Sony Bravia KLV-52W400A, Bravia KLV-46W400A, Bravia KLV-40W400A, Bravia KLV-32W400A Operating Instructions Manual
LCD Colour TV
Operating Instructions
KLV-52W400A
KLV-46W400A
KLV-40W400A
KLV-32W400A
© 2008 Sony Corporation 3-295-292-14(1)
Introduction Trademark information
Thank you for choosing this Sony product.
Before operating the TV, please read this manual
thoroughly and retain it for future reference.
• HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
• “BRAVIA” and are trademarks of Sony
Corporation.
GB
2
Table of Contents
Start-up Guide 4
Safety information .....................................................................................................................9
Precautions .............................................................................................................................11
Overview of the remote ........................................................................................................12
Overview of the TV buttons and indicators ........................................................................14
Watching TV
Watching TV............................................................................................................................ 15
Using the Favourite List ..........................................................................................................17
Using Optional Equipment
Connecting optional equipment............................................................................................... 18
Viewing pictures from the connected equipment ....................................................................20
Using BRAVIA Sync (Control for HDMI) .................................................................................21
Using Menu Functions
Navigating through menus ......................................................................................................22
Picture menu ........................................................................................................................... 23
Sound menu............................................................................................................................ 25
Screen menu...........................................................................................................................27
Set-up menu............................................................................................................................ 29
PC Settings menu ...................................................................................................................33
Channel Set-up menu .............................................................................................................34
Additional Information
Specifications ..........................................................................................................................37
Troubleshooting ......................................................................................................................39
GB
3
Start-up Guide
1: Checking the
accessories
Stand (1) and screws (3) (KLV-32W400A)
Stand (1) and screws (4) (KLV-46/40W400A)
Remote RM-GA011 (1)
Size AA batteries (R6 type) (2)
To insert batteries into the remote
Push and lift the cover to open.
~
• Observe the correct polarity when inserting batteries.
• Do not use different types of batteries together or mix old
and new batteries.
• Dispose of batteries in an environmentally friendly way.
Certain regions may regulate the disposal of batteries.
Please consult your local authority.
• Handle the remote with care. Do not drop or step on it, or
spill liquid of any kind onto it.
• Do not place the remote in a location near a heat source, a
place subject to direct sunlight, or a damp room.
2: Attaching the stand
1 Place the TV onto the stand by aligning the
screw hole alignment lines over the stand
as shown.
2 Fix the TV to the stand according to the
arrow marks that guide the screw holes
using the supplied screws.
~
• This TV is very heavy, so two or more people should place
the TV on the stand.
• If using an electric screwdriver, set the tightening torque
at approximately 1.5N·m (15kgf·cm).
• When installing the TV onto the wall, follow step 1 to
prevent the TV panel from falling over.
GB
4
3: Connecting an
4: Preventing the TV
Start-up Guide
antenna/cable/VCR
Connecting an antenna/cable
Antenna cable (not supplied)
Connecting an antenna/cable and VCR
from toppling over
Audio/Video
cable (not
supplied)
Antenna cable (not
VCR
supplied)
S-Video
cable
(not
supplied)
Antenna
cable (not
supplied)
1 Install a wood screw (4 mm in diameter, not
supplied) in the TV stand.
2 Install a machine screw (M5 × 12, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine screw
with a strong cord.
GB
5
5: Bundling the cables
7: Performing the initial
set-up
6: Connecting the AC
power cord
* Type of AC power cord supplied (with or without the
ferrite core) varies depending on the countries.
3, 4, 5, 6, 9, 10
8
1 Connect the TV to your AC power outlet
(110–240 V AC, 50/60 Hz).
2 Press 1 on the top edge of the TV.
When you turn on the TV for the first time, the
Language menu appears on the screen.
3 Press F/f to select the language
displayed on the menu screens, then press
.
GB
6
4 Press F/f to select the country/region,
then press .
~
Area 1: Asia (except Philippines), Middle East, Africa and
Oceania.
Area 2: Philippines.
5 Press F/f to select “Home”, then press .
6 Press G/g to select “OK”, then press .
9 Press F/f/G/g to select the item, then
press to set the following:
– Day and time
– Control for HDMI
10Press G/g to select the desired setting in
“Display this menu next time?” dialogue,
then press to exit.
z
If “Yes” is selected and the TV is turned off by pressing 1
on the TV, or is disconnected from the AC power outlet, the
initial set-up procedure restarts the next time t he TV is turned
on.
Adjusting the viewing
angle of the TV
This TV can be adjusted within the angles shown
below.
Adjust the angle left and right (swivel)
Top view
Start-up Guide
The TV starts searching for all available channels.
This may take some time, so do not press any
buttons on the TV or remote while proceeding.
If a message appears for you to confirm the
antenna connection
No channels were found. Check the antenna
connection and select “Confirm”, then press to
start auto tuning again.
