 VRAM

160 GB
320 GB

2

Ethernet (10BASE-T,
100BASE-TX,

IEEE 802.11 b/g
Bluetooth® 2.0 (EDR)

Wireless Controller
(Bluetooth®)

1080p, 1080i, 720p, 480p,
480i

1

*4

1

1

BD × 2 (BD-ROM)
DVD × 8 (DVD-ROM)
CD × 24 (CD-ROM)

*1*2

(CECH-3001A)

*1*2

(CECH-3001B)

1000BASE-T) × 1

Type: Semiconductor,
continuous
BD

Wavelength: 400 - 410 nm

Laser

Power 120 V AC, 60 Hz

Power consumption Approx. 200 W

External dimensions
(excluding maximum projecting
part)

Mass Approx. 2.6 kg (5.7 lb)

Operating temperature 5°C - 35°C (41°F - 95°F)

*1 Hard disk capacity calculated using base 10 mathematics (1GB

= 1,000,000,000 bytes). The system software for this PS3™
system calculates capacity using binary mathematics (1GB =
1,073,741,824 bytes) and consequently displays lower capacity
and free space. The difference in displayed values does not
indicate a difference in the actual number of bytes.

*2 A portion of the hard disk capacity is reserved for use in

connection with system administration, maintenance, and
additional options. This may occur upon installation of system
software or other software. As a result, the availability of hard disk
capacity may vary depending on the system, system software
version, or available options, and is not otherwise available for
your use.

Power: Max. 17.5 mW

DVD

Wavelength: 655 - 664 nm
Power: Max. 2.6 mW

CD

Wavelength: 770 - 800 nm
Power: Max. 4.0 mW

Approx. 290 × 65 × 290 mm
(11.5 × 2.6 ×11.5 in)
(width × height × length)

*3 Functionality of all connected devices is not guaranteed.
*4 "3D", "Deep Color", "x.v.Color" and "HD lossless audio format" are

supported.

Playable discs

For additional information on compatible media types, visit our
website at www.us.playstation.com.

PlayStation®3 format BD-ROM

Blu-ray Disc™ (BD)

DVD

CD

*1 Playback of BD-RE ver. 1.0 discs is not supported.
*2 This model of the PlayStation®3 system is designed to play

PlayStation®3 format software and has limited backward
compatibility. This system is not compatible with and will not play
PlayStation®2 format software. Some PlayStation® format
software may play on this system. For more information, visit
www.us.playstation.com.

*3 Playback of Super Audio CDs is not supported.

BD-ROM
BD-R

*1

BD-RE

DVD-ROM
DVD+R/RW

DVD-R/RW

AVCHD
DSD Disc

PlayStation® format CD-ROM

CD-DA (audio CD)
CD-R/RW

*3

*2

EN

9

DUALSHOCK®3 Wireless Controller

Input power rating DC 5V, 500mA

Battery
Specifications

Mass Approx. 180 g (6.3 oz)

Battery type

Voltage DC 3.7 V

Battery capacity 610 mAh

Built-in rechargeable Lithium­Ion battery

Supplied AV cable and USB cable

AV cable Company: SONY

USB cable Company: SONY

Part No.: 1-838-149-31

Part No.: 1-833-625-21

Region codes

Depending on the disc, a region code that is based on the
geographic region where the disc is distributed may be assigned.
This system can play discs marked with the following region codes.

Disc Region code

Blu-ray Disc (BD)

10

DVD

EN

ALL

Disc Region code

PlayStation®3 format BD­ROM

PlayStation® format CD­ROM

DVD and PlayStation®3 format software

• When outputting DVD content or PlayStation®3 format software in
SD resolution, only discs recorded in the NTSC standard can be
played.

• When playing PlayStation®3 format software in HD resolution, a TV
that supports video playback at 59.94 Hz is required.

DVD-R/DVD-RW/DVD+R/DVD+RW discs

Discs that have not been finalized cannot be played.