7 When the Programme Sorting menu
appears on the screen, follow the steps of
“Programme Sorting” on page 34.
If you do not wish to change the order in which the
channels are stored on the TV, go to step 8.
8 Press MENU to exit.
The TV has now tuned in all the available
channels.
Front
GB
7
Detaching the TableTop Stand from the TV
~
• Remove the screws guided by the arrow marks of the
TV.
• Do not remove the Table-Top Stand for any reason other
than to wall-mount the TV.
KLV-52/46/40W400A
KLV-32W400A
GB
8
Safety information
Installation/Set-up
Install and use the TV set in accordance with the
instructions below in order to avoid any risk of fire,
electrical shock or damage and/or injuries.
Installation
• The TV set should be installed near an easily accessible
AC power outlet.
• Place the TV set on a stable, level surface to avoid it from
falling down and cause personal injury or damage to the
TV.
• Only qualified service personnel should carry out wall
installations.
• For safety reasons, it is strongly recommended that you
use Sony accessories, including:
– Wall-mount bracket SU-WL500
• Be sure to use the screws supplied with the Wall-mount
bracket when attaching the mounting hooks to the TV set.
The supplied screws are designed so that they are 8 mm to
12 mm in length when measured from the attaching
surface of the mounting hook.
The diameter and length of the screws differ depending on
the Wall-mount bracket model.
Use of screws other than those supplied may result in
internal damage to the TV set or cause it to fall, etc.
8 mm - 12 mm
Screw (supplied with the
Wall-mount bracket)
Mounting Hook
Hook attachment on rear of TV set
Transporting
• Before transporting the TV
set, disconnect all cables.
• Two or more people are
needed to transport a large
TV set.
• When transporting the TV
set by hand, hold it as
shown on the right. Do not
put stress on the LCD
panel.
• When lifting or moving the
TV set, hold it firmly from
the bottom.
• When transporting the TV
set, do not subject it to jolts
or excessive vibration.
• When transporting the TV
set for repairs or when
moving, pack it using the
original carton and pack ing
material.
Be sure to hold the
bottom of the panel, not
the front part.
Do not handle with dent
area.
Do not handle with the
transparent bottom part.
Ventilation
• Never cover the ventilation holes or insert anything in the
cabinet.
• Leave space around the TV set as shown below.
• It is strongly recommended that you use a Sony wallmount bracket in order to provide adequate air-circulation.
Installed on the wall
30 cm
10 cm 10 cm
10 cm
Leave at least this space around the set.
Installed with stand
30 cm
10 cm 10 cm 6 cm
Leave at least this space around the set.
• To ensure proper ventilation and prevent the collection of
dirt or dust:
– Do not lay the TV set flat, install upside down,
backwards, or sideways.
– Do not place the TV set on a shelf, rug, bed or in a
closet.
– Do not cover the TV set with a cloth, such as curtains,
or items such as newspapers, etc.
– Do not install the TV set as shown below.
Air circulation is blocked.
Wall Wall
Continued
GB
9
AC power cord
Handle the AC power cord and outlet as follows in
order to avoid any risk of fire, electrical shock or
damage and/or injuries:
– The shape of AC pow er plug, which is supplied with the
TV set, varies depending on the regions.
– Use only Sony supplied AC power cords, not those of
other brands.
– Insert the plug fully into the AC power outlet.
– Operate the TV set on a 110–240 V AC supply only.
– When wiring cables, be sure to unplug the AC power
cord for your safety and take care not to catch your feet
on the cables.
– Disconnect the AC power cord from the AC power
outlet before working on or moving the TV set.
– Keep the AC power cord away from heat sources.
– Unplug the AC power plug and clean it regularly. If the
plug is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.
Notes
• Do not use the supplied AC power cord on any other
equipment.
• Do not pinch, bend, or twist the AC power cord
excessively. The core conductors may be exposed or
broken.
• Do not modify the AC power cord.
• Do not put anything heavy on the AC power cord.
• Do not pull on the AC power cord itself when
disconnecting the AC power cord.
• Do not connect too many appliances to the same AC
power outlet.
• Do not use a poor fitting AC power outlet.
Environment:
Places that are hot, humid, or excessively dusty; where
insects may enter; where it might be exposed to mechanical
vibration, near flammable objects (candles, etc). The TV
shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the TV.
Situation:
Do not use when your hands are wet, with the cabinet
removed, or with attachments not recommended by the
manufacturer. Disconnect the TV set from AC power outlet
and antenna during lightning storms.
Broken pieces:
• Do not throw anything at the TV set. The screen glass may
break by the impact and cause serious injury.
• If the surface of the TV set cracks, do not touch it until you
have unplugged the AC power cord. Otherwise electric
shock may result.
When not in use
• If you will not be using the TV set for several day s, the TV
set should be disconnected from the AC power for
environmental and safety reasons.
• As the TV set is not disconnected from the AC power
when the TV set is just turned off, pull the plug from the
AC power outlet to disconnect the TV set completely.
• However, some TV sets may have features that require the
TV set to be left in standby to work correctly.
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those listed below,
or the TV set may malfunction and cause a fire,
electrical shock, damage and/or injuries.
Location:
Outdoors (in direct sunlight), at the seashore, on a ship or
other vessel, inside a vehicle, in medical institutions,
unstable locations, near water, rain, moisture or smoke.
For children
• Do not allow children to climb on the TV set.
• Keep small accessories out of the reach of children, so that
they are not mistakenly swallowed.
If the following problems occur...
Turn off the TV set and unplug the AC power cord
immediately if any of the following problems occur.
Ask your dealer or Sony service centre to have it
checked by qualified service personnel.
When:
– AC power cord is damaged.
– Poor fitting of AC power outlet.
– TV set is damaged by being dropped, hit or having
something thrown at it.
– Any liquid or solid object falls through openings in the
cabinet.
10
GB
Precautions
Viewing the TV
• View the TV in moderate light, as viewing the TV in poor
light or during long period of time, strains your eyes.
• When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.
LCD Screen
• Although the LCD screen is made with high-precision
technology and 99.99% or more of the pixels are effective,
black dots may appear or bright points of light (red, blue,
or green) may appear constantly on the LCD screen. This
is a structural property of the LCD screen and is not a
malfunction.
• Do not push or scratch the front filter, or place objects on
top of this TV set. The image may be uneven or the LCD
screen may be damaged.
• If this TV set is used in a cold place, a smear may occur in
the picture or the picture may become dark. This does not
indicate a failure. These phenomena disappear as the
temperature rises.
• Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
• The screen and cabinet get warm when this TV set is in
use. This is not a malfunction.
• The LCD screen contains a small amount of liquid crystal.
Mercury is sometimes contained depending on the kind of
fluorescent tubes. Follow your local ordinances and
regulations for disposal.
Optional Equipment
Keep optional components or any equipment emitting
electromagnetic radiation away from the TV set. Otherwise
picture distortion and/or noisy sound may occur.
Handling and cleaning the screen surface/cabinet of
the TV set
Be sure to unplug the AC power cord connected to the TV set
from AC power outlet before cleaning.
To avoid material degradation or screen coating degradation,
observe the following precautions.
• To remove dust from the screen surface/cabinet, wipe
gently with a soft cloth. If dust is persistent, wipe with a
soft cloth slightly moistened with a diluted mild detergent
solution.
• Never use any type of abrasive pad, alkaline/acid cleaner,
scouring powder, or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using such materials or
maintaining prolonged contact with rubber or vinyl
materials may result in damage to the screen surface and
cabinet material.
• When adjusting the angle of the TV set, move it slowly so
as to prevent the TV set from moving or slipping off from
its table stand.
11
GB
Overview of the remote
1 "/1 — TV standby
Turns the TV on and off from standby mode.
2 BRAVIA Sync
• m/N/X/M/x: You can operate the BRAVIA Sync-compatible
equipment or DIGITAL MEDIA PORT-compatible equipment that is
connected to the TV.
• SYNC MENU: Displays the menu of connected HDMI equipment. While
viewing other input screens or TV programmes, “HDMI Device
Selection” is displayed when the button is pressed.
• THEATRE: You can set Theatre Mode on or off. When Theatre Mode is set
to on, the optimum audio output (if the TV is connected with an audio
system using an HDMI cable) and picture quality for film-based contents
are automatically set.
z
If you turn the TV off, Theatre Mode is also turned off.
~
Control for HDMI (BRAVIA Sync) is only available with the connected Sony
equipment that has the BRAVIA Sync logo or is compatible with control for
HDMI.
3 — Picture freeze
Press to freeze the TV picture. The frozen picture is displayed in full size, and
a moving picture is displayed in the small window.
To remove the small window, press once. To return to single picture mode,
press again.
~
This function is not available for Twin Picture or PC input source.
4 AUDIO — Dual Sound (page 26)
5 / — Input select / Text hold
• In TV mode (page 20): Displays the available input and selects the input
source.
• In Text mode (page 15): Holds the current page.
6 F/f/G/g/ (page22)
7 TOOLS (page 16, 20)
z
The number 5, N, PROG + and AUDIO
buttons have tactile dots. Use the tactile dots
as references when operating the TV.
Enables you to access various viewing options and change/make adjustments
according to the source and screen mode.
8 MENU (page 22)
9 Coloured buttons (page 15)
0 Number buttons
• In TV mode: Selects channels. For channel numbers 10 and above, enter
the second digit quickly.
• In Text mode: Enters the page number to select the page.
12
GB
Loading...