Notices

• Use only circular-shaped discs with the system. Do not use
irregularly-shaped discs (for example, heart- or star-shaped
discs). Using irregularly-shaped discs may cause a malfunction.

• Do not use damaged, re-shaped or repaired discs. Use of such
discs may cause a malfunction.

• When using an 8 cm disc, insert the disc in the system without an
adaptor.

• The audio CD playback feature of this system is designed to
conform to the Compact Disc (CD) standard. Recently, some
record companies have started marketing music discs encoded
with copyright protection technologies. Some of these music discs
do not conform to the CD standard and may not be playable on
this system.

• A DualDisc is a dual-sided disc that combines a DVD side and an
audio side. Note that the audio side is not guaranteed to play
because this type of disc does not conform to the specifications
required for an audio Compact Disc (CD).

• If a device that is not compatible with the HDCP (High-bandwidth
Digital Content Protection) standard is connected to the system
using an HDMI cable, video or audio cannot be output from the
system.

• Copyright-protected Blu-ray video discs can only be output at
1080p using an HDMI cable connected to a device that is
compatible with the HDCP (High-bandwidth Digital Content
Protection) standard.

• When the PS3™ system is connected to a TV using a component
AV cable, analog high-definition output is restricted to comply with
the copyright protection technology used by Blu-ray (AACS). BD
video software (BD-ROM) and BDs recorded with copyright­protected video content are output at interlaced standard
definition (SD) resolution.

• When you use the AV MULTI OUT connector of the system to
connect to a TV, the resolution used to output copyright-protected
video from a BD or from video files may be limited or the video may
not be output.

• When playing discs with content that was copied fraudulently,
abnormal sounds may be produced or the content may not play
correctly.

• To enjoy continuous playback of copyright-protected BDs, the
encryption key for AACS (Advanced Access Content System) may
need to be renewed. To renew the key, you must update the
system software.

• Some discs may not be playable due to scratches, dust, the
quality of recording, or the characteristics of the recording device.

• In rare instances, CDs, DVDs, BDs and other media may not
operate properly when played on the PS3™ system. This is
primarily due to variations in the manufacturing process or
encoding of the software.

Wireless controller battery

Caution

• If you come into contact with material from a leaking battery, take
the following actions:
– If the material gets into the eyes, do not rub. Immediately flush

the eyes with clean water and seek medical attention.

– If the material comes into contact with the skin or clothes,

immediately rinse the affected area with clean water. Consult
your doctor if inflammation or soreness develops.

• Do not allow the battery to come into contact with fire or subject it
to extreme temperatures such as in direct sunlight, in a vehicle
exposed to the sun or near a heat source.

Wireless controller battery life

• The battery has a limited lifespan. Battery duration will gradually
decrease with repeated usage and age.

• Battery life also varies depending on the storage method, usage
state, environment and other factors.

Storage

When the wireless controller is not used for an extended period of
time, it is recommended that you fully charge it at least once a year
in order to maintain battery functionality.

When disposing of the wireless controller

The lithium-ion battery of the wireless controller is recyclable. When
disposing of the wireless controller, remove the battery and follow
local regulations regarding disposing of batteries.

EN

11

Caution

• Remove the battery in a location out of the reach of small children
to help prevent accidental swallowing of small parts such as the
screws.

• Be careful not to hurt your nails or fingers when removing the
controller casing.

• For safety reasons, attach tape or a seal on the metal part of the
battery before disposing.

Notice

Other than when disposing of the wireless controller, never remove
the screws and never remove the battery from the wireless
controller.

1 Disconnect the USB cable from the wireless

controller.

2 Using a crosshead screwdriver, remove the

screws (5 places).

EN

12

3 Remove the casing.

1 Push in the direction of the arrow.
2 Pull the casing apart.

4 After disconnecting the connector, remove the

battery.

Connector

Battery